summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-01-13rxrpc: Call state should be read with READ_ONCE() under some circumstancesBaptiste Lepers
The call state may be changed at any time by the data-ready routine in response to received packets, so if the call state is to be read and acted upon several times in a function, READ_ONCE() must be used unless the call state lock is held. As it happens, we used READ_ONCE() to read the state a few lines above the unmarked read in rxrpc_input_data(), so use that value rather than re-reading it. Fixes: a158bdd3247b ("rxrpc: Fix call timeouts") Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/161046715522.2450566.488819910256264150.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13rxrpc: Fix handling of an unsupported token type in rxrpc_read()David Howells
Clang static analysis reports the following: net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined toksize = toksizes[tok++]; ^ ~~~~~~~~~~~~~~~ rxrpc_read() contains two consecutive loops. The first loop calculates the token sizes and stores the results in toksizes[] and the second one uses the array. When there is an error in identifying the token in the first loop, the token is skipped, no change is made to the toksizes[] array. When the same error happens in the second loop, the token is not skipped. This will cause the toksizes[] array to be out of step and will overrun past the calculated sizes. Fix this by making both loops log a message and return an error in this case. This should only happen if a new token type is incompletely implemented, so it should normally be impossible to trigger this. Fixes: 9a059cd5ca7d ("rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()") Reported-by: Tom Rix <trix@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/161046503122.2445787.16714129930607546635.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-13SUNRPC: Move the svc_xdr_recvfrom tracepoint againChuck Lever
Commit 156708adf2d9 ("SUNRPC: Move the svc_xdr_recvfrom() tracepoint") tried to capture the correct XID in the trace record, but this line in svc_recv: rqstp->rq_xid = svc_getu32(&rqstp->rq_arg.head[0]); alters the size of rq_arg.head[0].iov_len. The tracepoint records the correct XID but an incorrect value for the length of the xdr_buf's head. To keep the trace callsites simple, I've created two trace classes. One assumes the xdr_buf contains a full RPC message, and the XID can be extracted from it. The other assumes the contents of the xdr_buf are arbitrary, and the xid will be provided by the caller. Currently there is only one user of each class, but I expect we will need a few more tracepoints using each class as time goes on. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Pass conntrack -f to specify family in netfilter conntrack helper selftests, from Chen Yi. 2) Honor hashsize modparam from nf_conntrack_buckets sysctl, from Jesper D. Brouer. 3) Fix memleak in nf_nat_init() error path, from Dinghao Liu. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nf_nat: Fix memleak in nf_nat_init netfilter: conntrack: fix reading nf_conntrack_buckets selftests: netfilter: Pass family parameter "-f" to conntrack tool ==================== Link: https://lore.kernel.org/r/20210112222033.9732-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net/smc: use memcpy instead of snprintf to avoid out of bounds readGuvenc Gulce
Using snprintf() to convert not null-terminated strings to null terminated strings may cause out of bounds read in the source string. Therefore use memcpy() and terminate the target string with a null afterwards. Fixes: a3db10efcc4c ("net/smc: Add support for obtaining SMCR device list") Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12smc: fix out of bound access in smc_nl_get_sys_info()Jakub Kicinski
smc_clc_get_hostname() sets the host pointer to a buffer which is not NULL-terminated (see smc_clc_init()). Reported-by: syzbot+f4708c391121cfc58396@syzkaller.appspotmail.com Fixes: 099b990bd11a ("net/smc: Add support for obtaining system information") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12hci: llc_shdlc: style: Simplify bool comparisonYANG LI
Fix the following coccicheck warning: ./net/nfc/hci/llc_shdlc.c:239:5-21: WARNING: Comparison to bool Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci Robot<abaci@linux.alibaba.com> Link: https://lore.kernel.org/r/1610357063-57705-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dsa: add optional stats64 supportOleksij Rempel
Allow DSA drivers to export stats64 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12mptcp: better msk-level shutdown.Paolo Abeni
Instead of re-implementing most of inet_shutdown, re-use such helper, and implement the MPTCP-specific bits at the 'proto' level. The msk-level disconnect() can now be invoked, lets provide a suitable implementation. As a side effect, this fixes bad state management for listener sockets. The latter could lead to division by 0 oops since commit ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling"). Fixes: 43b54c6ee382 ("mptcp: Use full MPTCP-level disconnect state machine") Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12mptcp: more strict state checking for acksPaolo Abeni
Syzkaller found a way to trigger division by zero in mptcp_subflow_cleanup_rbuf(). The current checks implemented into tcp_can_send_ack() are too week, let's be more accurate. Reported-by: Christoph Paasch <cpaasch@apple.com> Fixes: ea4ca586b16f ("mptcp: refine MPTCP-level ack scheduling") Fixes: fd8976790a6c ("mptcp: be careful on MPTCP-level ack.") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dsa: clear devlink port type before unregistering slave netdevsVladimir Oltean
Florian reported a use-after-free bug in devlink_nl_port_fill found with KASAN: (devlink_nl_port_fill) (devlink_port_notify) (devlink_port_unregister) (dsa_switch_teardown.part.3) (dsa_tree_teardown_switches) (dsa_unregister_switch) (bcm_sf2_sw_remove) (platform_remove) (device_release_driver_internal) (device_links_unbind_consumers) (device_release_driver_internal) (device_driver_detach) (unbind_store) Allocated by task 31: alloc_netdev_mqs+0x5c/0x50c dsa_slave_create+0x110/0x9c8 dsa_register_switch+0xdb0/0x13a4 b53_switch_register+0x47c/0x6dc bcm_sf2_sw_probe+0xaa4/0xc98 platform_probe+0x90/0xf4 really_probe+0x184/0x728 driver_probe_device+0xa4/0x278 __device_attach_driver+0xe8/0x148 bus_for_each_drv+0x108/0x158 Freed by task 249: free_netdev+0x170/0x194 dsa_slave_destroy+0xac/0xb0 dsa_port_teardown.part.2+0xa0/0xb4 dsa_tree_teardown_switches+0x50/0xc4 dsa_unregister_switch+0x124/0x250 bcm_sf2_sw_remove+0x98/0x13c platform_remove+0x44/0x5c device_release_driver_internal+0x150/0x254 device_links_unbind_consumers+0xf8/0x12c device_release_driver_internal+0x84/0x254 device_driver_detach+0x30/0x34 unbind_store+0x90/0x134 What happens is that devlink_port_unregister emits a netlink DEVLINK_CMD_PORT_DEL message which associates the devlink port that is getting unregistered with the ifindex of its corresponding net_device. Only trouble is, the net_device has already been unregistered. It looks like we can stub out the search for a corresponding net_device if we clear the devlink_port's type. This looks like a bit of a hack, but also seems to be the reason why the devlink_port_type_clear function exists in the first place. Fixes: 3122433eb533 ("net: dsa: Register devlink ports before calling DSA driver setup()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian fainelli <f.fainelli@gmail.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210112004831.3778323-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dsa: unbind all switches from tree when DSA master unbindsVladimir Oltean
Currently the following happens when a DSA master driver unbinds while there are DSA switches attached to it: $ echo 0000:00:00.5 > /sys/bus/pci/drivers/mscc_felix/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 392 at net/core/dev.c:9507 Call trace: rollback_registered_many+0x5fc/0x688 unregister_netdevice_queue+0x98/0x120 dsa_slave_destroy+0x4c/0x88 dsa_port_teardown.part.16+0x78/0xb0 dsa_tree_teardown_switches+0x58/0xc0 dsa_unregister_switch+0x104/0x1b8 felix_pci_remove+0x24/0x48 pci_device_remove+0x48/0xf0 device_release_driver_internal+0x118/0x1e8 device_driver_detach+0x28/0x38 unbind_store+0xd0/0x100 Located at the above location is this WARN_ON: /* Notifier chain MUST detach us all upper devices. */ WARN_ON(netdev_has_any_upper_dev(dev)); Other stacked interfaces, like VLAN, do indeed listen for NETDEV_UNREGISTER on the real_dev and also unregister themselves at that time, which is clearly the behavior that rollback_registered_many expects. But DSA interfaces are not VLAN. They have backing hardware (platform devices, PCI devices, MDIO, SPI etc) which have a life cycle of their own and we can't just trigger an unregister from the DSA framework when we receive a netdev notifier that the master unregisters. Luckily, there is something we can do, and that is to inform the driver core that we have a runtime dependency to the DSA master interface's device, and create a device link where that is the supplier and we are the consumer. Having this device link will make the DSA switch unbind before the DSA master unbinds, which is enough to avoid the WARN_ON from rollback_registered_many. Note that even before the blamed commit, DSA did nothing intelligent when the master interface got unregistered either. See the discussion here: https://lore.kernel.org/netdev/20200505210253.20311-1-f.fainelli@gmail.com/ But this time, at least the WARN_ON is loud enough that the upper_dev_link commit can be blamed. The advantage with this approach vs dev_hold(master) in the attached link is that the latter is not meant for long term reference counting. With dev_hold, the only thing that will happen is that when the user attempts an unbind of the DSA master, netdev_wait_allrefs will keep waiting and waiting, due to DSA keeping the refcount forever. DSA would not access freed memory corresponding to the master interface, but the unbind would still result in a freeze. Whereas with device links, graceful teardown is ensured. It even works with cascaded DSA trees. $ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind [ 1818.797546] device swp0 left promiscuous mode [ 1819.301112] sja1105 spi2.0: Link is Down [ 1819.307981] DSA: tree 1 torn down [ 1819.312408] device eno2 left promiscuous mode [ 1819.656803] mscc_felix 0000:00:00.5: Link is Down [ 1819.667194] DSA: tree 0 torn down [ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down This approach allows us to keep the DSA framework absolutely unchanged, and the driver core will just know to unbind us first when the master goes away - as opposed to the large (and probably impossible) rework required if attempting to listen for NETDEV_UNREGISTER. As per the documentation at Documentation/driver-api/device_link.rst, specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link to be automatically purged when the consumer fails to probe or later unbinds. So we don't need to keep the consumer_link variable in struct dsa_switch. Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210111230943.3701806-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12net: dcb: Accept RTM_GETDCB messages carrying set-like DCB commandsPetr Machata
In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler"), Linux started rejecting RTM_GETDCB netlink messages if they contained a set-like DCB_CMD_ command. The reason was that privileges were only verified for RTM_SETDCB messages, but the value that determined the action to be taken is the command, not the message type. And validation of message type against the DCB command was the obvious missing piece. Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool for configuration of DCB, accesses the DCB set-like APIs through RTM_GETDCB. Therefore do not bounce the discrepancy between message type and command. Instead, in addition to validating privileges based on the actual message type, validate them also based on the expected message type. This closes the loophole of allowing DCB configuration on non-admin accounts, while maintaining backward compatibility. Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler") Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-12bpf: Allow to retrieve sol_socket opts from sock_addr progsDaniel Borkmann
The _bpf_setsockopt() is able to set some of the SOL_SOCKET level options, however, _bpf_getsockopt() has little support to actually retrieve them. This small patch adds few misc options such as SO_MARK, SO_PRIORITY and SO_BINDTOIFINDEX. For the latter getter and setter are added. The mark and priority in particular allow to retrieve the options from BPF cgroup hooks to then implement custom behavior / settings on the syscall hooks compared to other sockets that stick to the defaults, for example. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/cba44439b801e5ddc1170e5be787f4dc93a2d7f9.1610406333.git.daniel@iogearbox.net
2021-01-12Merge tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client fixes from Trond Myklebust: "Highlights include: - Fix parsing of link-local IPv6 addresses - Fix confusing logging of mount errors that was introduced by the fsopen() patchset. - Fix a tracing use after free in _nfs4_do_setlk() - Layout return-on-close fixes when called from nfs4_evict_inode() - Layout segments were being leaked in pnfs_generic_clear_request_commit() - Don't leak DS commits in pnfs_generic_retry_commit() - Fix an Oopsable use-after-free when nfs_delegation_find_inode_server() calls iput() on an inode after the super block has gone away" * tag 'nfs-for-5.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: nfs_igrab_and_active must first reference the superblock NFS: nfs_delegation_find_inode_server must first reference the superblock NFS/pNFS: Fix a leak of the layout 'plh_outstanding' counter NFS/pNFS: Don't leak DS commits in pnfs_generic_retry_commit() NFS/pNFS: Don't call pnfs_free_bucket_lseg() before removing the request pNFS: Stricter ordering of layoutget and layoutreturn pNFS: Clean up pnfs_layoutreturn_free_lsegs() pNFS: We want return-on-close to complete when evicting the inode pNFS: Mark layout for return if return-on-close was not sent net: sunrpc: interpret the return value of kstrtou32 correctly NFS: Adjust fs_context error logging NFS4: Fix use-after-free in trace_event_raw_event_nfs4_set_lock
2021-01-11esp: avoid unneeded kmap_atomic callWillem de Bruijn
esp(6)_output_head uses skb_page_frag_refill to allocate a buffer for the esp trailer. It accesses the page with kmap_atomic to handle highmem. But skb_page_frag_refill can return compound pages, of which kmap_atomic only maps the first underlying page. skb_page_frag_refill does not return highmem, because flag __GFP_HIGHMEM is not set. ESP uses it in the same manner as TCP. That also does not call kmap_atomic, but directly uses page_address, in skb_copy_to_page_nocache. Do the same for ESP. This issue has become easier to trigger with recent kmap local debugging feature CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: compound page support in skb_seq_readWillem de Bruijn
skb_seq_read iterates over an skb, returning pointer and length of the next data range with each call. It relies on kmap_atomic to access highmem pages when needed. An skb frag may be backed by a compound page, but kmap_atomic maps only a single page. There are not enough kmap slots to always map all pages concurrently. Instead, if kmap_atomic is needed, iterate over each page. As this increases the number of calls, avoid this unless needed. The necessary condition is captured in skb_frag_must_loop. I tried to make the change as obvious as possible. It should be easy to verify that nothing changes if skb_frag_must_loop returns false. Tested: On an x86 platform with CONFIG_HIGHMEM=y CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y CONFIG_NETFILTER_XT_MATCH_STRING=y Run ip link set dev lo mtu 1500 iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT dd if=/dev/urandom of=in bs=1M count=20 nc -l -p 8000 > /dev/null & nc -w 1 -q 0 localhost 8000 < in Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: dsa: remove obsolete comments about switchdev transactionsVladimir Oltean
Now that all port object notifiers were converted to be non-transactional, we can remove the comments that say otherwise. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: dsa: remove the transactional logic from VLAN objectsVladimir Oltean
It should be the driver's business to logically separate its VLAN offloading into a preparation and a commit phase, and some drivers don't need / can't do this. So remove the transactional shim from DSA and let drivers propagate errors directly from the .port_vlan_add callback. It would appear that the code has worse error handling now than it had before. DSA is the only in-kernel user of switchdev that offloads one switchdev object to more than one port: for every VLAN object offloaded to a user port, that VLAN is also offloaded to the CPU port. So the "prepare for user port -> check for errors -> prepare for CPU port -> check for errors -> commit for user port -> commit for CPU port" sequence appears to make more sense than the one we are using now: "offload to user port -> check for errors -> offload to CPU port -> check for errors", but it is really a compromise. In the new way, we can catch errors from the commit phase that we previously had to ignore. But we have our hands tied and cannot do any rollback now: if we add a VLAN on the CPU port and it fails, we can't do the rollback by simply deleting it from the user port, because the switchdev API is not so nice with us: it could have simply been there already, even with the same flags. So we don't even attempt to rollback anything on addition error, just leave whatever VLANs managed to get offloaded right where they are. This should not be a problem at all in practice. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: dsa: remove the transactional logic from MDB entriesVladimir Oltean
For many drivers, the .port_mdb_prepare callback was not a good opportunity to avoid any error condition, and they would suppress errors found during the actual commit phase. Where a logical separation between the prepare and the commit phase existed, the function that used to implement the .port_mdb_prepare callback still exists, but now it is called directly from .port_mdb_add, which was modified to return an int code. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Wallei <linus.walleij@linaro.org> # RTL8366 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: dsa: remove the transactional logic from ageing time notifiersVladimir Oltean
Remove the shim introduced in DSA for offloading the bridge ageing time from switchdev, by first checking whether the ageing time is within the range limits requested by the driver. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: remove the transaction structure from port attributesVladimir Oltean
Since the introduction of the switchdev API, port attributes were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port attribute notifier structures, and converts drivers to not look at this member. In part, this patch contains a revert of my previous commit 2e554a7a5d8a ("net: dsa: propagate switchdev vlan_filtering prepare phase to drivers"). For the most part, the conversion was trivial except for: - Rocker's world implementation based on Broadcom OF-DPA had an odd implementation of ofdpa_port_attr_bridge_flags_set. The conversion was done mechanically, by pasting the implementation twice, then only keeping the code that would get executed during prepare phase on top, then only keeping the code that gets executed during the commit phase on bottom, then simplifying the resulting code until this was obtained. - DSA's offloading of STP state, bridge flags, VLAN filtering and multicast router could be converted right away. But the ageing time could not, so a shim was introduced and this was left for a further commit. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Linus Walleij <linus.walleij@linaro.org> # RTL8366RB Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: delete switchdev_port_obj_add_nowVladimir Oltean
After the removal of the transactional model inside switchdev_port_obj_add_now, it has no added value and we can just call switchdev_port_obj_notify directly, bypassing this function. Let's delete it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: remove the transaction structure from port object notifiersVladimir Oltean
Since the introduction of the switchdev API, port objects were transmitted to drivers for offloading using a two-step transactional model, with a prepare phase that was supposed to catch all errors, and a commit phase that was supposed to never fail. Some classes of failures can never be avoided, like hardware access, or memory allocation. In the latter case, merely attempting to move the memory allocation to the preparation phase makes it impossible to avoid memory leaks, since commit 91cf8eceffc1 ("switchdev: Remove unused transaction item queue") which has removed the unused mechanism of passing on the allocated memory between one phase and another. It is time we admit that separating the preparation from the commit phase is something that is best left for the driver to decide, and not something that should be baked into the API, especially since there are no switchdev callers that depend on this. This patch removes the struct switchdev_trans member from switchdev port object notifier structures, and converts drivers to not look at this member. Where driver conversion is trivial (like in the case of the Marvell Prestera driver, NXP DPAA2 switch, TI CPSW, and Rocker drivers), it is done in this patch. Where driver conversion needs more attention (DSA, Mellanox Spectrum), the conversion is left for subsequent patches and here we only fake the prepare/commit phases at a lower level, just not in the switchdev notifier itself. Where the code has a natural structure that is best left alone as a preparation and a commit phase (as in the case of the Ocelot switch), that structure is left in place, just made to not depend upon the switchdev transactional model. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11net: switchdev: remove vid_begin -> vid_end range from VLAN objectsVladimir Oltean
The call path of a switchdev VLAN addition to the bridge looks something like this today: nbp_vlan_init | __br_vlan_set_default_pvid | | | | | br_afspec | | | | | | | v | | | br_process_vlan_info | | | | | | | v | | | br_vlan_info | | | / \ / | | / \ / | | / \ / | | / \ / v v v v v nbp_vlan_add br_vlan_add ------+ | ^ ^ | | | / | | | | / / / | \ br_vlan_get_master/ / v \ ^ / / br_vlan_add_existing \ | / / | \ | / / / \ | / / / \ | / / / \ | / / / v | | v / __vlan_add / / | / / | / v | / __vlan_vid_add | / \ | / v v v br_switchdev_port_vlan_add The ranges UAPI was introduced to the bridge in commit bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") (Jan 10 2015). But the VLAN ranges (parsed in br_afspec) have always been passed one by one, through struct bridge_vlan_info tmp_vinfo, to br_vlan_info. So the range never went too far in depth. Then Scott Feldman introduced the switchdev_port_bridge_setlink function in commit 47f8328bb1a4 ("switchdev: add new switchdev bridge setlink"). That marked the introduction of the SWITCHDEV_OBJ_PORT_VLAN, which made full use of the range. But switchdev_port_bridge_setlink was called like this: br_setlink -> br_afspec -> switchdev_port_bridge_setlink Basically, the switchdev and the bridge code were not tightly integrated. Then commit 41c498b9359e ("bridge: restore br_setlink back to original") came, and switchdev drivers were required to implement .ndo_bridge_setlink = switchdev_port_bridge_setlink for a while. In the meantime, commits such as 0944d6b5a2fa ("bridge: try switchdev op first in __vlan_vid_add/del") finally made switchdev penetrate the br_vlan_info() barrier and start to develop the call path we have today. But remember, br_vlan_info() still receives VLANs one by one. Then Arkadi Sharshevsky refactored the switchdev API in 2017 in commit 29ab586c3d83 ("net: switchdev: Remove bridge bypass support from switchdev") so that drivers would not implement .ndo_bridge_setlink any longer. The switchdev_port_bridge_setlink also got deleted. This refactoring removed the parallel bridge_setlink implementation from switchdev, and left the only switchdev VLAN objects to be the ones offloaded from __vlan_vid_add (basically RX filtering) and __vlan_add (the latter coming from commit 9c86ce2c1ae3 ("net: bridge: Notify about bridge VLANs")). That is to say, today the switchdev VLAN object ranges are not used in the kernel. Refactoring the above call path is a bit complicated, when the bridge VLAN call path is already a bit complicated. Let's go off and finish the job of commit 29ab586c3d83 by deleting the bogus iteration through the VLAN ranges from the drivers. Some aspects of this feature never made too much sense in the first place. For example, what is a range of VLANs all having the BRIDGE_VLAN_INFO_PVID flag supposed to mean, when a port can obviously have a single pvid? This particular configuration _is_ denied as of commit 6623c60dc28e ("bridge: vlan: enforce no pvid flag in vlan ranges"), but from an API perspective, the driver still has to play pretend, and only offload the vlan->vid_end as pvid. And the addition of a switchdev VLAN object can modify the flags of another, completely unrelated, switchdev VLAN object! (a VLAN that is PVID will invalidate the PVID flag from whatever other VLAN had previously been offloaded with switchdev and had that flag. Yet switchdev never notifies about that change, drivers are supposed to guess). Nonetheless, having a VLAN range in the API makes error handling look scarier than it really is - unwinding on errors and all of that. When in reality, no one really calls this API with more than one VLAN. It is all unnecessary complexity. And despite appearing pretentious (two-phase transactional model and all), the switchdev API is really sloppy because the VLAN addition and removal operations are not paired with one another (you can add a VLAN 100 times and delete it just once). The bridge notifies through switchdev of a VLAN addition not only when the flags of an existing VLAN change, but also when nothing changes. There are switchdev drivers out there who don't like adding a VLAN that has already been added, and those checks don't really belong at driver level. But the fact that the API contains ranges is yet another factor that prevents this from being addressed in the future. Of the existing switchdev pieces of hardware, it appears that only Mellanox Spectrum supports offloading more than one VLAN at a time, through mlxsw_sp_port_vlan_set. I have kept that code internal to the driver, because there is some more bookkeeping that makes use of it, but I deleted it from the switchdev API. But since the switchdev support for ranges has already been de facto deleted by a Mellanox employee and nobody noticed for 4 years, I'm going to assume it's not a biggie. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> # switchdev and mlxsw Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11Merge tag 'nfsd-5.11-1' of git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds
Pull nfsd fixes from Chuck Lever: - Fix major TCP performance regression - Get NFSv4.2 READ_PLUS regression tests to pass - Improve NFSv4 COMPOUND memory allocation - Fix sparse warning * tag 'nfsd-5.11-1' of git://git.linux-nfs.org/projects/cel/cel-2.6: NFSD: Restore NFSv4 decoding's SAVEMEM functionality SUNRPC: Handle TCP socket sends with kernel_sendpage() again NFSD: Fix sparse warning in nfssvc.c nfsd: Don't set eof on a truncated READ_PLUS nfsd: Fixes for nfsd4_encode_read_plus_data()
2021-01-11netfilter: nf_nat: Fix memleak in nf_nat_initDinghao Liu
When register_pernet_subsys() fails, nf_nat_bysource should be freed just like when nf_ct_extend_register() fails. Fixes: 1cd472bf036ca ("netfilter: nf_nat: add nat hook register functions to nf_nat") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-10net: sunrpc: interpret the return value of kstrtou32 correctlyj.nixdorf@avm.de
A return value of 0 means success. This is documented in lib/kstrtox.c. This was found by trying to mount an NFS share from a link-local IPv6 address with the interface specified by its index: mount("[fe80::1%1]:/srv/nfs", "/mnt", "nfs", 0, "nolock,addr=fe80::1%1") Before this commit this failed with EINVAL and also caused the following message in dmesg: [...] NFS: bad IP address specified: addr=fe80::1%1 The syscall using the same address based on the interface name instead of its index succeeds. Credits for this patch go to my colleague Christian Speich, who traced the origin of this bug to this line of code. Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de> Fixes: 00cfaa943ec3 ("replace strict_strto calls") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2021-01-10netfilter: conntrack: fix reading nf_conntrack_bucketsJesper Dangaard Brouer
The old way of changing the conntrack hashsize runtime was through changing the module param via file /sys/module/nf_conntrack/parameters/hashsize. This was extended to sysctl change in commit 3183ab8997a4 ("netfilter: conntrack: allow increasing bucket size via sysctl too"). The commit introduced second "user" variable nf_conntrack_htable_size_user which shadow actual variable nf_conntrack_htable_size. When hashsize is changed via module param this "user" variable isn't updated. This results in sysctl net/netfilter/nf_conntrack_buckets shows the wrong value when users update via the old way. This patch fix the issue by always updating "user" variable when reading the proc file. This will take care of changes to the actual variable without sysctl need to be aware. Fixes: 3183ab8997a4 ("netfilter: conntrack: allow increasing bucket size via sysctl too") Reported-by: Yoel Caspersen <yoel@kviknet.dk> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-09mptcp: add the mibs for MP_PRIOGeliang Tang
This patch added the mibs for MP_PRIO, MPTCP_MIB_MPPRIOTX for transmitting of the MP_PRIO suboption, and MPTCP_MIB_MPPRIORX for receiving of it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09mptcp: add set_flags command in PM netlinkGeliang Tang
This patch added a new command MPTCP_PM_CMD_SET_FLAGS in PM netlink: In mptcp_nl_cmd_set_flags, parse the input address, get the backup value according to whether the address's FLAG_BACKUP flag is set from the user-space. Then check whether this address had been added in the local address list. If it had been, then call mptcp_nl_addr_backup to deal with this address. In mptcp_nl_addr_backup, traverse all the existing msk sockets to find the relevant sockets, and call mptcp_pm_nl_mp_prio_send_ack to send out a MP_PRIO ACK packet. Finally in mptcp_nl_cmd_set_flags, set or clear the address's FLAG_BACKUP flag. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09mptcp: add the incoming MP_PRIO supportGeliang Tang
This patch added the incoming MP_PRIO logic: Added a flag named mp_prio in struct mptcp_options_received, to mark the MP_PRIO is received, and save the priority value to struct mptcp_options_received's backup member. Then invoke mptcp_pm_mp_prio_received with the receiving subsocket and the backup value. In mptcp_pm_mp_prio_received, get the subflow context according the input subsocket, and change the subflow's backup as the incoming priority value. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09mptcp: add the outgoing MP_PRIO supportGeliang Tang
This patch added the outgoing MP_PRIO logic: In mptcp_pm_nl_mp_prio_send_ack, find the related subflow and subsocket according to the input parameter addr. Save the input priority value to suflow's backup, then set subflow's send_mp_prio flag to true, and save the input priority value to suflow's request_bkup. Finally, send out a pure ACK on the related subsocket. In mptcp_established_options_mp_prio, check whether the subflow's send_mp_prio is set. If it is, this is the packet for sending MP_PRIO. So save subflow->request_bkup value to mptcp_out_options's backup, and change the option type to OPTION_MPTCP_PRIO. In mptcp_write_options, clear the send_mp_prio flag and send out the MP_PRIO suboption with mptcp_out_options's backup value. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09mptcp: add the address ID assignment bitmapGeliang Tang
Currently the address ID set by the netlink PM from user-space is overridden by the kernel. This patch added the address ID assignment bitmap to allow user-space to set the address ID. Use a per netns bitmask id_bitmap (256 bits) to keep track of in-use IDs. And use next_id to keep track of the highest ID currently in use. If the user-space provides an ID at endpoint creation time, try to use it. If already in use, endpoint creation fails. Otherwise pick the first ID available after the highest currently in use, with wrap-around. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09net: dsa: dsa_legacy_fdb_{add,del} can be staticVladimir Oltean
Introduced in commit 37b8da1a3c68 ("net: dsa: Move FDB add/del implementation inside DSA") in net/dsa/legacy.c, these functions were moved again to slave.c as part of commit 2a93c1a3651f ("net: dsa: Allow compiling out legacy support"), before actually deleting net/dsa/slave.c in 93e86b3bc842 ("net: dsa: Remove legacy probing support"). Along with that movement there should have been a deletion of the prototypes from dsa_priv.h, they are not useful. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210108233054.1222278-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09tipc: fix NULL deref in tipc_link_xmit()Hoang Le
The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028e270fd ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20210108071337.3598-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09net-gro: remove GRO_DROPEric Dumazet
GRO_DROP can only be returned from napi_gro_frags() if the skb has not been allocated by a prior napi_get_frags() Since drivers must use napi_get_frags() and test its result before populating the skb with metadata, we can safely remove GRO_DROP since it offers no practical use. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09net: ipv6: Validate GSO SKB before finish IPv6 processingAya Levin
There are cases where GSO segment's length exceeds the egress MTU: - Forwarding of a TCP GRO skb, when DF flag is not set. - Forwarding of an skb that arrived on a virtualisation interface (virtio-net/vhost/tap) with TSO/GSO size set by other network stack. - Local GSO skb transmitted on an NETIF_F_TSO tunnel stacked over an interface with a smaller MTU. - Arriving GRO skb (or GSO skb in a virtualised environment) that is bridged to a NETIF_F_TSO tunnel stacked over an interface with an insufficient MTU. If so: - Consume the SKB and its segments. - Issue an ICMP packet with 'Packet Too Big' message containing the MTU, allowing the source host to reduce its Path MTU appropriately. Note: These cases are handled in the same manner in IPv4 output finish. This patch aligns the behavior of IPv6 and the one of IPv4. Fixes: 9e50849054a4 ("netfilter: ipv6: move POSTROUTING invocation before fragmentation") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/1610027418-30438-1-git-send-email-ayal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09net: bridge: fix misspellings using codespell toolMenglong Dong
Some typos are found out by codespell tool: $ codespell ./net/bridge/ ./net/bridge/br_stp.c:604: permanant ==> permanent ./net/bridge/br_stp.c:605: persistance ==> persistence ./net/bridge/br.c:125: underlaying ==> underlying ./net/bridge/br_input.c:43: modue ==> mode ./net/bridge/br_mrp.c:828: Determin ==> Determine ./net/bridge/br_mrp.c:848: Determin ==> Determine ./net/bridge/br_mrp.c:897: Determin ==> Determine Fix typos found by codespell. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20210108025332.52480-1-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: make sure devices go through netdev_wait_all_refsJakub Kicinski
If register_netdevice() fails at the very last stage - the notifier call - some subsystems may have already seen it and grabbed a reference. struct net_device can't be freed right away without calling netdev_wait_all_refs(). Now that we have a clean interface in form of dev->needs_free_netdev and lenient free_netdev() we can undo what commit 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.") has done and complete the unregistration path by bringing the net_set_todo() call back. After registration fails user is still expected to explicitly free the net_device, so make sure ->needs_free_netdev is cleared, otherwise rolling back the registration will cause the old double free for callers who release rtnl_lock before the free. This also solves the problem of priv_destructor not being called on notifier error. net_set_todo() will be moved back into unregister_netdevice_queue() in a follow up. Reported-by: Hulk Robot <hulkci@huawei.com> Reported-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: make free_netdev() more lenient with unregistering devicesJakub Kicinski
There are two flavors of handling netdev registration: - ones called without holding rtnl_lock: register_netdev() and unregister_netdev(); and - those called with rtnl_lock held: register_netdevice() and unregister_netdevice(). While the semantics of the former are pretty clear, the same can't be said about the latter. The netdev_todo mechanism is utilized to perform some of the device unregistering tasks and it hooks into rtnl_unlock() so the locked variants can't actually finish the work. In general free_netdev() does not mix well with locked calls. Most drivers operating under rtnl_lock set dev->needs_free_netdev to true and expect core to make the free_netdev() call some time later. The part where this becomes most problematic is error paths. There is no way to unwind the state cleanly after a call to register_netdevice(), since unreg can't be performed fully without dropping locks. Make free_netdev() more lenient, and defer the freeing if device is being unregistered. This allows error paths to simply call free_netdev() both after register_netdevice() failed, and after a call to unregister_netdevice() but before dropping rtnl_lock. Simplify the error paths which are currently doing gymnastics around free_netdev() handling. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08docs: net: explain struct net_device lifetimeJakub Kicinski
Explain the two basic flows of struct net_device's operation. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: ip_tunnel: clean up endianness conversionsJulian Wiedmann
sparse complains about some harmless endianness issues: > net/ipv4/ip_tunnel_core.c:225:43: warning: cast to restricted __be16 > net/ipv4/ip_tunnel_core.c:225:43: warning: incorrect type in initializer (different base types) > net/ipv4/ip_tunnel_core.c:225:43: expected restricted __be16 [usertype] mtu > net/ipv4/ip_tunnel_core.c:225:43: got unsigned short [usertype] iptunnel_pmtud_build_icmp() uses the wrong flavour of byte-order conversion when storing the MTU into the ICMPv4 packet. Use htons(), just like iptunnel_pmtud_build_icmpv6() does. > net/ipv4/ip_tunnel_core.c:248:35: warning: cast from restricted __be16 > net/ipv4/ip_tunnel_core.c:248:35: warning: incorrect type in argument 3 (different base types) > net/ipv4/ip_tunnel_core.c:248:35: expected unsigned short type > net/ipv4/ip_tunnel_core.c:248:35: got restricted __be16 [usertype] > net/ipv4/ip_tunnel_core.c:341:35: warning: cast from restricted __be16 > net/ipv4/ip_tunnel_core.c:341:35: warning: incorrect type in argument 3 (different base types) > net/ipv4/ip_tunnel_core.c:341:35: expected unsigned short type > net/ipv4/ip_tunnel_core.c:341:35: got restricted __be16 [usertype] eth_header() wants the Ethertype in host-order, use the correct flavour of byte-order conversion. > net/ipv4/ip_tunnel_core.c:600:45: warning: restricted __be16 degrades to integer > net/ipv4/ip_tunnel_core.c:609:30: warning: incorrect type in assignment (different base types) > net/ipv4/ip_tunnel_core.c:609:30: expected int type > net/ipv4/ip_tunnel_core.c:609:30: got restricted __be16 [usertype] > net/ipv4/ip_tunnel_core.c:619:30: warning: incorrect type in assignment (different base types) > net/ipv4/ip_tunnel_core.c:619:30: expected int type > net/ipv4/ip_tunnel_core.c:619:30: got restricted __be16 [usertype] > net/ipv4/ip_tunnel_core.c:629:30: warning: incorrect type in assignment (different base types) > net/ipv4/ip_tunnel_core.c:629:30: expected int type > net/ipv4/ip_tunnel_core.c:629:30: got restricted __be16 [usertype] The TUNNEL_* types are big-endian, so adjust the type of the local variable in ip_tun_parse_opts(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Link: https://lore.kernel.org/r/20210107144008.25777-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08udp: Prevent reuseport_select_sock from reading uninitialized socksBaptiste Lepers
reuse->socks[] is modified concurrently by reuseport_add_sock. To prevent reading values that have not been fully initialized, only read the array up until the last known safe index instead of incorrectly re-reading the last index of the array. Fixes: acdcecc61285f ("udp: correct reuseport selection with connected sockets") Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20210107051110.12247-1-baptiste.lepers@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net: fix use-after-free when UDP GRO with shared fraglistDongseok Yi
skbs in fraglist could be shared by a BPF filter loaded at TC. If TC writes, it will call skb_ensure_writable -> pskb_expand_head to create a private linear section for the head_skb. And then call skb_clone_fraglist -> skb_get on each skb in the fraglist. skb_segment_list overwrites part of the skb linear section of each fragment itself. Even after skb_clone, the frag_skbs share their linear section with their clone in PF_PACKET. Both sk_receive_queue of PF_PACKET and PF_INET (or PF_INET6) can have a link for the same frag_skbs chain. If a new skb (not frags) is queued to one of the sk_receive_queue, multiple ptypes can see and release this. It causes use-after-free. [ 4443.426215] ------------[ cut here ]------------ [ 4443.426222] refcount_t: underflow; use-after-free. [ 4443.426291] WARNING: CPU: 7 PID: 28161 at lib/refcount.c:190 refcount_dec_and_test_checked+0xa4/0xc8 [ 4443.426726] pstate: 60400005 (nZCv daif +PAN -UAO) [ 4443.426732] pc : refcount_dec_and_test_checked+0xa4/0xc8 [ 4443.426737] lr : refcount_dec_and_test_checked+0xa0/0xc8 [ 4443.426808] Call trace: [ 4443.426813] refcount_dec_and_test_checked+0xa4/0xc8 [ 4443.426823] skb_release_data+0x144/0x264 [ 4443.426828] kfree_skb+0x58/0xc4 [ 4443.426832] skb_queue_purge+0x64/0x9c [ 4443.426844] packet_set_ring+0x5f0/0x820 [ 4443.426849] packet_setsockopt+0x5a4/0xcd0 [ 4443.426853] __sys_setsockopt+0x188/0x278 [ 4443.426858] __arm64_sys_setsockopt+0x28/0x38 [ 4443.426869] el0_svc_common+0xf0/0x1d0 [ 4443.426873] el0_svc_handler+0x74/0x98 [ 4443.426880] el0_svc+0x8/0xc Fixes: 3a1296a38d0c (net: Support GRO/GSO fraglist chaining.) Signed-off-by: Dongseok Yi <dseok.yi@samsung.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/1610072918-174177-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08net, xdp: Introduce xdp_prepare_buff utility routineLorenzo Bianconi
Introduce xdp_prepare_buff utility routine to initialize per-descriptor xdp_buff fields (e.g. xdp_buff pointers). Rely on xdp_prepare_buff() in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/45f46f12295972a97da8ca01990b3e71501e9d89.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08net, xdp: Introduce xdp_init_buff utility routineLorenzo Bianconi
Introduce xdp_init_buff utility routine to initialize xdp_buff fields const over NAPI iterations (e.g. frame_sz or rxq pointer). Rely on xdp_init_buff in all XDP capable drivers. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Shay Agroskin <shayagr@amazon.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Acked-by: Camelia Groza <camelia.groza@nxp.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/bpf/7f8329b6da1434dc2b05a77f2e800b29628a8913.1608670965.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08bpf: Replace fput with sockfd_put in sock mapZheng Yongjun
The function sockfd_lookup uses fget on the value that is stored in the file field of the returned structure, so fput should ultimately be applied to this value. This can be done directly, but it seems better to use the specific macro sockfd_put, which does the same thing. The cleanup was done using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression s; @@ s = sockfd_lookup(...) ... + sockfd_put(s); ?- fput(s->file); // </smpl> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201229134834.22962-1-zhengyongjun3@huawei.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in CAN on file rename. Conflicts: drivers/net/can/m_can/tcan4x5x-core.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-08cfg80211: Save the regulatory domain with a lockIlan Peer
Saving the regulatory domain while setting custom regulatory domain was done while accessing a RCU protected pointer but without any protection. Fix this by using RTNL while accessing the pointer. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reported-by: syzbot+27771d4abcd9b7a1f5d3@syzkaller.appspotmail.com Reported-by: syzbot+db4035751c56c0079282@syzkaller.appspotmail.com Reported-by: Hans de Goede <hdegoede@redhat.com> Fixes: beee24695157 ("cfg80211: Save the regulatory domain when setting custom regulatory") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210105165657.613e9a876829.Ia38d27dbebea28bf9c56d70691d243186ede70e7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-09-13 13:35:09 +0000