summaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2021-10-01bpf/tests: Add test of ALU shifts with operand register aliasingJohan Almbladh
This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the case when the two operands are the same register. Mainly intended to test JITs that implement ALU64 shifts with 32-bit CPU instructions. Also renamed related helper functions for consistency with the new tests. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-10-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add exhaustive tests of BPF_ATOMIC register combinationsJohan Almbladh
This patch adds tests of all register combinations for BPF_ATOMIC operations on both BPF_W and BPF_DW sizes. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-9-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add exhaustive tests of ALU register combinationsJohan Almbladh
This patch replaces the current register combination test with new exhaustive tests. Before, only a subset of register combinations was tested for ALU64 DIV. Now, all combinatons of operand registers are tested, including the case when they are the same, and for all ALU32 and ALU64 operations. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-8-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Minor restructuring of ALU testsJohan Almbladh
This patch moves the ALU LSH/RSH/ARSH reference computations into the common reference value function. Also fix typo in constants so they now have the intended values. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-7-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add more tests for ALU and ATOMIC register clobberingJohan Almbladh
This patch expands the register-clobbering-during-function-call tests to cover more all ALU32/64 MUL, DIV and MOD operations and all ATOMIC operations. In short, if a JIT implements a complex operation with a call to an external function, it must make sure to save and restore all its caller-saved registers that may be clobbered by the call. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-6-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add tests to check source register zero-extensionJohan Almbladh
This patch adds tests to check that the source register is preserved when zero-extending a 32-bit value. In particular, it checks that the source operand is not zero-extended in-place. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-5-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudesJohan Almbladh
This patch adds a series of test to verify the operation of BPF_ATOMIC with BPF_DW and BPF_W sizes, for all power-of-two magnitudes of the register value operand. Also fixes a confusing typo in the comment for a related test. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-4-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add zero-extension checks in BPF_ATOMIC testsJohan Almbladh
This patch updates the existing tests of BPF_ATOMIC operations to verify that a 32-bit register operand is properly zero-extended. In particular, it checks the operation on archs that require 32-bit operands to be properly zero-/sign-extended or the result is undefined, e.g. MIPS64. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-3-johan.almbladh@anyfinetworks.com
2021-10-01bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizesJohan Almbladh
This patch adds a series of tests to verify the behavior of BPF_LDX and BPF_STX with BPF_B//W sizes in isolation. In particular, it checks that BPF_LDX zero-extendeds the result, and that BPF_STX does not overwrite adjacent bytes in memory. BPF_ST and operations on BPF_DW size are deemed to be sufficiently tested by existing tests. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211001130348.3670534-2-johan.almbladh@anyfinetworks.com
2021-09-30kprobes: treewide: Replace arch_deref_entry_point() with ↵Masami Hiramatsu
dereference_symbol_descriptor() ~15 years ago kprobes grew the 'arch_deref_entry_point()' __weak function: 3d7e33825d87: ("jprobes: make jprobes a little safer for users") But this is just open-coded dereference_symbol_descriptor() in essence, and its obscure nature was causing bugs. Just use the real thing and remove arch_deref_entry_point(). Link: https://lkml.kernel.org/r/163163043630.489837.7924988885652708696.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-28bpf: Replace "want address" users of BPF_CAST_CALL with BPF_CALL_IMMKees Cook
In order to keep ahead of cases in the kernel where Control Flow Integrity (CFI) may trip over function call casts, enabling -Wcast-function-type is helpful. To that end, BPF_CAST_CALL causes various warnings and is one of the last places in the kernel triggering this warning. Most places using BPF_CAST_CALL actually just want a void * to perform math on. It's not actually performing a call, so just use a different helper to get the void *, by way of the new BPF_CALL_IMM() helper, which can clean up a common copy/paste idiom as well. This change results in no object code difference. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://github.com/KSPP/linux/issues/20 Link: https://lore.kernel.org/lkml/CAEf4Bzb46=-J5Fxc3mMZ8JQPtK1uoE0q6+g6WPz53Cvx=CBEhw@mail.gmail.com Link: https://lore.kernel.org/bpf/20210928230946.4062144-2-keescook@chromium.org
2021-09-28bpf/tests: Add tail call limit test with external function callJohan Almbladh
This patch adds a tail call limit test where the program also emits a BPF_CALL to an external function prior to the tail call. Mainly testing that JITed programs preserve its internal register state, for example tail call count, across such external calls. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-15-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Fix error in tail call limit testsJohan Almbladh
This patch fixes an error in the tail call limit test that caused the test to fail on for x86-64 JIT. Previously, the register R0 was used to report the total number of tail calls made. However, after a tail call fall-through, the value of the R0 register is undefined. Now, all tail call error path tests instead use context state to store the count. Fixes: 874be05f525e ("bpf, tests: Add tail call test suite") Reported-by: Paul Chaignon <paul@cilium.io> Reported-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/bpf/20210914091842.4186267-14-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add more BPF_END byte order conversion testsJohan Almbladh
This patch adds tests of the high 32 bits of 64-bit BPF_END conversions. It also adds a mirrored set of tests where the source bytes are reversed. The MSB of each byte is now set on the high word instead, possibly affecting sign-extension during conversion in a different way. Mainly for JIT testing. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-13-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Expand branch conversion JIT testJohan Almbladh
This patch expands the branch conversion test introduced by 66e5eb84 ("bpf, tests: Add branch conversion JIT test"). The test now includes a JMP with maximum eBPF offset. This triggers branch conversion for the 64-bit MIPS JIT. Additional variants are also added for cases when the branch is taken or not taken. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-12-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add JMP tests with degenerate conditionalJohan Almbladh
This patch adds a set of tests for JMP and JMP32 operations where the branch decision is know at JIT time. Mainly testing JIT behaviour. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-11-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add JMP tests with small offsetsJohan Almbladh
This patch adds a set of tests for JMP to verify that the JITed jump offset is calculated correctly. We pretend that the verifier has inserted any zero extensions to make the jump-over operations JIT to one instruction each, in order to control the exact JITed jump offset. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-10-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add test case flag for verifier zero-extensionJohan Almbladh
This patch adds a new flag to indicate that the verified did insert zero-extensions, even though the verifier is not being run for any of the tests. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-9-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add exhaustive test of LD_IMM64 immediate magnitudesJohan Almbladh
This patch adds a test for the 64-bit immediate load, a two-instruction operation, to verify correctness for all possible magnitudes of the immediate operand. Mainly intended for JIT testing. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-8-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add staggered JMP and JMP32 testsJohan Almbladh
This patch adds a new type of jump test where the program jumps forwards and backwards with increasing offset. It mainly tests JITs where a relative jump may generate different JITed code depending on the offset size, read MIPS. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-7-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add exhaustive tests of JMP operand magnitudesJohan Almbladh
This patch adds a set of tests for conditional JMP and JMP32 operations to verify correctness for all possible magnitudes of the immediate and register operands. Mainly intended for JIT testing. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-6-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add exhaustive tests of ALU operand magnitudesJohan Almbladh
This patch adds a set of tests for ALU64 and ALU32 arithmetic and bitwise logical operations to verify correctness for all possible magnitudes of the register and immediate operands. Mainly intended for JIT testing. The patch introduces a pattern generator that can be used to drive extensive tests of different kinds of operations. It is parameterized to allow tuning of the operand combinations to test. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-5-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Add exhaustive tests of ALU shift valuesJohan Almbladh
This patch adds a set of tests for ALU64 and ALU32 shift operations to verify correctness for all possible values of the shift value. Mainly intended for JIT testing. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-4-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Reduce memory footprint of test suiteJohan Almbladh
The test suite used to call any fill_helper callbacks to generate eBPF program data for all test cases at once. This caused ballooning memory requirements as more extensive test cases were added. Now the each fill_helper is called before the test is run and the allocated memory released afterwards, before the next test case is processed. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-3-johan.almbladh@anyfinetworks.com
2021-09-28bpf/tests: Allow different number of runs per test caseJohan Almbladh
This patch allows a test cast to specify the number of runs to use. For compatibility with existing test case definitions, the default value 0 is interpreted as MAX_TESTRUNS. A reduced number of runs is useful for complex test programs where 1000 runs may take a very long time. Instead of reducing what is tested, one can instead reduce the number of times the test is run. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210914091842.4186267-2-johan.almbladh@anyfinetworks.com
2021-09-25fortify: Move remaining fortify helpers into fortify-string.hKees Cook
When commit a28a6e860c6c ("string.h: move fortified functions definitions in a dedicated header.") moved the fortify-specific code, some helpers were left behind. Move the remaining fortify-specific helpers into fortify-string.h so they're together where they're used. This requires that any FORTIFY helper function prototypes be conditionally built to avoid "no prototype" warnings. Additionally removes unused helpers. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Axtens <dja@axtens.net> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Francis Laniel <laniel_francis@privacyrequired.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2021-09-25lib/string: Move helper functions out of string.cKees Cook
The core functions of string.c are those that may be implemented by per-architecture functions, or overloaded by FORTIFY_SOURCE. As a result, it needs to be built with __NO_FORTIFY. Without this, macros will collide with function declarations. This was accidentally working due to -ffreestanding (on some architectures). Make this deterministic by explicitly setting __NO_FORTIFY and move all the helper functions into string_helpers.c so that they gain the fortification coverage they had been missing. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Andy Lavr <andy.lavr@gmail.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2021-09-24lib/zlib_inflate/inffast: check config in C to avoid unused function warningPaul Menzel
Building Linux for ppc64le with Ubuntu clang version 12.0.0-3ubuntu1~21.04.1 shows the warning below. arch/powerpc/boot/inffast.c:20:1: warning: unused function 'get_unaligned16' [-Wunused-function] get_unaligned16(const unsigned short *p) ^ 1 warning generated. Fix it by moving the check from the preprocessor to C, so the compiler sees the use. Link: https://lkml.kernel.org/r/20210920084332.5752-1-pmenzel@molgen.mpg.de Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-24xtensa: increase size of gcc stack frame checkGuenter Roeck
xtensa frame size is larger than the frame size for almost all other architectures. This results in more than 50 "the frame size of <n> is larger than 1024 bytes" errors when trying to build xtensa:allmodconfig. Increase frame size for xtensa to 1536 bytes to avoid compile errors due to frame size limits. Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-24kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESSMarco Elver
In the main KASAN config option CC_HAS_WORKING_NOSANITIZE_ADDRESS is checked for instrumentation-based modes. However, if HAVE_ARCH_KASAN_HW_TAGS is true all modes may still be selected. To fix, also make the software modes depend on CC_HAS_WORKING_NOSANITIZE_ADDRESS. Link: https://lkml.kernel.org/r/20210910084240.1215803-1-elver@google.com Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS") Signed-off-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Aleksandr Nogikh <nogikh@google.com> Cc: Taras Madan <tarasmadan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
2021-09-23lib: devres: Add managed arch_io_reserve_memtype_wc()Thomas Zimmermann
Add devm_arch_io_reserve_memtype_wc() as managed wrapper around arch_io_reserve_memtype_wc(). Useful for several graphics drivers that set framebuffer memory to write combining. v2: * fix typo in commit description Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-3-tzimmermann@suse.de
2021-09-23lib: devres: Add managed arch_phys_wc_add()Thomas Zimmermann
Add devm_arch_phys_wc_add() as managed wrapper around arch_phys_wc_add(). Useful for several graphics drivers that set framebuffer memory to write combining. v2: * fix typo in commit description Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-2-tzimmermann@suse.de
2021-09-19pci_iounmap'2: Electric Boogaloo: try to make sense of it allLinus Torvalds
Nathan Chancellor reports that the recent change to pci_iounmap in commit 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") causes build errors on arm64. It took me about two hours to convince myself that I think I know what the logic of that mess of #ifdef's in the <asm-generic/io.h> header file really aim to do, and rewrite it to be easier to follow. Famous last words. Anyway, the code has now been lifted from that grotty header file into lib/pci_iomap.c, and has fairly extensive comments about what the logic is. It also avoids indirecting through another confusing (and badly named) helper function that has other preprocessor config conditionals. Let's see what odd architecture did something else strange in this area to break things. But my arm64 cross build is clean. Fixes: 9caea0007601 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-09-17 We've added 63 non-merge commits during the last 12 day(s) which contain a total of 65 files changed, 2653 insertions(+), 751 deletions(-). The main changes are: 1) Streamline internal BPF program sections handling and bpf_program__set_attach_target() in libbpf, from Andrii. 2) Add support for new btf kind BTF_KIND_TAG, from Yonghong. 3) Introduce bpf_get_branch_snapshot() to capture LBR, from Song. 4) IMUL optimization for x86-64 JIT, from Jie. 5) xsk selftest improvements, from Magnus. 6) Introduce legacy kprobe events support in libbpf, from Rafael. 7) Access hw timestamp through BPF's __sk_buff, from Vadim. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (63 commits) selftests/bpf: Fix a few compiler warnings libbpf: Constify all high-level program attach APIs libbpf: Schedule open_opts.attach_prog_fd deprecation since v0.7 selftests/bpf: Switch fexit_bpf2bpf selftest to set_attach_target() API libbpf: Allow skipping attach_func_name in bpf_program__set_attach_target() libbpf: Deprecated bpf_object_open_opts.relaxed_core_relocs selftests/bpf: Stop using relaxed_core_relocs which has no effect libbpf: Use pre-setup sec_def in libbpf_find_attach_btf_id() bpf: Update bpf_get_smp_processor_id() documentation libbpf: Add sphinx code documentation comments selftests/bpf: Skip btf_tag test if btf_tag attribute not supported docs/bpf: Add documentation for BTF_KIND_TAG selftests/bpf: Add a test with a bpf program with btf_tag attributes selftests/bpf: Test BTF_KIND_TAG for deduplication selftests/bpf: Add BTF_KIND_TAG unit tests selftests/bpf: Change NAME_NTH/IS_NAME_NTH for BTF_KIND_TAG format selftests/bpf: Test libbpf API function btf__add_tag() bpftool: Add support for BTF_KIND_TAG libbpf: Add support for BTF_KIND_TAG libbpf: Rename btf_{hash,equal}_int to btf_{hash,equal}_int_tag ... ==================== Link: https://lore.kernel.org/r/20210917173738.3397064-1-ast@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-17Merge tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring iov_iter retry fixes from Jens Axboe: "This adds a helper to save/restore iov_iter state, and modifies io_uring to use it. After that is done, we can now kill the iter->truncated addition that we added for this release. The io_uring change is being overly cautious with the save/restore/advance, but better safe than sorry and we can always improve that and reduce the overhead if it proves to be of concern. The only case to be worried about in this regard is huge IO, where iteration can take a while to iterate segments. I spent some time writing test cases, and expanded the coverage quite a bit from the last posting of this. liburing carries this regression test case now: https://git.kernel.dk/cgit/liburing/tree/test/file-verify.c which exercises all of this. It now also supports provided buffers, and explicitly tests for end-of-file/device truncation as well. On top of that, Pavel sanitized the IOPOLL retry path to follow the exact same pattern as normal IO" * tag 'iov_iter.3-5.15-2021-09-17' of git://git.kernel.dk/linux-block: io_uring: move iopoll reissue into regular IO path Revert "iov_iter: track truncated size" io_uring: use iov_iter state save/restore helpers iov_iter: add helper to save iov_iter state
2021-09-17kernel/locking: Add context to ww_mutex_trylock()Maarten Lankhorst
i915 will soon gain an eviction path that trylock a whole lot of locks for eviction, getting dmesg failures like below: BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by i915_selftest/5776: #0: ffff888101a79240 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x88/0x160 #1: ffffc900009778c0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.63+0x39/0x1b0 [i915] #2: ffff88800cf74de8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.63+0x5f/0x1b0 [i915] #3: ffff88810c7f9e38 (&vm->mutex/1){+.+.}-{3:3}, at: i915_vma_pin_ww+0x1c4/0x9d0 [i915] #4: ffff88810bad5768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] #5: ffff88810bad60e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] ... #46: ffff88811964d768 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] #47: ffff88811964e0e8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_gem_evict_something+0x110/0x860 [i915] INFO: lockdep is turned off. Fixing eviction to nest into ww_class_acquire is a high priority, but it requires a rework of the entire driver, which can only be done one step at a time. As an intermediate solution, add an acquire context to ww_mutex_trylock, which allows us to do proper nesting annotations on the trylocks, making the above lockdep splat disappear. This is also useful in regulator_lock_nested, which may avoid dropping regulator_nesting_mutex in the uncontended path, so use it there. TTM may be another user for this, where we could lock a buffer in a fastpath with list locks held, without dropping all locks we hold. [peterz: rework actual ww_mutex_trylock() implementations] Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/YUBGPdDDjKlxAuXJ@hirez.programming.kicks-ass.net
2021-09-17net: update NXP copyright textVladimir Oltean
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17objtool: Support pv_opsindirect calls for noinstrPeter Zijlstra
Normally objtool will now follow indirect calls; there is no need. However, this becomes a problem with noinstr validation; if there's an indirect call from noinstr code, we very much need to know it is to another noinstr function. Luckily there aren't many indirect calls in entry code with the obvious exception of paravirt. As such, noinstr validation didn't work with paravirt kernels. In order to track pv_ops[] call targets, objtool reads the static pv_ops[] tables as well as direct assignments to the pv_ops[] array, provided the compiler makes them a single instruction like: bf87: 48 c7 05 00 00 00 00 00 00 00 00 movq $0x0,0x0(%rip) bf92 <xen_init_spinlocks+0x5f> bf8a: R_X86_64_PC32 pv_ops+0x268 There are, as of yet, no warnings for when this goes wrong :/ Using the functions found with the above means, all pv_ops[] calls are now subject to noinstr validation. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20210624095149.118815755@infradead.org
2021-09-17crypto: sm4 - Do not change section of ck and sboxNathan Chancellor
When building with clang and GNU as, there is a warning about ignored changed section attributes: /tmp/sm4-c916c8.s: Assembler messages: /tmp/sm4-c916c8.s:677: Warning: ignoring changed section attributes for .data..cacheline_aligned "static const" places the data in .rodata but __cacheline_aligned has the section attribute to place it in .data..cacheline_aligned, in addition to the aligned attribute. To keep the alignment but avoid attempting to change sections, use the ____cacheline_aligned attribute, which is just the aligned attribute. Fixes: 2b31277af577 ("crypto: sm4 - create SM4 library based on sm4 generic code") Link: https://github.com/ClangBuiltLinux/linux/issues/1441 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-09-14memblock: introduce saner 'memblock_free_ptr()' interfaceLinus Torvalds
The boot-time allocation interface for memblock is a mess, with 'memblock_alloc()' returning a virtual pointer, but then you are supposed to free it with 'memblock_free()' that takes a _physical_ address. Not only is that all kinds of strange and illogical, but it actually causes bugs, when people then use it like a normal allocation function, and it fails spectacularly on a NULL pointer: https://lore.kernel.org/all/20210912140820.GD25450@xsang-OptiPlex-9020/ or just random memory corruption if the debug checks don't catch it: https://lore.kernel.org/all/61ab2d0c-3313-aaab-514c-e15b7aa054a0@suse.cz/ I really don't want to apply patches that treat the symptoms, when the fundamental cause is this horribly confusing interface. I started out looking at just automating a sane replacement sequence, but because of this mix or virtual and physical addresses, and because people have used the "__pa()" macro that can take either a regular kernel pointer, or just the raw "unsigned long" address, it's all quite messy. So this just introduces a new saner interface for freeing a virtual address that was allocated using 'memblock_alloc()', and that was kept as a regular kernel pointer. And then it converts a couple of users that are obvious and easy to test, including the 'xbc_nodes' case in lib/bootconfig.c that caused problems. Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed") Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-14iov_iter: add helper to save iov_iter stateJens Axboe
In an ideal world, when someone is passed an iov_iter and returns X bytes, then X bytes would have been consumed/advanced from the iov_iter. But we have use cases that always consume the entire iterator, a few examples of that are iomap and bdev O_DIRECT. This means we cannot rely on the state of the iov_iter once we've called ->read_iter() or ->write_iter(). This would be easier if we didn't always have to deal with truncate of the iov_iter, as rewinding would be trivial without that. We recently added a commit to track the truncate state, but that grew the iov_iter by 8 bytes and wasn't the best solution. Implement a helper to save enough of the iov_iter state to sanely restore it after we've called the read/write iterator helpers. This currently only works for IOVEC/BVEC/KVEC as that's all we need, support for other iterator types are left as an exercise for the reader. Link: https://lore.kernel.org/linux-fsdevel/CAHk-=wiacKV4Gh-MYjteU0LwNBSGpWrK-Ov25HdqB1ewinrFPg@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-14kobject: unexport kobject_create() in kobject.hQu Wenruo
The function kobject_create() is only used by one caller, kobject_create_and_add(), no other driver uses it, nor is exported to other modules. However it's still exported in kobject.h, and can sometimes confuse users of kobject.h. Since all users should call kobject_create_and_add(), or if extra attributes are needed, should alloc the memory manually then call kobject_init_and_add(). Signed-off-by: Qu Wenruo <wqu@suse.com> Link: https://lore.kernel.org/r/20210831093044.110729-1-wqu@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-13Merge branch 'gcc-min-version-5.1' (make gcc-5.1 the minimum version)Linus Torvalds
Merge patch series from Nick Desaulniers to update the minimum gcc version to 5.1. This is some of the left-overs from the merge window that I didn't want to deal with yesterday, so it comes in after -rc1 but was sent before. Gcc-4.9 support has been an annoyance for some time, and with -Werror I had the choice of applying a fairly big patch from Kees Cook to remove a fair number of initializer warnings (still leaving some), or this patch series from Nick that just removes the source of the problem. The initializer cleanups might still be worth it regardless, but honestly, I preferred just tackling the problem with gcc-4.9 head-on. We've been more aggressiuve about no longer having to care about compilers that were released a long time ago, and I think it's been a good thing. I added a couple of patches on top to sort out a few left-overs now that we no longer support gcc-4.x. As noted by Arnd, as a result of this minimum compiler version upgrade we can probably change our use of '--std=gnu89' to '--std=gnu11', and finally start using local loop declarations etc. But this series does _not_ yet do that. Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/ Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/ Link: https://github.com/ClangBuiltLinux/linux/issues/1438 * emailed patches from Nick Desaulniers <ndesaulniers@google.com>: Drop some straggling mentions of gcc-4.9 as being stale compiler_attributes.h: drop __has_attribute() support for gcc4 vmlinux.lds.h: remove old check for GCC 4.9 compiler-gcc.h: drop checks for older GCC versions Makefile: drop GCC < 5 -fno-var-tracking-assignments workaround arm64: remove GCC version check for ARCH_SUPPORTS_INT128 powerpc: remove GCC version check for UPD_CONSTR riscv: remove Kconfig check for GCC version for ARCH_RV64I Kconfig.debug: drop GCC 5+ version check for DWARF5 mm/ksm: remove old GCC 4.9+ check compiler.h: drop fallback overflow checkers Documentation: raise minimum supported version of GCC to 5.1
2021-09-13Kconfig.debug: drop GCC 5+ version check for DWARF5Nick Desaulniers
Now that the minimum supported version of GCC is 5.1, we no longer need this Kconfig version check for CONFIG_DEBUG_INFO_DWARF5. Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-11Merge tag 'trace-v5.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Minor fixes to the processing of the bootconfig tree" * tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey() tracing/boot: Fix to check the histogram control param is a leaf node tracing/boot: Fix trace_boot_hist_add_array() to check array is value
2021-09-10selftests/bpf: Test new __sk_buff field hwtstampVadim Fedorenko
Analogous to the gso_segs selftests introduced in commit d9ff286a0f59 ("bpf: allow BPF programs access skb_shared_info->gso_segs field"). Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210909220409.8804-3-vfedorenko@novek.ru
2021-09-09bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()Masami Hiramatsu
Rename xbc_node_find_child() to xbc_node_find_subkey() for clarifying that function returns a key node (no value node). Since there are xbc_node_for_each_child() (loop on all child nodes) and xbc_node_for_each_subkey() (loop on only subkey nodes), this name distinction is necessary to avoid confusing users. Link: https://lkml.kernel.org/r/163119459826.161018.11200274779483115300.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit (git 2.34.1) at 2025-09-12 07:33:54 +0000