| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I also fix commit 8b32ab9e6ef1: use nla_total_size_64bit() for
OVS_FLOW_ATTR_USED in ovs_flow_cmd_msg_size().
Fixes: 8b32ab9e6ef1 ("ovs: use nla_put_u64_64bit()")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I also fix the value of INET_DIAG_MAX. It's wrong since commit 8f840e47f190
which is only in net-next right now, thus I didn't make a separate patch.
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was a simple idea -- save IPv6 configured addresses on a link down
so that IPv6 behaves similar to IPv4. As always the devil is in the
details and the IPv6 stack as too many behavioral differences from IPv4
making the simple idea more complicated than it needs to be.
The current implementation for keeping IPv6 addresses can panic or spit
out a warning in one of many paths:
1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in
rt6_fill_node while handling a route dump request.
2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in
fib6_del
3. Panic in fib6_purge_rt because rt6i_ref count is not 1.
The root cause of all these is references related to the host route for
an address that is retained.
So, this patch deletes the host route every time the ifdown loop runs.
Since the host route is deleted and will be re-generated an up there is
no longer a need for the l3mdev fix up. On the 'admin up' side move
addrconf_permanent_addr into the NETDEV_UP event handling so that it
runs only once versus on UP and CHANGE events.
All of the current panics and warnings appear to be related to
addresses on the loopback device, but given the catastrophic nature when
a bug is triggered this patch takes the conservative approach and evicts
all host routes rather than trying to determine when it can be re-used
and when it can not. That can be a later optimizaton if desired.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 841645b5f2dfceac69b78fcd0c9050868d41ea61.
Ok, this puts the feature back. I've decided to apply David A.'s
bug fix and run with that rather than make everyone wait another
whole release for this feature.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since cfg80211 maintains separate BSS table entries for APs if the same
BSSID, SSID pair is seen on multiple channels, it is possible that it
can map the current_bss to a BSS entry on the wrong channel. This
current_bss will not get flushed unless disconnected and cfg80211
reports a wrong channel as the associated channel.
Fix this by introducing a new cfg80211_connect_bss() function which is
similar to cfg80211_connect_result(), but it includes an additional
parameter: the bss the STA is connected to. This allows drivers to
provide the exact bss entry that matches the BSS to which the connection
was completed.
Reviewed-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com>
Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for the a station statistics netlink attribute:
NL80211_STA_INFO_RX_DURATION.
If present, this attribute contains the aggregate PPDU duration (in
microseconds) for all the frames from the peer. This is useful to
help understand the total time spent transmitting to us by all of
the connected peers.
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support checksum neutral ILA as described in the ILA draft. The low
order 16 bits of the identifier are used to contain the checksum
adjustment value.
The csum-mode parameter is added to described checksum processing. There
are three values:
- adjust transport checksum (previous behavior)
- do checksum neutral mapping
- do nothing
On output the csum-mode in the ila_params is checked and acted on. If
mode is checksum neutral mapping then to mapping and set C-bit.
On input, C-bit is checked. If it is set checksum-netural mapping is
done (regardless of csum-mode in ila params) and C-bit will be cleared.
If it is not set then action in csum-mode is taken.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change model of xlat to be used only for input where lookup is done on
the locator part of an address (comparing to locator_match as key
in rhashtable). This is needed for checksum neutral translation
which obfuscates the low order 16 bits of the identifier. It also
permits hosts to be in muliple ILA domains (each locator can map
to a different SIR address). A check is also added to disallow
translating non-ILA addresses (check of type in identifier).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add structures for identifiers, locators, and an ila address which
is composed of a locator and identifier and in6_addr can be cast to
it. This includes a three bit type field and enums for the types defined
in ILA I-D.
In ILA lwt don't allow user to set a translation for a non-ILA
address (type of identifier is zero meaning it is an IID). This also
requires that the destination prefix is at least 65 bytes (64
bit locator and first byte of identifier).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The memcpy of ipv6 header destination address to the skb control block
(sbk->cb) in header_create() results in currupted memory when bt_xmit()
is issued. The skb->cb is "released" in the return of header_create()
making room for lower layer to minipulate the skb->cb.
The value retrieved in bt_xmit is not persistent across header creation
and sending, and the lower layer will overwrite portions of skb->cb,
making the copied destination address wrong.
The memory corruption will lead to non-working multicast as the first 4
bytes of the copied destination address is replaced by a value that
resolves into a non-multicast prefix.
This fix removes the dependency on the skb control block between header
creation and send, by moving the destination address memcpy to the send
function path (setup_create, which is called from bt_xmit).
Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no>
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.5+
|
|
rds-stress experiments with request size 256 bytes, 8K acks,
using 16 threads show a 40% improvment when pskb_extract()
replaces the {skb_clone(..); pskb_pull(..); pskb_trim(..);}
pattern in the Rx path, so we leverage the perf gain with
this commit.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A pattern of skb usage seen in modules such as RDS-TCP is to
extract `to_copy' bytes from the received TCP segment, starting
at some offset `off' into a new skb `clone'. This is done in
the ->data_ready callback, where the clone skb is queued up for rx on
the PF_RDS socket, while the parent TCP segment is returned unchanged
back to the TCP engine.
The existing code uses the sequence
clone = skb_clone(..);
pskb_pull(clone, off, ..);
pskb_trim(clone, to_copy, ..);
with the intention of discarding the first `off' bytes. However,
skb_clone() + pskb_pull() implies pksb_expand_head(), which ends
up doing a redundant memcpy of bytes that will then get discarded
in __pskb_pull_tail().
To avoid this inefficiency, this commit adds pskb_extract() that
creates the clone, and memcpy's only the relevant header/frag/frag_list
to the start of `clone'. pskb_trim() is then invoked to trim clone
down to the requested to_copy bytes.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was impossible to include codel.h for the
purpose of having access to codel_params or
codel_vars structure definitions and using them
for embedding in other more complex structures.
This splits allows codel.h itself to be treated
like any other header file while codel_qdisc.h and
codel_impl.h contain function definitions with
logic that was previously in codel.h.
This copies over copyrights and doesn't involve
code changes other than adding a few additional
include directives to net/sched/sch*codel.c.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This strips out qdisc specific bits from the code
and makes it slightly more reusable. Codel will be
used by wireless/mac80211 in the future.
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We should call consume_skb(skb) when skb is properly consumed,
or kfree_skb(skb) when skb must be dropped in error case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We now have proper per-listener but also per network namespace counters
for SYN packets that might be dropped.
We replace the kfree_skb() by consume_skb() to be drop monitor [1]
friendly, and remove an obsolete comment.
FastOpen SYN packets can carry payload in them just fine.
[1] perf record -a -g -e skb:kfree_skb sleep 1; perf report
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts the following three commits:
70af921db6f8835f4b11c65731116560adb00c14
799977d9aafbf0ca0b9c39b04cbfb16db71302c9
f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac
The feature was ill conceived, has terrible semantics, and has added
nothing but regressions to the already fragile ipv6 stack.
Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting the kernel client with cephx disabled and then enabling cephx
and restarting userspace daemons can result in a crash:
[262671.478162] BUG: unable to handle kernel paging request at ffffebe000000000
[262671.531460] IP: [<ffffffff811cd04a>] kfree+0x5a/0x130
[262671.584334] PGD 0
[262671.635847] Oops: 0000 [#1] SMP
[262672.055841] CPU: 22 PID: 2961272 Comm: kworker/22:2 Not tainted 4.2.0-34-generic #39~14.04.1-Ubuntu
[262672.162338] Hardware name: Dell Inc. PowerEdge R720/068CDY, BIOS 2.4.3 07/09/2014
[262672.268937] Workqueue: ceph-msgr con_work [libceph]
[262672.322290] task: ffff88081c2d0dc0 ti: ffff880149ae8000 task.ti: ffff880149ae8000
[262672.428330] RIP: 0010:[<ffffffff811cd04a>] [<ffffffff811cd04a>] kfree+0x5a/0x130
[262672.535880] RSP: 0018:ffff880149aeba58 EFLAGS: 00010286
[262672.589486] RAX: 000001e000000000 RBX: 0000000000000012 RCX: ffff8807e7461018
[262672.695980] RDX: 000077ff80000000 RSI: ffff88081af2be04 RDI: 0000000000000012
[262672.803668] RBP: ffff880149aeba78 R08: 0000000000000000 R09: 0000000000000000
[262672.912299] R10: ffffebe000000000 R11: ffff880819a60e78 R12: ffff8800aec8df40
[262673.021769] R13: ffffffffc035f70f R14: ffff8807e5b138e0 R15: ffff880da9785840
[262673.131722] FS: 0000000000000000(0000) GS:ffff88081fac0000(0000) knlGS:0000000000000000
[262673.245377] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[262673.303281] CR2: ffffebe000000000 CR3: 0000000001c0d000 CR4: 00000000001406e0
[262673.417556] Stack:
[262673.472943] ffff880149aeba88 ffff88081af2be04 ffff8800aec8df40 ffff88081af2be04
[262673.583767] ffff880149aeba98 ffffffffc035f70f ffff880149aebac8 ffff8800aec8df00
[262673.694546] ffff880149aebac8 ffffffffc035c89e ffff8807e5b138e0 ffff8805b047f800
[262673.805230] Call Trace:
[262673.859116] [<ffffffffc035f70f>] ceph_x_destroy_authorizer+0x1f/0x50 [libceph]
[262673.968705] [<ffffffffc035c89e>] ceph_auth_destroy_authorizer+0x3e/0x60 [libceph]
[262674.078852] [<ffffffffc0352805>] put_osd+0x45/0x80 [libceph]
[262674.134249] [<ffffffffc035290e>] remove_osd+0xae/0x140 [libceph]
[262674.189124] [<ffffffffc0352aa3>] __reset_osd+0x103/0x150 [libceph]
[262674.243749] [<ffffffffc0354703>] kick_requests+0x223/0x460 [libceph]
[262674.297485] [<ffffffffc03559e2>] ceph_osdc_handle_map+0x282/0x5e0 [libceph]
[262674.350813] [<ffffffffc035022e>] dispatch+0x4e/0x720 [libceph]
[262674.403312] [<ffffffffc034bd91>] try_read+0x3d1/0x1090 [libceph]
[262674.454712] [<ffffffff810ab7c2>] ? dequeue_entity+0x152/0x690
[262674.505096] [<ffffffffc034cb1b>] con_work+0xcb/0x1300 [libceph]
[262674.555104] [<ffffffff8108fb3e>] process_one_work+0x14e/0x3d0
[262674.604072] [<ffffffff810901ea>] worker_thread+0x11a/0x470
[262674.652187] [<ffffffff810900d0>] ? rescuer_thread+0x310/0x310
[262674.699022] [<ffffffff810957a2>] kthread+0xd2/0xf0
[262674.744494] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0
[262674.789543] [<ffffffff817bd81f>] ret_from_fork+0x3f/0x70
[262674.834094] [<ffffffff810956d0>] ? kthread_create_on_node+0x1c0/0x1c0
What happens is the following:
(1) new MON session is established
(2) old "none" ac is destroyed
(3) new "cephx" ac is constructed
...
(4) old OSD session (w/ "none" authorizer) is put
ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer)
osd->o_auth.authorizer in the "none" case is just a bare pointer into
ac, which contains a single static copy for all services. By the time
we get to (4), "none" ac, freed in (2), is long gone. On top of that,
a new vtable installed in (3) points us at ceph_x_destroy_authorizer(),
so we end up trying to destroy a "none" authorizer with a "cephx"
destructor operating on invalid memory!
To fix this, decouple authorizer destruction from ac and do away with
a single static "none" authorizer by making a copy for each OSD or MDS
session. Authorizers themselves are independent of ac and so there is
no reason for destroy_authorizer() to be an ac op. Make it an op on
the authorizer itself by turning ceph_authorizer into a real struct.
Fixes: http://tracker.ceph.com/issues/15447
Reported-by: Alan Zhang <alan.zhang@linux.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
|
|
d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets")
was merged as a bug fix to the net tree. Two conflicting changes
were committed to net-next before the above fix was merged back to
net-next:
ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU")
3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood")
These changes switched the datastructure used for TCP and UDP sockets
from hlist_nulls to hlist. This patch applies the necessary parts
of the net tree fix to net-next which were not automatic as part of the
merge.
Fixes: 1602f49b58ab ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next
Simon Horman says:
====================
IPVS Updates for v4.7
please consider these enhancements to the IPVS. They allow SIP connections
originating from real-servers to be load balanced by the SIP psersitence
engine as is already implemented in the other direction. And for better one
packet scheduling (OPS) performance.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
returns NULL
ip6_route_output() will never return a NULL pointer, so there's no need
to check it.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Four years ago we introduced a new sysctl knob to disable automatic
helper assignment in 72110dfaa907 ("netfilter: nf_ct_helper: disable
automatic helper assignment"). This knob kept this behaviour enabled by
default to remain conservative.
This measure was introduced to provide a secure way to configure
iptables and connection tracking helpers through explicit rules.
Give the time we have waited for this, let's turn off this by default
now, worse case users still have a chance to recover the former
behaviour by explicitly enabling this back through sysctl.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch fixes dynamic element updates for adjacent intervals in the
rb-tree representation.
Since elements are sorted in the rb-tree, in case of adjacent nodes with
the same key, the assumption is that an interval end node must be placed
before an interval opening.
In tree lookup operations, the idea is to search for the closer element
that is smaller than the one we're searching for. Given that we'll have
two possible matchings, we have to take the opening interval in case of
adjacent nodes.
Range merges are not trivial with the current representation,
specifically we have to check if node extensions are equal and make sure
we keep the existing internal states around.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add this new nft_rbtree_interval_end() helper function to check in the
end interval is set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Parse flags and pass them to the set via ->deactivate() to check if we
remove the right element from the intervals.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This function parses the set element flags, thus, we can reuse the same
handling when deleting elements.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As earlier commit removed accessed to the hash from other files we can
also make it static.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use a private seed and init it using get_random_once.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We only allow rehash in init namespace, so we only use
init_ns.generation. And even if we would allow it, it makes no sense
as the conntrack locks are global; any ongoing rehash prevents insert/
delete.
So make this private to nf_conntrack_core instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After commit fbd40ea0180a ("ipv4: Don't do expensive useless work
during inetdev destroy.") when deleting an interface,
fib_del_ifaddr() can be executed without any primary address
present on the dead interface.
The above is safe, but triggers some "bug: prim == NULL" warnings.
This commit avoids warning if the in_dev is dead
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Linux TCP stack painfully segments all TSO/GSO packets before retransmits.
This was fine back in the days when TSO/GSO were emerging, with their
bugs, but we believe the dark age is over.
Keeping big packets in write queues, but also in stack traversal
has a lot of benefits.
- Less memory overhead, because write queues have less skbs
- Less cpu overhead at ACK processing.
- Better SACK processing, as lot of studies mentioned how
awful linux was at this ;)
- Less cpu overhead to send the rtx packets
(IP stack traversal, netfilter traversal, drivers...)
- Better latencies in presence of losses.
- Smaller spikes in fq like packet schedulers, as retransmits
are not constrained by TCP Small Queues.
1 % packet losses are common today, and at 100Gbit speeds, this
translates to ~80,000 losses per second.
Losses are often correlated, and we see many retransmit events
leading to 1-MSS train of packets, at the time hosts are already
under stress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 42b18f605fea ("tipc: refactor function tipc_link_timeout()"),
introduced a bug which prevents sending of probe messages during
link synchronization phase. This leads to hanging links, if the
bearer is disabled/enabled after links are up.
In this commit, we send the probe messages correctly.
Fixes: 42b18f605fea ("tipc: refactor function tipc_link_timeout()")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a race-condition when updating the mdb offload flag without using
the mulicast_lock. This reverts commit 9e8430f8d60d98 ("bridge: mdb:
Passing the port-group pointer to br_mdb module").
This patch marks offloaded MDB entry as "offload" by changing the port-
group flags and marks it as MDB_PG_FLAGS_OFFLOAD.
When switchdev PORT_MDB succeeded and adds a multicast group, a completion
callback is been invoked "br_mdb_complete". The completion function
locks the multicast_lock and finds the right net_bridge_port_group and
marks it as offloaded.
Fixes: 9e8430f8d60d98 ("bridge: mdb: Passing the port-group pointer to br_mdb module")
Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is duplicate code that translates br_mdb_entry to br_ip let's wrap it
in a common function.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using switchdev deferred operation (SWITCHDEV_F_DEFER), the operation
is executed in different context and the application doesn't have any way
to get the operation real status.
Adding a completion callback fixes that. This patch adds fields to
switchdev_attr and switchdev_obj "complete_priv" field which is used by
the "complete" callback.
Application can set a complete function which will be called once the
operation executed.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When collapsing skbs, txstamp_ack also needs to be merged.
Retrans Collapse Test:
~~~~~~
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
0.200 write(4, ..., 730) = 730
+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
0.200 write(4, ..., 730) = 730
+0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0
0.200 write(4, ..., 11680) = 11680
0.200 > P. 1:731(730) ack 1
0.200 > P. 731:1461(730) ack 1
0.200 > . 1461:8761(7300) ack 1
0.200 > P. 8761:13141(4380) ack 1
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:2921,nop,nop>
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:4381,nop,nop>
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:5841,nop,nop>
0.300 > P. 1:1461(1460) ack 1
0.400 < . 1:1(0) ack 13141 win 257
BPF Output Before:
~~~~~
<No output due to missing SCM_TSTAMP_ACK timestamp>
BPF Output After:
~~~~~
<...>-2027 [007] d.s. 79.765921: : ee_data:1459
Sacks Collapse Test:
~~~~~
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
0.200 write(4, ..., 1460) = 1460
+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
0.200 write(4, ..., 13140) = 13140
+0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0
0.200 > P. 1:1461(1460) ack 1
0.200 > . 1461:8761(7300) ack 1
0.200 > P. 8761:14601(5840) ack 1
0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop>
0.300 > P. 1:1461(1460) ack 1
0.400 < . 1:1(0) ack 14601 win 257
BPF Output Before:
~~~~~
<No output due to missing SCM_TSTAMP_ACK timestamp>
BPF Output After:
~~~~~
<...>-2049 [007] d.s. 89.185538: : ee_data:14599
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a tcp skb is sliced into two smaller skbs (e.g. in
tcp_fragment() and tso_fragment()), it does not carry
the txstamp_ack bit to the newly created skb if it is needed.
The end result is a timestamping event (SCM_TSTAMP_ACK) will
be missing from the sk->sk_error_queue.
This patch carries this bit to the new skb2
in tcp_fragment_tstamp().
BPF Output Before:
~~~~~~
<No output due to missing SCM_TSTAMP_ACK timestamp>
BPF Output After:
~~~~~~
<...>-2050 [000] d.s. 100.928763: : ee_data:14599
Packetdrill Script:
~~~~~~
+0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10`
+0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1`
+0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
+0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0
+0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0
0.200 write(4, ..., 14600) = 14600
+0 setsockopt(4, SOL_SOCKET, 37, [2176], 4) = 0
0.200 > . 1:7301(7300) ack 1
0.200 > P. 7301:14601(7300) ack 1
0.300 < . 1:1(0) ack 14601 win 257
0.300 close(4) = 0
0.300 > F. 14601:14601(0) ack 1
0.400 < F. 1:1(0) ack 16062 win 257
0.400 > . 14602:14602(0) ack 2
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When removing a single interface while a broadcast or ogm packet is
still pending then we will free the forward packet without releasing the
queue slots again.
This patch is supposed to fix this issue.
Fixes: 6d5808d4ae1b ("batman-adv: Add missing hardif_free_ref in forw_packet_free")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
|
