| Age | Commit message (Collapse) | Author |
|---|
|
There is networking hardware that isn't based on Ethernet for layers 1 and 2.
For example CAN.
CAN is a multi-master serial bus standard for connecting Electronic Control
Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes
of payload. Frame corruption is detected by a CRC. However frame loss due to
corruption is possible, but a quite unusual phenomenon.
While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of
legacy protocols on top of CAN, which are not build with flow control or high
CAN frame drop rates in mind.
When using fq_codel, as soon as the queue reaches a certain delay based length,
skbs from the head of the queue are silently dropped. Silently meaning that the
user space using a send() or similar syscall doesn't get an error. However
TCP's flow control algorithm will detect dropped packages and adjust the
bandwidth accordingly.
When using fq_codel and sending raw frames over CAN, which is the common use
case, the user space thinks the package has been sent without problems, because
send() returned without an error. pfifo_fast will drop skbs, if the queue
length exceeds the maximum. But with this scheduler the skbs at the tail are
dropped, an error (-ENOBUFS) is propagated to user space. So that the user
space can slow down the package generation.
On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH
during compile time, or set default during runtime with sysctl
net.core.default_qdisc (see [1]), we get a bad user experience. In my test case
with pfifo_fast, I can transfer thousands of million CAN frames without a frame
drop. On the other hand with fq_codel there is more then one lost CAN frame per
thousand frames.
As pointed out fq_codel is not suited for CAN hardware, so this patch changes
attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices.
During transition of a netdev from down to up state the default queuing
discipline is attached by attach_default_qdiscs() with the help of
attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to
attach the pfifo_fast (pfifo_fast_ops) if the network device type is
"ARPHRD_CAN".
[1] https://github.com/systemd/systemd/issues/9194
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes variables and callback these are related to the nested
device structure.
devices that can be nested have their own nest_level variable that
represents the depth of nested devices.
In the previous patch, new {lower/upper}_level variables are added and
they replace old private nest_level variable.
So, this patch removes all 'nest_level' variables.
In order to avoid lockdep warning, ->ndo_get_lock_subclass() was added
to get lockdep subclass value, which is actually lower nested depth value.
But now, they use the dynamic lockdep key to avoid lockdep warning instead
of the subclass.
So, this patch removes ->ndo_get_lock_subclass() callback.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to link an adjacent node, netdev_upper_dev_link() is used
and in order to unlink an adjacent node, netdev_upper_dev_unlink() is used.
unlink operation does not fail, but link operation can fail.
In order to exchange adjacent nodes, we should unlink an old adjacent
node first. then, link a new adjacent node.
If link operation is failed, we should link an old adjacent node again.
But this link operation can fail too.
It eventually breaks the adjacent link relationship.
This patch adds an ignore flag into the netdev_adjacent structure.
If this flag is set, netdev_upper_dev_link() ignores an old adjacent
node for a moment.
This patch also adds new functions for other modules.
netdev_adjacent_change_prepare()
netdev_adjacent_change_commit()
netdev_adjacent_change_abort()
netdev_adjacent_change_prepare() inserts new device into adjacent list
but new device is not allowed to use immediately.
If netdev_adjacent_change_prepare() fails, it internally rollbacks
adjacent list so that we don't need any other action.
netdev_adjacent_change_commit() deletes old device in the adjacent list
and allows new device to use.
netdev_adjacent_change_abort() rollbacks adjacent list.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some interface types could be nested.
(VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..)
These interface types should set lockdep class because, without lockdep
class key, lockdep always warn about unexisting circular locking.
In the current code, these interfaces have their own lockdep class keys and
these manage itself. So that there are so many duplicate code around the
/driver/net and /net/.
This patch adds new generic lockdep keys and some helper functions for it.
This patch does below changes.
a) Add lockdep class keys in struct net_device
- qdisc_running, xmit, addr_list, qdisc_busylock
- these keys are used as dynamic lockdep key.
b) When net_device is being allocated, lockdep keys are registered.
- alloc_netdev_mqs()
c) When net_device is being free'd llockdep keys are unregistered.
- free_netdev()
d) Add generic lockdep key helper function
- netdev_register_lockdep_key()
- netdev_unregister_lockdep_key()
- netdev_update_lockdep_key()
e) Remove unnecessary generic lockdep macro and functions
f) Remove unnecessary lockdep code of each interfaces.
After this patch, each interface modules don't need to maintain
their lockdep keys.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current code doesn't limit the number of nested devices.
Nested devices would be handled recursively and this needs huge stack
memory. So, unlimited nested devices could make stack overflow.
This patch adds upper_level and lower_level, they are common variables
and represent maximum lower/upper depth.
When upper/lower device is attached or dettached,
{lower/upper}_level are updated. and if maximum depth is bigger than 8,
attach routine fails and returns -EMLINK.
In addition, this patch converts recursive routine of
netdev_walk_all_{lower/upper} to iterator routine.
Test commands:
ip link add dummy0 type dummy
ip link add link dummy0 name vlan1 type vlan id 1
ip link set vlan1 up
for i in {2..55}
do
let A=$i-1
ip link add vlan$i link vlan$A type vlan id $i
done
ip link del dummy0
Splat looks like:
[ 155.513226][ T908] BUG: KASAN: use-after-free in __unwind_start+0x71/0x850
[ 155.514162][ T908] Write of size 88 at addr ffff8880608a6cc0 by task ip/908
[ 155.515048][ T908]
[ 155.515333][ T908] CPU: 0 PID: 908 Comm: ip Not tainted 5.4.0-rc3+ #96
[ 155.516147][ T908] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 155.517233][ T908] Call Trace:
[ 155.517627][ T908]
[ 155.517918][ T908] Allocated by task 0:
[ 155.518412][ T908] (stack is not available)
[ 155.518955][ T908]
[ 155.519228][ T908] Freed by task 0:
[ 155.519885][ T908] (stack is not available)
[ 155.520452][ T908]
[ 155.520729][ T908] The buggy address belongs to the object at ffff8880608a6ac0
[ 155.520729][ T908] which belongs to the cache names_cache of size 4096
[ 155.522387][ T908] The buggy address is located 512 bytes inside of
[ 155.522387][ T908] 4096-byte region [ffff8880608a6ac0, ffff8880608a7ac0)
[ 155.523920][ T908] The buggy address belongs to the page:
[ 155.524552][ T908] page:ffffea0001822800 refcount:1 mapcount:0 mapping:ffff88806c657cc0 index:0x0 compound_mapcount:0
[ 155.525836][ T908] flags: 0x100000000010200(slab|head)
[ 155.526445][ T908] raw: 0100000000010200 ffffea0001813808 ffffea0001a26c08 ffff88806c657cc0
[ 155.527424][ T908] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 155.528429][ T908] page dumped because: kasan: bad access detected
[ 155.529158][ T908]
[ 155.529410][ T908] Memory state around the buggy address:
[ 155.530060][ T908] ffff8880608a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 155.530971][ T908] ffff8880608a6c00: fb fb fb fb fb f1 f1 f1 f1 00 f2 f2 f2 f3 f3 f3
[ 155.531889][ T908] >ffff8880608a6c80: f3 fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 155.532806][ T908] ^
[ 155.533509][ T908] ffff8880608a6d00: fb fb fb fb fb fb fb fb fb f1 f1 f1 f1 00 00 00
[ 155.534436][ T908] ffff8880608a6d80: f2 f3 f3 f3 f3 fb fb fb 00 00 00 00 00 00 00 00
[ ... ]
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If copy_net_ns() failed after net_alloc(), net->key_domain is leaked.
Fix this, by freeing key_domain in error path.
syzbot report:
BUG: memory leak
unreferenced object 0xffff8881175007e0 (size 32):
comm "syz-executor902", pid 7069, jiffies 4294944350 (age 28.400s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a83ed741>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000a83ed741>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<00000000a83ed741>] slab_alloc mm/slab.c:3326 [inline]
[<00000000a83ed741>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<0000000059fc92b9>] kmalloc include/linux/slab.h:547 [inline]
[<0000000059fc92b9>] kzalloc include/linux/slab.h:742 [inline]
[<0000000059fc92b9>] net_alloc net/core/net_namespace.c:398 [inline]
[<0000000059fc92b9>] copy_net_ns+0xb2/0x220 net/core/net_namespace.c:445
[<00000000a9d74bbc>] create_new_namespaces+0x141/0x2a0 kernel/nsproxy.c:103
[<000000008047d645>] unshare_nsproxy_namespaces+0x7f/0x100 kernel/nsproxy.c:202
[<000000005993ea6e>] ksys_unshare+0x236/0x490 kernel/fork.c:2674
[<0000000019417e75>] __do_sys_unshare kernel/fork.c:2742 [inline]
[<0000000019417e75>] __se_sys_unshare kernel/fork.c:2740 [inline]
[<0000000019417e75>] __x64_sys_unshare+0x16/0x20 kernel/fork.c:2740
[<00000000f4c5f2c8>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
[<0000000038550184>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
syzbot also reported other leak in copy_net_ns -> setup_net.
This problem is already fixed by cf47a0b882a4e5f6b34c7949d7b293e9287f1972.
Fixes: 9b242610514f ("keys: Network namespace domain tag")
Reported-and-tested-by: syzbot+3b3296d032353c33184b@syzkaller.appspotmail.com
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: Use a single trace point to record each connection's
negotiated inline thresholds and the computed maximum byte size
of transport headers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Slightly reduce overhead and display more useful information.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
For debugging, the op_connect trace point should report the computed
connect delay. We can then ensure that the delay is computed at the
proper times, for example.
As a further clean-up, remove a few low-value "heartbeat" trace
points in the connect path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pending tasks are currently never awoken when the connect worker
fails. The reason is that XPRT_CONNECTED is always clear after a
failure return of rpcrdma_ep_connect, thus the
xprt_test_and_clear_connected() check in xprt_rdma_connect_worker()
always fails.
- xprt_rdma_close always clears XPRT_CONNECTED.
- rpcrdma_ep_connect always clears XPRT_CONNECTED.
After reviewing the TCP connect worker, it appears that there's no
need for extra test_and_set paranoia in xprt_rdma_connect_worker.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
On some platforms, DMA mapping part of a page is more costly than
copying bytes. Restore the pull-up code and use that when we
think it's going to be faster. The heuristic for now is to pull-up
when the size of the RPC message body fits in the buffer underlying
the head iovec.
Indeed, not involving the I/O MMU can help the RPC/RDMA transport
scale better for tiny I/Os across more RDMA devices. This is because
interaction with the I/O MMU is eliminated, as is handling a Send
completion, for each of these small I/Os. Without the explicit
unmapping, the NIC no longer needs to do a costly internal TLB shoot
down for buffers that are just a handful of bytes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Refactor: Replace spaghetti with code that makes it plain what needs
to be done for each rtype. This makes it easier to add features and
optimizations.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up: This field is not needed in the Send completion handler,
so it can be moved to struct rpcrdma_req to reduce the size of
struct rpcrdma_sendctx, and to reduce the amount of memory that
is sloshed between the sending process and the Send completion
process.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Micro-optimization: Save eight bytes in a frequently allocated
structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Micro-optimization: Save eight bytes in a frequently allocated
structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
ia->ri_id is replaced during a reconnect. The connect_worker runs
with the transport send lock held to prevent ri_id from being
dereferenced by the send_request path during this process.
Currently, however, there is no guarantee that ia->ri_id is stable
in the MR recycling worker, which operates in the background and is
not serialized with the connect_worker in any way.
But now that Local_Inv completions are being done in process
context, we can handle the recycling operation there instead of
deferring the recycling work to another process. Because the
disconnect path drains all work before allowing tear down to
proceed, it is guaranteed that Local Invalidations complete only
while the ri_id pointer is stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
MRs are now allocated on demand so we can safely throw them away on
disconnect. This way an idle transport can disconnect and it won't
pin hardware MR resources.
Two additional changes:
- Now that all MRs are destroyed on disconnect, there's no need to
check during header marshaling if a req has MRs to recycle. Each
req is sent only once per connection, and now rl_registered is
guaranteed to be empty when rpcrdma_marshal_req is invoked.
- Because MRs are now destroyed in a WQ_MEM_RECLAIM context, they
also must be allocated in a WQ_MEM_RECLAIM context. This reduces
the likelihood that device driver memory allocation will trigger
memory reclaim during NFS writeback.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Close some holes introduced by commit 6dc6ec9e04c4 ("xprtrdma: Cache
free MRs in each rpcrdma_req") that could result in list corruption.
In addition, the result that is tabulated in @count is no longer
used, so @count is removed.
Fixes: 6dc6ec9e04c4 ("xprtrdma: Cache free MRs in each rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
A recent clean up attempted to separate Receive handling and RPC
Reply processing, in the name of clean layering.
Unfortunately, we can't do this because the Receive Queue has to be
refilled _after_ the most recent credit update from the responder
is parsed from the transport header, but _before_ we wake up the
next RPC sender. That is right in the middle of
rpcrdma_reply_handler().
Usually this isn't a problem because current responder
implementations don't vary their credit grant. The one exception is
when a connection is established: the grant goes from one to a much
larger number on the first Receive. The requester MUST post enough
Receives right then so that any outstanding requests can be sent
without risking RNR and connection loss.
Fixes: 6ceea36890a0 ("xprtrdma: Refactor Receive accounting")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Clean up/code de-duplication.
Nit: RPC_CWNDSHIFT is incorrect as the initial value for xprt->cwnd.
This mistake does not appear to have operational consequences, since
the cwnd value is replaced with a valid value upon the first Receive
completion.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
This is because xprt_request_get_cong() is allowing more than one
RPC Call to be transmitted before the first Receive on the new
connection. The first Receive fills the Receive Queue based on the
server's credit grant. Before that Receive, there is only a single
Receive WR posted because the client doesn't know the server's
credit grant.
Solution is to clear rq_cong on all outstanding rpc_rqsts when the
the cwnd is reset. This is because an RPC/RDMA credit is good for
one connection instance only.
Fixes: 75891f502f5f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When adding frwr_unmap_async way back when, I re-used the existing
trace_xprtrdma_post_send() trace point to record the return code
of ib_post_send.
Unfortunately there are some cases where re-using that trace point
causes a crash. Instead, construct a trace point specific to posting
Local Invalidate WRs that will always be safe to use in that context,
and will act as a trace log eye-catcher for Local Invalidation.
Fixes: 847568942f93 ("xprtrdma: Remove fr_state")
Fixes: d8099feda483 ("xprtrdma: Reduce context switching due ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Bill Baker <bill.baker@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
To help debug problems with RPC/RDMA credit management, replace
dprintk() call sites in the transport send lock paths with trace
events.
Similar trace points are defined for the non-congestion paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Sep 11 16:35:20 manet kernel:
call_reserveresult: unrecognized error -512, exiting
Diagnostic error messages such as this likely have no value for NFS
client administrators.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Payload offload rule should also check the length of the match.
Moreover, check for unsupported link-layer fields:
nft --debug=netlink add rule firewall zones vlan id 100
...
[ payload load 2b @ link header + 0 => reg 1 ]
this loads 2byte base on ll header and offset 0.
This also fixes unsupported raw payload match.
Fixes: 92ad6325cb89 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot reported the following issue :
BUG: KCSAN: data-race in update_defense_level / update_defense_level
read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler
Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.
Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
|
if the IPVS module is removed while the sync daemon is starting, there is
a small gap where try_module_get() might fail getting the refcount inside
ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced,
and the subsequent call to stop_sync_thread() causes the following splat:
WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290
Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6]
CPU: 0 PID: 4013 Comm: modprobe Tainted: G W 5.4.0-rc1.upstream+ #741
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:module_put.part.44+0x15b/0x290
Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48
RSP: 0018:ffff888050607c78 EFLAGS: 00010297
RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590
RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3
R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90
R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0
FS: 00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0
Call Trace:
stop_sync_thread+0x3a3/0x7c0 [ip_vs]
ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs]
ops_exit_list.isra.5+0x94/0x140
unregister_pernet_operations+0x29d/0x460
unregister_pernet_device+0x26/0x60
ip_vs_cleanup+0x11/0x38 [ip_vs]
__x64_sys_delete_module+0x2d5/0x400
do_syscall_64+0xa5/0x4e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8ea8bf0db7
Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7
RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8
RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0
R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000
irq event stamp: 4538
hardirqs last enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170
hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20
softirqs last enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0
softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0
Check the return value of ip_vs_use_count_inc() and let its caller return
proper error. Inside do_ip_vs_set_ctl() the module is already refcounted,
we don't need refcount/derefcount there. Finally, in register_ip_vs_app()
and start_sync_thread(), take the module refcount earlier and ensure it's
released in the error path.
Change since v1:
- better return values in case of failure of ip_vs_use_count_inc(),
thanks to Julian Anastasov
- no need to increase/decrease the module refcount in ip_vs_set_ctl(),
thanks to Julian Anastasov
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
|
|
Having Rx-only AF_XDP sockets can potentially lead to a crash in the
system by a NULL pointer dereference in xsk_umem_consume_tx(). This
function iterates through a list of all sockets tied to a umem and
checks if there are any packets to send on the Tx ring. Rx-only
sockets do not have a Tx ring, so this will cause a NULL pointer
dereference. This will happen if you have registered one or more
Rx-only sockets to a umem and the driver is checking the Tx ring even
on Rx, or if the XDP_SHARED_UMEM mode is used and there is a mix of
Rx-only and other sockets tied to the same umem.
Fixed by only putting sockets with a Tx component on the list that
xsk_umem_consume_tx() iterates over.
Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions")
Reported-by: Kal Cutter Conley <kal.conley@dectris.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/bpf/1571645818-16244-1-git-send-email-magnus.karlsson@intel.com
|
|
UDP IPv6 packets auto flowlabels are using a 32bit secret
(static u32 hashrnd in net/core/flow_dissector.c) and
apply jhash() over fields known by the receivers.
Attackers can easily infer the 32bit secret and use this information
to identify a device and/or user, since this 32bit secret is only
set at boot time.
Really, using jhash() to generate cookies sent on the wire
is a serious security concern.
Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be
a dead end. Trying to periodically change the secret (like in sch_sfq.c)
could change paths taken in the network for long lived flows.
Let's switch to siphash, as we did in commit df453700e8d8
("inet: switch IP ID generator to siphash")
Using a cryptographically strong pseudo random function will solve this
privacy issue and more generally remove other weak points in the stack.
Packet schedulers using skb_get_hash_perturb() benefit from this change.
Fixes: b56774163f99 ("ipv6: Enable auto flow labels by default")
Fixes: 42240901f7c4 ("ipv6: Implement different admin modes for automatic flow labels")
Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Fixes: cb1ce2ef387b ("ipv6: Implement automatic flow label generation on transmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Berger <jonathann1@walla.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All users of this call are in socket or tty code, so handling
it there means we can avoid the table entry in fs/compat_ioctl.c.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Unlike the normal SIOCOUTQ, SIOCOUTQNSD was never handled in compat
mode. Add it to the common socket compat handler along with similar
ones.
Fixes: 2f4e1b397097 ("tcp: ioctl type SIOCOUTQNSD returns amount of data not sent")
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The af_unix protocol family has a custom ioctl command (inexplicibly
based on SIOCPROTOPRIVATE), but never had a compat_ioctl handler for
32-bit applications.
Since all commands are compatible here, add a trivial wrapper that
performs the compat_ptr() conversion for SIOCOUTQ/SIOCINQ. SIOCUNIXFILE
does not use the argument, but it doesn't hurt to also use compat_ptr()
here.
Fixes: ba94f3088b79 ("unix: add ioctl to open a unix socket file with O_PATH")
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All these ioctl commands are compatible, so we can handle
them with a trivial wrapper in hci_sock.c and remove
the listing in fs/compat_ioctl.c.
A few of the commands pass integer arguments instead of
pointers, so for correctness skip the compat_ptr() conversion
here.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All these ioctl commands are compatible, so we can handle
them with a trivial wrapper in rfcomm/sock.c and remove
the listing in fs/compat_ioctl.c.
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Unbind callbacks on chain deletion.
Fixes: 8fc618c52d16 ("netfilter: nf_tables_offload: refactor the nft_flow_offload_chain function")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Other garbage collector might remove an entry not fully set up yet.
[570953.958293] RIP: 0010:memcmp+0x9/0x50
[...]
[570953.958567] flow_offload_hash_cmp+0x1e/0x30 [nf_flow_table]
[570953.958585] flow_offload_lookup+0x8c/0x110 [nf_flow_table]
[570953.958606] nf_flow_offload_ip_hook+0x135/0xb30 [nf_flow_table]
[570953.958624] nf_flow_offload_inet_hook+0x35/0x37 [nf_flow_table_inet]
[570953.958646] nf_hook_slow+0x3c/0xb0
[570953.958664] __netif_receive_skb_core+0x90f/0xb10
[570953.958678] ? ip_rcv_finish+0x82/0xa0
[570953.958692] __netif_receive_skb_one_core+0x3b/0x80
[570953.958711] __netif_receive_skb+0x18/0x60
[570953.958727] netif_receive_skb_internal+0x45/0xf0
[570953.958741] napi_gro_receive+0xcd/0xf0
[570953.958764] ixgbe_clean_rx_irq+0x432/0xe00 [ixgbe]
[570953.958782] ixgbe_poll+0x27b/0x700 [ixgbe]
[570953.958796] net_rx_action+0x284/0x3c0
[570953.958817] __do_softirq+0xcc/0x27c
[570953.959464] irq_exit+0xe8/0x100
[570953.960097] do_IRQ+0x59/0xe0
[570953.960734] common_interrupt+0xf/0xf
Fixes: 43c8f131184f ("netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allows you to register one netdev basechain to multiple
devices. This adds a new NFTA_HOOK_DEVS netlink attribute to specify
the list of netdevices. Basechains store a list of hooks.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After unbinding the list of flow_block callbacks, iterate over it to
remove the existing rules in the netdevice that has just been
unregistered.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helper function to set up the flow_cls_offload object.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This allows to reuse nft_setup_cb_call() from the callback unbind path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add nft_flow_block_chain() helper function to reuse this function from
netdev event handler.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Rise the maximum limit of devices per flowtable up to 256. Rename
NFT_FLOWTABLE_DEVICE_MAX to NFT_NETDEVICE_MAX in preparation to reuse
the netdev hook parser for ingress basechain.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Allow netdevice only once per flowtable, otherwise hit EEXIST.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use a list of hooks per device instead an array.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Hardware offload needs access to the priority field, store this field in
the nf_flowtable object.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since commit 342db221829f ("sched: Call skb_get_hash_perturb
in sch_fq_codel") we no longer need anything from this file.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
Include <net/addrconf.h> for the missing declarations of
various functions. Fixes the following sparse warnings:
net/ipv6/addrconf_core.c:94:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:100:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:106:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static?
net/ipv6/addrconf_core.c:112:5: warning: symbol 'register_inet6addr_validator_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:118:5: warning: symbol 'unregister_inet6addr_validator_notifier' was not declared. Should it be static?
net/ipv6/addrconf_core.c:125:5: warning: symbol 'inet6addr_validator_notifier_call_chain' was not declared. Should it be static?
net/ipv6/addrconf_core.c:237:6: warning: symbol 'in6_dev_finish_destroy' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
syzbot found the following crash on:
HEAD commit: 1e78030e Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=148d3d1a600000
kernel config: https://syzkaller.appspot.com/x/.config?x=30cef20daf3e9977
dashboard link: https://syzkaller.appspot.com/bug?extid=13210896153522fe1ee5
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=136aa8c4600000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=109ba792600000
=====================================================================
BUG: memory leak
unreferenced object 0xffff8881207e4100 (size 128):
comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
hex dump (first 32 bytes):
00 70 16 18 81 88 ff ff 80 af 8c 22 81 88 ff ff .p........."....
00 b6 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 ..#.............
backtrace:
[<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
[<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
[<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
[<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
[<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
[<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
[<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
BUG: memory leak
unreferenced object 0xffff88811723b600 (size 64):
comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
hex dump (first 32 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 02 00 00 00 05 35 82 c1 .............5..
backtrace:
[<00000000352f46d8>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000352f46d8>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<00000000352f46d8>] slab_alloc mm/slab.c:3319 [inline]
[<00000000352f46d8>] __do_kmalloc mm/slab.c:3653 [inline]
[<00000000352f46d8>] __kmalloc+0x169/0x300 mm/slab.c:3664
[<000000008e48f3d1>] kmalloc include/linux/slab.h:557 [inline]
[<000000008e48f3d1>] ovs_vport_set_upcall_portids+0x54/0xd0 net/openvswitch/vport.c:343
[<00000000541e4f4a>] ovs_vport_alloc+0x7f/0xf0 net/openvswitch/vport.c:139
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
BUG: memory leak
unreferenced object 0xffff8881228ca500 (size 128):
comm "syz-executor032", pid 7015, jiffies 4294944622 (age 7.880s)
hex dump (first 32 bytes):
00 f0 27 18 81 88 ff ff 80 ac 8c 22 81 88 ff ff ..'........"....
40 b7 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 @.#.............
backtrace:
[<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
[<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
[<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
[<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
[<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
[<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
[<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
=====================================================================
The function in net core, register_netdevice(), may fail with vport's
destruction callback either invoked or not. After commit 309b66970ee2
("net: openvswitch: do not free vport if register_netdevice() is failed."),
the duty to destroy vport is offloaded from the driver OTOH, which ends
up in the memory leak reported.
It is fixed by releasing vport unless device is registered successfully.
To do that, the callback assignment is defered until device is registered.
Reported-by: syzbot+13210896153522fe1ee5@syzkaller.appspotmail.com
Fixes: 309b66970ee2 ("net: openvswitch: do not free vport if register_netdevice() is failed.")
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Greg Rose <gvrose8192@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
[sbrivio: this was sent to dev@openvswitch.org and never made its way
to netdev -- resending original patch]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
