| Age | Commit message (Collapse) | Author |
|---|
|
Clean up: I'm about to use the rl_free field for purposes other than
a free list. So use a more generic name.
This is a refactoring change only.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There are rare cases where an rpcrdma_req can be re-used (via
rpcrdma_buffer_put) while the RPC reply handler is still running.
This is due to a signal firing at just the wrong instant.
Since commit 9d6b04097882 ("xprtrdma: Place registered MWs on a
per-req list"), rpcrdma_mws are self-contained; ie., they fully
describe an MR and scatterlist, and no part of that information is
stored in struct rpcrdma_req.
As part of closing the above race window, pass only the req's list
of registered MRs to ro_unmap_sync, rather than the rpcrdma_req
itself.
Some extra transport header sanity checking is removed. Since the
client depends on its own recollection of what memory had been
registered, there doesn't seem to be a way to abuse this change.
And, the check was not terribly effective. If the client had sent
Read chunks, the "list_empty" test is negative in both of the
removed cases, which are actually looking for Write or Reply
chunks.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
There are rare cases where an rpcrdma_req and its matched
rpcrdma_rep can be re-used, via rpcrdma_buffer_put, while the RPC
reply handler is still using that req. This is typically due to a
signal firing at just the wrong instant.
As part of closing this race window, avoid using the wrong
rpcrdma_rep to detect remotely invalidated MRs. Mark MRs as
invalidated while we are sure the rep is still OK to use.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=305
Fixes: 68791649a725 ('xprtrdma: Invalidate in the RPC reply ... ')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Callers assume the ro_unmap_sync and ro_unmap_safe methods empty
the list of registered MRs. Ensure that all paths through
fmr_op_unmap_sync() remove MWs from that list.
Fixes: 9d6b04097882 ("xprtrdma: Place registered MWs on a ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The current check will always be true and will always jump to
err1, this looks dubious to me. I believe && should be used
instead of ||.
Detected by CoverityScan, CID#1450120 ("Logically Dead Code")
Fixes: 107c1d0a991a ("svcrdma: Avoid Send Queue overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: No need to save the I/O direction. The functions that
release svc_rdma_chunk_ctxt already know what direction to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Use offset_in_page() macro instead of open-coding.
Reported-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Registration mode details are now handled by the rdma_rw
API, and thus can be removed from svcrdma.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
There's no longer a need to compare each SGE's lkey with the PD's
local_dma_lkey. Now that FRWR is gone, all DMA mappings are for
pages that were registered with this key.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Now that the svc_rdma_recvfrom path uses the rdma_rw API,
the details of Read sink buffer registration are dealt with by the
kernel's RDMA core. This cache is no longer used, and can be
removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up:
The generic RDMA R/W API conversion of svc_rdma_recvfrom replaced
the Register, Read, and Invalidate completion handlers. Remove the
old ones, which are no longer used.
These handlers shared some helper code with svc_rdma_wc_send. Fold
the wc_common helper back into the one remaining completion handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
When an RPC-over-RDMA request is received, the Receive buffer
contains a Transport Header possibly followed by an RPC message.
Even though rq_arg.head[0] (as passed to NFSD) does not contain the
Transport Header header, currently rq_arg.len includes the size of
the Transport Header.
That violates the intent of the xdr_buf API contract. .buflen should
include everything, but .len should be exactly the length of the RPC
message in the buffer.
The rq_arg fields are summed together at the end of
svc_rdma_recvfrom to obtain the correct return value. rq_arg.len
really ought to contain the correct number of bytes already, but it
currently doesn't due to the above misbehavior.
Let's instead ensure that .buflen includes the length of the
transport header, and that .len is always equal to head.iov_len +
.page_len + tail.iov_len .
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The current svcrdma recvfrom code path has a lot of detail about
registration mode and the type of port (iWARP, IB, etc).
Instead, use the RDMA core's generic R/W API. This shares code with
other RDMA-enabled ULPs that manages the gory details of buffer
registration and the posting of RDMA Read Work Requests.
Since the Read list marshaling code is being replaced, I took the
opportunity to replace C structure-based XDR encoding code with more
portable code that uses pointer arithmetic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
svc_rdma_rw.c already contains helpers for the sendto path.
Introduce helpers for the recvfrom path.
The plan is to replace the local NFSD bespoke code that constructs
and posts RDMA Read Work Requests with calls to the rdma_rw API.
This shares code with other RDMA-enabled ULPs that manages the gory
details of buffer registration and posting Work Requests.
This new code also puts all RDMA_NOMSG-specific logic in one place.
Lastly, the use of rqstp->rq_arg.pages is deprecated in favor of
using rqstp->rq_pages directly, for clarity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
>From what I can tell, calling ->recvfrom when there is no work to do
is a normal part of operation. This is the only way svc_recv can
tell when there is no more data ready to receive on the transport.
Neither the TCP nor the UDP transport implementations have a
"starve" metric.
The cost of receive starvation accounting is bumping an atomic, which
results in extra (IMO unnecessary) bus traffic between CPU sockets,
while holding a spin lock.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Ensure that segment lengths are not crazy.
- Ensure that the Reply chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Write
chunk, since this implementation does not support more than one per
message.
- Ensure that segment lengths are not crazy.
- Ensure that the chunk's segment count is not crazy.
With a 1KB inline threshold, the largest number of Write segments
that can be conveyed is about 60 (for a RDMA_NOMSG Reply message).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Identify malformed transport headers and unsupported chunk
combinations as early as possible.
- Reject RPC-over-RDMA messages that contain more than one Read chunk,
since this implementation currently does not support more than one
per RPC transaction.
- Ensure that segment lengths are not crazy.
- Remove the segment count check. With a 1KB inline threshold, the
largest number of Read segments that can be conveyed is about 40
(for a RDMA_NOMSG Call message). This is nowhere near
RPCSVC_MAXPAGES. As far as I can tell, that was just a sanity
check and does not enforce an implementation limit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
svc_rdma_marshal.c has one remaining exported function --
svc_rdma_xdr_decode_req -- and it has a single call site. Take
the same approach as the sendto path, and move this function
into the source file where it is called.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Sanity case: Catch the case where more Work Requests are being
posted to the Send Queue than there are Send Queue Entries.
This might happen if a client sends a chunk with more segments than
there are SQEs for the transport. The server can't send that reply,
so the transport will deadlock unless the client drops the RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The server displays "svcrdma: failed to post Send WR (-107)" in the
kernel log when the client disconnects. This could flood the server's
log, so remove the message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
xprt_rdma_bc_setup()
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
|
|
Clean up: These have been replaced and are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
req_maps are no longer used by the send path and can thus be removed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up. All RDMA Write completions are now handled by
svc_rdma_wc_write_ctx.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The sge array in struct svc_rdma_op_ctxt is no longer used for
sending RDMA Write WRs. It need only accommodate the construction of
Send and Receive WRs. The maximum inline size is the largest payload
it needs to handle now.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Replace C structure-based XDR decoding with pointer arithmetic.
Pointer arithmetic is considered more portable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Observed at Connectathon 2017.
If a client has underestimated the size of a Write or Reply chunk,
the Linux server writes as much payload data as it can, then it
recognizes there was a problem and closes the connection without
sending the transport header.
This creates a couple of problems:
<> The client never receives indication of the server-side failure,
so it continues to retransmit the bad RPC. Forward progress on
the transport is blocked.
<> The reply payload pages are not moved out of the svc_rqst, thus
they can be released by the RPC server before the RDMA Writes
have completed.
The new rdma_rw-ized helpers return a distinct error code when a
Write/Reply chunk overrun occurs, so it's now easy for the caller
(svc_rdma_sendto) to recognize this case.
Instead of dropping the connection, post an RDMA_ERROR message. The
client now sees an RDMA_ERROR and can properly terminate the RPC
transaction.
As part of the new logic, set up the same delayed release for these
payload pages as would have occurred in the normal case.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Now that svc_rdma_sendto has been renovated, svc_rdma_send_error can
be refactored to reduce code duplication and remove C structure-
based XDR encoding. It is also relocated to the source file that
contains its only caller.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The current svcrdma sendto code path posts one RDMA Write WR at a
time. Each of these Writes typically carries a small number of pages
(for instance, up to 30 pages for mlx4 devices). That means a 1MB
NFS READ reply requires 9 ib_post_send() calls for the Write WRs,
and one for the Send WR carrying the actual RPC Reply message.
Instead, use the new rdma_rw API. The details of Write WR chain
construction and memory registration are taken care of in the RDMA
core. svcrdma can focus on the details of the RPC-over-RDMA
protocol. This gives three main benefits:
1. All Write WRs for one RDMA segment are posted in a single chain.
As few as one ib_post_send() for each Write chunk.
2. The Write path can now use FRWR to register the Write buffers.
If the device's maximum page list depth is large, this means a
single Write WR is needed for each RPC's Write chunk data.
3. The new code introduces support for RPCs that carry both a Write
list and a Reply chunk. This combination can be used for an NFSv4
READ where the data payload is large, and thus is removed from the
Payload Stream, but the Payload Stream is still larger than the
inline threshold.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The plan is to replace the local bespoke code that constructs and
posts RDMA Read and Write Work Requests with calls to the rdma_rw
API. This shares code with other RDMA-enabled ULPs that manages the
gory details of buffer registration and posting Work Requests.
Some design notes:
o The structure of RPC-over-RDMA transport headers is flexible,
allowing multiple segments per Reply with arbitrary alignment,
each with a unique R_key. Write and Send WRs continue to be
built and posted in separate code paths. However, one whole
chunk (with one or more RDMA segments apiece) gets exactly
one ib_post_send and one work completion.
o svc_xprt reference counting is modified, since a chain of
rdma_rw_ctx structs generates one completion, no matter how
many Write WRs are posted.
o The current code builds the transport header as it is construct-
ing Write WRs. I've replaced that with marshaling of transport
header data items in a separate step. This is because the exact
structure of client-provided segments may not align with the
components of the server's reply xdr_buf, or the pages in the
page list. Thus parts of each client-provided segment may be
written at different points in the send path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Replace C structure-based XDR decoding with more portable code that
instead uses pointer arithmetic.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: extract the logic to save pages under I/O into a helper to
add a big documenting comment without adding clutter in the send
path.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
The Send Queue depth is temporarily reduced to 1 SQE per credit. The
new rdma_rw API does an internal computation, during QP creation, to
increase the depth of the Send Queue to handle RDMA Read and Write
operations.
This change has to come before the NFSD code paths are updated to
use the rdma_rw API. Without this patch, rdma_rw_init_qp() increases
the size of the SQ too much, resulting in memory allocation failures
during QP creation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Introduce a helper to DMA-map a reply's transport header before
sending it. This will in part replace the map vector cache.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Clean up: Move the ib_send_wr off the stack, and move common code
to post a Send Work Request into a helper.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Since commit 1e465fd4ff47 ("xprtrdma: Replace send and receive
arrays"), this field is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When ro_map is out of buffers, that's not a permanent error, so
don't report a problem.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Micro-optimize the receive workqueue by marking it's anchor "read-
mostly."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Device removal is now adequately supported. Pinning the underlying
device driver to prevent removal while an NFS mount is active is no
longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
After a device removal, enable the transport connect worker to
restore normal operation if there is another device with
connectivity to the server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
I'm about to add another arm to
if (ep->rep_connected != 0)
It will be cleaner to use a switch statement here. We'll be looking
for a couple of specific errnos, or "anything else," basically to
sort out the difference between a normal reconnect and recovery from
device removal.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The device driver for the underlying physical device associated
with an RPC-over-RDMA transport can be removed while RPC-over-RDMA
transports are still in use (ie, while NFS filesystems are still
mounted and active). The IB core performs a connection event upcall
to request that consumers free all RDMA resources associated with
a transport.
There may be pending RPCs when this occurs. Care must be taken to
release associated resources without leaving references that can
trigger a subsequent crash if a signal or soft timeout occurs. We
rely on the caller of the transport's ->close method to ensure that
the previous RPC task has invoked xprt_release but the transport
remains write-locked.
A DEVICE_REMOVE upcall forces a disconnect then sleeps. When ->close
is invoked, it destroys the transport's H/W resources, then wakes
the upcall, which completes and allows the core driver unload to
continue.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=266
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When the underlying device driver is reloaded, ia->ri_device will be
replaced. All cached copies of that device pointer have to be
updated as well.
Commit 54cbd6b0c6b9 ("xprtrdma: Delay DMA mapping Send and Receive
buffers") added the rg_device field to each regbuf. As part of
handling a device removal, rpcrdma_dma_unmap_regbuf is invoked on
all regbufs for a transport.
Simply calling rpcrdma_dma_map_regbuf for each Receive buffer after
the driver has been reloaded should reinitialize rg_device correctly
for every case except rpcrdma_wc_receive, which still uses
rpcrdma_rep::rr_device.
Ensure the same device that was used to map a Receive buffer is also
used to sync it in rpcrdma_wc_receive by using rg_device there
instead of rr_device.
This is the only use of rr_device, so it can be removed.
The use of regbufs in the send path is also updated, for
completeness.
Fixes: 54cbd6b0c6b9 ("xprtrdma: Delay DMA mapping Send and ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
In order to unload a device driver and reload it, xprtrdma will need
to close a transport's interface adapter, and then call
rpcrdma_ia_open again, possibly finding a different interface
adapter.
Make rpcrdma_ia_open safe to call on the same transport multiple
times.
This is a refactoring change only.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Current NFS clients rely on connection loss to determine when to
retransmit. In particular, for protocols like NFSv4, clients no
longer rely on RPC timeouts to drive retransmission: NFSv4 servers
are required to terminate a connection when they need a client to
retransmit pending RPCs.
When a server is no longer reachable, either because it has crashed
or because the network path has broken, the server cannot actively
terminate a connection. Thus NFS clients depend on transport-level
keepalive to determine when a connection must be replaced and
pending RPCs retransmitted.
However, RDMA RC connections do not have a native keepalive
mechanism. If an NFS/RDMA server crashes after a client has sent
RPCs successfully (an RC ACK has been received for all OTW RDMA
requests), there is no way for the client to know the connection is
moribund.
In addition, new RDMA requests are subject to the RPC-over-RDMA
credit limit. If the client has consumed all granted credits with
NFS traffic, it is not allowed to send another RDMA request until
the server replies. Thus it has no way to send a true keepalive when
the workload has already consumed all credits with pending RPCs.
To address this, forcibly disconnect a transport when an RPC times
out. This prevents moribund connections from stopping the
detection of failover or other configuration changes on the server.
Note that even if the connection is still good, retransmitting
any RPC will trigger a disconnect thanks to this logic in
xprt_rdma_send_request:
/* Must suppress retransmit to maintain credits */
if (req->rl_connect_cookie == xprt->connect_cookie)
goto drop_connection;
req->rl_connect_cookie = xprt->connect_cookie;
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Trying to create MRs while the transport is being torn down can
cause a crash.
Fixes: e2ac236c0b65 ("xprtrdma: Allocate MRs on demand")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull nfsd fixes from Bruce Fields:
"The restriction of NFSv4 to TCP went overboard and also broke the
backchannel; fix.
Also some minor refinements to the nfsd version-setting interface that
we'd like to get fixed before release"
* tag 'nfsd-4.11-1' of git://linux-nfs.org/~bfields/linux:
svcrdma: set XPT_CONG_CTRL flag for bc xprt
NFSD: fix nfsd_reset_versions for NFSv4.
NFSD: fix nfsd_minorversion(.., NFSD_AVAIL)
NFSD: further refinement of content of /proc/fs/nfsd/versions
nfsd: map the ENOKEY to nfserr_perm for avoiding warning
SUNRPC/backchanel: set XPT_CONG_CTRL flag for bc xprt
|
|
Same change as Kinglong Mee's fix for the TCP backchannel service.
Fixes: 5283b03ee5cd ("nfs/nfsd/sunrpc: enforce transport...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
