| Age | Commit message (Collapse) | Author |
|---|
|
Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.
This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible
(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.
In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.
Case C is a kernel panic scenario.
In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.
It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.
A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock
Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module
Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module
Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid
Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)
Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250514154028.1062909-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of stragglers:
- mac80211: fix syzbot/ubsan in scan counted-by
- mt76: fix NAPI handling on driver remove
- mt67: fix multicast/ipv6 receive
* tag 'wireless-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
====================
Link: https://patch.msgid.link/20250515121749.61912-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rds_page_remainder is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-16-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rds_page_remainder_alloc() obtains the current CPU with get_cpu() while
disabling preemption. Then the CPU number is used to access the per-CPU
data structure via per_cpu().
This can be optimized by relying on local_bh_disable() to provide a
stable CPU number/ avoid migration and then using this_cpu_ptr() to
retrieve the data structure.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-15-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rds_page_remainder_alloc() is invoked from a preemptible context or a
tasklet. There is no need to disable interrupts for locking.
Use local_bh_disable() instead of local_irq_save() for locking.
Cc: Allison Henderson <allison.henderson@oracle.com>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-14-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mptcp_delegated_actions is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT this data
structure requires explicit locking.
Add a local_lock_t to the data structure and use local_lock_nested_bh() for
locking. This change adds only lockdep coverage and does not alter the
functional behaviour for !PREEMPT_RT.
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang@kernel.org>
Cc: mptcp@lists.linux.dev
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-13-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sch_frag_data_storage is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Add local_lock_t to the struct and use local_lock_nested_bh() for locking.
This change adds only lockdep coverage and does not alter the functional
behaviour for !PREEMPT_RT.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-12-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
mirred_nest_level is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move mirred_nest_level to struct netdev_xmit as u8, provide wrappers.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-11-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ovs_frag_data_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Move ovs_frag_data_storage into the struct ovs_pcpu_storage which already
provides locking for the structure.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-10-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ovs_pcpu_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
The data structure can be referenced recursive and there is a recursion
counter to avoid too many recursions.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. Add an owner of the struct which is
the current task and acquire the lock only if the structure is not owned
by the current task.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-9-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
exec_actions_level is a per-CPU integer allocated at compile time.
action_fifos and flow_keys are per-CPU pointer and have their data
allocated at module init time.
There is no gain in splitting it, once the module is allocated, the
structures are allocated.
Merge the three per-CPU variables into ovs_pcpu_storage, adapt callers.
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Ilya Maximets <i.maximets@ovn.org>
Cc: dev@openvswitch.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250512092736.229935-8-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
nat_keepalive_sk_ipv[46] is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Use sock_bh_locked which has a sock pointer and a local_lock_t. Use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-7-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
system_page_pool is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Make a struct with a page_pool member (original system_page_pool) and a
local_lock_t and use local_lock_nested_bh() for locking. This change
adds only lockdep coverage and does not alter the functional behaviour
for !PREEMPT_RT.
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-6-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
hmac_storage is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-5-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The statistics are incremented with raw_cpu_inc() assuming it always
happens with bottom half disabled. Without per-CPU locking in
local_bh_disable() on PREEMPT_RT this is no longer true.
Use this_cpu_inc() on PREEMPT_RT for the increment to not worry about
preemption.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-4-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dst_cache::cache is a per-CPU variable and relies on disabled BH for its
locking. Without per-CPU locking in local_bh_disable() on PREEMPT_RT
this data structure requires explicit locking.
Add a local_lock_t to the data structure and use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-3-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With preemptible softirq and no per-CPU locking in local_bh_disable() on
PREEMPT_RT the consumer can be preempted while a skb is returned.
Avoid the race by disabling the recycle into the cache on PREEMPT_RT.
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-2-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make sure that n_channels is set after allocating the
struct cfg80211_registered_device::int_scan_req member. Seen with
syzkaller:
UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:1208:5
index 0 is out of range for type 'struct ieee80211_channel *[] __counted_by(n_channels)' (aka 'struct ieee80211_channel *[]')
This was missed in the initial conversions because I failed to locate
the allocation likely due to the "sizeof(void *)" not matching the
"channels" array type.
Reported-by: syzbot+4bcdddd48bb6f0be0da1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/680fd171.050a0220.2b69d1.045e.GAE@google.com/
Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20250509184641.work.542-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Both packet and crypto offloads perform decryption while packet is
arriving to the HW from the wire. It means that there is no possible
way to perform lookup on XFRM if_id as it can't be set to be "before' HW.
So instead of silently ignore this configuration, let's warn users about
misconfiguration.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Users can set any seq/seq_hi/oseq/oseq_hi values. The XFRM core code
doesn't prevent from them to set even 0xFFFFFFFF, however this value
will cause for traffic drop.
Is is happening because SEQ numbers here mean that packet with such
number was processed and next number should be sent on the wire. In this
case, the next number will be 0, and it means overflow which causes to
(expected) packet drops.
While it can be considered as misconfiguration and handled by XFRM
datapath in the same manner as any other SEQ number, let's add
validation to easy for packet offloads implementations which need to
configure HW with next SEQ to send and not with current SEQ like it is
done in core code.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This change enhances the robustness of validate_userspace() by ensuring
that all Netlink attributes are fully contained within the parent
attribute. The previous use of nla_parse_nested_deprecated() could
silently skip trailing or malformed attributes, as it stops parsing at
the first invalid entry.
By switching to nla_parse_deprecated_strict(), we make sure only fully
validated attributes are copied for later use.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/67eb414e2d250e8408bb8afeb982deca2ff2b10b.1747037304.git.echaudro@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prior to this patch, the mark is sanitized (applying the state's mask to
the state's value) only on inserts when checking if a conflicting XFRM
state or policy exists.
We discovered in Cilium that this same sanitization does not occur
in the hot-path __xfrm_state_lookup. In the hot-path, the sk_buff's mark
is simply compared to the state's value:
if ((mark & x->mark.m) != x->mark.v)
continue;
Therefore, users can define unsanitized marks (ex. 0xf42/0xf00) which will
never match any packet.
This commit updates __xfrm_state_insert and xfrm_policy_insert to store
the sanitized marks, thus removing this footgun.
This has the side effect of changing the ip output, as the
returned mark will have the mask applied to it when printed.
Fixes: 3d6acfa7641f ("xfrm: SA lookups with mark")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Co-developed-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We should not enable netmem TX for drivers that don't declare support.
Check for driver netmem TX support during devmem TX binding and fail if
the driver does not have the functionality.
Check for driver support in validate_xmit_skb as well.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-9-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Augment dmabuf binding to be able to handle TX. Additional to all the RX
binding, we also create tx_vec needed for the TX path.
Provide API for sendmsg to be able to send dmabufs bound to this device:
- Provide a new dmabuf_tx_cmsg which includes the dmabuf to send from.
- MSG_ZEROCOPY with SCM_DEVMEM_DMABUF cmsg indicates send from dma-buf.
Devmem is uncopyable, so piggyback off the existing MSG_ZEROCOPY
implementation, while disabling instances where MSG_ZEROCOPY falls back
to copying.
We additionally pipe the binding down to the new
zerocopy_fill_skb_from_devmem which fills a TX skb with net_iov netmems
instead of the traditional page netmems.
We also special case skb_frag_dma_map to return the dma-address of these
dmabuf net_iovs instead of attempting to map pages.
The TX path may release the dmabuf in a context where we cannot wait.
This happens when the user unbinds a TX dmabuf while there are still
references to its netmems in the TX path. In that case, the netmems will
be put_netmem'd from a context where we can't unmap the dmabuf, Resolve
this by making __net_devmem_dmabuf_binding_free schedule_work'd.
Based on work by Stanislav Fomichev <sdf@fomichev.me>. A lot of the meat
of the implementation came from devmem TCP RFC v1[1], which included the
TX path, but Stan did all the rebasing on top of netmem/net_iov.
Cc: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-5-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add bind-tx netlink call to attach dmabuf for TX; queue is not
required, only ifindex and dmabuf fd for attachment.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-4-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently net_iovs support only pp ref counts, and do not support a
page ref equivalent.
This is fine for the RX path as net_iovs are used exclusively with the
pp and only pp refcounting is needed there. The TX path however does not
use pp ref counts, thus, support for get_page/put_page equivalent is
needed for netmem.
Support get_netmem/put_netmem. Check the type of the netmem before
passing it to page or net_iov specific code to obtain a page ref
equivalent.
For dmabuf net_iovs, we obtain a ref on the underlying binding. This
ensures the entire binding doesn't disappear until all the net_iovs have
been put_netmem'ed. We do not need to track the refcount of individual
dmabuf net_iovs as we don't allocate/free them from a pool similar to
what the buddy allocator does for pages.
This code is written to be extensible by other net_iov implementers.
get_netmem/put_netmem will check the type of the netmem and route it to
the correct helper:
pages -> [get|put]_page()
dmabuf net_iovs -> net_devmem_[get|put]_net_iov()
new net_iovs -> new helpers
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-3-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Later patches in the series adds TX net_iovs where there is no pp
associated, so we can't rely on niov->pp->mp_ops to tell what is the
type of the net_iov.
Add a type enum to the net_iov which tells us the net_iov type.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508004830.4100853-2-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Recent devlink change added validation of an integer value
via NLA_POLICY_VALIDATE_FN, for sparse enums. Handle this
in policy dump. We can't extract any info out of the callback,
so report only the type.
Fixes: 429ac6211494 ("devlink: define enum for attr types of dynamic attributes")
Reported-by: syzbot+01eb26848144516e7f0a@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20250509212751.1905149-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__netdev_update_features() expects the netdevice to be ops-locked, but
it gets called recursively on the lower level netdevices to sync their
features, and nothing locks those.
This commit fixes that, with the assumption that it shouldn't be possible
for both higher-level and lover-level netdevices to require the instance
lock, because that would lead to lock dependency warnings.
Without this, playing with higher level (e.g. vxlan) netdevices on top
of netdevices with instance locking enabled can run into issues:
WARNING: CPU: 59 PID: 206496 at ./include/net/netdev_lock.h:17 netif_napi_add_weight_locked+0x753/0xa60
[...]
Call Trace:
<TASK>
mlx5e_open_channel+0xc09/0x3740 [mlx5_core]
mlx5e_open_channels+0x1f0/0x770 [mlx5_core]
mlx5e_safe_switch_params+0x1b5/0x2e0 [mlx5_core]
set_feature_lro+0x1c2/0x330 [mlx5_core]
mlx5e_handle_feature+0xc8/0x140 [mlx5_core]
mlx5e_set_features+0x233/0x2e0 [mlx5_core]
__netdev_update_features+0x5be/0x1670
__netdev_update_features+0x71f/0x1670
dev_ethtool+0x21c5/0x4aa0
dev_ioctl+0x438/0xae0
sock_ioctl+0x2ba/0x690
__x64_sys_ioctl+0xa78/0x1700
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250509072850.2002821-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To handle device removal, svc_rdma_accept() requests removal
notification for the underlying device when accepting a connection.
However svc_rdma_free() is not invoked if svc_rdma_accept() fails.
There needs to be a matching "unregister" in that case; otherwise
the device cannot be removed.
Fixes: c4de97f7c454 ("svcrdma: Handle device removal outside of the CM event handler")
Cc: stable@vger.kernel.org
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The connection backlog passed to listen() denotes the number of
connections that are fully established, but that have not yet been
accept()ed. If the amount goes above that level, new connection requests
will be dropped on the floor until the value goes down. If all the knfsd
threads are bogged down in (e.g.) disk I/O, new connection attempts can
stall because of this.
For the same rationale that Trond points out in the userland patch [1],
ensure that svc_xprt sockets created by the kernel allow SOMAXCONN
(4096) backlogged connections instead of the 64 that they do today.
[1]: https://lore.kernel.org/linux-nfs/20240308180223.2965601-1-trond.myklebust@hammerspace.com/
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I've been looking at a problem where we see increased RPC timeouts in
clients when the nfs_layout_flexfiles dataserver_timeo value is tuned
very low (6s). This is necessary to ensure quick failover to a different
mirror if a server goes down, but it causes a lot more major RPC timeouts.
Ultimately, the problem is server-side however. It's sometimes doesn't
respond to connection attempts. My theory is that the interrupt handler
runs when a connection comes in, the xprt ends up being enqueued, but it
takes a significant amount of time for the nfsd thread to pick it up.
Currently, the svc_xprt_dequeue tracepoint displays "wakeup-us". This is
the time between the wake_up() call, and the thread dequeueing the xprt.
If no thread was woken, or the thread ended up picking up a different
xprt than intended, then this value won't tell us how long the xprt was
waiting.
Add a new xpt_qtime field to struct svc_xprt and set it in
svc_xprt_enqueue(). When the dequeue tracepoint fires, also store the
time that the xprt sat on the queue in total. Display it as "qtime-us".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When cache cleanup runs concurrently with cache entry removal, a race
condition can occur that leads to incorrect nextcheck times. This can
delay cache cleanup for the cache_detail by up to 1800 seconds:
1. cache_clean() sets nextcheck to current time plus 1800 seconds
2. While scanning a non-empty bucket, concurrent cache entry removal can
empty that bucket
3. cache_clean() finds no cache entries in the now-empty bucket to update
the nextcheck time
4. This maybe delays the next scan of the cache_detail by up to 1800
seconds even when it should be scanned earlier based on remaining
entries
Fix this by moving the hash_lock acquisition earlier in cache_clean().
This ensures bucket emptiness checks and nextcheck updates happen
atomically, preventing the race between cleanup and entry removal.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The cache_detail structure uses a "nextcheck" field to control hash table
scanning intervals. When a table scan begins, nextcheck is set to current
time plus 1800 seconds. During scanning, if cache_detail is not empty and
a cache entry's expiry time is earlier than the current nextcheck, the
nextcheck is updated to that expiry time.
This mechanism ensures that:
1) Empty cache_details are scanned every 1800 seconds to avoid unnecessary
scans
2) Non-empty cache_details are scanned based on the earliest expiry time
found
However, when adding a new cache entry to an empty cache_detail, the
nextcheck time was not being updated, remaining at 1800 seconds. This
could delay cache cleanup for up to 1800 seconds, potentially blocking
threads(such as nfsd) that are waiting for cache cleanup.
Fix this by updating the nextcheck time whenever a new cache entry is
added.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When we specify apply_bytes, we divide the msg into multiple segments,
each with a length of 'send', and every time we send this part of the data
using tcp_bpf_sendmsg_redir(), we use sk_msg_return_zero() to uncharge the
memory of the specified 'send' size.
However, if the first segment of data fails to send, for example, the
peer's buffer is full, we need to release all of the msg. When releasing
the msg, we haven't uncharged the memory of the subsequent segments.
This modification does not make significant logical changes, but only
fills in the missing uncharge places.
This issue has existed all along, until it was exposed after we added the
apply test in test_sockmap:
commit 3448ad23b34e ("selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap")
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Closes: https://lore.kernel.org/bpf/aAmIi0vlycHtbXeb@pop-os.localdomain/T/#t
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/20250425060015.6968-2-jiayuan.chen@linux.dev
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- fix duplicate MAC address check, by Matthias Schiffer
* tag 'batadv-net-pullrequest-20250509' of git://git.open-mesh.org/linux-merge:
batman-adv: fix duplicate MAC address check
====================
Link: https://patch.msgid.link/20250509090240.107796-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- constify and move broadcast addr definition, Matthias Schiffer
- remove start/stop queue function for mesh-iface, by Antonio Quartulli
- switch to crc32 header for crc32c, by Sven Eckelmann
- drop unused net_namespace.h include, by Sven Eckelmann
* tag 'batadv-next-pullrequest-20250509' of git://git.open-mesh.org/linux-merge:
batman-adv: Drop unused net_namespace.h include
batman-adv: Switch to crc32 header for crc32c
batman-adv: no need to start/stop queue on mesh-iface
batman-adv: constify and move broadcast addr definition
batman-adv: Start new development cycle
====================
Link: https://patch.msgid.link/20250509091041.108416-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New timestamping API was introduced in commit 66f7223039c0 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert DSA to the new API, so that the ndo_eth_ioctl() path can
be removed completely.
Move the ds->ops->port_hwtstamp_get() and ds->ops->port_hwtstamp_set()
calls from dsa_user_ioctl() to dsa_user_hwtstamp_get() and
dsa_user_hwtstamp_set().
Due to the fact that the underlying ifreq type changes to
kernel_hwtstamp_config, the drivers and the Ocelot switchdev front-end,
all hooked up directly or indirectly, must also be converted all at once.
The conversion also updates the comment from dsa_port_supports_hwtstamp(),
which is no longer true because kernel_hwtstamp_config is kernel memory
and does not need copy_to_user(). I've deliberated whether it is
necessary to also update "err != -EOPNOTSUPP" to a more general "!err",
but all drivers now either return 0 or -EOPNOTSUPP.
The existing logic from the ocelot_ioctl() function, to avoid
configuring timestamping if the PHY supports the operation, is obsoleted
by more advanced core logic in dev_set_hwtstamp_phylib().
This is only a partial preparation for proper PHY timestamping support.
None of these switch driver currently sets up PTP traps for PHY
timestamping, so setting dev->see_all_hwtstamp_requests is not yet
necessary and the conversion is relatively trivial.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # felix, sja1105, mv88e6xxx
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508095236.887789-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
requested
Symmetric RSS hash requires that:
* No other fields besides IP src/dst and/or L4 src/dst are set
* If src is set, dst must also be set
This restriction was only enforced when RXNFC was configured after
symmetric hash was enabled. In the opposite order of operations (RXNFC
then symmetric enablement) the check was not performed.
Perform the sanity check on set_rxfh as well, by iterating over all flow
types hash fields and making sure they are all symmetric.
Introduce a function that returns whether a flow type is hashable (not
spec only) and needs to be iterated over. To make sure that no one
forgets to update the list of hashable flow types when adding new flow
types, a static assert is added to draw the developer's attention.
The conversion of uapi #defines to enum is not ideal, but as Jakub
mentioned [1], we have precedent for that.
[1] https://lore.kernel.org/netdev/20250324073509.6571ade3@kernel.org/
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508103034.885536-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mctp_flow_prepare_output() is called in mctp_route_output(), which
places outbound packets onto a given interface. The packet may represent
a message fragment, in which case we provoke an unbalanced reference
count to the underlying device. This causes trouble if we ever attempt
to remove the interface:
[ 48.702195] usb 1-1: USB disconnect, device number 2
[ 58.883056] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
[ 69.022548] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
[ 79.172568] unregister_netdevice: waiting for mctpusb0 to become free. Usage count = 2
...
Predicate the invocation of mctp_dev_set_key() in
mctp_flow_prepare_output() on not already having associated the device
with the key. It's not yet realistic to uphold the property that the key
maintains only one device reference earlier in the transmission sequence
as the route (and therefore the device) may not be known at the time the
key is associated with the socket.
Fixes: 67737c457281 ("mctp: Pass flow data & flow release events to drivers")
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://patch.msgid.link/20250508-mctp-dev-refcount-v1-1-d4f965c67bb5@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mctp_dump_addrinfo, ifa_index can be used to filter interfaces, but
only when the struct ifaddrmsg is provided. Otherwise it will be
comparing to uninitialised memory - reproducible in the syzkaller case from
dhcpd, or busybox "ip addr show".
The kernel MCTP implementation has always filtered by ifa_index, so
existing userspace programs expecting to dump MCTP addresses must
already be passing a valid ifa_index value (either 0 or a real index).
BUG: KMSAN: uninit-value in mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128
mctp_dump_addrinfo+0x208/0xac0 net/mctp/device.c:128
rtnl_dump_all+0x3ec/0x5b0 net/core/rtnetlink.c:4380
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6824
netlink_dump+0x97b/0x1690 net/netlink/af_netlink.c:2309
Fixes: 583be982d934 ("mctp: Add device handling and netlink interface")
Reported-by: syzbot+e76d52dadc089b9d197f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68135815.050a0220.3a872c.000e.GAE@google.com/
Reported-by: syzbot+1065a199625a388fce60@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/681357d6.050a0220.14dd7d.000d.GAE@google.com/
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250508-mctp-addr-dump-v2-1-c8a53fd2dd66@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
if it works under NMI and doesn't use any context-dependent things,
should be fine for any program type. The detailed discussion is in [1].
[1] https://lore.kernel.org/all/CAEf4Bza6gK3dsrTosk6k3oZgtHesNDSrDd8sdeQ-GiS6oJixQg@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20250506061434.94277-2-yangfeng59949@163.com
|
|
Previously, when reducing a qdisc's limit via the ->change() operation, only
the main skb queue was trimmed, potentially leaving packets in the gso_skb
list. This could result in NULL pointer dereference when we only check
sch->limit against sch->q.qlen.
This patch introduces a new helper, qdisc_dequeue_internal(), which ensures
both the gso_skb list and the main queue are properly flushed when trimming
excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie)
are updated to use this helper in their ->change() routines.
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM")
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme")
Reported-by: Will <willsroot@protonmail.com>
Reported-by: Savy <savy@syst3mfailure.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
- hci_event: Fix not using key encryption size when its known
* tag 'for-net-2025-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Fix not using key encryption size when its known
Bluetooth: MGMT: Fix MGMT_OP_ADD_DEVICE invalid device flags
====================
Link: https://patch.msgid.link/20250508150927.385675-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When processing a PREQ the code would always check whether we have a
mesh path locally and reply accordingly. However, when forwarding is
disabled then we should not reply with this information as we will not
forward data packets down that path.
Move the check for dot11MeshForwarding up in the function and skip the
mesh path lookup in that case. In the else block, set forward to false
so that the rest of the function becomes a no-op and the
dot11MeshForwarding check does not need to be duplicated.
This explains an effect observed in the Freifunk community where mesh
forwarding is disabled. In that case a mesh with three STAs and only bad
links in between them, individual STAs would occionally have indirect
mpath entries. This should not have happened.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Reviewed-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://patch.msgid.link/20250430191042.3287004-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc6).
No conflicts.
Adjacent changes:
net/core/dev.c:
08e9f2d584c4 ("net: Lock netdevices during dev_shutdown")
a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes the regression introduced by 50c1241e6a8a ("Bluetooth: l2cap:
Check encryption key size on incoming connection") introduced a check for
l2cap_check_enc_key_size which checks for hcon->enc_key_size which may
not be initialized if HCI_OP_READ_ENC_KEY_SIZE is still pending.
If the key encryption size is known, due previously reading it using
HCI_OP_READ_ENC_KEY_SIZE, then store it as part of link_key/smp_ltk
structures so the next time the encryption is changed their values are
used as conn->enc_key_size thus avoiding the racing against
HCI_OP_READ_ENC_KEY_SIZE.
Now that the enc_size is stored as part of key the information the code
then attempts to check that there is no downgrade of security if
HCI_OP_READ_ENC_KEY_SIZE returns a value smaller than what has been
previously stored.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220061
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220063
Fixes: 522e9ed157e3 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
