| Age | Commit message (Collapse) | Author |
|---|
|
Like global slab shrink, this commit also uses refcount+RCU method to make
memcg slab shrink lockless.
Use the following script to do slab shrink stress test:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use
the following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what
we expect.
Link: https://lkml.kernel.org/r/20230911094444.68966-44-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. The down_read_trylock() may become a perf hotspot with frequent
calls to shrink_slab(). Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
We used to implement the lockless slab shrink with SRCU [2], but then
kernel test robot reported -88.8% regression in
stress-ng.ramfs.ops_per_sec test case [3], so we reverted it [4].
This commit uses the refcount+RCU method [5] proposed by Dave Chinner
to re-implement the lockless global slab shrink. The memcg slab shrink is
handled in the subsequent patch.
For now, all shrinker instances are converted to dynamically allocated and
will be freed by call_rcu(). So we can use rcu_read_{lock,unlock}() to
ensure that the shrinker instance is valid.
And the shrinker instance will not be run again after unregistration. So
the structure that records the pointer of shrinker instance can be safely
freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to
be blocked in unregister_shrinker().
The following are the test results:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[3]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[4]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[5]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
Link: https://lkml.kernel.org/r/20230911094444.68966-43-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
shrinker_memcg_{alloc|remove}()
With the new shrinker APIs, there is no action such as prealloc, so rename
{prealloc|unregister}_memcg_shrinker() to shrinker_memcg_{alloc|remove}(),
which corresponds to the idr_{alloc|remove}() inside the function.
Link: https://lkml.kernel.org/r/20230911094444.68966-42-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, we maintain two linear arrays per node per memcg, which are
shrinker_info::map and shrinker_info::nr_deferred. And we need to resize
them when the shrinker_nr_max is exceeded, that is, allocate a new array,
and then copy the old array to the new array, and finally free the old
array by RCU.
For shrinker_info::map, we do set_bit() under the RCU lock, so we may set
the value into the old map which is about to be freed. This may cause the
value set to be lost. The current solution is not to copy the old map when
resizing, but to set all the corresponding bits in the new map to 1. This
solves the data loss problem, but bring the overhead of more pointless
loops while doing memcg slab shrink.
For shrinker_info::nr_deferred, we will only modify it under the read lock
of shrinker_rwsem, so it will not run concurrently with the resizing. But
after we make memcg slab shrink lockless, there will be the same data loss
problem as shrinker_info::map, and we can't work around it like the map.
For such resizable arrays, the most straightforward idea is to change it
to xarray, like we did for list_lru [1]. We need to do xa_store() in the
list_lru_add()-->set_shrinker_bit(), but this will cause memory
allocation, and the list_lru_add() doesn't accept failure. A possible
solution is to pre-allocate, but the location of pre-allocation is not
well determined (such as deferred_split_shrinker case).
Therefore, this commit chooses to introduce the following secondary array
for shrinker_info::{map, nr_deferred}:
+---------------+--------+--------+-----+
| shrinker_info | unit 0 | unit 1 | ... | (secondary array)
+---------------+--------+--------+-----+
|
v
+---------------+-----+
| nr_deferred[] | map | (leaf array)
+---------------+-----+
(shrinker_info_unit)
The leaf array is never freed unless the memcg is destroyed. The secondary
array will be resized every time the shrinker id exceeds shrinker_nr_max.
So the shrinker_info_unit can be indexed from both the old and the new
shrinker_info->unit[x]. Then even if we get the old secondary array under
the RCU lock, the found map and nr_deferred are also true, so the updated
nr_deferred and map will not be lost.
[1]. https://lore.kernel.org/all/20220228122126.37293-13-songmuchun@bytedance.com/
[zhengqi.arch@bytedance.com: unlock the &shrinker_rwsem before the call to free_shrinker_info()]
Link: https://lkml.kernel.org/r/20230928141517.12164-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-41-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now no users are using the old APIs, just remove them.
Link: https://lkml.kernel.org/r/20230911094444.68966-40-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for implementing lockless slab shrink, use new APIs to
dynamically allocate the mm-zspool shrinker, so that it can be freed
asynchronously via RCU. Then it doesn't need to wait for RCU read-side
critical section when releasing the struct zs_pool.
Link: https://lkml.kernel.org/r/20230911094444.68966-38-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use new APIs to dynamically allocate the mm-shadow shrinker.
Link: https://lkml.kernel.org/r/20230911094444.68966-20-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use new APIs to dynamically allocate the thp-zero and thp-deferred_split
shrinkers.
Link: https://lkml.kernel.org/r/20230911094444.68966-18-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sean Paul <sean@poorly.run>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "use refcount+RCU method to implement lockless slab shrink",
v6.
1. Background
=============
We used to implement the lockless slab shrink with SRCU [1], but then kernel
test robot reported -88.8% regression in stress-ng.ramfs.ops_per_sec test
case [2], so we reverted it [3].
This patch series aims to re-implement the lockless slab shrink using the
refcount+RCU method proposed by Dave Chinner [4].
[1]. https://lore.kernel.org/lkml/20230313112819.38938-1-zhengqi.arch@bytedance.com/
[2]. https://lore.kernel.org/lkml/202305230837.db2c233f-yujie.liu@intel.com/
[3]. https://lore.kernel.org/all/20230609081518.3039120-1-qi.zheng@linux.dev/
[4]. https://lore.kernel.org/lkml/ZIJhou1d55d4H1s0@dread.disaster.area/
2. Implementation
=================
Currently, the shrinker instances can be divided into the following three types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such as
mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b, the
memory of shrinker instance will be freed after synchronize_rcu() when the
module is unloaded. For case c, the memory of shrinker instance will be freed
along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to dynamically
allocate those shrinker instances in case c, then the memory can be dynamically
freed alone by calling kfree_rcu().
This patchset adds the following new APIs for dynamically allocating shrinker,
and add a private_data field to struct shrinker to record and get the original
embedded structure.
1. shrinker_alloc()
2. shrinker_register()
3. shrinker_free()
In order to simplify shrinker-related APIs and make shrinker more independent of
other kernel mechanisms, this patchset uses the above APIs to convert all
shrinkers (including case a and b) to dynamically allocated, and then remove all
existing APIs. This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing out of tree
code and third party modules using the old API and will no longer work with a
kernel using lockless slab shrinkers. They need to break (both at the source and
binary levels) to stop bad things from happening due to using uncoverted
shrinkers in the new setup.
```
Then we free the shrinker by calling call_rcu(), and use rcu_read_{lock,unlock}()
to ensure that the shrinker instance is valid. And the shrinker::refcount
mechanism ensures that the shrinker instance will not be run again after
unregistration. So the structure that records the pointer of shrinker instance
can be safely freed without waiting for the RCU read-side critical section.
In this way, while we implement the lockless slab shrink, we don't need to be
blocked in unregister_shrinker() to wait RCU read-side critical section.
PATCH 1: introduce new APIs
PATCH 2~38: convert all shrinnkers to use new APIs
PATCH 39: remove old APIs
PATCH 40~41: some cleanups and preparations
PATCH 42-43: implement the lockless slab shrink
PATCH 44~45: convert shrinker_rwsem to mutex
3. Testing
==========
3.1 slab shrink stress test
---------------------------
We can reproduce the down_read_trylock() hotspot through the following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use the
following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
33.15% [kernel] [k] down_read_trylock
25.38% [kernel] [k] shrink_slab
21.75% [kernel] [k] up_read
4.45% [kernel] [k] _find_next_bit
2.27% [kernel] [k] do_shrink_slab
1.80% [kernel] [k] intel_idle_irq
1.79% [kernel] [k] shrink_lruvec
0.67% [kernel] [k] xas_descend
0.41% [kernel] [k] mem_cgroup_iter
0.40% [kernel] [k] shrink_node
0.38% [kernel] [k] list_lru_count_one
2) After applying this patchset:
64.56% [kernel] [k] shrink_slab
12.18% [kernel] [k] do_shrink_slab
3.30% [kernel] [k] __rcu_read_unlock
2.61% [kernel] [k] shrink_lruvec
2.49% [kernel] [k] __rcu_read_lock
1.93% [kernel] [k] intel_idle_irq
0.89% [kernel] [k] shrink_node
0.81% [kernel] [k] mem_cgroup_iter
0.77% [kernel] [k] mem_cgroup_calculate_protection
0.66% [kernel] [k] list_lru_count_one
We can see that the first perf hotspot becomes shrink_slab, which is what we
expect.
3.2 registration and unregistration stress test
-----------------------------------------------
Run the command below to test:
stress-ng --timeout 60 --times --verify --metrics-brief --ramfs 9 &
1) Before applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 473062 60.00 8.00 279.13 7884.12 1647.59
for a 60.01s run time:
1440.34s available CPU time
7.99s user time ( 0.55%)
279.13s system time ( 19.38%)
287.12s total time ( 19.93%)
load average: 7.12 2.99 1.15
successful run completed in 60.01s (1 min, 0.01 secs)
2) After applying this patchset:
setting to a 60 second run per stressor
dispatching hogs: 9 ramfs
stressor bogo ops real time usr time sys time bogo ops/s bogo ops/s
(secs) (secs) (secs) (real time) (usr+sys time)
ramfs 477165 60.00 8.13 281.34 7952.55 1648.40
for a 60.01s run time:
1440.33s available CPU time
8.12s user time ( 0.56%)
281.34s system time ( 19.53%)
289.46s total time ( 20.10%)
load average: 6.98 3.03 1.19
successful run completed in 60.01s (1 min, 0.01 secs)
We can see that the ops/s has hardly changed.
This patch (of 45):
Currently, the shrinker instances can be divided into the following three
types:
a) global shrinker instance statically defined in the kernel, such as
workingset_shadow_shrinker.
b) global shrinker instance statically defined in the kernel modules, such
as mmu_shrinker in x86.
c) shrinker instance embedded in other structures.
For case a, the memory of shrinker instance is never freed. For case b,
the memory of shrinker instance will be freed after synchronize_rcu() when
the module is unloaded. For case c, the memory of shrinker instance will
be freed along with the structure it is embedded in.
In preparation for implementing lockless slab shrink, we need to
dynamically allocate those shrinker instances in case c, then the memory
can be dynamically freed alone by calling kfree_rcu().
So this commit adds the following new APIs for dynamically allocating
shrinker, and add a private_data field to struct shrinker to record and
get the original embedded structure.
1. shrinker_alloc()
Used to allocate shrinker instance itself and related memory, it will
return a pointer to the shrinker instance on success and NULL on failure.
2. shrinker_register()
Used to register the shrinker instance, which is same as the current
register_shrinker_prepared().
3. shrinker_free()
Used to unregister (if needed) and free the shrinker instance.
In order to simplify shrinker-related APIs and make shrinker more
independent of other kernel mechanisms, subsequent submissions will use
the above API to convert all shrinkers (including case a and b) to
dynamically allocated, and then remove all existing APIs.
This will also have another advantage mentioned by Dave Chinner:
```
The other advantage of this is that it will break all the existing
out of tree code and third party modules using the old API and will
no longer work with a kernel using lockless slab shrinkers. They
need to break (both at the source and binary levels) to stop bad
things from happening due to using unconverted shrinkers in the new
setup.
```
[zhengqi.arch@bytedance.com: mm: shrinker: some cleanup]
Link: https://lkml.kernel.org/r/20230919024607.65463-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911094444.68966-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, synchronize_shrinkers() is only used by TTM pool. It only
requires that no shrinkers run in parallel.
After we use RCU+refcount method to implement the lockless slab shrink, we
can not use shrinker_rwsem or synchronize_rcu() to guarantee that all
shrinker invocations have seen an update before freeing memory.
So we introduce a new pool_shrink_rwsem to implement a private
ttm_pool_synchronize_shrinkers(), so as to achieve the same purpose.
Link: https://lkml.kernel.org/r/20230911092517.64141-5-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
debugfs_remove_recursive() will wait for debugfs_file_put() to return, so
the shrinker will not be freed when doing debugfs operations (such as
shrinker_debugfs_count_show() and shrinker_debugfs_scan_write()), so there
is no need to hold shrinker_rwsem during debugfs operations.
Link: https://lkml.kernel.org/r/20230911092517.64141-4-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mm/vmscan.c file is too large, so separate the shrinker-related code
from it into a separate file. No functional changes.
Link: https://lkml.kernel.org/r/20230911092517.64141-3-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "cleanups for lockless slab shrink", v4.
This series is some cleanups for lockless slab shrink.
This patch (of 4):
The following functions are only used inside the mm subsystem, so it's
better to move their declarations to the mm/internal.h file.
1. shrinker_debugfs_add()
2. shrinker_debugfs_detach()
3. shrinker_debugfs_remove()
Link: https://lkml.kernel.org/r/20230911092517.64141-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230911092517.64141-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chuck Lever <cel@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Coly Li <colyli@suse.de>
Cc: Dai Ngo <Dai.Ngo@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Gao Xiang <hsiangkao@linux.alibaba.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jeffle Xu <jefflexu@linux.alibaba.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Olga Kornievskaia <kolga@netapp.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Song Liu <song@kernel.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a regression test for the special case where memcpy() previously
failed to correctly set the origins: if upon memcpy() four aligned
initialized bytes with a zero origin value ended up split between two
aligned four-byte chunks, one of those chunks could've received the zero
origin value even despite it contained uninitialized bytes from other
writes.
Link: https://lkml.kernel.org/r/20230911145702.2663753-4-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce report_reset() that allows checking for more than one KMSAN
report per testcase.
Fold test_memcpy_aligned_to_unaligned2() into
test_memcpy_aligned_to_unaligned(), so that they share the setup phase and
check the behavior of a single memcpy() call.
Link: https://lkml.kernel.org/r/20230911145702.2663753-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 18 learned to optimize away memcpy() calls of small uninitialized
scalar values. To ensure that memcpy tests in kmsan_test.c still perform
calls to memcpy() (which KMSAN replaces with __msan_memcpy()), declare a
separate memcpy_noinline() function with volatile parameters, which won't
be optimized.
Also retire DO_NOT_OPTIMIZE(), as memcpy_noinline() is apparently enough.
Link: https://lkml.kernel.org/r/20230911145702.2663753-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmsan_internal_memmove_metadata() is the function that implements copying
metadata every time memcpy()/memmove() is called. Because shadow memory
stores 1 byte per each byte of kernel memory, copying the shadow is
trivial and can be done by a single memmove() call.
Origins, on the other hand, are stored as 4-byte values corresponding to
every aligned 4 bytes of kernel memory. Therefore, if either the source
or the destination of kmsan_internal_memmove_metadata() is unaligned, the
number of origin slots corresponding to the source or destination may
differ:
1) memcpy(0xffff888080a00000, 0xffff888080900000, 4)
copies 1 origin slot into 1 origin slot:
src (0xffff888080900000): xxxx
src origins: o111
dst (0xffff888080a00000): xxxx
dst origins: o111
2) memcpy(0xffff888080a00001, 0xffff888080900000, 4)
copies 1 origin slot into 2 origin slots:
src (0xffff888080900000): xxxx
src origins: o111
dst (0xffff888080a00000): .xxx x...
dst origins: o111 o111
3) memcpy(0xffff888080a00000, 0xffff888080900001, 4)
copies 2 origin slots into 1 origin slot:
src (0xffff888080900000): .xxx x...
src origins: o111 o222
dst (0xffff888080a00000): xxxx
dst origins: o111
(or o222)
Previously, kmsan_internal_memmove_metadata() tried to solve this problem
by copying min(src_slots, dst_slots) as is and cloning the missing slot on
one of the ends, if needed.
This was error-prone even in the simple cases where 4 bytes were copied,
and did not account for situations where the total number of nonzero
origin slots could have increased by more than one after copying:
memcpy(0xffff888080a00000, 0xffff888080900002, 8)
src (0xffff888080900002): ..xx .... xx..
src origins: o111 0000 o222
dst (0xffff888080a00000): xx.. ..xx
o111 0000
(or 0000 o222)
The new implementation simply copies the shadow byte by byte, and updates
the corresponding origin slot, if the shadow byte is nonzero. This
approach can handle complex cases with mixed initialized and uninitialized
bytes. Similarly to KMSAN inline instrumentation, latter writes to bytes
sharing the same origin slots take precedence.
Link: https://lkml.kernel.org/r/20230911145702.2663753-1-glider@google.com
Fixes: f80be4571b19 ("kmsan: add KMSAN runtime core")
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 434ed3350f57 ("memfd: improve userspace warnings for missing
exec-related flags") attempted to make these warnings more useful (so
they would work as an incentive to get users to switch to specifying
these flags -- as intended by the original MFD_NOEXEC_SEAL patchset).
Unfortunately, it turns out that even INFO-level logging is too extreme
to enable by default and alternative solutions to the spam issue (such
as doing more extreme rate-limiting per-task) are either too ugly or
overkill for something as simple as emitting a log as a developer aid.
Given that the flags are new and there is no harm to not specifying them
(after all, we maintain backwards compatibility) we can just drop the
warnings for now until some time in the future when most programs have
migrated and distributions start using vm.memfd_noexec=1 (where failing
to pass the flag would result in unexpected errors for programs that use
executable memfds).
Link: https://lkml.kernel.org/r/20230912-memfd-reduce-spam-v2-1-7d92a4964b6a@cyphar.com
Fixes: 434ed3350f57 ("memfd: improve userspace warnings for missing exec-related flags")
Fixes: 2562d67b1bdf ("revert "memfd: improve userspace warnings for missing exec-related flags".")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reported-by: Damian Tometzki <dtometzki@fedoraproject.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
"(CONFIG_SHMEM)&&(!(CONFIG_SHMEM))"
The value of “.fs_flags” in line 4608 is a dead code which will never
be implemented，because its conditions of line 47 "#ifdef CONFIG_SHMEM"
and line 4607 are mutually exclusive. It is recommended to delete
redundant code.
Link: https://lkml.kernel.org/r/20230906045012.14999-1-sunying@nj.iscas.ac.cn
Signed-off-by: Ying Sun <sunying@nj.iscas.ac.cn>
Suggested-by: Yanjie Ren <renyanjie01@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If panic is enable,the err information will not be printed before bugon,
So swap it. Print the return value of PTR_ERR(pgdat->kswapd) also.
Link: https://lkml.kernel.org/r/20230906083700.181-1-angus.chen@jaguarmicro.com
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a similar pr_info in free_area_init_node(), so remove the
redundant pr_info.
before:
[ 0.006314] Initializing node 0 as memoryless
[ 0.006445] Initmem setup node 0 as memoryless
[ 0.006450] Initmem setup node 1 [mem 0x0000000000001000-0x000000003fffffff]
[ 0.006453] Initmem setup node 2 [mem 0x0000000040000000-0x000000007ffd7fff]
[ 0.006454] Initializing node 3 as memoryless
[ 0.006584] Initmem setup node 3 as memoryless
[ 0.006585] Initmem setup node 4 [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.006586] Initmem setup node 5 [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.006587] Initmem setup node 6 [mem 0x0000000200000000-0x000000023fffffff]
after:
[ 0.004147] Initmem setup node 0 as memoryless
[ 0.004148] Initmem setup node 1 [mem 0x0000000000001000-0x000000003fffffff]
[ 0.004150] Initmem setup node 2 [mem 0x0000000040000000-0x000000007ffd7fff]
[ 0.004154] Initmem setup node 3 as memoryless
[ 0.004155] Initmem setup node 4 [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.004156] Initmem setup node 5 [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.004157] Initmem setup node 6 [mem 0x0000000200000000-0x000000023fffffff]
Link: https://lkml.kernel.org/r/20230906091113.4029983-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In vmemmap_remap_free(), a new head vmemmap page is allocated to avoid
breaking a contiguous block of struct page memory, however, the allocation
can always fail when the given node is movable node. Remove the
__GFP_THISNODE to help avoid fragmentation.
Link: https://lkml.kernel.org/r/20230906093157.9737-1-yuancan@huawei.com
Signed-off-by: Yuan Can <yuancan@huawei.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
expand_upwards() and expand_downwards() will return -EFAULT if VM_GROWSUP
or VM_GROWSDOWN is not correctly set in vma->vm_flags, however in
!CONFIG_STACK_GROWSUP case, expand_stack_locked() returns -EINVAL first if
!(vma->vm_flags & VM_GROWSDOWN) before calling expand_downwards(), to keep
the consistency with CONFIG_STACK_GROWSUP case, remove this check.
The usages of this function are as below:
A:fs/exec.c
ret = expand_stack_locked(vma, stack_base);
if (ret)
ret = -EFAULT;
or
B:mm/memory.c mm/mmap.c
if (expand_stack_locked(vma, addr))
return NULL;
which means the return value will not propagate to other places, so I
believe there is no user-visible effects of this change, and it's
unnecessary to backport to earlier versions.
Link: https://lkml.kernel.org/r/20230906103312.645712-1-xiujianfeng@huaweicloud.com
Fixes: f440fa1ac955 ("mm: make find_extend_vma() fail if write lock not held")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
tracepoint
damon_aggregateed tracepoint is receiving 'struct target *', but doesn't
use it. Remove it from the prototype.
Link: https://lkml.kernel.org/r/20230907022929.91361-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment on damon_set_attrs() says it should not be called while the
kdamond is running, but now some DAMON modules like sysfs interface and
DAMON_RECLAIM call it from after_aggregation() and/or
after_wmarks_check() callbacks for online tuning. Update the comment.
Link: https://lkml.kernel.org/r/20230907022929.91361-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Out of zswap's 3 allocators, zsmalloc is the clear superior in terms of
memory utilization, both in theory and as observed in practice, with its
high storage density and low internal fragmentation. zsmalloc is also
more actively developed and maintained, since it is the allocator of
choice for zswap for many users, as well as the only allocator for zram.
A historical objection to the selection of zsmalloc as the default
allocator for zswap is its lack of writeback capability. However, this
has changed, with the zsmalloc writeback patchset, and the subsequent
zswap LRU refactor. With this, there is not a lot of good reasons to keep
zbud, an otherwise inferior allocator, as the default instead of zswap.
This patch changes the default allocator to zsmalloc. The only exception
is on settings without MMU, in which case zbud will remain as the default.
Link: https://lkml.kernel.org/r/20230908235115.2943486-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For the stack move happening in shift_arg_pages(), the move is happening
within the same VMA which spans the old and new ranges.
In case the aligned address happens to fall within that VMA, allow such
moves and don't abort the mremap alignment optimization.
In the regular non-stack mremap case, we cannot allow any such moves as
will end up destroying some part of the mapping (either the source of the
move, or part of the existing mapping). So just avoid it for stack moves.
Link: https://lkml.kernel.org/r/20230903151328.2981432-3-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Optimize mremap during mutual alignment within PMD", v6.
This patchset optimizes the start addresses in move_page_tables() and
tests the changes. It addresses a warning [1] that occurs due to a
downward, overlapping move on a mutually-aligned offset within a PMD
during exec. By initiating the copy process at the PMD level when such
alignment is present, we can prevent this warning and speed up the copying
process at the same time. Linus Torvalds suggested this idea. Check the
individual patches for more details. [1]
https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/
This patch (of 7):
Recently, we see reports [1] of a warning that triggers due to
move_page_tables() doing a downward and overlapping move on a
mutually-aligned offset within a PMD. By mutual alignment, I mean the
source and destination addresses of the mremap are at the same offset
within a PMD.
This mutual alignment along with the fact that the move is downward is
sufficient to cause a warning related to having an allocated PMD that does
not have PTEs in it.
This warning will only trigger when there is mutual alignment in the move
operation. A solution, as suggested by Linus Torvalds [2], is to initiate
the copy process at the PMD level whenever such alignment is present.
Implementing this approach will not only prevent the warning from being
triggered, but it will also optimize the operation as this method should
enhance the speed of the copy process whenever there's a possibility to
start copying at the PMD level.
Some more points:
a. The optimization can be done only when both the source and
destination of the mremap do not have anything mapped below it up to a
PMD boundary. I add support to detect that.
b. #1 is not a problem for the call to move_page_tables() from exec.c as
nothing is expected to be mapped below the source. However, for
non-overlapping mutually aligned moves as triggered by mremap(2), I
added support for checking such cases.
c. I currently only optimize for PMD moves, in the future I/we can build
on this work and do PUD moves as well if there is a need for this. But I
want to take it one step at a time.
d. We need to be careful about mremap of ranges within the VMA itself.
For this purpose, I added checks to determine if the address after
alignment falls within its VMA itself.
[1] https://lore.kernel.org/all/ZB2GTBD%2FLWTrkOiO@dhcp22.suse.cz/
[2] https://lore.kernel.org/all/CAHk-=whd7msp8reJPfeGNyt0LiySMT0egExx3TVZSX3Ok6X=9g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230903151328.2981432-1-joel@joelfernandes.org
Link: https://lkml.kernel.org/r/20230903151328.2981432-2-joel@joelfernandes.org
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The decreasing of hugetlb pages number failed with the following message
given:
sh: page allocation failure: order:0, mode:0x204cc0(GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_THISNODE)
CPU: 1 PID: 112 Comm: sh Not tainted 6.5.0-rc7-... #45
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.6+0x84/0xe4
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
warn_alloc+0x100/0x1bc
__alloc_pages_slowpath.constprop.107+0xa40/0xad8
__alloc_pages+0x244/0x2d0
hugetlb_vmemmap_restore+0x104/0x1e4
__update_and_free_hugetlb_folio+0x44/0x1f4
update_and_free_hugetlb_folio+0x20/0x68
update_and_free_pages_bulk+0x4c/0xac
set_max_huge_pages+0x198/0x334
nr_hugepages_store_common+0x118/0x178
nr_hugepages_store+0x18/0x24
kobj_attr_store+0x18/0x2c
sysfs_kf_write+0x40/0x54
kernfs_fop_write_iter+0x164/0x1dc
vfs_write+0x3a8/0x460
ksys_write+0x6c/0x100
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.1+0x6c/0xe4
do_el0_svc+0x38/0x94
el0_svc+0x28/0x74
el0t_64_sync_handler+0xa0/0xc4
el0t_64_sync+0x174/0x178
Mem-Info:
...
The reason is that the hugetlb pages being released are allocated from
movable nodes, and with hugetlb_optimize_vmemmap enabled, vmemmap pages
need to be allocated from the same node during the hugetlb pages
releasing. With GFP_KERNEL and __GFP_THISNODE set, allocating from movable
node is always failed. Fix this problem by removing __GFP_THISNODE.
Link: https://lkml.kernel.org/r/20230905124503.24899-1-yuancan@huawei.com
Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use this_cpu_try_cmpxchg instead of this_cpu_cmpxchg (*ptr, old, new) ==
old in mod_zone_state and mod_node_state. x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg (and
related move instruction in front of cmpxchg).
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg
fails. There is no need to re-read the value in the loop.
No functional change intended.
Link: https://lkml.kernel.org/r/20230904150917.8318-1-ubizjak@gmail.com
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The one caller of DAX lock/unlock page already calls compound_head(), so
use page_folio() instead, then use a folio throughout the DAX code to
remove uses of page->mapping and page->index.
[jane.chu@oracle.com: add comment to mf_generic_kill_procss(), simplify mf_generic_kill_procs:folio initialization]
Link: https://lkml.kernel.org/r/20230908222336.186313-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20230822231314.349200-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The feature got retired in f1a7941243c1 ("mm: convert mm's rss stats into
percpu_counter"), but the patch failed to fully clean it up.
Link: https://lkml.kernel.org/r/20230823170556.2281747-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In skip_cma(), we can use folio_migratetype() to replace
get_pageblock_migratetype().
Link: https://lkml.kernel.org/r/20230825075735.52436-1-user@VERNHAO-MC1
Signed-off-by: Vern Hao <vernhao@tencent.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
si_mem_available() needlessly places LRU statistics into an array before
retrieving only two of them, simply access those directly.
In addition, refactor the code so that the blocks of code which calculate
the page cache and reclaimable components each resemble one another to
clearly indicate we cap both against wmark_low in the same fashion.
Link: https://lkml.kernel.org/r/20230827110848.43510-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In set_nr_huge_pages(), local variable "count" is used to record
persistent_huge_pages(), but when it cames to nodes huge page allocation,
the semantics changes to nr_huge_pages. When there exists surplus huge
pages and using the interface under
/sys/devices/system/node/node*/hugepages to change huge page pool size,
this difference can result in the allocation of an unexpected number of
huge pages.
Steps to reproduce the bug:
Starting with:
Node 0 Node 1 Total
HugePages_Total 0.00 0.00 0.00
HugePages_Free 0.00 0.00 0.00
HugePages_Surp 0.00 0.00 0.00
create 100 huge pages in Node 0 and consume it, then set Node 0 's
nr_hugepages to 0.
yields:
Node 0 Node 1 Total
HugePages_Total 200.00 0.00 200.00
HugePages_Free 0.00 0.00 0.00
HugePages_Surp 200.00 0.00 200.00
write 100 to Node 1's nr_hugepages
echo 100 > /sys/devices/system/node/node1/\
hugepages/hugepages-2048kB/nr_hugepages
gets:
Node 0 Node 1 Total
HugePages_Total 200.00 400.00 600.00
HugePages_Free 0.00 400.00 400.00
HugePages_Surp 200.00 0.00 200.00
Kernel is expected to create only 100 huge pages and it gives 200.
Link: https://lkml.kernel.org/r/20230829033343.467779-1-xueshi.hu@smartx.com
Fixes: 9a30523066cd ("hugetlb: add per node hstate attributes")
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, vmemmap optimization of hugetlb pages is performed before the
hugetlb flag (previously hugetlb destructor) is set identifying it as a
hugetlb folio. This means there is a window of time where an ordinary
folio does not have all associated vmemmap present. The core mm only
expects vmemmap to be potentially optimized for hugetlb and device dax.
This can cause problems in code such as memory error handling that may
want to write to tail struct pages.
There is only one call to perform hugetlb vmemmap optimization today. To
fix this issue, simply set the hugetlb flag before that call.
There was a similar issue in the free hugetlb path that was previously
addressed. The two routines that optimize or restore hugetlb vmemmap
should only be passed hugetlb folios/pages. To catch any callers not
following this rule, add VM_WARN_ON calls to the routines. In the hugetlb
free code paths, some calls could be made to restore vmemmap after
clearing the hugetlb flag. This was 'safe' as in these cases vmemmap was
already present and the call was a NOOP. However, for consistency these
calls where eliminated so that we can add the VM_WARN_ON checks.
Link: https://lkml.kernel.org/r/20230829213734.69673-1-mike.kravetz@oracle.com
Fixes: f41f2ed43ca5 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix insert_vm_struct() so that only accounted memory is unaccounted if
vma_link() fails.
Link: https://lkml.kernel.org/r/20230830004324.16101-1-anthony.yznaga@oracle.com
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix mremap so that only accounted memory is unaccounted if the mapping is
expandable but vma_merge() fails.
Link: https://lkml.kernel.org/r/20230830004549.16131-1-anthony.yznaga@oracle.com
Fixes: fdbef6149135 ("mm/mremap: don't account pages in vma_to_resize()")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Acked-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
target order
We always do zone_watermark_ok check and compaction_suitable check
together to test if compaction for target order should be ran. Factor
these code out to remove repeat code.
Link: https://lkml.kernel.org/r/20230901155141.249860-7-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We do proactive compaction with order == -1 via
1. /proc/sys/vm/compact_memory
2. /sys/devices/system/node/nodex/compact
3. /proc/sys/vm/compaction_proactiveness
Add missed situation in which order == -1.
Link: https://lkml.kernel.org/r/20230901155141.249860-6-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
reset_isolation_suitable
We have compact_blockskip_flush check in __reset_isolation_suitable, just
remove repeat check before __reset_isolation_suitable in
compact_blockskip_flush.
Link: https://lkml.kernel.org/r/20230901155141.249860-5-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In strict mode, we should return 0 if there is any hole in pageblock. If
we successfully isolated pages at beginning at pageblock and then have a
bogus compound_order outside pageblock in next page. We will abort search
loop with blockpfn > end_pfn. Although we will limit blockpfn to end_pfn,
we will treat it as a successful isolation in strict mode as blockpfn is
not < end_pfn and return partial isolated pages. Then
isolate_freepages_range may success unexpectly with hole in isolated
range.
Link: https://lkml.kernel.org/r/20230901155141.249860-4-shikemeng@huaweicloud.com
Fixes: 9fcd6d2e052e ("mm, compaction: skip compound pages by order in free scanner")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
move_freelist_{head}/{tail}
We use move_freelist_head after list_for_each_entry_reverse to skip recent
pages. And there is no need to do actual move if all freepages are
searched in list_for_each_entry_reverse, e.g. freepage point to first
page in freelist. It's more intuitively to call list_is_first with list
entry as the first argument and list head as the second argument to check
if list entry is the first list entry instead of call list_is_last with
list entry and list head passed in reverse.
Similarly, call list_is_last in move_freelist_tail is more intuitively.
Link: https://lkml.kernel.org/r/20230901155141.249860-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fixes and cleanups to compaction", v3.
This is a series to do fix and clean up to compaction.
Patch 1-2 fix and clean up freepage list operation.
Patch 3-4 fix and clean up isolation of freepages
Patch 7 factor code to check if compaction is needed for allocation order.
More details can be found in respective patches.
This patch (of 6):
The freepage is chained with buddy_list in freelist head. Use buddy_list
instead of lru to correct the list operation.
Link: https://lkml.kernel.org/r/20230901155141.249860-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20230901155141.249860-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With fs/binfmt_elf.c fully refactored to use the new elf_load() helper,
there are no more users of vm_brk(), so remove it.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20230929032435.2391507-6-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
After the previous cleanups, we can now move some code from
calc_slab_order() to calculate_order() so it's executed just once, and
do some more cleanups.
- move the min_order and MAX_OBJS_PER_PAGE evaluation to
calculate_order().
- change calc_slab_order() parameter min_objects to min_order
Also make MAX_OBJS_PER_PAGE check more robust by considering also
min_objects in addition to slub_min_order. Otherwise this is not a
functional change.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
|
|
The main loop in calculate_order() currently tries to find an order with
at most 1/4 waste. If that's impossible (for particular large object
sizes), there's a fallback that will try to place one object within
slab_max_order.
If we expand the loop boundary to also allow up to 1/2 waste as the last
resort, we can remove the fallback and simplify the code, as the loop
will find an order for such sizes as well. Note we don't need to allow
more than 1/2 waste as that will never happen - calc_slab_order() would
calculate more objects to fit, reducing waste below 1/2.
Successfully finding an order in the loop (compared to the fallback)
will also have the benefit in trying to satisfy min_objects, because the
fallback was passing 1. Thus the resulting slab orders might be larger
(not because it would improve waste, but to reduce pressure on shared
locks), which is one of the goals of calculate_order().
For example, with nr_cpus=1 and 4kB PAGE_SIZE, slub_max_order=3, before
the patch we would get the following orders for these object sizes:
2056 to 10920 - order-3 as selected by the loop
10928 to 12280 - order-2 due to fallback, as <1/4 waste is not possible
12288 to 32768 - order-3 as <1/4 waste is again possible
After the patch:
2056 to 32768 - order-3, because even in the range of 10928 to 12280 we
try to satisfy the calculated min_objects.
As a result the code is simpler and gives more consistent results.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
|
|
calculate_order() currently has two nested loops. The inner one that
gradually modifies the acceptable waste from 1/16 up to 1/4, and the
outer one that decreases min_objects down to 2.
Upon closer inspection, the outer loop is unnecessary. Decreasing
min_objects could have in theory two effects to make the inner loop and
its call to calc_slab_order() succeed where a previous iteration with
higher min_objects would not:
- it could cause the min_objects-derived min_order to fit within
slub_max_order. But min_objects is already pre-capped to max_objects
that's derived from slub_max_order above the loops, so every iteration
tries at least slub_max_order in calc_slab_order()
- it could cause calc_slab_order() to be called with lower min_objects
thus potentially lower min_order in its loop. This would make a
difference if the lower order could cause the fractional waste test to
succeed where a higher order has already failed with same fract_leftover
in the previous iteration with a higher min_order. But that's not
possible, because increasing the order can only result in lower (or
same) fractional waste. If we increase the slab size 2 times, we will
fit at least 2 times the number of objects (thus same fraction of
waste), or it will allow us to fit one more object (lower fraction of
waste).
For more confidence I have tried adding a printk to notify when
decreasing min_objects resulted in a success, and simulated calculations
for a range of object sizes, nr_cpus and page_sizes. As expected, the
printk never triggered.
Thus remove the outer loop and adjust comments accordingly.
There's almost no functional change except a weird corner case when
slub_min_objects=1 on boot command line would cause the whole two nested
loops to be skipped before this patch. Now it would try to find the best
layout as usual, resulting in potentially higher orderthat minimizes
waste. This is not wrong and will be further expanded by the next patch.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
|
|
If calculate_order() can't fit even a single large object within
slub_max_order, it will try using the smallest necessary order that may
exceed slub_max_order but not MAX_ORDER.
Currently this is done with a call to calc_slab_order() which is
unnecessary. We can simply use get_order(size). No functional change.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Reviewed-and-tested-by: Jay Patel <jaypatel@linux.ibm.com>
|
|
Currently there are 2 parameters could be setup from kernel cmdline:
slub_min_order and slub_max_order. It's possible that the user
configured slub_min_order is bigger than the default slub_max_order
[1], which can still take effect, as calculate_oder() will use MAX_ORDER
as a fallback to check against, but has some downsides:
* the kernel message about SLUB will be strange in showing min/max
orders:
SLUB: HWalign=64, Order=9-3, MinObjects=0, CPUs=16, Nodes=1
* in calculate_order() called by each slab, the 2 loops of
calc_slab_order() will all be meaningless due to slub_min_order
is bigger than slub_max_order
* prevent future code cleanup like in [2].
Fix it by adding some sanity check to enforce the min/max semantics.
[1]. https://lore.kernel.org/lkml/21a0ba8b-bf05-0799-7c78-2a35f8c8d52a@os.amperecomputing.com/
[2]. https://lore.kernel.org/lkml/20230908145302.30320-7-vbabka@suse.cz/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
