| Age | Commit message (Collapse) | Author |
|---|
|
Add definitions related to EHT mode and airtime calculation
according to the 802.11BE_D4.0.
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240904111256.11734-1-mingyen.hsieh@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Avoid overriding BSS information generated from MBSSID or direct source
with BSS information generated from per-STA profile source to avoid
losing actual signal strength and information elements such as RNR and
Basic ML elements.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently signal of the BSS entry generated from the per-STA profile
indicated as zero, but userspace may consider it as high signal
strength since 0 dBm is a valid RSSI value.
To avoid this don't report the signal to userspace when the BSS entry
created from a per-STA profile.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-3-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Define public enum with BSS source types in core.h. Upcoming patches
need this to store BSS source type in struct cfg80211_internal_bss.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904030917.3602369-2-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace rcu_dereference() with rcu_access_pointer() since we already
hold the lock and own the 'tmp' at this point. This is needed to avoid
suspicious rcu_dereference_check warnings in__cfg80211_bss_update error
paths.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://patch.msgid.link/20240904142021.3887360-1-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len)
return -ERANGE;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found an use-after-free Read in ila_nf_input [1]
Issue here is that ila_xlat_exit_net() frees the rhashtable,
then call nf_unregister_net_hooks().
It should be done in the reverse way, with a synchronize_rcu().
This is a good match for a pre_exit() method.
[1]
BUG: KASAN: use-after-free in rht_key_hashfn include/linux/rhashtable.h:159 [inline]
BUG: KASAN: use-after-free in __rhashtable_lookup include/linux/rhashtable.h:604 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup include/linux/rhashtable.h:646 [inline]
BUG: KASAN: use-after-free in rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
Read of size 4 at addr ffff888064620008 by task ksoftirqd/0/16
CPU: 0 UID: 0 PID: 16 Comm: ksoftirqd/0 Not tainted 6.11.0-rc4-syzkaller-00238-g2ad6d23f465a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
__rhashtable_lookup include/linux/rhashtable.h:604 [inline]
rhashtable_lookup include/linux/rhashtable.h:646 [inline]
rhashtable_lookup_fast+0x77a/0x9b0 include/linux/rhashtable.h:672
ila_lookup_wildcards net/ipv6/ila/ila_xlat.c:132 [inline]
ila_xlat_addr net/ipv6/ila/ila_xlat.c:652 [inline]
ila_nf_input+0x1fe/0x3c0 net/ipv6/ila/ila_xlat.c:190
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK+0x29e/0x450 include/linux/netfilter.h:312
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1ea/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6108
__napi_poll+0xcb/0x490 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6963
handle_softirqs+0x2c4/0x970 kernel/softirq.c:554
run_ksoftirqd+0xca/0x130 kernel/softirq.c:928
smpboot_thread_fn+0x544/0xa30 kernel/smpboot.c:164
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x64620
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xbfffffff(buddy)
raw: 00fff00000000000 ffffea0000959608 ffffea00019d9408 0000000000000000
raw: 0000000000000000 0000000000000003 00000000bfffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 5242, tgid 5242 (syz-executor), ts 73611328570, free_ts 618981657187
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1493
prep_new_page mm/page_alloc.c:1501 [inline]
get_page_from_freelist+0x2e4c/0x2f10 mm/page_alloc.c:3439
__alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4695
__alloc_pages_node_noprof include/linux/gfp.h:269 [inline]
alloc_pages_node_noprof include/linux/gfp.h:296 [inline]
___kmalloc_large_node+0x8b/0x1d0 mm/slub.c:4103
__kmalloc_large_node_noprof+0x1a/0x80 mm/slub.c:4130
__do_kmalloc_node mm/slub.c:4146 [inline]
__kmalloc_node_noprof+0x2d2/0x440 mm/slub.c:4164
__kvmalloc_node_noprof+0x72/0x190 mm/util.c:650
bucket_table_alloc lib/rhashtable.c:186 [inline]
rhashtable_init_noprof+0x534/0xa60 lib/rhashtable.c:1071
ila_xlat_init_net+0xa0/0x110 net/ipv6/ila/ila_xlat.c:613
ops_init+0x359/0x610 net/core/net_namespace.c:139
setup_net+0x515/0xca0 net/core/net_namespace.c:343
copy_net_ns+0x4e2/0x7b0 net/core/net_namespace.c:508
create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228
ksys_unshare+0x619/0xc10 kernel/fork.c:3328
__do_sys_unshare kernel/fork.c:3399 [inline]
__se_sys_unshare kernel/fork.c:3397 [inline]
__x64_sys_unshare+0x38/0x40 kernel/fork.c:3397
page last free pid 11846 tgid 11846 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1094 [inline]
free_unref_page+0xd22/0xea0 mm/page_alloc.c:2612
__folio_put+0x2c8/0x440 mm/swap.c:128
folio_put include/linux/mm.h:1486 [inline]
free_large_kmalloc+0x105/0x1c0 mm/slub.c:4565
kfree+0x1c4/0x360 mm/slub.c:4588
rhashtable_free_and_destroy+0x7c6/0x920 lib/rhashtable.c:1169
ila_xlat_exit_net+0x55/0x110 net/ipv6/ila/ila_xlat.c:626
ops_exit_list net/core/net_namespace.c:173 [inline]
cleanup_net+0x802/0xcc0 net/core/net_namespace.c:640
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Memory state around the buggy address:
ffff88806461ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88806461ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888064620000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888064620080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888064620100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 7f00feaf1076 ("ila: Add generic ILA translation facility")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240904144418.1162839-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 980ca8ceeae6 ("bpf: check bpf_dummy_struct_ops program params for
test runs") does bitwise AND between reg_type and PTR_MAYBE_NULL, which
is correct, but due to type difference the compiler complains:
net/bpf/bpf_dummy_struct_ops.c:118:31: warning: bitwise operation between different enumeration types ('const enum bpf_reg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
118 | if (info && (info->reg_type & PTR_MAYBE_NULL))
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Workaround the warning by moving the type_may_be_null() helper from
verifier.c into bpf_verifier.h, and reuse it here to check whether param
is nullable.
Fixes: 980ca8ceeae6 ("bpf: check bpf_dummy_struct_ops program params for test runs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404241956.HEiRYwWq-lkp@intel.com/
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240905055233.70203-1-shung-hsi.yu@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We have STAT_FILL_EMPTY test case in xskxceiver that tries to process
traffic with fill queue being empty which currently fails for zero copy
ice driver after it started to use xsk_buff_can_alloc() API. That is
because xsk_queue::queue_empty_descs is currently only increased from
alloc APIs and right now if driver sees that xsk_buff_pool will be
unable to provide the requested count of buffers, it bails out early,
skipping calls to xsk_buff_alloc{_batch}().
Mentioned statistic should be handled in xsk_buff_can_alloc() from the
very beginning, so let's add this logic now. Do it by open coding
xskq_cons_has_entries() and bumping queue_empty_descs in the middle when
fill queue currently has no entries.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240904162808.249160-1-maciej.fijalkowski@intel.com
|
|
In sch_cake, we keep track of the count of active bulk flows per host,
when running in dst/src host fairness mode, which is used as the
round-robin weight when iterating through flows. The count of active
bulk flows is updated whenever a flow changes state.
This has a peculiar interaction with the hash collision handling: when a
hash collision occurs (after the set-associative hashing), the state of
the hash bucket is simply updated to match the new packet that collided,
and if host fairness is enabled, that also means assigning new per-host
state to the flow. For this reason, the bulk flow counters of the
host(s) assigned to the flow are decremented, before new state is
assigned (and the counters, which may not belong to the same host
anymore, are incremented again).
Back when this code was introduced, the host fairness mode was always
enabled, so the decrement was unconditional. When the configuration
flags were introduced the *increment* was made conditional, but
the *decrement* was not. Which of course can lead to a spurious
decrement (and associated wrap-around to U16_MAX).
AFAICT, when host fairness is disabled, the decrement and wrap-around
happens as soon as a hash collision occurs (which is not that common in
itself, due to the set-associative hashing). However, in most cases this
is harmless, as the value is only used when host fairness mode is
enabled. So in order to trigger an array overflow, sch_cake has to first
be configured with host fairness disabled, and while running in this
mode, a hash collision has to occur to cause the overflow. Then, the
qdisc has to be reconfigured to enable host fairness, which leads to the
array out-of-bounds because the wrapped-around value is retained and
used as an array index. It seems that syzbot managed to trigger this,
which is quite impressive in its own right.
This patch fixes the issue by introducing the same conditional check on
decrement as is used on increment.
The original bug predates the upstreaming of cake, but the commit listed
in the Fixes tag touched that code, meaning that this patch won't apply
before that.
Fixes: 712639929912 ("sch_cake: Make the dual modes fairer")
Reported-by: syzbot+7fe7b81d602cc1e6b94d@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20240903160846.20909-1-toke@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when calling ip_route_output_ports() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240903135327.2810535-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when calling ip_route_output_ports() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240903135327.2810535-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unmask the upper DSCP bits when calling ip_route_output_ports() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240903135327.2810535-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function is passed the full DS field in its 'tos' argument by its
two callers. It then masks the upper DSCP bits using RT_TOS() when
passing it to ip_route_output_ports().
Unmask the upper DSCP bits when passing 'tos' to ip_route_output_ports()
so that in the future it could perform the FIB lookup according to the
full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240903135327.2810535-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit aa92c1cec92b ("l2tp: add tunnel/session get_next helpers") uses
idr_get_next APIs to iterate over l2tp session IDR lists. Sessions in
l2tp_v2_session_idr always have a non-null session->tunnel pointer
since l2tp_session_register sets it before inserting the session into
the IDR. Therefore the null check on session->tunnel in
l2tp_v2_session_get_next is redundant and can be removed. Removing the
check avoids a warning from lkp.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202408111407.HtON8jqa-lkp@intel.com/
CC: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: James Chapman <jchapman@katalix.com>
Acked-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903113547.1261048-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().
If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.
If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.
Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.
Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We observed a null-ptr-deref in fou_gro_receive() while shutting down
a host. [0]
The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol
in struct fou.
When fou_release() is called due to netns dismantle or explicit tunnel
teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data.
Then, the tunnel socket is destroyed after a single RCU grace period.
So, in-flight udp4_gro_receive() could find the socket and execute the
FOU GRO handler, where sk->sk_user_data could be NULL.
Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL
checks in FOU GRO handlers.
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0
SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1
Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou]
Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42
RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010
RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08
RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002
R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400
R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0
FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
? no_context (arch/x86/mm/fault.c:752)
? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483)
? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571)
? fou_gro_receive (net/ipv4/fou.c:233) [fou]
udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559)
udp4_gro_receive (net/ipv4/udp_offload.c:604)
inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7))
dev_gro_receive (net/core/dev.c:6035 (discriminator 4))
napi_gro_receive (net/core/dev.c:6170)
ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena]
ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena]
napi_poll (net/core/dev.c:6847)
net_rx_action (net/core/dev.c:6917)
__do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299)
asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809)
</IRQ>
do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77)
irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435)
common_interrupt (arch/x86/kernel/irq.c:239)
asm_common_interrupt (arch/x86/include/asm/idtentry.h:626)
RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575)
Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00
RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900
RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64
RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044
R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001
R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000
? sched_clock_cpu (kernel/sched/clock.c:371)
acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3))
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237)
cpuidle_enter (drivers/cpuidle/cpuidle.c:353)
cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239)
do_idle (kernel/sched/idle.c:302)
cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1))
start_kernel (init/main.c:1048)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310)
Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel
CR2: 0000000000000008
Fixes: d92283e338f6 ("fou: change to use UDP socket GRO")
Reported-by: Alphonse Kurian <alkurian@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, a few issues have been discovered around the creation of
additional subflows. Without these counters, it was difficult to point
out the reason why some subflows were not created as expected.
These counters should have been added earlier, because there is no other
simple ways to extract such information from the kernel, and understand
why subflows have not been created.
While at it, some pr_debug() have been added, just in case the errno
needs to be printed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/509
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-3-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__mptcp_subflow_connect() is currently called from the path-managers,
which have all the required information to create subflows. No need to
call the PM again to re-iterate over the list of entries with RCU lock
to get more info.
Instead, it is possible to pass a mptcp_pm_addr_entry structure, instead
of a mptcp_addr_info one. The former contains the ifindex and the flags
that are required when creating the new subflow.
This is a partial revert of commit ee285257a9c1 ("mptcp: drop flags and
ifindex arguments").
While at it, the local ID can also be set if it is known and 0, to avoid
having to set it in the 'rebuild_header' hook, which will cause a new
iteration of the endpoint entries.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-2-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename all the helpers specific to the flushing operations to make it
clear that the intention is to flush all created subflows, and remove
all announced addresses, not just a specific selection.
That way, it is easier to understand why the id_avail_bitmap and
local_addr_used are reset at the end.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-1-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of
net_timestamp_check() being called in the device independent code.
Move the responsibility of reporting SOF_TIMESTAMPING_RX_SOFTWARE and
SOF_TIMESTAMPING_SOFTWARE, and setting PHC index to -1 to the core.
Device drivers no longer need to use them.
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Link: https://lore.kernel.org/netdev/661550e348224_23a2b2294f7@willemb.c.googlers.com.notmuch/
Co-developed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240901112803.212753-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <yanghui.li@mediatek.com>
Signed-off-by: Yanghui Li <yanghui.li@mediatek.com>
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.
But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:
>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'
Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/
Fixes: 74293ea1c4db ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9ab ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch improves two checks on user data.
The first one prevents bit 23 from being set, as specified by RFC 9197
(Sec 4.4.1):
Bit 23 Reserved; MUST be set to zero upon transmission and be
ignored upon receipt. This bit is reserved to allow for
future extensions of the IOAM Trace-Type bit field.
The second one checks that the tunnel destination address !=
IPV6_ADDR_ANY, just like we already do for the tunnel source address.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20240830191919.51439-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store new timeout and expiration in transaction object, use them to
update elements from .commit path. Otherwise, discard update if .abort
path is exercised.
Use update_flags in the transaction to note whether the timeout,
expiration, or both need to be updated.
Annotate access to timeout extension now that it can be updated while
lockless read access is possible.
Reject timeout updates on elements with no timeout extension.
Element transaction remains in the 96 bytes kmalloc slab on x86_64 after
this update.
This patch requires ("netfilter: nf_tables: use timestamp to check for
set element timeout") to make sure an element does not expire while
transaction is ongoing.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch uses zero as timeout marker for those elements that never expire
when the element is created.
If userspace provides no timeout for an element, then the default set
timeout applies. However, if no default set timeout is specified and
timeout flag is set on, then timeout extension is allocated and timeout
is set to zero to allow for future updates.
Use of zero a never timeout marker has been suggested by Phil Sutter.
Note that, in older kernels, it is already possible to define elements
that never expire by declaring a set with the set timeout flag set on
and no global set timeout, in this case, new element with no explicit
timeout never expire do not allocate the timeout extension, hence, they
never expire. This approach makes it complicated to accomodate element
timeout update, because element extensions do not support reallocations.
Therefore, allocate the timeout extension and use the new marker for
this case, but do not expose it to userspace to retain backward
compatibility in the set listing.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Expiration and timeout are stored in separated set element extensions,
but they are tightly coupled. Consolidate them in a single extension to
simplify and prepare for set element updates.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
element expiration can be read-write locklessly, it can be written by
dynset and read from netlink dump, add annotation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
set timeout can be read locklessly while being updated from control
plane, add annotation.
Fixes: 123b99619cca ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Mutex is held when adding an element, no need for READ_ONCE, remove it.
Fixes: 123b99619cca ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Report ERANGE to userspace if user specifies an expiration larger than
the timeout.
Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If element timeout is unset and set provides no default timeout, the
element expiration is silently ignored, reject this instead to let user
know this is unsupported.
Also prepare for supporting timeout that never expire, where zero
timeout and expiration must be also rejected.
Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Element timeout that is below CONFIG_HZ never expires because the
timeout extension is not allocated given that nf_msecs_to_jiffies64()
returns 0. Set timeout to the minimum value to honor timeout.
Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
NETIF_F_ALL_FCOE is used only in vlan_dev.c, 2 times. Now that it's only
2 bits, open-code it and remove the definition from netdev_features.h.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Ability to handle maximum FCoE frames of 2158 bytes can never be changed
and thus more of an attribute, not a toggleable feature.
Move it from netdev_features_t to "cold" priv flags (bitfield bool) and
free yet another feature bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since commit a654de8fdc18 ("netfilter: nf_tables: fix chain dependency validation")
the validate() callback no longer needs the return pointer argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the ERR_CAST macro to clearly indicate that this is a pointer
to an error value and that a type conversion was performed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When we are allocating an array, using kmemdup_array() to take care about
multiplication and possible overflows.
Also it makes auditing the code easier.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The nft_counter uses two s64 counters for statistics. Those two are
protected by a seqcount to ensure that the 64bit variable is always
properly seen during updates even on 32bit architectures where the store
is performed by two writes. A side effect is that the two counter (bytes
and packet) are written and read together in the same window.
This can be replaced with u64_stats_t. write_seqcount_begin()/ end() is
replaced with u64_stats_update_begin()/ end() and behaves the same way
as with seqcount_t on 32bit architectures. Additionally there is a
preempt_disable on PREEMPT_RT to ensure that a reader does not preempt a
writer.
On 64bit architectures the macros are removed and the reads happen
without any retries. This also means that the reader can observe one
counter (bytes) from before the update and the other counter (packets)
but that is okay since there is no requirement to have both counter from
the same update window.
Convert the statistic to u64_stats_t. There is one optimisation:
nft_counter_do_init() and nft_counter_clone() allocate a new per-CPU
counter and assign a value to it. During this assignment preemption is
disabled which is not needed because the counter is not yet exposed to
the system so there can not be another writer or reader. Therefore
disabling preemption is omitted and raw_cpu_ptr() is used to obtain a
pointer to a counter for the assignment.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
From cb8aa9a, we can use kernel side filtering for dump, but
this capability is not available for flush.
This Patch allows advanced filter with CTA_FILTER for flush
Performace
1048576 ct flows in total, delete 50,000 flows by origin src ip
3.06s -> dump all, compare and delete
584ms -> directly flush with filter
Signed-off-by: Changliang Wu <changliang.wu@smartx.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add the new gadget function for 9pfs transport. This function is
defining an simple 9pfs transport interface that consists of one in and
one out endpoint. The endpoints transmit and receive the 9pfs protocol
payload when mounting a 9p filesystem over usb.
Tested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240116-ml-topic-u9p-v12-2-9a27de5160e0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-08-30
The first patch is by Duy Nguyen and document the R-Car V4M support in
the rcar-canfd DT bindings.
Frank Li's patch converts the microchip,mcp251x.txt DT bindings
documentation to yaml.
A patch by Zhang Changzhong update a comment in the j1939 CAN
networking stack.
Stefan Mätje's patch updates the CAN configuration netlink code, so
that the bit timing calculation doesn't work on stale
can_priv::ctrlmode data.
Martin Jocic contributes a patch for the kvaser_pciefd driver to
convert some ifdefs into if (IS_ENABLED()).
The last patch is by Yan Zhen and simplifies the probe() function of
the kvaser USB driver by using dev_err_probe().
* tag 'linux-can-next-for-6.12-20240830' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_usb: Simplify with dev_err_probe()
can: kvaser_pciefd: Use IS_ENABLED() instead of #ifdef
can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode
can: j1939: use correct function name in comment
dt-bindings: can: convert microchip,mcp251x.txt to yaml
dt-bindings: can: renesas,rcar-canfd: Document R-Car V4M support
====================
Link: https://patch.msgid.link/20240830214406.1605786-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: If memdump doesn't work, re-enable IBS
- MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
- MGMT: Ignore keys being loaded with invalid type
* tag 'for-net-2024-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Ignore keys being loaded with invalid type
Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"
Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT
Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_once
Bluetooth: qca: If memdump doesn't work, re-enable IBS
====================
Link: https://patch.msgid.link/20240830220300.1316772-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
