| Age | Commit message (Collapse) | Author |
|---|
|
The forcedeth changes had a conflict with the conversion over
to atomic u64 statistics in net-next.
The libertas cfg.c code had a conflict with the bss reference
counting fix by John Linville in net-next.
Conflicts:
drivers/net/ethernet/nvidia/forcedeth.c
drivers/net/wireless/libertas/cfg.c
|
|
This patch tries to fix the following issue in netfilter:
In ip_route_me_harder(), we invoke pskb_expand_head() that
rellocates new header with additional head room which can break
the alignment of the original packet header.
In one of my NAT test case, the NIC port for internal hosts is
configured with vlan and the port for external hosts is with
general configuration. If we ping an external "unknown" hosts from an
internal host, an icmp packet will be sent. We find that in
icmp_send()->...->ip_route_me_harder()->pskb_expand_head(), hh_len=18
and current headroom (skb_headroom(skb)) of the packet is 16. After
calling pskb_expand_head() the packet header becomes to be unaligned
and then our system (arch/tile) panics immediately.
Signed-off-by: Paul Guo <ggang@tilera.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
warning: 'ip_to' may be used uninitialized in this function
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use queue instead of stack discipline for device list. When processing
dev_list with list_for_each* devices will be prosessed in order they
were added (Usually BR/EDR first and AMP later).
Also output from hciconfig looks nicer :-)
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
|
|
Low Energy (LE) pairing responses must be recognized and handled
differently from BR/EDR pairing responses. BR/EDR responses are
handled via HCI commands by the LMP layer, and LE responses are
handled by the Host.
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
|
|
There are 4 possible User Responses to pairing requests,
and they all share the same checks and handling. This
restructures the handling of the two Confirm responses
in preperation for the second two.
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
|
|
Fixes bluetooth compiling when CONFIG_BT_L2CAP is not enabled
net/built-in.o: In function `hci_dev_open':
(.text+0xdce9a): undefined reference to `enable_hs'
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
|
|
We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise,
this call may cleanup our module before it returns.
Gladly, the kthread API provides a simple wrapper for us. So lets use
module_put_and_exit() to avoid a race condition with the module cleanup code.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
|
|
We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise,
this call may cleanup our module before it returns.
Gladly, the kthread API provides a simple wrapper for us. So lets use
module_put_and_exit() to avoid a race condition with the module cleanup code.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
|
|
When entering softif_create(), the rtnl lock has already been acquired
by store_mesh_iface().
(store_mesh_iface() -> hardif_enable_interface() -> softif_create)
In case of an error, we should therefore call unregister_netdevice()
instead of unregister_netdev().
unregister_netdev() tries to acquire the rtnl lock itself and deadlocks
in this situation. unregister_netdevice() assumes that the rtnl lock
is already been held.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
if hash_add() fails, we should remove the structure to avoid memory
leaks.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The tt_local_reset_flags() is actually used for one use case only. It is not
generalised enough to be used indifferent situations. This patch make it general
enough in order to let other code use it whenever a flag set is requested over
the whole hash table (passed as parameter). The function is now called
tt_set_flags()
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The check for new packets in the future used a wrong binary operator,
which makes the check expression always true and accepting too many
packets.
Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Several functions in the translation table management code assume that the
tt_global_entry and tt_local_entry structures have the same initial fields such
as 'addr' and 'hash_entry'. To improve the code readability and to avoid
mistakes in later changes, a common substructure that substitute the shared
fields has been introduced (struct tt_common_entry).
Thanks to this modification, it has also been possible to slightly reduce the
code length by merging some functions like compare_ltt/gtt() and
tt_local/global_hash_find()
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Before accessing the TT_RESPONSE packet payload, the node has to ensure that the
packet is long enough as it would expect to be.
Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
The TT_RESPONSE skb has to be linearised only if the node plans to access the
packet payload (so only if the message is directed to that node). In all the
other cases the node can avoid this memory operation
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When the translation tables (global and local) are written for debugfs,
it is not neccesary to allocate a buffer, we can directly use
seq_printf() to print them out.
This might actually be safer if the table changes between size
calculation and traversal, and we can't estimate the required size
wrong.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
There are two reasons for this fix:
- the result of choose_orig() and vis_choose() is an index and therefore it can't
be negative. Hence it is correct to make the return type unsigned too.
- sizeof(int) may not be the same on ALL the architectures. Since we plan to use
choose_orig() as DHT hash function, we need to guarantee that, given the same
argument, the result is the same. Then it is correct to explicitly express
the size of the return type (and the second argument). Since the expected
length is currently 4, uint32_t is the most convenient choice.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
get_orig_node() tries to retrieve an orig_node object based on a mac address
and creates it if not present. This is not the wanted behaviour in the
translation table code as we don't want to create new orig_code objects but
expect a NULL pointer if the object does not exist.
Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
strict_strto<foo> is obsolete since v3.1-rc8-8466-g14acc55 and should be
replaced with kstrto<foo>.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
When deleting the entries, tt_global_del_orig() has to print the message passed
as argument instead of a static one.
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
Signed-off-by: Sven Eckelmann <sven@narfation.org>
|
|
commit f39925dbde77 (ipv4: Cache learned redirect information in
inetpeer.) introduced a regression in ICMP redirect handling.
It assumed ipv4_dst_check() would be called because all possible routes
were attached to the inetpeer we modify in ip_rt_redirect(), but thats
not true.
commit 7cc9150ebe (route: fix ICMP redirect validation) tried to fix
this but solution was not complete. (It fixed only one route)
So we must lookup existing routes (including different TOS values) and
call check_peer_redir() on them.
Reported-by: Ivan Zahariev <famzah@icdsoft.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ping module incorrectly increments ICMP_MIB_INERRORS if feeded with a
frame not belonging to its own sockets.
RFC 2011 states that ICMP_MIB_INERRORS should count "the number of ICMP
messages which the entiry received but determined as having
ICMP-specific errors (bad ICMP checksums, bad length, etc.)."
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Flavio Leitner <fbl@redhat.com>
Acked-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This provides flexibility to set the pipe handle
using setsockopt. The pipe can be enabled (if disabled) later
using ioctl.
Signed-off-by: Hemant Ramdasi <hemant.ramdasi@stericsson.com>
Signed-off-by: Dinesh Kumar Sharma <dinesh.sharma@stericsson.com>
Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip_gre: Set needed_headroom dynamically again
Now that all needed_headroom users have been fixed up so that
we can safely increase needed_headroom, this patch restore the
dynamic update of needed_headroom.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
packet: Add needed_tailroom to packet_sendmsg_spkt
While auditing LL_ALLOCATED_SPACE I noticed that packet_sendmsg_spkt
did not include needed_tailroom when allocating an skb. This isn't
a fatal error as we should always tolerate inadequate tail room but
it isn't optimal.
This patch fixes that.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
net: Remove all uses of LL_ALLOCATED_SPACE
The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the
alignment to the sum of needed_headroom and needed_tailroom. As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.
This patch replaces all uses of LL_ALLOCATED_SPACE with the macro
LL_RESERVED_SPACE and direct reference to needed_tailroom.
This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipv6: Remove all uses of LL_ALLOCATED_SPACE
The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the
alignment to the sum of needed_headroom and needed_tailroom. As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.
This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv6
with the macro LL_RESERVED_SPACE and direct reference to
needed_tailroom.
This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipv4: Remove all uses of LL_ALLOCATED_SPACE
The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the
alignment to the sum of needed_headroom and needed_tailroom. As
the amount that is then reserved for head room is needed_headroom
with alignment, this means that the tail room left may be too small.
This patch replaces all uses of LL_ALLOCATED_SPACE in net/ipv4
with the macro LL_RESERVED_SPACE and direct reference to
needed_tailroom.
This also fixes the problem with needed_headroom changing between
allocating the skb and reserving the head room.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most machines dont use RPS/RFS, and pay a fair amount of instructions in
netif_receive_skb() / netif_rx() / get_rps_cpu() just to discover
RPS/RFS is not setup.
Add a jump_label named rps_needed.
If no device rps_map or global rps_sock_flow_table is setup,
netif_receive_skb() / netif_rx() do a single instruction instead of many
ones, including conditional jumps.
jmp +0 (if CONFIG_JUMP_LABEL=y)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers (e.g. ath9k) assume that it's safe to go into low-power mode
immediately after the idle state changes. To support that, mac80211 even
calls drv_flush() before that happens.
In some instances, mac80211 sent a packet right after recalculating the
idle state, this patch fixes that.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Remove unused function parameters in the following functions:
minstrel_calc_rate_ewma()
minstrel_ht_calc_tp()
minstrel_aggr_check()
minstrel_ht_set_rate()
Signed-off-by: Patrick Kelle <patrick.kelle81@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
We recently introduced a return here, but we need to call kfree
first.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
sk_buff structs should be freed using kfree_skb().
This was introduced recently in 029458212 "mac80211: Save probe
response data for bss".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
Finding the group index for a specific rate is done by looping through
all groups and returning if the correct one is found. This code is
called for each tx'ed frame and thus it makes sense to reduce its
runtime.
Do this by calculating the group index by this formula based on the SGI
and HT40 flags as well as the stream number:
idx = (HT40 * 2 * MINSTREL_MAX_STREAMS) +
(SGI * MINSTREL_MAX_STREAMS) +
(streams - 1)
Hence, the groups are ordered by th HT40 flag first, then by the SGI
flag and afterwards by the number of used streams.
This should reduce the runtime of minstrel_ht_get_group_idx
considerable.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The drivers are not required to fill in rate->count if rate->idx is set
to -1. Hence, we should first check rate->idx before accessing
rate->count.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
The shared key authentication frame that needs to be
encrypted (the third one in the shared key handshake)
is directly encrypted in ieee80211_send_auth and the
IEEE80211_TX_INTFL_DONT_ENCRYPT is set. All others
are not encrypted, so the only way to get to this is
erroneously on no-monitor AP side.
Remove the special case for authentication frames to
fix the AP shared key side when operating without
cooked monitor interfaces -- with cooked monitor the
IEEE80211_TX_INTFL_DONT_ENCRYPT also gets set, so we
never get here -- an AP never encrypts auth frames.
Without this patch, an AP operating in WEP mode with
my no-monitor patches would erroneously encrypt all
authentication frames, instead of none.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
include/net/bluetooth/bluetooth.h
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes a crash when non existing IPv6 route is tried to be changed.
When new destination node was inserted in middle of FIB6 tree, no relevant
sanity checks were performed. Later route insertion might have been prevented
due to invalid request, causing node with no rt info being left in tree.
When this node was accessed, a crash occurred.
Patch adds missing checks in fib6_add_1()
Signed-off-by: Matti Vaittinen <Mazziesaccount@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the /sys/class/net/DEV/queues/Q/tx_timeout attribute
containing the total number of timeout events on the given queue. It
is always available with CONFIG_SYSFS, independently of
CONFIG_RPS/XPS.
Credits to Stephen Hemminger for a preliminary version of this patch.
Tested:
without CONFIG_SYSFS (compilation only)
with sysfs and without CONFIG_RPS & CONFIG_XPS
with sysfs and without CONFIG_RPS
with sysfs and without CONFIG_XPS
with defaults
Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit fixes following warning:
net/core/net-sysfs.c:921:6: warning: symbol 'numa_node' shadows an earlier one
include/linux/topology.h:222:1: originally declared here
Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing spaces around multiplication operator.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb()
in lowpan_fragment_xmit() is a double free.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be
enabled by default. The check heuristics is altered a bit here,
so it hits other people than before. The default shouldn't be
trusted for performance-critical cases anyway.
For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
v2: changed loop in ethtool_set_features() per Ben's suggestion
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
