summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-09-18mac80211: fix 80 MHz association to 160/80+80 AP on 6 GHzJohn Crispin
When trying to associate to an AP support 180 or 80+80 MHz on 6 GHz with a STA that only has 80 Mhz support the cf2 field inside the chandef will get set causing the association to fail when trying to validate the chandef. Fix this by checking the support flags prior to setting cf2. Fixes: 57fa5e85d53ce ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200918115304.1135693-1-john@phrozen.org [reword commit message a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: allow bigger A-MSDU sizes in VHT, even if HT is limitedFelix Fietkau
Some APs (e.g. Asus RT-AC88U) have been observed to report an HT MSDU size limit of 3839 and a VHT limit of 7991. These APs can handle bigger frames than 3839 bytes just fine, so we should remove the VHT limit based on the HT capabilities. This improves tx throughput. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200916164611.8022-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: support setting S1G channelsThomas Pedersen
S1G channels have a single width defined per frequency, so derive it from the channel flags with ieee80211_s1g_channel_width(). Also support setting an S1G channel where control frequency may differ from operating, and add some basic validation to ensure the control channel is with the operating. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: correctly validate S1G beacon headThomas Pedersen
The S1G beacon has a different header size than regular beacons, so adjust the beacon head validator. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-5-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: regulatory: handle S1G channelsThomas Pedersen
S1G channels have a minimum bandwidth of 1Mhz, and there is a 1:1 mapping of allowed bandwidth to channel number. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18nl80211: advertise supported channel width in S1GThomas Pedersen
S1G supports 5 channel widths: 1, 2, 4, 8, and 16. One channel width is allowed per frequency in each operating class, so it makes more sense to advertise the specific channel width allowed. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reorganize code to remove a forward declarationFelix Fietkau
Remove the newly added ieee80211_set_vif_encap_ops declaration. No further code changes. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-15-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend ieee80211_tx_status_ext to support bulk freeFelix Fietkau
Store processed skbs ready to be freed in a list so the driver bulk free them Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-13-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: support using ieee80211_tx_status_ext to free skbs without status infoFelix Fietkau
For encap-offloaded packets, ieee80211_free_txskb cannot be used, since it does not have the vif pointer. Using ieee80211_tx_status_ext for this purpose has the advantage of being able avoid an extra station lookup for AQL Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-12-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: unify 802.3 (offload) and 802.11 tx status codepathFelix Fietkau
Make ieee80211_tx_status_8023 call ieee80211_tx_status_ext, similar to ieee80211_tx_status. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-11-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: optimize station connection monitorFelix Fietkau
Calling mod_timer for every rx/tx packet can be quite expensive. Instead of constantly updating the timer, we can simply let it run out and check the timestamp of the last ACK or rx packet to re-arm it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-9-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: notify the driver when a sta uses 4-address modeFelix Fietkau
This is needed for encapsulation offload of 4-address mode packets Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-14-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: swap NEED_TXPROCESSING and HW_80211_ENCAP tx flagsFelix Fietkau
In order to unify the tx status path, the hw 802.11 encapsulation flag needs to survive the trip to the tx status call. Since we don't have any free bits in info->flags, we need to move one. IEEE80211_TX_INTFL_NEED_TXPROCESSING is only used internally in mac80211, and only before the call into the driver. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-10-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: remove tx status call to ieee80211_sta_register_airtimeFelix Fietkau
All drivers using airtime fairness are calling ieee80211_sta_register_airtime directly, now they must. Document this as well. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-8-nbd@nbd.name [johannes: update the documentation to suit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: reduce duplication in tx status functionsFelix Fietkau
Move redundant functionality from __ieee80211_tx_status into ieee80211_tx_status_ext. Preparation for unifying with the 802.3 tx status codepath. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: rework tx encapsulation offload APIFelix Fietkau
The current API (which lets the driver turn on/off per vif directly) has a number of limitations: - it does not deal with AP_VLAN - conditions for enabling (no tkip, no monitor) are only checked at add_interface time - no way to indicate 4-addr support In order to address this, store offload flags in struct ieee80211_vif (easy to extend for decap offload later). mac80211 initially sets the enable flag, but gives the driver a chance to modify it before its settings are applied. In addition to the .add_interface op, a .update_vif_offload op is introduced, which can be used for runtime changes. If a driver can't disable encap offload at runtime, or if it has some extra limitations, it can simply override the flags within those ops. Support for encap offload with 4-address mode interfaces can be enabled by setting a flag from .add_interface or .update_vif_offload. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-6-nbd@nbd.name [resolved conflict with commit aa2092a9bab3 ("ath11k: add raw mode and software crypto support")] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: set info->control.hw_key for encap offload packetsFelix Fietkau
This is needed for drivers that don't do the key lookup themselves Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: skip encap offload for tx multicast/control packetsFelix Fietkau
This simplifies the checks in the encap offload tx handler and allows using it in cases where software crypto is used for multicast packets, e.g. when using an AP_VLAN. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-4-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: check and refresh aggregation session in encap offload txFelix Fietkau
Update the last_tx timestamp to avoid tearing down the aggregation session early. Fall back to the slow path if the session setup is still running Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add missing queue/hash initialization to 802.3 xmitFelix Fietkau
Fixes AQL for encap-offloaded tx Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200908123702.88454-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18lib80211: Remove unused macro DRV_NAMEYueHaibing
There is no caller in tree any more. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200829115506.17828-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not allow bigger VHT MPDUs than the hardware supportsFelix Fietkau
Limit maximum VHT MPDU size by local capability. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200917125031.45009-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18cfg80211: fix 6 GHz channel conversionJohannes Berg
We shouldn't accept any channels bigger than 233, fix that. Reported-by: Amar <asinghal@codeaurora.org> Fixes: d1a1646c0de7 ("cfg80211: adapt to new channelization of the 6GHz band") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200917115222.312ba6f1d461.I3a8c8fbcc3cc019814fd9cd0aced7eb591626136@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: do not disable HE if HT is missing on 2.4 GHzWen Gong
VHT is not supported on 2.4 GHz, but HE is; don't disable HE if HT is missing there, do that only on 5 GHz (6 GHz is only HE). Fixes: 57fa5e85d53ce51 ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by: Wen Gong <wgong@codeaurora.org> Link: https://lore.kernel.org/r/010101747cb617f2-593c5410-1648-4a42-97a0-f3646a5a6dd1-000000@us-west-2.amazonses.com [rewrite the commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: Fix radiotap header channel flag for 6GHz bandAloka Dixit
Radiotap header field 'Channel flags' has '2 GHz spectrum' set to 'true' for 6GHz packet. Change it to 5GHz as there isn't a separate option available for 6GHz. Signed-off-by: Aloka Dixit <alokad@codeaurora.org> Link: https://lore.kernel.org/r/010101747ab7b703-1d7c9851-1594-43bf-81f7-f79ce7a67cc6-000000@us-west-2.amazonses.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18lib80211: fix unmet direct dependendices config warning when !CRYPTONecip Fazil Yildiran
When LIB80211_CRYPT_CCMP is enabled and CRYPTO is disabled, it results in unmet direct dependencies config warning. The reason is that LIB80211_CRYPT_CCMP selects CRYPTO_AES and CRYPTO_CCM, which are subordinate to CRYPTO. This is reproducible with CRYPTO disabled and R8188EU enabled, where R8188EU selects LIB80211_CRYPT_CCMP but does not select or depend on CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: a11e2f85481c ("lib80211: use crypto API ccm(aes) transform for CCMP processing") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Link: https://lore.kernel.org/r/20200909095452.3080-1-fazilyildiran@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add AQL support for VHT160 tx ratesFelix Fietkau
When converting from struct ieee80211_tx_rate to ieee80211_rx_status, there was one check missing to fill in the bandwidth for 160 MHz Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend AQL aggregation estimation to HE and fix unit mismatchFelix Fietkau
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not microseconds. Adjust the duration checks to account for that. For higher data rates, allow larger estimated aggregation sizes, and add some values for HE as well, which can use much larger aggregates. Since small packets with high data rates can now lead to duration values too small for info->tx_time_est, return a minimum of 4us. Fixes: f01cfbaf9b29 ("mac80211: improve AQL aggregation estimation for low data rates") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-17mptcp: fix integer overflow in mptcp_subflow_discard_data()Paolo Abeni
Christoph reported an infinite loop in the subflow receive path under stress condition. If there are multiple subflows, each of them using a large send buffer, the delta between the sequence number used by MPTCP-level retransmission can and the current msk->ack_seq can be greater than MAX_INT. In the above scenario, when calling mptcp_subflow_discard_data(), such delta will be truncated to int, and could result in a negative number: no bytes will be dropped, and subflow_check_data_avail() will try again to process the same packet, looping forever. This change addresses the issue by expanding the 'limit' size to 64 bits, so that overflows are not possible anymore. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/87 Fixes: 6719331c2f73 ("mptcp: trigger msk processing even for OoO data") Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net/smc: fix double kfree in smc_listen_work()Ursula Braun
If smc_listen_rmda_finish() returns with an error, the storage addressed by 'buf' is freed a second time. Consolidate freeing under a common label and jump to that label. Fixes: 6bb14e48ee8d ("net/smc: dynamic allocation of CLC proposal buffer") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: hsr: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17netlink: add spaces around '&' in netlink_recv/sendmsg()Yang Yingliang
It's hard to read the code without spaces around '&', for better reading, add spaces around '&'. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17mptcp: Fix unsigned 'max_seq' compared with zero in mptcp_data_queue_ofoYe Bin
Fixes coccicheck warnig: net/mptcp/protocol.c:164:11-18: WARNING: Unsigned expression compared with zero: max_seq > 0 Fixes: ab174ad8ef76 ("mptcp: move ooo skbs into msk out of order queue") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17ethtool: add and use message type for tunnel info replyMichal Kubecek
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd field in genetlink header) for replies to tunnel info netlink request, i.e. the same value as the request have. This is a problem because we are using two separate enums for userspace to kernel and kernel to userspace message types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for kernel to userspace messages. As the tunnel info request reached mainline in 5.9 merge window, we should still be able to fix the reply message type without breaking backward compatibility. Fixes: c7d759eb7b12 ("ethtool: add tunnel info interface") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net/packet: Fix a comment about mac_headerXie He
1. Change all "dev->hard_header" to "dev->header_ops" 2. On receiving incoming frames when header_ops == NULL: The comment only says what is wrong, but doesn't say what is right. This patch changes the comment to make it clear what is right. 3. On transmitting and receiving outgoing frames when header_ops == NULL: The comment explains that the LL header will be later added by the driver. However, I think it's better to simply say that the LL header is invisible to us. This phrasing is better from a software engineering perspective, because this makes it clear that what happens in the driver should be hidden from us and we should not care about what happens internally in the driver. 4. On resuming the LL header (for RAW frames) when header_ops == NULL: The comment says we are "unlikely" to restore the LL header. However, we should say that we are "unable" to restore it. It's not possible (rather than not likely) to restore it, because: 1) There is no way for us to restore because the LL header internally processed by the driver should be invisible to us. 2) In function packet_rcv and tpacket_rcv, the code only tries to restore the LL header when header_ops != NULL. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16net/smc: check variable before dereferencing in smc_close.cKarsten Graul
smc->clcsock and smc->clcsock->sk are used before the check if they can be dereferenced. Fix this by checking the variables first. Fixes: a60a2b1e0af1 ("net/smc: reduce active tcp_listen workers") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16net: bridge: mcast: don't ignore return value of __grp_src_toex_exclNikolay Aleksandrov
When we're handling TO_EXCLUDE report in EXCLUDE filter mode we should not ignore the return value of __grp_src_toex_excl() as we'll miss sending notifications about group changes. Fixes: 5bf1e00b6849 ("net: bridge: mcast: support for IGMPV3/MLDv2 CHANGE_TO_INCLUDE/EXCLUDE report") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-16xsk: Do not discard packet when NETDEV_TX_BUSYMagnus Karlsson
In the skb Tx path, transmission of a packet is performed with dev_direct_xmit(). When NETDEV_TX_BUSY is set in the drivers, it signifies that it was not possible to send the packet right now, please try later. Unfortunately, the xsk transmit code discarded the packet and returned EBUSY to the application. Fix this unnecessary packet loss, by not discarding the packet in the Tx ring and return EAGAIN. As EAGAIN is returned to the application, it can then retry the send operation later and the packet will then likely be sent as the driver will then likely have space/resources to send the packet. In summary, EAGAIN tells the application that the packet was not discarded from the Tx ring and that it needs to call send() again. EBUSY, on the other hand, signifies that the packet was not sent and discarded from the Tx ring. The application needs to put the packet on the Tx ring again if it wants it to be sent. Fixes: 35fcde7f8deb ("xsk: support for Tx") Reported-by: Arkadiusz Zema <A.Zema@falconvsystems.com> Suggested-by: Arkadiusz Zema <A.Zema@falconvsystems.com> Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/bpf/1600257625-2353-1-git-send-email-magnus.karlsson@gmail.com
2020-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-09-15 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 19 day(s) which contain a total of 10 files changed, 47 insertions(+), 38 deletions(-). The main changes are: 1) docs/bpf fixes, from Andrii. 2) ld_abs fix, from Daniel. 3) socket casting helpers fix, from Martin. 4) hash iterator fixes, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15bpf: Mutex protect used_maps array and countYiFei Zhu
To support modifying the used_maps array, we use a mutex to protect the use of the counter and the array. The mutex is initialized right after the prog aux is allocated, and destroyed right before prog aux is freed. This way we guarantee it's initialized for both cBPF and eBPF. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Cc: YiFei Zhu <zhuyifei1999@gmail.com> Link: https://lore.kernel.org/bpf/20200915234543.3220146-2-sdf@google.com
2020-09-15bpf: Bpf_skc_to_* casting helpers require a NULL check on skMartin KaFai Lau
The bpf_skc_to_* type casting helpers are available to BPF_PROG_TYPE_TRACING. The traced PTR_TO_BTF_ID may be NULL. For example, the skb->sk may be NULL. Thus, these casting helpers need to check "!sk" also and this patch fixes them. Fixes: 0d4fad3e57df ("bpf: Add bpf_skc_to_udp6_sock() helper") Fixes: 478cfbdf5f13 ("bpf: Add bpf_skc_to_{tcp, tcp_timewait, tcp_request}_sock() helpers") Fixes: af7ec1383361 ("bpf: Add bpf_skc_to_tcp6_sock() helper") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200915182959.241101-1-kafai@fb.com
2020-09-15nexthop: Only emit a notification when nexthop is actually deletedIdo Schimmel
Currently, the in-kernel delete notification is emitted from the error path of nexthop_add() and replace_nexthop(), which can be confusing to in-kernel listeners as they are not familiar with the nexthop. Instead, only emit the notification when the nexthop is actually deleted. The following sub-cases are covered: 1. User space deletes the nexthop 2. The nexthop is deleted by the kernel due to a netdev event (e.g., nexthop device going down) 3. A group is deleted because its last nexthop is being deleted 4. The network namespace of the nexthop device is deleted Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15nexthop: Convert to blocking notification chainIdo Schimmel
Currently, the only listener of the nexthop notification chain is the VXLAN driver. Subsequent patches will add more listeners (e.g., device drivers such as netdevsim) that need to be able to block when processing notifications. Therefore, convert the notification chain to a blocking one. This is safe as notifications are always emitted from process context. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15devlink: introduce the health reporter test commandJiri Pirko
Introduce a test command for health reporters. User might use this command to trigger test event on a reporter if the reporter supports it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15ipv4: Update exception handling for multipath routes via same deviceDavid Ahern
Kfir reported that pmtu exceptions are not created properly for deployments where multipath routes use the same device. After some digging I see 2 compounding problems: 1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after* the route lookup. This is the second use case where this has been a problem (the first is related to use of vti devices with VRF). I can not find any reason for the oif to be changed after the lookup; the code goes back to the start of git. It does not seem logical so remove it. 2. fib_lookups for exceptions do not call fib_select_path to handle multipath route selection based on the hash. The end result is that the fib_lookup used to add the exception always creates it based using the first leg of the route. An example topology showing the problem: | host1 +------+ | eth0 | .209 +------+ | +------+ switch | br0 | +------+ | +---------+---------+ | host2 | host3 +------+ +------+ | eth0 | .250 | eth0 | 192.168.252.252 +------+ +------+ +-----+ +-----+ | vti | .2 | vti | 192.168.247.3 +-----+ +-----+ \ / ================================= tunnels 192.168.247.1/24 for h in host1 host2 host3; do ip netns add ${h} ip -netns ${h} link set lo up ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1 done ip netns add switch ip -netns switch li set lo up ip -netns switch link add br0 type bridge stp 0 ip -netns switch link set br0 up for n in 1 2 3; do ip -netns switch link add eth-sw type veth peer name eth-h${n} ip -netns switch li set eth-h${n} master br0 up ip -netns switch li set eth-sw netns host${n} name eth0 done ip -netns host1 addr add 192.168.252.209/24 dev eth0 ip -netns host1 link set dev eth0 up ip -netns host1 route add 192.168.247.0/24 \ nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0 ip -netns host2 addr add 192.168.252.250/24 dev eth0 ip -netns host2 link set dev eth0 up ip -netns host2 addr add 192.168.252.252/24 dev eth0 ip -netns host3 link set dev eth0 up ip netns add tunnel ip -netns tunnel li set lo up ip -netns tunnel li add br0 type bridge ip -netns tunnel li set br0 up for n in $(seq 11 20); do ip -netns tunnel addr add dev br0 192.168.247.${n}/24 done for n in 2 3 do ip -netns tunnel link add vti${n} type veth peer name eth${n} ip -netns tunnel link set eth${n} mtu 1360 master br0 up ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24 done ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11 ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15 ip -netns host1 ro ls cache Before this patch the cache always shows exceptions against the first leg in the multipath route; 192.168.252.250 per this example. Since the hash has an initial random seed, you may need to vary the final octet more than what is listed. In my tests, using addresses between 11 and 19 usually found 1 that used both legs. With this patch, the cache will have exceptions for both legs. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions") Reported-by: Kfir Itzhak <mastertheknife@gmail.com> Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15net: tipc: kerneldoc fixesLu Wei
Fix parameter description of tipc_link_bc_create() Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control") Signed-off-by: Lu Wei <luwei32@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15ethtool: add standard pause statsJakub Kicinski
Currently drivers have to report their pause frames statistics via ethtool -S, and there is a wide variety of names used for these statistics. Add the two statistics defined in IEEE 802.3x to the standard API. Create a new ethtool request header flag for including statistics in the response to GET commands. Always create the ETHTOOL_A_PAUSE_STATS nest in replies when flag is set. Testing if driver declares the op is not a reliable way of checking if any stats will actually be included and therefore we don't want to give the impression that presence of ETHTOOL_A_PAUSE_STATS indicates driver support. Note that this patch does not include PFC counters, which may fit better in dcbnl? But mostly I don't need them/have a setup to test them so I haven't looked deeply into exposing them :) v3: - add a helper for "uninitializing" stats, rather than a cryptic memset() (Andrew) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15bridge: Add SWITCHDEV_FDB_FLUSH_TO_BRIDGE notifierAlexandra Winter
so the switchdev can notifiy the bridge to flush non-permanent fdb entries for this port. This is useful whenever the hardware fdb of the switchdev is reset, but the netdev and the bridgeport are not deleted. Note that this has the same effect as the IFLA_BRPORT_FLUSH attribute. CC: Jiri Pirko <jiri@resnulli.us> CC: Ivan Vecera <ivecera@redhat.com> CC: Roopa Prabhu <roopa@nvidia.com> CC: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15batman-adv: mcast: fix duplicate mcast packets from BLA backbone to meshLinus Lüssing
Scenario: * Multicast frame send from BLA backbone gateways (multiple nodes with their bat0 bridged together, with BLA enabled) sharing the same LAN to nodes in the mesh Issue: * Nodes receive the frame multiple times on bat0 from the mesh, once from each foreign BLA backbone gateway which shares the same LAN with another For multicast frames via batman-adv broadcast packets coming from the same BLA backbone but from different backbone gateways duplicates are currently detected via a CRC history of previously received packets. However this CRC so far was not performed for multicast frames received via batman-adv unicast packets. Fixing this by appyling the same check for such packets, too. Room for improvements in the future: Ideally we would introduce the possibility to not only claim a client, but a complete originator, too. This would allow us to only send a multicast-in-unicast packet from a BLA backbone gateway claiming the node and by that avoid potential redundant transmissions in the first place. Fixes: 279e89b2281a ("batman-adv: add broadcast duplicate check") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-09-15batman-adv: mcast: fix duplicate mcast packets in BLA backbone from meshLinus Lüssing
Scenario: * Multicast frame send from mesh to a BLA backbone (multiple nodes with their bat0 bridged together, with BLA enabled) Issue: * BLA backbone nodes receive the frame multiple times on bat0, once from mesh->bat0 and once from each backbone_gw from LAN For unicast, a node will send only to the best backbone gateway according to the TQ. However for multicast we currently cannot determine if multiple destination nodes share the same backbone if they don't share the same backbone with us. So we need to keep sending the unicasts to all backbone gateways and let the backbone gateways decide which one will forward the frame. We can use the CLAIM mechanism to make this decision. One catch: The batman-adv gateway feature for DHCP packets potentially sends multicast packets in the same batman-adv unicast header as the multicast optimizations code. And we are not allowed to drop those even if we did not claim the source address of the sender, as for such packets there is only this one multicast-in-unicast packet. How can we distinguish the two cases? The gateway feature uses a batman-adv unicast 4 address header. While the multicast-to-unicasts feature uses a simple, 3 address batman-adv unicast header. So let's use this to distinguish. Fixes: fe2da6ff27c7 ("batman-adv: check incoming packet type for bla") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
generated by cgit (git 2.34.1) at 2025-09-10 23:11:11 +0000