summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-11-25mac80211: remove useless tests for arrayJohannes Berg
Coverity points out that checking assoc_data->ie is completely useless since it's an array in the struct and can't be NULL - remove the useless checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: clean up mesh local link ID generationThomas Pedersen
802.11-2012 13.3.1 implicitly limits the mesh local link ID range to that of AID, since for mesh PS the local link ID must be indicated in the TIM IE, which only holds IEEE80211_MAX_AID bits. Also the code was allowing a local link ID of 0, but this is not correct since that TIM bit is used for indicating buffered mcast frames. Generate a random, unique, link ID from 1 - 2007, and drop a modulo conversion for the local link ID, but keep it for the peer link ID in case he chose something > MAX_AID. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: factor out plink event gatheringThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: factor out peering FSMThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> [fix some indentation, squash llid assignment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: assign sta plid earlyThomas Pedersen
If we store the peer link ID right after initializing a new neighbor, there is no need to do it later in the peering FSM. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: consolidate rcu unlocks in plink frame rxThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: factor peering frame processing into own functionThomas Pedersen
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: remove unused mesh_mgmt_ies_add() prototypeBob Copeland
Said function was removed some time ago. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: return -ENOMEM in mesh_plink_frame_txBob Copeland
All other paths return an error code, do the same here. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh_plink: don't ignore holding timerBob Copeland
The ignore_plink_timer flag is set when doing mod_timer() if the timer was not previously active. This is to avoid executing the timeout if del_timer() was subsequently called. However, del_timer() only happens if we are moving to ESTAB state or get a close frame while in HOLDING. We cannot leave HOLDING and re-enter ESTAB unless we receive a close frame (in which case ignore_plink_timer is already set) or if the timeout expires, so there actually isn't a case where this is needed on mod_timer(). Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh_plink: collapse the two switch statements togetherBob Copeland
The matches_local check can just be done when looking at the individual action types. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh: rewrite rssi_threshold_check in CBob Copeland
Use C instead of cpp for type checking. Also swap the arguments into the usual sdata -> sta order. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh_plink: group basic fitness checksBob Copeland
The initial frame checks differ depending on whether this is a new peer or not, but they were all intermixed with sta checks as necessary. Group them together so the two cases are clearer. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: mesh: factor out common plink close/estab codeBob Copeland
Reject and accepted close events always put the host in the holding state and compute a reason code based only on the current state. Likewise on establish we always do the same setup. Put these in functions to save some duplicated code. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: hold sta->lock across plink switch statementsBob Copeland
Rather than unlock at the end of each case, do it once after all is said and done. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: consolidate calls to plink_frame_txThomas Pedersen
Do all frame transfers in one place at the end of the big switch statements. sta->plid and sta->reason can be passed in any case, since they are only used for the frames that need them. Remove assignments to locals for values already stored in the sta structure. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix off-by-one in llid check.Bob Copeland
According to IEEE 802.11-2012 (8.4.2.104), no peering management element exists with length 7. This code is checking to see if llid is present to ignore close frames with different llid, which would be IEs with length 8. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: remove second argument from reg_process_hint()Luis R. Rodriguez
The iniator is already available to us, so use it. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: force WIPHY_FLAG_CUSTOM_REGULATORY on wiphy_apply_custom_regulatory()Luis R. Rodriguez
wiphy_apply_custom_regulatory() implies WIPHY_FLAG_CUSTOM_REGULATORY but we never enforced it, do that now and warn if the driver didn't set it. All drivers should be following this today already. Having WIPHY_FLAG_CUSTOM_REGULATORY does not however mean you will use wiphy_apply_custom_regulatory() though, you may have your own _orig value set up tools / helpers. The intel drivers are examples of this type of driver. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: DFS check chandef usable before CACJanusz Dziedzic
Check chandef we get in CAC request is usable for CAC. All channels have to be DFS channels. Allow DFS_USABLE and DFS_AVAILABLE channels mix. At least one channel has to be DFS_USABLE (require CAC). Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: add helper functions for start/end freqJanusz Dziedzic
Add helper fuctions for start/end freq. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: do not compute offset from ssn in Rx AMPDU reordering bufferKarl Beldan
Currently, frames that go into the reordering buffer are stored at index ieee80211_sn_sub(sn, tid_rx->ssn) % tid_rx->buf_size. The offset calculation to the starting sequence number (SSN) is useless and just adds overhead so simply use sn % tid_rx->buf_size. This means the reordering buffer will start to be filled somewhere in the middle (at SSN % buf_size) and continue to get used from there, but there's no reason to start from the beginning. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [rewrite commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: set hw initial idle stateKarl Beldan
ATM, the first call of ieee80211_do_open will configure the hw as non-idle, even if the interface being brought up is not a monitor, and this leads to inconsistent sequences like: register_hw() do_open(sta) hw_config(non-idle) (.. sta is non-idle ..) scan(sta) hw_config(idle) (after scan finishes) do_stop(sta) do_open(sta) (.. sta is idle ..) Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: use capped prob when computing throughputsKarl Beldan
Commit 3e8b1eb "mac80211/minstrel_ht: improve rate selection stability" introduced a local capped prob in minstrel_ht_calc_tp but omitted to use it to compute the per rate throughput. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: ignore supported rates for nonexistant bands on scanFelix Fietkau
Fixes wpa_supplicant p2p_find on 5GHz-only devices Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix connection pollingEliad Peller
Commit 392b9ff ("mac80211: change beacon/connection polling") removed the IEEE80211_STA_BEACON_POLL flag. However, it accidentally removed the setting of IEEE80211_STA_CONNECTION_POLL, making the connection polling completely useless (the flag is always clear, so the result is never being checked). Fix it. Signed-off-by: Eliad Peller <eliad@wizery.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix the mesh channel switch supportChun-Yeow Yeoh
Mesh STA receiving the mesh CSA action frame is not able to trigger the mesh channel switch due to the incorrect handling and comparison of mesh channel switch parameters element (MCSP)'s TTL. Make sure the MCSP's TTL is updated accordingly before calling the ieee80211_mesh_process_chnswitch. Also, we update the beacon before forwarding the CSA action frame, so MCSP's precedence value and initiator flag need to be updated prior to this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: don't attempt to reorder multicast framesJohannes Berg
Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Cc: stable@vger.kernel.org Reported-by: Blaise Gassend <blaise@suitabletech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: disable 5/10 MHz support for all driversJohannes Berg
Due to nl80211 API breakage, 5/10 MHz support is broken for all drivers. Fixing it requires adding new API, but that can't be done as a bugfix commit since that would require either updating all APIs in the trees needing the bugfix or cause different kernels to have incompatible API. Therefore, just disable 5/10 MHz support for all drivers. Cc: stable@vger.kernel.org [3.12] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: minstrel_ht: fix rates selectionKarl Beldan
When initializing rates selections starting indexes upon stats update, the minstrel_sta->max_* rates should be 'group * MCS_GROUP_RATES + i' not 'i'. This affects settings where one of the peers does not support any of the rates of the group 0 (i.e. when ht_cap.mcs.rx_mask[0] == 0). Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix for mesh beacon update on powersaveJavier Lopez
Mesh beacon was not being rebuild after user triggered a mesh powersave change. To solve this issue use ieee80211_mbss_info_change_notify instead of ieee80211_bss_info_change_notify. This helper function forces mesh beacon to be rebuild and then notifies the driver about the beacon change. Signed-off-by: Javier Lopez <jlopex@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix crash when using AP VLAN interfacesFelix Fietkau
Commit "mac80211: implement SMPS for AP" applies to AP_VLAN as well. It assumes that sta->sdata->vif.bss_conf.bssid is present, which did not get set for AP_VLAN. Initialize it to sdata->vif.addr like for other interface types. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: check nla_nest_start() return valueJohannes Berg
Coverity pointed out that we might dereference NULL later if nla_nest_start() returns a failure. This isn't really true since we'd bomb out before, but we should check the return value directly, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: fix error path in nl80211_get_key()Johannes Berg
Coverity pointed out that in the (practically impossible) error case we leak the message - fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25nl80211: check nla_put_* return valuesJohannes Berg
Coverity pointed out that in a few functions we don't check the return value of the nla_put_*() calls. Most of these are fairly harmless because the input isn't very dynamic and controlled by the kernel, but the pattern is simply wrong, so fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: fix scheduled scan rtnl deadlockJohannes Berg
When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Cc: stable@vger.kernel.org Fixes: 5fe231e87372 ("cfg80211: vastly simplify locking") Reported-and-tested-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25mac80211: DFS setup chandef for radar_event correctlyJanusz Dziedzic
Setup chandef for radar event correctly, before we will clear this in ieee80211_dfs_cac_cancel() function. Without this patch mac80211 will report wrong channel width in case we will get radar event during active CAC. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: fix ibss wext chandef creationSimon Wunderlich
The wext internal chandefs for ibss should be created using the cfg80211_chandef_create() functions. Initializing fields manually is error-prone. Reported-by: Dirk Gouders <dirk@gouders.net> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25Revert "mac80211: allow disable power save in mesh"Bob Copeland
This reverts commit ee1f668136b2fb6640ee2d54c2a525ea41f98211. The aformentioned commit added a check to allow 'iw wlan0 set power_save off' to work for mesh interfaces. However, this is problematic because it also allows 'iw wlan0 set power_save on', which will crash in short order because all of the subsequent code manipulates sdata->u.mgd. The power-saving states for mesh interfaces can be manipulated through the mesh config, e.g: 'iw wlan0 set mesh_param mesh_power_save=active' (which, despite the name, actualy disables power saving since the setting refers to the type of sleep the interface undergoes). Cc: stable@vger.kernel.org Fixes: ee1f668136b2 ("mac80211: allow disable power save in mesh") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-23sch_tbf: handle too small burstEric Dumazet
If a too small burst is inadvertently set on TBF, we might trigger a bug in tbf_segment(), as 'skb' instead of 'segs' was used in a qdisc_reshape_fail() call. tc qdisc add dev eth0 root handle 1: tbf latency 50ms burst 1KB rate 50mbit Fix the bug, and add a warning, as such configuration is not going to work anyway for non GSO packets. (For some reason, one has to use a burst >= 1520 to get a working configuration, even with old kernels. This is a probable iproute2/tc bug) Based on a report and initial patch from Yang Yingliang Fixes: e43ac79a4bc6 ("sch_tbf: segment too big GSO packets") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23ipv6: fix leaking uninitialized port number of offender sockaddrHannes Frederic Sowa
Offenders don't have port numbers, so set it to 0. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu ↵Hannes Frederic Sowa
functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23sit: generate icmpv6 error when receiving icmpv4 errorOussama Ghorbel
Send icmpv6 error with type "destination unreachable" and code "address unreachable" when receiving icmpv4 error and sufficient data bytes are available This patch enhances the compliance of sit tunnel with section 3.4 of rfc 4213 Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23tcp_memcg: remove useless var old_limGao feng
nobody needs it. remove. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23gro: Clean up tcpX_gro_receive checksum verificationHerbert Xu
This patch simplifies the checksum verification in tcpX_gro_receive by reusing the CHECKSUM_COMPLETE code for CHECKSUM_NONE. All it does for CHECKSUM_NONE is compute the partial checksum and then treat it as if it came from the hardware (CHECKSUM_COMPLETE). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23gro: Only verify TCP checksums for candidatesHerbert Xu
In some cases we may receive IP packets that are longer than their stated lengths. Such packets are never merged in GRO. However, we may end up computing their checksums incorrectly and end up allowing packets with a bogus checksum enter our stack with the checksum status set as verified. Since such packets are rare and not performance-critical, this patch simply skips the checksum verification for them. Reported-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Thanks, Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-23net: sctp: find the correct highest_new_tsn in sackChang Xiangzhong
Function sctp_check_transmitted(transport t, ...) would iterate all of transport->transmitted queue and looking for the highest __newly__ acked tsn. The original algorithm would depend on the order of the assoc->transport_list (in function sctp_outq_sack line 1215 - 1226). The result might not be the expected due to the order of the tranport_list. Solution: checking if the exising is smaller than the new one before assigning Signed-off-by: Chang Xiangzhong <changxiangzhong@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar Karwar. 2) skb_segment() can choke on packets using frag lists, fix from Herbert Xu with help from Eric Dumazet and others. 3) IPv4 output cached route instantiation properly handles races involving two threads trying to install the same route, but we forgot to propagate this logic to input routes as well. Fix from Alexei Starovoitov. 4) Put protections in place to make sure that recvmsg() paths never accidently copy uninitialized memory back into userspace and also make sure that we never try to use more that sockaddr_storage for building the on-kernel-stack copy of a sockaddr. Fixes from Hannes Frederic Sowa. 5) R8152 driver transmit flow bug fixes from Hayes Wang. 6) Fix some minor fallouts from genetlink changes, from Johannes Berg and Michael Opdenacker. 7) AF_PACKET sendmsg path can race with netdevice unregister notifier, fix by using RCU to make sure the network device doesn't go away from under us. Fix from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) gso: handle new frag_list of frags GRO packets genetlink: fix genl_set_err() group ID genetlink: fix genlmsg_multicast() bug packet: fix use after free race in send path when dev is released xen-netback: stop the VIF thread before unbinding IRQs wimax: remove dead code net/phy: Add the autocross feature for forced links on VSC82x4 net/phy: Add VSC8662 support net/phy: Add VSC8574 support net/phy: Add VSC8234 support net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage) net: rework recvmsg handler msg_name and msg_namelen logic bridge: flush br's address entry in fdb when remove the net: core: Always propagate flag changes to interfaces ipv4: fix race in concurrent ip_route_input_slow() r8152: fix incorrect type in assignment r8152: support stopping/waking tx queue r8152: modify the tx flow r8152: fix tx/rx memory overflow netfilter: ebt_ip6: fix source and destination matching ...
2013-11-21kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS cleanlyYuanhan Liu
Remove CONFIG_USE_GENERIC_SMP_HELPERS left by commit 0a06ff068f12 ("kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS"). Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-09-13 20:53:17 +0000