summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2010-02-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-02-16netfilter: ebtables: mark: add CONFIG_COMPAT supportFlorian Westphal
Add the required handlers to convert 32 bit ebtables mark match and match target structs to 64bit layout. Signed-off-by: Florian Westphal <fwestphal@astaro.com>
2010-02-16netfilter: ebt_limit: add CONFIG_COMPAT supportFlorian Westphal
ebt_limit structure is larger on 64 bit systems due to "long" type used in the (kernel-only) data section. Setting .compatsize is enough in this case, these values have no meaning in userspace. Signed-off-by: Florian Westphal <fwestphal@astaro.com>
2010-02-16netfilter: ebtables: try native set/getsockopt handlers, tooFlorian Westphal
ebtables can be compiled to perform userspace-side padding of structures. In that case, all the structures are already in the 'native' format expected by the kernel. This tries to determine what format the userspace program is using. For most set/getsockopts, this can be done by checking the len argument for sizeof(compat_ebt_replace) and re-trying the native handler on error. In case of EBT_SO_GET_ENTRIES, the native handler is tried first, it will error out early when checking the *len argument (the compat version has to defer this check until after iterating over the kernel data set once, to adjust for all the structure size differences). As this would cause error printks, remove those as well, as recommended by Bart de Schuymer. Signed-off-by: Florian Westphal <fw@strlen.de>
2010-02-16netfilter: ebtables: add CONFIG_COMPAT supportFlorian Westphal
Main code for 32 bit userland ebtables binary with 64 bit kernels support. Tested on x86_64 kernel only, using 64bit ebtables binary for output comparision. At least ebt_mark, m_mark and ebt_limit need CONFIG_COMPAT hooks, too. remaining problem: The ebtables userland makefile has: ifeq ($(shell uname -m),sparc64) CFLAGS+=-DEBT_MIN_ALIGN=8 -DKERNEL_64_USERSPACE_32 endif struct ebt_replace, ebt_entry_match etc. then contain userland-side padding, i.e. even if we are called from a 32 bit userland, the structures may already be in the right format. This problem is addressed in a follow-up patch. Signed-off-by: Florian Westphal <fwestphal@astaro.com>
2010-02-16netfilter: ebtables: split update_counters into two functionsFlorian Westphal
allows to call do_update_counters() from upcoming CONFIG_COMPAT code instead of copy&pasting the same code. Signed-off-by: Florian Westphal <fw@strlen.de>
2010-02-16netfilter: ebtables: split copy_everything_to_user into two functionsFlorian Westphal
once CONFIG_COMPAT support is added to ebtables, the new copy_counters_to_user function can be called instead of duplicating code. Also remove last use of MEMPRINT, as requested by Bart De Schuymer. Signed-off-by: Florian Westphal <fw@strlen.de>
2010-02-16netfilter: ebtables: split do_replace into two functionsFlorian Westphal
once CONFIG_COMPAT support is merged this allows to call do_replace_finish() after doing the CONFIG_COMPAT conversion instead of copy & pasting this. Signed-off-by: Florian Westphal <fw@strlen.de>
2010-02-15ethtool: reduce stack usageEric Dumazet
dev_ethtool() is currently using 604 bytes of stack, even with gcc-4.4.2 objdump -d vmlinux | scripts/checkstack.pl ... 0xc04bbc33 dev_ethtool [vmlinux]: 604 ... Adding noinline attributes to selected functions can reduce stack usage. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15X25: Dont let x25_bind use addresses containing charactersandrew hendry
Addresses should be all digits. Stops x25_bind using addresses containing characters. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15X25: Fix x25_create errors for bad protocol and ENOBUFSandrew hendry
alloc_socket failures should return -ENOBUFS a bad protocol should return -EINVAL Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15xfrm: Flushing empty SPD generates false eventsjamal
Observed similar behavior on SPD as previouly seen on SAD flushing.. This fixes it. cheers, jamal commit 428b20432dc31bc2e01a94cd451cf5a2c00d2bf4 Author: Jamal Hadi Salim <hadi@cyberus.ca> Date: Thu Feb 11 05:49:38 2010 -0500 xfrm: Flushing empty SPD generates false events To see the effect make sure you have an empty SPD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm policy flush" You get prompt back in window1 and you see the flush event on window2. With this fix, you still get prompt on window1 but no event on window2. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15xfrm: Flushing empty SAD generates false eventsjamal
To see the effect make sure you have an empty SAD. -On window1 "ip xfrm mon" -on window2 issue "ip xfrm state flush" You get prompt back in window1 and you see the flush event on window2. With this fix, you still get prompt on window1 but no event on window2. I was tempted to return -ESRCH on window1 (which would show "RTNETLINK answers: No such process") but didnt want to change current behavior. cheers, jamal commit 5f3dd4a772326166e1bcf54acc2391df00dc7ab5 Author: Jamal Hadi Salim <hadi@cyberus.ca> Date: Thu Feb 11 04:41:36 2010 -0500 xfrm: Flushing empty SAD generates false events To see the effect make sure you have an empty SAD. On window1 "ip xfrm mon" and on window2 issue "ip xfrm state flush" You get prompt back in window1 and you see the flush event on window2. With this fix, you still get prompt on window1 but no event on window2. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15IPv6: Delete redundant counter of IPSTATS_MIB_REASMFAILSShan Wei
When no more memory can be allocated, fq_find() will return NULL and increase the value of IPSTATS_MIB_REASMFAILS. In this case, ipv6_frag_rcv() also increase the value of IPSTATS_MIB_REASMFAILS. So, the patch deletes redundant counter of IPSTATS_MIB_REASMFAILS in fq_find(). and deletes the unused parameter of idev. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ethtool: Move n-tuple capability check into set_flagsPeter Waskiewicz
set_flags should check if the underlying device supports n-tuple filter programming before setting the device flags on the netdevice. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ethtool: Fix filter addition when caching n-tuple filtersPeter Waskiewicz
We can allow a filter to be added successfully to the underlying hardware, but still return an error if the cached list memory allocation fails. This patch fixes that condition. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15cfg80211/mac80211: allow registering for and sending action framesJouni Malinen
This implements a new command to register for action frames that userspace wants to handle instead of the in-kernel rejection. It is then responsible for rejecting ones that it decided not to handle. There is no unregistration, but the socket can be closed for that. Frames that are not registered for will not be forwarded to userspace and will be rejected by the kernel, the cfg80211 API helps implementing that. Additionally, this patch adds a new command that allows doing action frame transmission from userspace. It can be used either to exchange action frames on the current operational channel (e.g., with the AP with which we are currently associated) or to exchange off-channel Public Action frames with the remain-on-channel command. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15mac80211: reject unhandled action framesJohannes Berg
802.11-2007 7.3.1.11 mandates that we need to reject action frames we don't handle by setting the 0x80 bit in the category and returning them to the sender, so do that. In AP mode, hostapd is responsible for this. Additionally, drop completely malformed action frames or ones that should've been encrypted as unusable, userspace shouldn't see those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15nl80211: does not allow NEW_STATION and DEL_STATION for meshThadeu Lima de Souza Cascardo
As discussed in linux-wireless mailing list, adding and removing stations for mesh topologies is not necessary. Since doing it triggers bugs, the sugestion was to simply disable it. Tested using a custom iw command "station new". Works only after using hostapd. "station del" command also works. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Simon Raffeiner <sturmflut@lieberbiber.de> Cc: Andrey Yurovsky <andrey@cozybit.com> Cc: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15mac80211: fix netdev renameJohannes Berg
Fix a copy bug introduced by commit 47846c9b0c10808d9337d2e7d09361f3e0a0a71a Author: Johannes Berg <johannes@sipsolutions.net> Date: Wed Nov 25 17:46:19 2009 +0100 mac80211: reduce reliance on netdev This manifested itself only in debug messages and in the debugfs rename failure that would always happen due to trying to rename the dir over itself. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-15netfilter: CONFIG_COMPAT: allow delta to exceed 32767Florian Westphal
with 32 bit userland and 64 bit kernels, it is unlikely but possible that insertion of new rules fails even tough there are only about 2000 iptables rules. This happens because the compat delta is using a short int. Easily reproducible via "iptables -m limit" ; after about 2050 rules inserting new ones fails with -ELOOP. Note that compat_delta included 2 bytes of padding on x86_64, so structure size remains the same. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: ebtables: avoid explicit XT_ALIGN() in match/targetsFlorian Westphal
This will cause trouble once CONFIG_COMPAT support is added to ebtables. xt_compat_*_offset() calculate the kernel/userland structure size delta using: XT_ALIGN(size) - COMPAT_XT_ALIGN(size) If the match/target sizes are aligned at registration time, delta is always zero. Should have zero effect for existing systems: xtables uses XT_ALIGN() whenever it deals with match/target sizes. Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: ebtables: abort if next_offset is too smallFlorian Westphal
next_offset must be > 0, otherwise this loops forever. The offset also contains the size of the ebt_entry structure itself, so anything smaller is invalid. Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: ctnetlink: add zone supportPatrick McHardy
Parse and dump the conntrack zone in ctnetlink. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: nf_conntrack: add support for "conntrack zones"Patrick McHardy
Normally, each connection needs a unique identity. Conntrack zones allow to specify a numerical zone using the CT target, connections in different zones can use the same identity. Example: iptables -t raw -A PREROUTING -i veth0 -j CT --zone 1 iptables -t raw -A OUTPUT -o veth1 -j CT --zone 1 Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: nf_conntrack: pass template to l4proto ->error() handlerPatrick McHardy
The error handlers might need the template to get the conntrack zone introduced in the next patches to perform a conntrack lookup. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: xtables: add const qualifiersJan Engelhardt
This should make it easier to remove redundant arguments later. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: xtables: constify args in compat copying functionsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: xtables: print details on size mismatchJan Engelhardt
Print which revision has been used and which size are which (kernel/user) for easier debugging. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: iptables: remove unused function argumentsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: xt_recent: inform user when hitcount is too largeJan Engelhardt
It is one of these things that iptables cannot catch and which can cause "Invalid argument" to be printed. Without a hint in dmesg, it is not going to be helpful. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-14mac80211: Fix error introduced in netdev_mc_count() changes.David S. Miller
Commit 4cd24eaf0c6ee7f0242e34ee77ec899f255e66b5 ("net: use netdev_mc_count and netdev_mc_empty when appropriate") added this hunk to net/mac80211/iface.c: __dev_addr_unsync(&local->mc_list, &local->mc_count, - &dev->mc_list, &dev->mc_count); + &dev->mc_list, dev->mc_count); which is definitely not correct, introduced a warning (reported by Stephen Rothwell): net/mac80211/iface.c: In function 'ieee80211_stop': net/mac80211/iface.c:416: warning: passing argument 4 of '__dev_addr_unsync' makes pointer from integer without a cast include/linux/netdevice.h:1967: note: expected 'int *' but argument is of type 'int' and is thus reverted here. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14net: Fix first line of kernel-doc for a few functionsBen Hutchings
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/rate.c
2010-02-14Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-14Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-12rtnetlink: Add VF config code to rtnetlinkWilliams, Mitch A
Add code to allow rtnetlink clients to query and set VF information through the PF driver. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12udp: remove redundant variableGerrit Renker
The variable 'copied' is used in udp_recvmsg() to emphasize that the passed 'len' is adjusted to fit the actual datagram length. But the same can be done by adjusting 'len' directly. This patch thus removes the indirection. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12dccp: support for passing MSG_TRUNCGerrit Renker
DCCP is datagram-oriented but lacks UDP's support for MSG_TRUNC as defined in recvmsg(2)/recv(2). Hence the following 'Hello world\0' receiver len = recv(fd, buf, 10, MSG_PEEK | MSG_TRUNC); wrongly (always) returns 10, while in UDP it returns 12 as expected. This patch adds the missing MSG_TRUNC support to recvmsg(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12xfrm: validate attributesjamal
Some XFRM attributes were not going through basic validation. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12IPv6: remove trivial nested _bh suffixstephen hemminger
Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12IPv6: keep permanent addresses on admin downstephen hemminger
Permanent IPV6 addresses should not be removed when the link is set to admin down, only when device is removed. When link is lost permanent addresses should be marked as tentative so that when link comes back they are subject to duplicate address detection (if DAD was enabled for that address). Other routing systems keep manually configured IPv6 addresses when link is set down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12ipv6: fib: fix crash when changing large fib while dumping itPatrick McHardy
When the fib size exceeds what can be dumped in a single skb, the dump is suspended and resumed once the last skb has been received by userspace. When the fib is changed while the dump is suspended, the walker might contain stale pointers, causing a crash when the dump is resumed. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] PGD 5347a067 PUD 65c7067 PMD 0 Oops: 0000 [#1] PREEMPT SMP ... RIP: 0010:[<ffffffffa01bce04>] [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] ... Call Trace: [<ffffffff8104aca3>] ? mutex_spin_on_owner+0x59/0x71 [<ffffffffa01bd105>] inet6_dump_fib+0x11b/0x1b9 [ipv6] [<ffffffff81371af4>] netlink_dump+0x5b/0x19e [<ffffffff8134f288>] ? consume_skb+0x28/0x2a [<ffffffff81373b69>] netlink_recvmsg+0x1ab/0x2c6 [<ffffffff81372781>] ? netlink_unicast+0xfa/0x151 [<ffffffff813483e0>] __sock_recvmsg+0x6d/0x79 [<ffffffff81348a53>] sock_recvmsg+0xca/0xe3 [<ffffffff81066d4b>] ? autoremove_wake_function+0x0/0x38 [<ffffffff811ed1f8>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff810b3ed7>] ? find_get_page+0x90/0xa5 [<ffffffff810b5dc5>] ? filemap_fault+0x201/0x34f [<ffffffff810ef152>] ? fget_light+0x2f/0xac [<ffffffff813519e7>] ? verify_iovec+0x4f/0x94 [<ffffffff81349a65>] sys_recvmsg+0x14d/0x223 Store the serial number when beginning to walk the fib and reload pointers when continuing to walk after a change occured. Similar to other dumping functions, this might cause unrelated entries to be missed when entries are deleted. Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12mac80211: fix handling of null-rate control in rate_control_get_rateJuuso Oikarinen
For hardware with IEEE80211_HW_HAS_RATE_CONTROL the rate controller is not initialized. However, calling functions such as ieee80211_beacon_get result in the rate_control_get_rate function getting called, which is accessing (in this case uninitialized) rate control structures unconditionally. Fix by exiting the function before setting the rates for HW with IEEE80211_HW_HAS_RATE_CONTROL set. The initialization of the ieee80211_tx_info struct is intentionally still executed. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-12dccp: allow probing of CCID-array lengthGerrit Renker
This fixes a problem in the DCCP getsockopt() API: currently there is no way for a user to a priori know the number of built-in CCIDs, other than trying DCCP_SOCKOPT_AVAILABLE_CCIDS in a loop, incrementing the option length until EINVAL is no longer returned. This patch truncates the array to the user-provided length. No copy is made when the length is <= 0. Due to the length restriction in do_dccp_getsockopt() to sizeof(int), the minimum array length remains 4, which is a reasonable default (only 3 CCIDs, CCID-2..4, are currently defined). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12inet: Remove bogus IGMPv3 report handlingHerbert Xu
Currently we treat IGMPv3 reports as if it were an IGMPv2/v1 report. This is broken as IGMPv3 reports are formatted differently. So we end up suppressing a bogus multicast group (which should be harmless as long as the leading reserved field is zero). In fact, IGMPv3 does not allow membership report suppression so we should simply ignore IGMPv3 membership reports as a host. This patch does exactly that. I kept the case statement for it so people won't accidentally add it back thinking that we overlooked this case. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12netfilter: don't use INIT_RCU_HEAD()Alexey Dobriyan
call_rcu() will unconditionally reinitialize RCU head anyway. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11ethtool: Use explicit designated initializers for .cmdRoland Dreier
Initialize the .cmd member of various ethtool using a designated struct initializer rather. This makes things a teeny bit more robust, although the chance of a struct layout changing is extremely remote, and also makes the code a little easier to read. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-11netfilter: xtables: fix mangle tablesAlexey Dobriyan
In POST_ROUTING hook, calling dev_net(in) is going to oops. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
generated by cgit (git 2.34.1) at 2025-09-11 22:32:45 +0000