summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)Author
2013-11-25mac80211: add generic cipher scheme supportMax Stepanov
This adds generic cipher scheme support to mac80211, such schemes are fully under control by the driver. On hw registration drivers may specify additional HW ciphers with a scheme how these ciphers have to be handled by mac80211 TX/RR. A cipher scheme specifies a cipher suite value, a size of the security header to be added to or stripped from frames and how the PN is to be verified on RX. Signed-off-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211/mac80211: DFS setup chandef for cac eventJanusz Dziedzic
To report channel width correctly we have to send correct channel parameters from mac80211 when calling cfg80211_cac_event(). This is required in case of using channel width higher than 20MHz and we have to set correct dfs channel state after CAC (NL80211_DFS_AVAILABLE). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: verify ieee80211_key_replace() argumentsJohannes Berg
There's no code calling ieee80211_key_replace() with both arguments NULL and it wouldn't make sense, but in the interest of maintainability add a warning for it. As a side effect, this also shuts up a smatch warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: remove useless tests for arrayJohannes Berg
Coverity points out that checking assoc_data->ie is completely useless since it's an array in the struct and can't be NULL - remove the useless checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: clean up mesh local link ID generationThomas Pedersen
802.11-2012 13.3.1 implicitly limits the mesh local link ID range to that of AID, since for mesh PS the local link ID must be indicated in the TIM IE, which only holds IEEE80211_MAX_AID bits. Also the code was allowing a local link ID of 0, but this is not correct since that TIM bit is used for indicating buffered mcast frames. Generate a random, unique, link ID from 1 - 2007, and drop a modulo conversion for the local link ID, but keep it for the peer link ID in case he chose something > MAX_AID. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: factor out plink event gatheringThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: factor out peering FSMThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> [fix some indentation, squash llid assignment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: assign sta plid earlyThomas Pedersen
If we store the peer link ID right after initializing a new neighbor, there is no need to do it later in the peering FSM. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: consolidate rcu unlocks in plink frame rxThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: factor peering frame processing into own functionThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: remove unused mesh_mgmt_ies_add() prototypeBob Copeland
Said function was removed some time ago. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: return -ENOMEM in mesh_plink_frame_txBob Copeland
All other paths return an error code, do the same here. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh_plink: don't ignore holding timerBob Copeland
The ignore_plink_timer flag is set when doing mod_timer() if the timer was not previously active. This is to avoid executing the timeout if del_timer() was subsequently called. However, del_timer() only happens if we are moving to ESTAB state or get a close frame while in HOLDING. We cannot leave HOLDING and re-enter ESTAB unless we receive a close frame (in which case ignore_plink_timer is already set) or if the timeout expires, so there actually isn't a case where this is needed on mod_timer(). Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh_plink: collapse the two switch statements togetherBob Copeland
The matches_local check can just be done when looking at the individual action types. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh: rewrite rssi_threshold_check in CBob Copeland
Use C instead of cpp for type checking. Also swap the arguments into the usual sdata -> sta order. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh_plink: group basic fitness checksBob Copeland
The initial frame checks differ depending on whether this is a new peer or not, but they were all intermixed with sta checks as necessary. Group them together so the two cases are clearer. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh: factor out common plink close/estab codeBob Copeland
Reject and accepted close events always put the host in the holding state and compute a reason code based only on the current state. Likewise on establish we always do the same setup. Put these in functions to save some duplicated code. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: hold sta->lock across plink switch statementsBob Copeland
Rather than unlock at the end of each case, do it once after all is said and done. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: consolidate calls to plink_frame_txThomas Pedersen
Do all frame transfers in one place at the end of the big switch statements. sta->plid and sta->reason can be passed in any case, since they are only used for the frames that need them. Remove assignments to locals for values already stored in the sta structure. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix off-by-one in llid check.Bob Copeland
According to IEEE 802.11-2012 (8.4.2.104), no peering management element exists with length 7. This code is checking to see if llid is present to ignore close frames with different llid, which would be IEs with length 8. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: do not compute offset from ssn in Rx AMPDU reordering bufferKarl Beldan
Currently, frames that go into the reordering buffer are stored at index ieee80211_sn_sub(sn, tid_rx->ssn) % tid_rx->buf_size. The offset calculation to the starting sequence number (SSN) is useless and just adds overhead so simply use sn % tid_rx->buf_size. This means the reordering buffer will start to be filled somewhere in the middle (at SSN % buf_size) and continue to get used from there, but there's no reason to start from the beginning. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: set hw initial idle stateKarl Beldan
ATM, the first call of ieee80211_do_open will configure the hw as non-idle, even if the interface being brought up is not a monitor, and this leads to inconsistent sequences like: register_hw() do_open(sta) hw_config(non-idle) (.. sta is non-idle ..) scan(sta) hw_config(idle) (after scan finishes) do_stop(sta) do_open(sta) (.. sta is idle ..) Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use capped prob when computing throughputsKarl Beldan
Commit 3e8b1eb "mac80211/minstrel_ht: improve rate selection stability" introduced a local capped prob in minstrel_ht_calc_tp but omitted to use it to compute the per rate throughput. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix connection pollingEliad Peller
Commit 392b9ff ("mac80211: change beacon/connection polling") removed the IEEE80211_STA_BEACON_POLL flag. However, it accidentally removed the setting of IEEE80211_STA_CONNECTION_POLL, making the connection polling completely useless (the flag is always clear, so the result is never being checked). Fix it. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix the mesh channel switch supportChun-Yeow Yeoh
Mesh STA receiving the mesh CSA action frame is not able to trigger the mesh channel switch due to the incorrect handling and comparison of mesh channel switch parameters element (MCSP)'s TTL. Make sure the MCSP's TTL is updated accordingly before calling the ieee80211_mesh_process_chnswitch. Also, we update the beacon before forwarding the CSA action frame, so MCSP's precedence value and initiator flag need to be updated prior to this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: don't attempt to reorder multicast framesJohannes Berg
Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Cc: stable@vger.kernel.org Reported-by: Blaise Gassend <blaise@suitabletech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrel_ht: fix rates selectionKarl Beldan
When initializing rates selections starting indexes upon stats update, the minstrel_sta->max_* rates should be 'group * MCS_GROUP_RATES + i' not 'i'. This affects settings where one of the peers does not support any of the rates of the group 0 (i.e. when ht_cap.mcs.rx_mask[0] == 0). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix for mesh beacon update on powersaveJavier Lopez
Mesh beacon was not being rebuild after user triggered a mesh powersave change. To solve this issue use ieee80211_mbss_info_change_notify instead of ieee80211_bss_info_change_notify. This helper function forces mesh beacon to be rebuild and then notifies the driver about the beacon change. Signed-off-by: Javier Lopez <jlopex@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix crash when using AP VLAN interfacesFelix Fietkau
Commit "mac80211: implement SMPS for AP" applies to AP_VLAN as well. It assumes that sta->sdata->vif.bss_conf.bssid is present, which did not get set for AP_VLAN. Initialize it to sdata->vif.addr like for other interface types. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix scheduled scan rtnl deadlockJohannes Berg
When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Cc: stable@vger.kernel.org Fixes: 5fe231e87372 ("cfg80211: vastly simplify locking") Reported-and-tested-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: DFS setup chandef for radar_event correctlyJanusz Dziedzic
Setup chandef for radar event correctly, before we will clear this in ieee80211_dfs_cac_cancel() function. Without this patch mac80211 will report wrong channel width in case we will get radar event during active CAC. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25Revert "mac80211: allow disable power save in mesh"Bob Copeland
This reverts commit ee1f668136b2fb6640ee2d54c2a525ea41f98211. The aformentioned commit added a check to allow 'iw wlan0 set power_save off' to work for mesh interfaces. However, this is problematic because it also allows 'iw wlan0 set power_save on', which will crash in short order because all of the subsequent code manipulates sdata->u.mgd. The power-saving states for mesh interfaces can be manipulated through the mesh config, e.g: 'iw wlan0 set mesh_param mesh_power_save=active' (which, despite the name, actualy disables power saving since the setting refers to the type of sleep the interface undergoes). Cc: stable@vger.kernel.org Fixes: ee1f668136b2 ("mac80211: allow disable power save in mesh") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: net/wireless/reg.c
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-28mac80211: fix uninitialized variableMichal Kazior
CSA completion could call in a driver bss_info_changed() with a garbled `changed` flag leading to all sorts of problems. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process mesh channel switching using beaconChun-Yeow Yeoh
Trigger the mesh channel switching procedure if the mesh STA happens to miss the CSA action frame but able to receive the beacon containing the CSA and MCSP elements from its peer mesh STAs. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> [fix locking in ieee80211_mesh_process_chnswitch()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: implement mesh channel switch userspace APIChun-Yeow Yeoh
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: enable the triggering of CSA frame in meshChun-Yeow Yeoh
Allow the triggering of CSA frame using mesh interface. The rules are more or less same with IBSS, such as not allowed to change between the band and channel width has to be same from the previous mode. Also, move the ieee80211_send_action_csa to a common space so that it can be re-used by mesh interface. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process the CSA frame for mesh accordinglyChun-Yeow Yeoh
Process the CSA frame according to the procedures define in IEEE Std 802.11-2012 section 10.9.8.4.3 as follow: * The mesh channel switch parameters element (MCSP) must be availabe. * If the MCSP's TTL is 1, drop the frame but still process the CSA. * If the MCSP's precedence value is less than or equal to the current precedence value, drop the frame and do not process the CSA. * The CSA frame is forwarded after TTL is decremented by 1 and the initiator field is set to 0. Transmit restrict field and others are maintained as is. * No beacon or probe response frame are handled here. Also, introduce the debug message used for mesh CSA purpose. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: refactor the parsing of chan switch ieChun-Yeow Yeoh
Refactor the channel switch IE parsing to reduce the number of function parameters. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add ieee80211_tx_prepare_skb() helper functionFelix Fietkau
This can be used by a driver to prepare skbs for transmission, which were obtained via functions such as ieee80211_probereq_get or ieee80211_nullfunc_get. This is useful for drivers that want to send those frames directly, but need rate control information to be prepared first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: fixes for mesh powersave logicMarco Porsch
This patch fixes errors in the mesh powersave logic which cause that remote peers do not get peer power mode change notifications and mesh peer service periods (MPSPs) got stuck. When closing a peer link, set the (now invalid) peer-specific power mode to 'unknown'. Avoid overhead when local power mode is unchanged. Reliably clear MPSP flags on peering status update. Avoid MPSP flags getting stuck by not requesting a further MPSP ownership if we already are an MPSP owner. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: Remove check for offchannel state when waking netdev queuesSeth Forshee
6c17b77b67587b9f9e3070fb89fe98cef3187131 ensures that a device's mac80211 queues will remain stopped while offchannel. Since the vif can no longer be offchannel when the queues wake it's not necessary to check for this before waking its netdev queues. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: enable DFS for IBSS modeSimon Wunderlich
Allow changing to DFS channels if the channel is available for beaconing and userspace controls DFS operation. Channel switch announcement from other stations on DFS channels will be interpreted as radar event. These channels will then be marked as unvailable. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: implement SMPS for APEmmanuel Grumbach
When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19net: misc: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 09:50:15 +0000