summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2018-11-16etf: Cancel timer if there are no pending skbsJesus Sanchez-Palencia
There is no point in firing the qdisc watchdog if there are no future skbs pending in the queue and the watchdog had been set previously. Signed-off-by: Jesus Sanchez-Palencia <jesus.s.palencia@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16tcp: clean up STATE_TRACEYafang Shao
Currently we can use bpf or tcp tracepoint to conveniently trace the tcp state transition at the run time. So we don't need to do this stuff at the compile time anymore. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16Merge tag 'batadv-net-for-davem-20181114' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Explicitly pad short ELP packets with zeros, by Sven Eckelmann - Fix packet size calculation when merging fragments, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net/sched: act_pedit: fix memory leak when IDR allocation failsDavide Caratti
tcf_idr_check_alloc() can return a negative value, on allocation failures (-ENOMEM) or IDR exhaustion (-ENOSPC): don't leak keys_ex in these cases. Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net: 8021q: move vlan offload registrations into vlan_coreJiri Pirko
Currently, the vlan packet offloads are registered only upon 8021q module load. However, even without this module loaded, the offloads could be utilized, for example by openvswitch datapath. As reported by Michael, that causes 2x to 5x performance improvement, depending on a testcase. So move the vlan offload registrations into vlan_core and make this available even without 8021q module loaded. Reported-by: Michael Shteinbok <michaelsh86@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Michael Shteinbok <michaelsh86@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16ipv6: fix a dst leak when removing its exceptionXin Long
These is no need to hold dst before calling rt6_remove_exception_rt(). The call to dst_hold_safe() in ip6_link_failure() was for ip6_del_rt(), which has been removed in Commit 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"). Otherwise, it will cause a dst leak. This patch is to simply remove the dst_hold_safe() call before calling rt6_remove_exception_rt() and also do the same in ip6_del_cached_rt(). It's safe, because the removal of the exception that holds its dst's refcnt is protected by rt6_exception_lock. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Fixes: 23fb93a4d3f1 ("net/ipv6: Cleanup exception and cache route handling") Reported-by: Li Shuang <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net/decnet: add missing indentationColin Ian King
There is a missing indentation before the declaration of port. Add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net: remove unused skb_send_sock()Cong Wang
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net: remove VLAN_TAG_PRESENTMichał Mirosław
Replace VLAN_TAG_PRESENT with single bit flag and free up VLAN.CFI overload. Now VLAN.CFI is visible in networking stack and can be passed around intact. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net/bpf: split VLAN_PRESENT bit handling from VLAN_TCIMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16bpf: Support socket lookup in CGROUP_SOCK_ADDR progsAndrey Ignatov
Make bpf_sk_lookup_tcp, bpf_sk_lookup_udp and bpf_sk_release helpers available in programs of type BPF_PROG_TYPE_CGROUP_SOCK_ADDR. Such programs operate on sockets and have access to socket and struct sockaddr passed by user to system calls such as sys_bind, sys_connect, sys_sendmsg. It's useful to be able to lookup other sockets from these programs. E.g. sys_connect may lookup IP:port endpoint and if there is a server socket bound to that endpoint ("server" can be defined by saddr & sport being zero), redirect client connection to it by rewriting IP:port in sockaddr passed to sys_connect. Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-16bpf: Fix IPv6 dport byte order in bpf_sk_lookup_udpAndrey Ignatov
Lookup functions in sk_lookup have different expectations about byte order of provided arguments. Specifically __inet_lookup, __udp4_lib_lookup and __udp6_lib_lookup expect dport to be in network byte order and do ntohs(dport) internally. At the same time __inet6_lookup expects dport to be in host byte order and correspondingly name the argument hnum. sk_lookup works correctly with __inet_lookup, __udp4_lib_lookup and __inet6_lookup with regard to dport. But in __udp6_lib_lookup case it uses host instead of expected network byte order. It makes result returned by bpf_sk_lookup_udp for IPv6 incorrect. The patch fixes byte order of dport passed to __udp6_lib_lookup. Originally sk_lookup properly handled UDPv6, but not TCPv6. 5ef0ae84f02a fixes TCPv6 but breaks UDPv6. Fixes: 5ef0ae84f02a ("bpf: Fix IPv6 dport byte-order in bpf_sk_lookup") Signed-off-by: Andrey Ignatov <rdna@fb.com> Acked-by: Joe Stringer <joe@wand.net.nz> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-15Merge tag 'batadv-next-for-davem-20181114' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - Bump version strings, by Simon Wunderlich - Fixup includes, by Sven Eckelmann (3 patches) - Separate BATMAN_ADV_DEBUG from DEBUGFS, by Sven Eckelmann - Fixup tracing log documentation, by Sven Eckelmann - Use exclusive locks to secure netlink information dump transfers, by Sven Eckelmann (8 patches) - Move CRC16 dependency, by Sven Eckelmann - Enable MCAST by default, by Linus Luessing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: slightly optimize eth_type_transLi RongQing
netperf udp stream shows that eth_type_trans takes certain cpu, so adjust the mac address check order, and firstly check if it is device address, and only check if it is multicast address only if not the device address. After this change: To unicast, and skb dst mac is device mac, this is most of time reduce a comparision To unicast, and skb dst mac is not device mac, nothing change To multicast, increase a comparision Before: 1.03% [kernel] [k] eth_type_trans After: 0.78% [kernel] [k] eth_type_trans Signed-off-by: Zhang Yu <zhangyu31@baidu.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: remove BUG_ON from __pskb_pull_tailLi RongQing
if list is NULL pointer, and the following access of list will trigger panic, which is same as BUG_ON Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flowsEric Dumazet
When EDT conversion happened, fq lost the ability to enfore a maxrate for all flows. It kept it for non EDT flows. This commit restores the functionality. Tested: tc qd replace dev eth0 root fq maxrate 500Mbit netperf -P0 -H host -- -O THROUGHPUT 489.75 Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: sched: cls_flower: Classify packets using port rangesAmritha Nambiar
Added support in tc flower for filtering based on port ranges. Example: 1. Match on a port range: ------------------------- $ tc filter add dev enp4s0 protocol ip parent ffff:\ prio 1 flower ip_proto tcp dst_port range 20-30 skip_hw\ action drop $ tc -s filter show dev enp4s0 parent ffff: filter protocol ip pref 1 flower chain 0 filter protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp dst_port range 20-30 skip_hw not_in_hw action order 1: gact action drop random type none pass val 0 index 1 ref 1 bind 1 installed 85 sec used 3 sec Action statistics: Sent 460 bytes 10 pkt (dropped 10, overlimits 0 requeues 0) backlog 0b 0p requeues 0 2. Match on IP address and port range: -------------------------------------- $ tc filter add dev enp4s0 protocol ip parent ffff:\ prio 1 flower dst_ip 192.168.1.1 ip_proto tcp dst_port range 100-200\ skip_hw action drop $ tc -s filter show dev enp4s0 parent ffff: filter protocol ip pref 1 flower chain 0 handle 0x2 eth_type ipv4 ip_proto tcp dst_ip 192.168.1.1 dst_port range 100-200 skip_hw not_in_hw action order 1: gact action drop random type none pass val 0 index 2 ref 1 bind 1 installed 58 sec used 2 sec Action statistics: Sent 920 bytes 20 pkt (dropped 20, overlimits 0 requeues 0) backlog 0b 0p requeues 0 v4: 1. Added condition before setting port key. 2. Organized setting and dumping port range keys into functions and added validation of input range. v3: 1. Moved new fields in UAPI enum to the end of enum. 2. Removed couple of empty lines. v2: Addressed Jiri's comments: 1. Added separate functions for dst and src comparisons. 2. Removed endpoint enum. 3. Added new bit TCA_FLOWER_FLAGS_RANGE to decide normal/range lookup. 4. Cleaned up fl_lookup function. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: dump more useful information in netdev_rx_csum_fault()Cong Wang
Currently netdev_rx_csum_fault() only shows a device name, we need more information about the skb for debugging csum failures. Sample output: ens3: hw csum failure dev features: 0x0000000000014b89 skb len=84 data_len=0 pkt_type=0 gso_size=0 gso_type=0 nr_frags=0 ip_summed=0 csum=0 csum_complete_sw=0 csum_valid=0 csum_level=0 Note, I use pr_err() just to be consistent with the existing one. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15rxrpc: Fix life checkDavid Howells
The life-checking function, which is used by kAFS to make sure that a call is still live in the event of a pending signal, only samples the received packet serial number counter; it doesn't actually provoke a change in the counter, rather relying on the server to happen to give us a packet in the time window. Fix this by adding a function to force a ping to be transmitted. kAFS then keeps track of whether there's been a stall, and if so, uses the new function to ping the server, resetting the timeout to allow the reply to come back. If there's a stall, a ping and the call is *still* stalled in the same place after another period, then the call will be aborted. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15xfrm: policy: fix netlink/pf_key policy lookupsFlorian Westphal
Colin Ian King says: Static analysis with CoverityScan found a potential issue [..] It seems that pointer pol is set to NULL and then a check to see if it is non-null is used to set pol to tmp; howeverm this check is always going to be false because pol is always NULL. Fix this and update test script to catch this. Updated script only: ./xfrm_policy.sh ; echo $? RTNETLINK answers: No such file or directory FAIL: ip -net ns3 xfrm policy get src 10.0.1.0/24 dst 10.0.2.0/24 dir out RTNETLINK answers: No such file or directory [..] PASS: policy before exception matches PASS: ping to .254 bypassed ipsec tunnel PASS: direct policy matches PASS: policy matches 1 Fixes: 6be3b0db6db ("xfrm: policy: add inexact policy search tree infrastructure") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-11-15xfrm: policy: add missing indentationColin Ian King
There is a missing indentation before the goto statement. Add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-11-15af_key: fix indentation on declaration statementColin Ian King
There is an indentation issue before the declaration of xfrm_ctx. Remove spaces and replace with a tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-11-15Merge tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Don't exit the NFSv4 state manager without clearing NFS4CLNT_MANAGER_RUNNING Bugfixes: - Fix an Oops when destroying the RPCSEC_GSS credential cache - Fix an Oops during delegation callbacks - Ensure that the NFSv4 state manager exits the loop on SIGKILL - Fix a bogus get/put in generic_key_to_expire()" * tag 'nfs-for-4.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix an Oops during delegation callbacks SUNRPC: Fix a bogus get/put in generic_key_to_expire() SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cache NFSv4: Ensure that the state manager exits the loop on SIGKILL NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNING
2018-11-14l2tp: fix a sock refcnt leak in l2tp_tunnel_registerXin Long
This issue happens when trying to add an existent tunnel. It doesn't call sock_put() before returning -EEXIST to release the sock refcnt that was held by calling sock_hold() before the existence check. This patch is to fix it by holding the sock after doing the existence check. Fixes: f6cd651b056f ("l2tp: fix race in duplicate tunnel detection") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14Merge tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Three nfsd bugfixes. None are new bugs, but they all take a little effort to hit, which might explain why they weren't found sooner" * tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux: SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer() nfsd: COPY and CLONE operations require the saved filehandle to be set sunrpc: correct the computation for page_ptr when truncating
2018-11-14net: sched: red: notify drivers about RED's limit parameterJakub Kicinski
RED qdisc's limit parameter changes the behaviour of the qdisc, for instance if it's set to 0 qdisc will drop all the packets. When replace operation happens and parameter is set to non-0 a new fifo qdisc will be instantiated and replace the old child qdisc which will be destroyed. Drivers need to know the parameter, even if they don't impose the actual limit to be able to reliably reconstruct the Qdisc hierarchy. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14net: sched: mq: offload a graft notificationJakub Kicinski
Drivers offloading Qdiscs should have reasonable certainty the offloaded behaviour matches the SW path. This is impossible if the driver does not know about all Qdiscs or when Qdiscs move and are reused. Send a graft notification from MQ. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14net: sched: red: offload a graft notificationJakub Kicinski
Drivers offloading Qdiscs should have reasonable certainty the offloaded behaviour matches the SW path. This is impossible if the driver does not know about all Qdiscs or when Qdiscs move and are reused. Send a graft notification from RED. The drivers are expected to simply stop offloading the Qdisc, if a non-standard child is ever grafted onto it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14net: sched: provide notification for graft on rootJakub Kicinski
Drivers are currently not notified when a Qdisc is grafted as root. This requires special casing Qdiscs added with parent = TC_H_ROOT in the driver. Also there is no notification sent to the driver when an existing Qdisc is grafted as root. Add this very simple notifications, drivers should now be able to track their Qdisc tree fully. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13Merge tag 'linux-can-fixes-for-4.20-20181109' of ↵David S. Miller
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-11-09 this is a pull request of 20 patches for net/master. First we have a patch by Oliver Hartkopp which changes the raw socket's raw_sendmsg() to return an error value if the user tries to send a CANFD frame to a CAN-2.0 device. The next two patches are by Jimmy Assarsson and fix potential problems in the kvaser_usb driver. YueHaibing's patches for the ucan driver fix a compile time warning and remove a duplicate include. Eugeniu Rosca patch adds more binding documentation to the rcar_can driver bindings. The next two patches are by Fabrizio Castro for the rcar_can driver and fixes a problem in the driver's probe function and document the r8a774a1 binding. Lukas Wunner's patch fixes a recpetion problem in hi311x driver by switching from edge to level triggered interruts. The next three patches all target the flexcan driver. Pankaj Bansal's patch unconditionally unlocks the last mailbox used for RX. Alexander Stein provides a better workaround for a hardware limitation when sending RTR frames, by using the last mailbox for TX, resulting in fewer lost frames. The patch by me simplyfies the driver, by making a runtime value a compile time constant. The following 4 patches are by me and provide the groundwork for the next patches by Oleksij Rempel. To avoid code duplication common code in the common CAN driver infrastructure is factured out and error handling is cleaned up. The next 4 patches are by Oleksij Rempel and fix the problem in the flexcan driver that other processes see TX frames arrive out of order with ragards to a RX'ed frame (which are send by a different system on the CAN bus as the result of our TX frame). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-13netfilter: nf_tables: fix use-after-free when deleting compat expressionsFlorian Westphal
nft_compat ops do not have static storage duration, unlike all other expressions. When nf_tables_expr_destroy() returns, expr->ops might have been free'd already, so we need to store next address before calling expression destructor. For same reason, we can't deref match pointer after nft_xt_put(). This can be easily reproduced by adding msleep() before nft_match_destroy() returns. Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-13netfilter: xt_RATEEST: remove netns exit routineTaehee Yoo
xt_rateest_net_exit() was added to check whether rules are flushed successfully. but ->net_exit() callback is called earlier than ->destroy() callback. So that ->net_exit() callback can't check that. test commands: %ip netns add vm1 %ip netns exec vm1 iptables -t mangle -I PREROUTING -p udp \ --dport 1111 -j RATEEST --rateest-name ap \ --rateest-interval 250ms --rateest-ewma 0.5s %ip netns del vm1 splat looks like: [ 668.813518] WARNING: CPU: 0 PID: 87 at net/netfilter/xt_RATEEST.c:210 xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Modules linked in: xt_RATEEST xt_tcpudp iptable_mangle bpfilter ip_tables x_tables [ 668.813518] CPU: 0 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc7+ #21 [ 668.813518] Workqueue: netns cleanup_net [ 668.813518] RIP: 0010:xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Code: 00 48 8b 85 30 ff ff ff 4c 8b 23 80 38 00 0f 85 24 01 00 00 48 8b 85 30 ff ff ff 4d 85 e4 4c 89 a5 58 ff ff ff c6 00 f8 74 b2 <0f> 0b 48 83 c3 08 4c 39 f3 75 b0 48 b8 00 00 00 00 00 fc ff df 49 [ 668.813518] RSP: 0018:ffff8801156c73f8 EFLAGS: 00010282 [ 668.813518] RAX: ffffed0022ad8e85 RBX: ffff880118928e98 RCX: 5db8012a00000000 [ 668.813518] RDX: ffff8801156c7428 RSI: 00000000cb1d185f RDI: ffff880115663b74 [ 668.813518] RBP: ffff8801156c74d0 R08: ffff8801156633c0 R09: 1ffff100236440be [ 668.813518] R10: 0000000000000001 R11: ffffed002367d852 R12: ffff880115142b08 [ 668.813518] R13: 1ffff10022ad8e81 R14: ffff880118928ea8 R15: dffffc0000000000 [ 668.813518] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 [ 668.813518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 668.813518] CR2: 0000563aa69f4f28 CR3: 0000000105a16000 CR4: 00000000001006f0 [ 668.813518] Call Trace: [ 668.813518] ? unregister_netdevice_many+0xe0/0xe0 [ 668.813518] ? xt_rateest_net_init+0x2c0/0x2c0 [xt_RATEEST] [ 668.813518] ? default_device_exit+0x1ca/0x270 [ 668.813518] ? remove_proc_entry+0x1cd/0x390 [ 668.813518] ? dev_change_net_namespace+0xd00/0xd00 [ 668.813518] ? __init_waitqueue_head+0x130/0x130 [ 668.813518] ops_exit_list.isra.10+0x94/0x140 [ 668.813518] cleanup_net+0x45b/0x900 [ 668.813518] ? net_drop_ns+0x110/0x110 [ 668.813518] ? swapgs_restore_regs_and_return_to_usermode+0x3c/0x80 [ 668.813518] ? save_trace+0x300/0x300 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? process_one_work+0xb60/0x1de0 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? __lock_acquire+0x4500/0x4500 [ 668.813518] ? __lock_is_held+0xb4/0x140 [ 668.813518] process_one_work+0xc13/0x1de0 [ 668.813518] ? pwq_dec_nr_in_flight+0x3c0/0x3c0 [ 668.813518] ? set_load_weight+0x270/0x270 [ ... ] Fixes: 3427b2ab63fa ("netfilter: make xt_rateest hash table per net") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12SUNRPC: Fix a bogus get/put in generic_key_to_expire()Trond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-12SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cacheTrond Myklebust
Commit 07d02a67b7fa causes a use-after free in the RPCSEC_GSS credential destroy code, because the call to get_rpccred() in gss_destroying_context() will now always fail to increment the refcount. While we could just replace the get_rpccred() with a refcount_set(), that would have the unfortunate consequence of resurrecting a credential in the credential cache for which we are in the process of destroying the RPCSEC_GSS context. Rather than do this, we choose to make a copy that is never added to the cache and use that to destroy the context. Fixes: 07d02a67b7fa ("SUNRPC: Simplify lookup code") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-12sctp: process sk_reuseport in sctp_get_port_localXin Long
When socks' sk_reuseport is set, the same port and address are allowed to be bound into these socks who have the same uid. Note that the difference from sk_reuse is that it allows multiple socks to listen on the same port and address. Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12sctp: add sock_reuseport for the sock in __sctp_hash_endpointXin Long
This is a part of sk_reuseport support for sctp. It defines a helper sctp_bind_addrs_check() to check if the bind_addrs in two socks are matched. It will add sock_reuseport if they are completely matched, and return err if they are partly matched, and alloc sock_reuseport if all socks are not matched at all. It will work until sk_reuseport support is added in sctp_get_port_local() in the next patch. v1->v2: - use 'laddr->valid && laddr2->valid' check instead as Marcelo pointed in sctp_bind_addrs_check(). Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12sctp: do reuseport_select_sock in __sctp_rcv_lookup_endpointXin Long
This is a part of sk_reuseport support for sctp, and it selects a sock by the hashkey of lport, paddr and dport by default. It will work until sk_reuseport support is added in sctp_get_port_local() in the next patch. v1->v2: - define lport as __be16 instead of __be32 as Marcelo pointed in __sctp_rcv_lookup_endpoint(). Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-12netfilter: nf_flow_table: simplify nf_flow_offload_gc_step()Taehee Yoo
nf_flow_offload_gc_step() and nf_flow_table_iterate() are very similar. so that many duplicate code can be removed. After this patch, nf_flow_offload_gc_step() is simple callback function of nf_flow_table_iterate() like nf_flow_table_do_cleanup(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_flow_table: make nf_flow_table_iterate() staticTaehee Yoo
nf_flow_table_iterate() is local function, make it static. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_tables: don't use position attribute on rule replacementFlorian Westphal
Its possible to set both HANDLE and POSITION when replacing a rule. In this case, the rule at POSITION gets replaced using the userspace-provided handle. Rule handles are supposed to be generated by the kernel only. Duplicate handles should be harmless, however better disable this "feature" by only checking for the POSITION attribute on insert operations. Fixes: 5e94846686d0 ("netfilter: nf_tables: add insert operation") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_tables: don't skip inactive chains during updateFlorian Westphal
There is no synchronization between packet path and the configuration plane. The packet path uses two arrays with rules, one contains the current (active) generation. The other either contains the last (obsolete) generation or the future one. Consider: cpu1 cpu2 nft_do_chain(c); delete c net->gen++; genbit = !!net->gen; rules = c->rg[genbit]; cpu1 ignores c when updating if c is not active anymore in the new generation. On cpu2, we now use rules from wrong generation, as c->rg[old] contains the rules matching 'c' whereas c->rg[new] was not updated and can even point to rules that have been free'd already, causing a crash. To fix this, make sure that 'current' to the 'next' generation are identical for chains that are going away so that c->rg[new] will just use the matching rules even if genbit was incremented already. Fixes: 0cbc06b3faba7 ("netfilter: nf_tables: remove synchronize_rcu in commit phase") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_conncount: fix unexpected permanent node of list.Taehee Yoo
When list->count is 0, the list is deleted by GC. But list->count is never reached 0 because initial count value is 1 and it is increased when node is inserted. So that initial value of list->count should be 0. Originally GC always finds zero count list through deleting node and decreasing count. However, list may be left empty since node insertion may fail eg. allocaton problem. In order to solve this problem, GC routine also finds zero count list without deleting node. Fixes: cb2b36f5a97d ("netfilter: nf_conncount: Switch to plain list") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_conncount: fix list_del corruption in conn_freeTaehee Yoo
nf_conncount_tuple is an element of nft_connlimit and that is deleted by conn_free(). Elements can be deleted by both GC routine and data path functions (nf_conncount_lookup, nf_conncount_add) and they call conn_free() to free elements. But conn_free() only protects lists, not each element. So that list_del corruption could occurred. The conn_free() doesn't check whether element is already deleted. In order to protect elements, dead flag is added. If an element is deleted, dead flag is set. The only conn_free() can delete elements so that both list lock and dead flag are enough to protect it. test commands: %nft add table ip filter %nft add chain ip filter input { type filter hook input priority 0\; } %nft add rule filter input meter test { ip id ct count over 2 } counter splat looks like: [ 1779.495778] list_del corruption, ffff8800b6e12008->prev is LIST_POISON2 (dead000000000200) [ 1779.505453] ------------[ cut here ]------------ [ 1779.506260] kernel BUG at lib/list_debug.c:50! [ 1779.515831] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1779.516772] CPU: 0 PID: 33 Comm: kworker/0:2 Not tainted 4.19.0-rc6+ #22 [ 1779.516772] Workqueue: events_power_efficient nft_rhash_gc [nf_tables_set] [ 1779.516772] RIP: 0010:__list_del_entry_valid+0xd8/0x150 [ 1779.516772] Code: 39 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 ea 48 c7 c7 00 c3 5b 98 e8 0f dc 40 ff 0f 0b 48 c7 c7 60 c3 5b 98 e8 01 dc 40 ff <0f> 0b 48 c7 c7 c0 c3 5b 98 e8 f3 db 40 ff 0f 0b 48 c7 c7 20 c4 5b [ 1779.516772] RSP: 0018:ffff880119127420 EFLAGS: 00010286 [ 1779.516772] RAX: 000000000000004e RBX: dead000000000200 RCX: 0000000000000000 [ 1779.516772] RDX: 000000000000004e RSI: 0000000000000008 RDI: ffffed0023224e7a [ 1779.516772] RBP: ffff88011934bc10 R08: ffffed002367cea9 R09: ffffed002367cea9 [ 1779.516772] R10: 0000000000000001 R11: ffffed002367cea8 R12: ffff8800b6e12008 [ 1779.516772] R13: ffff8800b6e12010 R14: ffff88011934bc20 R15: ffff8800b6e12008 [ 1779.516772] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 [ 1779.516772] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1779.516772] CR2: 00007fc876534010 CR3: 000000010da16000 CR4: 00000000001006f0 [ 1779.516772] Call Trace: [ 1779.516772] conn_free+0x9f/0x2b0 [nf_conncount] [ 1779.516772] ? nf_ct_tmpl_alloc+0x2a0/0x2a0 [nf_conntrack] [ 1779.516772] ? nf_conncount_add+0x520/0x520 [nf_conncount] [ 1779.516772] ? do_raw_spin_trylock+0x1a0/0x1a0 [ 1779.516772] ? do_raw_spin_trylock+0x10/0x1a0 [ 1779.516772] find_or_evict+0xe5/0x150 [nf_conncount] [ 1779.516772] nf_conncount_gc_list+0x162/0x360 [nf_conncount] [ 1779.516772] ? nf_conncount_lookup+0xee0/0xee0 [nf_conncount] [ 1779.516772] ? _raw_spin_unlock_irqrestore+0x45/0x50 [ 1779.516772] ? trace_hardirqs_off+0x6b/0x220 [ 1779.516772] ? trace_hardirqs_on_caller+0x220/0x220 [ 1779.516772] nft_rhash_gc+0x16b/0x540 [nf_tables_set] [ ... ] Fixes: 5c789e131cbb ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12netfilter: nf_conncount: use spin_lock_bh instead of spin_lockTaehee Yoo
conn_free() holds lock with spin_lock() and it is called by both nf_conncount_lookup() and nf_conncount_gc_list(). nf_conncount_lookup() is called from bottom-half context and nf_conncount_gc_list() from process context. So that spin_lock() call is not safe. Hence conn_free() should use spin_lock_bh() instead of spin_lock(). test commands: %nft add table ip filter %nft add chain ip filter input { type filter hook input priority 0\; } %nft add rule filter input meter test { ip saddr ct count over 2 } \ counter splat looks like: [ 461.996507] ================================ [ 461.998999] WARNING: inconsistent lock state [ 461.998999] 4.19.0-rc6+ #22 Not tainted [ 461.998999] -------------------------------- [ 461.998999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 461.998999] kworker/0:2/134 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 461.998999] 00000000a71a559a (&(&list->list_lock)->rlock){+.?.}, at: conn_free+0x69/0x2b0 [nf_conncount] [ 461.998999] {IN-SOFTIRQ-W} state was registered at: [ 461.998999] _raw_spin_lock+0x30/0x70 [ 461.998999] nf_conncount_add+0x28a/0x520 [nf_conncount] [ 461.998999] nft_connlimit_eval+0x401/0x580 [nft_connlimit] [ 461.998999] nft_dynset_eval+0x32b/0x590 [nf_tables] [ 461.998999] nft_do_chain+0x497/0x1430 [nf_tables] [ 461.998999] nft_do_chain_ipv4+0x255/0x330 [nf_tables] [ 461.998999] nf_hook_slow+0xb1/0x160 [ ... ] [ 461.998999] other info that might help us debug this: [ 461.998999] Possible unsafe locking scenario: [ 461.998999] [ 461.998999] CPU0 [ 461.998999] ---- [ 461.998999] lock(&(&list->list_lock)->rlock); [ 461.998999] <Interrupt> [ 461.998999] lock(&(&list->list_lock)->rlock); [ 461.998999] [ 461.998999] *** DEADLOCK *** [ 461.998999] [ ... ] Fixes: 5c789e131cbb ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-11-12batman-adv: enable MCAST by default at compile timeLinus Lüssing
Thanks to rigorous testing in wireless community mesh networks several issues with multicast entries in the translation table were found and fixed in the last 1.5 years. Now we see the first larger networks (a few hundred nodes) with a batman-adv version with multicast optimizations enabled arising, with no TT / multicast optimization related issues so far. Therefore it seems safe to enable multicast optimizations by default. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Move CRC16 dependency to BATMAN_ADV_BLASven Eckelmann
The commit ced72933a5e8 ("batman-adv: use CRC32C instead of CRC16 in TT code") switched the translation table code from crc16 to crc32c. The (optional) bridge loop avoidance code is the only user of this function. batman-adv should only select CRC16 when it is actually using it. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent multicast netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent local TT netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent dat netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent claim netlink dump detectionSven Eckelmann
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
generated by cgit (git 2.34.1) at 2025-09-13 03:54:16 +0000