summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2025-02-26tcp: be less liberal in TSEcr received while in SYN_RECV stateEric Dumazet
Yong-Hao Zou mentioned that linux was not strict as other OS in 3WHS, for flows using TCP TS option (RFC 7323) As hinted by an old comment in tcp_check_req(), we can check the TSEcr value in the incoming packet corresponds to one of the SYNACK TSval values we have sent. In this patch, I record the oldest and most recent values that SYNACK packets have used. Send a challenge ACK if we receive a TSEcr outside of this range, and increase a new SNMP counter. nstat -az | grep TSEcrRejected TcpExtTSEcrRejected 0 0.0 Due to TCP fastopen implementation, do not apply yet these checks for fastopen flows. v2: No longer use req->num_timeout, but treq->snt_tsval_first to detect when first SYNACK is prepared. This means we make sure to not send an initial zero TSval. Make sure MPTCP and TCP selftests are passing. Change MIB name to TcpExtTSEcrRejected v1: https://lore.kernel.org/netdev/CADVnQykD8i4ArpSZaPKaoNxLJ2if2ts9m4As+=Jvdkrgx1qMHw@mail.gmail.com/T/ Reported-by: Yong-Hao Zou <yonghaoz1994@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250225171048.3105061-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().Kuniyuki Iwashima
Breno Leitao reported the splat below. [0] Commit 65161fb544aa ("net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().") added the DEBUG_NET_WARN_ON_ONCE(), assuming that the netdev is not registered before register_netdevice_notifier_dev_net(). But the assumption was simply wrong. Let's use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net(). [0]: WARNING: CPU: 25 PID: 849 at net/core/dev.c:2150 register_netdevice_notifier_dev_net (net/core/dev.c:2150) <TASK> ? __warn (kernel/panic.c:242 kernel/panic.c:748) ? register_netdevice_notifier_dev_net (net/core/dev.c:2150) ? register_netdevice_notifier_dev_net (net/core/dev.c:2150) ? report_bug (lib/bug.c:? lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? register_netdevice_notifier_dev_net (net/core/dev.c:2150) ? register_netdevice_notifier_dev_net (./include/net/net_namespace.h:406 ./include/linux/netdevice.h:2663 net/core/dev.c:2144) mlx5e_mdev_notifier_event+0x9f/0xf0 mlx5_ib notifier_call_chain.llvm.12241336988804114627 (kernel/notifier.c:85) blocking_notifier_call_chain (kernel/notifier.c:380) mlx5_core_uplink_netdev_event_replay (drivers/net/ethernet/mellanox/mlx5/core/main.c:352) mlx5_ib_roce_init.llvm.12447516292400117075+0x1c6/0x550 mlx5_ib mlx5r_probe+0x375/0x6a0 mlx5_ib ? kernfs_put (./include/linux/instrumented.h:96 ./include/linux/atomic/atomic-arch-fallback.h:2278 ./include/linux/atomic/atomic-instrumented.h:1384 fs/kernfs/dir.c:557) ? auxiliary_match_id (drivers/base/auxiliary.c:174) ? mlx5r_mp_remove+0x160/0x160 mlx5_ib really_probe (drivers/base/dd.c:? drivers/base/dd.c:658) driver_probe_device (drivers/base/dd.c:830) __driver_attach (drivers/base/dd.c:1217) bus_for_each_dev (drivers/base/bus.c:369) ? driver_attach (drivers/base/dd.c:1157) bus_add_driver (drivers/base/bus.c:679) driver_register (drivers/base/driver.c:249) Fixes: 7fb1073300a2 ("net: Hold rtnl_net_lock() in (un)?register_netdevice_notifier_dev_net().") Reported-by: Breno Leitao <leitao@debian.org> Closes: https://lore.kernel.org/netdev/20250224-noisy-cordial-roadrunner-fad40c@leitao/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250225211023.96448-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-26Merge tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: "Stable Fixes: - O_DIRECT writes should adjust file length Other Bugfixes: - Adjust delegated timestamps for O_DIRECT reads and writes - Prevent looping due to rpc_signal_task() races - Fix a deadlock when recovering state on a sillyrenamed file - Properly handle -ETIMEDOUT errors from tlshd - Suppress build warnings for unused procfs functions - Fix memory leak of lsm_contexts" * tag 'nfs-for-6.14-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: lsm,nfs: fix memory leak of lsm_context sunrpc: suppress warnings for unused procfs functions SUNRPC: Handle -ETIMEDOUT return from tlshd NFSv4: Fix a deadlock when recovering state on a sillyrenamed file SUNRPC: Prevent looping due to rpc_signal_task() races NFS: Adjust delegated timestamps for O_DIRECT reads and writes NFS: O_DIRECT writes must check and adjust the file length
2025-02-26tcp: Defer ts_recent changes until req is ownedWang Hai
Recently a bug was discovered where the server had entered TCP_ESTABLISHED state, but the upper layers were not notified. The same 5-tuple packet may be processed by different CPUSs, so two CPUs may receive different ack packets at the same time when the state is TCP_NEW_SYN_RECV. In that case, req->ts_recent in tcp_check_req may be changed concurrently, which will probably cause the newsk's ts_recent to be incorrectly large. So that tcp_validate_incoming will fail. At this point, newsk will not be able to enter the TCP_ESTABLISHED. cpu1 cpu2 tcp_check_req tcp_check_req req->ts_recent = rcv_tsval = t1 req->ts_recent = rcv_tsval = t2 syn_recv_sock tcp_sk(child)->rx_opt.ts_recent = req->ts_recent = t2 // t1 < t2 tcp_child_process tcp_rcv_state_process tcp_validate_incoming tcp_paws_check if ((s32)(rx_opt->ts_recent - rx_opt->rcv_tsval) <= paws_win) // t2 - t1 > paws_win, failed tcp_v4_do_rcv tcp_rcv_state_process // TCP_ESTABLISHED The cpu2's skb or a newly received skb will call tcp_v4_do_rcv to get the newsk into the TCP_ESTABLISHED state, but at this point it is no longer possible to notify the upper layer application. A notification mechanism could be added here, but the fix is more complex, so the current fix is used. In tcp_check_req, req->ts_recent is used to assign a value to tcp_sk(child)->rx_opt.ts_recent, so removing the change in req->ts_recent and changing tcp_sk(child)->rx_opt.ts_recent directly after owning the req fixes this bug. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-25mptcp: safety check before fallbackMatthieu Baerts (NGI0)
Recently, some fallback have been initiated, while the connection was not supposed to fallback. Add a safety check with a warning to detect when an wrong attempt to fallback is being done. This should help detecting any future issues quicker. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-3-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25mptcp: reset when MPTCP opts are dropped after joinMatthieu Baerts (NGI0)
Before this patch, if the checksum was not used, the subflow was only reset if map_data_len was != 0. If there were no MPTCP options or an invalid mapping, map_data_len was not set to the data len, and then the subflow was not reset as it should have been, leaving the MPTCP connection in a wrong fallback mode. This map_data_len condition has been introduced to handle the reception of the infinite mapping. Instead, a new dedicated mapping error could have been returned and treated as a special case. However, the commit 31bf11de146c ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced by Paolo Abeni soon after, and backported later on to stable. It better handle the csum case, and it means the exception for valid_csum_seen in subflow_can_fallback(), plus this one for the infinite mapping in subflow_check_data_avail(), are no longer needed. In other words, the code can be simplified there: a fallback should only be done if msk->allow_infinite_fallback is set. This boolean is set to false once MPTCP-specific operations acting on the whole MPTCP connection vs the initial path have been done, e.g. a second path has been created, or an MPTCP re-injection -- yes, possible even with a single subflow. The subflow_can_fallback() helper can then be dropped, and replaced by this single condition. This also makes the code clearer: a fallback should only be done if it is possible to do so. While at it, no need to set map_data_len to 0 in get_mapping_status() for the infinite mapping case: it will be set to skb->len just after, at the end of subflow_check_data_avail(), and not read in between. Fixes: f8d4bcacff3b ("mptcp: infinite mapping receiving") Cc: stable@vger.kernel.org Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25mptcp: always handle address removal under msk socket lockPaolo Abeni
Syzkaller reported a lockdep splat in the PM control path: WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline] WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Modules linked in: CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024 RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline] RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline] RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788 Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283 RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408 RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000 R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0 R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00 FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59 mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486 mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline] mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:733 ____sys_sendmsg+0x53a/0x860 net/socket.c:2573 ___sys_sendmsg net/socket.c:2627 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2659 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7e9998cde9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9 RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007 RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088 Indeed the PM can try to send a RM_ADDR over a msk without acquiring first the msk socket lock. The bugged code-path comes from an early optimization: when there are no subflows, the PM should (usually) not send RM_ADDR notifications. The above statement is incorrect, as without locks another process could concurrent create a new subflow and cause the RM_ADDR generation. Additionally the supposed optimization is not very effective even performance-wise, as most mptcp sockets should have at least one subflow: the MPC one. Address the issue removing the buggy code path, the existing "slow-path" will handle correctly even the edge case. Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink") Cc: stable@vger.kernel.org Reported-by: syzbot+cd3ce3d03a3393ae9700@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/546 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-1-f550f636b435@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25ethtool: Symmetric OR-XOR RSS hashGal Pressman
Add an additional type of symmetric RSS hash type: OR-XOR. The "Symmetric-OR-XOR" algorithm transforms the input as follows: (SRC_IP | DST_IP, SRC_IP ^ DST_IP, SRC_PORT | DST_PORT, SRC_PORT ^ DST_PORT) Change 'cap_rss_sym_xor_supported' to 'supported_input_xfrm', a bitmap of supported RXH_XFRM_* types. Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20250224174416.499070-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25tcp: devmem: don't write truncated dmabuf CMSGs to userspaceStanislav Fomichev
Currently, we report -ETOOSMALL (err) only on the first iteration (!sent). When we get put_cmsg error after a bunch of successful put_cmsg calls, we don't signal the error at all. This might be confusing on the userspace side which will see truncated CMSGs but no MSG_CTRUNC signal. Consider the following case: - sizeof(struct cmsghdr) = 16 - sizeof(struct dmabuf_cmsg) = 24 - total cmsg size (CMSG_LEN) = 40 (16+24) When calling recvmsg with msg_controllen=60, the userspace will receive two(!) dmabuf_cmsg(s), the first one will be a valid one and the second one will be silently truncated. There is no easy way to discover the truncation besides doing something like "cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))". Introduce new put_devmem_cmsg wrapper that reports an error instead of doing the truncation. Mina suggests that it's the intended way this API should work. Note that we might now report MSG_CTRUNC when the users (incorrectly) call us with msg_control == NULL. Fixes: 8f0b3cc9a4c1 ("tcp: RX path for devmem TCP") Reviewed-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-25sunrpc: suppress warnings for unused procfs functionsArnd Bergmann
There is a warning about unused variables when building with W=1 and no procfs: net/sunrpc/cache.c:1660:30: error: 'cache_flush_proc_ops' defined but not used [-Werror=unused-const-variable=] 1660 | static const struct proc_ops cache_flush_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1622:30: error: 'content_proc_ops' defined but not used [-Werror=unused-const-variable=] 1622 | static const struct proc_ops content_proc_ops = { | ^~~~~~~~~~~~~~~~ net/sunrpc/cache.c:1598:30: error: 'cache_channel_proc_ops' defined but not used [-Werror=unused-const-variable=] 1598 | static const struct proc_ops cache_channel_proc_ops = { | ^~~~~~~~~~~~~~~~~~~~~~ These are used inside of an #ifdef, so replacing that with an IS_ENABLED() check lets the compiler see how they are used while still dropping them during dead code elimination. Fixes: dbf847ecb631 ("knfsd: allow cache_register to return error on failure") Reviewed-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-02-25ipvs: Always clear ipvs_property flag in skb_scrub_packet()Philo Lu
We found an issue when using bpf_redirect with ipvs NAT mode after commit ff70202b2d1a ("dev_forward_skb: do not scrub skb mark within the same name space"). Particularly, we use bpf_redirect to return the skb directly back to the netif it comes from, i.e., xnet is false in skb_scrub_packet(), and then ipvs_property is preserved and SNAT is skipped in the rx path. ipvs_property has been already cleared when netns is changed in commit 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed"). This patch just clears it in spite of netns. Fixes: 2b5ec1a5f973 ("netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed") Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Julian Anastasov <ja@ssi.bg> Link: https://patch.msgid.link/20250222033518.126087-1-lulie@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-24mptcp: blackhole: avoid checking the state twiceMatthieu Baerts (NGI0)
A small cleanup, reordering the conditions to avoid checking things twice. The code here is called in case of timeout on a TCP connection, before triggering a retransmission. But it only acts on SYN + MPC packets. So the conditions can be re-order to exit early in case of non-MPTCP SYN + MPC. This also reduce the indentation levels. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-10-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: sched: reduce size for unused dataMatthieu Baerts (NGI0)
Thanks for the previous commit ("mptcp: sched: split get_subflow interface into two"), the mptcp_sched_data structure is now currently unused. This structure has been added to allow future extensions that are not ready yet. At the end, this structure will not even be used at all when mptcp_subflow bpf_iter will be supported [1]. Here is a first step to save 64 bytes on the stack for each scheduling operation. The structure is not removed yet not to break the WIP work on these extensions, but will be done when [1] will be ready and applied. Link: https://lore.kernel.org/6645ad6e-8874-44c5-8730-854c30673218@linux.dev [1] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-9-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: sched: split get_subflow interface into twoGeliang Tang
get_retrans() interface of the burst packet scheduler invokes a sleeping function mptcp_pm_subflow_chk_stale(), which calls __lock_sock_fast(). So get_retrans() interface should be set with BPF_F_SLEEPABLE flag in BPF. But get_send() interface of this scheduler can't be set with BPF_F_SLEEPABLE flag since it's invoked in ack_update_msk() under mptcp data lock. So this patch has to split get_subflow() interface of packet scheduer into two interfaces: get_send() and get_retrans(). Then we can set get_retrans() interface alone with BPF_F_SLEEPABLE flag. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-8-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: use ipv6_addr_equal in addresses_equalGeliang Tang
Use ipv6_addr_equal() to check whether two IPv6 addresses are equal in mptcp_addresses_equal(). This is more appropriate than using !ipv6_addr_cmp(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-7-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: drop inet6_sk after inet_skGeliang Tang
In mptcp_event_add_subflow(), mptcp_event_pm_listener() and mptcp_nl_find_ssk(), 'issk' has already been got through inet_sk(). No need to use inet6_sk() to get 'ipv6_pinfo' again, just use issk->pinet6 instead. This patch also drops these 'ipv6_pinfo' variables. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-6-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: drop match in userspace_pm_append_new_local_addrGeliang Tang
The variable 'match' in mptcp_userspace_pm_append_new_local_addr() is a redundant one, and this patch drops it. No need to define 'match' as 'struct mptcp_pm_addr_entry *' type. In this function, it's only used to check whether it's NULL. It can be defined as a Boolean one. Also other variables 'addr_match' and 'id_match' make 'match' a redundant one, which can be replaced by directly checking 'addr_match && id_match'. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-5-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: add mptcp_pm_genl_fill_addr helperGeliang Tang
To save some redundant code in dump_addr() interfaces of both the netlink PM and userspace PM, the code that calls netlink message helpers (genlmsg_put/cancel/end) and mptcp_nl_fill_addr() is wrapped into a new helper mptcp_pm_genl_fill_addr(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-4-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: add a build check for userspace_pm_dump_addrGeliang Tang
This patch adds a build check for mptcp_userspace_pm_dump_addr() to make sure there is enough space in 'cb->ctx' to store an address id bitmap. Just in case info stored in 'cb->ctx' are increased later. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-3-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: change to fullmesh only for 'subflow'Matthieu Baerts (NGI0)
If an endpoint doesn't have the 'subflow' flag -- in fact, has no type, so not 'subflow', 'signal', nor 'implicit' -- there are then no subflows created from this local endpoint to at least the initial destination address. In this case, no need to call mptcp_pm_nl_fullmesh() which is there to recreate the subflows to reflect the new value of the fullmesh attribute. Similarly, there is then no need to iterate over all connections to do nothing, if only the 'fullmesh' flag has been changed, and the endpoint doesn't have the 'subflow' one. So stop early when dealing with this specific case. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-2-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24mptcp: pm: remove unused ret value to set flagsMatthieu Baerts (NGI0)
The returned value is not used, it can then be dropped. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250221-net-next-mptcp-pm-misc-cleanup-3-v1-1-2b70ab1cee79@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24net: Remove shadow variable in netdev_run_todo()Breno Leitao
Fix a shadow variable warning in net/core/dev.c when compiled with CONFIG_LOCKDEP enabled. The warning occurs because 'dev' is redeclared inside the while loop, shadowing the outer scope declaration. net/core/dev.c:11211:22: warning: declaration shadows a local variable [-Wshadow] struct net_device *dev = list_first_entry(&unlink_list, net/core/dev.c:11202:21: note: previous declaration is here struct net_device *dev, *tmp; Remove the redundant declaration since the variable is already defined in the outer scope and will be overwritten in the subsequent list_for_each_entry_safe() loop anyway. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250221-netcons_fix_shadow-v1-1-dee20c8658dd@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24net: remove '__' from __skb_flow_get_ports()Nicolas Dichtel
Only one version of skb_flow_get_ports() exists after the previous commit, so let's remove the useless '__'. Suggested-by: Simon Horman <horms@kernel.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://patch.msgid.link/20250221110941.2041629-3-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24net-sysfs: restore behavior for not running devicesEric Dumazet
modprobe dummy dumdummies=1 Old behavior : $ cat /sys/class/net/dummy0/carrier cat: /sys/class/net/dummy0/carrier: Invalid argument After blamed commit, an empty string is reported. $ cat /sys/class/net/dummy0/carrier $ In this commit, I restore the old behavior for carrier, speed and duplex attributes. Fixes: 79c61899b5ee ("net-sysfs: remove rtnl_trylock from device attributes") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Marco Leogrande <leogrande@google.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://patch.msgid.link/20250221051223.576726-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-24net: ethtool: fix ioctl confusing drivers about desired HDS user configJakub Kicinski
The legacy ioctl path does not have support for extended attributes. So we issue a GET to fetch the current settings from the driver, in an attempt to keep them unchanged. HDS is a bit "special" as the GET only returns on/off while the SET takes a "ternary" argument (on/off/default). If the driver was in the "default" setting - executing the ioctl path binds it to on or off, even tho the user did not intend to change HDS config. Factor the relevant logic out of the netlink code and reuse it. Fixes: 87c8f8496a05 ("bnxt_en: add support for tcp-data-split ethtool command") Acked-by: Stanislav Fomichev <sdf@fomichev.me> Tested-by: Daniel Xu <dxu@dxuuu.xyz> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250221025141.1132944-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: set the minimum for net_hotdata.netdev_budget_usecsJiri Slaby (SUSE)
Commit 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") added a possibility to set net_hotdata.netdev_budget_usecs, but added no lower bound checking. Commit a4837980fd9f ("net: revert default NAPI poll timeout to 2 jiffies") made the *initial* value HZ-dependent, so the initial value is at least 2 jiffies even for lower HZ values (2 ms for 1000 Hz, 8ms for 250 Hz, 20 ms for 100 Hz). But a user still can set improper values by a sysctl. Set .extra1 (the lower bound) for net_hotdata.netdev_budget_usecs to the same value as in the latter commit. That is to 2 jiffies. Fixes: a4837980fd9f ("net: revert default NAPI poll timeout to 2 jiffies") Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning") Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Dmitry Yakunin <zeil@yandex-team.ru> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Link: https://patch.msgid.link/20250220110752.137639-1-jirislaby@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: fib_rules: Enable DSCP mask usageIdo Schimmel
Allow user space to configure FIB rules that match on DSCP with a mask, now that support has been added to the IPv4 and IPv6 address families. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ipv6: fib_rules: Add DSCP mask matchingIdo Schimmel
Extend IPv6 FIB rules to match on DSCP using a mask. Unlike IPv4, also initialize the DSCP mask when a non-zero 'tos' is specified as there is no difference in matching between 'tos' and 'dscp'. As a side effect, this makes it possible to match on 'dscp 0', like in IPv4. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ipv4: fib_rules: Add DSCP mask matchingIdo Schimmel
Extend IPv4 FIB rules to match on DSCP using a mask. The mask is only set in rules that match on DSCP (not TOS) and initialized to cover the entire DSCP field if the mask attribute is not specified. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: fib_rules: Add DSCP mask attributeIdo Schimmel
Add an attribute that allows matching on DSCP with a mask. Matching on DSCP with a mask is needed in deployments where users encode path information into certain bits of the DSCP field. Temporarily set the type of the attribute to 'NLA_REJECT' while support is being added. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/20250220080525.831924-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: better track kernel sockets lifetimeEric Dumazet
While kernel sockets are dismantled during pernet_operations->exit(), their freeing can be delayed by any tx packets still held in qdisc or device queues, due to skb_set_owner_w() prior calls. This then trigger the following warning from ref_tracker_dir_exit() [1] To fix this, make sure that kernel sockets own a reference on net->passive. Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket is converted to a refcounted one. [1] [ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.263918][ T35] sk_alloc+0x2b3/0x370 [ 136.263918][ T35] inet6_create+0x6ce/0x10f0 [ 136.263918][ T35] __sock_create+0x4c0/0xa30 [ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.263918][ T35] igmp6_net_init+0x39/0x390 [ 136.263918][ T35] ops_init+0x31e/0x590 [ 136.263918][ T35] setup_net+0x287/0x9e0 [ 136.263918][ T35] copy_net_ns+0x33f/0x570 [ 136.263918][ T35] create_new_namespaces+0x425/0x7b0 [ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.263918][ T35] ksys_unshare+0x57d/0xa70 [ 136.263918][ T35] __x64_sys_unshare+0x38/0x40 [ 136.263918][ T35] do_syscall_64+0xf3/0x230 [ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 136.263918][ T35] [ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at [ 136.343488][ T35] sk_alloc+0x2b3/0x370 [ 136.343488][ T35] inet6_create+0x6ce/0x10f0 [ 136.343488][ T35] __sock_create+0x4c0/0xa30 [ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250 [ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0 [ 136.343488][ T35] ops_init+0x31e/0x590 [ 136.343488][ T35] setup_net+0x287/0x9e0 [ 136.343488][ T35] copy_net_ns+0x33f/0x570 [ 136.343488][ T35] create_new_namespaces+0x425/0x7b0 [ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180 [ 136.343488][ T35] ksys_unshare+0x57d/0xa70 [ 136.343488][ T35] __x64_sys_unshare+0x38/0x40 [ 136.343488][ T35] do_syscall_64+0xf3/0x230 [ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 0cafd77dcd03 ("net: add a refcount tracker for kernel sockets") Reported-by: syzbot+30a19e01a97420719891@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/67b72aeb.050a0220.14d86d.0283.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250220131854.4048077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Martin KaFai Lau says: ==================== pull-request: bpf-next 2025-02-20 We've added 19 non-merge commits during the last 8 day(s) which contain a total of 35 files changed, 1126 insertions(+), 53 deletions(-). The main changes are: 1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing 2) Add network TX timestamping support to BPF sock_ops, from Jason Xing 3) Add TX metadata Launch Time support, from Song Yoong Siang * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: igc: Add launch time support to XDP ZC igc: Refactor empty frame insertion for launch time support net: stmmac: Add launch time support to XDP ZC selftests/bpf: Add launch time request to xdp_hw_metadata xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add simple bpf tests in the tx path for timestamping feature bpf: Support selective sampling for bpf timestamping bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING bpf: Disable unsafe helpers in TX timestamping callbacks bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping bpf: Add networking timestamping support to bpf_get/setsockopt() selftests/bpf: Add rto max for bpf_setsockopt test bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt ==================== Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21Merge tag 'for-net-2025-02-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btusb: Always allow SCO packets for user channel - L2CAP: Fix L2CAP_ECRED_CONN_RSP response * tag 'for-net-2025-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: L2CAP: Fix L2CAP_ECRED_CONN_RSP response Bluetooth: Always allow SCO packets for user channel ==================== Link: https://patch.msgid.link/20250221154941.2139043-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net/rds: Replace deprecated strncpy() with strscpy_pad()Thorsten Blum
strncpy() is deprecated for NUL-terminated destination buffers. Use strscpy_pad() instead and remove the manual NUL-termination. Compile-tested only. Link: https://github.com/KSPP/linux/issues/90 Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Tested-by: Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20250219224730.73093-2-thorsten.blum@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Create link directly in target net namespaceXiao Liang
Make rtnl_newlink_create() create device in target namespace directly. Avoid extra netns change when link netns is provided. Device drivers has been converted to be aware of link netns, that is not assuming device netns is and link netns is the same when ops->newlink() is called. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-12-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Remove "net" from newlink paramsXiao Liang
Now that devices have been converted to use the specific netns instead of ambiguous "net", let's remove it from newlink parameters. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-11-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: xfrm: Use link netns in newlink() of rtnl_link_opsXiao Liang
When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-10-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ipv6: Use link netns in newlink() of rtnl_link_opsXiao Liang
When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-9-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ipv6: Init tunnel link-netns before registering devXiao Liang
Currently some IPv6 tunnel drivers set tnl->net to dev_net(dev) in ndo_init(), which is called in register_netdevice(). However, it lacks the context of link-netns when we enable cross-net tunnels at device registration time. Let's move the init of tunnel link-netns before register_netdevice(). ip6_gre has already initialized netns, so just remove the redundant assignment. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-8-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ip_tunnel: Use link netns in newlink() of rtnl_link_opsXiao Liang
When link_net is set, use it as link netns instead of dev_net(). This prepares for rtnetlink core to create device in target netns directly, in which case the two namespaces may be different. Convert common ip_tunnel_newlink() to accept an extra link netns argument. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-7-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: ip_tunnel: Don't set tunnel->net in ip_tunnel_init()Xiao Liang
ip_tunnel_init() is called from register_netdevice(). In all code paths reaching here, tunnel->net should already have been set (either in ip_tunnel_newlink() or __ip_tunnel_create()). So don't set it again. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-6-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21ieee802154: 6lowpan: Validate link netns in newlink() of rtnl_link_opsXiao Liang
Device denoted by IFLA_LINK is in link_net (IFLA_LINK_NETNSID) or source netns by design, but 6lowpan uses dev_net. Note dev->netns_local is set to true and currently link_net is implemented via a netns change. These together effectively reject IFLA_LINK_NETNSID. This patch adds a validation to ensure link_net is either NULL or identical to dev_net. Thus it would be fine to continue using dev_net when rtnetlink core begins to create devices directly in target netns. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-5-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21net: Use link/peer netns in newlink() of rtnl_link_opsXiao Liang
Add two helper functions - rtnl_newlink_link_net() and rtnl_newlink_peer_net() for netns fallback logic. Peer netns falls back to link netns, and link netns falls back to source netns. Convert the use of params->net in netdevice drivers to one of the helper functions for clarity. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-4-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Pack newlink() params into structXiao Liang
There are 4 net namespaces involved when creating links: - source netns - where the netlink socket resides, - target netns - where to put the device being created, - link netns - netns associated with the device (backend), - peer netns - netns of peer device. Currently, two nets are passed to newlink() callback - "src_net" parameter and "dev_net" (implicitly in net_device). They are set as follows, depending on netlink attributes in the request. +------------+-------------------+---------+---------+ | peer netns | IFLA_LINK_NETNSID | src_net | dev_net | +------------+-------------------+---------+---------+ | | absent | source | target | | absent +-------------------+---------+---------+ | | present | link | link | +------------+-------------------+---------+---------+ | | absent | peer | target | | present +-------------------+---------+---------+ | | present | peer | link | +------------+-------------------+---------+---------+ When IFLA_LINK_NETNSID is present, the device is created in link netns first and then moved to target netns. This has some side effects, including extra ifindex allocation, ifname validation and link events. These could be avoided if we create it in target netns from the beginning. On the other hand, the meaning of src_net parameter is ambiguous. It varies depending on how parameters are passed. It is the effective link (or peer netns) by design, but some drivers ignore it and use dev_net instead. To provide more netns context for drivers, this patch packs existing newlink() parameters, along with the source netns, link netns and peer netns, into a struct. The old "src_net" is renamed to "net" to avoid confusion with real source netns, and will be deprecated later. The use of src_net are converted to params->net trivially. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rtnetlink: Lookup device in target netns when creating linkXiao Liang
When creating link, lookup for existing device in target net namespace instead of current one. For example, two links created by: # ip link add dummy1 type dummy # ip link add netns ns1 dummy1 type dummy should have no conflict since they are in different namespaces. Signed-off-by: Xiao Liang <shaw.leon@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20250219125039.18024-2-shaw.leon@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rxrpc: Fix locking issues with the peer record hashDavid Howells
rxrpc_new_incoming_peer() can't use spin_lock_bh() whilst its caller has interrupts disabled. WARNING: CPU: 0 PID: 1550 at kernel/softirq.c:369 __local_bh_enable_ip+0x46/0xd0 ... Call Trace: rxrpc_alloc_incoming_call+0x1b0/0x400 rxrpc_new_incoming_call+0x1dd/0x5e0 rxrpc_input_packet+0x84a/0x920 rxrpc_io_thread+0x40d/0xb40 kthread+0x2ec/0x300 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 1811 hardirqs last enabled at (1809): _raw_spin_unlock_irq+0x24/0x50 hardirqs last disabled at (1810): _raw_read_lock_irq+0x17/0x70 softirqs last enabled at (1182): handle_softirqs+0x3ee/0x430 softirqs last disabled at (1811): rxrpc_new_incoming_peer+0x56/0x120 Fix this by using a plain spin_lock() instead. IRQs are held, so softirqs can't happen. Fixes: a2ea9a907260 ("rxrpc: Use irq-disabling spinlocks between app and I/O thread") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-4-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rxrpc: peer->mtu_lock is redundantDavid Howells
The peer->mtu_lock is only used to lock around writes to peer->max_data - and nothing else; further, all such writes take place in the I/O thread and the lock is only ever write-locked and never read-locked. In a couple of places, the write_seqcount_begin() is wrapped in preempt_disable/enable(), but not in all places. This can cause lockdep to complain: WARNING: CPU: 0 PID: 1549 at include/linux/seqlock.h:221 rxrpc_input_ack_trailer+0x305/0x430 ... RIP: 0010:rxrpc_input_ack_trailer+0x305/0x430 Fix this by just getting rid of the lock. Fixes: eeaedc5449d9 ("rxrpc: Implement path-MTU probing using padded PING ACKs (RFC8899)") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21rxrpc: rxperf: Fix missing decoding of terminal magic cookieDavid Howells
The rxperf RPCs seem to have a magic cookie at the end of the request that was failing to be taken account of by the unmarshalling of the request. Fix the rxperf code to expect this. Fixes: 75bfdbf2fca3 ("rxrpc: Implement an in-kernel rxperf server for testing purposes") Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Simon Horman <horms@kernel.org> cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250218192250.296870-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20neighbour: Replace kvzalloc() with kzalloc() when GFP_ATOMIC is specifiedKohei Enju
kzalloc() uses page allocator when size is larger than KMALLOC_MAX_CACHE_SIZE, so the intention of commit ab101c553bc1 ("neighbour: use kvzalloc()/kvfree()") can be achieved by using kzalloc(). When using GFP_ATOMIC, kvzalloc() only tries the kmalloc path, since the vmalloc path does not support the flag. In this case, kvzalloc() is equivalent to kzalloc() in that neither try the vmalloc path, so this replacement brings no functional change. This is primarily a cleanup change, as the original code functions correctly. This patch replaces kvzalloc() introduced by commit 41b3caa7c076 ("neighbour: Add hlist_node to struct neighbour"), which is called in the same context and with the same gfp flag as the aforementioned commit ab101c553bc1 ("neighbour: use kvzalloc()/kvfree()"). Signed-off-by: Kohei Enju <enjuk@amazon.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Link: https://patch.msgid.link/20250219102227.72488-1-enjuk@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20net: pktgen: fix access outside of user given buffer in pktgen_thread_write()Peter Seiderer
Honour the user given buffer size for the strn_len() calls (otherwise strn_len() will access memory outside of the user given buffer). Signed-off-by: Peter Seiderer <ps.report@gmx.net> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250219084527.20488-8-ps.report@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 14:21:36 +0000