summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2011-06-08Bluetooth: Add BT_POWER L2CAP socket option.Jaikumar Ganesh
Add BT_POWER socket option used to control the power characteristics of the underlying ACL link. When the remote end has put the link in sniff mode and the host stack wants to send data we need need to explicitly exit sniff mode to work well with certain devices (For example, A2DP on Plantronics Voyager 855). However, this causes problems with HID devices. Hence, moving into active mode when sending data, irrespective of who set the sniff mode has been made as a socket option. By default, we will move into active mode. HID devices can set the L2CAP socket option to prevent this from happening. Currently, this has been implemented for L2CAP sockets. This has been tested with incoming and outgoing L2CAP sockets for HID and A2DP. Based on discussions on linux-bluetooth and patches submitted by Andrei Emeltchenko. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Verify a pin code in pin_code_replyWaldemar Rymarkiewicz
As we cannot relay on a userspace mgmt api implementation we should verify if pin_code_reply in fact contains the secure pin code. If userspace replied with unsecure pincode when secure was required we will send pin_code_neg_reply to the controller. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove a magic numberWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix sparse & gcc warningsJohannes Berg
sparse complains about a few things that should be static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Set 'peer_addr_type' in hci_le_connect()Andre Guedes
Set the 'peer_addr_type' field of the LE Create Connection command sent in hci_le_connect(). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Check advertising cache in hci_connect()Andre Guedes
When connecting to a LE device, we need to check the advertising cache in order to know the address type of that device. If its advertising entry is not found, the connection is not established and hci_connect() returns error. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove useless check in hci_connect()Andre Guedes
There is no need to check the connection's state since hci_conn_add() has just created a new connection and its state has been set properly. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add 'dst_type' field to struct hci_connAndre Guedes
This patch adds a new field (dst_type) to the struct hci_conn which holds the type of the destination address (bdaddr_t dst). This approach is needed in order to use the struct hci_conn as an abstraction of LE connections in HCI Layer. For non-LE this field is ignored. This patch also set properly the 'dst_type' field after initializing LE hci_conn structures. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Refactor hci_auth_complete_evt functionWaldemar Rymarkiewicz
Replace if(conn) with if(!conn) checking to avoid too many nested statements Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Fix auth_complete_evt for legacy unitsWaldemar Rymarkiewicz
Legacy devices don't re-authenticate the link properly if a link key already exists. Thus, don't update sec_level for this case even if hci_auth_complete_evt indicates success. Otherwise the sec_level will not reflect a real security on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Advertising entries lifetimeAndre Guedes
This patch adds a timer to clear 'adv_entries' after three minutes. After some amount of time, the advertising entries cached during the last LE scan should be considered expired and they should be removed from the advertising cache. It was chosen a three minutes timeout as an initial attempt. This value might change in future. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Clear advertising cache before scanningAndre Guedes
The LE advertising cache should be cleared before performing a LE scanning. This will force the cache to contain only fresh advertising entries. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add Advertising Report Meta Event handlerAndre Guedes
This patch adds a function to handle LE Advertising Report Meta Events. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: LE advertising cacheAndre Guedes
This patch implements the LE advertising cache. It stores sensitive information (bdaddr and bdaddr_type so far) gathered from LE advertising report events. Only advertising entries from connectables devices are added to the cache. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Rename __l2cap_chan_close() to l2cap_chan_close()Gustavo F. Padovan
To make it consistent with the rest of the API. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove export of l2cap_chan_clear_timer()Gustavo F. Padovan
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c. This patch also adds a call to l2cap_chan_clear_timer() to the only place in __l2cap_sock_close() that wasn't calling it. It's safe call it there because l2cap_chan_clear_timer() check first for timer_peding(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: create channel timer to replace sk_timerGustavo F. Padovan
The new timer does not belong to struct sock, tought it still touch some sock things, but this will be sorted out soon. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add chan->chan_type struct memberGustavo F. Padovan
chan_type says if our chan is raw(direclty access to HCI), connection less or connection oriented. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create l2cap_chan_send()Gustavo F. Padovan
This move all the sending logic to l2cap_core.c, but we still have a socket dependence there, struct msghdr. It will be removed in some of the further commits. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create __l2cap_chan_close()Gustavo F. Padovan
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close(). At a first look it may not make sense, but with the further cleanups that will come it will. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove unnecessary use of hci_dev_list_lockJohan Hedberg
The get_connections function has no need to use hci_dev_list_lock. The code was there probably because of a copy-paste mistake. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Kill set but not used variable 'l2cap_sk' in ↵David Miller
rfcomm_sock_getsockopt_old() Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix set but not used warningGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Allow unsegmented SDU retries on sock_queue_rcv_skb failureRuiyi Zhang
In L2CAP_SDU_UNSEGMENTED case, if sock_queue_rcv_skb returns error, l2cap_ertm_reassembly_sdu should not return 0 so as to insert the skb into BUSY_QUEUE for later retries. Signed-off-by: Ruiyi Zhang <Ruiyi.Zhang@Atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-05net: Remove unnecessary semicolonsJoe Perches
Semicolons are not necessary after switch/while/for/if braces so remove them. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01bluetooth l2cap: fix locking in l2cap_global_chan_by_psmJohannes Berg
read_lock() ... read_unlock_bh() is clearly bogus. This was broken by commit 23691d75cdc69c3b285211b4d77746aa20a17d18 Author: Gustavo F. Padovan <padovan@profusion.mobi> Date: Wed Apr 27 18:26:32 2011 -0300 Bluetooth: Remove l2cap_sk_list Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (36 commits) HID: hid-multitouch: cosmetic changes, sort classes and devices HID: hid-multitouch: class MT_CLS_STANTUM is redundant with MT_CLS_CONFIDENCE HID: hid-multitouch: add support for Unitec panels HID: hid-multitouch: add support for Touch International panels HID: hid-multitouch: add support for GoodTouch panels HID: hid-multitouch: add support for CVTouch panels HID: hid-multitouch: add support for ActionStar panels HID: hiddev: fix race between hiddev_disconnect and hiddev_release HID: magicmouse: ignore 'ivalid report id' while switching modes HID: fix a crash in hid_report_raw_event() function. HID: hid-multitouch: add support for Elo TouchSystems 2515 IntelliTouch Plus HID: assorted usage updates from hut 1.12 HID: roccat: fix actual/startup profile sysfs attribute in koneplus HID: hid-multitouch: Add support for Lumio panels HID: 'name' and 'phys' in 'struct hid_device' can never be NULL HID: hid-multitouch: add support for Ilitek dual-touch panel HID: picolcd: Avoid compile warning/error triggered by copy_from_user() HID: add support for Logitech G27 wheel HID: hiddev: fix error path in hiddev_read when interrupted HID: add support for Sony Navigation Controller ...
2011-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1446 commits) macvlan: fix panic if lowerdev in a bond tg3: Add braces around 5906 workaround. tg3: Fix NETIF_F_LOOPBACK error macvlan: remove one synchronize_rcu() call networking: NET_CLS_ROUTE4 depends on INET irda: Fix error propagation in ircomm_lmp_connect_response() irda: Kill set but unused variable 'bytes' in irlan_check_command_param() irda: Kill set but unused variable 'clen' in ircomm_connect_indication() rxrpc: Fix set but unused variable 'usage' in rxrpc_get_transport() be2net: Kill set but unused variable 'req' in lancer_fw_download() irda: Kill set but unused vars 'saddr' and 'daddr' in irlan_provider_connect_indication() atl1c: atl1c_resume() is only used when CONFIG_PM_SLEEP is defined. rxrpc: Fix set but unused variable 'usage' in rxrpc_get_peer(). rxrpc: Kill set but unused variable 'local' in rxrpc_UDP_error_handler() rxrpc: Kill set but unused variable 'sp' in rxrpc_process_connection() rxrpc: Kill set but unused variable 'sp' in rxrpc_rotate_tx_window() pkt_sched: Kill set but unused variable 'protocol' in tc_classify() isdn: capi: Use pr_debug() instead of ifdefs. tg3: Update version to 3.119 tg3: Apply rx_discards fix to 5719/5720 ... Fix up trivial conflicts in arch/x86/Kconfig and net/mac80211/agg-tx.c as per Davem.
2011-05-18Merge branch 'master' into upstream.Jiri Kosina
This is sync with Linus' tree to receive KEY_IMAGES definition that went in through input tree.
2011-05-16bluetooth: Fix warnings in l2cap_core.cDavid S. Miller
net/bluetooth/l2cap_core.c: In function ‘l2cap_recv_frame’: net/bluetooth/l2cap_core.c:3758:15: warning: ‘sk’ may be used uninitialized in this function net/bluetooth/l2cap_core.c:3758:15: note: ‘sk’ was declared here net/bluetooth/l2cap_core.c:3791:15: warning: ‘sk’ may be used uninitialized in this function net/bluetooth/l2cap_core.c:3791:15: note: ‘sk’ was declared here Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-tx.c net/mac80211/sta_info.h
2011-05-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-05-12Bluetooth: Remove leftover debug messagesGustavo F. Padovan
They were added by me while testing and I forgot to remove. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-11Revert "Bluetooth: fix shutdown on SCO sockets"Linus Torvalds
This reverts commit f21ca5fff6e548833fa5ee8867239a8378623150. Quoth Gustavo F. Padovan: "Commit f21ca5fff6e548833fa5ee8867239a8378623150 can cause a NULL dereference if we call shutdown in a bluetooth SCO socket and doesn't wait the shutdown completion to call close(). Please revert it. I may have a fix for it soon, but we don't have time anymore, so revert is the way to go. ;)" Requested-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-11Bluetooth: Add support for disconnecting LE links via mgmtVinicius Costa Gomes
If we can't find a ACL link between the devices, we search the connection list one second time looking for LE links. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-11Bluetooth: Add support for sending connection events for LE linksVinicius Costa Gomes
We need to be able for receive events notifying that the connection was established, the connection attempt failed or that disconnection happened. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-11Bluetooth: Double check sec req for pre 2.1 deviceWaldemar Rymarkiewicz
In case of pre v2.1 devices authentication request will return success immediately if the link key already exists without any authentication process. That means, it's not possible to re-authenticate the link if you already have combination key and for instance want to re-authenticate to get the high security (use 16 digit pin). Therefore, it's necessary to check security requirements on auth complete event to prevent not enough secure connection. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-05Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_cs.c drivers/net/wireless/rtlwifi/pci.c net/bluetooth/l2cap_sock.c
2011-05-05Bluetooth: Remove l2cap_sk_listGustavo F. Padovan
A new list was added to replace the socket based one. This new list doesn't depent on sock and then fits better inside l2cap_core.c code. It also rename l2cap_chan_alloc() to l2cap_chan_create() and l2cap_chan_free() to l2cap_chan_destroy) Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-05Bluetooth: Handle psm == 0 case inside l2cap_add_psm()Gustavo F. Padovan
When the user doesn't specify a psm we have the choose one for the channel. Now we do this inside l2cap_add_psm(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-05-05Bluetooth: Add l2cap_add_psm() and l2cap_add_scid()Gustavo F. Padovan
The intention is to get rid of the l2cap_sk_list usage inside l2cap_core.c. l2cap_sk_list will soon be replaced by a list that does not depend on socket usage. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-next-2.6
2011-04-28Bluetooth: Fix updating conn->auth_type in hci_io_capa_request_evtJohan Hedberg
In some circumstances hci_get_auth_req will return a value different from the current conn->auth_type. In these cases update conn->auth_type so that when a user confirm request comes it doesn't falsely trigger auto-accept. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Add store_hint parameter to mgmt_new_keyJohan Hedberg
Even for keys that shouldn't be stored some use cases require the knowledge of a new key having been created so that the conclusion of a successful pairing can be made. Therefore, always send the mgmt_new_key event but add a store_hint parameter to it to indicate to user space whether the key should be stored or not. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Remove old_key_type from mgmt_ev_new_keyJohan Hedberg
User space shouldn't have any need for the old key type so remove it from the corresponding Management interface event. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix connection key type updating for buggy controllersJohan Hedberg
If a controller generates a changed combination key as its first key the connection key type will not be correctly set. In these situations make sure the update the connection key type when such a buggy controller is detected. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix old_key_type logic for non-persistent keysJohan Hedberg
Even if there's no previous key stored the connection might still be secured with a non-persistent key and in that case the key type in the hci_conn struct should be checked. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix link key persistent storage criteriaJohan Hedberg
Link keys should only be stored if very specific criteria of the authentication process are fulfilled. This patch essentially copies the criteria that user space has so far been using to the kernel side so that the management interface works properly. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix logic in hci_pin_code_request_evtJohan Hedberg
The mgmt_ev_pin_code_request event should not be sent to user space if the request gets rejected by the kernel due to the pairable flag not being set. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-04-28Bluetooth: Fix reason code for pairing rejectionJohan Hedberg
"Pairing not allowed" is 0x18 and not 0x16. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit (git 2.34.1) at 2025-09-16 22:35:44 +0000