summaryrefslogtreecommitdiff
path: root/net/ipv4
AgeCommit message (Collapse)Author
2022-05-05ping: fix address binding wrt vrfNicolas Dichtel
When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket, instead of an IP raw socket. In this case, 'ping' is unable to bind its socket to a local address owned by a vrflite. Before the patch: $ sysctl -w net.ipv4.ping_group_range='0 2147483647' $ ip link add blue type vrf table 10 $ ip link add foo type dummy $ ip link set foo master blue $ ip link set foo up $ ip addr add 192.168.1.1/24 dev foo $ ip addr add 2001::1/64 dev foo $ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2 ping: bind: Cannot assign requested address $ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2 ping6: bind icmp socket: Cannot assign requested address CC: stable@vger.kernel.org Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/20220502111539.0b7e4621@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04tcp: drop the hash_32() part from the index calculationWilly Tarreau
In commit 190cc82489f4 ("tcp: change source port randomizarion at connect() time"), the table_perturb[] array was introduced and an index was taken from the port_offset via hash_32(). But it turns out that hash_32() performs a multiplication while the input here comes from the output of SipHash in secure_seq, that is well distributed enough to avoid the need for yet another hash. Suggested-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04tcp: increase source port perturb table to 2^16Willy Tarreau
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately identify a client by forcing it to emit only 40 times more connections than there are entries in the table_perturb[] table. The previous two improvements consisting in resalting the secret every 10s and adding randomness to each port selection only slightly improved the situation, and the current value of 2^8 was too small as it's not very difficult to make a client emit 10k connections in less than 10 seconds. Thus we're increasing the perturb table from 2^8 to 2^16 so that the same precision now requires 2.6M connections, which is more difficult in this time frame and harder to hide as a background activity. The impact is that the table now uses 256 kB instead of 1 kB, which could mostly affect devices making frequent outgoing connections. However such components usually target a small set of destinations (load balancers, database clients, perf assessment tools), and in practice only a few entries will be visited, like before. A live test at 1 million connections per second showed no performance difference from the previous value. Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04tcp: dynamically allocate the perturb table used by source portsWilly Tarreau
We'll need to further increase the size of this table and it's likely that at some point its size will not be suitable anymore for a static table. Let's allocate it on boot from inet_hashinfo2_init(), which is called from tcp_init(). Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04tcp: add small random increments to the source portWilly Tarreau
Here we're randomly adding between 0 and 7 random increments to the selected source port in order to add some noise in the source port selection that will make the next port less predictable. With the default port range of 32768-60999 this means a worst case reuse scenario of 14116/8=1764 connections between two consecutive uses of the same port, with an average of 14116/4.5=3137. This code was stressed at more than 800000 connections per second to a fixed target with all connections closed by the client using RSTs (worst condition) and only 2 connections failed among 13 billion, despite the hash being reseeded every 10 seconds, indicating a perfectly safe situation. Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04tcp: use different parts of the port_offset for index and offsetWilly Tarreau
Amit Klein suggests that we use different parts of port_offset for the table's index and the port offset so that there is no direct relation between them. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04secure_seq: use the 64 bits of the siphash for port offset calculationWilly Tarreau
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit 7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output remained truncated to 32-bit only. In order to exploit more bits from the hash, let's make the functions return the full 64-bit of siphash_3u32(). We also make sure the port offset calculation in __inet_hash_connect() remains done on 32-bit to avoid the need for div_u64_rem() and an extra cost on 32-bit systems. Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-04memcg: accounting for objects allocated for new netdeviceVasily Averin
Creating a new netdevice allocates at least ~50Kb of memory for various kernel objects, but only ~5Kb of them are accounted to memcg. As a result, creating an unlimited number of netdevice inside a memcg-limited container does not fall within memcg restrictions, consumes a significant part of the host's memory, can cause global OOM and lead to random kills of host processes. The main consumers of non-accounted memory are: ~10Kb 80+ kernfs nodes ~6Kb ipv6_add_dev() allocations 6Kb __register_sysctl_table() allocations 4Kb neigh_sysctl_register() allocations 4Kb __devinet_sysctl_register() allocations 4Kb __addrconf_sysctl_register() allocations Accounting of these objects allows to increase the share of memcg-related memory up to 60-70% (~38Kb accounted vs ~54Kb total for dummy netdevice on typical VM with default Fedora 35 kernel) and this should be enough to somehow protect the host from misuse inside container. Other related objects are quite small and may not be taken into account to minimize the expected performance degradation. It should be separately mentonied ~300 bytes of percpu allocation of struct ipstats_mib in snmp6_alloc_dev(), on huge multi-cpu nodes it can become the main consumer of memory. This patch does not enables kernfs accounting as it affects other parts of the kernel and should be discussed separately. However, even without kernfs, this patch significantly improves the current situation and allows to take into account more than half of all netdevice allocations. Signed-off-by: Vasily Averin <vvs@openvz.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/354a0a5f-9ec3-a25c-3215-304eab2157bc@openvz.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03net: sysctl: introduce sysctl SYSCTL_THREETonghao Zhang
This patch introdues the SYSCTL_THREE. KUnit: [00:10:14] ================ sysctl_test (10 subtests) ================= [00:10:14] [PASSED] sysctl_test_api_dointvec_null_tbl_data [00:10:14] [PASSED] sysctl_test_api_dointvec_table_maxlen_unset [00:10:14] [PASSED] sysctl_test_api_dointvec_table_len_is_zero [00:10:14] [PASSED] sysctl_test_api_dointvec_table_read_but_position_set [00:10:14] [PASSED] sysctl_test_dointvec_read_happy_single_positive [00:10:14] [PASSED] sysctl_test_dointvec_read_happy_single_negative [00:10:14] [PASSED] sysctl_test_dointvec_write_happy_single_positive [00:10:14] [PASSED] sysctl_test_dointvec_write_happy_single_negative [00:10:14] [PASSED] sysctl_test_api_dointvec_write_single_less_int_min [00:10:14] [PASSED] sysctl_test_api_dointvec_write_single_greater_int_max [00:10:14] =================== [PASSED] sysctl_test =================== ./run_kselftest.sh -c sysctl ... ok 1 selftests: sysctl: sysctl.sh Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Simon Horman <horms@verge.net.au> Cc: Julian Anastasov <ja@ssi.bg> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenz Bauer <lmb@cloudflare.com> Cc: Akhmat Karakotov <hmukos@yandex-team.ru> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-03net: sysctl: use shared sysctl macroTonghao Zhang
This patch replace two, four and long_one to SYSCTL_XXX. Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Simon Horman <horms@verge.net.au> Cc: Julian Anastasov <ja@ssi.bg> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Cc: Shuah Khan <shuah@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Lorenz Bauer <lmb@cloudflare.com> Cc: Akhmat Karakotov <hmukos@yandex-team.ru> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-02ip_gre: Make GRE and GRETAP devices always NETIF_F_LLTXPeilin Ye
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and always mark GRE[TAP] devices as NETIF_F_LLTX, since we no longer need the TX lock (&txq->_xmit_lock). Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-30net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()Eric Dumazet
syzbot reported an UAF in ip_mc_sf_allow() [1] Whenever RCU protected list replaces an object, the pointer to the new object needs to be updated _before_ the call to kfree_rcu() or call_rcu() Because kfree_rcu(ptr, rcu) got support for NULL ptr only recently in commit 12edff045bc6 ("rcu: Make kfree_rcu() ignore NULL pointers"), I chose to use the conditional to make sure stable backports won't miss this detail. if (psl) kfree_rcu(psl, rcu); net/ipv6/mcast.c has similar issues, addressed in a separate patch. [1] BUG: KASAN: use-after-free in ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655 Read of size 4 at addr ffff88807d37b904 by task syz-executor.5/908 CPU: 0 PID: 908 Comm: syz-executor.5 Not tainted 5.18.0-rc4-syzkaller-00064-g8f4dd16603ce #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313 print_report mm/kasan/report.c:429 [inline] kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491 ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655 raw_v4_input net/ipv4/raw.c:190 [inline] raw_local_deliver+0x4d1/0xbe0 net/ipv4/raw.c:218 ip_protocol_deliver_rcu+0xcf/0xb30 net/ipv4/ip_input.c:193 ip_local_deliver_finish+0x2ee/0x4c0 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x1b3/0x200 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish+0x1cb/0x2f0 net/ipv4/ip_input.c:437 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0xaa/0xd0 net/ipv4/ip_input.c:556 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 netif_receive_skb_internal net/core/dev.c:5605 [inline] netif_receive_skb+0x13e/0x8e0 net/core/dev.c:5664 tun_rx_batched.isra.0+0x460/0x720 drivers/net/tun.c:1534 tun_get_user+0x28b7/0x3e30 drivers/net/tun.c:1985 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2015 call_write_iter include/linux/fs.h:2050 [inline] new_sync_write+0x38a/0x560 fs/read_write.c:504 vfs_write+0x7c0/0xac0 fs/read_write.c:591 ksys_write+0x127/0x250 fs/read_write.c:644 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f3f12c3bbff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 99 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 cc fd ff ff 48 RSP: 002b:00007f3f13ea9130 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f3f12d9bf60 RCX: 00007f3f12c3bbff RDX: 0000000000000036 RSI: 0000000020002ac0 RDI: 00000000000000c8 RBP: 00007f3f12ce308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000036 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffb68dd79f R14: 00007f3f13ea9300 R15: 0000000000022000 </TASK> Allocated by task 908: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:524 kasan_kmalloc include/linux/kasan.h:234 [inline] __do_kmalloc mm/slab.c:3710 [inline] __kmalloc+0x209/0x4d0 mm/slab.c:3719 kmalloc include/linux/slab.h:586 [inline] sock_kmalloc net/core/sock.c:2501 [inline] sock_kmalloc+0xb5/0x100 net/core/sock.c:2492 ip_mc_source+0xba2/0x1100 net/ipv4/igmp.c:2392 do_ip_setsockopt net/ipv4/ip_sockglue.c:1296 [inline] ip_setsockopt+0x2312/0x3ab0 net/ipv4/ip_sockglue.c:1432 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 753: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0x13d/0x180 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:200 [inline] __cache_free mm/slab.c:3439 [inline] kmem_cache_free_bulk+0x69/0x460 mm/slab.c:3774 kfree_bulk include/linux/slab.h:437 [inline] kfree_rcu_work+0x51c/0xa10 kernel/rcu/tree.c:3318 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x990 kernel/rcu/tree.c:3595 ip_mc_msfilter+0x712/0xb60 net/ipv4/igmp.c:2510 do_ip_setsockopt net/ipv4/ip_sockglue.c:1257 [inline] ip_setsockopt+0x32e1/0x3ab0 net/ipv4/ip_sockglue.c:1432 raw_setsockopt+0x274/0x2c0 net/ipv4/raw.c:861 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348 call_rcu+0x99/0x790 kernel/rcu/tree.c:3074 mpls_dev_notify+0x552/0x8a0 net/mpls/af_mpls.c:1656 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1938 call_netdevice_notifiers_extack net/core/dev.c:1976 [inline] call_netdevice_notifiers net/core/dev.c:1990 [inline] unregister_netdevice_many+0x92e/0x1890 net/core/dev.c:10751 default_device_exit_batch+0x449/0x590 net/core/dev.c:11245 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 The buggy address belongs to the object at ffff88807d37b900 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 4 bytes inside of 64-byte region [ffff88807d37b900, ffff88807d37b940) The buggy address belongs to the physical page: page:ffffea0001f4dec0 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88807d37b180 pfn:0x7d37b flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffff888010c41340 ffffea0001c795c8 ffff888010c40200 raw: ffff88807d37b180 ffff88807d37b000 000000010000001f 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x342040(__GFP_IO|__GFP_NOWARN|__GFP_COMP|__GFP_HARDWALL|__GFP_THISNODE), pid 2963, tgid 2963 (udevd), ts 139732238007, free_ts 139730893262 prep_new_page mm/page_alloc.c:2441 [inline] get_page_from_freelist+0xba2/0x3e00 mm/page_alloc.c:4182 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5408 __alloc_pages_node include/linux/gfp.h:587 [inline] kmem_getpages mm/slab.c:1378 [inline] cache_grow_begin+0x75/0x350 mm/slab.c:2584 cache_alloc_refill+0x27f/0x380 mm/slab.c:2957 ____cache_alloc mm/slab.c:3040 [inline] ____cache_alloc mm/slab.c:3023 [inline] __do_cache_alloc mm/slab.c:3267 [inline] slab_alloc mm/slab.c:3309 [inline] __do_kmalloc mm/slab.c:3708 [inline] __kmalloc+0x3b3/0x4d0 mm/slab.c:3719 kmalloc include/linux/slab.h:586 [inline] kzalloc include/linux/slab.h:714 [inline] tomoyo_encode2.part.0+0xe9/0x3a0 security/tomoyo/realpath.c:45 tomoyo_encode2 security/tomoyo/realpath.c:31 [inline] tomoyo_encode+0x28/0x50 security/tomoyo/realpath.c:80 tomoyo_realpath_from_path+0x186/0x620 security/tomoyo/realpath.c:288 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x21b/0x400 security/tomoyo/file.c:822 security_inode_getattr+0xcf/0x140 security/security.c:1350 vfs_getattr fs/stat.c:157 [inline] vfs_statx+0x16a/0x390 fs/stat.c:232 vfs_fstatat+0x8c/0xb0 fs/stat.c:255 __do_sys_newfstatat+0x91/0x110 fs/stat.c:425 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1356 [inline] free_pcp_prepare+0x549/0xd20 mm/page_alloc.c:1406 free_unref_page_prepare mm/page_alloc.c:3328 [inline] free_unref_page+0x19/0x6a0 mm/page_alloc.c:3423 __vunmap+0x85d/0xd30 mm/vmalloc.c:2667 __vfree+0x3c/0xd0 mm/vmalloc.c:2715 vfree+0x5a/0x90 mm/vmalloc.c:2746 __do_replace+0x16b/0x890 net/ipv6/netfilter/ip6_tables.c:1117 do_replace net/ipv6/netfilter/ip6_tables.c:1157 [inline] do_ip6t_set_ctl+0x90d/0xb90 net/ipv6/netfilter/ip6_tables.c:1639 nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101 ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1026 tcp_setsockopt+0x136/0x2520 net/ipv4/tcp.c:3696 __sys_setsockopt+0x2db/0x6a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff88807d37b800: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ffff88807d37b880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc >ffff88807d37b900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff88807d37b980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88807d37ba00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc Fixes: c85bb41e9318 ("igmp: fix ip_mc_sf_allow race [v5]") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Flavio Leitner <fbl@sysclose.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30ipv4: remove unnecessary type castingsYu Zhe
remove unnecessary void* type castings. Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30tcp: use tcp_skb_sent_after() instead in RACKPengcheng Yang
This patch doesn't change any functionality. Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-30tcp: drop skb dst in tcp_rcv_established()Eric Dumazet
In commit f84af32cbca7 ("net: ip_queue_rcv_skb() helper") I dropped the skb dst in tcp_data_queue(). This only dealt with so-called TCP input slow path. When fast path is taken, tcp_rcv_established() calls tcp_queue_rcv() while skb still has a dst. This was mostly fine, because most dsts at this point are not refcounted (thanks to early demux) However, TCP packets sent over loopback have refcounted dst. Then commit 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") came and had the effect of delaying skb freeing for an arbitrary time. If during this time the involved netns is dismantled, cleanup_net() frees the struct net with embedded net->ipv6.ip6_dst_ops. Then when eventually dst_destroy_rcu() is called, if (dst->ops->destroy) ... triggers an use-after-free. It is not clear if ip6_route_net_exit() lacks a rcu_barrier() as syzbot reported similar issues before the blamed commit. ( https://groups.google.com/g/syzkaller-bugs/c/CofzW4eeA9A/m/009WjumTAAAJ ) Fixes: 68822bdf76f1 ("net: generalize skb freeing deferral to per-cpu lists") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-29Merge branch 'tcp-pass-back-data-left-in-socket-after-receive' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux into for-5.19/io_uring-net Merge net branch with the required patch for supporting the io_uring feature that passes back whether we had more data in the socket or not. * 'tcp-pass-back-data-left-in-socket-after-receive' of git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux: tcp: pass back data left in socket after receive
2022-04-29Merge branch 'tcp-pass-back-data-left-in-socket-after-receive' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29tcp: pass back data left in socket after receiveJens Axboe
This is currently done for CMSG_INQ, add an ability to do so via struct msghdr as well and have CMSG_INQ use that too. If the caller sets msghdr->msg_get_inq, then we'll pass back the hint in msghdr->msg_inq. Rearrange struct msghdr a bit so we can add this member while shrinking it at the same time. On a 64-bit build, it was 96 bytes before this change and 88 bytes afterwards. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Link: https://lore.kernel.org/r/650c22ca-cffc-0255-9a05-2413a1e20826@kernel.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28net: SO_RCVMARK socket option for SO_MARK with recvmsg()Erin MacNeil
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK should be included in the ancillary data returned by recvmsg(). Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs(). Signed-off-by: Erin MacNeil <lnx.erin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28tcp: fix F-RTO may not work correctly when receiving DSACKPengcheng Yang
Currently DSACK is regarded as a dupack, which may cause F-RTO to incorrectly enter "loss was real" when receiving DSACK. Packetdrill to demonstrate: // Enable F-RTO and TLP 0 `sysctl -q net.ipv4.tcp_frto=2` 0 `sysctl -q net.ipv4.tcp_early_retrans=3` 0 `sysctl -q net.ipv4.tcp_congestion_control=cubic` // Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // RTT 10ms, RTO 210ms +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 // Send 2 data segments +0 write(4, ..., 2000) = 2000 +0 > P. 1:2001(2000) ack 1 // TLP +.022 > P. 1001:2001(1000) ack 1 // Continue to send 8 data segments +0 write(4, ..., 10000) = 10000 +0 > P. 2001:10001(8000) ack 1 // RTO +.188 > . 1:1001(1000) ack 1 // The original data is acked and new data is sent(F-RTO step 2.b) +0 < . 1:1(0) ack 2001 win 257 +0 > P. 10001:12001(2000) ack 1 // D-SACK caused by TLP is regarded as a dupack, this results in // the incorrect judgment of "loss was real"(F-RTO step 3.a) +.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop> // Never-retransmitted data(3001:4001) are acked and // expect to switch to open state(F-RTO step 3.b) +0 < . 1:1(0) ack 4001 win 257 +0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }% Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: generalize skb freeing deferral to per-cpu listsEric Dumazet
Logic added in commit f35f821935d8 ("tcp: defer skb freeing after socket lock is released") helped bulk TCP flows to move the cost of skbs frees outside of critical section where socket lock was held. But for RPC traffic, or hosts with RFS enabled, the solution is far from being ideal. For RPC traffic, recvmsg() has to return to user space right after skb payload has been consumed, meaning that BH handler has no chance to pick the skb before recvmsg() thread. This issue is more visible with BIG TCP, as more RPC fit one skb. For RFS, even if BH handler picks the skbs, they are still picked from the cpu on which user thread is running. Ideally, it is better to free the skbs (and associated page frags) on the cpu that originally allocated them. This patch removes the per socket anchor (sk->defer_list) and instead uses a per-cpu list, which will hold more skbs per round. This new per-cpu list is drained at the end of net_action_rx(), after incoming packets have been processed, to lower latencies. In normal conditions, skbs are added to the per-cpu list with no further action. In the (unlikely) cases where the cpu does not run net_action_rx() handler fast enough, we use an IPI to raise NET_RX_SOFTIRQ on the remote cpu. Also, we do not bother draining the per-cpu list from dev_cpu_dead() This is because skbs in this list have no requirement on how fast they should be freed. Note that we can add in the future a small per-cpu cache if we see any contention on sd->defer_lock. Tested on a pair of hosts with 100Gbit NIC, RFS enabled, and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around page recycling strategy used by NIC driver (its page pool capacity being too small compared to number of skbs/pages held in sockets receive queues) Note that this tuning was only done to demonstrate worse conditions for skb freeing for this particular test. These conditions can happen in more general production workload. 10 runs of one TCP_STREAM flow Before: Average throughput: 49685 Mbit. Kernel profiles on cpu running user thread recvmsg() show high cost for skb freeing related functions (*) 57.81% [kernel] [k] copy_user_enhanced_fast_string (*) 12.87% [kernel] [k] skb_release_data (*) 4.25% [kernel] [k] __free_one_page (*) 3.57% [kernel] [k] __list_del_entry_valid 1.85% [kernel] [k] __netif_receive_skb_core 1.60% [kernel] [k] __skb_datagram_iter (*) 1.59% [kernel] [k] free_unref_page_commit (*) 1.16% [kernel] [k] __slab_free 1.16% [kernel] [k] _copy_to_iter (*) 1.01% [kernel] [k] kfree (*) 0.88% [kernel] [k] free_unref_page 0.57% [kernel] [k] ip6_rcv_core 0.55% [kernel] [k] ip6t_do_table 0.54% [kernel] [k] flush_smp_call_function_queue (*) 0.54% [kernel] [k] free_pcppages_bulk 0.51% [kernel] [k] llist_reverse_order 0.38% [kernel] [k] process_backlog (*) 0.38% [kernel] [k] free_pcp_prepare 0.37% [kernel] [k] tcp_recvmsg_locked (*) 0.37% [kernel] [k] __list_add_valid 0.34% [kernel] [k] sock_rfree 0.34% [kernel] [k] _raw_spin_lock_irq (*) 0.33% [kernel] [k] __page_cache_release 0.33% [kernel] [k] tcp_v6_rcv (*) 0.33% [kernel] [k] __put_page (*) 0.29% [kernel] [k] __mod_zone_page_state 0.27% [kernel] [k] _raw_spin_lock After patch: Average throughput: 73076 Mbit. Kernel profiles on cpu running user thread recvmsg() looks better: 81.35% [kernel] [k] copy_user_enhanced_fast_string 1.95% [kernel] [k] _copy_to_iter 1.95% [kernel] [k] __skb_datagram_iter 1.27% [kernel] [k] __netif_receive_skb_core 1.03% [kernel] [k] ip6t_do_table 0.60% [kernel] [k] sock_rfree 0.50% [kernel] [k] tcp_v6_rcv 0.47% [kernel] [k] ip6_rcv_core 0.45% [kernel] [k] read_tsc 0.44% [kernel] [k] _raw_spin_lock_irqsave 0.37% [kernel] [k] _raw_spin_lock 0.37% [kernel] [k] native_irq_return_iret 0.33% [kernel] [k] __inet6_lookup_established 0.31% [kernel] [k] ip6_protocol_deliver_rcu 0.29% [kernel] [k] tcp_rcv_established 0.29% [kernel] [k] llist_reverse_order v2: kdoc issue (kernel bots) do not defer if (alloc_cpu == smp_processor_id()) (Paolo) replace the sk_buff_head with a single-linked list (Jakub) add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-25tcp: make sure treq->af_specific is initializedEric Dumazet
syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1] tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode. tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific. Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request(). [1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWATEric Dumazet
I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Doug Porter <dsp@fb.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25arp: fix unused variable warnning when CONFIG_PROC_FS=nYajun Deng
net/ipv4/arp.c:1412:36: warning: unused variable 'arp_seq_ops' [-Wunused-const-variable] Add #ifdef CONFIG_PROC_FS for 'arp_seq_ops'. Fixes: e968b1b3e9b8 ("arp: Remove #ifdef CONFIG_PROC_FS") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md modePeilin Ye
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25ip_gre: Make o_seqno start from 0 in native modePeilin Ye
For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect printing of memory size of IPVS connection hash table, from Pengcheng Yang. 2) Fix spurious EEXIST errors in nft_set_rbtree. 3) Remove leftover empty flowtable file, from Rongguang Wei. 4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-25netfilter: flowtable: Remove the empty fileRongguang Wei
CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also removed(nf_flow_table_ipv4.c is empty). Fixes: c42ba4290b2147aa ("netfilter: flowtable: remove ipv4/ipv6 modules") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-22tcp: ensure to use the most recently sent skb when filling the rate samplePengcheng Yang
If an ACK (s)acks multiple skbs, we favor the information from the most recently sent skb by choosing the skb with the highest prior_delivered count. But in the interval between receiving ACKs, we send multiple skbs with the same prior_delivered, because the tp->delivered only changes when we receive an ACK. We used RACK's solution, copying tcp_rack_sent_after() as tcp_skb_sent_after() helper to determine "which packet was sent last?". Later, we will use tcp_skb_sent_after() instead in RACK. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-22tcp: md5: incorrect tcp_header_len for incoming connectionsFrancesco Ruggeri
In tcp_create_openreq_child we adjust tcp_header_len for md5 using the remote address in newsk. But that address is still 0 in newsk at this point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock). Use the address from the request socket instead. Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetworks.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-22ipv4: Initialise ->flowi4_scope properly in ICMP handlers.Guillaume Nault
All the *_redirect() and *_update_pmtu() functions initialise their struct flowi4 variable with either __build_flow_key() or build_sk_flow_key(). When sk is provided, these functions use RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the scope based on the RTO_ONLINK bit and to mask the tos with IPTOS_RT_MASK. This patch modifies __build_flow_key() and build_sk_flow_key() to properly initialise ->flowi4_tos and ->flowi4_scope, so that the ICMP redirects and PMTU handlers don't need an extra call to ip_rt_fix_tos() before doing a fib lookup. That is, we: * Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope() instead, so that we don't have to rely on ip_rt_fix_tos() to adjust the scope anymore. * Apply IPTOS_RT_MASK to the tos, so that we don't need ip_rt_fix_tos() to do it for us. * Drop the ip_rt_fix_tos() calls that now become useless. The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash() which needs it as long as external callers still use the RTO_ONLINK flag. Note: This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is a stronger mask. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv4: Avoid using RTO_ONLINK with ip_route_connect().Guillaume Nault
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally, we don't have to rely on the RTO_ONLINK bit to properly set the scope of a flowi4 structure. We can just set ->flowi4_scope explicitly and avoid using RTO_ONLINK in ->flowi4_tos. This patch converts callers of ip_route_connect(). Instead of setting the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can: 1- Drop the tos parameter from ip_route_connect(): its value was entirely based on sk, which is also passed as parameter. 2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option instead of always initialising it with RT_SCOPE_UNIVERSE (let's define ip_sock_rt_scope() for this purpose). 3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is now properly initialised, we don't need to tell ip_rt_fix_tos() to adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(), which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK bit overload. Note: In the original ip_route_connect() code, __ip_route_output_key() might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the original tos variable. Now that we don't set RTO_ONLINK any more, this is not a problem and we can use fl4->flowi4_tos in flowi4_update_output(). Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv4: Don't reset ->flowi4_scope in ip_rt_fix_tos().Guillaume Nault
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE, either by manual field assignment, memset(0) of the whole structure or implicit structure initialisation of on-stack variables (RT_SCOPE_UNIVERSE actually equals 0). Therefore, we don't need to always initialise ->flowi4_scope in ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when the special RTO_ONLINK flag is present in the tos. This will allow some code simplification, like removing ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK entirely by properly initialising ->flowi4_scope, instead of overloading ->flowi4_tos with a special flag. Eventually, this will allow to convert ->flowi4_tos to dscp_t. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/microchip/lan966x/lan966x_main.c d08ed852560e ("net: lan966x: Make sure to release ptp interrupt") c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-18tcp: fix signed/unsigned comparisonEric Dumazet
Kernel test robot reported: smatch warnings: net/ipv4/tcp_input.c:5966 tcp_rcv_established() warn: unsigned 'reason' is never less than zero. I actually had one packetdrill failing because of this bug, and was about to send the fix :) v2: Andreas Schwab also pointed out that @reason needs to be negated before we reach tcp_drop_reason() Fixes: 4b506af9c5b8 ("tcp: add two drop reasons for tcp_ack()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: add drop reason support to tcp_ofo_queue()Eric Dumazet
packets in OFO queue might be redundant, and dropped. tcp_drop() is no longer needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: add drop reasons to tcp_rcv_synsent_state_process()Eric Dumazet
Re-use existing reasons. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: make tcp_rcv_synsent_state_process() drop monitor friendEric Dumazet
1) A valid RST packet should be consumed, to not confuse drop monitor. 2) Same remark for packet validating cross syn setup, even if we might ignore part of it. 3) When third packet of 3WHS is delayed, do not pretend the SYNACK was dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: add drop reason support to tcp_prune_ofo_queue()Eric Dumazet
Add one reason for packets dropped from OFO queue because of memory pressure. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: add two drop reasons for tcp_ack()Eric Dumazet
Add TCP_TOO_OLD_ACK and TCP_ACK_UNSENT_DATA drop reasons so that tcp_rcv_established() can report them. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: add drop reasons to tcp_rcv_state_process()Eric Dumazet
Add basic support for drop reasons in tcp_rcv_state_process() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: make tcp_rcv_state_process() drop monitor friendlyEric Dumazet
tcp_rcv_state_process() incorrectly drops packets instead of consuming it, making drop monitor very noisy, if not unusable. Calling tcp_time_wait() or tcp_done() is part of standard behavior, packets triggering these actions were not dropped. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: add drop reason support to tcp_validate_incoming()Eric Dumazet
Creates four new drop reasons for the following cases: 1) packet being rejected by RFC 7323 PAWS check 2) packet being rejected by SEQUENCE check 3) Invalid RST packet 4) Invalid SYN packet Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: get rid of rst_seq_matchEric Dumazet
Small cleanup in tcp_validate_incoming(), no need for rst_seq_match setting and testing. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17tcp: consume incoming skb leading to a resetEric Dumazet
Whenever tcp_validate_incoming() handles a valid RST packet, we should not pretend the packet was dropped. Create a special section at the end of tcp_validate_incoming() to handle this case. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: Handle l3mdev in ip_tunnel_init_flowDavid Ahern
Ido reported that the commit referenced in the Fixes tag broke a gre use case with dummy devices. Add a check to ip_tunnel_init_flow to see if the oif is an l3mdev port and if so set the oif to 0 to avoid the oif comparison in fib_lookup_good_nhc. Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-13net: ip: add skb drop reasons to ip forwardingMenglong Dong
Replace kfree_skb() which is used in ip6_forward() and ip_forward() with kfree_skb_reason(). The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for the case that the length of the packet exceeds MTU and can't fragment. Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-13net: ipv4: add skb drop reasons to ip_error()Menglong Dong
Eventually, I find out the handler function for inputting route lookup fail: ip_error(). The drop reasons we used in ip_error() are almost corresponding to IPSTATS_MIB_*, and following new reasons are introduced: SKB_DROP_REASON_IP_INADDRERRORS SKB_DROP_REASON_IP_INNOROUTES Isn't the name SKB_DROP_REASON_IP_HOSTUNREACH and SKB_DROP_REASON_IP_NETUNREACH more accurate? To make them corresponding to IPSTATS_MIB_*, we keep their name still. Signed-off-by: Menglong Dong <imagedong@tencent.com> Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>