summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-06-08tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open sideJerry Chu
This patch lowers the default initRTO from 3secs to 1sec per RFC2988bis. It falls back to 3secs if the SYN or SYN-ACK packet has been retransmitted, AND the TCP timestamp option is not on. It also adds support to take RTT sample during 3WHS on the passive open side, just like its active open counterpart, and uses it, if valid, to seed the initRTO for the data transmission phase. The patch also resets ssthresh to its initial default at the beginning of the data transmission phase, and reduces cwnd to 1 if there has been MORE THAN ONE retransmission during 3WHS per RFC5681. Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08ipv6: generate link local address for GRE tunnelstephen hemminger
Use same logic as SIT tunnel to handle link local address for GRE tunnel. OSPFv3 requires link-local address to function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08v2 ethtool: remove support for ETHTOOL_GRXNTUPLEAlexander Duyck
This change is meant to remove all support for displaying an ntuple as strings via ETHTOOL_GRXNTUPLE. The reason for this change is due to the fact that multiple issues have been found including: - Multiple buffer overruns for strings being displayed. - Incorrect filters displayed, cleared filters with ring of -2 are displayed - Setting get_rx_ntuple displays no rules if defined. - Endianess wrong on displayed values. - Hard limit of 1024 filters makes display functionality extremely limited The only driver that had supported this interface was ixgbe. Since it no longer uses the interface and due to the issues mentioned above I am submitting this patch to remove it. v2: Updated based on comments from Ben Hutchings - Left ETH_SS_NTUPLE_FILTERS in code but commented on it being deprecated - Removed ethtool_rx_ntuple_list and ethtool_rx_ntuple_flow_spec_container - Left ETHTOOL_GRXNTUPLE but commented it as deprecated Also cleaned up set_rx_ntuple since there is no flow spec container to maintain we can drop all the code for the alloc and free of it and just return ops->set_rx_ntuple(). Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-08Bluetooth: Fix check for the ERTM local busy stateMat Martineau
Local busy is encoded in a bitfield, but was not masked out correctly. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Restore accidentally-deleted lineMat Martineau
When code was moved from l2cap_core.c to l2cap_sock.c in commit 6de0702b5b93da0ef097aa092b4597fbc024ebba, one line was dropped from the old __l2cap_sock_close() implementation. This sk_state change should still be in l2cap_chan_close(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Simplify hci_conn_accept_secure checkWaldemar Rymarkiewicz
If the link key is secure (authenticated or combination 16 digit) the sec_level will be always BT_SECURITY_HIGH. Therefore, instead of checking the link key type simply check the sec_level on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add BT_POWER L2CAP socket option.Jaikumar Ganesh
Add BT_POWER socket option used to control the power characteristics of the underlying ACL link. When the remote end has put the link in sniff mode and the host stack wants to send data we need need to explicitly exit sniff mode to work well with certain devices (For example, A2DP on Plantronics Voyager 855). However, this causes problems with HID devices. Hence, moving into active mode when sending data, irrespective of who set the sniff mode has been made as a socket option. By default, we will move into active mode. HID devices can set the L2CAP socket option to prevent this from happening. Currently, this has been implemented for L2CAP sockets. This has been tested with incoming and outgoing L2CAP sockets for HID and A2DP. Based on discussions on linux-bluetooth and patches submitted by Andrei Emeltchenko. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Verify a pin code in pin_code_replyWaldemar Rymarkiewicz
As we cannot relay on a userspace mgmt api implementation we should verify if pin_code_reply in fact contains the secure pin code. If userspace replied with unsecure pincode when secure was required we will send pin_code_neg_reply to the controller. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove a magic numberWaldemar Rymarkiewicz
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix sparse & gcc warningsJohannes Berg
sparse complains about a few things that should be static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Set 'peer_addr_type' in hci_le_connect()Andre Guedes
Set the 'peer_addr_type' field of the LE Create Connection command sent in hci_le_connect(). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Check advertising cache in hci_connect()Andre Guedes
When connecting to a LE device, we need to check the advertising cache in order to know the address type of that device. If its advertising entry is not found, the connection is not established and hci_connect() returns error. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove useless check in hci_connect()Andre Guedes
There is no need to check the connection's state since hci_conn_add() has just created a new connection and its state has been set properly. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add 'dst_type' field to struct hci_connAndre Guedes
This patch adds a new field (dst_type) to the struct hci_conn which holds the type of the destination address (bdaddr_t dst). This approach is needed in order to use the struct hci_conn as an abstraction of LE connections in HCI Layer. For non-LE this field is ignored. This patch also set properly the 'dst_type' field after initializing LE hci_conn structures. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Refactor hci_auth_complete_evt functionWaldemar Rymarkiewicz
Replace if(conn) with if(!conn) checking to avoid too many nested statements Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Fix auth_complete_evt for legacy unitsWaldemar Rymarkiewicz
Legacy devices don't re-authenticate the link properly if a link key already exists. Thus, don't update sec_level for this case even if hci_auth_complete_evt indicates success. Otherwise the sec_level will not reflect a real security on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Advertising entries lifetimeAndre Guedes
This patch adds a timer to clear 'adv_entries' after three minutes. After some amount of time, the advertising entries cached during the last LE scan should be considered expired and they should be removed from the advertising cache. It was chosen a three minutes timeout as an initial attempt. This value might change in future. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Clear advertising cache before scanningAndre Guedes
The LE advertising cache should be cleared before performing a LE scanning. This will force the cache to contain only fresh advertising entries. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add Advertising Report Meta Event handlerAndre Guedes
This patch adds a function to handle LE Advertising Report Meta Events. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: LE advertising cacheAndre Guedes
This patch implements the LE advertising cache. It stores sensitive information (bdaddr and bdaddr_type so far) gathered from LE advertising report events. Only advertising entries from connectables devices are added to the cache. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Rename __l2cap_chan_close() to l2cap_chan_close()Gustavo F. Padovan
To make it consistent with the rest of the API. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove export of l2cap_chan_clear_timer()Gustavo F. Padovan
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c. This patch also adds a call to l2cap_chan_clear_timer() to the only place in __l2cap_sock_close() that wasn't calling it. It's safe call it there because l2cap_chan_clear_timer() check first for timer_peding(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: create channel timer to replace sk_timerGustavo F. Padovan
The new timer does not belong to struct sock, tought it still touch some sock things, but this will be sorted out soon. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add chan->chan_type struct memberGustavo F. Padovan
chan_type says if our chan is raw(direclty access to HCI), connection less or connection oriented. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create l2cap_chan_send()Gustavo F. Padovan
This move all the sending logic to l2cap_core.c, but we still have a socket dependence there, struct msghdr. It will be removed in some of the further commits. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Create __l2cap_chan_close()Gustavo F. Padovan
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close(). At a first look it may not make sense, but with the further cleanups that will come it will. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove unnecessary use of hci_dev_list_lockJohan Hedberg
The get_connections function has no need to use hci_dev_list_lock. The code was there probably because of a copy-paste mistake. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Kill set but not used variable 'l2cap_sk' in ↵David Miller
rfcomm_sock_getsockopt_old() Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix set but not used warningGustavo F. Padovan
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Allow unsegmented SDU retries on sock_queue_rcv_skb failureRuiyi Zhang
In L2CAP_SDU_UNSEGMENTED case, if sock_queue_rcv_skb returns error, l2cap_ertm_reassembly_sdu should not return 0 so as to insert the skb into BUSY_QUEUE for later retries. Signed-off-by: Ruiyi Zhang <Ruiyi.Zhang@Atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08mac80211: fix IBSS teardown raceJohannes Berg
Ignacy reports that sometimes after leaving an IBSS joining a new one didn't work because there still were stations on the list. He fixed it by flushing stations when attempting to join a new IBSS, but this shouldn't be happening in the first case. When I looked into it I saw a race condition in teardown that could cause stations to be added after flush, and thus cause this situation. Ignacy confirms that after applying my patch he hasn't seen this happen again. Reported-by: Ignacy Gawedzki <i@lri.fr> Debugged-by: Ignacy Gawedzki <i@lri.fr> Tested-by: Ignacy Gawedzki <i@lri.fr> Cc: stable@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-06-07ceph: fix sync vs canceled writeSage Weil
If we cancel a write, trigger the safe completions to prevent a sync from blocking indefinitely in ceph_osdc_sync(). Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07xfrm: Fix off by one in the replay advance functionsSteffen Klassert
We may write 4 byte too much when we reinitialize the anti replay window in the replay advance functions. This patch fixes this by adjusting the last index of the initialization loop. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-07mac80211: Stop BA session event from deviceShahar Levi
Some devices support BT/WLAN co-existence algorigthms. In order not to harm the system performance and user experience, the device requests not to allow any RX BA session and tear down existing RX BA sessions based on system constraints such as periodic BT activity that needs to limit WLAN activity (eg.SCO or A2DP). In such cases, the intention is to limit the duration of the RX PPDU and therefore prevent the peer device to use A-MPDU aggregation. Adding ieee80211_stop_rx_ba_session() callback that can be used by the driver to stop existing BA sessions. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07nl80211: fix overflow in ssid_lenLuciano Coelho
When one of the SSID's length passed in a scan or sched_scan request is larger than 255, there will be an overflow in the u8 that is used to store the length before checking. This causes the check to fail and we overrun the buffer when copying the SSID. Fix this by checking the nl80211 attribute length before copying it to the struct. This is a follow up for the previous commit 208c72f4fe44fe09577e7975ba0e7fa0278f3d03, which didn't fix the problem entirely. Reported-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-06-07Revert "mac80211: stop queues before rate control updation"John W. Linville
This reverts commit 1d38c16ce4156f63b45abbd09dd28ca2ef5172b4. The mac80211 maintainer raised complaints about abuse of the CSA stop reason, and about whether this patch actually serves its intended purpose at all. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07net: cpu offline cause napi stallHeiko Carstens
Frank Blaschka reported : <quote> During heavy network load we turn off/on cpus. Sometimes this causes a stall on the network device. Digging into the dump I found out following: napi is scheduled but does not run. From the I/O buffers and the napi state I see napi/rx_softirq processing has stopped because the budget was reached. napi stays in the softnet_data poll_list and the rx_softirq was raised again. I assume at this time the cpu offline comes in, the rx softirq is raised/moved to another cpu but napi stays in the poll_list of the softnet_data of the now offline cpu. Reviewing dev_cpu_callback (net/core/dev.c) I did not find the poll_list is transfered to the new cpu. </quote> This patch is a straightforward implementation of Frank suggestion : Transfert poll_list and trigger NET_RX_SOFTIRQ on new cpu. Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-07bridge: provide a cow_metrics method for fake_opsAlexander Holler
Like in commit 0972ddb237 (provide cow_metrics() methods to blackhole dst_ops), we must provide a cow_metrics for bridges fake_dst_ops as well. This fixes a regression coming from commits 62fa8a846d7d (net: Implement read-only protection and COW'ing of metrics.) and 33eb9873a28 (bridge: initialize fake_rtable metrics) ip link set mybridge mtu 1234 --> [ 136.546243] Pid: 8415, comm: ip Tainted: P 2.6.39.1-00006-g40545b7 #103 ASUSTeK Computer Inc. V1Sn /V1Sn [ 136.546256] EIP: 0060:[<00000000>] EFLAGS: 00010202 CPU: 0 [ 136.546268] EIP is at 0x0 [ 136.546273] EAX: f14a389c EBX: 000005d4 ECX: f80d32c0 EDX: f80d1da1 [ 136.546279] ESI: f14a3000 EDI: f255bf10 EBP: f15c3b54 ESP: f15c3b48 [ 136.546285] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 136.546293] Process ip (pid: 8415, ti=f15c2000 task=f4741f80 task.ti=f15c2000) [ 136.546297] Stack: [ 136.546301] f80c658f f14a3000 ffffffed f15c3b64 c12cb9c8 f80d1b80 ffffffa1 f15c3bbc [ 136.546315] c12da347 c12d9c7d 00000000 f7670b00 00000000 f80d1b80 ffffffa6 f15c3be4 [ 136.546329] 00000004 f14a3000 f255bf20 00000008 f15c3bbc c11d6cae 00000000 00000000 [ 136.546343] Call Trace: [ 136.546359] [<f80c658f>] ? br_change_mtu+0x5f/0x80 [bridge] [ 136.546372] [<c12cb9c8>] dev_set_mtu+0x38/0x80 [ 136.546381] [<c12da347>] do_setlink+0x1a7/0x860 [ 136.546390] [<c12d9c7d>] ? rtnl_fill_ifinfo+0x9bd/0xc70 [ 136.546400] [<c11d6cae>] ? nla_parse+0x6e/0xb0 [ 136.546409] [<c12db931>] rtnl_newlink+0x361/0x510 [ 136.546420] [<c1023240>] ? vmalloc_sync_all+0x100/0x100 [ 136.546429] [<c1362762>] ? error_code+0x5a/0x60 [ 136.546438] [<c12db5d0>] ? rtnl_configure_link+0x80/0x80 [ 136.546446] [<c12db27a>] rtnetlink_rcv_msg+0xfa/0x210 [ 136.546454] [<c12db180>] ? __rtnl_unlock+0x20/0x20 [ 136.546463] [<c12ee0fe>] netlink_rcv_skb+0x8e/0xb0 [ 136.546471] [<c12daf1c>] rtnetlink_rcv+0x1c/0x30 [ 136.546479] [<c12edafa>] netlink_unicast+0x23a/0x280 [ 136.546487] [<c12ede6b>] netlink_sendmsg+0x26b/0x2f0 [ 136.546497] [<c12bb828>] sock_sendmsg+0xc8/0x100 [ 136.546508] [<c10adf61>] ? __alloc_pages_nodemask+0xe1/0x750 [ 136.546517] [<c11d0602>] ? _copy_from_user+0x42/0x60 [ 136.546525] [<c12c5e4c>] ? verify_iovec+0x4c/0xc0 [ 136.546534] [<c12bd805>] sys_sendmsg+0x1c5/0x200 [ 136.546542] [<c10c2150>] ? __do_fault+0x310/0x410 [ 136.546549] [<c10c2c46>] ? do_wp_page+0x1d6/0x6b0 [ 136.546557] [<c10c47d1>] ? handle_pte_fault+0xe1/0x720 [ 136.546565] [<c12bd1af>] ? sys_getsockname+0x7f/0x90 [ 136.546574] [<c10c4ec1>] ? handle_mm_fault+0xb1/0x180 [ 136.546582] [<c1023240>] ? vmalloc_sync_all+0x100/0x100 [ 136.546589] [<c10233b3>] ? do_page_fault+0x173/0x3d0 [ 136.546596] [<c12bd87b>] ? sys_recvmsg+0x3b/0x60 [ 136.546605] [<c12bdd83>] sys_socketcall+0x293/0x2d0 [ 136.546614] [<c13629d0>] sysenter_do_call+0x12/0x26 [ 136.546619] Code: Bad EIP value. [ 136.546627] EIP: [<00000000>] 0x0 SS:ESP 0068:f15c3b48 [ 136.546645] CR2: 0000000000000000 [ 136.546652] ---[ end trace 6909b560e78934fa ]--- Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06af_packet: prevent information leakEric Dumazet
In 2.6.27, commit 393e52e33c6c2 (packet: deliver VLAN TCI to userspace) added a small information leak. Add padding field and make sure its zeroed before copy to user. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06irda: iriap: Use seperate lockdep class for irias_objects->hb_spinlockDavid S. Miller
The SEQ output functions grab the obj->attrib->hb_spinlock lock of sub-objects found in the hash traversal. These locks are in a different realm than the one used for the irias_objects hash table itself. So put the latter into it's own lockdep class. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06net: Rework netdev_drivername() to avoid warning.David S. Miller
This interface uses a temporary buffer, but for no real reason. And now can generate warnings like: net/sched/sch_generic.c: In function dev_watchdog net/sched/sch_generic.c:254:10: warning: unused variable drivername Just return driver->name directly or "". Reported-by: Connor Hansen <cmdkhh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06net/ipv6: check for mistakenly passed in non-AF_INET6 sockaddrsMarcus Meissner
Same check as for IPv4, also do for IPv6. (If you passed in a IPv4 sockaddr_in here, the sizeof check in the line before would have triggered already though.) Signed-off-by: Marcus Meissner <meissner@suse.de> Cc: Reinhard Max <max@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-06-06sctp: Guard IPV6 specific code properly.David S. Miller
Outside of net/sctp/ipv6.c, IPV6 specific code needs to be ifdef guarded. This fixes build failures with IPV6 disabled. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06Revert "mac80211: Skip tailroom reservation for full HW-crypto devices"John W. Linville
This reverts commit aac6af5534fade2b18682a0b9efad1a6c04c34c6. Conflicts: net/mac80211/key.c That commit has a race that causes a warning, as documented in the thread here: http://marc.info/?l=linux-wireless&m=130717684914101&w=2 Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-06nfsd: fix dependency of nfsd on auth_rpcgssJ. Bruce Fields
Commit b0b0c0a26e84 "nfsd: add proc file listing kernel's gss_krb5 enctypes" added an nunnecessary dependency of nfsd on the auth_rpcgss module. It's a little ad hoc, but since the only piece of information nfsd needs from rpcsec_gss_krb5 is a single static string, one solution is just to share it with an include file. Cc: stable@kernel.org Reported-by: Michael Guntsche <mike@it-loops.com> Cc: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-06-06Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
generated by cgit (git 2.34.1) at 2025-09-13 02:11:41 +0000