| Age | Commit message (Collapse) | Author |
|---|
|
Naked scx_root dereferences are being used as temporary markers to indicate
that they need to be updated to point to the right scheduler instance.
Explain the situation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
|
|
Record trace_clock information in the trace_scratch area and recover
the trace_clock when boot, so that reader can docode the timestamp
correctly.
Note that since most trace_clocks records the timestamp in nano-
seconds, this is not a bug. But some trace_clock, like counter and
tsc will record the counter value. Only for those trace_clock user
needs this information.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/174720625803.1925039.1815089037443798944.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Instead of find_first_bit() use the dedicated bitmap_empty(),
and make upper_empty() a nice one-liner.
While there, fix opencoded BITS_PER_TYPE().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250429195119.620204-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In preparation of hierarchical scheduling support, add @sch to scx_exit()
and friends:
- scx_exit/error() updated to take explicit @sch instead of assuming
scx_root.
- scx_kf_exit/error() added. These are to be used from kfuncs, don't take
@sch and internally determine the scx_sched instance to abort. Currently,
it's always scx_root but once multiple scheduler support is in place, it
will be the scx_sched instance that invoked the kfunc. This simplifies
many callsites and defers scx_sched lookup until error is triggered.
- @sch is propagated to ops_cpu_valid() and ops_sanitize_err(). The CPU
validity conditions in ops_cpu_valid() are factored into __cpu_valid() to
implement kf_cpu_valid() which is the counterpart to scx_kf_exit/error().
- All users are converted. Most conversions are straightforward.
check_rq_for_timeouts() and scx_softlockup() are updated to use explicit
rcu_dereference*(scx_root) for safety as they may execute asynchronous to
the exit path. scx_tick() is also updated to use rcu_dereference(). While
not strictly necessary due to the preceding scx_enabled() test and IRQ
disabled context, this removes the subtlety at no noticeable cost.
No behavior changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
__scx_exit() is the base exit implementation and there are three wrappers on
top of it - scx_exit(), __scx_error() and scx_error(). This is more
confusing than helpful especially given that there are only a couple users
of scx_exit() and __scx_error(). To simplify the situation:
- Make __scx_exit() take va_list and rename it to scx_vexit(). This is to
ease implementing more complex extensions on top.
- Make scx_exit() a varargs wrapper around __scx_exit(). scx_exit() now
takes both @kind and @exit_code.
- Convert existing scx_exit() and __scx_error() users to use the new
scx_exit().
- scx_error() remains unchanged.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
In preparation of hierarchical scheduling support, make SCX_CALL_OP*() take
explicit @sch instead of assuming scx_root. As scx_root is still the only
scheduler instance, this patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
- Always cache scx_root into local variable sch before using.
- Don't use scx_root if cached sch is available.
- Wrap !sch test with unlikely().
- Pass @scx into scx_cgroup_init/exit().
No behavior changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
With the goal of deprecating / removing VOLUNTARY preempt, live-patch
needs to stop relying on cond_resched() to make forward progress.
Instead, rely on schedule() with TASK_FREEZABLE set. Just like
live-patching, the freezer needs to be able to stop tasks in a safe /
known state.
[bigeasy: use likely() in __klp_sched_try_switch() and update comments]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250509113659.wkP_HJ5z@linutronix.de
|
|
Kindly inform the MSI driver that the domain is torn down, providing the
allocation context previously populated on domain creation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-5-maz@kernel.org
|
|
The current device MSI infrastructure is subtly broken, as it will issue an
.msi_prepare() callback into the MSI controller driver every time it needs
to allocate an MSI. That's pretty wrong, as the contract (or unwarranted
assumption, depending who you ask) between the MSI controller and the core
code is that .msi_prepare() is called exactly once per device.
This leads to some subtle breakage in some MSI controller drivers, as it
gives the impression that there are multiple endpoints sharing a bus
identifier (RID in PCI parlance, DID for GICv3+). It implies that whatever
allocation the ITS driver (for example) has done on behalf of these devices
cannot be undone, as there is no way to track the shared state. This is
particularly bad for wire-MSI devices, for which .msi_prepare() is called
for each input line.
To address this issue, move the call to .msi_prepare() to take place at the
point of irq domain allocation, which is the only place that makes
sense. The msi_alloc_info_t structure is made part of the
msi_domain_template, so that its life-cycle is that of the domain as well.
Finally, the msi_info::alloc_data field is made to point at this allocation
tracking structure, ensuring that it is carried around the block.
This is all pretty straightforward, except for the non-device-MSI
leftovers, which still have to call .msi_prepare() at the old spot. One
day...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-4-maz@kernel.org
|
|
The ITS driver currently nukes the structure representing an endpoint
device translating via an ITS on freeing the last LPI allocated for it.
That's an unfortunate state of affair, as it is pretty common for a driver
to allocate a single MSI, do something clever, teardown this MSI, and
reallocate a whole bunch of them. The NVME driver does exactly that,
amongst others.
What happens in that case is that the core code is accidentaly issuing
another .msi_prepare() call, even if it shouldn't. This luckily cancels
the above behaviour and hides the problem.
In order to fix the core code, start by implementing the new
.msi_teardown() callback. Nothing calls it yet, so a side effect is that
the its_dev structure will not be freed and that the DID will stay
mapped. Not a big deal, and this will be solved in following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-3-maz@kernel.org
|
|
While the MSI ops do have a .msi_prepare() callback that is responsible for
setting up the relevant (usually per-device) allocation, there is no
callback reversing this setup.
For this purpose, add .msi_teardown() callback.
In order to avoid breaking the ITS driver that suffers from related issues,
do not call the callback just yet.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-2-maz@kernel.org
|
|
Commit 8589e325ba4f ("genirq/manage: Rework irq_set_irq_wake()") updated
the irq_set_irq_wake() to use the new guards for locking the interrupt
descriptor.
However, in doing so it inadvertently changed irq_set_irq_wake() such that
the 'chip_bus_lock' is no longer acquired. This has caused system suspend
tests to fail on some Tegra platforms.
Fix this by correcting the guard used in irq_set_irq_wake() to ensure the
'chip_bus_lock' is held.
Fixes: 8589e325ba4f ("genirq/manage: Rework irq_set_irq_wake()")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250514095041.1109783-1-jonathanh@nvidia.com
|
|
Instead of hardcoding the list of kfuncs that need prog->aux passed to
them with a combination of fixup_kfunc_call adjustment + __ign suffix,
combine both in __prog suffix, which ignores the argument passed in, and
fixes it up to the prog->aux. This allows kfuncs to have the prog->aux
passed into them without having to touch the verifier.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250513142812.1021591-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The "suspend in progress" check in device_wakeup_enable() does not
cover hibernation, but arguably it should do that, so introduce
pm_sleep_transition_in_progress() covering transitions during both
system suspend and hibernation to use in there and use it also in
pm_debug_messages_should_print().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/7820474.EvYhyI6sBW@rjwysocki.net
[ rjw: Move the new function definition under CONFIG_PM_SLEEP ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- fprobe: Fix RCU warning message in list traversal
fprobe_module_callback() using hlist_for_each_entry_rcu() traverse
the fprobe list but it locks fprobe_mutex() instead of rcu lock
because it is enough. So add lockdep_is_held() to avoid warning.
- tracing: eprobe: Add missing trace_probe_log_clear for eprobe
__trace_eprobe_create() uses trace_probe_log but forgot to clear it
at exit. Add trace_probe_log_clear() calls.
- tracing: probes: Fix possible race in trace_probe_log APIs
trace_probe_log APIs are used in probe event (dynamic_events,
kprobe_events and uprobe_events) creation. Only dynamic_events uses
the dyn_event_ops_mutex mutex to serialize it. This makes kprobe and
uprobe events to lock the same mutex to serialize its creation to
avoid race in trace_probe_log APIs.
* tag 'probes-fixes-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix a possible race in trace_probe_log APIs
tracing: add missing trace_probe_log_clear for eprobes
tracing: fprobe: Fix RCU warning message in list traversal
|
|
syzkaller reported an issue:
WARNING: CPU: 3 PID: 5971 at kernel/trace/bpf_trace.c:1861 get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
Modules linked in:
CPU: 3 UID: 0 PID: 5971 Comm: syz-executor205 Not tainted 6.15.0-rc5-syzkaller-00038-g707df3375124 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:get_bpf_raw_tp_regs+0xa4/0x100 kernel/trace/bpf_trace.c:1861
RSP: 0018:ffffc90003636fa8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff81c6bc4c
RDX: ffff888032efc880 RSI: ffffffff81c6bc83 RDI: 0000000000000005
RBP: ffff88806a730860 R08: 0000000000000005 R09: 0000000000000003
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: ffffc90003637008 R15: 0000000000000900
FS: 0000000000000000(0000) GS:ffff8880d6cdf000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7baee09130 CR3: 0000000029f5a000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1934 [inline]
bpf_get_stack_raw_tp+0x24/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
__bpf_trace_run kernel/trace/bpf_trace.c:2363 [inline]
bpf_trace_run3+0x23f/0x5a0 kernel/trace/bpf_trace.c:2405
__bpf_trace_mmap_lock_acquire_returned+0xfc/0x140 include/trace/events/mmap_lock.h:47
__traceiter_mmap_lock_acquire_returned+0x79/0xc0 include/trace/events/mmap_lock.h:47
__do_trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
trace_mmap_lock_acquire_returned include/trace/events/mmap_lock.h:47 [inline]
__mmap_lock_do_trace_acquire_returned+0x138/0x1f0 mm/mmap_lock.c:35
__mmap_lock_trace_acquire_returned include/linux/mmap_lock.h:36 [inline]
mmap_read_trylock include/linux/mmap_lock.h:204 [inline]
stack_map_get_build_id_offset+0x535/0x6f0 kernel/bpf/stackmap.c:157
__bpf_get_stack+0x307/0xa10 kernel/bpf/stackmap.c:483
____bpf_get_stack kernel/bpf/stackmap.c:499 [inline]
bpf_get_stack+0x32/0x40 kernel/bpf/stackmap.c:496
____bpf_get_stack_raw_tp kernel/trace/bpf_trace.c:1941 [inline]
bpf_get_stack_raw_tp+0x124/0x160 kernel/trace/bpf_trace.c:1931
bpf_prog_ec3b2eefa702d8d3+0x43/0x47
Tracepoint like trace_mmap_lock_acquire_returned may cause nested call
as the corner case show above, which will be resolved with more general
method in the future. As a result, WARN_ON_ONCE will be triggered. As
Alexei suggested, remove the WARN_ON_ONCE first.
Fixes: 9594dc3c7e71 ("bpf: fix nested bpf tracepoints with per-cpu data")
Reported-by: syzbot+45b0c89a0fc7ae8dbadc@syzkaller.appspotmail.com
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250513042747.757042-1-chen.dylane@linux.dev
Closes: https://lore.kernel.org/bpf/8bc2554d-1052-4922-8832-e0078a033e1d@gmail.com
|
|
Right now, if the clocksource watchdog detects a clocksource skew, it might
perform a per CPU check, for example in the TSC case on x86. In other
words: supposing TSC is detected as unstable by the clocksource watchdog
running at CPU1, as part of marking TSC unstable the kernel will also run a
check of TSC readings on some CPUs to be sure it is synced between them
all.
But that check happens only on some CPUs, not all of them; this choice is
based on the parameter "verify_n_cpus" and in some random cpumask
calculation. So, the watchdog runs such per CPU checks on up to
"verify_n_cpus" random CPUs among all online CPUs, with the risk of
repeating CPUs (that aren't double checked) in the cpumask random
calculation.
But if "verify_n_cpus" > num_online_cpus(), it should skip the random
calculation and just go ahead and check the clocksource sync between
all online CPUs, without the risk of skipping some CPUs due to
duplicity in the random cpumask calculation.
Tests in a 4 CPU laptop with TSC skew detected led to some cases of the per
CPU verification skipping some CPU even with verify_n_cpus=8, due to the
duplicity on random cpumask generation. Skipping the randomization when the
number of online CPUs is smaller than verify_n_cpus, solves that.
Suggested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250323173857.372390-1-gpiccoli@igalia.com
|
|
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb894 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
|
|
Add a function for updating the Energy Model for a CPU after its
capacity has changed, which subsequently will be used by the
intel_pstate driver.
An EM_PERF_DOMAIN_ARTIFICIAL check is added to em_recalc_and_update()
to prevent it from calling em_compute_costs() for an "artificial" perf
domain with a NULL cb parameter which would cause it to crash.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/3637203.iIbC2pHGDl@rjwysocki.net
|
|
Move the check of the CPU capacity currently stored in the energy model
against the arch_scale_cpu_capacity() value to em_adjust_new_capacity()
so it will be done regardless of where the latter is called from.
This will be useful when a new em_adjust_new_capacity() caller is added
subsequently.
While at it, move the pd local variable declaration in
em_check_capacity_update() into the loop in which it is used.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/7810787.EvYhyI6sBW@rjwysocki.net
|
|
Introduce pm_suspend_in_progress() to be used for checking if a system-
wide suspend or resume transition is in progress, instead of comparing
pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net
|
|
Commit cdb8c100d8a4 ("include/linux/suspend.h: Only show pm_pr_dbg
messages at suspend/resume") caused PM debug messages to only be
printed during system-wide suspend and resume in progress, but it
forgot about hibernation.
Address this by adding a check for hibernation in progress to
pm_debug_messages_should_print().
Fixes: cdb8c100d8a4 ("include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/4998903.GXAFRqVoOG@rjwysocki.net
|
|
There are three cases in the genirq code when the irq, as an unsigned
integer variable, is converted to text representation by sprintf().
In two cases it uses '%d' specifier which is for signed values. While
it's not a problem right now, potentially it might be in the future
in case too big (> INT_MAX) number will appear there.
Consistently use '%u' format specifier for @irq which is declared as
unsigned int in all these cases.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250509154643.1499171-1-andriy.shevchenko@linux.intel.com
|
|
After the conversion to locking guards within the interrupt core code,
several builds with clang show the "Interrupts were enabled early"
WARN() in start_kernel() on boot.
In class_irqdesc_lock_constructor(), _t.flags is initialized via
__irq_get_desc_lock() within the _t initializer list. However, the C11
standard 6.7.9.23 states that the evaluation of the initialization list
expressions are indeterminately sequenced relative to one another,
meaning _t.flags could be initialized by __irq_get_desc_lock() then be
initialized to zero due to flags being absent from the initializer list.
To ensure _t.flags is consistently initialized, move the call to
__irq_get_desc_lock() and the assignment of its result to _t.lock out of
the designated initializer.
Fixes: 0f70a49f3fa3 ("genirq: Provide conditional lock guards")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250513-irq-guards-fix-flags-init-v1-1-1dca3f5992d6@kernel.org
|
|
Right now these are performed in kernel/fork.c which is odd and a
violation of separation of concerns, as well as preventing us from
integrating this and related logic into userland VMA testing going
forward.
There is a fly in the ointment - nommu - mmap.c is not compiled if
CONFIG_MMU not set, and neither is vma.c.
To square the circle, let's add a new file - vma_init.c. This will be
compiled for both CONFIG_MMU and nommu builds, and will also form part of
the VMA userland testing.
This allows us to de-duplicate code, while maintaining separation of
concerns and the ability for us to userland test this logic.
Update the VMA userland tests accordingly, additionally adding a
detach_free_vma() helper function to correctly detach VMAs before freeing
them in test code, as this change was triggering the assert for this.
[akpm@linux-foundation.org: remove stray newline, per Liam]
Link: https://lkml.kernel.org/r/f97b3a85a6da0196b28070df331b99e22b263be8.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is a key step in our being able to abstract and isolate VMA
allocation and destruction logic.
This function is the last one where vm_area_free() and vm_area_dup() are
directly referenced outside of mmap, so having this in mm allows us to
isolate these.
We do the same for the nommu version which is substantially simpler.
We place the declaration for dup_mmap() in mm/internal.h and have
kernel/fork.c import this in order to prevent improper use of this
functionality elsewhere in the kernel.
While we're here, we remove the useless #ifdef CONFIG_MMU check around
mmap_read_lock_maybe_expand() in mmap.c, mmap.c is compiled only if
CONFIG_MMU is set.
Link: https://lkml.kernel.org/r/e49aad3d00212f5539d9fa5769bfda4ce451db3e.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
cpuset memory pinning
Unlike sched_skip_vma_numa tracepoint which tracks skipped VMAs, this
tracks the task subjected to cpuset.mems pinning and prints out its
allowed memory node mask.
Link: https://lkml.kernel.org/r/20250424024523.2298272-3-libo.chen@oracle.com
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Srikanth Aithal <sraithal@amd.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "sched/numa: Skip VMA scanning on memory pinned to one NUMA
node via cpuset.mems", v5.
This patch (of 2):
When the memory of the current task is pinned to one NUMA node by cgroup,
there is no point in continuing the rest of VMA scanning and hinting page
faults as they will just be overhead. With this change, there will be no
more unnecessary PTE updates or page faults in this scenario.
We have seen up to a 6x improvement on a typical java workload running on
VMs with memory and CPU pinned to one NUMA node via cpuset in a two-socket
AARCH64 system. With the same pinning, on a 18-cores-per-socket Intel
platform, we have seen 20% improvment in a microbench that creates a
30-vCPU selftest KVM guest with 4GB memory, where each vCPU reads 4KB
pages in a fixed number of loops.
Link: https://lkml.kernel.org/r/20250424024523.2298272-1-libo.chen@oracle.com
Link: https://lkml.kernel.org/r/20250424024523.2298272-2-libo.chen@oracle.com
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Link: https://lkml.kernel.org/r/20250423133821.789413-5-dwmw2@infradead.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Ruihan Li <lrh2000@pku.edu.cn>
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have all generic code in place now to support Kexec with KHO. This
patch adds a config option that depends on architecture support to enable
KHO support.
Link: https://lkml.kernel.org/r/20250509074635.3187114-9-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Kexec has 2 modes: A user space driven mode and a kernel driven mode. For
the kernel driven mode, kernel code determines the physical addresses of
all target buffers that the payload gets copied into.
With KHO, we can only safely copy payloads into the "scratch area". Teach
the kexec file loader about it, so it only allocates for that area. In
addition, enlighten it with support to ask the KHO subsystem for its
respective payloads to copy into target memory. Also teach the KHO
subsystem how to fill the images for file loads.
Link: https://lkml.kernel.org/r/20250509074635.3187114-8-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce APIs allowing KHO users to preserve memory across kexec and get
access to that memory after boot of the kexeced kernel
kho_preserve_folio() - record a folio to be preserved over kexec
kho_restore_folio() - recreates the folio from the preserved memory
kho_preserve_phys() - record physically contiguous range to be
preserved over kexec.
The memory preservations are tracked by two levels of xarrays to manage
chunks of per-order 512 byte bitmaps. For instance if PAGE_SIZE = 4096,
the entire 1G order of a 1TB x86 system would fit inside a single 512 byte
bitmap. For order 0 allocations each bitmap will cover 16M of address
space. Thus, for 16G of memory at most 512K of bitmap memory will be
needed for order 0.
At serialization time all bitmaps are recorded in a linked list of pages
for the next kernel to process and the physical address of the list is
recorded in KHO FDT.
The next kernel then processes that list, reserves the memory ranges and
later, when a user requests a folio or a physical range, KHO restores
corresponding memory map entries.
Link: https://lkml.kernel.org/r/20250509074635.3187114-7-changyuanl@google.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When we have a KHO kexec, we get an FDT blob and scratch region to
populate the state of the system. Provide helper functions that allow
architecture code to easily handle memory reservations based on them and
give device drivers visibility into the KHO FDT and memory reservations so
they can recover their own state.
Include a fix from Arnd Bergmann <arnd@arndb.de>
https://lore.kernel.org/lkml/20250424093302.3894961-1-arnd@kernel.org/.
Link: https://lkml.kernel.org/r/20250509074635.3187114-6-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the infrastructure to generate Kexec HandOver metadata. Kexec
HandOver is a mechanism that allows Linux to preserve state - arbitrary
properties as well as memory locations - across kexec.
It does so using 2 concepts:
1) KHO FDT - Every KHO kexec carries a KHO specific flattened device tree
blob that describes preserved memory regions. Device drivers can
register to KHO to serialize and preserve their states before kexec.
2) Scratch Regions - CMA regions that we allocate in the first kernel.
CMA gives us the guarantee that no handover pages land in those
regions, because handover pages must be at a static physical memory
location. We use these regions as the place to load future kexec
images so that they won't collide with any handover data.
Link: https://lkml.kernel.org/r/20250509074635.3187114-5-changyuanl@google.com
Signed-off-by: Alexander Graf <graf@amazon.com>
Co-developed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Pratyush Yadav <ptyadav@amazon.de>
Signed-off-by: Pratyush Yadav <ptyadav@amazon.de>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is possible for a reclaimer to cause demotions of an lruvec belonging
to a cgroup with cpuset.mems set to exclude some nodes. Attempt to apply
this limitation based on the lruvec's memcg and prevent demotion.
Notably, this may still allow demotion of shared libraries or any memory
first instantiated in another cgroup. This means cpusets still cannot
cannot guarantee complete isolation when demotion is enabled, and the docs
have been updated to reflect this.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently - with the noted exceptions.
Note on locking:
The cgroup_get_e_css reference protects the css->effective_mems, and calls
of this interface would be subject to the same race conditions associated
with a non-atomic access to cs->effective_mems.
So while this interface cannot make strong guarantees of correctness, it
can therefore avoid taking a global or rcu_read_lock for performance.
Link: https://lkml.kernel.org/r/20250424202806.52632-3-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Suggested-by: Shakeel Butt <shakeel.butt@linux.dev>
Suggested-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "vmscan: enforce mems_effective during demotion", v5.
Change reclaim to respect cpuset.mems_effective during demotion when
possible. Presently, reclaim explicitly ignores cpuset.mems_effective
when demoting, which may cause the cpuset settings to violated.
Implement cpuset_node_allowed() to check the cpuset.mems_effective
associated wih the mem_cgroup of the lruvec being scanned. This only
applies to cgroup/cpuset v2, as cpuset exists in a different hierarchy
than mem_cgroup in v1.
This requires renaming the existing cpuset_node_allowed() to be
cpuset_current_now_allowed() - which is more descriptive anyway - to
implement the new cpuset_node_allowed() which takes a target cgroup.
This patch (of 2):
Rename cpuset_node_allowed to reflect that the function checks the current
task's cpuset.mems. This allows us to make a new cpuset_node_allowed
function that checks a target cgroup's cpuset.mems.
Link: https://lkml.kernel.org/r/20250424202806.52632-1-gourry@gourry.net
Link: https://lkml.kernel.org/r/20250424202806.52632-2-gourry@gourry.net
Signed-off-by: Gregory Price <gourry@gourry.net>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch introduces a new set of kfuncs for working with dynptrs in
BPF programs, enabling reading variable-length user or kernel data
into dynptr directly. To enable memory-safety, verifier allows only
constant-sized reads via existing bpf_probe_read_{user|kernel} etc.
kfuncs, dynptr-based kfuncs allow dynamically-sized reads without memory
safety shortcomings.
The following kfuncs are introduced:
* `bpf_probe_read_kernel_dynptr()`: probes kernel-space data into a dynptr
* `bpf_probe_read_user_dynptr()`: probes user-space data into a dynptr
* `bpf_probe_read_kernel_str_dynptr()`: probes kernel-space string into
a dynptr
* `bpf_probe_read_user_str_dynptr()`: probes user-space string into a
dynptr
* `bpf_copy_from_user_dynptr()`: sleepable, copies user-space data into
a dynptr for the current task
* `bpf_copy_from_user_str_dynptr()`: sleepable, copies user-space string
into a dynptr for the current task
* `bpf_copy_from_user_task_dynptr()`: sleepable, copies user-space data
of the task into a dynptr
* `bpf_copy_from_user_task_str_dynptr()`: sleepable, copies user-space
string of the task into a dynptr
The implementation is built on two generic functions:
* __bpf_dynptr_copy
* __bpf_dynptr_copy_str
These functions take function pointers as arguments, enabling the
copying of data from various sources, including both kernel and user
space.
Use __always_inline for generic functions and callbacks to make sure the
compiler doesn't generate indirect calls into callbacks, which is more
expensive, especially on some kernel configurations. Inlining allows
compiler to put direct calls into all the specific callback implementations
(copy_user_data_sleepable, copy_user_data_nofault, and so on).
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20250512205348.191079-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make bpf_dynptr_slice_rdwr, bpf_dynptr_check_off_len and
__bpf_dynptr_write available outside of the helpers.c by
adding their prototypes into linux/include/bpf.h.
bpf_dynptr_check_off_len() implementation is moved to header and made
inline explicitly, as small function should typically be inlined.
These functions are going to be used from bpf_trace.c in the next
patch of this series.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20250512205348.191079-2-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"A little bit invasive for rc6 but they're important fixes, pass tests
fine and won't break anything outside sched_ext:
- scx_bpf_cpuperf_set() calls internal functions that require the rq
to be locked. It assumed that the BPF caller has rq locked but
that's not always true. Fix it by tracking whether rq is currently
held by the CPU and grabbing it if necessary
- bpf_iter_scx_dsq_new() was leaving the DSQ iterator in an
uninitialized state after an error. However, next() and destroy()
can be called on an iterator which failed initialization and thus
they always need to be initialized even after an init error. Fix by
always initializing the iterator
- Remove duplicate BTF_ID_FLAGS() entries"
* tag 'sched_ext-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: bpf_iter_scx_dsq_new() should always initialize iterator
sched_ext: Fix rq lock state in hotplug ops
sched_ext: Remove duplicate BTF_ID_FLAGS definitions
sched_ext: Fix missing rq lock in scx_bpf_cpuperf_set()
sched_ext: Track currently locked rq
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"One low-risk patch to fix a cpuset bug where it over-eagerly tries to
modify CPU affinity of kernel threads"
* tag 'cgroup-for-6.15-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Extend kthread_is_per_cpu() check to all PF_NO_SETAFFINITY tasks
|
|
With CONFIG_GENDWARFKSYMS, __gendwarfksyms_ptr variables are
added to the kernel in EXPORT_SYMBOL() to ensure DWARF type
information is available for exported symbols in the TUs where
they're actually exported. These symbols are dropped when linking
vmlinux, but dangling references to them remain in DWARF.
With CONFIG_DEBUG_INFO_BTF enabled on X86, pahole versions after
commit 47dcb534e253 ("btf_encoder: Stop indexing symbols for
VARs") and before commit 9810758003ce ("btf_encoder: Verify 0
address DWARF variables are in ELF section") place these symbols
in the .data..percpu section, which results in an "Invalid
offset" error in btf_datasec_check_meta() during boot, as all
the variables are at zero offset and have non-zero size. If
CONFIG_DEBUG_INFO_BTF_MODULES is enabled, this also results in a
failure to load modules with:
failed to validate module [$module] BTF: -22
As the issue occurs in pahole v1.28 and the fix was merged
after v1.29 was released, require pahole <v1.28 or >v1.29 when
GENDWARFKSYMS is enabled with DEBUG_INFO_BTF on X86.
Reported-by: Paolo Pisati <paolo.pisati@canonical.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This user of SHA-256 does not support any other algorithm, so the
crypto_shash abstraction provides no value. Just use the SHA-256 library
API instead, which is much simpler and easier to use.
Tested with '/sbin/kexec --kexec-file-syscall'.
Link: https://lkml.kernel.org/r/20250428185721.844686-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When updating `watchdog_thresh`, there is a race condition between writing
the new `watchdog_thresh` value and stopping the old watchdog timer. If
the old timer triggers during this window, it may falsely detect a
softlockup due to the old interval and the new `watchdog_thresh` value
being used. The problem can be described as follow:
# We asuume previous watchdog_thresh is 60, so the watchdog timer is
# coming every 24s.
echo 10 > /proc/sys/kernel/watchdog_thresh (User space)
|
+------>+ update watchdog_thresh (We are in kernel now)
|
| # using old interval and new `watchdog_thresh`
+------>+ watchdog hrtimer (irq context: detect softlockup)
|
|
+-------+
|
|
+ softlockup_stop_all
To fix this problem, introduce a shadow variable for `watchdog_thresh`.
The update to the actual `watchdog_thresh` is delayed until after the old
timer is stopped, preventing false positives.
The following testcase may help to understand this problem.
---------------------------------------------
echo RT_RUNTIME_SHARE > /sys/kernel/debug/sched/features
echo -1 > /proc/sys/kernel/sched_rt_runtime_us
echo 0 > /sys/kernel/debug/sched/fair_server/cpu3/runtime
echo 60 > /proc/sys/kernel/watchdog_thresh
taskset -c 3 chrt -r 99 /bin/bash -c "while true;do true; done" &
echo 10 > /proc/sys/kernel/watchdog_thresh &
---------------------------------------------
The test case above first removes the throttling restrictions for
real-time tasks. It then sets watchdog_thresh to 60 and executes a
real-time task ,a simple while(1) loop, on cpu3. Consequently, the final
command gets blocked because the presence of this real-time thread
prevents kworker:3 from being selected by the scheduler. This eventually
triggers a softlockup detection on cpu3 due to watchdog_timer_fn operating
with inconsistent variable - using both the old interval and the updated
watchdog_thresh simultaneously.
[nysal@linux.ibm.com: fix the SOFTLOCKUP_DETECTOR=n case]
Link: https://lkml.kernel.org/r/20250502111120.282690-1-nysal@linux.ibm.com
Link: https://lkml.kernel.org/r/20250421035021.3507649-1-luogengkun@huaweicloud.com
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: "Nysal Jan K.A." <nysal@linux.ibm.com>
Cc: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a spelling mistake in a pr_warn message. Fix it.
Link: https://lkml.kernel.org/r/20250418120331.535086-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The last use of relay_late_setup_files() was removed in 2018 by commit
2b47733045aa ("drm/i915/guc: Merge log relay file and channel creation")
Remove it and the helper it used.
relay_late_setup_files() was used for eventually registering 'buffer only'
channels. With it gone, delete the docs that explain how to do that.
Which suggests it should be possible to lose the 'has_base_filename'
flags.
(Are there any other uses??)
Link: https://lkml.kernel.org/r/20250418234932.490863-1-linux@treblig.org
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Inspired by mutex blocker tracking[1], this patch makes a trade-off to
balance the overhead and utility of the hung task detector.
Unlike mutexes, semaphores lack explicit ownership tracking, making it
challenging to identify the root cause of hangs. To address this, we
introduce a last_holder field to the semaphore structure, which is updated
when a task successfully calls down() and cleared during up().
The assumption is that if a task is blocked on a semaphore, the holders
must not have released it. While this does not guarantee that the last
holder is one of the current blockers, it likely provides a practical hint
for diagnosing semaphore-related stalls.
With this change, the hung task detector can now show blocker task's info
like below:
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked for more than 120 seconds.
[Tue Apr 8 12:19:07 2025] Tainted: G E 6.14.0-rc6+ #1
[Tue Apr 8 12:19:07 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Tue Apr 8 12:19:07 2025] task:cat state:D stack:0 pid:945 tgid:945 ppid:828 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0xe3/0xf0
[Tue Apr 8 12:19:07 2025] ? __folio_mod_stat+0x2a/0x80
[Tue Apr 8 12:19:07 2025] ? set_ptes.constprop.0+0x27/0x90
[Tue Apr 8 12:19:07 2025] __down_common+0x155/0x280
[Tue Apr 8 12:19:07 2025] down+0x53/0x70
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x23/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f419478f46e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007fff1c4d2668 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f419478f46e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f4194683000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f4194683000 R08: 00007f4194682010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked on a semaphore likely last held by task cat:938
[Tue Apr 8 12:19:07 2025] task:cat state:S stack:0 pid:938 tgid:938 ppid:584 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] ? _raw_spin_unlock_irqrestore+0xe/0x40
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0x77/0xf0
[Tue Apr 8 12:19:07 2025] ? __pfx_process_timeout+0x10/0x10
[Tue Apr 8 12:19:07 2025] msleep_interruptible+0x49/0x60
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x2d/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f7c584a646e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007ffdba8ce158 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f7c584a646e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f7c5839a000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f7c5839a000 R08: 00007f7c58399010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
[1] https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com
Link: https://lkml.kernel.org/r/20250414145945.84916-3-ioworker0@gmail.com
Signed-off-by: Mingzhe Yang <mingzhe.yang@ly.com>
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: Zi Li <amaindex@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "hung_task: extend blocking task stacktrace dump to
semaphore", v5.
Inspired by mutex blocker tracking[1], this patch series extend the
feature to not only dump the blocker task holding a mutex but also to
support semaphores. Unlike mutexes, semaphores lack explicit ownership
tracking, making it challenging to identify the root cause of hangs. To
address this, we introduce a last_holder field to the semaphore structure,
which is updated when a task successfully calls down() and cleared during
up().
The assumption is that if a task is blocked on a semaphore, the holders
must not have released it. While this does not guarantee that the last
holder is one of the current blockers, it likely provides a practical hint
for diagnosing semaphore-related stalls.
With this change, the hung task detector can now show blocker task's info
like below:
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked for more than 120 seconds.
[Tue Apr 8 12:19:07 2025] Tainted: G E 6.14.0-rc6+ #1
[Tue Apr 8 12:19:07 2025] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Tue Apr 8 12:19:07 2025] task:cat state:D stack:0 pid:945 tgid:945 ppid:828 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0xe3/0xf0
[Tue Apr 8 12:19:07 2025] ? __folio_mod_stat+0x2a/0x80
[Tue Apr 8 12:19:07 2025] ? set_ptes.constprop.0+0x27/0x90
[Tue Apr 8 12:19:07 2025] __down_common+0x155/0x280
[Tue Apr 8 12:19:07 2025] down+0x53/0x70
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x23/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f419478f46e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007fff1c4d2668 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f419478f46e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f4194683000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f4194683000 R08: 00007f4194682010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
[Tue Apr 8 12:19:07 2025] INFO: task cat:945 blocked on a semaphore likely last held by task cat:938
[Tue Apr 8 12:19:07 2025] task:cat state:S stack:0 pid:938 tgid:938 ppid:584 task_flags:0x400000 flags:0x00000000
[Tue Apr 8 12:19:07 2025] Call Trace:
[Tue Apr 8 12:19:07 2025] <TASK>
[Tue Apr 8 12:19:07 2025] __schedule+0x491/0xbd0
[Tue Apr 8 12:19:07 2025] ? _raw_spin_unlock_irqrestore+0xe/0x40
[Tue Apr 8 12:19:07 2025] schedule+0x27/0xf0
[Tue Apr 8 12:19:07 2025] schedule_timeout+0x77/0xf0
[Tue Apr 8 12:19:07 2025] ? __pfx_process_timeout+0x10/0x10
[Tue Apr 8 12:19:07 2025] msleep_interruptible+0x49/0x60
[Tue Apr 8 12:19:07 2025] read_dummy_semaphore+0x2d/0x60
[Tue Apr 8 12:19:07 2025] full_proxy_read+0x5f/0xa0
[Tue Apr 8 12:19:07 2025] vfs_read+0xbc/0x350
[Tue Apr 8 12:19:07 2025] ? __count_memcg_events+0xa5/0x140
[Tue Apr 8 12:19:07 2025] ? count_memcg_events.constprop.0+0x1a/0x30
[Tue Apr 8 12:19:07 2025] ? handle_mm_fault+0x180/0x260
[Tue Apr 8 12:19:07 2025] ksys_read+0x66/0xe0
[Tue Apr 8 12:19:07 2025] do_syscall_64+0x51/0x120
[Tue Apr 8 12:19:07 2025] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[Tue Apr 8 12:19:07 2025] RIP: 0033:0x7f7c584a646e
[Tue Apr 8 12:19:07 2025] RSP: 002b:00007ffdba8ce158 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[Tue Apr 8 12:19:07 2025] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f7c584a646e
[Tue Apr 8 12:19:07 2025] RDX: 0000000000020000 RSI: 00007f7c5839a000 RDI: 0000000000000003
[Tue Apr 8 12:19:07 2025] RBP: 00007f7c5839a000 R08: 00007f7c58399010 R09: 0000000000000000
[Tue Apr 8 12:19:07 2025] R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
[Tue Apr 8 12:19:07 2025] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
[Tue Apr 8 12:19:07 2025] </TASK>
This patch (of 3):
This patch replaces 'struct mutex *blocker_mutex' with 'unsigned long
blocker', as only one blocker is active at a time.
The blocker filed can store both the lock addrees and the lock type, with
LSB used to encode the type as Masami suggested, making it easier to
extend the feature to cover other types of locks.
Also, once the lock type is determined, we can directly extract the
address and cast it to a lock pointer ;)
Link: https://lkml.kernel.org/r/20250414145945.84916-1-ioworker0@gmail.com
Link: https://lore.kernel.org/all/174046694331.2194069.15472952050240807469.stgit@mhiramat.tok.corp.google.com [1]
Link: https://lkml.kernel.org/r/20250414145945.84916-2-ioworker0@gmail.com
Signed-off-by: Mingzhe Yang <mingzhe.yang@ly.com>
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: Zi Li <amaindex@outlook.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
coredump_task_exit()
This reduces single-threaded overhead as it avoids one lock+irq trip on
exit.
It also improves scalability of spawning and killing threads within one
process (just shy of 5% when doing it on 24 cores on my test jig).
Both routines are moved below kcov and kmsan exit, which should be
harmless.
Link: https://lkml.kernel.org/r/20250319195436.1864415-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
