summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-01-29net: packet: make pkt_sk() inlineMenglong Dong
It's better make 'pkt_sk()' inline here, as non-inline function shouldn't occur in headers. Besides, this function is simple enough to be inline. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Link: https://lore.kernel.org/r/20210127123302.29842-1-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29Bluetooth: fix indentation and alignment reported by checkpatchTomoyuki Matsushita
Signed-off-by: Tomoyuki Matsushita <xorphitus@fastmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: fix coccicheck warnings debugfsJiapeng Zhong
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Reported-by: Abaci Robot<abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-29Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirkHans de Goede
Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume. These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state. This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-28nexthop: Extract a helper for validation of get/del RTNL requestsPetr Machata
Validation of messages for get / del of a next hop is the same as will be validation of messages for get of a resilient next hop group bucket. The difference is that policy for resilient next hop group buckets is a superset of that used for next-hop get. It is therefore possible to reuse the code that validates the nhmsg fields, extracts the next-hop ID, and validates that. To that end, extract from nh_valid_get_del_req() a helper __nh_valid_get_del_req() that does just that. Make the nlh argument const so that the function can be called from the dump context, which only has a const nlh. Propagate the constness to nh_valid_get_del_req(). Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Add a callback parameter to rtm_dump_walk_nexthops()Petr Machata
In order to allow different handling for next-hop tree dumper and for bucket dumper, parameterize the next-hop tree walker with a callback. Add rtm_dump_nexthop_cb() with just the bits relevant for next-hop tree dumping. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Extract a helper for walking the next-hop treePetr Machata
Extract from rtm_dump_nexthop() a helper to walk the next hop tree. A separate function for this will be reusable from the bucket dumper. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Strongly-type context of rtm_dump_nexthop()Petr Machata
The dump operations need to keep state from one invocation to another. A scratch area is dedicated for this purpose in the passed-in argument, cb, namely via two aliased arrays, struct netlink_callback.args and .ctx. Dumping of buckets will end up having to iterate over next hops as well, and it would be nice to be able to reuse the iteration logic with the NH dumper. The fact that the logic currently relies on fixed index to the .args array, and the indices would have to be coordinated between the two dumpers, makes this somewhat awkward. To make the access patters clearer, introduce a helper struct with a NH index, and instead of using the .args array directly, use it through this structure. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Extract a common helper for parsing dump attributesPetr Machata
Requests to dump nexthops have many attributes in common with those that requests to dump buckets of resilient NH groups will have. However, they have different policies. To allow reuse of this code, extract a policy-agnostic wrapper out of nh_valid_dump_req(), and convert this function into a thin wrapper around it. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Extract dump filtering parameters into a single structurePetr Machata
Requests to dump nexthops have many attributes in common with those that requests to dump buckets of resilient NH groups will have. In order to make reuse of this code simpler, convert the code to use a single structure with filtering configuration instead of passing around the parameters one by one. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Dispatch notifier init()/fini() by group typePetr Machata
After there are several next-hop group types, initialization and finalization of notifier type needs to reflect the actual type. Transform nh_notifier_grp_info_init() and _fini() to make extending them easier. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Use enum to encode notification typeIdo Schimmel
Currently there are only two types of in-kernel nexthop notification. The two are distinguished by the 'is_grp' boolean field in 'struct nh_notifier_info'. As more notification types are introduced for more next-hop group types, a boolean is not an easily extensible interface. Instead, convert it to an enum. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Assert the invariant that a NH group is of only one typePetr Machata
Most of the code that deals with nexthop groups relies on the fact that the group is of exactly one well-known type. Currently there is only one type, "mpath", but as more next-hop group types come, it becomes desirable to have a central place where the setting is validated. Introduce such place into nexthop_create_group(), such that the check is done before the code that relies on that invariant is invoked. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Introduce to struct nh_grp_entry a per-type unionPetr Machata
The values that a next-hop group needs to keep track of depend on the group type. Introduce a union to separate fields specific to the mpath groups from fields specific to other group types. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Dispatch nexthop_select_path() by group typePetr Machata
The logic for selecting path depends on the next-hop group type. Adapt the nexthop_select_path() to dispatch according to the group type. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28nexthop: Rename nexthop_free_mpathDavid Ahern
nexthop_free_mpath really should be nexthop_free_group. Rename it. Signed-off-by: David Ahern <dsahern@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net/af_iucv: build SG skbs for TRANS_HIPER socketsJulian Wiedmann
The TX path no longer falls apart when some of its SG skbs are later linearized by lower layers of the stack. So enable the use of SG skbs in iucv_sock_sendmsg() again. This effectively reverts commit dc5367bcc556 ("net/af_iucv: don't use paged skbs for TX on HiperSockets"). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net/af_iucv: don't track individual TX skbs for TRANS_HIPER socketsJulian Wiedmann
Stop maintaining the skb_send_q list for TRANS_HIPER sockets. Not only is it extra overhead, but keeping around a list of skb clones means that we later also have to match the ->sk_txnotify() calls against these clones and free them accordingly. The current matching logic (comparing the skbs' shinfo location) is frustratingly fragile, and breaks if the skb's head is mangled in any sort of way while passing from dev_queue_xmit() to the device's HW queue. Also adjust the interface for ->sk_txnotify(), to make clear that we don't actually care about any skb internals. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net/af_iucv: count packets in the xmit pathJulian Wiedmann
The TX code keeps track of all skbs that are in-flight but haven't actually been sent out yet. For native IUCV sockets that's not a huge deal, but with TRANS_HIPER sockets it would be much better if we didn't need to maintain a list of skb clones. Note that we actually only care about the _count_ of skbs in this stage of the TX pipeline. So as prep work for removing the skb tracking on TRANS_HIPER sockets, keep track of the skb count in a separate variable and pair any list {enqueue, unlink} with a count {increment, decrement}. Then replace all occurences where we currently look at the skb list's fill level. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net/af_iucv: don't lookup the socket on TX notificationJulian Wiedmann
Whoever called iucv_sk(sk)->sk_txnotify() must already know that they're dealing with an af_iucv socket. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net/af_iucv: remove WARN_ONCE on malformed RX packetsAlexander Egorenkov
syzbot reported the following finding: AF_IUCV failed to receive skb, len=0 WARNING: CPU: 0 PID: 522 at net/iucv/af_iucv.c:2039 afiucv_hs_rcv+0x174/0x190 net/iucv/af_iucv.c:2039 CPU: 0 PID: 522 Comm: syz-executor091 Not tainted 5.10.0-rc1-syzkaller-07082-g55027a88ec9f #0 Hardware name: IBM 3906 M04 701 (KVM/Linux) Call Trace: [<00000000b87ea538>] afiucv_hs_rcv+0x178/0x190 net/iucv/af_iucv.c:2039 ([<00000000b87ea534>] afiucv_hs_rcv+0x174/0x190 net/iucv/af_iucv.c:2039) [<00000000b796533e>] __netif_receive_skb_one_core+0x13e/0x188 net/core/dev.c:5315 [<00000000b79653ce>] __netif_receive_skb+0x46/0x1c0 net/core/dev.c:5429 [<00000000b79655fe>] netif_receive_skb_internal+0xb6/0x220 net/core/dev.c:5534 [<00000000b796ac3a>] netif_receive_skb+0x42/0x318 net/core/dev.c:5593 [<00000000b6fd45f4>] tun_rx_batched.isra.0+0x6fc/0x860 drivers/net/tun.c:1485 [<00000000b6fddc4e>] tun_get_user+0x1c26/0x27f0 drivers/net/tun.c:1939 [<00000000b6fe0f00>] tun_chr_write_iter+0x158/0x248 drivers/net/tun.c:1968 [<00000000b4f22bfa>] call_write_iter include/linux/fs.h:1887 [inline] [<00000000b4f22bfa>] new_sync_write+0x442/0x648 fs/read_write.c:518 [<00000000b4f238fe>] vfs_write.part.0+0x36e/0x5d8 fs/read_write.c:605 [<00000000b4f2984e>] vfs_write+0x10e/0x148 fs/read_write.c:615 [<00000000b4f29d0e>] ksys_write+0x166/0x290 fs/read_write.c:658 [<00000000b8dc4ab4>] system_call+0xe0/0x28c arch/s390/kernel/entry.S:415 Last Breaking-Event-Address: [<00000000b8dc64d4>] __s390_indirect_jump_r14+0x0/0xc Malformed RX packets shouldn't generate any warnings because debugging info already flows to dropmon via the kfree_skb(). Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29bpf: Enable bpf_{g,s}etsockopt in BPF_CGROUP_UDP{4,6}_RECVMSGStanislav Fomichev
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket. Note that we could remove the switch for prog->expected_attach_type altogether since all current sock_addr attach types are covered. However, it makes sense to keep it as a safe-guard in case new sock_addr attach types are added that might not operate on a locked socket. Therefore, avoid to let this slip through. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127232853.3753823-5-sdf@google.com
2021-01-29bpf: Enable bpf_{g,s}etsockopt in BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAMEStanislav Fomichev
Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127232853.3753823-3-sdf@google.com
2021-01-29bpf: Enable bpf_{g,s}etsockopt in BPF_CGROUP_UDP{4,6}_SENDMSGStanislav Fomichev
Can be used to query/modify socket state for unconnected UDP sendmsg. Those hooks run as BPF_CGROUP_RUN_SA_PROG_LOCK and operate on a locked socket. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210127232853.3753823-2-sdf@google.com
2021-01-28Merge tag 'mlx5-updates-2021-01-13' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 subfunction support Parav Pandit says: This patchset introduces support for mlx5 subfunction (SF). A subfunction is a lightweight function that has a parent PCI function on which it is deployed. mlx5 subfunction has its own function capabilities and its own resources. This means a subfunction has its own dedicated queues(txq, rxq, cq, eq). These queues are neither shared nor stolen from the parent PCI function. When subfunction is RDMA capable, it has its own QP1, GID table and rdma resources neither shared nor stolen from the parent PCI function. A subfunction has dedicated window in PCI BAR space that is not shared with the other subfunctions or parent PCI function. This ensures that all class devices of the subfunction accesses only assigned PCI BAR space. A Subfunction supports eswitch representation through which it supports tc offloads. User must configure eswitch to send/receive packets from/to subfunction port. Subfunctions share PCI level resources such as PCI MSI-X IRQs with their other subfunctions and/or with its parent PCI function. Subfunction support is discussed in detail in RFC [1] and [2]. RFC [1] and extension [2] describes requirements, design and proposed plumbing using devlink, auxiliary bus and sysfs for systemd/udev support. Functionality of this patchset is best explained using real examples further below. overview: -------- A subfunction can be created and deleted by a user using devlink port add/delete interface. A subfunction can be configured using devlink port function attribute before its activated. When a subfunction is activated, it results in an auxiliary device on the host PCI device where it is deployed. A driver binds to the auxiliary device that further creates supported class devices. example subfunction usage sequence: ----------------------------------- Change device to switchdev mode: $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Add a devlink port of subfunction flavour: $ devlink port add pci/0000:06:00.0 flavour pcisf pfnum 0 sfnum 88 Configure mac address of the port function: $ devlink port function set ens2f0npf0sf88 hw_addr 00:00:00:00:88:88 Now activate the function: $ devlink port function set ens2f0npf0sf88 state active Now use the auxiliary device and class devices: $ devlink dev show pci/0000:06:00.0 auxiliary/mlx5_core.sf.4 $ ip link show 127: ens2f0np0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 24:8a:07:b3:d1:12 brd ff:ff:ff:ff:ff:ff altname enp6s0f0np0 129: p0sf88: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 00:00:00:00:88:88 brd ff:ff:ff:ff:ff:ff $ rdma dev show 43: rdmap6s0f0: node_type ca fw 16.29.0550 node_guid 248a:0703:00b3:d112 sys_image_guid 248a:0703:00b3:d112 44: mlx5_0: node_type ca fw 16.29.0550 node_guid 0000:00ff:fe00:8888 sys_image_guid 248a:0703:00b3:d112 After use inactivate the function: $ devlink port function set ens2f0npf0sf88 state inactive Now delete the subfunction port: $ devlink port del ens2f0npf0sf88 [1] https://lore.kernel.org/netdev/20200519092258.GF4655@nanopsycho/ [2] https://marc.info/?l=linux-netdev&m=158555928517777&w=2 ================= * tag 'mlx5-updates-2021-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Add devlink subfunction port documentation devlink: Extend devlink port documentation for subfunctions devlink: Add devlink port documentation net/mlx5: SF, Port function state change support net/mlx5: SF, Add port add delete functionality net/mlx5: E-switch, Add eswitch helpers for SF vport net/mlx5: E-switch, Prepare eswitch to handle SF vport net/mlx5: SF, Add auxiliary device driver net/mlx5: SF, Add auxiliary device support net/mlx5: Introduce vhca state event notifier devlink: Support get and set state of port function devlink: Support add and delete devlink port devlink: Introduce PCI SF port flavour and port attribute devlink: Prepare code to fill multiple port function attributes ==================== Link: https://lore.kernel.org/r/20210122193658.282884-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28Merge tag 'net-5.11-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes including fixes from can, xfrm, wireless, wireless-drivers and netfilter trees. Nothing scary, Intel WiFi-related fixes seemed most notable to the users. Current release - regressions: - dsa: microchip: ksz8795: fix KSZ8794 port map again to program the CPU port correctly Current release - new code bugs: - iwlwifi: pcie: reschedule in long-running memory reads Previous releases - regressions: - iwlwifi: dbg: don't try to overwrite read-only FW data - iwlwifi: provide gso_type to GSO packets - octeontx2: make sure the buffer is 128 byte aligned - tcp: make TCP_USER_TIMEOUT accurate for zero window probes - xfrm: fix wraparound in xfrm_policy_addr_delta() - xfrm: fix oops in xfrm_replay_advance_bmp due to a race between CPUs in presence of packet reorder - tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN - wext: fix NULL-ptr-dereference with cfg80211's lack of commit() Previous releases - always broken: - igc: fix link speed advertising - stmmac: configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing - team: protect features update by RCU to avoid deadlock - xfrm: fix disable_xfrm sysctl when used on xfrm interfaces themselves - fec: fix temporary RMII clock reset on link up - can: dev: prevent potential information leak in can_fill_info() Misc: - mrp: fix bad packing of MRP test packet structures - uapi: fix big endian definition of ipv6_rpl_sr_hdr - add David Ahern to IPv4/IPv6 maintainers" * tag 'net-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration selftests: forwarding: Specify interface when invoking mausezahn stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing net: usb: cdc_ether: added support for Thales Cinterion PLSx3 modem family. ibmvnic: Ensure that CRQ entry read are correctly ordered MAINTAINERS: add missing header for bonding net: decnet: fix netdev refcount leaking on error path net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP can: dev: prevent potential information leak in can_fill_info() net: fec: Fix temporary RMII clock reset on link up net: lapb: Add locking to the lapb module team: protect features update by RCU to avoid deadlock MAINTAINERS: add David Ahern to IPv4/IPv6 maintainers net/mlx5: CT: Fix incorrect removal of tuple_nat_node from nat rhashtable net/mlx5e: Revert parameters on errors when changing MTU and LRO state without reset net/mlx5e: Revert parameters on errors when changing trust state without reset net/mlx5e: Correctly handle changing the number of queues when the interface is down net/mlx5e: Fix CT rule + encap slow path offload and deletion net/mlx5e: Disable hw-tc-offload when MLX5_CLS_ACT config is disabled ...
2021-01-28rxrpc: Fix memory leak in rxrpc_lookup_localTakeshi Misawa
Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked. struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp) - peer->local = local; + peer->local = rxrpc_get_local(local); rxrpc_discard_prealloc also need ref release in discarding. syzbot report: BUG: memory leak unreferenced object 0xffff8881080ddc00 (size 256): comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff ................ backtrace: [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline] [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline] [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline] [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244 [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149 [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64 [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126 [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152 [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342 [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483 [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110 [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226 [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957 [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline] [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline] [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023 [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com> Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28net: reduce indentation level in sk_clone_lock()Eric Dumazet
Rework initial test to jump over init code if memory allocation has failed. Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210127152731.748663-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-28cfg80211: call cfg80211_destroy_ifaces() with wiphy lock heldJohannes Berg
This is needed since it calls into the driver, which must have the same context as if we got to destroy an interface through nl80211. Fix this, and add a direct lockdep assertion so we don't see it pop up only when the driver calls back to cfg80211. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Reported-by: syzbot+4305e814f9b267131776@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210128183454.d31df9cbd7ce.I1beb07c9492f0ade900e864a098c57041e7a7ebf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-28wext: call cfg80211_set_encryption() with wiphy lock heldJohannes Berg
Similar to the previous commit, we need to hold the wiphy lock here. There's a second instance that is correct already, fix this one as well. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210128183454.ea2f086465ed.I891d3bb44f068e6d97c160005010f052f28ab6e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-28wext: call cfg80211_change_iface() with wiphy lock heldJohannes Berg
This is needed now that all the driver callbacks are protected by the wiphy lock rather than (just) the RTNL. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Reported-by: syzbot+d2d412349f88521938aa@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210128183454.e81bc6789b4b.I5deb8b6bfdc8b4ea7696cb2447ee6c58c7ce9a4e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-28nl80211: call cfg80211_dev_rename() under RTNLJohannes Berg
This is required, and we have an assertion, move the RTNL unlock down to cover cfg80211_dev_rename(). Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Reported-by: syzbot+ed107c5fa3e21cdcd86e@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20210128183454.16a4ea036740.I2beeb391dc322d6f1df3ee2612e714e0a7817397@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-28ath9k: fix build error with LEDS_CLASS=mArnd Bergmann
When CONFIG_ATH9K is built-in but LED support is in a loadable module, both ath9k drivers fails to link: x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_deinit_leds': gpio.c:(.text+0x36): undefined reference to `led_classdev_unregister' x86_64-linux-ld: drivers/net/wireless/ath/ath9k/gpio.o: in function `ath_init_leds': gpio.c:(.text+0x179): undefined reference to `led_classdev_register_ext' The problem is that the 'imply' keyword does not enforce any dependency but is only a weak hint to Kconfig to enable another symbol from a defconfig file. Change imply to a 'depends on LEDS_CLASS' that prevents the incorrect configuration but still allows building the driver without LED support. The 'select MAC80211_LEDS' is now ensures that the LED support is actually used if it is present, and the added Kconfig dependency on MAC80211_LEDS ensures that it cannot be enabled manually when it has no effect. Fixes: 197f466e93f5 ("ath9k_htc: Do not select MAC80211_LEDS by default") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210125113654.2408057-1-arnd@kernel.org
2021-01-27devlink: Add DMAC filter generic packet trapAya Levin
Add packet trap that can report packets that were dropped due to destination MAC filtering. Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27Merge tag 'mac80211-next-for-net-next-2021-01-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== More updates: * many minstrel improvements, including removal of the old minstrel in favour of minstrel_ht * speed improvements on FQ * support for RX decapsulation (header conversion) offload * RTNL reduction: limit RTNL usage in the wireless stack mostly to where really needed (regulatory not yet) to reduce contention on it * tag 'mac80211-next-for-net-next-2021-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (24 commits) mac80211: minstrel_ht: fix regression in the max_prob_rate fix virt_wifi: fix deadlock on RTNL cfg80211: avoid holding the RTNL when calling the driver cfg80211: change netdev registration/unregistration semantics mac80211: minstrel_ht: fix rounding error in throughput calculation mac80211: minstrel_ht: increase stats update interval mac80211: minstrel_ht: fix max probability rate selection mac80211: minstrel_ht: improve sample rate selection mac80211: minstrel_ht: improve ampdu length estimation mac80211: minstrel_ht: remove old ewma based rate average code mac80211: remove legacy minstrel rate control mac80211: minstrel_ht: add support for OFDM rates on non-HT clients mac80211: minstrel_ht: clean up CCK code mac80211: introduce aql_enable node in debugfs cfg80211: Add phyrate conversion support for extended MCS in 60GHz band cfg80211: add VHT rate entries for MCS-10 and MCS-11 mac80211: reduce peer HE MCS/NSS to own capabilities mac80211: remove NSS number of 160MHz if not support 160MHz for HE mac80211_hwsim: add 6GHz channels mac80211: add LDPC encoding to ieee80211_parse_tx_radiotap ... ==================== Link: https://lore.kernel.org/r/20210127210915.135550-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27Merge tag 'linux-can-next-for-5.12-20210127' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-01-27 The first two patches are by me and fix typos on the CAN gw protocol and the flexcan driver. The next patch is by Vincent Mailhol and targets the CAN driver infrastructure, it exports the function that converts the CAN state into a human readable string. A patch by me, which target the CAN driver infrastructure, too, makes the calculation in can_fd_len2dlc() more readable. A patch by Tom Rix fixes a checkpatch warning in the mcba_usb driver. The next seven patches target the mcp251xfd driver. Su Yanjun's patch replaces several hardcoded assumptions when calling regmap, by using regmap_get_val_bytes(). The remaining patches are by me. First an open coded check is replaced by an existing helper function, then in the TX path the padding for CAN-FD frames is cleaned up. The next two patches clean up the RTR frame handling in the RX and TX path. Then support for len8_dlc is added. The last patch adds BQL support. * tag 'linux-can-next-for-5.12-20210127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: mcp251xfd: add BQL support can: mcp251xfd: add len8_dlc support can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): don't copy data for RTR CAN frames in TX-path can: mcp251xfd: mcp251xfd_hw_rx_obj_to_skb(): don't copy data for RTR CAN frames in RX-path can: mcp251xfd: mcp251xfd_tx_obj_from_skb(): clean up padding of CAN-FD frames can: mcp251xfd: mcp251xfd_start_xmit(): use mcp251xfd_get_tx_free() to check TX is is full can: mcp251xfd: replace sizeof(u32) with val_bytes in regmap can: mcba_usb: remove h from printk format specifier can: length: can_fd_len2dlc(): make legnth calculation readable again can: dev: export can_get_state_str() function can: flexcan: fix typos can: gw: fix typo ==================== Link: https://lore.kernel.org/r/20210127092227.2775573-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27tipc: remove duplicated code in tipc_msg_createHoang Huu Le
Remove a duplicate code checking for header size in tipc_msg_create() as it's already being done in tipc_msg_init(). Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20210127025123.6390-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27bpf: Allow rewriting to ports under ip_unprivileged_port_startStanislav Fomichev
At the moment, BPF_CGROUP_INET{4,6}_BIND hooks can rewrite user_port to the privileged ones (< ip_unprivileged_port_start), but it will be rejected later on in the __inet_bind or __inet6_bind. Let's add another return value to indicate that CAP_NET_BIND_SERVICE check should be ignored. Use the same idea as we currently use in cgroup/egress where bit #1 indicates CN. Instead, for cgroup/bind{4,6}, bit #1 indicates that CAP_NET_BIND_SERVICE should be bypassed. v5: - rename flags to be less confusing (Andrey Ignatov) - rework BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY to work on flags and accept BPF_RET_SET_CN (no behavioral changes) v4: - Add missing IPv6 support (Martin KaFai Lau) v3: - Update description (Martin KaFai Lau) - Fix capability restore in selftest (Martin KaFai Lau) v2: - Switch to explicit return code (Martin KaFai Lau) Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrey Ignatov <rdna@fb.com> Link: https://lore.kernel.org/bpf/20210127193140.3170382-1-sdf@google.com
2021-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Honor stateful expressions defined in the set from the dynset extension. The set definition provides a stateful expression that must be used by the dynset expression in case it is specified. 2) Missing timeout extension in the set element in the dynset extension leads to inconsistent ruleset listing, not allowing the user to restore timeout and expiration on ruleset reload. 3) Do not dump the stateful expression from the dynset extension if it coming from the set definition. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nft_dynset: dump expressions when set definition contains no expressions netfilter: nft_dynset: add timeout extension to template netfilter: nft_dynset: honor stateful expressions in set definition ==================== Link: https://lore.kernel.org/r/20210127132512.5472-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: bridge: multicast: make tracked EHT hosts limit configurableNikolay Aleksandrov
Add two new port attributes which make EHT hosts limit configurable and export the current number of tracked EHT hosts: - IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT: configure/retrieve current limit - IFLA_BRPORT_MCAST_EHT_HOSTS_CNT: current number of tracked hosts Setting IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT to 0 is currently not allowed. Note that we have to increase RTNL_SLAVE_MAX_TYPE to 38 minimum, I've increased it to 40 to have space for two more future entries. v2: move br_multicast_eht_set_hosts_limit() to br_multicast_eht.c, no functional change Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: bridge: multicast: add per-port EHT hosts limitNikolay Aleksandrov
Add a default limit of 512 for number of tracked EHT hosts per-port. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: decnet: fix netdev refcount leaking on error pathVadim Fedorenko
On building the route there is an assumption that the destination could be local. In this case loopback_dev is used to get the address. If the address is still cannot be retrieved dn_route_output_slow returns EADDRNOTAVAIL with loopback_dev reference taken. Cannot find hash for the fixes tag because this code was introduced long time ago. I don't think that this bug has ever fired but the patch is done just to have a consistent code base. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1611619334-20955-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: remove redundant 'depends on NET'Masahiro Yamada
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: l3mdev: use obj-$(CONFIG_NET_L3_MASTER_DEV) form in net/MakefileMasahiro Yamada
CONFIG_NET_L3_MASTER_DEV is a bool option. Change the ifeq conditional to the standard obj-$(CONFIG_NET_L3_MASTER_DEV) form. Use obj-y in net/l3mdev/Makefile because Kbuild visits this Makefile only when CONFIG_NET_L3_MASTER_DEV=y. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210125231659.106201-4-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: switchdev: use obj-$(CONFIG_NET_SWITCHDEV) form in net/MakefileMasahiro Yamada
CONFIG_NET_SWITCHDEV is a bool option. Change the ifeq conditional to the standard obj-$(CONFIG_NET_SWITCHDEV) form. Use obj-y in net/switchdev/Makefile because Kbuild visits this Makefile only when CONFIG_NET_SWITCHDEV=y. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125231659.106201-3-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: dcb: use obj-$(CONFIG_DCB) form in net/MakefileMasahiro Yamada
CONFIG_DCB is a bool option. Change the ifeq conditional to the standard obj-$(CONFIG_DCB) form. Use obj-y in net/dcb/Makefile because Kbuild visits this Makefile only when CONFIG_DCB=y. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125231659.106201-2-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: move CONFIG_NET guard to top MakefileMasahiro Yamada
When CONFIG_NET is disabled, nothing under the net/ directory is compiled. Move the CONFIG_NET guard to the top Makefile so the net/ directory is entirely skipped. When Kbuild visits net/Makefile, CONFIG_NET is obvioulsy 'y' because CONFIG_NET is a bool option. Clean up net/Makefile. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125231659.106201-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27net: sysctl: remove redundant #ifdef CONFIG_NETMasahiro Yamada
CONFIG_NET is a bool option, and this file is compiled only when CONFIG_NET=y. Remove #ifdef CONFIG_NET, which we know it is always met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125231421.105936-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-27mptcp: pm nl: reduce variable scopeMatthieu Baerts
To avoid confusions like when working on the previous patch, better to declare and assign this variable only where it is needed. Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-12 08:01:09 +0000