summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-02-12netfilter: nf_ct_helper: don't discard helper if it is actually the sameFlorian Westphal
commit (32f5376 netfilter: nf_ct_helper: disable automatic helper re-assignment of different type) broke transparent proxy scenarios. For example, initial helper lookup might yield "ftp" (dport 21), while re-lookup after REDIRECT yields "ftp-2121". This causes the autoassign code to toss the ftp helper, even though these are just different instances of the same helper. Change the test to check for the helper function address instead of the helper address, as suggested by Pablo. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2013-02-12netfilter: ctnetlink: don't permit ct creation with random tupleFlorian Westphal
Userspace can cause kernel panic by not specifying orig/reply tuple: kernel will create a tuple with random stack values. Problem is that tuple.dst.dir will be random, too, which causes nf_ct_tuplehash_to_ctrack() to return garbage. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@gnumonks.org>
2013-02-12Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Here is another handful of late-breaking fixes intended for the 3.8 stream... Hopefully the will still make it! :-) There are three mac80211 fixes pulled from Johannes: "Here are three fixes still for the 3.8 stream, the fix from Cong Ding for the bad sizeof (Stephen Hemminger had pointed it out before but I'd promptly forgotten), a mac80211 managed-mode channel context usage fix where a downgrade would never stop until reaching non-HT and a bug in the channel determination that could cause invalid channels like HT40+ on channel 11 to be used." Also included is a mwl8k fix that avoids an oops when using mwl8k devices that only support the 5 GHz band. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: fix infinite loop in __skb_recv_datagram()Eric Dumazet
Tommi was fuzzing with trinity and reported the following problem : commit 3f518bf745 (datagram: Add offset argument to __skb_recv_datagram) missed that a raw socket receive queue can contain skbs with no payload. We can loop in __skb_recv_datagram() with MSG_PEEK mode, because wait_for_packet() is not prepared to skip these skbs. [ 83.541011] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=26002 jiffies, g=27673, c=27672, q=75) [ 83.541011] INFO: Stall ended before state dump start [ 108.067010] BUG: soft lockup - CPU#0 stuck for 22s! [trinity-child31:2847] ... [ 108.067010] Call Trace: [ 108.067010] [<ffffffff818cc103>] __skb_recv_datagram+0x1a3/0x3b0 [ 108.067010] [<ffffffff818cc33d>] skb_recv_datagram+0x2d/0x30 [ 108.067010] [<ffffffff819ed43d>] rawv6_recvmsg+0xad/0x240 [ 108.067010] [<ffffffff818c4b04>] sock_common_recvmsg+0x34/0x50 [ 108.067010] [<ffffffff818bc8ec>] sock_recvmsg+0xbc/0xf0 [ 108.067010] [<ffffffff818bf31e>] sys_recvfrom+0xde/0x150 [ 108.067010] [<ffffffff81ca4329>] system_call_fastpath+0x16/0x1b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12net: sctp: remove unused multiple cookie keysDaniel Borkmann
Vlad says: The whole multiple cookie keys code is completely unused and has been all this time. Noone uses anything other then the secret_key[0] since there is no changeover support anywhere. Thus, for now clean up its left-over fragments. Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-02-129p: Modify the stat structures to use kuid_t and kgid_tEric W. Biederman
9p has thre strucrtures that can encode inode stat information. Modify all of those structures to contain kuid_t and kgid_t values. Modify he wire encoders and decoders of those structures to use 'u' and 'g' instead of 'd' in the format string where uids and gids are present. This results in all kuid and kgid conversion to and from on the wire values being performed by the same code in protocol.c where the client is known at the time of the conversion. Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2013-02-129p: Transmit kuid and kgid valuesEric W. Biederman
Modify the p9_client_rpc format specifiers of every function that directly transmits a uid or a gid from 'd' to 'u' or 'g' as appropriate. Modify those same functions to take kuid_t and kgid_t parameters instead of uid_t and gid_t parameters. Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2013-02-129p: Add 'u' and 'g' format specifies for kuids and kgidsEric W. Biederman
This allows concentrating all of the conversion to and from kuids and kgids into the format needed by the 9p protocol into one location. Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@gmail.com> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-12ceph: Only allow mounts in the initial network namespaceEric W. Biederman
Today ceph opens tcp sockets from a delayed work callback. Delayed work happens from kernel threads which are always in the initial network namespace. Therefore fail early if someone attempts to mount a ceph filesystem from something other than the initial network namespace. Cc: Sage Weil <sage@inktank.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-12mac80211: allow driver to be stateless wrt. SMSP requestsEmmanuel Grumbach
Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11netpoll: cleanup sparse warningsNeil Horman
With my recent commit I introduced two sparse warnings. Looking closer there were a few more in the same file, so I fixed them all up. Basic rcu pointer dereferencing suff. I've validated these changes using CONFIG_PROVE_RCU while starting and stopping netconsole repeatedly in bonded and non-bonded configurations Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: fengguang.wu@intel.com CC: David Miller <davem@davemloft.net> CC: eric.dumazet@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lockNeil Horman
__netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is already held. The mechanism is used to asynchronously call __netpoll_cleanup outside of the holding of the rtnl_lock, so as to avoid deadlock. Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the rtnl_lock must be held while calling it. Further, it cannot be held, because rcu callbacks may be issued in softirq contexts, which cannot sleep. Fix this by converting the rcu callback to a work queue that is guaranteed to get scheduled in process context, so that we can hold the rtnl properly while calling __netpoll_cleanup Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Cong Wang <amwang@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11skbuff: create skb_panic() function and its wrappersJean Sacren
Create skb_panic() function in lieu of both skb_over_panic() and skb_under_panic() so that code duplication would be avoided. Update type and variable name where necessary. Jiri Pirko suggested using wrappers so that we would be able to keep the fruits of the original code. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11mac80211: Add flushes before going off-channelSeth Forshee
We've got a couple of races when enabling powersave with an AP for off-channel operation. The first is fairly simple. If we go off-channel before the nullfunc frame to enable PS is transmitted then it may not be received by the AP. Add a flush after enabling off-channel PS to prevent this from happening. The second race is a bit more subtle. If the driver supports QoS and has frames queued when the nullfunc frame is queued, those frames may get transmitted after the nullfunc frame. If PM is not set then the AP is being told that we've exited PS before we go off-channel and may try to deliver frames. To prevent this, add a flush after stopping the queues but before passing the nullfunc frame to the driver. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: Fix tx queue handling during scansSeth Forshee
Scans currently work by stopping the netdev tx queues but leaving the mac80211 queues active. This stops the flow of incoming packets while still allowing mac80211 to transmit nullfunc and probe request frames to facilitate scanning. However, the driver may try to wake the mac80211 queues while in this state, which will also wake the netdev queues. To prevent this, add a new queue stop reason, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, to be used when stopping the tx queues for off-channel operation. This prevents the netdev queues from waking when a driver wakes the mac80211 queues. This also stops all frames from being transmitted, even those meant to be sent off-channel. Add a new tx control flag, IEEE80211_TX_CTL_OFFCHAN_TX_OK, which allows frames to be transmitted when the queues are stopped only for the off-channel stop reason. Update all locations transmitting off-channel frames to use this flag. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211/minstrel_ht: remove the sampling bypass check for the lowest rateFelix Fietkau
It's more of an unnecessary micro-optimization and it prevents switching from long-GI to short-GI in HT20/single-stream for the lowest rate Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211/minstrel_ht: show the number of retries for each rate in debugfsFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-02-11bridge: set priority of STP packetsStephen Hemminger
Spanning Tree Protocol packets should have always been marked as control packets, this causes them to get queued in the high prirority FIFO. As Radia Perlman mentioned in her LCA talk, STP dies if bridge gets overloaded and can't communicate. This is a long-standing bug back to the first versions of Linux bridge. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11mrp: make mrp_rcv staticStephen Hemminger
Sparse spotted local function that could be static. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ethtool: fix sparse warningStephen Hemminger
Fixes sparse complaints about dropping __user in casts. warning: cast removes address space of expression Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11bridge: use dev->addr_assign_type to see if user change macJiri Pirko
And remove no longer used br->flags. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ipv6: by default join ff01::1 and in case of forwarding ff01::2 and ff05:2Hannes Frederic Sowa
Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ipv6: don't accept multicast traffic with scope 0Hannes Frederic Sowa
v2: a) moved before multicast source address check b) changed comment to netdev style Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ipv6: don't let node/interface scoped multicast traffic escape on the wireHannes Frederic Sowa
Reported-by: Erik Hugne <erik.hugne@ericsson.com> Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11mac80211: remove unused code to mark AP station authenticatedJohannes Berg
When we get to association, the AP station already exists and is marked authenticated, so moving it into IEEE80211_STA_AUTH again is a NOP, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: simplify idle handlingJohannes Berg
Now that we have channel contexts, idle is (pretty much) equivalent to not having a channel context. Change the code to use this relation so that there no longer is a need for a lot of idle recalculate calls everywhere. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLEJohannes Berg
There are only a few drivers that use HW scan, and all of those don't need a non-idle transition before starting the scan -- some don't even care about idle at all. Remove the flag and code associated with it. The only driver that really actually needed this is wl1251 and it can just do it itself in the hw_scan callback -- implement that. Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: remove dynamic PS driver interfaceJohannes Berg
The functions were added for some sort of Bluetooth coexistence, but aren't used, so remove them again. Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: introduce beacon-only timing dataJohannes Berg
In order to be able to predict the next DTIM TBTT in the driver, add the ability to use timing data from beacons only with the new hardware flag IEEE80211_HW_TIMING_BEACON_ONLY and the BSS info value sync_dtim_count which is only valid if the timing data came from a beacon. The data can only come from a beacon, and if no beacon was received before association it is updated later together with the DTIM count notification. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: move TSF into IEsJohannes Berg
While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: remove scan ies NULL checkJohannes Berg
There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: add vif debugfs driver callbacksAlexander Bondar
Add debugfs driver callbacks so drivers can add debugfs entries for interfaces. Note that they _must_ remove the entries again as add/remove in the driver doesn't correspond to add/remove in debugfs; the former is up/down while the latter is netdev create/destroy. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: track hidden SSID networks properlyJohannes Berg
Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: explicitly copy channels to VLANs where neededJohannes Berg
Currently the code assigns channel contexts to VLANs (for use by the TX/RX code) when the AP master gets its channel context assigned. This works fine, but in the upcoming radar detection work the VLANs don't require a channel context (during radar detection) and assigning one to them anyway causes issues with locking and also inconsistencies -- a VLAN interface that is added before radar detection would get the channel context, while one added during it wouldn't. Fix these issues moving the channel context copying to a new explicit operation that will not be used in the radar detection code. Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: fix chandef tracing bugJohannes Berg
The chandef tracing writes center_freq1 twice, so that it is always 0 (no driver supports 80+80 yet) and leaves center_freq2 unset. Fix this mistake. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: fix AP beacon loss messagesJohannes Berg
The messages currently refer to probe request probes, but on some devices null data packets will be used instead. Make the messages more generic. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: protect rx-path with spinlockChristian Lamparter
This patch fixes the problem which was discussed in "mac80211: Fix PN corruption in case of multiple virtual interface" [1]. Amit Shakya reported a serious issue with my patch: mac80211: serialize rx path workers" [2]: In case, ieee80211_rx_handlers processing is going on for skbs received on one vif and at the same time, rx aggregation reorder timer expires on another vif then sta_rx_agg_reorder_timer_expired is invoked and it will push skbs into the single queue (local->rx_skb_queue). ieee80211_rx_handlers in the while loop assumes that the skbs are for the same sdata and sta. This assumption doesn't hold good in this scenario and the PN gets corrupted by PN received in other vif's skb, causing traffic to stop due to PN mismatch." [1] Message-Id: http://mid.gmane.org/201302041844.44436.chunkeey@googlemail.com [2] Commit-Id: 24a8fdad35835e8d71f7 Reported-by: Amit Shakya <amit.shakya@stericsson.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: Add the DS Params for mesh to every bandEmanuel Taube
There seems to be no reason, why it has to be limited to 2.4 GHz. Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com> [remove 'local' variable] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11mac80211: fix mesh sta teardownThomas Pedersen
The patch "mac80211: clean up mesh sta allocation warning" moved some mesh initialization into a path which is only called when the kernel handles peering. This causes a hang when mac80211 tries to clean up a userspace-allocated station entry and delete a timer which has never been initialized. To avoid this, only do any mesh sta peering teardown if the kernel is actually handling it. The same is true when quiescing before suspend. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11wireless: fix kernel-docJohannes Berg
Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: pass wiphy to cfg80211_ref_bss/put_bssJohannes Berg
This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao <bzhao@marvell.com> [mwifiex] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: fix radar check for P2P_DEVICEIlan Peer
Radar is not required for P2P_DEVICE interfaces. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11cfg80211: Fix memory leakLarry Finger
When a driver requests a specific regulatory domain after cfg80211 already has one, a struct ieee80211_regdomain is leaked. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11Merge remote-tracking branch 'wireless-next/master' into HEADJohannes Berg
2013-02-11xfrm: Allow inserting policies with matching mark and different prioritiesSteffen Klassert
We currently can not insert policies with mark and mask such that some flows would be matched from both policies. We make this possible when the priority of these policies are different. If both policies match a flow, the one with the higher priority is used. Reported-by: Emmanuel Thierry <emmanuel.thierry@telecom-bretagne.eu> Reported-by: Romain Kuntz <r.kuntz@ipflavors.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-02-11mac80211: fix channel selection bugJohannes Berg
When trying to connect to an AP that advertises HT but not VHT, the mac80211 code erroneously uses the configuration from the AP as is instead of checking it against regulatory and local capabilities. This can lead to using an invalid or even inexistent channel (like 11/HT40+). Additionally, the return flags from downgrading must be ORed together, to collect them from all of the downgrades. Also clarify the message. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-02-11net neighbour, decnet: Ensure to align device private data on preferred ↵YOSHIFUJI Hideaki / 吉藤英明
alignment. To allow both of protocol-specific data and device-specific data attached with neighbour entry, and to eliminate size calculation cost when allocating entry, sizeof protocol-speicic data must be multiple of NEIGH_PRIV_ALIGN. On 64bit archs, sizeof(struct dn_neigh) is multiple of NEIGH_PRIV_ALIGN, but on 32bit archs, it was not. Introduce NEIGH_ENTRY_SPACE() macro to ensure that protocol-specific entry-size meets our requirement. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11ipv6 mcast: Do not join device multicast for interface-local multicasts.YOSHIFUJI Hideaki / 吉藤英明
RFC4291 (IPv6 addressing architecture) says that interface-Local scope spans only a single interface on a node. We should not join L2 device multicast list for addresses in interface-local (or smaller) scope. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 16:53:16 +0000