| Age | Commit message (Collapse) | Author |
|---|
|
The 'max_avail' value is calculated from the system memory
size using order_base_2().
order_base_2(x) is defined as '(x) ? fn(x) : 0'.
The compiler generates two copies of the code that follows
and then expands clamp(max, min, PAGE_SHIFT - 12) (11 on 32bit).
This triggers a compile-time assert since min is 5.
In reality a system would have to have less than 512MB memory
for the bounds passed to clamp to be reversed.
Swap the order of the arguments to clamp() to avoid the warning.
Replace the clamp_val() on the line below with clamp().
clamp_val() is just 'an accident waiting to happen' and not needed here.
Detected by compile time checks added to clamp(), specifically:
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYsT34UkGFKxus63H6UVpYi5GRZkezT9MRLfAbM3f6ke0g@mail.gmail.com/
Fixes: 4f325e26277b ("ipvs: dynamically limit the connection hash table")
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
All inet_getpeer() callers except ip4_frag_init() don't need
to acquire a permanent refcount on the inetpeer.
They can switch to full RCU protection.
Move the refcount_inc_not_zero() into ip4_frag_init(),
so that all the other callers no longer have to
perform a pair of expensive atomic operations on
a possibly contended cache line.
inet_putpeer() no longer needs to be exported.
After this patch, my DUT can receive 8,400,000 UDP packets
per second targeting closed ports, using 50% less cpu cycles
than before.
Also change two calls to l3mdev_master_ifindex() by
l3mdev_master_ifindex_rcu() (Ido ideas)
Fixes: 8c2bd38b95f7 ("icmp: change the order of rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_putpeer() will be removed in the following patch,
because we will no longer use refcounts.
Update inetpeer timestamp (p->dtime) at lookup time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer() want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers of inet_getpeer_v4() and inet_getpeer_v6()
want to create an inetpeer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241215175629.1248773-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241216-sysfs-const-bin_attr-net-v1-1-ec460b91f274@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xiao Liang reported that the cited commit changed netns handling
in newlink() of netkit, veth, and vxcan.
Before the patch, if we don't find a netns attribute in the peer
device attributes, we tried to find another netns attribute in
the outer netlink attributes by passing it to rtnl_link_get_net().
Let's restore the original behaviour.
Fixes: 48327566769a ("rtnetlink: fix double call of rtnl_link_get_net_ifla()")
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCORBVVU8P6AHcEkENMj+gD2d3ce9t=A_o48E0yOQp8_wUQ@mail.gmail.com/#t
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Tested-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20241216110432.51488-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
page_pool_is_last_ref() releases a reference while the name,
to me at least, suggests it just checks if the refcount is 1.
The semantics of the function are the same as those of
atomic_dec_and_test() and refcount_dec_and_test(), so just
use the _and_test() suffix.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241215212938.99210-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add devlink_fmsg_dump_skb() function that adds some diagnostic
information about skb (like length, pkt type, MAC, etc) to devlink
fmsg mechanism using bunch of devlink_fmsg_put() function calls.
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Now that we have generic QDISC_CONGESTED and QDISC_OVERLIMIT drop
reasons, let's have all the qdiscs that contain an AQM apply them
consistently when dropping packets.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241214-fq-codel-drop-reasons-v1-1-2a814e884c37@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
unix_our_peer() is used only in unix_may_send().
Let's inline it in unix_may_send().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The error path is complicated in unix_dgram_sendmsg() because there
are two timings when other could be non-NULL: when it's fetched from
unix_peer_get() and when it's looked up by unix_find_other().
Let's move unix_peer_get() to the else branch for unix_find_other()
and clean up the error paths.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When other has SOCK_DEAD in unix_dgram_sendmsg(), we hold
unix_state_lock() for the sender socket first.
However, we do not need it for sk->sk_type.
Let's move the lock down a bit.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When other has SOCK_DEAD in unix_dgram_sendmsg(), we call sock_put() for
it first and then set NULL to other before jumping to the error path.
This is to skip sock_put() in the error path.
Let's not set NULL to other and defer the sock_put() to the error path
to clean up the labels later.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are two paths jumping to the restart label in unix_dgram_sendmsg().
One requires another lookup and sk_filter(), but the other doesn't.
Let's split the label to make each flow more straightforward.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In unix_dgram_sendmsg(), we use a local variable sunaddr pointing
NULL or msg->msg_name based on msg->msg_namelen.
Let's remove sunaddr and simplify the usage.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When other is NULL in unix_dgram_sendmsg(), we check if sunaddr
is NULL before looking up a receiver socket.
There are three paths going through the check, but it's always
false for 2 out of the 3 paths: the first socket lookup and the
second 'goto restart'.
The condition can be true for the first 'goto restart' only when
SOCK_DEAD is flagged for the socket found with msg->msg_name.
Let's move the check to the single appropriate path.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_dgram_sendmsg().
Then, we need not (re)set 0 to err.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If we move send_sig() to the SEND_SHUTDOWN check before
the while loop, then we can reuse the same kfree_skb()
after the pipe_err_free label.
Let's gather the scattered kfree_skb()s in error paths.
While at it, some style issues are fixed, and the pipe_err_free
label is renamed to out_pipe to match other label names.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_stream_sendmsg().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The label order is weird in unix_stream_connect(), and all NULL checks
are unnecessary if reordered.
Let's clean up the error paths to make it easy to set a drop reason
for each path.
While at it, a comment with the old style is updated.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will introduce skb drop reason for AF_UNIX, then we need to
set an errno and a drop reason for each path.
Let's set an error only when it's needed in unix_stream_connect().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
VID 0 is not a valid VLAN according to "802.1Q-2011" "Table 9-2—Reserved
VID values". It is only used to indicate "priority tag" frames which only
contain priority information and no VID.
The 8021q is also redirecting the priority tagged frames to the underlying
interface since commit ad1afb003939 ("vlan_dev: VLAN 0 should be treated as
"no vlan tag" (802.1p packet)"). But at the same time, it automatically
adds the VID 0 to all devices to ensure that VID 0 is in the allowed list
of the HW filter. This resulted in a VLAN 0 which was always announced in
OGM messages.
batman-adv should therefore not create a new batadv_softif_vlan for VID 0
and handle all VID 0 related frames using the "untagged" global/local
translation tables.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Linux socket API currently allows setting SO_PRIORITY at the
socket level, applying a uniform priority to all packets sent through
that socket. The exception to this is IP_TOS, when the priority value
is calculated during the handling of
ancillary data, as implemented in commit f02db315b8d8 ("ipv4: IP_TOS
and IP_TTL can be specified as ancillary data").
However, this is a computed
value, and there is currently no mechanism to set a custom priority
via control messages prior to this patch.
According to this patch, if SO_PRIORITY is specified as ancillary data,
the packet is sent with the priority value set through
sockc->priority, overriding the socket-level values
set via the traditional setsockopt() method. This is analogous to
the existing support for SO_MARK, as implemented in
commit c6af0c227a22 ("ip: support SO_MARK cmsg").
If both cmsg SO_PRIORITY and IP_TOS are passed, then the one that
takes precedence is the last one in the cmsg list.
This patch has the side effect that raw_send_hdrinc now interprets cmsg
IP_TOS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-3-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify priority setting permissions with the 'sk_set_prio_allowed'
function, centralizing the validation logic. This change is made in
anticipation of a second caller in a following patch.
No functional changes.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-2-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace is adding data to an RPC call for transmission, it must pass
MSG_MORE to sendmsg() if it intends to add more data in future calls to
sendmsg(). Calling sendmsg() without MSG_MORE being asserted closes the
transmission phase of the call (assuming sendmsg() adds all the data
presented) and further attempts to add more data should be rejected.
However, this is no longer the case. The change of call state that was
previously the guard got bumped over to the I/O thread, which leaves a
window for a repeat sendmsg() to insert more data. This previously went
unnoticed, but the more recent patch that changed the structures behind the
Tx queue added a warning:
WARNING: CPU: 3 PID: 6639 at net/rxrpc/sendmsg.c:296 rxrpc_send_data+0x3f2/0x860
and rejected the additional data, returning error EPROTO.
Fix this by adding a guard flag to the call, setting the flag when we queue
the final packet and then rejecting further attempts to add data with
EPROTO.
Fixes: 2d689424b618 ("rxrpc: Move call state changes from sendmsg to I/O thread")
Reported-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6757fb68.050a0220.2477f.005f.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: syzbot+ff11be94dfcd7a5af8da@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870480.1734037462@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use spin_lock_irq(), not spin_lock_bh() to take the lock when accessing the
->attend_link() to stop a delay in the I/O thread due to an interrupt being
taken in the app thread whilst that holds the lock and vice versa.
Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/2870146.1734037095@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 45 != 44 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 45 != 44 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 103 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 103 != 100 missing queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 125, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
# Check failed 102 != 100 repeated queue keys
# Check| At /root/ksft-net-drv/drivers/net/./stats.py, line 127, in qstat_by_ifindex:
# Check| ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
# Check failed 102 != 100 missing queue keys
not ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:4 fail:1 xfail:0 xpass:0 skip:0 error:0
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:stats.py
timeout set to 45
selftests: drivers/net: stats.py
KTAP version 1
1..5
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: ab63a2387cb9 ("netdev: add per-queue statistics")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The context is supposed to record the next queue to dump,
not last dumped. If the dump doesn't fit we will restart
from the already-dumped queue, duplicating the message.
Before this fix and with the selftest improvements later
in this series we see:
# ./run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 102 != 100
# Check| At /root/ksft-net-drv/drivers/net/./queues.py, line 32, in get_queues:
# Check| ksft_eq(queues, expected)
# Check failed 101 != 100
not ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
not ok 1 selftests: drivers/net: queues.py # exit=1
With the fix:
# ./ksft-net-drv/run_kselftest.sh -t drivers/net:queues.py
timeout set to 45
selftests: drivers/net: queues.py
KTAP version 1
1..2
ok 1 queues.get_queues
ok 2 queues.addremove_queues
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241213152244.3080955-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If mounted with sparseread option, ceph_direct_read_write() ends up
making an unnecessarily allocation for O_DIRECT writes.
Fixes: 03bc06c7b0bd ("ceph: add new mount option to enable sparse reads")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
|
|
Cross-merge bpf fixes after downstream PR.
No conflicts.
Adjacent changes in:
Auto-merging include/linux/bpf.h
Auto-merging include/linux/bpf_verifier.h
Auto-merging kernel/bpf/btf.c
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/trace/bpf_trace.c
Auto-merging tools/testing/selftests/bpf/progs/test_tp_btf_nullable.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce support for ETHTOOL_MSG_TSCONFIG_GET/SET ethtool netlink socket
to read and configure hwtstamp configuration of a PHC provider. Note that
simultaneous hwtstamp isn't supported; configuring a new one disables the
previous setting.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Either the MAC or the PHY can provide hwtstamp, so we should be able to
read the tsinfo for any hwtstamp provider.
Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a
network topology.
Add support for a specific dump command to retrieve all hwtstamp
providers within the network topology, with added functionality for
filtered dump to target a single interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce the description of a hwtstamp provider, mainly defined with a
the hwtstamp source and the phydev pointer.
Add a hwtstamp provider description within the netdev structure to
allow saving the hwtstamp we want to use. This prepares for future
support of an ethtool netlink command to select the desired hwtstamp
provider. By default, the old API that does not support hwtstamp
selectability is used, meaning the hwtstamp provider pointer is unset.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the net_hwtstamp_validate function accessible in prevision to use
it from ethtool to validate the hwtstamp configuration before setting it.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the dev_get_hwtstamp_phylib function accessible in prevision to use
it from ethtool to read the hwtstamp current configuration.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This introduces 5 counters to keep track of key updates:
Tls{Rx,Tx}Rekey{Ok,Error} and TlsRxRekeyReceived.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the possibility to change the key and IV when using
TLS1.3. Changing the cipher or TLS version is not supported.
Once we have updated the RX key, we can unblock the receive side. If
the rekey fails, the context is unmodified and userspace is free to
retry the update or close the socket.
This change only affects tls_sw, since 1.3 offload isn't supported.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a TLS handshake record carrying a KeyUpdate message is received,
all subsequent records will be encrypted with a new key. We need to
stop decrypting incoming records with the old key, and wait until
userspace provides a new key.
Make a note of this in the RX context just after decrypting that
record, and stop recvmsg/splice calls with EKEYEXPIRED until the new
key is available.
key_update_pending can't be combined with the existing bitfield,
because we will read it locklessly in ->poll.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon successful return, mptcp_pm_parse_addr() returns 0. There is no need
to set "err = 0" after this. So after mptcp_nl_find_ssk() returns, just
need to set "err = -ESRCH", then release and free msk socket if it returns
NULL.
Also, no need to define the variable "subflow" in subflow_destroy(), use
mptcp_subflow_ctx(ssk) directly.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-7-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Generally, in the path manager interfaces, the local address is defined as
an mptcp_pm_addr_entry type address, while the remote address is defined as
an mptcp_addr_info type one:
(struct mptcp_pm_addr_entry *local, struct mptcp_addr_info *remote)
But subflow_destroy() interface uses two mptcp_addr_info type parameters.
This patch changes the first one to mptcp_pm_addr_entry type and use helper
mptcp_pm_parse_entry() to parse it instead of using mptcp_pm_parse_addr().
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-6-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_pm_remove_addrs() actually only deletes one address, which does
not match its name. This patch renames it to mptcp_pm_remove_addr_entry()
and changes the parameter "rm_list" to "entry".
With the help of mptcp_pm_remove_addr_entry(), it's no longer necessary to
move the entry to be deleted to free_list and then traverse the list to
delete the entry, which is not allowed in BPF. The entry can be directly
deleted through list_del_rcu() and sock_kfree_s() now.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-5-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since mptcp_pm_remove_addrs() is only called from the userspace PM, this
patch moves it into pm_userspace.c.
For this, lookup_subflow_by_saddr() and remove_anno_list_by_saddr()
helpers need to be exported in protocol.h. Also add "mptcp_" prefix for
these helpers.
Here, mptcp_pm_remove_addrs() is not changed to a static function because
it will be used in BPF Path Manager.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-4-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each userspace pm netlink function uses nla_get_u32() to get the msk
token value, then pass it to mptcp_token_get_sock() to get the msk.
Finally check whether userspace PM is selected on this msk. It makes
sense to wrap them into a helper, named mptcp_userspace_pm_get_sock(),
to do this.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-3-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to mptcp_for_each_subflow() macro, this patch adds a new macro
mptcp_for_each_userspace_pm_addr() for userspace PM to iterate over the
address entries on the local address list userspace_pm_local_addr_list
of the mptcp socket.
This patch doesn't change the behaviour of the code, just refactoring.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-2-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like __lookup_addr() helper in pm_netlink.c, a new helper
mptcp_userspace_pm_lookup_addr() is also defined in pm_userspace.c.
It looks up the corresponding mptcp_pm_addr_entry address in
userspace_pm_local_addr_list through the passed "addr" parameter
and returns the found address entry.
This helper can be used in mptcp_userspace_pm_delete_local_addr(),
mptcp_userspace_pm_set_flags(), mptcp_userspace_pm_get_local_id()
and mptcp_userspace_pm_is_backup() to simplify the code.
Please note that with this change now list_for_each_entry() is used in
mptcp_userspace_pm_append_new_local_addr(), not list_for_each_entry_safe(),
but that's OK to do so because mptcp_userspace_pm_lookup_addr() only
returns an entry from the list, the list hasn't been modified here.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241213-net-next-mptcp-pm-misc-cleanup-v1-1-ddb6d00109a8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
adding a route metric greater than 0x7fff_ffff leads to an
unintended wrap when printing the underlying u32 as an
unsigned int (`%d`) thus incorrectly rendering the metric
as negative. Formatting using `%u` corrects the issue.
Signed-off-by: Maximilian Güntner <code@mguentner.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241212161911.51598-1-code@mguentner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the
length of msg should be received from network and the value should not be
fully trusted as it is from the network. Once the value of length exceeds
the value of buflen in function smc_clc_wait_msg it may run into deadloop
when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in
case of deadloop in draining.
Fixes: fb4f79264c0f ("net/smc: tolerate future SMCD versions")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it.
Fixes: 5c21c4ccafe8 ("net/smc: determine accepted ISM devices")
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
