summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2018-02-26l2tp: fix race in pppol2tp_release with session object destroyJames Chapman
pppol2tp_release uses call_rcu to put the final ref on its socket. But the session object doesn't hold a ref on the session socket so may be freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by having the session hold a ref on its socket until the session is destroyed. It is this ref that is dropped via call_rcu. Sessions are also deleted via l2tp_tunnel_closeall. This must now also put the final ref via call_rcu. So move the call_rcu call site into pppol2tp_session_close so that this happens in both destroy paths. A common destroy path should really be implemented, perhaps with l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release does, but this will be looked at later. ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 Modules linked in: CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:debug_print_object+0x166/0x220 RSP: 0018:ffff880013647a00 EFLAGS: 00010082 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0 RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0 Call Trace: debug_object_activate+0x38b/0x530 ? debug_object_assert_init+0x3b0/0x3b0 ? __mutex_unlock_slowpath+0x85/0x8b0 ? pppol2tp_session_destruct+0x110/0x110 __call_rcu.constprop.66+0x39/0x890 ? __call_rcu.constprop.66+0x39/0x890 call_rcu_sched+0x17/0x20 pppol2tp_release+0x2c7/0x440 ? fcntl_setlk+0xca0/0xca0 ? sock_alloc_file+0x340/0x340 sock_release+0x92/0x1e0 sock_close+0x1b/0x20 __fput+0x296/0x6e0 ____fput+0x1a/0x20 task_work_run+0x127/0x1a0 do_exit+0x7f9/0x2ce0 ? SYSC_connect+0x212/0x310 ? mm_update_next_owner+0x690/0x690 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 do_group_exit+0x10d/0x330 ? do_group_exit+0x330/0x330 SyS_exit_group+0x22/0x30 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f362e471259 RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259 RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000 RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000 Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e 8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix races with tunnel socket closeJames Chapman
The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: don't use inet_shutdown on ppp session destroyJames Chapman
Previously, if a ppp session was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our session will be detached anyway). BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0 Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296 CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x101/0x157 ? inet_shutdown+0x5d/0x1c0 print_address_description+0x78/0x260 ? inet_shutdown+0x5d/0x1c0 kasan_report+0x240/0x360 __asan_load4+0x78/0x80 inet_shutdown+0x5d/0x1c0 ? pppol2tp_show+0x80/0x80 pppol2tp_session_close+0x68/0xb0 l2tp_tunnel_closeall+0x199/0x210 ? udp_v6_flush_pending_frames+0x90/0x90 l2tp_udp_encap_destroy+0x6b/0xc0 ? l2tp_tunnel_del_work+0x2e0/0x2e0 udpv6_destroy_sock+0x8c/0x90 sk_common_release+0x47/0x190 udp_lib_close+0x15/0x20 inet_release+0x85/0xd0 inet6_release+0x43/0x60 sock_release+0x53/0x100 ? sock_alloc_file+0x260/0x260 sock_close+0x1b/0x20 __fput+0x19f/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7fe240a45259 RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259 RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5 RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000 R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000 R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040 Allocated by task 8331: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x144/0x3e0 sock_alloc_inode+0x22/0x130 alloc_inode+0x3d/0xf0 new_inode_pseudo+0x1c/0x90 sock_alloc+0x30/0x110 __sock_create+0xaa/0x4c0 SyS_socket+0xbe/0x130 do_syscall_64+0x128/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Freed by task 8314: save_stack+0x43/0xd0 __kasan_slab_free+0x11a/0x170 kasan_slab_free+0xe/0x10 kmem_cache_free+0x88/0x2b0 sock_destroy_inode+0x49/0x50 destroy_inode+0x77/0xb0 evict+0x285/0x340 iput+0x429/0x530 dentry_unlink_inode+0x28c/0x2c0 __dentry_kill+0x1e3/0x2f0 dput.part.21+0x500/0x560 dput+0x24/0x30 __fput+0x2aa/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: don't use inet_shutdown on tunnel destroyJames Chapman
Previously, if a tunnel was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our tunnel will be detached anyway). BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: __lock_acquire+0x263/0x1630 PGD 0 P4D 0 Oops: 0000 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129 Workqueue: l2tp l2tp_tunnel_del_work RIP: 0010:__lock_acquire+0x263/0x1630 RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0 R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0 Call Trace: ? __lock_acquire+0xc77/0x1630 ? console_trylock+0x11/0xa0 lock_acquire+0x117/0x230 ? lock_sock_nested+0x3a/0xa0 _raw_spin_lock_bh+0x3a/0x50 ? lock_sock_nested+0x3a/0xa0 lock_sock_nested+0x3a/0xa0 inet_shutdown+0x33/0xf0 l2tp_tunnel_del_work+0x60/0xef process_one_work+0x1ea/0x5f0 ? process_one_work+0x162/0x5f0 worker_thread+0x48/0x3e0 ? trace_hardirqs_on+0xd/0x10 kthread+0x108/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_stop+0x2a0/0x2a0 ret_from_fork+0x24/0x30 Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85 68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c 24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70 CR2: 00000000000000a0 Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26libceph, ceph: avoid memory leak when specifying same option several timesChengguang Xu
When parsing string option, in order to avoid memory leak we need to carefully free it first in case of specifying same option several times. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-02-25netfilter: use skb_to_full_sk in ip6_route_me_harderEric Dumazet
For some reason, Florian forgot to apply to ip6_route_me_harder the fix that went in commit 29e09229d9f2 ("netfilter: use skb_to_full_sk in ip_route_me_harder") Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")  Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25batman-adv: Fix internal interface indices typesSven Eckelmann
batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25netfilter: don't set F_IFACE on ipv6 fib lookupsFlorian Westphal
"fib" starts to behave strangely when an ipv6 default route is added - the FIB lookup returns a route using 'oif' in this case. This behaviour was inherited from ip6tables rpfilter so change this as well. Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1221 Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: increase IPSTATS_MIB_CSUMERRORS statTaehee Yoo
In the ip_rcv, IPSTATS_MIB_CSUMERRORS is increased when checksum error is occurred. bridge netfilter routine should increase IPSTATS_MIB_CSUMERRORS. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25batman-adv: Fix netlink dumping of BLA backbonesSven Eckelmann
The function batadv_bla_backbone_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: ea4152e11716 ("batman-adv: add backbone table netlink support") Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Fix netlink dumping of BLA claimsSven Eckelmann
The function batadv_bla_claim_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: 04f3f5bf1883 ("batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlink") Reported-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Ignore invalid batadv_v_gw during netlink sendSven Eckelmann
The function batadv_v_gw_dump stops the processing loop when batadv_v_gw_dump_entry returns a non-0 return code. This should only happen when the buffer is full. Otherwise, an empty message may be returned by batadv_gw_dump. This empty message will then stop the netlink dumping of gateway entries. At worst, not a single entry is returned to userspace even when plenty of possible gateways exist. Fixes: b71bb6f924fe ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: Ignore invalid batadv_iv_gw during netlink sendSven Eckelmann
The function batadv_iv_gw_dump stops the processing loop when batadv_iv_gw_dump_entry returns a non-0 return code. This should only happen when the buffer is full. Otherwise, an empty message may be returned by batadv_gw_dump. This empty message will then stop the netlink dumping of gateway entries. At worst, not a single entry is returned to userspace even when plenty of possible gateways exist. Fixes: efb766af06e3 ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25netfilter: nf_flow_table: fix checksum when handling DNATFelix Fietkau
Add a missing call to csum_replace4 like on SNAT. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsetsFlorian Westphal
We need to make sure the offsets are not out of range of the total size. Also check that they are in ascending order. The WARN_ON triggered by syzkaller (it sets panic_on_warn) is changed to also bail out, no point in continuing parsing. Briefly tested with simple ruleset of -A INPUT --limit 1/s' --log plus jump to custom chains using 32bit ebtables binary. Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ebtables: convert BUG_ONs to WARN_ONsFlorian Westphal
All of these conditions are not fatal and should have been WARN_ONs from the get-go. Convert them to WARN_ONs and bail out. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: bridge: ebt_among: add missing match size checksFlorian Westphal
ebt_among is special, it has a dynamic match size and is exempt from the central size checks. Therefore it must check that the size of the match structure provided from userspace is sane by making sure em->match_size is at least the minimum size of the expected structure. The module has such a check, but its only done after accessing a structure that might be out of bounds. tested with: ebtables -A INPUT ... \ --among-dst fe:fe:fe:fe:fe:fe --among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pktFlorian Westphal
l4proto->manip_pkt() can cause reallocation of skb head so pointer to the ipv6 header must be reloaded. Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com> Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ipt_CLUSTERIP: put config instead of freeing itFlorian Westphal
Once struct is added to per-netns list it becomes visible to other cpus, so we cannot use kfree(). Also delay setting entries refcount to 1 until after everything is initialised so that when we call clusterip_config_put() in this spot entries is still zero. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ipt_CLUSTERIP: put config struct if we can't increment ct refcountFlorian Westphal
This needs to put() the entry to avoid a resource leak in error path. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25batman-adv: invalidate checksum on fragment reassemblyMatthias Schiffer
A more sophisticated implementation could try to combine fragment checksums when all fragments have CHECKSUM_COMPLETE and are split at even offsets. For now, we just set ip_summed to CHECKSUM_NONE to avoid "hw csum failure" warnings in the kernel log when fragmented frames are received. In consequence, skb_pull_rcsum() can be replaced with skb_pull(). Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-25batman-adv: fix packet checksum in receive pathMatthias Schiffer
eth_type_trans() internally calls skb_pull(), which does not adjust the skb checksum; skb_postpull_rcsum() is necessary to avoid log spam of the form "bat0: hw csum failure" when packets with CHECKSUM_COMPLETE are received. Note that in usual setups, packets don't reach batman-adv with CHECKSUM_COMPLETE (I assume NICs bail out of checksumming when they see batadv's ethtype?), which is why the log messages do not occur on every system using batman-adv. I could reproduce this issue by stacking batman-adv on top of a VXLAN interface. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Tested-by: Maximilian Wilhelm <max@sdn.clinic> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-02-23net: fib_rules: Add new attribute to set protocolDonald Sharp
For ages iproute2 has used `struct rtmsg` as the ancillary header for FIB rules and in the process set the protocol value to RTPROT_BOOT. Until ca56209a66 ("net: Allow a rule to track originating protocol") the kernel rules code ignored the protocol value sent from userspace and always returned 0 in notifications. To avoid incompatibility with existing iproute2, send the protocol as a new attribute. Fixes: cac56209a66 ("net: Allow a rule to track originating protocol") Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23net_sched: gen_estimator: fix broken estimators based on percpu statsEric Dumazet
pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2018-02-22 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel. 2) cond_resched points in percpu array alloc/free paths, from Eric. 3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23rds: rds_msg_zcopy should return error of null rm->data.op_mmp_znotifierSowmini Varadhan
if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been specified, the rm->data.op_mmp_znotifier allocation will be skipped. In this case, it is invalid ot pass down a cmsghdr with RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this case. Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com Fixes: 0cebaccef3ac ("rds: zerocopy Tx support.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann
gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23mac80211: drop frames with unexpected DS bits from fast-rx to slow pathFelix Fietkau
Fixes rx for 4-addr packets in AP mode. These may be used for setting up a 4-addr link for stations that are allowed to do so. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-23mac80211: Adjust TSQ pacing shiftToke Høiland-Jørgensen
Since we now have the convenient helper to do so, actually adjust the TSQ pacing shift for packets going out over a WiFi interface. This significantly improves throughput for locally-originated TCP connections. The default pacing shift of 10 corresponds to ~1ms of queued packet data. Adjusting this to a shift of 8 (i.e. ~4ms) improves 1-hop throughput for ath9k by a factor of 3, whereas increasing it more has diminishing returns. Achieved throughput for different values of sk_pacing_shift (average of 5 iterations of 10-sec netperf runs to a host on the other side of the WiFi hop): sk_pacing_shift 10: 43.21 Mbps (pre-patch) sk_pacing_shift 9: 78.17 Mbps sk_pacing_shift 8: 123.94 Mbps sk_pacing_shift 7: 128.31 Mbps Latency for competing flows increases from ~3 ms to ~10 ms with this change. This is about the same magnitude of queueing latency induced by flows that are not originated on the WiFi device itself (and so are not limited by TSQ). Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22rxrpc: Fix send in rxrpc_send_data_packet()David Howells
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send both parts of the iov[] buffer, but one of them does not. Fix it so that it does. Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc header included, but no payload. Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22Merge tag 'mac80211-next-for-davem-2018-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates across wireless. One thing to note: I've included a new ethertype that wireless uses (ETH_P_PREAUTH) in if_ether.h. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22Merge tag 'mac80211-for-davem-2018-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes across the tree, the shortlog basically says it all: cfg80211: fix cfg80211_beacon_dup -> old bug in this code cfg80211: clear wep keys after disconnection -> certain ways of disconnecting left the keys mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 -> alignment issues with using 14 bytes mac80211: Do not disconnect on invalid operating class -> if the AP has a bogus operating class, let it be mac80211: Fix sending ADDBA response for an ongoing session -> don't send the same frame twice cfg80211: use only 1Mbps for basic rates in mesh -> interop issue with old versions of our code mac80211_hwsim: don't use WQ_MEM_RECLAIM -> it causes splats because it flushes work on a non-reclaim WQ regulatory: add NUL to request alpha2 -> nla_put_string() issue from Kees mac80211: mesh: fix wrong mesh TTL offset calculation -> protocol issue mac80211: fix a possible leak of station stats -> error path might leak memory mac80211: fix calling sleeping function in atomic context -> percpu allocations need to be made with gfp flags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22mac80211: Call mgd_prep_tx before transmitting deauthenticationIlan Peer
In multi channel scenarios, when disassociating from the AP before a beacon was heard from the AP, it is not guaranteed that the virtual interface is granted air time for the transmission of the deauthentication frame. This in turn can lead to various issues as the AP might never get the deauthentication frame. To mitigate such possible issues, add a HW flag indicating that the driver requires mac80211 to call the mgd_prep_tx() driver callback to make sure that the virtual interface is granted immediate airtime to be able to transmit the frame, in case that no beacon was heard from the AP. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22mac80211: add get TID helperSara Sharon
Extracting the TID from the QOS header is common enough to justify helper. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22mac80211: support reporting A-MPDU EOF bit value/knownJohannes Berg
Support getting the EOF bit value reported from hardware and writing it out to radiotap. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22net: ipv4: Set addr_type in hash_keys for forwarded caseDavid Ahern
The result of the skb flow dissect is copied from keys to hash_keys to ensure only the intended data is hashed. The original L4 hash patch overlooked setting the addr_type for this case; add it. Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice") Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22tcp_bbr: better deal with suboptimal GSOEric Dumazet
BBR uses tcp_tso_autosize() in an attempt to probe what would be the burst sizes and to adjust cwnd in bbr_target_cwnd() with following gold formula : /* Allow enough full-sized skbs in flight to utilize end systems. */ cwnd += 3 * bbr->tso_segs_goal; But GSO can be lacking or be constrained to very small units (ip link set dev ... gso_max_segs 2) What we really want is to have enough packets in flight so that both GSO and GRO are efficient. So in the case GSO is off or downgraded, we still want to have the same number of packets in flight as if GSO/TSO was fully operational, so that GRO can hopefully be working efficiently. To fix this issue, we make tcp_tso_autosize() unaware of sk->sk_gso_max_segs Only tcp_tso_segs() has to enforce the gso_max_segs limit. Tested: ethtool -K eth0 tso off gso off tc qd replace dev eth0 root pfifo_fast Before patch: for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done     691  (ss -temoi shows cwnd is stuck around 6 )     667     651     631     517 After patch : # for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done    1733 (ss -temoi shows cwnd is around 386 )    1778    1746    1781    1718 Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22netlink: put module reference if dump start failsJason A. Donenfeld
Before, if cb->start() failed, the module reference would never be put, because cb->cb_running is intentionally false at this point. Users are generally annoyed by this because they can no longer unload modules that leak references. Also, it may be possible to tediously wrap a reference counter back to zero, especially since module.c still uses atomic_inc instead of refcount_inc. This patch expands the error path to simply call module_put if cb->start() fails. Fixes: 41c87425a1ac ("netlink: do not set cb_running if dump's start() errs") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22bpf: clean up unused-variable warningArnd Bergmann
The only user of this variable is inside of an #ifdef, causing a warning without CONFIG_INET: net/core/filter.c: In function '____bpf_sock_ops_cb_flags_set': net/core/filter.c:3382:6: error: unused variable 'val' [-Werror=unused-variable] int val = argval & BPF_SOCK_OPS_ALL_CB_FLAGS; This replaces the #ifdef with a nicer IS_ENABLED() check that makes the code more readable and avoids the warning. Fixes: b13d88072172 ("bpf: Adds field bpf_sock_ops_cb_flags to tcp_sock") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-21net: Allow a rule to track originating protocolDonald Sharp
Allow a rule that is being added/deleted/modified or dumped to contain the originating protocol's id. The protocol is handled just like a routes originating protocol is. This is especially useful because there is starting to be a plethora of different user space programs adding rules. Allow the vrf device to specify that the kernel is the originator of the rule created for this device. Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains large batch with Netfilter fixes for your net tree, mostly due to syzbot report fixups and pr_err() ratelimiting, more specifically, they are: 1) Get rid of superfluous unnecessary check in x_tables before vmalloc(), we don't hit BUG there anymore, patch from Michal Hock, suggested by Andrew Morton. 2) Race condition in proc file creation in ipt_CLUSTERIP, from Cong Wang. 3) Drop socket lock that results in circular locking dependency, patch from Paolo Abeni. 4) Drop packet if case of malformed blob that makes backpointer jump in x_tables, from Florian Westphal. 5) Fix refcount leak due to race in ipt_CLUSTERIP in clusterip_config_find_get(), from Cong Wang. 6) Several patches to ratelimit pr_err() for x_tables since this can be a problem where CAP_NET_ADMIN semantics can protect us in untrusted namespace, from Florian Westphal. 7) Missing .gitignore update for new autogenerated asn1 state machine for the SNMP NAT helper, from Zhu Lingshan. 8) Missing timer initialization in xt_LED, from Paolo Abeni. 9) Do not allow negative port range in NAT, also from Paolo. 10) Lock imbalance in the xt_hashlimit rate match mode, patch from Eric Dumazet. 11) Initialize workqueue before timer in the idletimer match, from Eric Dumazet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21tcp: remove dead code after CHECKSUM_PARTIAL adoptionEric Dumazet
Since all skbs in write/rtx queues have CHECKSUM_PARTIAL, we can remove dead code. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21tcp: remove dead code from tcp_set_skb_tso_segs()Eric Dumazet
We no longer have skbs with skb->ip_summed == CHECKSUM_NONE in TCP write queues. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21tcp: tcp_sendmsg() only deals with CHECKSUM_PARTIALEric Dumazet
We no longer have skbs with skb->ip_summed == CHECKSUM_NONE in TCP write queues. We can remove dead code in tcp_sendmsg(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21tcp: remove sk_check_csum_caps()Eric Dumazet
Since TCP relies on GSO, we do not need this helper anymore. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21tcp: remove sk_can_gso() useEric Dumazet
After previous commit, sk_can_gso() is always true. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-21tcp: switch to GSO being always onEric Dumazet
Oleksandr Natalenko reported performance issues with BBR without FQ packet scheduler that were root caused to lack of SG and GSO/TSO on his configuration. In this mode, TCP internal pacing has to setup a high resolution timer for each MSS sent. We could implement in TCP a strategy similar to the one adopted in commit fefa569a9d4b ("net_sched: sch_fq: account for schedule/timers drifts") or decide to finally switch TCP stack to a GSO only mode. This has many benefits : 1) Most TCP developments are done with TSO in mind. 2) Less high-resolution timers needs to be armed for TCP-pacing 3) GSO can benefit of xmit_more hint 4) Receiver GRO is more effective (as if TSO was used for real on sender) -> Lower ACK traffic 5) Write queues have less overhead (one skb holds about 64KB of payload) 6) SACK coalescing just works. 7) rtx rb-tree contains less packets, SACK is cheaper. This patch implements the minimum patch, but we can remove some legacy code as follow ups. Tested: On 40Gbit link, one netperf -t TCP_STREAM BBR+fq: sg on: 26 Gbits/sec sg off: 15.7 Gbits/sec (was 2.3 Gbit before patch) BBR+pfifo_fast: sg on: 24.2 Gbits/sec sg off: 14.9 Gbits/sec (was 0.66 Gbit before patch !!! ) BBR+fq_codel: sg on: 24.4 Gbits/sec sg off: 15 Gbits/sec (was 0.66 Gbit before patch !!! ) Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-15 04:51:37 +0000