| Age | Commit message (Collapse) | Author |
|---|
|
When converting an xdp_frame into an SKB, and sending this into the network
stack, then the underlying XDP memory model need to release associated
resources, because the network stack don't have callbacks for XDP memory
models. The only memory model that needs this is page_pool, when a driver
use the DMA-mapping feature.
Introduce page_pool_release_page(), which basically does the same as
page_pool_unmap_page(). Add xdp_release_frame() as the XDP memory model
interface for calling it, if the memory model match MEM_TYPE_PAGE_POOL, to
save the function call overhead for others. Have cpumap call
xdp_release_frame() before xdp_scrub_frame().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix error handling case, where inserting ID with rhashtable_insert_slow
fails in xdp_rxq_info_reg_mem_model, which leads to never releasing the IDA
ID, as the lookup in xdp_rxq_info_unreg_mem_model fails and thus
ida_simple_remove() is never called.
Fix by releasing ID via ida_simple_remove(), and mark xdp_rxq->mem.id with
zero, which is already checked in xdp_rxq_info_unreg_mem_model().
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On a previous patch dma addr was stored in 'struct page'.
Use that to unmap DMA addresses used by network drivers
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on 1 normalized pattern(s):
gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 58 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.556988620@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation see readme and copying for
more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081207.060259192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this source code is licensed under general public license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 5 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.871734026@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this work is licensed under the terms of the gnu gpl version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 48 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.624030236@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 53 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 2 normalized pattern(s):
this source code is licensed under the gnu general public license
version 2 see the file copying for more details
this source code is licensed under general public license version 2
see
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 52 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.449021192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Implement support for previously added flow dissector meta key.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use previously introduced infra to obtain and store ingress ifindex
instead doing it locally.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new key meta that contains ingress ifindex value and add a function
to dissect this from skb. The key and function is prepared to cover
other potential skb metadata values dissection.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Take mlx5-next so we can take a dependent two patch series next.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Module autoload for masquerade and redirection does not work.
2) Leak in unqueued packets in nf_ct_frag6_queue(). Ignore duplicated
fragments, pretend they are placed into the queue. Patches from
Guillaume Nault.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, hvsock can enter into a state where epoll_wait on EPOLLOUT will
not return even when the hvsock socket is writable, under some race
condition. This can happen under the following sequence:
- fd = socket(hvsocket)
- fd_out = dup(fd)
- fd_in = dup(fd)
- start a writer thread that writes data to fd_out with a combination of
epoll_wait(fd_out, EPOLLOUT) and
- start a reader thread that reads data from fd_in with a combination of
epoll_wait(fd_in, EPOLLIN)
- On the host, there are two threads that are reading/writing data to the
hvsocket
stack:
hvs_stream_has_space
hvs_notify_poll_out
vsock_poll
sock_poll
ep_poll
Race condition:
check for epollout from ep_poll():
assume no writable space in the socket
hvs_stream_has_space() returns 0
check for epollin from ep_poll():
assume socket has some free space < HVS_PKT_LEN(HVS_SEND_BUF_SIZE)
hvs_stream_has_space() will clear the channel pending send size
host will not notify the guest because the pending send size has
been cleared and so the hvsocket will never mark the
socket writable
Now, the EPOLLOUT will never return even if the socket write buffer is
empty.
The fix is to set the pending size to the default size and never change it.
This way the host will always notify the guest whenever the writable space
is bigger than the pending size. The host is already optimized to *only*
notify the guest when the pending size threshold boundary is crossed and
not everytime.
This change also reduces the cpu usage somewhat since hv_stream_has_space()
is in the hotpath of send:
vsock_stream_sendmsg()->hv_stream_has_space()
Earlier hv_stream_has_space was setting/clearing the pending size on every
call.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes an issue where TX Timestamps are not arriving on the error queue
when UDP_SEGMENT CMSG type is combined with CMSG type SO_TIMESTAMPING.
This can be illustrated with an updated updgso_bench_tx program which
includes the '-T' option to test for this condition. It also introduces
the '-P' option which will call poll() before reading the error queue.
./udpgso_bench_tx -4ucTPv -S 1472 -l2 -D 172.16.120.18
poll timeout
udp tx: 0 MB/s 1 calls/s 1 msg/s
The "poll timeout" message above indicates that TX timestamp never
arrived.
This patch preserves tx_flags for the first UDP GSO segment. Only the
first segment is timestamped, even though in some cases there may be
benefital in timestamping both the first and last segment.
Factors in deciding on first segment timestamp only:
- Timestamping both first and last segmented is not feasible. Hardware
can only have one outstanding TS request at a time.
- Timestamping last segment may under report network latency of the
previous segments. Even though the doorbell is suppressed, the ring
producer counter has been incremented.
- Timestamping the first segment has the upside in that it reports
timestamps from the application's view, e.g. RTT.
- Timestamping the first segment has the downside that it may
underreport tx host network latency. It appears that we have to pick
one or the other. And possibly follow-up with a config flag to choose
behavior.
v2: Remove tests as noted by Willem de Bruijn <willemb@google.com>
Moving tests from net to net-next
v3: Update only relevant tx_flag bits as per
Willem de Bruijn <willemb@google.com>
v4: Update comments and commit message as per
Willem de Bruijn <willemb@google.com>
Fixes: ee80d1ebe5ba ("udp: add udp gso")
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Brendan reports that the use of netem's packet corruption capability
leads to strange crashes. This seems to be caused by
commit d66280b12bd7 ("net: netem: use a list in addition to rbtree")
which uses skb->next pointer to construct a fast-path queue of
in-order skbs.
Packet corruption code has to invoke skb_gso_segment() in case
of skbs in need of GSO. skb_gso_segment() returns a list of
skbs. If next pointers of the skbs on that list do not get cleared
fast path list may point to freed skbs or skbs which are also on
the RB tree.
Let's say skb gets segmented into 3 frames:
A -> B -> C
A gets hooked to the t_head t_tail list by tfifo_enqueue(), but it's
next pointer didn't get cleared so we have:
h t
|/
A -> B -> C
Now if B and C get also get enqueued successfully all is fine, because
tfifo_enqueue() will overwrite the list in order. IOW:
Enqueue B:
h t
| |
A -> B C
Enqueue C:
h t
| |
A -> B -> C
But if B and C get reordered we may end up with:
h t RB tree
|/ |
A -> B -> C B
\
C
Or if they get dropped just:
h t
|/
A -> B -> C
where A and B are already freed.
To reproduce either limit has to be set low to cause freeing of
segs or reorders have to happen (due to delay jitter).
Note that we only have to mark the first segment as not on the
list, "finish_segs" handling of other frags already does that.
Another caveat is that qdisc_drop_all() still has to free all
segments correctly in case of drop of first segment, therefore
we re-link segs before calling it.
v2:
- re-link before drop, v1 was leaking non-first segs if limit
was hit at the first seg
- better commit message which lead to discovering the above :)
Reported-by: Brendan Galloway <brendan.galloway@netronome.com>
Fixes: d66280b12bd7 ("net: netem: use a list in addition to rbtree")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When GSO frame has to be corrupted netem uses skb_gso_segment()
to produce the list of frames, and re-enqueues the segments one
by one. The backlog length has to be adjusted to account for
new frames.
The current calculation is incorrect, leading to wrong backlog
lengths in the parent qdisc (both bytes and packets), and
incorrect packet backlog count in netem itself.
Parent backlog goes negative, netem's packet backlog counts
all non-first segments twice (thus remaining non-zero even
after qdisc is emptied).
Move the variables used to count the adjustment into local
scope to make 100% sure they aren't used at any stage in
backports.
Fixes: 6071bd1aa13e ("netem: Segment GSO packets on enqueue")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
udp_tunnel(6)_xmit_skb() called by tipc_udp_xmit() expects a tunnel device
to count packets on dev->tstats, a perpcu variable. However, TIPC is using
udp tunnel with no tunnel device, and pass the lower dev, like veth device
that only initializes dev->lstats(a perpcu variable) when creating it.
Later iptunnel_xmit_stats() called by ip(6)tunnel_xmit() thinks the dev as
a tunnel device, and uses dev->tstats instead of dev->lstats. tstats' each
pointer points to a bigger struct than lstats, so when tstats->tx_bytes is
increased, other percpu variable's members could be overwritten.
syzbot has reported quite a few crashes due to fib_nh_common percpu member
'nhc_pcpu_rth_output' overwritten, call traces are like:
BUG: KASAN: slab-out-of-bounds in rt_cache_valid+0x158/0x190
net/ipv4/route.c:1556
rt_cache_valid+0x158/0x190 net/ipv4/route.c:1556
__mkroute_output net/ipv4/route.c:2332 [inline]
ip_route_output_key_hash_rcu+0x819/0x2d50 net/ipv4/route.c:2564
ip_route_output_key_hash+0x1ef/0x360 net/ipv4/route.c:2393
__ip_route_output_key include/net/route.h:125 [inline]
ip_route_output_flow+0x28/0xc0 net/ipv4/route.c:2651
ip_route_output_key include/net/route.h:135 [inline]
...
or:
kasan: GPF could be caused by NULL-ptr deref or user memory access
RIP: 0010:dst_dev_put+0x24/0x290 net/core/dst.c:168
<IRQ>
rt_fibinfo_free_cpus net/ipv4/fib_semantics.c:200 [inline]
free_fib_info_rcu+0x2e1/0x490 net/ipv4/fib_semantics.c:217
__rcu_reclaim kernel/rcu/rcu.h:240 [inline]
rcu_do_batch kernel/rcu/tree.c:2437 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2716 [inline]
rcu_process_callbacks+0x100a/0x1ac0 kernel/rcu/tree.c:2697
...
The issue exists since tunnel stats update is moved to iptunnel_xmit by
Commit 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()"),
and here to fix it by passing a NULL tunnel dev to udp_tunnel(6)_xmit_skb
so that the packets counting won't happen on dev->tstats.
Reported-by: syzbot+9d4c12bfd45a58738d0a@syzkaller.appspotmail.com
Reported-by: syzbot+a9e23ea2aa21044c2798@syzkaller.appspotmail.com
Reported-by: syzbot+c4c4b2bb358bb936ad7e@syzkaller.appspotmail.com
Reported-by: syzbot+0290d2290a607e035ba1@syzkaller.appspotmail.com
Reported-by: syzbot+a43d8d4e7e8a7a9e149e@syzkaller.appspotmail.com
Reported-by: syzbot+a47c5f4c6c00fc1ed16e@syzkaller.appspotmail.com
Fixes: 039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
iptunnel_xmit() works as a common function, also used by a udp tunnel
which doesn't have to have a tunnel device, like how TIPC works with
udp media.
In these cases, we should allow not to count pkts on dev's tstats, so
that udp tunnel can work with no tunnel device safely.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
in IPoIB case we can't see a VF broadcast address for but
can see for PF
Before:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 MAC 14:80:00:00:66:fe, spoof checking off, link-state disable,
trust off, query_rss off
...
After:
11: ib1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 256
link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband
80:00:00:66:fe:80:00:00:00:00:00:00:24:8a:07:03:00:a4:3e:7c brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof
checking off, link-state disable, trust off, query_rss off
v1->v2: add the IFLA_VF_BROADCAST constant
v2->v3: put IFLA_VF_BROADCAST at the end
to avoid KABI breakage and set NLA_REJECT
dev_setlink
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In sock_getsockopt(), 'optlen' is fetched the first time from userspace.
'len < 0' is then checked. Then in condition 'SO_MEMINFO', 'optlen' is
fetched the second time from userspace.
If change it between two fetches may cause security problems or unexpected
behaivor, and there is no reason to fetch it a second time.
To fix this, we need to remove the second fetch.
Signed-off-by: JingYi Hou <houjingyi647@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It appears that a FAILOVER_MSG can come from peer even when the failure
link is resetting (i.e. just after the 'node_write_unlock()'...). This
means the failover procedure on the node has not been started yet.
The situation is as follows:
node1 node2
linkb linka linka linkb
| | | |
| | x failure |
| | RESETTING |
| | | |
| x failure RESET |
| RESETTING FAILINGOVER |
| | (FAILOVER_MSG) | |
|<-------------------------------------------------|
| *FAILINGOVER | | |
| | (dummy FAILOVER_MSG) | |
|------------------------------------------------->|
| RESET | | FAILOVER_END
| FAILINGOVER RESET |
. . . .
. . . .
. . . .
Once this happens, the link failover procedure will be triggered
wrongly on the receiving node since the node isn't in FAILINGOVER state
but then another link failover will be carried out.
The consequences are:
1) A peer might get stuck in FAILINGOVER state because the 'sync_point'
was set, reset and set incorrectly, the criteria to end the failover
would not be met, it could keep waiting for a message that has already
received.
2) The early FAILOVER_MSG(s) could be queued in the link failover
deferdq but would be purged or not pulled out because the 'drop_point'
was not set correctly.
3) The early FAILOVER_MSG(s) could be dropped too.
4) The dummy FAILOVER_MSG could make the peer leaving FAILINGOVER state
shortly, but later on it would be restarted.
The same situation can also happen when the link is in PEER_RESET state
and a FAILOVER_MSG arrives.
The commit resolves the issues by forcing the link down immediately, so
the failover procedure will be started normally (which is the same as
when receiving a FAILOVER_MSG and the link is in up state).
Also, the function "tipc_node_link_failover()" is toughen to avoid such
a situation from happening.
Acked-by: Jon Maloy <jon.maloy@ericsson.se>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both listeners - mlxsw and netdevsim - of IPv6 FIB notifications are now
ready to handle IPv6 multipath notifications.
Therefore, stop ignoring such notifications in both drivers and stop
sending notification for each added / deleted nexthop.
v2:
* Remove 'multipath_rt' from 'struct fib6_entry_notifier_info'
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If all the nexthops of a multipath route are being deleted, send one
notification for the entire route, instead of one per-nexthop.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Emit a notification when a multipath routes is added or replace.
Note that unlike the replace notifications sent from fib6_add_rt2node(),
it is possible we are sending a 'FIB_EVENT_ENTRY_REPLACE' when a route
was merely added and not replaced.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the IPv6 FIB notifier info with number of sibling routes being
notified.
This will later allow listeners to process one notification for a
multipath routes instead of N, where N is the number of nexthops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Honestly all the conflicts were simple overlapping changes,
nothing really interesting to report.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Causes crash when lifetime expires on an adress as garbage is
dereferenced soon after.
This used to look like this:
for (ifap = &ifa->ifa_dev->ifa_list;
*ifap != NULL; ifap = &(*ifap)->ifa_next) {
if (*ifap == ifa) ...
but this was changed to:
struct in_ifaddr *tmp;
ifap = &ifa->ifa_dev->ifa_list;
tmp = rtnl_dereference(*ifap);
while (tmp) {
tmp = rtnl_dereference(tmp->ifa_next); // Bogus
if (rtnl_dereference(*ifap) == ifa) {
...
ifap = &tmp->ifa_next; // Can be NULL
tmp = rtnl_dereference(*ifap); // Dereference
}
}
Remove the bogus assigment/list entry skip.
Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
"Lots of bug fixes here:
1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer.
2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John
Crispin.
3) Use after free in psock backlog workqueue, from John Fastabend.
4) Fix source port matching in fdb peer flow rule of mlx5, from Raed
Salem.
5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet.
6) Network header needs to be set for packet redirect in nfp, from
John Hurley.
7) Fix udp zerocopy refcnt, from Willem de Bruijn.
8) Don't assume linear buffers in vxlan and geneve error handlers,
from Stefano Brivio.
9) Fix TOS matching in mlxsw, from Jiri Pirko.
10) More SCTP cookie memory leak fixes, from Neil Horman.
11) Fix VLAN filtering in rtl8366, from Linus Walluij.
12) Various TCP SACK payload size and fragmentation memory limit fixes
from Eric Dumazet.
13) Use after free in pneigh_get_next(), also from Eric Dumazet.
14) LAPB control block leak fix from Jeremy Sowden"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits)
lapb: fixed leak of control-blocks.
tipc: purge deferredq list for each grp member in tipc_group_delete
ax25: fix inconsistent lock state in ax25_destroy_timer
neigh: fix use-after-free read in pneigh_get_next
tcp: fix compile error if !CONFIG_SYSCTL
hv_sock: Suppress bogus "may be used uninitialized" warnings
be2net: Fix number of Rx queues used for flow hashing
net: handle 802.1P vlan 0 packets properly
tcp: enforce tcp_min_snd_mss in tcp_mtu_probing()
tcp: add tcp_min_snd_mss sysctl
tcp: tcp_fragment() should apply sane memory limits
tcp: limit payload size of sacked skbs
Revert "net: phylink: set the autoneg state in phylink_phy_change"
bpf: fix nested bpf tracepoints with per-cpu data
bpf: Fix out of bounds memory access in bpf_sk_storage
vsock/virtio: set SOCK_DONE on peer shutdown
net: dsa: rtl8366: Fix up VLAN filtering
net: phylink: set the autoneg state in phylink_phy_change
net: add high_order_alloc_disable sysctl/static key
tcp: add tcp_tx_skb_cache sysctl
...
|
|
The bpf_ipv6_fib_lookup function should return BPF_FIB_LKUP_RET_FWD_DISABLED
when forwarding is disabled for the input device. However instead of checking
if forwarding is enabled on the input device, it checked the global
net->ipv6.devconf_all->forwarding flag. Change it to behave as expected.
Fixes: 87f5fc7e48dd ("bpf: Provide helper to do forwarding lookups in kernel FIB table")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Currently user is unable to delete the filter. See following example:
$ tc filter add dev ens16np1 ingress pref 1 handle 1 matchall action drop
$ tc filter show dev ens16np1 ingress
filter protocol all pref 1 matchall chain 0
filter protocol all pref 1 matchall chain 0 handle 0x1
in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
$ tc filter del dev ens16np1 ingress pref 1 handle 1 matchall action drop
RTNETLINK answers: Operation not supported
Implement tcf_proto_ops->delete() op and allow user to delete the filter.
Reported-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix nla_policy definition by specifying an exact length type attribute
to CTINFO action paraneter block structure. Without this change,
netlink parsing will fail validation and the action will not be
instantiated.
8cb081746c03 ("netlink: make validation more configurable for future")
introduced much stricter checking to attributes being passed via
netlink. Existing actions were updated to use less restrictive
deprecated versions of nla_parse_nested.
As a new module, act_ctinfo should be designed to use the strict
checking model otherwise, well, what was the point of implementing it.
Confession time: Until very recently, development of this module has
been done on 'net-next' tree to 'clean compile' level with run-time
testing on backports to 4.14 & 4.19 kernels under openwrt. This is how
I managed to miss the run-time impacts of the new strict
nla_parse_nested function. I hopefully have learned something from this
(glances toward laptop running a net-next kernel)
There is however a still outstanding implication on iproute2 user space
in that it needs to be told to pass nested netlink messages with the
nested attribute actually set. So even with this kernel fix to do
things correctly you still cannot instantiate a new 'strict'
nla_parse_nested based action such as act_ctinfo with iproute2's tc.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use correct return value on action creation: ACT_P_CREATED.
The use of incorrect return value could result in a situation where the
system thought a ctinfo module was listening but actually wasn't
instantiated correctly leading to an OOPS in tcf_generic_walker().
Confession time: Until very recently, development of this module has
been done on 'net-next' tree to 'clean compile' level with run-time
testing on backports to 4.14 & 4.19 kernels under openwrt. During the
back & forward porting during development & testing, the critical
ACT_P_CREATED return code got missed despite being in the 4.14 & 4.19
backports. I have now gone through the init functions, using act_csum
as reference with a fine toothed comb. Bonus, no more OOPSes. I
managed to also miss this issue till now due to the new strict
nla_parse_nested function failing validation before action creation.
As an inexperienced developer I've learned that
copy/pasting/backporting/forward porting code correctly is hard. If I
ever get to a developer conference I shall don the cone of shame.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using a bare block cipher in non-crypto code is almost always a bad idea,
not only for security reasons (and we've seen some examples of this in
the kernel in the past), but also for performance reasons.
In the TCP fastopen case, we call into the bare AES block cipher one or
two times (depending on whether the connection is IPv4 or IPv6). On most
systems, this results in a call chain such as
crypto_cipher_encrypt_one(ctx, dst, src)
crypto_cipher_crt(tfm)->cit_encrypt_one(crypto_cipher_tfm(tfm), ...);
aesni_encrypt
kernel_fpu_begin();
aesni_enc(ctx, dst, src); // asm routine
kernel_fpu_end();
It is highly unlikely that the use of special AES instructions has a
benefit in this case, especially since we are doing the above twice
for IPv6 connections, instead of using a transform which can process
the entire input in one go.
We could switch to the cbcmac(aes) shash, which would at least get
rid of the duplicated overhead in *some* cases (i.e., today, only
arm64 has an accelerated implementation of cbcmac(aes), while x86 will
end up using the generic cbcmac template wrapping the AES-NI cipher,
which basically ends up doing exactly the above). However, in the given
context, it makes more sense to use a light-weight MAC algorithm that
is more suitable for the purpose at hand, such as SipHash.
Since the output size of SipHash already matches our chosen value for
TCP_FASTOPEN_COOKIE_SIZE, and given that it accepts arbitrary input
sizes, this greatly simplifies the code as well.
NOTE: Server farms backing a single server IP for load balancing purposes
and sharing a single fastopen key will be adversely affected by
this change unless all systems in the pool receive their kernel
upgrades at the same time.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In patch series, commit 9195948fbf34 ("tipc: improve TIPC throughput by
Gap ACK blocks"), as for simplicity, the repeated retransmit failures'
detection in the function - "tipc_link_retrans()" was kept there for
broadcast retransmissions only.
This commit now reapplies this feature for link unicast retransmissions
that has been done via the function - "tipc_link_advance_transmq()".
Also, the "tipc_link_retrans()" is renamed to "tipc_link_bc_retrans()"
as it is used only for broadcast.
Acked-by: Jon Maloy <jon.maloy@ericsson.se>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
tcp: make sack processing more robust
Jonathan Looney brought to our attention multiple problems
in TCP stack at the sender side.
SACK processing can be abused by malicious peers to either
cause overflows, or increase of memory usage.
First two patches fix the immediate problems.
Since the malicious peers abuse senders by advertizing a very
small MSS in their SYN or SYNACK packet, the last two
patches add a new sysctl so that admins can chose a higher
limit for MSS clamping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add common functions into nf_synproxy_core.c to prepare for nftables support.
The prototypes of the functions used by {ipt, ip6t}_SYNPROXY are in the new
file nf_synproxy.h
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This is a prerequisite for the infrastructure module NETFILTER_SYNPROXY.
The new module is needed to avoid duplicated code for the SYNPROXY
nftables support.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Jozsef Kadlecsik says:
====================
ipset patches for nf-next
- Remove useless memset() calls, nla_parse_nested/nla_parse
erase the tb array properly, from Florent Fourcot.
- Merge the uadd and udel functions, the code is nicer
this way, also from Florent Fourcot.
- Add a missing check for the return value of a
nla_parse[_deprecated] call, from Aditya Pakki.
- Add the last missing check for the return value
of nla_parse[_deprecated] call.
- Fix error path and release the references properly
in set_target_v3_checkentry().
- Fix memory accounting which is reported to userspace
for hash types on resize, from Stefano Brivio.
- Update my email address to kadlec@netfilter.org.
The patch covers all places in the source tree where
my kadlec@blackhole.kfki.hu address could be found.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, the /proc/sys/net/bridge folder is only created in the initial
network namespace. This patch ensures that the /proc/sys/net/bridge folder
is available in each network namespace if the module is loaded and
disappears from all network namespaces when the module is unloaded.
In doing so the patch makes the sysctls:
bridge-nf-call-arptables
bridge-nf-call-ip6tables
bridge-nf-call-iptables
bridge-nf-filter-pppoe-tagged
bridge-nf-filter-vlan-tagged
bridge-nf-pass-vlan-input-dev
apply per network namespace. This unblocks some use-cases where users would
like to e.g. not do bridge filtering for bridges in a specific network
namespace while doing so for bridges located in another network namespace.
The netfilter rules are afaict already per network namespace so it should
be safe for users to specify whether bridge devices inside a network
namespace are supposed to go through iptables et al. or not. Also, this can
already be done per-bridge by setting an option for each individual bridge
via Netlink. It should also be possible to do this for all bridges in a
network namespace via sysctls.
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This ports the sysctls to use struct brnf_net.
With this patch we make it possible to namespace the br_netfilter module in
the following patch.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Reject flags that are not supported with EINVAL.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
____nf_conntrack_find() performs checks on the conntrack objects in
this order:
1. if (nf_ct_is_expired(ct))
This fetches ct->timeout, in third cache line.
The hnnode that is used to store the list pointers resides in the first
(origin) or second (reply tuple) cache lines.
This test rarely passes, but its necessary to reap obsolete entries.
2. if (nf_ct_is_dying(ct))
This fetches ct->status, also in third cache line.
The test is useless, and can be removed:
Consider:
cpu0 cpu1
ct = ____nf_conntrack_find()
atomic_inc_not_zero(ct) -> ok
nf_ct_key_equal -> ok
is_dying -> DYING bit not set, ok
set_bit(ct, DYING);
... unhash ... etc.
return ct
-> returning a ct with dying bit set, despite
having a test for it.
This (unlikely) case is fine - refcount prevents ct from getting free'd.
3. if (nf_ct_key_equal(h, tuple, zone, net))
nf_ct_key_equal checks in following order:
1. Tuple equal (first or second cacheline)
2. Zone equal (third cacheline)
3. confirmed bit set (->status, third cacheline)
4. net namespace match (third cacheline).
Swapping "timeout" and "cpu" places timeout in the first cacheline.
This has two advantages:
1. For a conntrack that won't even match the original tuple,
we will now only fetch the first and maybe the second cacheline
instead of always accessing the 3rd one as well.
2. in case of TCP ct->timeout changes frequently because we
reduce/increase it when there are packets outstanding in the network.
The first cacheline contains both the reference count and the ct spinlock,
i.e. moving timeout there avoids writes to 3rd cacheline.
The restart sequence in __nf_conntrack_find() is removed, if we found a
candidate, but then fail to increment the refcount or discover the tuple
has changed (object recycling), just pretend we did not find an entry.
A second lookup won't find anything until another CPU adds a new conntrack
with identical tuple into the hash table, which is very unlikely.
We have the confirmation-time checks (when we hold hash lock) that deal
with identical entries and even perform clash resolution in some cases.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch allows to add, list and delete expectations via nft objref
infrastructure and assigning these expectations via nft rule.
This allows manual port triggering when no helper is defined to manage a
specific protocol. For example, if I have an online game which protocol
is based on initial connection to TCP port 9753 of the server, and where
the server opens a connection to port 9876, I can set rules as follow:
table ip filter {
ct expectation mygame {
protocol udp;
dport 9876;
timeout 2m;
size 1;
}
chain input {
type filter hook input priority 0; policy drop;
tcp dport 9753 ct expectation set "mygame";
}
chain output {
type filter hook output priority 0; policy drop;
udp dport 9876 ct status expected accept;
}
}
Signed-off-by: Stéphane Veyret <sveyret@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
After commit b38ff4075a80, the following command does not work anymore:
$ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \
mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \
'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4
In fact, the selector is not mandatory, allow the user to provide an empty
selector.
Fixes: b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation")
CC: Anirudh Gupta <anirudh.gupta@sophos.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
lapb_register calls lapb_create_cb, which initializes the control-
block's ref-count to one, and __lapb_insert_cb, which increments it when
adding the new block to the list of blocks.
lapb_unregister calls __lapb_remove_cb, which decrements the ref-count
when removing control-block from the list of blocks, and calls lapb_put
itself to decrement the ref-count before returning.
However, lapb_unregister also calls __lapb_devtostruct to look up the
right control-block for the given net_device, and __lapb_devtostruct
also bumps the ref-count, which means that when lapb_unregister returns
the ref-count is still 1 and the control-block is leaked.
Call lapb_put after __lapb_devtostruct to fix leak.
Reported-by: syzbot+afb980676c836b4a0afa@syzkaller.appspotmail.com
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzbot reported a memleak caused by grp members' deferredq list not
purged when the grp is be deleted.
The issue occurs when more(msg_grp_bc_seqno(hdr), m->bc_rcv_nxt) in
tipc_group_filter_msg() and the skb will stay in deferredq.
So fix it by calling __skb_queue_purge for each member's deferredq
in tipc_group_delete() when a tipc sk leaves the grp.
Fixes: b87a5ea31c93 ("tipc: guarantee group unicast doesn't bypass group broadcast")
Reported-by: syzbot+78fbe679c8ca8d264a8d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
