summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2012-06-05Bluetooth: Use lmp_ssp_capable() macroGustavo Padovan
Make the check more user friendly. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Send a configuration request after security confirmationMat Martineau
Sometimes an ACL link must be raised to a higher security level after an L2CAP connection is requested, but before a connection response is sent. In this case, a connection response sent by L2CAP was not immediately followed by a configuration request. Other code paths do send this configuration request right away. It was possible for the connection to stall while L2CAP waited for the remote device (like PTS) to trigger the configuration process. Here is an abbreviated hcidump of the failure case with PTS: 1337806446.051982 > ACL data: handle 43 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 1337806446.052050 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x000000b8 1337806446.595320 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 4097 scid 0x0041 1337806446.595673 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 0 1337806446.595679 < ACL data: handle 43 flags 0x00 dlen 10 L2CAP(s): Info req: type 2 1337806446.669835 > ACL data: handle 43 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00000028 1337806446.669899 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 1337806446.669906 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 1 <security setup here> 1337806446.769888 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0 At this point, the connection stalls and no further messages are sent on the L2CAP signaling channel. No data is received either. If we immediately send a configuration request after a successful connect response, the connection completes: 1337724090.041162 > ACL data: handle 43 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 1337724090.041236 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x000000b8 1337724090.597128 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(s): Connect req: psm 4097 scid 0x0041 1337724090.597236 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 0 1337724090.597244 < ACL data: handle 43 flags 0x00 dlen 10 L2CAP(s): Info req: type 2 1337724090.660842 > ACL data: handle 43 flags 0x02 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00000028 1337724090.660926 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 1337724090.660934 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 1 status 1 <security setup here> 1337724090.755162 < ACL data: handle 43 flags 0x00 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0041 result 0 status 0 1337724090.755171 < ACL data: handle 43 flags 0x00 dlen 23 L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 11 1337724091.361847 > ACL data: handle 43 flags 0x02 dlen 29 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 15 1337724091.863808 > ACL data: handle 43 flags 0x02 dlen 23 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 11 1337724091.863882 < ACL data: handle 43 flags 0x00 dlen 29 L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 15 1337724092.683745 > ACL data: handle 43 flags 0x02 dlen 12 L2CAP(d): cid 0x0040 len 8 [psm 4097] 0000: 00 00 11 22 33 44 34 2f ..."3D4/ Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Define L2CAP conf continuation flagAndrei Emeltchenko
Define Continuation flag which the only flag used from Flags field in L2CAP Configuration Request and Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove unneeded EXPORT_SYMBOLGustavo Padovan
After l2cap, sco and bluetooth modules merge some symbols doesn't need to be exported anymore. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove unnecessary headers includeGustavo Padovan
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in the subsystemGustavo Padovan
This is some leftover from the last patches that fixed style. It is mostly line over 80 characters fixes reported by checkpatch.pl. checkpatch.pl is clean for these files now. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove 'register' usage from the subsystemGustavo Padovan
Let the compiler chooses what is best. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove most of the inline usageGustavo Padovan
Only obvious cases were left as inline, mostly oneline functions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: trivial: Remove empty lineAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Preserve L2CAP flags valuesAndrei Emeltchenko
Previous callers of l2cap_build_conf_rsp in l2cap_config_req use flags instead of continuation flag hardcoded value. It does not change logic and preserve future possible flags. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use defined link key sizeAndrei Emeltchenko
Remove magic number with defined link key size. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSESzymon Janc
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to reset device on close instead of init, not to not reset at all. Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove dead int returnsGustavo Padovan
These functions were returning always 0, we just make then void. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove double check for BT_CONNECTEDGustavo Padovan
The same check is done just before call l2cap_streaming_send() Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Silent sparse warningsAndrei Emeltchenko
Silence warnings below: net/bluetooth/l2cap_core.c:1662:24: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:1662:27: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:1683:24: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:1683:27: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:2260:46: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:2574:33: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:2581:33: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:4556:24: warning: Using plain integer as NULL pointer net/bluetooth/l2cap_core.c:4556:27: warning: Using plain integer as NULL pointer Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Do not purge queue in Basic ModeGustavo Padovan
chan->tx_q is only initialized if we use ERTM or Streaming mode. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Enable ERTM by defaultMat Martineau
This enables the new receive and transmit state machines. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Set txwin values for streaming modeMat Martineau
The transmit window values must be configured for streaming mode, even though streaming mode does not have a window. This enables use of extended headers when the transmit window socket option is set to 64 or larger. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Remove unneccesary inlineMat Martineau
Let the compiler decide if inlining is appropriate. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Simplify the ERTM ack timeoutMat Martineau
Since l2cap_send_ack can trigger extra actions like sending iframes, don't call it. Just send an RR or RNR frame if an ack needs sending. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Use the ERTM transmit state machine from timeout handlersMat Martineau
Different states have different actions for retransmit and monitor timeouts, so remove the logic for those actions from the timer handlers. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Check rules when setting retransmit or monitor timersMat Martineau
The ERTM specification requires the retransmit timer to be cancelled when the monitor timer is set. The retransmit timer cannot be set again while the monitor timer is pending. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Use new header structures in l2cap_send_rr_or_rnrMat Martineau
struct l2cap_ctrl is now used, and the sframe is now sent directly rather than depending on a separate call. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Handle incoming REJ framesMat Martineau
REJ frames are sent by the remote device to request that all frames after a given sequence number be retransmitted. These are also an implicit indication that the remote device is not in a busy state and can receive new iframes. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Handle SREJ requests to resend unacked framesMat Martineau
When a remote device sends an SREJ, retransmit the frame with the corresponding sequence number (subject to special cases with poll and final flags). An SREJ is also an implicit indication the the remote device is not in a busy state. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Reassemble all available data when retransmissions succeed.Mat Martineau
As retransmitted packets arrive, attempt to reassemble SDUs. If all requested retransmissions have been received, acknowledge them and transition back to the RECV state. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Send SREJ frames when packets go missingMat Martineau
The ERTM specification lays out three scenarios for sending SREJ frames to request retransmission of specific frames. l2cap_send_srej requests all frames up to a given txseq that are not already queued for reassembly. l2cap_send_srej_tail only requests the most recent missing frame. l2cap_send_srej_list resends SREJ frames for data that was requested for resend but never received. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Add implementation for retransmitting all unacked framesMat Martineau
This adds l2cap_ertm_resend to retransmit frames based on the sequence numbers in chan->retrans_list. If the retransmit limit is reached for any individual frame is reached, the connection is dropped. skbs that are cloned already are copied to avoid modifying shared data (this is uncommon). To retransmit all frames, l2cap_retransmit_all now builds a list of all unacked sequence numbers and then calls l2cap_ertm_resend. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Add the ERTM receive state machineMat Martineau
This adds a top-level state machine with handlers for two receive states defined in the ERTM spec, RECV and SREJ_SENT. The reqseq value of the incoming frame is also validated at the top level and a disconnection is forced if it is invalid. The actions for the RECV and SREJ_SENT states are implemented according to the state tables in the ERTM specification. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Update l2cap_send_i_or_rr_or_rnr to fit the spec betterMat Martineau
This action now exactly matches what is defined in the ERTM specification, including clearing the remote busy flag and setting the retransmit timer rather than retransmitting frames directly. The spec does not retransmit frames as part of this action, since retransmission is only triggered by REJ, SREJ, or an RR with the final bit set. struct l2cap_ctrl is also used to set up header values. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Use the transmit state machine for busy state changesMat Martineau
This lets the transmit state machine handle local busy state changes, since different actions are taken in the different transmit states. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Refactor l2cap_send_ackMat Martineau
The function now encapsulates more of the logic to either immediately send an ack if the transmit window is over 75% full, or wait for the ack timer to expire if the transmit window is not full enough. It is also able to push out waiting iframes that can carry an acknowledgement. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Remove receive code that has been supercededMat Martineau
This deletes the receive code that had handlers for each frame type at the top level, and then had logic to determine the receive state within each handler. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Add streaming mode receive and incoming packet classifierMat Martineau
Streaming mode reception is fairly simple, with in-sequence frames being reassembled as they arrive. Out-of-sequence frames are dropped, and also clear any partially-assembled SDUs that may exist. The packet classifier determines if the txseq value of the incoming packet is expected, invalid (resulting in a disconnection), invalid (ignorable), duplicate, or having to do with an SREJ request that was previously sent. The rules for each classification are defined in the ERTM specification, and consolidating these rules in one place helps clarify the receive state machine. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Consolidate common receive code for ERTM and streaming modeMat Martineau
Creates a new l2cap_data_rcv function that combines previous code from l2cap_ertm_data_rcv and l2cap_data_channel. This reduces duplicate code for streaming mode, and sets up a framework for the ERTM receive state machine. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Refactor l2cap_send_sframeMat Martineau
The new implementation uses struct l2cap_ctrl to set up the sframe fields, and also reduces duplicate acks by canceling the ack timer whenever an RR or RNR frame is sent. sframe PDU generation is also split in to a separate function to separate it from the logic related to the connection state and sframe type. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Refactor l2cap_ertm_sendMat Martineau
The new implementation is aware of the new transmit state machine, and uses struct l2cap_ctrl to compose ERTM headers. It also has improved error handling for allocation failures, and does not send the packet until after all skb and channel data structures are updated. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Refactor l2cap_streaming_sendMat Martineau
This new implementation uses struct l2cap_ctrl to compose the streaming mode headers. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Add a new L2CAP ERTM transmit state machine.Mat Martineau
This implements a top-level transmit state machine with handlers for the two ERTM states defined in the specification: XMIT and WAIT_F. The state machine accepts an event and, optionally, a list of skbs to transmit. In addition to data transmission, the local busy state can be modified, acks are processed, and monitor and retransmit timeouts are handled. This mirrors the structure of the state tables in the spec. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Change default state of ERTM disable flagMat Martineau
This is to allow for ERTM state machine replacement in the patches that follow. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Fix early return from l2cap_chan_delMat Martineau
This fixes a regression from commit 2ead70b8390d199ca04cd35311b51f5f3676079e that is present in all kernels starting at v3.0. When L2CAP information was moved to struct l2cap_chan, a check was added to l2cap_chan_del to avoid certain cleanup operations when ERTM or streaming mode had not yet been initialized. The logic in the check did not take in to account that chan->conf_state is set to 0 in l2cap_chan_ready, so l2cap_chan_del failed to cancel timers and leaked memory any time the ERTM queues or lists were not empty. This change makes sure that l2cap_chan_del only returns early if ERTM initialization was not performed. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Free allocated ERTM SREJ list if init failsMat Martineau
If the ERTM SREJ list is properly allocated but the retransmit list allocation fails, the SREJ list must be freed before returning from l2cap_ertm_init. l2cap_chan_del will not clean up the SREJ list if l2cap_ertm_init returns a failure code. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_core.cGustavo Padovan
Follow net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_conn.cGustavo Padovan
Follow net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_event.cGustavo Padovan
Follow the net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_sysfs.cGustavo Padovan
Follow the net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_sock.cGustavo Padovan
Follow the net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in sco.cGustavo Padovan
Follow the net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in mgmt.cGustavo Padovan
Follow the coding style of the net subsystem. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix checking the wrong flag when accepting a socketVinicius Costa Gomes
Most probably a typo, the check should have been for BT_SK_DEFER_SETUP instead of BT_DEFER_SETUP (which right now only represents a socket option). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit (git 2.34.1) at 2025-09-12 08:41:26 +0000