| Age | Commit message (Collapse) | Author |
|---|
|
The below warning is reported when CONFIG_COMPACTION=n:
mm/compaction.c:56:27: warning: 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' defined but not used [-Wunused-const-variable=]
56 | static const unsigned int HPAGE_FRAG_CHECK_INTERVAL_MSEC = 500;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix it by moving 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' under
CONFIG_COMPACTION defconfig.
Also since this is just a 'static const int' type, use #define for it.
Link: https://lkml.kernel.org/r/1647608518-20924-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Nitin Gupta <nigupta@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Two processes under CLONE_VM cloning, user process can be corrupted by
seeing zeroed page unexpectedly.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage valid data
swap_slot_free_notify
delete zram entry
swap_readpage zeroed(invalid) data
pte_lock
map the *zero data* to userspace
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return and next refault will
read zeroed data
The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't
increase the refcount of swap slot at copy_mm so it couldn't catch up
whether it's safe or not to discard data from backing device. In the
case, only the lock it could rely on to synchronize swap slot freeing is
page table lock. Thus, this patch gets rid of the swap_slot_free_notify
function. With this patch, CPU A will see correct data.
CPU A CPU B
do_swap_page do_swap_page
SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path
swap_readpage original data
pte_lock
map the original data
swap_free
swap_range_free
bd_disk->fops->swap_slot_free_notify
swap_readpage read zeroed data
pte_unlock
pte_lock
if (!pte_same)
goto out_nomap;
pte_unlock
return
on next refault will see mapped data by CPU B
The concern of the patch would increase memory consumption since it
could keep wasted memory with compressed form in zram as well as
uncompressed form in address space. However, most of cases of zram uses
no readahead and do_swap_page is followed by swap_free so it will free
the compressed form from in zram quickly.
Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com
Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 6aa303defb74 ("mm, vmscan: only allocate and reclaim from
zones with pages managed by the buddy allocator") only zones with free
memory are included in a built zonelist. This is problematic when e.g.
all memory of a zone has been ballooned out when zonelists are being
rebuilt.
The decision whether to rebuild the zonelists when onlining new memory
is done based on populated_zone() returning 0 for the zone the memory
will be added to. The new zone is added to the zonelists only, if it
has free memory pages (managed_zone() returns a non-zero value) after
the memory has been onlined. This implies, that onlining memory will
always free the added pages to the allocator immediately, but this is
not true in all cases: when e.g. running as a Xen guest the onlined new
memory will be added only to the ballooned memory list, it will be freed
only when the guest is being ballooned up afterwards.
Another problem with using managed_zone() for the decision whether a
zone is being added to the zonelists is, that a zone with all memory
used will in fact be removed from all zonelists in case the zonelists
happen to be rebuilt.
Use populated_zone() when building a zonelist as it has been done before
that commit.
There was a report that QubesOS (based on Xen) is hitting this problem.
Xen has switched to use the zone device functionality in kernel 5.9 and
QubesOS wants to use memory hotplugging for guests in order to be able
to start a guest with minimal memory and expand it as needed. This was
the report leading to the patch.
Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com
Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been
producing garbage data due to the object not actually being maintained
by SLAB or SLUB.
Fix this by implementing __kfence_obj_info() that copies relevant
information to struct kmem_obj_info when the object was allocated by
KFENCE; this is called by a common kmem_obj_info(), which also calls the
slab/slub/slob specific variant now called __kmem_obj_info().
For completeness, kmem_dump_obj() now displays if the object was
allocated by KFENCE.
Link: https://lore.kernel.org/all/20220323090520.GG16885@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20220406131558.3558585-1-elver@google.com
Fixes: b89fb5ef0ce6 ("mm, kfence: insert KFENCE hooks for SLUB")
Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz> [slab]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kasan enables hw tags via kasan_enable_tagging() which based on the mode
passed via kernel command line selects the correct hw backend.
kasan_enable_tagging() is meant to be invoked indirectly via the cpu
features framework of the architectures that support these backends.
Currently the invocation of this function is guarded by
CONFIG_KASAN_KUNIT_TEST which allows the enablement of the correct backend
only when KUNIT tests are enabled in the kernel.
This inconsistency was introduced in commit:
ed6d74446cbf ("kasan: test: support async (again) and asymm modes for HW_TAGS")
... and prevents to enable MTE on arm64 when KUNIT tests for kasan hw_tags are
disabled.
Fix the issue making sure that the CONFIG_KASAN_KUNIT_TEST guard does not
prevent the correct invocation of kasan_enable_tagging().
Link: https://lkml.kernel.org/r/20220408124323.10028-1-vincenzo.frascino@arm.com
Fixes: ed6d74446cbf ("kasan: test: support async (again) and asymm modes for HW_TAGS")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When one tries to grow an existing memfd_secret with ftruncate, one gets
a panic [1]. For example, doing the following reliably induces the
panic:
fd = memfd_secret();
ftruncate(fd, 10);
ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
strcpy(ptr, "123456789");
munmap(ptr, 10);
ftruncate(fd, 20);
The basic reason for this is, when we grow with ftruncate, we call down
into simple_setattr, and then truncate_inode_pages_range, and eventually
we try to zero part of the memory. The normal truncation code does this
via the direct map (i.e., it calls page_address() and hands that to
memset()).
For memfd_secret though, we specifically don't map our pages via the
direct map (i.e. we call set_direct_map_invalid_noflush() on every
fault). So the address returned by page_address() isn't useful, and
when we try to memset() with it we panic.
This patch avoids the panic by implementing a custom setattr for
memfd_secret, which detects resizes specifically (setting the size for
the first time works just fine, since there are no existing pages to try
to zero), and rejects them with EINVAL.
One could argue growing should be supported, but I think that will
require a significantly more lengthy change. So, I propose a minimal
fix for the benefit of stable kernels, and then perhaps to extend
memfd_secret to support growing in a separate patch.
[1]:
BUG: unable to handle page fault for address: ffffa0a889277028
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060
Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:memset_erms+0x9/0x10
Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8
RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028
RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028
R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0
R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8
FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? zero_user_segments+0x82/0x190
truncate_inode_partial_folio+0xd4/0x2a0
truncate_inode_pages_range+0x380/0x830
truncate_setsize+0x63/0x80
simple_setattr+0x37/0x60
notify_change+0x3d8/0x4d0
do_sys_ftruncate+0x162/0x1d0
__x64_sys_ftruncate+0x1c/0x20
do_syscall_64+0x44/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet
CR2: ffffa0a889277028
[lkp@intel.com: secretmem_iops can be static]
Signed-off-by: kernel test robot <lkp@intel.com>
[axelrasmussen@google.com: return EINVAL]
Link: https://lkml.kernel.org/r/20220324210909.1843814-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20220412193023.279320-1-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Chuck Lever reported fsx-based xfstests generic 075 091 112 127 failing
when 5.18-rc1 NFS server exports tmpfs: bisected to recent tmpfs change.
Whilst nfsd_splice_action() does contain some questionable handling of
repeated pages, and Chuck was able to work around there, history from
Mark Hemment makes clear that there might be similar dangers elsewhere:
it was not a good idea for me to pass ZERO_PAGE down to unknown actors.
Revert shmem_file_read_iter() to using ZERO_PAGE for holes only when
iter_is_iovec(); in other cases, use the more natural iov_iter_zero()
instead of copy_page_to_iter().
We would use iov_iter_zero() throughout, but the x86 clear_user() is not
nearly so well optimized as copy to user (dd of 1T sparse tmpfs file
takes 57 seconds rather than 44 seconds).
And now pagecache_init() does not need to SetPageUptodate(ZERO_PAGE(0)):
which had caused boot failure on arm noMMU STM32F7 and STM32H7 boards
Link: https://lkml.kernel.org/r/9a978571-8648-e830-5735-1f4748ce2e30@google.com
Fixes: 56a8c8eb1eaf ("tmpfs: do not allocate pages on read")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Patrice CHOTARD <patrice.chotard@foss.st.com>
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Chuck Lever III <chuck.lever@oracle.com>
Cc: Mark Hemment <markhemm@googlemail.com>
Cc: Patrice CHOTARD <patrice.chotard@foss.st.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There isn't enough information to make this a useful check any more;
the useful parts of it were moved in earlier patches, so remove this
set of checks now.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-5-willy@infradead.org
|
|
Move the compound page overrun detection out of
CONFIG_HARDENED_USERCOPY_PAGESPAN and convert it to use folios so it's
enabled for more people.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-4-willy@infradead.org
|
|
If you have a vmalloc() allocation, or an address from calling vmap(),
you cannot overrun the vm_area which describes it, regardless of the
size of the underlying allocation. This probably doesn't do much for
security because vmalloc comes with guard pages these days, but it
prevents usercopy aborts when copying to a vmap() of smaller pages.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-3-willy@infradead.org
|
|
If you are copying to an address in the kmap region, you may not copy
across a page boundary, no matter what the size of the underlying
allocation. You can't kmap() a slab page because slab pages always
come from low memory.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220110231530.665970-2-willy@infradead.org
|
|
There are four types of kmalloc_caches: KMALLOC_NORMAL, KMALLOC_CGROUP,
KMALLOC_RECLAIM, and KMALLOC_DMA. While the first three types are
created using new_kmalloc_cache(), KMALLOC_DMA caches are created in a
separate logic. Let KMALLOC_DMA caches be also created using
new_kmalloc_cache(), to enhance readability.
Historically, there were only KMALLOC_NORMAL caches and KMALLOC_DMA
caches in the first place, and they were initialized in two separate
logics. However, when KMALLOC_RECLAIM was introduced in v4.20 via
commit 1291523f2c1d ("mm, slab/slub: introduce kmalloc-reclaimable
caches") and KMALLOC_CGROUP was introduced in v5.14 via
commit 494c1dfe855e ("mm: memcg/slab: create a new set of kmalloc-cg-<n>
caches"), their creations were merged with KMALLOC_NORMAL's only.
KMALLOC_DMA creation logic should be merged with them, too.
By merging KMALLOC_DMA initialization with other types, the following
two changes might occur:
1. The order dma-kmalloc-<n> caches added in slab_cache list may be
sorted by size. i.e. the order they appear in /proc/slabinfo may change
as well.
2. slab_state will be set to UP after KMALLOC_DMA is created.
In case of slub, freelist randomization is dependent on slab_state>=UP,
and therefore KMALLOC_DMA cache's freelist will not be randomized in
creation, but will be deferred to init_freelist_randomization().
Co-developed-by: JaeSang Yoo <jsyoo5b@gmail.com>
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
Signed-off-by: Ohhoon Kwon <ohkwon1043@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220410162511.656541-1-ohkwon1043@gmail.com
|
|
node_match() with node=NUMA_NO_NODE always returns 1.
Duplicate check by goto statement is meaningless. Remove it.
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220409144239.2649257-1-jsyoo5b@gmail.com
|
|
In allocate_slab(), __GFP_NOFAIL flag is removed twice when trying
higher-order allocation. Remove it.
Signed-off-by: Jiyoup Kim <lakroforce@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220409150538.1264-1-lakroforce@gmail.com
|
|
setup_object_debug() and setup_object() has unused parameter, "struct
slab *slab". Remove it.
By the commit 3ec0974210fe ("SLUB: Simplify debug code"),
setup_object_debug() were introduced to refactor previous code blocks
in the setup_object(). Previous code used SlabDebug() to init_object()
and init_tracking(). As the SlabDebug() takes "struct page *page" as
argument, the setup_object_debug() checks flag of "struct kmem_cache *s"
which doesn't require "struct page *page".
As the struct page were changed into struct slab by commit bb192ed9aa719
("mm/slub: Convert most struct page to struct slab by spatch"), but it's
still unused parameter.
Suggested-by: Ohhoon Kwon <ohkwon1043@gmail.com>
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220411072534.3372768-1-jsyoo5b@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Allow the compiler to optimize away unused percpu accesses and change
the local_lock_* macros back to inline functions
- A couple of fixes to static call insn patching
* tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/page_alloc: mark pagesets as __maybe_unused"
Revert "locking/local_lock: Make the empty local_lock_*() function a macro."
x86/percpu: Remove volatile from arch_raw_cpu_ptr().
static_call: Remove __DEFINE_STATIC_CALL macro
static_call: Properly initialise DEFINE_STATIC_CALL_RET0()
static_call: Don't make __static_call_return0 static
x86,static_call: Fix __static_call_return0 for i386
|
|
Merge fixes from Andrew Morton:
"9 patches.
Subsystems affected by this patch series: mm (migration, highmem,
sparsemem, mremap, mempolicy, and memcg), lz4, mailmap, and
MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add Tom as clang reviewer
mm/list_lru.c: revert "mm/list_lru: optimize memcg_reparent_list_lru_node()"
mailmap: update Vasily Averin's email address
mm/mempolicy: fix mpol_new leak in shared_policy_replace
mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0)
mm/sparsemem: fix 'mem_section' will never be NULL gcc 12 warning
lz4: fix LZ4_decompress_safe_partial read out of bound
highmem: fix checks in __kmap_local_sched_{in,out}
mm: migrate: use thp_order instead of HPAGE_PMD_ORDER for new page allocation.
|
|
Commit 405cc51fc104 ("mm/list_lru: optimize memcg_reparent_list_lru_node()")
has subtle races which are proving ugly to fix. Revert the original
optimization. If quantitative testing indicates that we have a
significant problem here then other implementations can be looked at.
Fixes: 405cc51fc104 ("mm/list_lru: optimize memcg_reparent_list_lru_node()")
Acked-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If mpol_new is allocated but not used in restart loop, mpol_new will be
freed via mpol_put before returning to the caller. But refcnt is not
initialized yet, so mpol_put could not do the right things and might
leak the unused mpol_new. This would happen if mempolicy was updated on
the shared shmem file while the sp->lock has been dropped during the
memory allocation.
This issue could be triggered easily with the below code snippet if
there are many processes doing the below work at the same time:
shmid = shmget((key_t)5566, 1024 * PAGE_SIZE, 0666|IPC_CREAT);
shm = shmat(shmid, 0, 0);
loop many times {
mbind(shm, 1024 * PAGE_SIZE, MPOL_LOCAL, mask, maxnode, 0);
mbind(shm + 128 * PAGE_SIZE, 128 * PAGE_SIZE, MPOL_DEFAULT, mask,
maxnode, 0);
}
Link: https://lkml.kernel.org/r/20220329111416.27954-1-linmiaohe@huawei.com
Fixes: 42288fe366c4 ("mm: mempolicy: Convert shared_policy mutex to spinlock")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org> [3.8]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If an mremap() syscall with old_size=0 ends up in move_page_tables(), it
will call invalidate_range_start()/invalidate_range_end() unnecessarily,
i.e. with an empty range.
This causes a WARN in KVM's mmu_notifier. In the past, empty ranges
have been diagnosed to be off-by-one bugs, hence the WARNing. Given the
low (so far) number of unique reports, the benefits of detecting more
buggy callers seem to outweigh the cost of having to fix cases such as
this one, where userspace is doing something silly. In this particular
case, an early return from move_page_tables() is enough to fix the
issue.
Link: https://lkml.kernel.org/r/20220329173155.172439-1-pbonzini@redhat.com
Reported-by: syzbot+6bde52d89cfdf9f61425@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are
initialized with 0 value, but the check is done with pte_none. 0 pte
however does not necessarily mean that pte_none will return true. e.g.
on xtensa it returns false, resulting in the following runtime warnings:
WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_out+0x51/0x108
__schedule+0x71a/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
Call Trace:
dump_stack+0xc/0x40
__warn+0x8f/0x174
warn_slowpath_fmt+0x48/0xac
__kmap_local_sched_in+0x50/0xe0
finish_task_switch$isra$0+0x1ce/0x2f8
__schedule+0x86e/0x9c4
preempt_schedule_irq+0xa0/0xe0
common_exception_return+0x5c/0x93
do_wp_page+0x30e/0x330
handle_mm_fault+0xa70/0xc3c
do_page_fault+0x1d8/0x3c4
common_exception+0x7f/0x7f
Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0.
Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com
Fixes: 5fbda3ecd14a ("sched: highmem: Store local kmaps in task struct")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix a VM_BUG_ON_FOLIO(folio_nr_pages(old) != nr_pages) crash.
With folios support, it is possible to have other than HPAGE_PMD_ORDER
THPs, in the form of folios, in the system. Use thp_order() to correctly
determine the source page order during migration.
Link: https://lkml.kernel.org/r/20220404165325.1883267-1-zi.yan@sent.com
Link: https://lore.kernel.org/linux-mm/20220404132908.GA785673@u2004/
Fixes: d68eccad3706 ("mm/filemap: Allow large folios to be added to the page cache")
Reported-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page_mapped_in_vma() sets nr_pages to 1, which is usually correct as we
only want to know about the precise page and not about other pages in
the folio. However, hugetlbfs does want to know about the entire hpage,
and using nr_pages to get the size of the hpage is wrong. We could
change page_mapped_in_vma() to special-case hugetlbfs pages, but it's
better to ignore nr_pages in page_vma_mapped_walk() and get the size
from the VMA instead.
Fixes: 2aff7a4755bed ("mm: Convert page_vma_mapped_walk to work on PFNs")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
[edit commit message, use hstate directly]
|
|
Simplify new_page() by unifying the THP and base page cases, and
handle orders other than 0 and HPAGE_PMD_ORDER correctly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
This wrapper around alloc_pages_vma() calls prep_transhuge_page(),
removing the obligation from the caller. This is in the same spirit
as __folio_alloc().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Unify alloc_misplaced_dst_page() and alloc_misplaced_dst_page_thp().
Removes an assumption that compound pages are HPAGE_PMD_ORDER.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
This removes an assumption that a large folio is HPAGE_PMD_ORDER
as well as letting us remove the call to prep_transhuge_page()
and a few hidden calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
|
|
Calling try_to_unmap() with TTU_SPLIT_HUGE_PMD and a folio that's not
mapped by a PMD causes oopses on arm64 because we now call page_folio()
on an invalid page. pmd_page() returns a valid page for non-leaf PMDs on
some architectures, so this bug escaped testing before now. Fix this bug
by delaying the call to pmd_page() until after we know the PMD is a leaf.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215804
Fixes: af28a988b313 ("mm/huge_memory: Convert __split_huge_pmd() to take a folio")
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Zorro Lang <zlang@redhat.com>
|
|
While reading the source code,
I noticed some language errors in the comments, so I fixed them.
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220407080958.3667-1-caoyixuan2019@email.szu.edu.cn
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we just
care about the core logic.
So move the page-writeback sysctls to its own file.
[akpm@linux-foundation.org: coding-style cleanups]
akpm@linux-foundation.org: fix CONFIG_SYSCTL=n warnings]
Link: https://lkml.kernel.org/r/20220129012955.26594-1-zhanglianjie@uniontech.com
Signed-off-by: zhanglianjie <zhanglianjie@uniontech.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we just
care about the core logic.
So move the oom_kill sysctls to their own file, mm/oom_kill.c
[sfr@canb.auug.org.au: null-terminate the array]
Link: https://lkml.kernel.org/r/20220216193202.28838626@canb.auug.org.au
Link: https://lkml.kernel.org/r/20220215093203.31032-1-sujiaxun@uniontech.com
Signed-off-by: sujiaxun <sujiaxun@uniontech.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Sort the output of debugfs alloc_traces and free_traces by the frequency
of allocation/freeing stack traces. Most frequently used stack traces
will be printed first, e.g. for easier memory leak debugging.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
Aggregate objects in slub cache by unique stack trace in addition to
caller address when producing contents of debugfs files alloc_traces and
free_traces in debugfs. Also add the stack traces to the debugfs output.
This makes it much more useful to e.g. debug memory leaks.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
|
|
Many stack traces are similar so there are many similar arrays.
Stackdepot saves each unique stack only once.
Replace field addrs in struct track with depot_stack_handle_t handle. Use
stackdepot to save stack trace.
The benefits are smaller memory overhead and possibility to aggregate
per-cache statistics in the following patch using the stackdepot handle
instead of matching stacks manually.
[ vbabka@suse.cz: rebase to 5.17-rc1 and adjust accordingly ]
This was initially merged as commit 788691464c29 and reverted by commit
ae14c63a9f20 due to several issues, that should now be fixed.
The problem of unconditional memory overhead by stackdepot has been
addressed by commit 2dba5eb1c73b ("lib/stackdepot: allow optional init
and stack_table allocation by kvmalloc()"), so the dependency on
stackdepot will result in extra memory usage only when a slab cache
tracking is actually enabled, and not for all CONFIG_SLUB_DEBUG builds.
The build failures on some architectures were also addressed, and the
reported issue with xfs/433 test did not reproduce on 5.17-rc1 with this
patch.
Signed-off-by: Oliver Glitta <glittao@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
|
|
set_track() either zeroes out the struct track or fills it, depending on
the addr parameter. This is unnecessary as there's only one place that
calls it for the initialization - init_tracking(). We can simply do the
zeroing there, with a single memset() that covers both TRACK_ALLOC and
TRACK_FREE as they are adjacent.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
In a later patch we want to add stackdepot support for object owner
tracking in slub caches, which is enabled by slub_debug boot parameter.
This creates a bootstrap problem as some caches are created early in
boot when slab_is_available() is false and thus stack_depot_init()
tries to use memblock. But, as reported by Hyeonggon Yoo [1] we are
already beyond memblock_free_all(). Ideally memblock allocation should
fail, yet it succeeds, but later the system crashes, which is a
separately handled issue.
To resolve this boostrap issue in a robust way, this patch adds another
way to request stack_depot_early_init(), which happens at a well-defined
point of time. In addition to build-time CONFIG_STACKDEPOT_ALWAYS_INIT,
code that's e.g. processing boot parameters (which happens early enough)
can call a new function stack_depot_want_early_init(), which sets a flag
that stack_depot_early_init() will check.
In this patch we also convert page_owner to this approach. While it
doesn't have the bootstrap issue as slub, it's also a functionality
enabled by a boot param and can thus request stack_depot_early_init()
with memblock allocation instead of later initialization with
kvmalloc().
As suggested by Mike, make stack_depot_early_init() only attempt
memblock allocation and stack_depot_init() only attempt kvmalloc().
Also change the latter to kvcalloc(). In both cases we can lose the
explicit array zeroing, which the allocations do already.
As suggested by Marco, provide empty implementations of the init
functions for !CONFIG_STACKDEPOT builds to simplify the callers.
[1] https://lore.kernel.org/all/YhnUcqyeMgCrWZbd@ip-172-31-19-208.ap-northeast-1.compute.internal/
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-and-tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
|
|
slub_kunit does not expect other debugging flags to be set when running
tests. When SLAB_RED_ZONE flag is set globally, test fails because the
flag affects number of errors reported.
To make slub_kunit unaffected by user specified debugging flags,
introduce SLAB_NO_USER_FLAGS to ignore them. With this flag, only flags
specified in the code are used and others are ignored.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/Yk0sY9yoJhFEXWOg@hyeyoo
|
|
alternate_node_alloc and ____cache_alloc_node are always called when
CONFIG_NUMA. So we can remove the unused !CONFIG_NUMA variant. Also
forward declaration for alternate_node_alloc is unnecessary. Remove
it too.
[ vbabka@suse.cz: move ____cache_alloc_node() declaration closer to
its callers ]
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220322091421.25285-1-linmiaohe@huawei.com
|
|
The local_lock() is now using a proper static inline function which is
enough for llvm to accept that the variable is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220328145810.86783-4-bigeasy@linutronix.de
|
|
Pull more filesystem folio updates from Matthew Wilcox:
"A mixture of odd changes that didn't quite make it into the original
pull and fixes for things that did. Also the readpages changes had to
wait for the NFS tree to be pulled first.
- Remove ->readpages infrastructure
- Remove AOP_FLAG_CONT_EXPAND
- Move read_descriptor_t to networking code
- Pass the iocb to generic_perform_write
- Minor updates to iomap, btrfs, ext4, f2fs, ntfs"
* tag 'folio-5.18d' of git://git.infradead.org/users/willy/pagecache:
btrfs: Remove a use of PAGE_SIZE in btrfs_invalidate_folio()
ntfs: Correct mark_ntfs_record_dirty() folio conversion
f2fs: Get the superblock from the mapping instead of the page
f2fs: Correct f2fs_dirty_data_folio() conversion
ext4: Correct ext4_journalled_dirty_folio() conversion
filemap: Remove AOP_FLAG_CONT_EXPAND
fs: Pass an iocb to generic_perform_write()
fs, net: Move read_descriptor_t to net.h
fs: Remove read_actor_t
iomap: Simplify is_partially_uptodate a little
readahead: Update comments
mm: remove the skip_page argument to read_pages
mm: remove the pages argument to read_pages
fs: Remove ->readpages address space operation
readahead: Remove read_cache_pages()
|
|
In the DAMON, the minimum wait time of the schemes decides whether the
kernel wakes up 'kdamon_fn()'. But since the minimum wait time is
initialized to zero, there are corner cases against the original
objective.
For example, if we have several schemes for one target, and if the wait
time of the first scheme is zero, the minimum wait time will set zero,
which means 'kdamond_fn()' should wake up to apply this scheme.
However, in the following scheme, wait time can be set to non-zero.
Thus, the mininum wait time will be set to non-zero, which can cause
sleeping this interval for 'kdamon_fn()' due to one deactivated last
scheme.
This commit prevents making DAMON monitoring inactive state due to other
deactivated schemes.
Link: https://lkml.kernel.org/r/20220330105302.32114-1-tome01@ajou.ac.kr
Signed-off-by: Jonghyeon Kim <tome01@ajou.ac.kr>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we use HW-tag based kasan and enable vmalloc support, we hit the
following bug. It is due to comparison between tagged object and
non-tagged pointer.
We need to reset the kasan tag when we need to compare tagged object and
non-tagged pointer.
kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440
CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1
Hardware name: MT6983(ENG) (DT)
Call trace:
add_scan_area+0xc4/0x244
kmemleak_scan_area+0x40/0x9c
layout_and_allocate+0x1e8/0x288
load_module+0x2c8/0xf00
__se_sys_finit_module+0x190/0x1d0
__arm64_sys_finit_module+0x20/0x30
invoke_syscall+0x60/0x170
el0_svc_common+0xc8/0x114
do_el0_svc+0x28/0xa0
el0_svc+0x60/0xf8
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768):
kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197
kmemleak: [name:kmemleak&] min_count = 0
kmemleak: [name:kmemleak&] count = 0
kmemleak: [name:kmemleak&] flags = 0x1
kmemleak: [name:kmemleak&] checksum = 0
kmemleak: [name:kmemleak&] backtrace:
module_alloc+0x9c/0x120
move_module+0x34/0x19c
layout_and_allocate+0x1c4/0x288
load_module+0x2c8/0xf00
__se_sys_finit_module+0x190/0x1d0
__arm64_sys_finit_module+0x20/0x30
invoke_syscall+0x60/0x170
el0_svc_common+0xc8/0x114
do_el0_svc+0x28/0xa0
el0_svc+0x60/0xf8
el0t_64_sync_handler+0x88/0xec
el0t_64_sync+0x1b4/0x1b8
Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In some cases it appears the invalidation of a hwpoisoned page fails
because the page is still mapped in another process. This can cause a
program to be continuously restarted and die when it page faults on the
page that was not invalidated. Avoid that problem by unmapping the
hwpoisoned page when we find it.
Another issue is that sometimes we end up oopsing in finish_fault, if
the code tries to do something with the now-NULL vmf->page. I did not
hit this error when submitting the previous patch because there are
several opportunities for alloc_set_pte to bail out before accessing
vmf->page, and that apparently happened on those systems, and most of
the time on other systems, too.
However, across several million systems that error does occur a handful
of times a day. It can be avoided by returning VM_FAULT_NOPAGE which
will cause do_read_fault to return before calling finish_fault.
Link: https://lkml.kernel.org/r/20220325161428.5068d97e@imladris.surriel.com
Fixes: e53ac7374e64 ("mm: invalidate hwpoison page cache page in fault path")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the kfence object is allocated to be used for objects vector, then
this slot of the pool eventually being occupied permanently since the
vector is never freed. The solutions could be (1) freeing vector when
the kfence object is freed or (2) allocating all vectors statically.
Since the memory consumption of object vectors is low, it is better to
chose (2) to fix the issue and it is also can reduce overhead of vectors
allocating in the future.
Link: https://lkml.kernel.org/r/20220328132843.16624-1-songmuchun@bytedance.com
Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The access to mlock_pvec is protected by disabling preemption via
get_cpu_var() or implicit by having preemption disabled by the caller
(in mlock_page_drain() case). This breaks on PREEMPT_RT since
folio_lruvec_lock_irq() acquires a sleeping lock in this section.
Create struct mlock_pvec which consits of the local_lock_t and the
pagevec. Acquire the local_lock() before accessing the per-CPU pagevec.
Replace mlock_page_drain() with a _local() version which is invoked on
the local CPU and acquires the local_lock_t and a _remote() version
which uses the pagevec from a remote CPU which offline.
Link: https://lkml.kernel.org/r/YjizWi9IY0mpvIfb@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mike reports that LTP memcg_stat_test usually leads to
memcg_stat_test 3 TINFO: Test unevictable with MAP_LOCKED
memcg_stat_test 3 TINFO: Running memcg_process --mmap-lock1 -s 135168
memcg_stat_test 3 TINFO: Warming up pid: 3460
memcg_stat_test 3 TINFO: Process is still here after warm up: 3460
memcg_stat_test 3 TFAIL: unevictable is 122880, 135168 expected
but may also lead to
memcg_stat_test 4 TINFO: Test unevictable with mlock
memcg_stat_test 4 TINFO: Running memcg_process --mmap-lock2 -s 135168
memcg_stat_test 4 TINFO: Warming up pid: 4271
memcg_stat_test 4 TINFO: Process is still here after warm up: 4271
memcg_stat_test 4 TFAIL: unevictable is 122880, 135168 expected
or both. A wee bit flaky.
follow_page_pte() used to have an lru_add_drain() per each page mlocked,
and the test came to rely on accurate stats. The pagevec to be drained
is different now, but still covered by lru_add_drain(); and, never mind
the test, I believe it's in everyone's interest that a bulk faulting
interface like populate_vma_page_range() or faultin_vma_page_range()
should drain its local pagevecs at the end, to save others sometimes
needing the much more expensive lru_add_drain_all().
This does not absolutely guarantee exact stats - the mlocking task can
be migrated between CPUs as it proceeds - but it's good enough and the
tests pass.
Link: https://lkml.kernel.org/r/47f6d39c-a075-50cb-1cfb-26dd957a48af@google.com
Fixes: b67bf49ce7aa ("mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 08095d6310a7 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.
As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed. Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.
Thus revert this patch and return proper bytes advised.
Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com
Fixes: 08095d6310a7ce ("mm: madvise: skip unmapped vma holes passed to process_madvise")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can extract both the file pointer and the pos from the iocb.
This simplifies each caller as well as allowing generic_perform_write()
to see more of the iocb contents in the future.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
- Refer to folios where appropriate, not pages (Matthew Wilcox)
- Eliminate references to the internal PG_readhead
- Use "readahead" consistently - not "read-ahead" or "read ahead"
(mostly Neil Brown)
- Clarify some sections that, on reflection, weren't very clear (Neil
Brown)
- Minor punctuation/spelling fixes (Neil Brown)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
The skip_page argument to read_pages controls if rac->_index is
incremented before returning from the function. Just open code that in
the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
