summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-02-23net: Implement SFEATURES compatibility for not updated driversMichał Mirosław
Use discrete setting ops for not updated drivers. This will not make them conform to full G/SFEATURES semantics, though. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23net: Fix ETHTOOL_GFEATURES compatibilityMichał Mirosław
Implement getting rx checksum state for not updated drivers. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23net: avoid initial "Features changed" messageMichał Mirosław
Avoid "Features changed" message and ndo_set_features call on device registration caused by automatic enabling of GSO and GRO. Driver should have enabled hardware offloads it set in features, so the ndo_set_features() is not needed at registration time. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23Fix "(unregistered net_device): Features changed" messageMichał Mirosław
Fix netdev_update_features() messages on register time by moving the call further in register_netdevice(). When netdev->reg_state != NETREG_REGISTERED, netdev_name() returns "(unregistered netdevice)" even if the dev's name is already filled. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23em_meta: fix sparse warningstephen hemminger
gfp_t needs to be cast to integer. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23mqprio: cleanupsstephen hemminger
* make qdisc_ops local * add sparse annotation about expected unlock/unlock in dump_class_stats * fix indentation Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23afkey: add sparse annotation about rcustephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23socket: suppress sparse warningsstephen hemminger
Use __force to quiet sparse warnings for cases where the code is simulating user space pointers. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23net_sched: SFB flow schedulerEric Dumazet
This is the Stochastic Fair Blue scheduler, based on work from : W. Feng, D. Kandlur, D. Saha, K. Shin. Blue: A New Class of Active Queue Management Algorithms. U. Michigan CSE-TR-387-99, April 1999. http://www.thefengs.com/wuchang/blue/CSE-TR-387-99.pdf This implementation is based on work done by Juliusz Chroboczek General SFB algorithm can be found in figure 14, page 15: B[l][n] : L x N array of bins (L levels, N bins per level) enqueue() Calculate hash function values h{0}, h{1}, .. h{L-1} Update bins at each level for i = 0 to L - 1 if (B[i][h{i}].qlen > bin_size) B[i][h{i}].p_mark += p_increment; else if (B[i][h{i}].qlen == 0) B[i][h{i}].p_mark -= p_decrement; p_min = min(B[0][h{0}].p_mark ... B[L-1][h{L-1}].p_mark); if (p_min == 1.0) ratelimit(); else mark/drop with probabilty p_min; I did the adaptation of Juliusz code to meet current kernel standards, and various changes to address previous comments : http://thread.gmane.org/gmane.linux.network/90225 http://thread.gmane.org/gmane.linux.network/90375 Default flow classifier is the rxhash introduced by RPS in 2.6.35, but we can use an external flow classifier if wanted. tc qdisc add dev $DEV parent 1:11 handle 11: \ est 0.5sec 2sec sfb limit 128 tc filter add dev $DEV protocol ip parent 11: handle 3 \ flow hash keys dst divisor 1024 Notes: 1) SFB default child qdisc is pfifo_fast. It can be changed by another qdisc but a child qdisc MUST not drop a packet previously queued. This is because SFB needs to handle a dequeued packet in order to maintain its virtual queue states. pfifo_head_drop or CHOKe should not be used. 2) ECN is enabled by default, unlike RED/CHOKe/GRED With help from Patrick McHardy & Andi Kleen Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Juliusz Chroboczek <Juliusz.Chroboczek@pps.jussieu.fr> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Patrick McHardy <kaber@trash.net> CC: Andi Kleen <andi@firstfloor.org> CC: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23mac80211: rename RX_FLAG_TSFTJohannes Berg
The flag isn't very descriptive -- the intention is that the driver provides a TSF timestamp at the beginning of the MPDU -- make that clearer by renaming the flag to RX_FLAG_MACTIME_MPDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-23mac80211: Fix a race on enabling power save.Vivek Natarajan
There is a race on sending a data frame before the tx completion of nullfunc frame for enabling power save. As the data quickly follows the nullfunc frame, the AP thinks that the station is out of power save and continues to send the frames. Whereas in the station, the nullfunc ack will be processed after the tx completion of data frame and mac80211 goes to powersave. Thus the power save state mismatch between the station and the AP causes some data loss and some applications fail because of that. This patch fixes this issue. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-22net: Make flow cache paths use a const struct flowi.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_resolve_and_create_bundle() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_dst_{alloc_copy,update_origin}() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_bundle_create() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_tmpl_resolve{,_one}() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_expand_policies() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_policy_{lookup_by_type,match}() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Kill strict arg to xfrm_bundle_ok().David S. Miller
Always set to "0". Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_state_find() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_init_tempstate() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_state_look_at() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_selector_match() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to xfrm_type->reject() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to ->init_tempsel() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to ->fill_dst() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22xfrm: Mark flowi arg to ->get_tos() const.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-22cls_u32: fix sparse warningsstephen hemminger
The variable _data is used in asm-generic to define sections which causes sparse warnings, so just rename the variable. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-02-22net: add __rcu annotations to sk_wq and wqEric Dumazet
Add proper RCU annotations/verbs to sk_wq and wq members Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access) Fix sunrpc sk_sleep() abuse too Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Use IPv6 link-local address for multicast listener queriesLinus Lüssing
Currently the bridge multicast snooping feature periodically issues IPv6 general multicast listener queries to sense the absence of a listener. For this, it uses :: as its source address - however RFC 2710 requires: "To be valid, the Query message MUST come from a link-local IPv6 Source Address". Current Linux kernel versions seem to follow this requirement and ignore our bogus MLD queries. With this commit a link local address from the bridge interface is being used to issue the MLD query, resulting in other Linux devices which are multicast listeners in the network to respond with a MLD response (which was not the case before). Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix MLD queries' ethernet source addressLinus Lüssing
Map the IPv6 header's destination multicast address to an ethernet source address instead of the MLD queries multicast address. For instance for a general MLD query (multicast address in the MLD query set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although an MLD queries destination MAC should always be 33:33:00:00:00:01 which matches the IPv6 header's multicast destination ff02::1. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Allow mcast snooping for transient link local addresses tooLinus Lüssing
Currently the multicast bridge snooping support is not active for link local multicast. I assume this has been done to leave important multicast data untouched, like IPv6 Neighborhood Discovery. In larger, bridged, local networks it could however be desirable to optimize for instance local multicast audio/video streaming too. With the transient flag in IPv6 multicast addresses we have an easy way to optimize such multimedia traffic without tempering with the high priority multicast data from well-known addresses. This patch alters the multicast bridge snooping for IPv6, to take effect for transient multicast addresses instead of non-link-local addresses. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Add missing ntohs()s for MLDv2 report parsingLinus Lüssing
The nsrcs number is 2 Byte wide, therefore we need to call ntohs() before using it. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 reportLinus Lüssing
We actually want a pointer to the grec_nsrcr and not the following field. Otherwise we can get very high values for *nsrcs as the first two bytes of the IPv6 multicast address are being used instead, leading to a failing pskb_may_pull() which results in MLDv2 reports not being parsed. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22bridge: Fix IPv6 multicast snooping by storing correct protocol typeLinus Lüssing
The protocol type for IPv6 entries in the hash table for multicast bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4 address, instead of setting it to ETH_P_IPV6, which results in negative look-ups in the hash table later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Bluetooth: fix build break on hci_sock.cAnand Gadiyar
Linux-next as of 20110217 complains when building for OMAP1. LD vmlinux `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o `hci_sock_cleanup' referenced in section `.init.text' of net/built-in.o: defined in discarded section `.exit.text' of net/built-in.o make: *** [vmlinux] Error 1 A recent patch by Gustavo (Bluetooth: Merge L2CAP and SCO modules into bluetooth.ko) introduced this by calling the hci_sock_cleanup function in the error path of bt_init. Fix this by dropping the __exit marking for hci_sock_cleanup. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-22HID: bt hidp: send Output reports using SET_REPORT on the Control channelAntonio Ospite
The current implementation of hidp_output_raw_report() relies only on the Control channel even for Output reports, and the BT HID specification [1] does not mention using the DATA message for Output reports on the Control channel (see section 7.9.1 and also Figure 11: SET_ Flow Chart), so let us just use SET_REPORT. This also fixes sending Output reports to some devices (like Sony Sixaxis) which are not able to handle DATA messages on the Control channel. Ideally hidp_output_raw_report() could be improved to use this scheme: Feature Report -- SET_REPORT on the Control channel Output Report -- DATA on the Interrupt channel for more efficiency, but as said above, right now only the Control channel is used. [1] http://www.bluetooth.com/Specification%20Documents/HID_SPEC_V10.pdf Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-02-22ipvs: use hlist instead of listChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2011-02-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: keep reference to parent inode on ceph_dentry ceph: queue cap_snaps once per realm libceph: fix socket write error handling libceph: fix socket read error handling
2011-02-21Bluetooth: Fix LE conn creationAnderson Briglia
This patch prevents a crash when remote host tries to create a LE link which already exists. i.e.: call l2test twice passing the same parameters. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix unnecessary list traversal in mgmt_pending_removeJohan Hedberg
All of the places that need to call mgmt_pending_remove already have a pointer to the pending command, so searching for the command in the list doesn't make sense. The added benefit is that many places that previously had to call list_del + mgmt_pending_free can just call mgmt_pending_remove now. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix inititial value for remote authentication requirementsJohan Hedberg
The remote authentication requirements for conections need to be initialized to 0xff (unknown) since it is possible that we receive a IO Capability Request before we have received information about the remote requirements. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_auth_failed eventJohan Hedberg
To properly track bonding completion an event to indicate authentication failure is needed. This event will be sent whenever an authentication complete HCI event with a non-zero status comes. It will also be sent when we're acting in acceptor role for SSP authentication in which case the controller will send a Simple Pairing Complete event. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply return parametersJohan Hedberg
The command complete event for mgmt_pin_code_reply & mgmt_pin_code_neg_reply should have the adapter index, Bluetooth address as well as the status. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply command status opcodeJohan Hedberg
The opcode for the ENODEV case was wrong (probably copy-paste mistake). Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add management support for user confirmation requestJohan Hedberg
This patch adds support for the user confirmation (numeric comparison) Secure Simple Pairing authentication method. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_pair_device commandJohan Hedberg
This patch adds a new mgmt_pair_device which can be used to initiate a dedicated bonding procedure. Some extra callbacks are added to the hci_conn struct so that the pairing code can get notified of the completion of the procedure. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit (git 2.34.1) at 2025-09-22 15:15:04 +0000