summaryrefslogtreecommitdiff
path: root/net/mac80211/cfg.c
AgeCommit message (Collapse)Author
2011-09-27mac80211: save tx params per sdataEliad Peller
save and configure tx param per sdata, rather than per hardware. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27cfg80211/mac80211: add netdev param to set_txq_params()Eliad Peller
tx params are currently configured per hw, although they should be configured per interface. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27mac80211: Send the management frame at requested rateRajkumar Manoharan
Whenever the scan request or tx_mgmt is requesting not to use CCK rate for managemet frames through NL80211_ATTR_TX_NO_CCK_RATE attribute, then mac80211 should select appropriate least non-CCK rate. This could help to send P2P probes and P2P action frames at non 11b rates without diabling 11b rates globally. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-27nl80211/cfg80211: Add support to disable CCK rate for management frameRajkumar Manoharan
Add a new nl80211 attribute to specify whether to send the management frames in CCK rate or not. As of now the wpa_supplicant is disabling CCK rate at P2P init itself. So this patch helps to send P2P probe request/probe response/action frames being sent at non CCK rate in 2GHz without disabling 11b rates. This attribute is used with NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_FRAME commands to disable CCK rate for management frame transmission. Cc: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into ↵John W. Linville
for-davem
2011-09-14mac80211: add ssid config to bss information in AP-modeArik Nemtsov
Set SSID information from nl80211 beacon parameters. Advertise changes in SSID to low level drivers. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13mac80211: Remove mesh paths when an interface is removedJavier Cardona
When an interface is removed, the mesh paths associated with it should also be removed. This fixes a bug we observed when reloading a device driver module without reloading mac80211s. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-29Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2011-08-26mac80211: add uapsd_queues and max_sp params fieldsEliad Peller
Add uapsd_queues and max_sp fields to ieee80211_sta. These fields might be needed by low-level drivers in order to configure the AP. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-26mac80211: mesh gate fixesThomas Pedersen
Since a v1 of the mesh gate series was accidentally applied, this patch contains the changes in v2. These are: - automatically make mesh gate a root node. - use TU_TO_EXP_TIME macro. - initialize timer instead of checking for NULL timer function. - cleanups. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace make meshif mesh gateJavier Cardona
Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute, which will advertise this mesh node as being a mesh gate. NL80211_HWMP_ROOTMODE must be set or this will do nothing. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace set RANN intervalJavier Cardona
Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/staging/ath6kl/miscdrv/ar3kps/ar3kpsparser.c drivers/staging/ath6kl/os/linux/ar6000_drv.c
2011-08-08mac80211: remove offchannel_tx APIJohannes Berg
For iwlwifi, I decided not to use this API since it just increased the complexity for little gain. Since nobody else intends to use it, let's kill it again. If anybody later needs to have it, we can always revive it then. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-02rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTERStephen Hemminger
When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-18mac80211: reconfigure tx on device reconfigurationEliad Peller
Add tx_conf array to save the current tx queues configuration, and reconfig it on resume (ieee80211_reconfig). On resume, the driver is being reconfigured. Without reconfiguring the tx queues as well, the driver might configure the device to use wrong ac params (e.g. ps-poll instead of uapsd). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix CMAC racesJohannes Berg
Just like TKIP and CCMP, CMAC has the PN race. It might not actually be possible to hit it now since there aren't multiple ACs for management frames, but fix it anyway. Also move scratch buffers onto the stack. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08mac80211: fix CCMP racesJohannes Berg
Since we can process multiple packets at the same time for different ACs, but the PN is allocated from a single counter, we need to use an atomic value there. Use atomic64_t to make this cheaper on 64-bit platforms, other platforms will support this through software emulation, see lib/atomic64.c. We also need to use an on-stack scratch buf so that multiple packets won't corrupt each others scratch buffers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-06mac80211: support GTK rekey offloadJohannes Berg
This adds the necessary mac80211 APIs to support GTK rekey offload, mirroring the functionality from cfg80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-29mac80211: propagate information about STA WME support downArik Nemtsov
Add a memeber to the ieee80211_sta structure to indicate whether the STA supports WME. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-01nl80211: add testmode dump supportWey-Yi Guy
This adds dump support to testmode. The testmode dump support in nl80211 requires using two of the six cb->args, the rest can be used by the driver to figure out where the dump position is at or to store other data across invocations. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16nl80211: Move peer link state definition to nl80211Javier Cardona
These definitions need to be exposed now that we can set the peer link states via NL80211_ATTR_STA_PLINK_STATE. They were already being (opaquely) reported by NL80211_STA_INFO_PLINK_STATE. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-16mac80211: sparse RCU annotationsJohannes Berg
This adds sparse RCU annotations to most of mac80211, only the mesh code remains to be done. Due the the previous patches, the annotations are pretty simple. The only thing that this actually changes is removing the RCU usage of key->sta in debugfs since this pointer isn't actually an RCU-managed pointer (it only has a single assignment done before the key even goes live). As that is otherwise harmless, I decided to make it part of this patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12cfg80211/mac80211: avoid bounce back mac->cfg->mac on sched_scan_stoppedLuciano Coelho
When sched_scan_stopped was called by the driver, mac80211 calls cfg80211, which in turn was calling mac80211 back with a flag "driver_initiated". This flag was used so that mac80211 would do the necessary cleanup but would not call the driver. This was enough to prevent the bounce back between the driver and mac80211, but not between mac80211 and cfg80211. To fix this, we now do the cleanup in mac80211 before calling cfg80211. To help with locking issues, the workqueue was moved from cfg80211 to mac80211. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12mac80211: fix a few RCU issuesJohannes Berg
A few configuration functions correctly do rcu_read_lock() but don't correctly reference some pointers protected by RCU. Fix that. Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12mac80211: make key locking clearerJohannes Berg
The code in ieee80211_del_key() doesn't acquire the key_mtx properly when it dereferences the keys. It turns out that isn't actually necessary since the key_mtx itself seems to be redundant since all key manipulations are done under the RTNL, but as long as we have the key_mtx we should use it the right way too. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-12mac80211: Fix mesh-related build breakage...Yogesh Ashok Powar
net/mac80211/cfg.c: In function ‘sta_apply_parameters’: net/mac80211/cfg.c:746: error: ‘struct sta_info’ has no member named ‘plink_state’ make[1]: *** [net/mac80211/cfg.o] Error 1 make: *** [net/mac80211/mac80211.ko] Error 2 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11mac80211: add support for HW scheduled scanLuciano Coelho
Implement support for HW scheduled scan. The mac80211 code doesn't perform scheduled scans itself, but calls the driver to start and stop scheduled scans. This patch also creates a trace event class to be used by drv_hw_scan and the new drv_sched_scan_start and drv_sched_stop functions, in order to avoid duplicate code. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: allow installing keys for a meshifThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Let userspace drive the peer link management states.Javier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-11nl80211: Introduce NL80211_MESH_SETUP_USERSPACE_AMPEJavier Cardona
Introduce a new configuration option to support AMPE from userspace. Prior to this series we only supported authentication in userspace: an authentication daemon would authenticate peer candidates in userspace and hand them over to the kernel. From that point the mesh stack would take over and establish a peer link (Mesh Peering Management). These patches introduce support for Authenticated Mesh Peering Exchange in userspace. The userspace daemon implements the AMPE protocol and on successfull completion create mesh peers and install encryption keys. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05mac80211: add basic support for WoWLANJohannes Berg
This adds basic support for the new WoWLAN configuration in mac80211. The behaviour is completely offloaded to the driver though, with two new callbacks (suspend/resume). Options for the driver include a complete reconfiguration after wakeup, and exposing all the triggers it wants to support. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-05nl80211/cfg80211: WoWLAN supportJohannes Berg
This is based on (but now quite far from) the original work from Luis and Eliad. Add support for configuring WoWLAN triggers, and getting the configuration out again. Changes from the original patchset are too numerous to list, but one important change needs highlighting: the suspend() callback is passed NULL for the trigger configuration if userspace has not configured WoWLAN at all. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28mac80211: Add new API for rate selectionSujith Manoharan
This patch adds a new API for setting a TX rate mask in drivers that have rate control in either the firmware or hardware. This can be used for various purposes, for example, masking out the 11b rates in P2P operation. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-20mac80211: fix SMPS debugfs lockingJohannes Berg
The locking with SMPS requests means that the debugs file should lock the mgd mutex, not the iflist mutex. Calls to __ieee80211_request_smps() need to hold that mutex, so add an assertion. This has always been wrong, but for some reason never been noticed, probably because the locking error only happens while unassociated. Cc: stable@kernel.org [2.6.34+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12{mac|nl}80211: Add station connected timeMohammed Shafi Shajakhan
Add station connected time in debugfs. This will be helpful to get a measure of stability of the connection and for debugging stress issues Cc: Senthilkumar Balasubramanian <Senthilkumar.Balasubramanian@Atheros.com> Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211/mac80211: let userspace authenticate stationsJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12mac80211: ignore peers if security is enabled for this meshJavier Cardona
Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-12nl80211: rename NL80211_MESH_SETUP_VENDOR_PATH_SEL_IEJavier Cardona
To NL80211_MESH_SETUP_IE. This reflects our ability to insert any ie into a mesh beacon, not simply path selection ies. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-07nl80211: Add BSS parameters to stationPaul Stewart
This allows user-space monitoring of BSS parameters for the associated station. This is useful for debugging and verifying that the paramaters are as expected. [Exactly the same as before but bundled into a single message] Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-11mac80211: implement support for cfg80211_ops->{get,set}_ringparamJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-11mac80211: do not enable ps if 802.1x controlled port is unblockedJason Young
If dynamic_ps is disabled, enabling power save before the 4-way handshake completes may delay the station from being authorized to send/receive traffic, i.e. increase roaming times. It also may result in a failed 4-way handshake depending on the AP's timing requirements and beacon interval, and the station's listen interval. To fix this, prevent power save from being enabled while the station isn't authorized and recalculate power save whenever the station's authorized state changes. Signed-off-by: Jason Young <a.young.jason@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-01mac80211: add support for showing the last rx bitrateFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: support direct offchannel TX offloadJohannes Berg
For devices supported by iwlwifi sometimes off-channel transmissions need to be handled by the device completely. To support this mac80211 needs to pass the frame directly to the driver and not through the TX path as the driver needs the frame and channel information at the same time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
Conflicts: drivers/bluetooth/ath3k.c drivers/bluetooth/btusb.c
2011-02-09mac80211: Properly set work-item channel-type.Ben Greear
Some were indirectly set to NO_HT (zero), but I think it's better to explicitly set it in case the enum ever changes. In cfg.c, it seems the channel-type was just ignored (and thus always set to NO_HT). Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03mac80211: allow GO to scan like APJohannes Berg
There's no point in disallowing scanning for a GO interface when it's not beaconing yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-03mac80211: Be more careful when changing channels.Ben Greear
If we cannot set the channel type, set the channel back to the original. Don't update the driver hardware if nothing actually changed. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-02mac80211: fix TX status cookie in HW offload caseJohannes Berg
When the off-channel TX is done with remain-on-channel offloaded to hardware, the reported cookie is wrong as in that case we shouldn't use the SKB as the cookie but need to instead use the corresponding r-o-c cookie (XOR'ed with 2 to prevent API mismatches). Fix this by keeping track of the hw_roc_skb pointer just for the status processing and use the correct cookie to report in this case. We can't use the hw_roc_skb pointer itself because it is NULL'ed when the frame is transmitted to prevent it being used twice. This fixes a bug where the P2P state machine in the supplicant gets stuck because it never gets a correct result for its transmitted frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-12 00:45:07 +0000