summaryrefslogtreecommitdiff
path: root/net/mac80211/iface.c
AgeCommit message (Collapse)Author
2023-01-16Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"Eric Dumazet
This reverts commit 13e5afd3d773c6fc6ca2b89027befaaaa1ea7293. ieee80211_if_free() is already called from free_netdev(ndev) because ndev->priv_destructor == ieee80211_if_free syzbot reported: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 PID: 10041 Comm: syz-executor.0 Not tainted 6.2.0-rc2-syzkaller-00388-g55b98837e37d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pcpu_get_page_chunk mm/percpu.c:262 [inline] RIP: 0010:pcpu_chunk_addr_search mm/percpu.c:1619 [inline] RIP: 0010:free_percpu mm/percpu.c:2271 [inline] RIP: 0010:free_percpu+0x186/0x10f0 mm/percpu.c:2254 Code: 80 3c 02 00 0f 85 f5 0e 00 00 48 8b 3b 48 01 ef e8 cf b3 0b 00 48 ba 00 00 00 00 00 fc ff df 48 8d 78 20 48 89 f9 48 c1 e9 03 <80> 3c 11 00 0f 85 3b 0e 00 00 48 8b 58 20 48 b8 00 00 00 00 00 fc RSP: 0018:ffffc90004ba7068 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88823ffe2b80 RCX: 0000000000000004 RDX: dffffc0000000000 RSI: ffffffff81c1f4e7 RDI: 0000000000000020 RBP: ffffe8fffe8fc220 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 1ffffffff2179ab2 R12: ffff8880b983d000 R13: 0000000000000003 R14: 0000607f450fc220 R15: ffff88823ffe2988 FS: 00007fcb349de700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32220000 CR3: 000000004914f000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> netdev_run_todo+0x6bf/0x1100 net/core/dev.c:10352 ieee80211_register_hw+0x2663/0x4040 net/mac80211/main.c:1411 mac80211_hwsim_new_radio+0x2537/0x4d80 drivers/net/wireless/mac80211_hwsim.c:4583 hwsim_new_radio_nl+0xa09/0x10f0 drivers/net/wireless/mac80211_hwsim.c:5176 genl_family_rcv_msg_doit.isra.0+0x1e6/0x2d0 net/netlink/genetlink.c:968 genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline] genl_rcv_msg+0x4ff/0x7e0 net/netlink/genetlink.c:1065 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x712/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2559 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 13e5afd3d773 ("wifi: mac80211: fix memory leak in ieee80211_if_add()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Zhengchao Shao <shaozhengchao@huawei.com> Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230113124326.3533978-1-edumazet@google.com
2023-01-10wifi: mac80211: fix MLO + AP_VLAN checkFelix Fietkau
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was preventing adding more than one 4-addr AP_VLAN regardless of the MLO status. Fix this by adding missing extra checks. Fixes: ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: add support for restricting netdev features per vifFelix Fietkau
This can be used to selectively disable feature flags for checksum offload, scatter/gather or GSO by changing vif->netdev_features. Removing features from vif->netdev_features does not affect the netdev features themselves, but instead fixes up skbs in the tx path so that the offloads are not needed in the driver. Aside from making it easier to deal with vif type based hardware limitations, this also makes it possible to optimize performance on hardware without native GSO support by declaring GSO support in hw->netdev_features and removing it from vif->netdev_features. This allows mac80211 to handle GSO segmentation after the sta lookup, but before itxq enqueue, thus reducing the number of unnecessary sta lookups, as well as some other per-packet processing. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20221010094338.78070-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: remove unnecessary synchronize_net()Johannes Berg
The call to ieee80211_do_stop() right after will also do synchronize_rcu() to ensure the SDATA_STATE_RUNNING bit is cleared, so we don't need to synchronize_net() here. Change-Id: Id9f9ffcf195002013e5d9fde288877d219780864 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: mac80211: fix memory leak in ieee80211_if_add()Zhengchao Shao
When register_netdevice() failed in ieee80211_if_add(), ndev->tstats isn't released. Fix it. Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221117064500.319983-1-shaozhengchao@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: mac80211: Drop support for TX push pathAlexander Wetzel
All drivers are now using mac80211 internal queues (iTXQs). Drop mac80211 internal support for the old push path. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: netdev compatible TX stop for iTXQ driversAlexander Wetzel
Properly handle TX stop for internal queues (iTXQs) within mac80211. mac80211 must not stop netdev queues when using mac80211 iTXQs. For these drivers the netdev interface is created with IFF_NO_QUEUE. While netdev still drops frames for IFF_NO_QUEUE interfaces when we stop the netdev queues, it also prints a warning when this happens: Assuming the mac80211 interface is called wlan0 we would get "Virtual device wlan0 asks to queue packet!" when netdev has to drop a frame. This patch is keeping the harmless netdev queue starts for iTXQ drivers. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: unlock on error in ieee80211_can_powered_addr_change()Dan Carpenter
Unlock before returning -EOPNOTSUPP. Fixes: 3c06e91b40db ("wifi: mac80211: Support POWERED_ADDR_CHANGE feature") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: implement link switchingJohannes Berg
Implement an API function and debugfs file to switch active links. Also provide an async version of the API so drivers can call it in arbitrary contexts, e.g. while in the authorized callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: move link code to a new fileJohannes Berg
We probably should've done that originally, we already have about 300 lines of code there, and will add more. Move all the link code we wrote to a new file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: Support POWERED_ADDR_CHANGE featureJames Prestwood
Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE. The motivation behind this functionality is to fix limitations of address randomization on frequencies which are disallowed in world roaming. The way things work now, if a client wants to randomize their address per-connection it must power down the device, change the MAC, and power back up. Here lies a problem since powering down the device may result in frequencies being disabled (until the regdom is set). If the desired BSS is on one such frequency the client is unable to connect once the phy is powered again. For mac80211 based devices changing the MAC while powered is possible but currently disallowed (-EBUSY). This patch adds some logic to allow a MAC change while powered by removing the interface, changing the MAC, and adding it again. mac80211 will advertise support for this feature so userspace can determine the best course of action e.g. disallow address randomization on certain frequencies if not supported. There are certain limitations put on this which simplify the logic: - No active connection - No offchannel work, including scanning. Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent VLANs on MLDsJohannes Berg
Do not allow VLANs to be added to AP interfaces that are MLDs, this isn't going to work because the link structs aren't propagated to the VLAN interfaces yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161144.8c88531146e9.If2ef9a3b138d4f16ed2fda91c852da156bdf5e4d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-26wifi: mac80211: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: properly implement MLO key handlingJohannes Berg
Implement key installation and lookup (on TX and RX) for MLO, so we can use multiple GTKs/IGTKs/BIGTKs. Co-authored-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: set link BSSIDShaul Triebitz
For an AP interface, set the link BSSID when the link is initialized. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: fix link data leakJohannes Berg
During the code reshuffling, I accidentally set this to NULL before using it, fix that to fix the link data leak. Fixes: d3e2439b0f33 ("wifi: mac80211: fix link manipulation") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211: verify link addresses are differentJohannes Berg
When adding multiple links, verify that they all have different addresses. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-18wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()Tetsuo Handa
lockdep complains use of uninitialized spinlock at ieee80211_do_stop() [1], for commit f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif that is being stopped") guards clear_bit() using fq.lock even before fq_init() from ieee80211_txq_setup_flows() initializes this spinlock. According to discussion [2], Toke was not happy with expanding usage of fq.lock. Since __ieee80211_wake_txqs() is called under RCU read lock, we can instead use synchronize_rcu() for flushing ieee80211_wake_txqs(). Link: https://syzkaller.appspot.com/bug?extid=eceab52db7c4b961e9d6 [1] Link: https://lkml.kernel.org/r/874k0zowh2.fsf@toke.dk [2] Reported-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif that is being stopped") Tested-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com> Acked-by: Toke Høiland-Jørgensen <toke@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/9cc9b81d-75a3-3925-b612-9d0ad3cab82b@I-love.SAKURA.ne.jp
2022-07-15wifi: mac80211: release channel context on link stopJohannes Berg
When a link is stopped for removal, release the channel context it may have. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: fix link manipulationJohannes Berg
When we add non-deflink pointers, we need to remove the link[0] pointer to deflink in case link[0] is not valid afterwards. Also, we need to add that back when there are no more valid links. Reorg the code to fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: don't set link address for stationJohannes Berg
We need to handle the link addresses for station differently, they will be determined by the association code, stored, and then applied when the links are actually created on success, cfg80211 will fill in the right addresses per the data we're sending back to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: provide link ID in link_confJohannes Berg
It might be useful to drivers to be able to pass only the link_conf pointer, rather than both the pointer and the link_id; add the link_id to the link_conf to facility that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: set up/tear down client vif links properlyJohannes Berg
In station/client mode, the link data needs a bit more initialization and destruction than just zero-init and kfree() respectively, implement that. This required some shuffling of the link data handling in general, as we should set it up in setup and do the teardown in teardown, otherwise we're asymmetric in case of interface type changes. Also stop using kfree_rcu(), we cannot guarantee that nothing is scheduling things that live within the link (e.g. the u.mgd.request_smps_work) until we're sure it cannot be referenced anymore, therefore synchronize instead. This isn't very efficient, but we can always optimize it later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: RCU-ify link/link_conf pointersJohannes Berg
Since links can be added and removed dynamically, we need to somehow protect the sdata->link[] and vif->link_conf[] array pointers from disappearing when accessing them without locks. RCU-ify the pointers to achieve this, which requires quite a bit of rework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01wifi: mac80211: switch airtime fairness back to deficit round-robin schedulingFelix Fietkau
This reverts commits 6a789ba679d652587532cec2a0e0274fda172f3b and 2433647bc8d983a543e7d31b41ca2de1c7e2c198. The virtual time scheduler code has a number of issues: - queues slowed down by hardware/firmware powersave handling were not properly handled. - on ath10k in push-pull mode, tx queues that the driver tries to pull from were starved, causing excessive latency - delay between tx enqueue and reported airtime use were causing excessively bursty tx behavior The bursty behavior may also be present on the round-robin scheduler, but there it is much easier to fix without introducing additional regressions Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Link: https://lore.kernel.org/r/20220625212411.36675-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211: do not wake queues on a vif that is being stoppedFelix Fietkau
When a vif is being removed and sdata->bss is cleared, __ieee80211_wake_txqs can still be called on it, which crashes as soon as sdata->bss is being dereferenced. To fix this properly, check for SDATA_STATE_RUNNING before waking queues, and take the fq lock when setting it (to ensure that __ieee80211_wake_txqs observes the change when running on a different CPU) Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@kernel.org> Link: https://lore.kernel.org/r/20220531190824.60019-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: RCU-ify link STA pointersJohannes Berg
We need to be able to access these in a race-free way under traffic while adding/removing them, so RCU-ify the pointers. This requires passing a link_sta to a lot of functions so we don't have to do the RCU handling everywhere. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add vif link addition/removalJohannes Berg
Add the necessary infrastructure, including a new driver method, to add/remove links to/from an interface. Also add the missing link address to bss_conf (which we use as link_conf too), and fill it, in station mode for now just randomly, in AP mode we get the address from cfg80211 since the link must be created with an address first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make some SMPS code MLD-awareJohannes Berg
Start making some SMPS related code MLD-aware. This isn't really done yet, but again cuts down our 'deflink' reliance. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add link_id to vht.c code for MLOJohannes Berg
Update the code in vht.c and add the link_id parameter where necessary. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: refactor some link setup codeJohannes Berg
We don't need to setup lists and work structs every time we switch the interface type, factor that out into a new ieee80211_link_init() function and use it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make channel context code MLO-awareJohannes Berg
Make the channel context code MLO aware, along with some functions that it uses, so that the chan.c file is now MLD-clean and no longer uses deflink/bss_conf/etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: add per-link configuration pointerJohannes Berg
Add pointers so we can start using link_id throughout the code, even if for now only link ID 0 is valid, pointing to the "built-in" bss_conf, which is used by drivers that are not aware of MLD. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: reorg some iface data structs for MLDJohannes Berg
Start reorganizing interface related data structures toward MLD. The most complex part here is for the keys, since we have to split the various kinds of GTKs off to the link but still need to use (for WEP) the other keys as a fallback even for multicast frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-10wifi: mac80211: remove cipher scheme supportJohannes Berg
The only driver using this was iwlwifi, where we just removed the support because it was never really used. Remove the code from mac80211 as well. Change-Id: I1667417a5932315ee9d81f5c233c56a354923f09 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-26mac80211: add support for .ndo_fill_forward_pathFelix Fietkau
This allows drivers to provide a destination device + info for flow offload Only supported in combination with 802.3 encap offload Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20211112112223.1209-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15mac80211: fix monitor_sdata RCU/locking assertionsJohannes Berg
Since commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") we've not only been protecting the pointer to monitor_sdata with the RTNL, but also with the wiphy->mtx. This is relevant in a number of lockdep assertions, e.g. the one we hit in ieee80211_set_monitor_channel(). However, we're now protecting all the assignments/dereferences, even the one in interface iter, with the wiphy->mtx, so switch over the lockdep assertions to that lock. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20211112135143.cb8e8ceffef3.Iaa210f16f6904c8a7a24954fb3396da0ef86ec08@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert mac80211 from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211019162816.1384077-1-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-28mac80211: MBSSID support in interface handlingJohn Crispin
Configure multiple BSSID and enhanced multi-BSSID advertisement (EMA) parameters in mac80211 for AP mode. For each interface, 'mbssid_tx_vif' points to the transmitting interface of the MBSSID set. The pointer is set to NULL if MBSSID is disabled. Function ieee80211_stop() is modified to always bring down all the non-transmitting interfaces first and the transmitting interface last. Signed-off-by: John Crispin <john@phrozen.org> Co-developed-by: Aloka Dixit <alokad@codeaurora.org> Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/20210916025437.29138-3-alokad@codeaurora.org [slightly change logic to be more obvious] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-24mac80211: introduce individual TWT support in AP modeLorenzo Bianconi
Introduce TWT action frames parsing support to mac80211. Currently just individual TWT agreement are support in AP mode. Whenever the AP receives a TWT action frame from an associated client, after performing sanity checks, it will notify the underlay driver with requested parameters in order to check if they are supported and if there is enough room for a new agreement. The driver is expected to set the agreement result and report it to mac80211. Drivers supporting this have two new callbacks: - add_twt_setup (mandatory) - twt_teardown_request (optional) mac80211 will send an action frame reply according to the result reported by the driver. Tested-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/257512f2e22ba42b9f2624942a128dd8f141de4b.1629741512.git.lorenzo@kernel.org [use le16p_replace_bits(), minor cleanups, use (void *) casts, fix to use ieee80211_get_he_iftype_cap() correctly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-17mac80211: add support for BSS color changeJohn Crispin
The color change announcement is very similar to how CSA works where we have an IE that includes a counter. When the counter hits 0, the new color is applied via an updated beacon. This patch makes the CSA counter functionality reusable, rather than implementing it again. This also allows for future reuse incase support for other counter IEs gets added. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/057c1e67b82bee561ea44ce6a45a8462d3da6995.1625247619.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-08-13mac80211: Fix monitor MTU limit so that A-MSDUs get throughJohan Almbladh
The maximum MTU was set to 2304, which is the maximum MSDU size. While this is valid for normal WLAN interfaces, it is too low for monitor interfaces. A monitor interface may receive and inject MPDU frames, and the maximum MPDU frame size is larger than 2304. The MPDU may also contain an A-MSDU frame, in which case the size may be much larger than the MTU limit. Since the maximum size of an A-MSDU depends on the PHY mode of the transmitting STA, it is not possible to set an exact MTU limit for a monitor interface. Now the maximum MTU for a monitor interface is unrestricted. Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Link: https://lore.kernel.org/r/20210628123246.2070558-1-johan.almbladh@anyfinetworks.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: Switch to a virtual time-based airtime schedulerToke Høiland-Jørgensen
This switches the airtime scheduler in mac80211 to use a virtual time-based scheduler instead of the round-robin scheduler used before. This has a couple of advantages: - No need to sync up the round-robin scheduler in firmware/hardware with the round-robin airtime scheduler. - If several stations are eligible for transmission we can schedule both of them; no need to hard-block the scheduling rotation until the head of the queue has used up its quantum. - The check of whether a station is eligible for transmission becomes simpler (in ieee80211_txq_may_transmit()). The drawback is that scheduling becomes slightly more expensive, as we need to maintain an rbtree of TXQs sorted by virtual time. This means that ieee80211_register_airtime() becomes O(logN) in the number of currently scheduled TXQs because it can change the order of the scheduled stations. We mitigate this overhead by only resorting when a station changes position in the tree, and hopefully N rarely grows too big (it's only TXQs currently backlogged, not all associated stations), so it shouldn't be too big of an issue. To prevent divisions in the fast path, we maintain both station sums and pre-computed reciprocals of the sums. This turns the fast-path operation into a multiplication, with divisions only happening as the number of active stations change (to re-compute the current sum of all active station weights). To prevent this re-computation of the reciprocal from happening too frequently, we use a time-based notion of station activity, instead of updating the weight every time a station gets scheduled or de-scheduled. As queues can oscillate between empty and occupied quite frequently, this can significantly cut down on the number of re-computations. It also has the added benefit of making the station airtime calculation independent on whether the queue happened to have drained at the time an airtime value was accounted. Co-developed-by: Yibo Zhao <yiboz@codeaurora.org> Signed-off-by: Yibo Zhao <yiboz@codeaurora.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20210623134755.235545-1-toke@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: use sdata->skb_queue for TDLSJohannes Berg
We need to differentiate these frames since the ones we currently put on the skb_queue_tdls_chsw have already been converted to ethernet format, but now that we've got a single place to enqueue to the sdata->skb_queue this isn't hard. Just differentiate based on protocol and adjust the code to queue the SKBs appropriately. Link: https://lore.kernel.org/r/20210517230754.17034990abef.I5342f2183c0d246b18d36c511eb3b6be298a6572@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-23mac80211: refactor SKB queue processing a bitJohannes Berg
This is a very long loop body, move it into its own function instead, keeping only the kcov and free outside in the loop body. Link: https://lore.kernel.org/r/20210517230754.6bc6cdd68570.I28a86ebdb19601ca1965c4dc654cc49fc1064efa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-10 00:20:32 +0000