| Age | Commit message (Collapse) | Author |
|---|
|
If the data in xdp_buff exceeds the xsk frame length, the packet needs
to be dropped. This check is currently being done in __xsk_rcv(). Move
the described logic to xsk_rcv_check() so that such a xdp_buff will
only be dropped if the application does not support multi-buffer
(absence of XDP_USE_SG bind flag). This is applicable for all cases:
copy mode, zero copy mode as well as skb mode.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-5-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, __xsk_rcv_zc() is a function that is responsible for
producing AF_XDP Rx descriptors. It is used by both copy and zero-copy
mode. Both of these modes are going to differ when multi-buffer support
is going to be added. ZC will work on a chain of xdp_buff_xsk structs
whereas copy-mode is going to utilize skb_shared_info contents. This
means that ZC-specific changes would affect the copy mode.
Let's modify __xsk_rcv_zc() to work directly on xdp_buff_xsk so the
callsites have to retrieve this from xdp_buff. Also, introduce
xsk_rcv_zc() which will carry all the needed later changes for
supporting multi-buffer on ZC side that do not apply to copy mode.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-4-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As of now xsk core drops any xdp_buff with data size greater than the
xsk frame_size as set by the af_xdp application. With multi-buffer
support introduced in the next patch xsk core can now split those
buffers into multiple descriptors provided the af_xdp application can
handle them. Such capability of the application needs to be independent
of the xdp_prog's frag support capability since there are cases where
even a single xdp_buffer may need to be split into multiple descriptors
owing to a smaller xsk frame size.
For e.g., with NIC rx_buffer size set to 4kB, a 3kB packet will
constitute of a single buffer and so will be sent as such to AF_XDP layer
irrespective of 'xdp.frags' capability of the XDP program. Now if the xsk
frame size is set to 2kB by the AF_XDP application, then the packet will
need to be split into 2 descriptors if AF_XDP application can handle
multi-buffer, else it needs to be dropped.
Applications can now advertise their frag handling capability to xsk core
so that xsk core can decide if it should drop or split xdp_buffs that
exceed xsk frame size. This is done using a new 'XSK_USE_SG' bind flag
for the xdp socket.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the 'options' field in xdp_desc as a packet continuity marker. Since
'options' field was unused till now and was expected to be set to 0, the
'eop' descriptor will have it set to 0, while the non-eop descriptors
will have to set it to 1. This ensures legacy applications continue to
work without needing any change for single-buffer packets.
Add helper functions and extend xskq_prod_reserve_desc() to use the
'options' field.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-2-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There's no reason for setting the RTO_ONLINK flag in ->flowi4_tos as
RT_CONN_FLAGS() does. We can easily set ->flowi4_scope properly
instead. This makes the code more explicit and will allow to convert
->flowi4_tos to dscp_t in the future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no reason for setting the RTO_ONLINK flag in ->flowi4_tos as
RT_CONN_FLAGS() does. We can easily set ->flowi4_scope properly
instead. This makes the code more explicit and will allow to convert
->flowi4_tos to dscp_t in the future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
goto free_skb if an unexpected result is returned by pskb_tirm()
in erspan_xmit().
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
goto err_free_skb if an unexpected result is returned by pskb_tirm()
in erspan_fb_xmit().
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
goto tx_err if an unexpected result is returned by pskb_tirm()
in ip6erspan_tunnel_xmit().
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
key might contain private part of the key, so better use
kfree_sensitive to free it.
Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new bridge port attribute that allows attaching a nexthop object
ID to an skb that is redirected to a backup bridge port with VLAN
tunneling enabled.
Specifically, when redirecting a known unicast packet, read the backup
nexthop ID from the bridge port that lost its carrier and set it in the
bridge control block of the skb before forwarding it via the backup
port. Note that reading the ID from the bridge port should not result in
a cache miss as the ID is added next to the 'backup_port' field that was
already accessed. After this change, the 'state' field still stays on
the first cache line, together with other data path related fields such
as 'flags and 'vlgrp':
struct net_bridge_port {
struct net_bridge * br; /* 0 8 */
struct net_device * dev; /* 8 8 */
netdevice_tracker dev_tracker; /* 16 0 */
struct list_head list; /* 16 16 */
long unsigned int flags; /* 32 8 */
struct net_bridge_vlan_group * vlgrp; /* 40 8 */
struct net_bridge_port * backup_port; /* 48 8 */
u32 backup_nhid; /* 56 4 */
u8 priority; /* 60 1 */
u8 state; /* 61 1 */
u16 port_no; /* 62 2 */
/* --- cacheline 1 boundary (64 bytes) --- */
[...]
} __attribute__((__aligned__(8)));
When forwarding an skb via a bridge port that has VLAN tunneling
enabled, check if the backup nexthop ID stored in the bridge control
block is valid (i.e., not zero). If so, instead of attaching the
pre-allocated metadata (that only has the tunnel key set), allocate a
new metadata, set both the tunnel key and the nexthop object ID and
attach it to the skb.
By default, do not dump the new attribute to user space as a value of
zero is an invalid nexthop object ID.
The above is useful for EVPN multihoming. When one of the links
composing an Ethernet Segment (ES) fails, traffic needs to be redirected
towards the host via one of the other ES peers. For example, if a host
is multihomed to three different VTEPs, the backup port of each ES link
needs to be set to the VXLAN device and the backup nexthop ID needs to
point to an FDB nexthop group that includes the IP addresses of the
other two VTEPs. The VXLAN driver will extract the ID from the metadata
of the redirected skb, calculate its flow hash and forward it towards
one of the other VTEPs. If the ID does not exist, or represents an
invalid nexthop object, the VXLAN driver will drop the skb. This
relieves the bridge driver from the need to validate the ID.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP request sockets are lockless, tcp_rsk(req)->ts_recent
can change while being read by another cpu as syzbot noticed.
This is harmless, but we should annotate the known races.
Note that tcp_check_req() changes req->ts_recent a bit early,
we might change this in the future.
BUG: KCSAN: data-race in tcp_check_req / tcp_check_req
write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1:
tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
do_softirq+0x7e/0xb0 kernel/softirq.c:472
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396
local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33
rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline]
__dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_hh_output include/net/neighbour.h:528 [inline]
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
__ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533
ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547
__tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693
__tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877
tcp_push_pending_frames include/net/tcp.h:1952 [inline]
__tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline]
tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343
rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52
rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422
rds_send_worker+0x42/0x1d0 net/rds/threads.c:200
process_one_work+0x3e6/0x750 kernel/workqueue.c:2408
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0:
tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x1cd237f1 -> 0x1cd237f2
Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP request sockets are lockless, some of their fields
can change while being read by another cpu as syzbot noticed.
This is usually harmless, but we should annotate the known
races.
This patch takes care of tcp_rsk(req)->txhash,
a separate one is needed for tcp_rsk(req)->ts_recent.
BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack
write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1:
tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213
inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880
tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665
tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0:
tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663
tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544
tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059
tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175
tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494
tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509
tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x91d25731 -> 0xe79325cd
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With modern NIC drivers shifting to full page allocations per
received frame, we face the following issue:
TCP has one per-netns sysctl used to tweak how to translate
a memory use into an expected payload (RWIN), in RX path.
tcp_win_from_space() implementation is limited to few cases.
For hosts dealing with various MSS, we either under estimate
or over estimate the RWIN we send to the remote peers.
For instance with the default sysctl_tcp_adv_win_scale value,
we expect to store 50% of payload per allocated chunk of memory.
For the typical use of MTU=1500 traffic, and order-0 pages allocations
by NIC drivers, we are sending too big RWIN, leading to potential
tcp collapse operations, which are extremely expensive and source
of latency spikes.
This patch makes sysctl_tcp_adv_win_scale obsolete, and instead
uses a per socket scaling factor, so that we can precisely
adjust the RWIN based on effective skb->len/skb->truesize ratio.
This patch alone can double TCP receive performance when receivers
are too slow to drain their receive queue, or by allowing
a bigger RWIN when MSS is close to PAGE_SIZE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20230717152917.751987-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-07-17
The 1st patch is by Ziyang Xuan and fixes a possible memory leak in
the receiver handling in the CAN RAW protocol.
YueHaibing contributes a use after free in bcm_proc_show() of the
Broad Cast Manager (BCM) CAN protocol.
The next 2 patches are by me and fix a possible null pointer
dereference in the RX path of the gs_usb driver with activated
hardware timestamps and the candlelight firmware.
The last patch is by Fedor Ross, Marek Vasut and me and targets the
mcp251xfd driver. The polling timeout of __mcp251xfd_chip_set_mode()
is increased to fix bus joining on busy CAN buses and very low bit
rate.
* tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout
can: gs_usb: fix time stamp counter initialization
can: gs_usb: gs_can_open(): improve error handling
can: bcm: Fix UAF in bcm_proc_show()
can: raw: fix receiver memory leak
====================
Link: https://lore.kernel.org/r/20230717180938.230816-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code using btf_vmlinux in bpf_tcp_ca is removed by the
commit 9f0265e921de ("bpf: Require only one of cong_avoid() and cong_control() from a TCP CC")
so drop this useless btf_vmlinux declaration.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/4d38da4eadaba476bd92ffcd7a5a03a5e28745c0.1689582557.git.geliang.tang@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make rtnl_fill_vf() cancel the vfinfo attribute on error instead of the
inner rtnl_fill_vfinfo(), as it is the function that starts it.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20230716072440.2372567-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All drivers are now updated for the March 2020 changes, and no longer
make use of the mac_pcs_get_state() or mac_an_restart() operations,
which are now NULL across all DSA drivers. All DSA drivers don't look
at speed, duplex, pause or advertisement in their phylink_mac_config()
method either.
Remove support for these operations from DSA, and stop marking DSA as
a legacy driver by default.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The destination port value in the IPCR control buffer on older
targets is 0xFFFF. Handle the same by updating the dst_port to
QRTR_PORT_CTRL.
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a use after free scenario while iterating through the nodes
radix tree despite the ns being a single threaded process. This can
happen when the radix tree APIs are not synchronized with the
rcu_read_lock() APIs.
Convert the radix tree for nodes to xarray to take advantage of the
built in rcu lock usage provided by xarray.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a use after free scenario while iterating through the servers
radix tree despite the ns being a single threaded process. This can
happen when the radix tree APIs are not synchronized with the
rcu_read_lock() APIs.
Convert the radix tree for servers to xarray to take advantage of the
built in rcu lock usage provided by xarray.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80
Read of size 8 at addr ffff888155846230 by task cat/7862
CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xd5/0x150
print_report+0xc1/0x5e0
kasan_report+0xba/0xf0
bcm_proc_show+0x969/0xa80
seq_read_iter+0x4f6/0x1260
seq_read+0x165/0x210
proc_reg_read+0x227/0x300
vfs_read+0x1d5/0x8d0
ksys_read+0x11e/0x240
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 7846:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x9e/0xa0
bcm_sendmsg+0x264b/0x44e0
sock_sendmsg+0xda/0x180
____sys_sendmsg+0x735/0x920
___sys_sendmsg+0x11d/0x1b0
__sys_sendmsg+0xfa/0x1d0
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 7846:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x27/0x40
____kasan_slab_free+0x161/0x1c0
slab_free_freelist_hook+0x119/0x220
__kmem_cache_free+0xb4/0x2e0
rcu_core+0x809/0x1bd0
bcm_op is freed before procfs entry be removed in bcm_release(),
this lead to bcm_proc_show() may read the freed bcm_op.
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230715092543.15548-1-yuehaibing@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Got kmemleak errors with the following ltp can_filter testcase:
for ((i=1; i<=100; i++))
do
./can_filter &
sleep 0.1
done
==============================================================
[<00000000db4a4943>] can_rx_register+0x147/0x360 [can]
[<00000000a289549d>] raw_setsockopt+0x5ef/0x853 [can_raw]
[<000000006d3d9ebd>] __sys_setsockopt+0x173/0x2c0
[<00000000407dbfec>] __x64_sys_setsockopt+0x61/0x70
[<00000000fd468496>] do_syscall_64+0x33/0x40
[<00000000b7e47d51>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It's a bug in the concurrent scenario of unregister_netdevice_many()
and raw_release() as following:
cpu0 cpu1
unregister_netdevice_many(can_dev)
unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this
net_set_todo(can_dev)
raw_release(can_socket)
dev = dev_get_by_index(, ro->ifindex); // dev == NULL
if (dev) { // receivers in dev_rcv_lists not free because dev is NULL
raw_disable_allfilters(, dev, );
dev_put(dev);
}
...
ro->bound = 0;
...
call_netdevice_notifiers(NETDEV_UNREGISTER, )
raw_notify(, NETDEV_UNREGISTER, )
if (ro->bound) // invalid because ro->bound has been set 0
raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed
Add a net_device pointer member in struct raw_sock to record bound
can_dev, and use rtnl_lock to serialize raw_socket members between
raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use
ro->dev to decide whether to free receivers in dev_rcv_lists.
Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier")
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If TCA_FLOWER_CLASSID is specified in the netlink message, the code will
call tcf_bind_filter. However, if any error occurs after that, the code
should undo this by calling tcf_unbind_filter.
Fixes: 77b9900ef53a ("tc: introduce Flower classifier")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489fd2 ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.
Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.
Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mall_set_parms
In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.
Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.
Fixes: ec2507d2a306 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull ceph fix from Ilya Dryomov:
"A fix to prevent a potential buffer overrun in the messenger, marked
for stable"
* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
libceph: harden msgr2.1 frame segment length checks
|
|
Commit 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4
packets.") checks DODGY bit for UDP, but for packets that can be fed
directly to the device after gso_segs reset, it actually falls through
to fragmentation:
https://lore.kernel.org/all/CAJPywTKDdjtwkLVUW6LRA2FU912qcDmQOQGt2WaDo28KzYDg+A@mail.gmail.com/
This change restores the expected behavior of GSO_UDP_L4 packets.
Fixes: 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4 packets.")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The checks in question were introduced by:
commit 6b4db2e528f6 ("devlink: Fix use-after-free after a failed reload").
That fixed an issue of reload with mlxsw driver.
Back then, that was a valid fix, because there was a limitation
in place that prevented drivers from registering/unregistering params
when devlink instance was registered.
It was possible to do the fix differently by changing drivers to
register/unregister params in appropriate places making sure the ops
operate only on memory which is allocated and initialized. But that,
as a dependency, would require to remove the limitation mentioned above.
Eventually, this limitation was lifted by:
commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance")
Also, the alternative fix (which also fixed another issue) was done by:
commit 74cbc3c03c82 ("mlxsw: spectrum_acl_tcam: Move devlink param to TCAM code").
Therefore, the checks are no longer relevant. Each driver should make
sure to have the params registered only when the memory the ops
are working with is allocated and initialized.
So remove the checks.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
956553768 12861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing
1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
icmpv6_flow_init(), ip6_datagram_flow_key_init() and ip6_mc_hdr() don't
need to modify their sk argument. Make that explicit using const.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-13
We've added 67 non-merge commits during the last 15 day(s) which contain
a total of 106 files changed, 4444 insertions(+), 619 deletions(-).
The main changes are:
1) Fix bpftool build in presence of stale vmlinux.h,
from Alexander Lobakin.
2) Introduce bpf_me_mcache_free_rcu() and fix OOM under stress,
from Alexei Starovoitov.
3) Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling,
from Andrii Nakryiko.
4) Introduce bpf map element count, from Anton Protopopov.
5) Check skb ownership against full socket, from Kui-Feng Lee.
6) Support for up to 12 arguments in BPF trampoline, from Menglong Dong.
7) Export rcu_request_urgent_qs_task, from Paul E. McKenney.
8) Fix BTF walking of unions, from Yafang Shao.
9) Extend link_info for kprobe_multi and perf_event links,
from Yafang Shao.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (67 commits)
selftests/bpf: Add selftest for PTR_UNTRUSTED
bpf: Fix an error in verifying a field in a union
selftests/bpf: Add selftests for nested_trust
bpf: Fix an error around PTR_UNTRUSTED
selftests/bpf: add testcase for TRACING with 6+ arguments
bpf, x86: allow function arguments up to 12 for TRACING
bpf, x86: save/restore regs with BPF_DW size
bpftool: Use "fallthrough;" keyword instead of comments
bpf: Add object leak check.
bpf: Convert bpf_cpumask to bpf_mem_cache_free_rcu.
bpf: Introduce bpf_mem_free_rcu() similar to kfree_rcu().
selftests/bpf: Improve test coverage of bpf_mem_alloc.
rcu: Export rcu_request_urgent_qs_task()
bpf: Allow reuse from waiting_for_gp_ttrace list.
bpf: Add a hint to allocated objects.
bpf: Change bpf_mem_cache draining process.
bpf: Further refactor alloc_bulk().
bpf: Factor out inc/dec of active flag into helpers.
bpf: Refactor alloc_bulk().
bpf: Let free_all() return the number of freed elements.
...
====================
Link: https://lore.kernel.org/r/20230714020910.80794-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add fentry_many_args.c and fexit_many_args.c to test the fentry/fexit
with 7/11 arguments. As this feature is not supported by arm64 yet, we
disable these testcases for arm64 in DENYLIST.aarch64. We can combine
them with fentry_test.c/fexit_test.c when arm64 is supported too.
Correspondingly, add bpf_testmod_fentry_test7() and
bpf_testmod_fentry_test11() to bpf_testmod.c
Meanwhile, add bpf_modify_return_test2() to test_run.c to test the
MODIFY_RETURN with 7 arguments.
Add bpf_testmod_test_struct_arg_7/bpf_testmod_test_struct_arg_7 in
bpf_testmod.c to test the struct in the arguments.
And the testcases passed on x86_64:
./test_progs -t fexit
Summary: 5/14 PASSED, 0 SKIPPED, 0 FAILED
./test_progs -t fentry
Summary: 3/2 PASSED, 0 SKIPPED, 0 FAILED
./test_progs -t modify_return
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
./test_progs -t tracing_struct
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230713040738.1789742-4-imagedong@tencent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ceph_frame_desc::fd_lens is an int array. decode_preamble() thus
effectively casts u32 -> int but the checks for segment lengths are
written as if on unsigned values. While reading in HELLO or one of the
AUTH frames (before authentication is completed), arithmetic in
head_onwire_len() can get duped by negative ctrl_len and produce
head_len which is less than CEPH_PREAMBLE_LEN but still positive.
This would lead to a buffer overrun in prepare_read_control() as the
preamble gets copied to the newly allocated buffer of size head_len.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Thelford Williams <thelford@google.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
|
|
Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.
Consider the following code in net/sched/sch_qfq.c:
static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
unsigned int len = qdisc_pkt_len(skb), gso_segs;
// ...
if (unlikely(cl->agg->lmax < len)) {
pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
cl->agg->lmax, len, cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
if (err) {
cl->qstats.drops++;
return qdisc_drop(skb, sch, to_free);
}
// ...
}
Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.
This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.
A user may choose virtually any size using such a table.
As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------
We can create the issue with the following commands:
tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2
This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.
Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
25369891fcef deletes a check for the case where no 'lmax' is
specified which 3037933448f6 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fcef ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-12
We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 7 files changed, 93 insertions(+), 28 deletions(-).
The main changes are:
1) Fix max stack depth check for async callbacks, from Kumar.
2) Fix inconsistent JIT image generation, from Björn.
3) Use trusted arguments in XDP hints kfuncs, from Larysa.
4) Fix memory leak in cpu_map_update_elem, from Pu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: use trusted arguments in XDP hints kfuncs
bpf: cpumap: Fix memory leak in cpu_map_update_elem
riscv, bpf: Fix inconsistent JIT image generation
selftests/bpf: Add selftest for check_stack_max_depth bug
bpf: Fix max stack depth check for async callbacks
====================
Link: https://lore.kernel.org/r/20230712223045.40182-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix ethernet header length field after stripping the mesh header
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CT5GNZSK28AI.2K6M69OXM9RW5@syracuse/
Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces")
Reported-and-tested-by: Nicolas Escande <nico.escande@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230711115052.68430-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RPL code has a pattern where skb_dst_drop() is called before
ip6_route_input().
However, ip6_route_input() calls skb_dst_drop() internally,
so we need not call skb_dst_drop() before ip6_route_input().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230710213511.5364-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kubernetes[1] is going to stick with /proc/net/tcp for a while.
This commit reduces the scheduling latency introduced by
established_get_first(), similar to commit acffb584cda7 ("net: diag:
add a scheduling point in inet_diag_dump_icsk()").
In our environment, the scheduling latency affects the performance of
latency-sensitive services like Redis.
Changes in V2 :
- call cond_resched() before checking if a bucket is empty as
suggested by Eric Dumazet
- removed the delay of synchronize_net() from the commit message
[1] https://github.com/google/cadvisor/blob/v0.47.2/container/libcontainer/handler.go#L130
Signed-off-by: Jian Wen <wenjian1@xiaomi.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230711032405.3253025-1-wenjian1@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kernel does not currently validate that both the minimum and maximum
ports of a port range are specified. This can lead user space to think
that a filter matching on a port range was successfully added, when in
fact it was not. For example, with a patched (buggy) iproute2 that only
sends the minimum port, the following commands do not return an error:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
# tc filter show dev swp1 ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
filter protocol ip pref 1 flower chain 0 handle 0x2
eth_type ipv4
ip_proto udp
not_in_hw
action order 1: gact action pass
random type none pass val 0
index 2 ref 1 bind 1
Fix by returning an error unless both ports are specified:
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp src_port 100-200 action pass
Error: Both min and max source ports must be specified.
We have an error talking to the kernel
# tc filter add dev swp1 ingress pref 1 proto ip flower ip_proto udp dst_port 100-200 action pass
Error: Both min and max destination ports must be specified.
We have an error talking to the kernel
Fixes: 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, verifier does not reject XDP programs that pass NULL pointer to
hints functions. At the same time, this case is not handled in any driver
implementation (including veth). For example, changing
bpf_xdp_metadata_rx_timestamp(ctx, ×tamp);
to
bpf_xdp_metadata_rx_timestamp(ctx, NULL);
in xdp_metadata test successfully crashes the system.
Add KF_TRUSTED_ARGS flag to hints kfunc definitions, so driver code
does not have to worry about getting invalid pointers.
Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs")
Reported-by: Stanislav Fomichev <sdf@google.com>
Closes: https://lore.kernel.org/bpf/ZKWo0BbpLfkZHbyE@google.com/
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230711105930.29170-1-larysa.zaremba@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We have for some time the __assign_bit() API to replace open coded
if (foo)
__set_bit(n, bar);
else
__clear_bit(n, bar);
Use this API in the code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Message-ID: <20230710100830.89936-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have for some time the assign_bit() API to replace open coded
if (foo)
set_bit(n, bar);
else
clear_bit(n, bar);
Use this API in the code. No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Message-ID: <20230710100830.89936-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When ipv6_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ipv6_vti device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
vti6_tnl_xmit+0x3e6/0x1ee0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
Allocated by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
netlink_sendmsg+0x9b1/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 9176:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x40
____kasan_slab_free+0x160/0x1c0
slab_free_freelist_hook+0x11b/0x220
kmem_cache_free+0xf0/0x490
skb_free_head+0x17f/0x1b0
skb_release_data+0x59c/0x850
consume_skb+0xd2/0x170
netlink_unicast+0x54f/0x7f0
netlink_sendmsg+0x926/0xe30
sock_sendmsg+0xde/0x190
____sys_sendmsg+0x739/0x920
___sys_sendmsg+0x110/0x1b0
__sys_sendmsg+0xf7/0x1c0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff88802e08ed00
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 194 bytes inside of
freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When the xfrm device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when the xfrm device sends IPv6 packets.
The stack information is as follows:
BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890
Read of size 1 at addr ffff8881111458ef by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.4.0-next-20230707 #409
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0xd9/0x150
print_address_description.constprop.0+0x2c/0x3c0
kasan_report+0x11d/0x130
decode_session6+0x103f/0x1890
__xfrm_decode_session+0x54/0xb0
xfrmi_xmit+0x173/0x1ca0
dev_hard_start_xmit+0x187/0x700
sch_direct_xmit+0x1a3/0xc30
__qdisc_run+0x510/0x17a0
__dev_queue_xmit+0x2215/0x3b10
neigh_connected_output+0x3c2/0x550
ip6_finish_output2+0x55a/0x1550
ip6_finish_output+0x6b9/0x1270
ip6_output+0x1f1/0x540
ndisc_send_skb+0xa63/0x1890
ndisc_send_rs+0x132/0x6f0
addrconf_rs_timer+0x3f1/0x870
call_timer_fn+0x1a0/0x580
expire_timers+0x29b/0x4b0
run_timer_softirq+0x326/0x910
__do_softirq+0x1d4/0x905
irq_exit_rcu+0xb7/0x120
sysvec_apic_timer_interrupt+0x97/0xc0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:intel_idle_hlt+0x23/0x30
Code: 1f 84 00 00 00 00 00 f3 0f 1e fa 41 54 41 89 d4 0f 1f 44 00 00 66 90 0f 1f 44 00 00 0f 00 2d c4 9f ab 00 0f 1f 44 00 00 fb f4 <fa> 44 89 e0 41 5c c3 66 0f 1f 44 00 00 f3 0f 1e fa 41 54 41 89 d4
RSP: 0018:ffffc90000197d78 EFLAGS: 00000246
RAX: 00000000000a83c3 RBX: ffffe8ffffd09c50 RCX: ffffffff8a22d8e5
RDX: 0000000000000001 RSI: ffffffff8d3f8080 RDI: ffffe8ffffd09c50
RBP: ffffffff8d3f8080 R08: 0000000000000001 R09: ffffed1026ba6d9d
R10: ffff888135d36ceb R11: 0000000000000001 R12: 0000000000000001
R13: ffffffff8d3f8100 R14: 0000000000000001 R15: 0000000000000000
cpuidle_enter_state+0xd3/0x6f0
cpuidle_enter+0x4e/0xa0
do_idle+0x2fe/0x3c0
cpu_startup_entry+0x18/0x20
start_secondary+0x200/0x290
secondary_startup_64_no_verify+0x167/0x16b
</TASK>
Allocated by task 939:
kasan_save_stack+0x22/0x40
kasan_set_track+0x25/0x30
__kasan_slab_alloc+0x7f/0x90
kmem_cache_alloc_node+0x1cd/0x410
kmalloc_reserve+0x165/0x270
__alloc_skb+0x129/0x330
inet6_ifa_notify+0x118/0x230
__ipv6_ifa_notify+0x177/0xbe0
addrconf_dad_completed+0x133/0xe00
addrconf_dad_work+0x764/0x1390
process_one_work+0xa32/0x16f0
worker_thread+0x67d/0x10c0
kthread+0x344/0x440
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888111145800
which belongs to the cache skbuff_small_head of size 640
The buggy address is located 239 bytes inside of
freed 640-byte region [ffff888111145800, ffff888111145a80)
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
Fixes: f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
