summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-08-13Merge tag 'mac80211-next-for-davem-2016-08-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Not much for -next so far, but here it goes: * send more nl80211 events for interfaces * remove useless network/transport offset mangling code * validate beacon intervals identically for all interface types * use driver rate estimates for mesh * fix a compiler type/signedness warning ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net/sctp: always initialise sctp_ht_iter::start_failVegard Nossum
sctp_transport_seq_start() does not currently clear iter->start_fail on success, but relies on it being zero when it is allocated (by seq_open_net()). This can be a problem in the following sequence: open() // allocates iter (and implicitly sets iter->start_fail = 0) read() - iter->start() // fails and sets iter->start_fail = 1 - iter->stop() // doesn't call sctp_transport_walk_stop() (correct) read() again - iter->start() // succeeds, but doesn't change iter->start_fail - iter->stop() // doesn't call sctp_transport_walk_stop() (wrong) We should initialize sctp_ht_iter::start_fail to zero if ->start() succeeds, otherwise it's possible that we leave an old value of 1 there, which will cause ->stop() to not call sctp_transport_walk_stop(), which causes all sorts of problems like not calling rcu_read_unlock() (and preempt_enable()), eventually leading to more warnings like this: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2 Preemption disabled at:[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff81149abb>] preempt_count_add+0x1fb/0x280 [<ffffffff83295892>] _raw_spin_lock+0x12/0x40 [<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff82ec665f>] sctp_transport_walk_start+0x2f/0x60 [<ffffffff82edda1d>] sctp_transport_seq_start+0x4d/0x150 [<ffffffff81439e50>] traverse+0x170/0x850 [<ffffffff8143aeec>] seq_read+0x7cc/0x1180 [<ffffffff814f996c>] proc_reg_read+0xbc/0x180 [<ffffffff813d0384>] do_loop_readv_writev+0x134/0x210 [<ffffffff813d2a95>] do_readv_writev+0x565/0x660 [<ffffffff813d6857>] vfs_readv+0x67/0xa0 [<ffffffff813d6c16>] do_preadv+0x126/0x170 [<ffffffff813d710c>] SyS_preadv+0xc/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83296225>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Notice that this is a subtly different stacktrace from the one in commit 5fc382d875 ("net/sctp: terminate rhashtable walk correctly"). Cc: Xin Long <lucien.xin@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-By: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13net/irda: handle iriap_register_lsap() allocation failureVegard Nossum
If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [<ffffffff82344f40>] dump_stack+0xac/0xfc [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411 [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970 [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160 [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0 [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120 [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0 [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630 [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0 [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340 [<ffffffff833c7e09>] SyS_connect+0x9/0x10 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13bpf: fix write helpers with regards to non-linear partsDaniel Borkmann
Fix the bpf_try_make_writable() helper and all call sites we have in BPF, it's currently defect with regards to skbs when the write_len spans into non-linear parts, no matter if cloned or not. There are multiple issues at once. First, using skb_store_bits() is not correct since even if we have a cloned skb, page frags can still be shared. To really make them private, we need to pull them in via __pskb_pull_tail() first, which also gets us a private head via pskb_expand_head() implicitly. This is for helpers like bpf_skb_store_bytes(), bpf_l3_csum_replace(), bpf_l4_csum_replace(). Really, the only thing reasonable and working here is to call skb_ensure_writable() before any write operation. Meaning, via pskb_may_pull() it makes sure that parts we want to access are pulled in and if not does so plus unclones the skb implicitly. If our write_len still fits the headlen and we're cloned and our header of the clone is not writable, then we need to make a private copy via pskb_expand_head(). skb_store_bits() is a bit misleading and only safe to store into non-linear data in different contexts such as 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory"). For above BPF helper functions, it means after fixed bpf_try_make_writable(), we've pulled in enough, so that we operate always based on skb->data. Thus, the call to skb_header_pointer() and skb_store_bits() becomes superfluous. In bpf_skb_store_bytes(), the len check is unnecessary too since it can only pass in maximum of BPF stack size, so adding offset is guaranteed to never overflow. Also bpf_l3/4_csum_replace() helpers must test for proper offset alignment since they use __sum16 pointer for writing resulting csum. The remaining helpers that change skb data not discussed here yet are bpf_skb_vlan_push(), bpf_skb_vlan_pop() and bpf_skb_change_proto(). The vlan helpers internally call either skb_ensure_writable() (pop case) and skb_cow_head() (push case, for head expansion), respectively. Similarly, bpf_skb_proto_xlat() takes care to not mangle page frags. Fixes: 608cd71a9c7c ("tc: bpf: generalize pedit action") Fixes: 91bc4822c3d6 ("tc: bpf: add checksum helpers") Fixes: 3697649ff29e ("bpf: try harder on clones when writing into skb") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-13calipso: fix resource leak on calipso_genopt failureColin Ian King
Currently, if calipso_genopt fails then the error exit path does not free the ipv6_opt_hdr new causing a memory leak. Fix this by kfree'ing new on the error exit path. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12bpf: fix bpf_skb_in_cgroup helper namingDaniel Borkmann
While hashing out BPF's current_task_under_cgroup helper bits, it came to discussion that the skb_in_cgroup helper name was suboptimally chosen. Tejun says: So, I think in_cgroup should mean that the object is in that particular cgroup while under_cgroup in the subhierarchy of that cgroup. Let's rename the other subhierarchy test to under too. I think that'd be a lot less confusing going forward. [...] It's more intuitive and gives us the room to implement the real "in" test if ever necessary in the future. Since this touches uapi bits, we need to change this as long as v4.8 is not yet officially released. Thus, change the helper enum and rename related bits. Fixes: 4a482f34afcc ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") Reference: http://patchwork.ozlabs.org/patch/658500/ Suggested-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
2016-08-12sit: make function ipip6_valid_ip_proto() staticWei Yongjun
Fixes the following sparse warning: net/ipv6/sit.c:1129:6: warning: symbol 'ipip6_valid_ip_proto' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12Merge tag 'batadv-next-for-davem-20160812' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature patchset includes the following changes (mostly chronological order): - bump version strings, by Simon Wunderlich - kerneldoc clean up, by Sven Eckelmann - enable RTNL automatic loading and according documentation changes, by Sven Eckelmann (2 patches) - fix/improve interface removal and associated locking, by Sven Eckelmann (3 patches) - clean up unused variables, by Linus Luessing - implement Gateway selection code for B.A.T.M.A.N. V by Antonio Quartulli (4 patches) - rewrite TQ comparison by Markus Pargmann - fix Cocinelle warnings on bool vs integers (by Fenguang Wu/Intels kbuild test robot) and bitwise arithmetic operations (by Linus Luessing) - rewrite packet creation for forwarding for readability and to avoid reference count mistakes, by Linus Luessing - use kmem_cache for translation table, which results in more efficient storing of translation table entries, by Sven Eckelmann - rewrite/clarify reference handling for send_skb_unicast, by Sven Eckelmann - fix debug messages when updating routes, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-12Merge tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user needs multiple different security services (e.g. krb5i and krb5p). - Stable patch to fix a regression introduced by the use of SO_REUSEPORT, and that prevented the use of multiple different NFS versions to the same server. - TCP socket reconnection timer fixes. - Patch from Neil to disable the use of IPv6 temporary addresses" * tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Cap the transport reconnection timer at 1/2 lease period NFSv4: Cleanup the setting of the nfs4 lease period SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout SUNRPC: Fix reconnection timeouts NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED SUNRPC: disable the use of IPv6 temporary addresses. SUNRPC: allow for upcalls for same uid but different gss service SUNRPC: Fix up socket autodisconnect SUNRPC: Handle EADDRNOTAVAIL on connection failures
2016-08-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes and cleanups from Michael Tsirkin: "Misc fixes and cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: deprecate old transport virtio/s390: keep early_put_chars virtio_blk: Fix a slient kernel panic virtio-vsock: fix include guard typo vhost/vsock: fix vhost virtio_vsock_pkt use-after-free 9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc() virtio: fix error handling for debug builds virtio: fix memory leak in virtqueue_add()
2016-08-11nl80211: explicitly check enum nl80211_mesh_power_modeJohannes Berg
Different gcc versions appear to be treating enum with different signedness, causing warnings with the out parameter one way or the other. Just use the correct type to avoid all that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11mac80211: call get_expected_throughput only after adding stationMaxim Altshul
Depending on which method the driver implements, userspace could call this (indirectly, by getting station info) before the driver knows about the station, possibly causing it to misbehave. Therefore, add a check for sta->uploaded which indicates that the driver knows about the station. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11cfg80211: identically validate beacon interval for AP/MESH/IBSSPurushottam Kushwaha
Beacon interval interface combinations validation was missing for MESH/IBSS join, add those. Johannes: also move the beacon interval check disallowing really tiny and really big intervals into the common function, which adds it for AP mode. Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11cfg80211: always notify userspace when wireless netdev is removedDenis Kenzior
This change alters the semantics of NL80211_CMD_DEL_INTERFACE events by always sending this event whenever a net_device object associated with a wdev is destroyed. Prior to this change, this event was only emitted as a result of NL80211_CMD_DEL_INTERFACE command sent from userspace. This allows userspace to reliably detect when wireless interfaces have been removed, e.g. due to USB removal events, etc. For wireless device objects without an associated net_device (e.g. NL80211_IFTYPE_P2P_DEVICE), the NL80211_CMD_DEL_INTERFACE event is now generated inside cfg80211_unregister_wdev. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11cfg80211: always notify userspace of new wireless netdevsDenis Kenzior
This change alters the semantics of NL80211_CMD_NEW_INTERFACE events by always sending this event whenever a new net_device object associated with a wdev is registered. Prior to this change, this event was only sent as a result of NL80211_CMD_NEW_INTERFACE command sent from userspace. This allows userspace to reliably detect new wireless interfaces (e.g. due to hardware hot-plug events, etc). For wdevs created without an associated net_device object (e.g. NL80211_IFTYPE_P2P_DEVICE), the NL80211_CMD_NEW_INTERFACE event is still generated inside the relevant nl80211 command handler. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11mac80211: remove skb header offset mangling in ieee80211_build_hdrFelix Fietkau
Since the code only touches the MAC headers, the offsets to the network/transport headers remain the same throughout this function. Remove pointless pieces of code that try to 'preserve' them. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-11mac80211: mesh: Add support for HW RC implementationMaxim Altshul
Mesh HWMP module will be able to rely on the HW RC algorithm if it exists, for path metric calculations. This allows the metric calculation mechanism to calculate a correct metric, based on PER and last TX rate both via HW RC algorithm if it exists or via parameters collected by the SW. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-08-10openvswitch: do not ignore netdev errors when creating tunnel vportsMartynas Pumputis
The creation of a tunnel vport (geneve, gre, vxlan) brings up a corresponding netdev, a multi-step operation which can fail. For example, changing a vxlan vport's netdev state to 'up' binds the vport's socket to a UDP port - if the binding fails (e.g. due to the port being in use), the error is currently ignored giving the appearance that the tunnel vport creation completed successfully. Signed-off-by: Martynas Pumputis <martynas@weave.works> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10tipc: fix variable dereference before NULL checkParthasarathy Bhuvaragan
In commit cf6f7e1d5109 ("tipc: dump monitor attributes"), I dereferenced a pointer before checking if its valid. This is reported by static check Smatch as: net/tipc/monitor.c:733 tipc_nl_add_monitor_peer() warn: variable dereferenced before check 'mon' (see line 731) In this commit, we check for a valid monitor before proceeding with any other operation. Fixes: cf6f7e1d5109 ("tipc: dump monitor attributes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10rps: Inspect PPTP encapsulated by GRE to get flow hashGao Feng
The PPTP is encapsulated by GRE header with that GRE_VERSION bits must contain one. But current GRE RPS needs the GRE_VERSION must be zero. So RPS does not work for PPTP traffic. In my test environment, there are four MIPS cores, and all traffic are passed through by PPTP. As a result, only one core is 100% busy while other three cores are very idle. After this patch, the usage of four cores are balanced well. Signed-off-by: Gao Feng <fgao@ikuai8.com> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: sched: convert qdisc linked list to hashtableJiri Kosina
Convert the per-device linked list into a hashtable. The primary motivation for this change is that currently, we're not tracking all the qdiscs in hierarchy (e.g. excluding default qdiscs), as the lookup performed over the linked list by qdisc_match_from_root() is rather expensive. The ultimate goal is to get rid of hidden qdiscs completely, which will bring much more determinism in user experience. Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: resolve symbol conflicts with generic hashtable.hJiri Kosina
This is a preparatory patch for converting qdisc linked list into a hashtable. As we'll need to include hashtable.h in netdevice.h, we first have to make sure that this will not introduce symbol conflicts for any of the netdevice.h users. Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Use mod_timer_pending() to avoid reactivating a dead expectation in the h323 conntrack helper, from Liping Zhang. 2) Oneliner to fix a type in the register name defined in the nf_tables header. 3) Don't try to look further when we find an inactive elements with no descendants in the rbtree set implementation, otherwise we crash. 4) Handle valid zero CSeq in the SIP conntrack helper, from Christophe Leroy. 5) Don't display a trailing slash in conntrack helper with no classes via /proc/net/nf_conntrack_expect, from Liping Zhang. 6) Fix an expectation leak during creation from the nfqueue path, again from Liping Zhang. 7) Validate netlink port ID in verdict message from nfqueue, otherwise an injection can be possible. Again from Zhang. 8) Reject conntrack tuples with different transport protocol on original and reply tuples, also from Zhang. 9) Validate offset and length in nft_exthdr, make sure they are under sizeof(u8), from Laura Garcia Liebana. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10net: ipconfig: fix use after freeUwe Kleine-König
ic_close_devs() calls kfree() for all devices's ic_device. Since commit 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") the active device's ic_device is still used however to print the ipconfig summary which results in an oops if the memory is already changed. So delay freeing until after the autoconfig results are reported. Fixes: 2647cffb2bc6 ("net: ipconfig: Support using "delayed" DHCP replies") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-10netfilter: nft_exthdr: Add size check on u8 nft_exthdr attributesLaura Garcia Liebana
Fix the direct assignment of offset and length attributes included in nft_exthdr structure from u32 data to u8. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09bridge: Fix problems around fdb entries pointing to the bridge deviceToshiaki Makita
Adding fdb entries pointing to the bridge device uses fdb_insert(), which lacks various checks and does not respect added_by_user flag. As a result, some inconsistent behavior can happen: * Adding temporary entries succeeds but results in permanent entries. * Same goes for "dynamic" and "use". * Changing mac address of the bridge device causes deletion of user-added entries. * Replacing existing entries looks successful from userspace but actually not, regardless of NLM_F_EXCL flag. Use the same logic as other entries and fix them. Fixes: 3741873b4f73 ("bridge: allow adding of fdb entries pointing to the bridge device") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09net: Remove fib_local variableDavid Ahern
After commit 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") fib_local is set but not used. Remove it. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09vti: flush x-netns xfrm cache when vti interface is removedLance Richardson
When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09rxrpc: Free packets discarded in data_readyDavid Howells
Under certain conditions, the data_ready handler will discard a packet. These need to be freed. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Fix a use-after-push in data_ready handlerDavid Howells
Fix a use of a packet after it has been enqueued onto the packet processing queue in the data_ready handler. Once on a call's Rx queue, we mustn't touch it any more as it may be dequeued and freed by the call processor running on a work queue. Save the values we need before enqueuing. Without this, we can get an oops like the following: BUG: unable to handle kernel NULL pointer dereference at 000000000000009c IP: [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] PGD 0 Oops: 0000 [#1] SMP Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G E 4.7.0-fsdevel+ #1336 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff88040d6863c0 task.stack: ffff88040d68c000 RIP: 0010:[<ffffffffa01854e8>] [<ffffffffa01854e8>] rxrpc_fast_process_packet+0x724/0xa11 [af_rxrpc] RSP: 0018:ffff88041fb03a78 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff8803ff195b00 RCX: 0000000000000001 RDX: ffffffffa01854d1 RSI: 0000000000000008 RDI: ffff8803ff195b00 RBP: ffff88041fb03ab0 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88041fb038c8 R11: 0000000000000000 R12: ffff880406874800 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000009c CR3: 0000000001c14000 CR4: 00000000001406e0 Stack: ffff8803ff195ea0 ffff880408348800 ffff880406874800 ffff8803ff195b00 ffff880408348800 ffff8803ff195ed8 0000000000000000 ffff88041fb03af0 ffffffffa0186072 0000000000000000 ffff8804054da000 0000000000000000 Call Trace: <IRQ> [<ffffffffa0186072>] rxrpc_data_ready+0x89d/0xbae [af_rxrpc] [<ffffffff814c94d7>] __sock_queue_rcv_skb+0x24c/0x2b2 [<ffffffff8155c59a>] __udp_queue_rcv_skb+0x4b/0x1bd [<ffffffff8155e048>] udp_queue_rcv_skb+0x281/0x4db [<ffffffff8155ea8f>] __udp4_lib_rcv+0x7ed/0x963 [<ffffffff8155ef9a>] udp_rcv+0x15/0x17 [<ffffffff81531d86>] ip_local_deliver_finish+0x1c3/0x318 [<ffffffff81532544>] ip_local_deliver+0xbb/0xc4 [<ffffffff81531bc3>] ? inet_del_offload+0x40/0x40 [<ffffffff815322a9>] ip_rcv_finish+0x3ce/0x42c [<ffffffff81532851>] ip_rcv+0x304/0x33d [<ffffffff81531edb>] ? ip_local_deliver_finish+0x318/0x318 [<ffffffff814dff9d>] __netif_receive_skb_core+0x601/0x6e8 [<ffffffff814e072e>] __netif_receive_skb+0x13/0x54 [<ffffffff814e082a>] netif_receive_skb_internal+0xbb/0x17c [<ffffffff814e1838>] napi_gro_receive+0xf9/0x1bd [<ffffffff8144eb9f>] rtl8169_poll+0x32b/0x4a8 [<ffffffff814e1c7b>] net_rx_action+0xe8/0x357 [<ffffffff81051074>] __do_softirq+0x1aa/0x414 [<ffffffff810514ab>] irq_exit+0x3d/0xb0 [<ffffffff810184a2>] do_IRQ+0xe4/0xfc [<ffffffff81612053>] common_interrupt+0x93/0x93 <EOI> [<ffffffff814af837>] ? cpuidle_enter_state+0x1ad/0x2be [<ffffffff814af832>] ? cpuidle_enter_state+0x1a8/0x2be [<ffffffff814af96a>] cpuidle_enter+0x12/0x14 [<ffffffff8108956f>] call_cpuidle+0x39/0x3b [<ffffffff81089855>] cpu_startup_entry+0x230/0x35d [<ffffffff810312ea>] start_secondary+0xf4/0xf7 Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Once packet posted in data_ready, don't retry postingDavid Howells
Once a packet has been posted to a connection in the data_ready handler, we mustn't try reposting if we then find that the connection is dying as the refcount has been given over to the dying connection and the packet might no longer exist. Losing the packet isn't a problem as the peer will retransmit. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Don't access connection from call if pointer is NULLDavid Howells
The call state machine processor sets up the message parameters for a UDP message that it might need to transmit in advance on the basis that there's a very good chance it's going to have to transmit either an ACK or an ABORT. This requires it to look in the connection struct to retrieve some of the parameters. However, if the call is complete, the call connection pointer may be NULL to dissuade the processor from transmitting a message. However, there are some situations where the processor is still going to be called - and it's still going to set up message parameters whether it needs them or not. This results in a NULL pointer dereference at: net/rxrpc/call_event.c:837 To fix this, skip the message pre-initialisation if there's no connection attached. Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09rxrpc: Need to flag call as being released on connect failureDavid Howells
If rxrpc_new_client_call() fails to make a connection, the call record that it allocated needs to be marked as RXRPC_CALL_RELEASED before it is passed to rxrpc_put_call() to indicate that it no longer has any attachment to the AF_RXRPC socket. Without this, an assertion failure may occur at: net/rxrpc/call_object:635 Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-099p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()Vegard Nossum
The memory allocated by iov_iter_get_pages_alloc() can be allocated with vmalloc() if kmalloc() failed -- see get_pages_array(). In that case we need to free it with vfree(), so let's use kvfree(). The bug manifests like this: BUG: unable to handle kernel paging request at ffffeb0400072da0 IP: [<ffffffff8139c67b>] kfree+0x4b/0x140 PGD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 675 Comm: trinity-c2 Not tainted 4.7.0-rc7+ #14 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800badef2c0 ti: ffff880069208000 task.ti: ffff880069208000 RIP: 0010:[<ffffffff8139c67b>] [<ffffffff8139c67b>] kfree+0x4b/0x140 RSP: 0000:ffff88006920f3f0 EFLAGS: 00010282 RAX: ffffea0000000000 RBX: ffffc90001cb6000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffffc90001cb6000 RBP: ffff88006920f410 R08: 0000000000000000 R09: dffffc0000000000 R10: ffff8800badefa30 R11: 0000056a3d3b0d9f R12: ffff88006920f620 R13: ffffeb0400072d80 R14: ffff8800baa94078 R15: 0000000000000000 FS: 00007fbd2b437700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffeb0400072da0 CR3: 000000006926d000 CR4: 00000000000006e0 Stack: 0000000000000001 ffff88006920f620 ffffed001755280f ffff8800baa94078 ffff88006920f6a8 ffffffff8310442b dffffc0000000000 ffff8800badefa30 ffff8800badefa28 ffff88011af1fba0 1ffff1000d241e98 ffff8800ba892150 Call Trace: [<ffffffff8310442b>] p9_virtio_zc_request+0x72b/0xdb0 [<ffffffff830f2116>] p9_client_zc_rpc.constprop.8+0x246/0xb10 [<ffffffff830f5d79>] p9_client_read+0x4c9/0x750 [<ffffffff8175ceac>] v9fs_fid_readpage+0x14c/0x320 [<ffffffff8175d0b6>] v9fs_vfs_readpage+0x36/0x50 [<ffffffff812c6f13>] filemap_fault+0x9a3/0xe60 [<ffffffff81331878>] __do_fault+0x158/0x300 [<ffffffff81339e01>] handle_mm_fault+0x1cf1/0x3c80 [<ffffffff810c0aaa>] __do_page_fault+0x30a/0x8e0 [<ffffffff810c10df>] do_page_fault+0x2f/0x80 [<ffffffff810b5b07>] do_async_page_fault+0x27/0xa0 [<ffffffff83296c48>] async_page_fault+0x28/0x30 Code: 00 80 41 54 53 49 01 fd 48 0f 42 05 b0 39 67 02 48 89 fb 49 01 c5 48 b8 00 00 00 00 00 ea ff ff 49 c1 ed 0c 49 c1 e5 06 49 01 c5 <49> 8b 45 20 48 8d 50 ff a8 01 4c 0f 45 ea 49 8b 55 20 48 8d 42 RIP [<ffffffff8139c67b>] kfree+0x4b/0x140 RSP <ffff88006920f3f0> CR2: ffffeb0400072da0 ---[ end trace f3d59a04bafec038 ]--- Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-09rxrpc: fix uninitialized pointer dereference in debug codeArnd Bergmann
A newly added bugfix caused an uninitialized variable to be used for printing debug output. This is harmless as long as the debug setting is disabled, but otherwise leads to an immediate crash. gcc warns about this when -Wmaybe-uninitialized is enabled: net/rxrpc/call_object.c: In function 'rxrpc_release_call': net/rxrpc/call_object.c:496:163: error: 'sp' may be used uninitialized in this function [-Werror=maybe-uninitialized] The initialization was removed but one of the users remains. This adds back the initialization. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 372ee16386bb ("rxrpc: Fix races between skb free, ACK generation and replying") Signed-off-by: David Howells <dhowells@redhat.com>
2016-08-09netfilter: ctnetlink: reject new conntrack request with different l4protoLiping Zhang
Currently, user can add a conntrack with different l4proto via nfnetlink. For example, original tuple is TCP while reply tuple is SCTP. This is invalid combination, we should report EINVAL to userspace. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09netfilter: nfnetlink_queue: reject verdict request from different portidLiping Zhang
Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict request when the portid is not same with the initial portid(maybe from another process). Fixes: 97d32cf9440d ("netfilter: nfnetlink_queue: batch verdict support") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09netfilter: nfnetlink_queue: fix memory leak when attach expectation successfullyLiping Zhang
User can use NFQA_EXP to attach expectations to conntracks, but we forget to put back nf_conntrack_expect when it is inserted successfully, i.e. in this normal case, expect's use refcnt will be 3. So even we unlink it and put it back later, the use refcnt is still 1, then the memory will be leaked forever. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09netfilter: nf_ct_expect: remove the redundant slash when policy name is emptyLiping Zhang
The 'name' filed in struct nf_conntrack_expect_policy{} is not a pointer, so check it is NULL or not will always return true. Even if the name is empty, slash will always be displayed like follows: # cat /proc/net/nf_conntrack_expect 297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/ ^ Fixes: 3a8fc53a45c4 ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-08-09batman-adv: Indicate netlink socket can be used with netns.Andrew Lunn
Set the netnsof flag on the family structure, indicating it can be used with different network name spaces. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: add backbone table netlink supportSimon Wunderlich
Dump the list of bridge loop avoidance backbones via the netlink socket. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: Provide bla group in the mesh_info netlink msgSven Eckelmann
The bridge loop avoidange is the main information for the debugging of of bridge loop detection problems. It is therefore necessary when comparing the bla claim tables. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: add B.A.T.M.A.N. Dump BLA claims via netlinkAndrew Lunn
Dump the list of bridge loop avoidance claims via the netlink socket. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: add policy for attributes, fix includes, fix soft_iface reference leak] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> [sw@simonwunderlich.de: fix kerneldoc, fix error reporting] Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementationsSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementationsAndrew Lunn
Dump the list of gateways via the netlink socket. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: integrate in batadv_algo_ops] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: netlink: add gateway table queriesSven Eckelmann
Add BATADV_CMD_GET_GATEWAYS commands, using handlers bat_gw_dump in batadv_algo_ops. Will always return -EOPNOTSUPP for now, as no implementations exist yet. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: add B.A.T.M.A.N. V bat_{orig, neigh}_dump implementationsMatthias Schiffer
Dump the algo V originators and neighbours. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: Fix includes, fix algo_ops integration] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: add B.A.T.M.A.N. IV bat_{orig, neigh}_dump implementationsMatthias Schiffer
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven.eckelmann@open-mesh.com: Fix function parameter alignments, add policy for attributes, fix includes, fix algo_ops integration] Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: netlink: add originator and neighbor table queriesMatthias Schiffer
Add BATADV_CMD_GET_ORIGINATORS and BATADV_CMD_GET_NEIGHBORS commands, using handlers bat_orig_dump and bat_neigh_dump in batadv_algo_ops. Will always return -EOPNOTSUPP for now, as no implementations exist yet. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> [sven@narfation.org: Rewrite based on new algo_ops structures] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-08-09batman-adv: Provide TTVN in the mesh_info netlink msgSven Eckelmann
The TTVN is the main information for the debugging of translation table problems. It is therefore necessary when comparing the global translation tables. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
generated by cgit (git 2.34.1) at 2025-09-12 07:43:27 +0000