summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2018-01-24dev_ioctl(): move copyin/copyout to callersAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24ipconfig: use dev_set_mtu()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24lift handling of SIOCIW... out of dev_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24kill dev_ifname32()Al Viro
same story... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24kill bond_ioctl()Al Viro
Same story as with dev_ifsioc(), except that the last cases with non-trivial conversions had been taken out in 2013... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24kill dev_ifsioc()Al Viro
Once upon a time net/socket.c:dev_ifsioc() used to handle SIOCSHWTSTAMP and SIOCSIFMAP. These have different native and compat layout, so the format conversion had been needed. In 2009 these two cases had been taken out, turning the rest into a convoluted way to calling sock_do_ioctl(). We copy compat structure into native one, call sock_do_ioctl() on that and copy the result back for the in/out ioctls. No layout transformation anywhere, so we might as well just call sock_do_ioctl() and skip all the headache with copying. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24ip_rt_ioctl(): take copyin to callerAl Viro
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24devinet_ioctl(): take copyin/copyout to callerAl Viro
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24net: separate SIOCGIFCONF handling from dev_ioctl()Al Viro
Only two of dev_ioctl() callers may pass SIOCGIFCONF to it. Separating that codepath from the rest of dev_ioctl() allows both to simplify dev_ioctl() itself (all other cases work with struct ifreq *) *and* seriously simplify the compat side of that beast: all it takes is passing to inet_gifconf() an extra argument - the size of individual records (sizeof(struct ifreq) or sizeof(struct compat_ifreq)). With dev_ifconf() called directly from sock_do_ioctl()/compat_dev_ifconf() that's easy to arrange. As the result, compat side of SIOCGIFCONF doesn't need any allocations, copy_in_user() back and forth, etc. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-24ip_tunnel: Use mark in skb by defaultThomas Winter
This allows marks set by connmark in iptables to be used for route lookups. Signed-off-by: Thomas Winter <thomas.winter@alliedtelesis.co.nz> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_u32: propagate extack to delete callbackJakub Kicinski
Propagate extack on removal of offloaded filter. Don't pass extack from error paths. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_u32: pass offload flags to tc_cls_common_offload_init()Jakub Kicinski
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. hnodes need to hold onto the flags now to be able to reuse them on filter removal. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_flower: propagate extack to delete callbackJakub Kicinski
Propagate extack on removal of offloaded filter. Don't pass extack from error paths. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_flower: pass offload flags to tc_cls_common_offload_init()Jakub Kicinski
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_matchall: propagate extack to delete callbackJakub Kicinski
Propagate extack on removal of offloaded filter. Don't pass extack from error paths. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_matchall: pass offload flags to tc_cls_common_offload_init()Jakub Kicinski
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_bpf: propagate extack to offload delete callbackJakub Kicinski
Propagate extack on removal of offloaded filter. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_bpf: pass offload flags to tc_cls_common_offload_init()Jakub Kicinski
Pass offload flags to the new implementation of tc_cls_common_offload_init(). Extack will now only be set if user requested skip_sw. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cls_bpf: remove gen_flags from bpf_offloadJakub Kicinski
cls_bpf now guarantees that only device-bound programs are allowed with skip_sw. The drivers no longer pay attention to flags on filter load, therefore the bpf_offload member can be removed. If flags are needed again they should probably be added to struct tc_cls_common_offload instead. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net: sched: prepare for reimplementation of tc_cls_common_offload_init()Jakub Kicinski
Rename the tc_cls_common_offload_init() helper function to tc_cls_common_offload_init_deprecated() and add a new implementation which also takes flags argument. We will only set extack if flags indicate that offload is forced (skip_sw) otherwise driver errors should be ignored, as they don't influence the overall filter installation. Note that we need the tc_skip_hw() helper for new version, therefore it is added later in the file. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net: sched: propagate extack to cls->destroy callbacksJakub Kicinski
Propagate extack to cls->destroy callbacks when called from non-error paths. On error paths pass NULL to avoid overwriting the failure message. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24kcm: Check if sk_user_data already set in kcm_attachTom Herbert
This is needed to prevent sk_user_data being overwritten. The check is done under the callback lock. This should prevent a socket from being attached twice to a KCM mux. It also prevents a socket from being attached for other use cases of sk_user_data as long as the other cases set sk_user_data under the lock. Followup work is needed to unify all the use cases of sk_user_data to use the same locking. Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24kcm: Only allow TCP sockets to be attached to a KCM muxTom Herbert
TCP sockets for IPv4 and IPv6 that are not listeners or in closed stated are allowed to be attached to a KCM mux. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Clean read user supplied flag messDmitry Safonov
Don't use error-prone-brute-force way. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Remove brute-force printing of flagsDmitry Safonov
Add macro generated pkt_flag_names array, with a little help of which the flags can be printed by using an index. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Add behaviour flags macro to generate flags/namesDmitry Safonov
PKT_FALGS macro will be used to add package behavior names definitions to simplify the code that prints/reads pkg flags. Sorted the array in order of printing the flags in pktgen_if_show() Note: Renamed IPSEC_ON => IPSEC for simplicity. No visible behavior change expected. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24pktgen: Add missing !flag parametersDmitry Safonov
o FLOW_SEQ now can be disabled with pgset "flag !FLOW_SEQ" o FLOW_SEQ and FLOW_RND are antonyms, as it's shown by pktgen_if_show() o IPSEC now may be disabled Note, that IPV6 is enabled with dst6/src6 parameters, not with a flag parameter. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net: sched: em_nbyte: don't add the data offset twiceWolfgang Bumiller
'ptr' is shifted by the offset and then validated, the memcmp should not add it a second time. Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: continue waiting if peer signals write_shutdownUrsula Braun
If the peer sends a shutdown WRITE, this should not affect sending in general, and waiting for send buffer space in particular. Stop waiting of the local socket for send buffer space only, if peer signals closing, but not if peer signals just shutdown WRITE. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: improve state change handling after close waitUrsula Braun
When a socket is closed or shutdown, smc waits for data being transmitted in certain states. If the state changes during this wait, the close switch depending on state should be reentered. In addition, state change is avoided if sending of close or shutdown fails. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: make wait for work request uninterruptibleUrsula Braun
Work requests are needed for every ib_post_send(), among them the ib_post_send() to signal closing. If an smc socket program is cancelled, the smc connections should be cleaned up, and require sending of closing signals to the peer. This may fail, if a wait for a free work request is needed, but is cancelled immediately due to the cancel interrupt. To guarantee notification of the peer, the wait for a work request is changed to uninterruptible. And the area to receive work request completion info with ib_poll_cq() is cleared first. And _tx_ variable names are used in the _tx_routines for the demultiplexing common type in the header. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: get rid of tx_pend waits in socket closingUrsula Braun
There is no need to wait for confirmation of pending tx requests for a closing connection, since pending tx slots are dismissed when finishing a connection. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: simplify function smc_clcsock_accept()Ursula Braun
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: use local struct sock variables consistentlyUrsula Braun
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-01-24 1) Only offloads SAs after they are fully initialized. Otherwise a NIC may receive packets on a SA we can not yet handle in the stack. From Yossi Kuperman. 2) Fix negative refcount in case of a failing offload. From Aviad Yehezkel. 3) Fix inner IP ptoro version when decapsulating from interaddress family tunnels. From Yossi Kuperman. 4) Use true or false for boolean variables instead of an integer value in xfrm_get_type_offload. From Gustavo A. R. Silva. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABELBen Hutchings
Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net/sched: act_csum: don't use spinlock in the fast pathDavide Caratti
use RCU instead of spin_{,unlock}_bh() to protect concurrent read/write on act_csum configuration, to reduce the effects of contention in the data path when multiple readers are present. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net/sched: act_csum: use per-core statisticsDavide Caratti
use per-CPU counters, like other TC actions do, instead of maintaining one set of stats across all cores. This allows updating act_csum stats without the need of protecting them using spin_{,un}lock_bh() invocations. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: link_watch: mark bonding link events urgentRoopa Prabhu
It takes 1sec for bond link down notification to hit user-space when all slaves of the bond go down. 1sec is too long for protocol daemons in user-space relying on bond notification to recover (eg: multichassis lag implementations in user-space). Since the link event code already marks team device port link events as urgent, this patch moves the code to cover all lag ports and master. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: dsa: Support internal phy on 'cpu' portSebastian Reichel
This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in 'net'. The esp{4,6}_offload.c conflicts were overlapping changes. The 'out' label is removed so we just return ERR_PTR(-EINVAL) directly. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23sctp: reset ret in again path in sctp_for_each_transportXin Long
Commit 97a6ec4ac021 ("rhashtable: Change rhashtable_walk_start to return void") only initialized ret for the first time, when going to again path, the next tsp could be NULL. Without resetting ret, cb_done would be called with tsp as NULL. A kernel crash was caused by this when running sctpdiag testcase in sctp-tests. Note that this issue doesn't affect net.git yet. Fixes: 97a6ec4ac021 ("rhashtable: Change rhashtable_walk_start to return void") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: core: Fix kernel-doc for netdev_upper_link()Florian Fainelli
Fixes the following warnings: ./net/core/dev.c:6438: warning: No description found for parameter 'extack' ./net/core/dev.c:6461: warning: No description found for parameter 'extack' Fixes: 42ab19ee9029 ("net: Add extack to upper device linking") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: core: Fix kernel-doc for call_netdevice_notifiers_info()Florian Fainelli
Remove the @dev comment, since we do not have a net_device argument, fixes the following kernel doc warning: /net/core/dev.c:1707: warning: Excess function parameter 'dev' description in 'call_netdevice_notifiers_info' Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23xfrm: fix boolean assignment in xfrm_get_type_offloadGustavo A. R. Silva
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Fixes: ffdb5211da1c ("xfrm: Auto-load xfrm offload modules") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-23xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP versionYossi Kuperman
IPSec tunnel mode supports encapsulation of IPv4 over IPv6 and vice-versa. The outer IP header is stripped and the inner IP inherits the original Ethernet header. Tcpdump fails to properly decode the inner packet in case that h_proto is different than the inner IP version. Fix h_proto to reflect the inner IP version. Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-22net: sched: add extack support for offload via tc_cls_common_offloadQuentin Monnet
Add extack support for hardware offload of classifiers. In order to achieve this, a pointer to a struct netlink_ext_ack is added to the struct tc_cls_common_offload that is passed to the callback for setting up the classifier. Function tc_cls_common_offload_init() is updated to support initialization of this new attribute. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_bpf: plumb extack support in filter for hardware offloadQuentin Monnet
Pass the extack pointer obtained in the `->change()` filter operation to cls_bpf_offload() and then to cls_bpf_offload_cmd(). This makes it possible to use this extack pointer in drivers offloading BPF programs in a future patch. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_u32: propagate extack support for filter offloadQuentin Monnet
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_u32. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: sched: cls_matchall: propagate extack support for filter offloadQuentin Monnet
Propagate the extack pointer from the `->change()` classifier operation to the function used for filter replacement in cls_matchall. This makes it possible to use netlink extack messages in the future at replacement time for this filter, although it is not used at this point. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 07:03:17 +0000