summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2023-01-30devlink: remove devlink featuresJiri Pirko
Devlink features were introduced to disallow devlink reload calls of userspace before the devlink was fully initialized. The reason for this workaround was the fact that devlink reload was originally called without devlink instance lock held. However, with recent changes that converted devlink reload to be performed under devlink instance lock, this is redundant so remove devlink features entirely. Note that mlx5 used this to enable devlink reload conditionally only when device didn't act as multi port slave. Move the multi port check into mlx5_devlink_reload_down() callback alongside with the other checks preventing the device from reload in certain states. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30devlink: send objects notifications during devlink reloadJiri Pirko
Currently, the notifications are only sent for params. People who introduced other objects forgot to add the reload notifications here. To make sure all notifications happen according to existing comment, benefit from existence of devlink_notify_register/unregister() helpers and use them in reload code. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30devlink: move devlink reload notifications back in between _down() and _up() ↵Jiri Pirko
calls This effectively reverts commit 05a7f4a8dff1 ("devlink: Break parameter notification sequence to be before/after unload/load driver"). Cited commit resolved a problem in mlx5 params implementation, when param notification code accessed memory previously freed during reload. Now, when the params can be registered and unregistered when devlink instance is registered, mlx5 code unregisters the problematic param during devlink reload. The fix is therefore no longer needed. Current behavior is a it problematic, as it sends DEL notifications even in potential case when reload_down() call fails which might confuse userspace notifications listener. So move the reload notifications back where they were originally in between reload_down() and reload_up() calls. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-30Merge tag 'batadv-next-pullrequest-20230127' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop prandom.h includes, by Sven Eckelmann - fix mailing list address, by Sven Eckelmann - multicast feature preparation, by Linus Lüssing (2 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-28Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2023-01-28 We've added 124 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 6386 insertions(+), 1827 deletions(-). The main changes are: 1) Implement XDP hints via kfuncs with initial support for RX hash and timestamp metadata kfuncs, from Stanislav Fomichev and Toke Høiland-Jørgensen. Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk 2) Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case, from Andrii Nakryiko. 3) Significantly reduce the search time for module symbols by livepatch and BPF, from Jiri Olsa and Zhen Lei. 4) Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals, from David Vernet. 5) Fix several issues in the dynptr processing such as stack slot liveness propagation, missing checks for PTR_TO_STACK variable offset, etc, from Kumar Kartikeya Dwivedi. 6) Various performance improvements, fixes, and introduction of more than just one XDP program to XSK selftests, from Magnus Karlsson. 7) Big batch to BPF samples to reduce deprecated functionality, from Daniel T. Lee. 8) Enable struct_ops programs to be sleepable in verifier, from David Vernet. 9) Reduce pr_warn() noise on BTF mismatches when they are expected under the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien. 10) Describe modulo and division by zero behavior of the BPF runtime in BPF's instruction specification document, from Dave Thaler. 11) Several improvements to libbpf API documentation in libbpf.h, from Grant Seltzer. 12) Improve resolve_btfids header dependencies related to subcmd and add proper support for HOSTCC, from Ian Rogers. 13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room() helper along with BPF selftests, from Ziyang Xuan. 14) Simplify the parsing logic of structure parameters for BPF trampoline in the x86-64 JIT compiler, from Pu Lehui. 15) Get BTF working for kernels with CONFIG_RUST enabled by excluding Rust compilation units with pahole, from Martin Rodriguez Reboredo. 16) Get bpf_setsockopt() working for kTLS on top of TCP sockets, from Kui-Feng Lee. 17) Disable stack protection for BPF objects in bpftool given BPF backends don't support it, from Holger Hoffstätte. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits) selftest/bpf: Make crashes more debuggable in test_progs libbpf: Add documentation to map pinning API functions libbpf: Fix malformed documentation formatting selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket. bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt(). bpf/selftests: Verify struct_ops prog sleepable behavior bpf: Pass const struct bpf_prog * to .check_member libbpf: Support sleepable struct_ops.s section bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable selftests/bpf: Fix vmtest static compilation error tools/resolve_btfids: Alter how HOSTCC is forced tools/resolve_btfids: Install subcmd headers bpf/docs: Document the nocast aliasing behavior of ___init bpf/docs: Document how nested trusted fields may be defined bpf/docs: Document cpumask kfuncs in a new file selftests/bpf: Add selftest suite for cpumask kfuncs selftests/bpf: Add nested trust selftests suite bpf: Enable cpumasks to be queried and used as kptrs bpf: Disallow NULLable pointers for trusted kfuncs ... ==================== Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27netpoll: Remove 4s sleep during carrier detectionBreno Leitao
This patch removes the msleep(4s) during netpoll_setup() if the carrier appears instantly. Here are some scenarios where this workaround is counter-productive in modern ages: Servers which have BMC communicating over NC-SI via the same NIC as gets used for netconsole. BMC will keep the PHY up, hence the carrier appearing instantly. The link is fibre, SERDES getting sync could happen within 0.1Hz, and the carrier also appears instantly. Other than that, if a driver is reporting instant carrier and then losing it, this is probably a driver bug. Reported-by: Michael van der Westhuizen <rmikey@meta.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20230125185230.3574681-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-27devlink: protect devlink param list by instance lockJiri Pirko
Commit 1d18bb1a4ddd ("devlink: allow registering parameters after the instance") as the subject implies introduced possibility to register devlink params even for already registered devlink instance. This is a bit problematic, as the consistency or params list was originally secured by the fact it is static during devlink lifetime. So in order to protect the params list, take devlink instance lock during the params operations. Introduce unlocked function variants and use them in drivers in locked context. Put lock assertions to appropriate places. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27devlink: put couple of WARN_ONs in devlink_param_driverinit_value_get()Jiri Pirko
Put couple of WARN_ONs in devlink_param_driverinit_value_get() function to clearly indicate, that it is a driver bug if used without reload support or for non-driverinit param. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27devlink: make devlink_param_driverinit_value_set() return voidJiri Pirko
devlink_param_driverinit_value_set() currently returns int with possible error, but no user is checking it anyway. The only reason for a fail is a driver bug. So convert the function to return void and put WARN_ONs on error paths. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27devlink: don't work with possible NULL pointer in devlink_param_unregister()Jiri Pirko
There is a WARN_ON checking the param_item for being NULL when the param is not inserted in the list. That indicates a driver BUG. Instead of continuing to work with NULL pointer with its consequences, return. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27devlink: make devlink_param_register/unregister staticJiri Pirko
There is no user outside the devlink code, so remove the export and make the functions static. Move them before callers to avoid forward declarations. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27ethtool: netlink: convert commands to common SETJakub Kicinski
Convert all SET commands where new common code is applicable. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27ethtool: netlink: handle SET intro/outro in the common codeJakub Kicinski
Most ethtool SET callbacks follow the same general structure. ethnl_parse_header_dev_get() rtnl_lock() ethnl_ops_begin() ... do stuff ... ethtool_notify() ethnl_ops_complete() rtnl_unlock() ethnl_parse_header_dev_put() This leads to a lot of copy / pasted code an bugs when people mis-handle the error path. Add a generic implementation of this pattern with a .set callback in struct ethnl_request_ops called to "do stuff". Also add an optional .set_validate which is called before ethnl_ops_begin() -- a lot of implementations do basic request capability / sanity checking at that point. Because we want to avoid generating the notification when no change happened - adopt a slightly hairy return values: - 0 means nothing to do (no notification) - 1 means done / continue - negative error codes on error Reuse .hdr_attr from struct ethnl_request_ops, GET and SET use the same attr spaces in all cases. Convert pause as an example (and to avoid unused function warnings). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27net: add missing includes of linux/splice.hJakub Kicinski
Number of files depend on linux/splice.h getting included by linux/skbuff.h which soon will no longer be the case. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27net: add missing includes of linux/sched/clock.hJakub Kicinski
Number of files depend on linux/sched/clock.h getting included by linux/skbuff.h which soon will no longer be the case. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27net: skbuff: drop the linux/textsearch.h includeJakub Kicinski
This include was added for skb_find_text() but all we need there is a forward declaration of struct ts_config. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-26xfrm: extend add state callback to set failure reasonLeon Romanovsky
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-26xfrm: extend add policy callback to set failure reasonLeon Romanovsky
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-26mptcp: userspace pm: use a single point of exitMatthieu Baerts
Like in all other functions in this file, a single point of exit is used when extra operations are needed: unlock, decrement refcount, etc. There is no functional change for the moment but it is better to do the same here to make sure all cleanups are done in case of intermediate errors. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-26mptcp: propagate sk_ipv6only to subflowsMatthieu Baerts
Usually, attributes are propagated to subflows as well. Here, if subflows are created by other ways than the MPTCP path-manager, it is important to make sure they are in v6 if it is asked by the userspace. Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-26mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addressesPaolo Abeni
Currently the in-kernel PM arbitrary enforces that created subflow's family must match the main MPTCP socket while the RFC allows mixing IPv4 and IPv6 subflows. This patch changes the in-kernel PM logic to create subflows matching the currently selected source (or destination) address. IPv4 sockets can pick only IPv4 addresses (and v4 mapped in v6), while IPv6 sockets not restricted to V6ONLY can pick either IPv4 and IPv6 addresses as long as the source and destination matches. A helper, previously introduced is used to ease family matching checks, taking care of IPv4 vs IPv4-mapped-IPv6 vs IPv6 only addresses. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/269 Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-26icmp: Add counters for rate limitsJamie Bainbridge
There are multiple ICMP rate limiting mechanisms: * Global limits: net.ipv4.icmp_msgs_burst/icmp_msgs_per_sec * v4 per-host limits: net.ipv4.icmp_ratelimit/ratemask * v6 per-host limits: net.ipv6.icmp_ratelimit/ratemask However, when ICMP output is limited, there is no way to tell which limit has been hit or even if the limits are responsible for the lack of ICMP output. Add counters for each of the cases above. As we are within local_bh_disable(), use the __INC stats variant. Example output: # nstat -sz "*RateLimit*" IcmpOutRateLimitGlobal 134 0.0 IcmpOutRateLimitHost 770 0.0 Icmp6OutRateLimitHost 84 0.0 Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Suggested-by: Abhishek Rawal <rawal.abhishek92@gmail.com> Link: https://lore.kernel.org/r/273b32241e6b7fdc5c609e6f5ebc68caf3994342.1674605770.git.jamie.bainbridge@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-25inet: Add IP_LOCAL_PORT_RANGE socket optionJakub Sitnicki
Users who want to share a single public IP address for outgoing connections between several hosts traditionally reach for SNAT. However, SNAT requires state keeping on the node(s) performing the NAT. A stateless alternative exists, where a single IP address used for egress can be shared between several hosts by partitioning the available ephemeral port range. In such a setup: 1. Each host gets assigned a disjoint range of ephemeral ports. 2. Applications open connections from the host-assigned port range. 3. Return traffic gets routed to the host based on both, the destination IP and the destination port. An application which wants to open an outgoing connection (connect) from a given port range today can choose between two solutions: 1. Manually pick the source port by bind()'ing to it before connect()'ing the socket. This approach has a couple of downsides: a) Search for a free port has to be implemented in the user-space. If the chosen 4-tuple happens to be busy, the application needs to retry from a different local port number. Detecting if 4-tuple is busy can be either easy (TCP) or hard (UDP). In TCP case, the application simply has to check if connect() returned an error (EADDRNOTAVAIL). That is assuming that the local port sharing was enabled (REUSEADDR) by all the sockets. # Assume desired local port range is 60_000-60_511 s = socket(AF_INET, SOCK_STREAM) s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s.bind(("192.0.2.1", 60_000)) s.connect(("1.1.1.1", 53)) # Fails only if 192.0.2.1:60000 -> 1.1.1.1:53 is busy # Application must retry with another local port In case of UDP, the network stack allows binding more than one socket to the same 4-tuple, when local port sharing is enabled (REUSEADDR). Hence detecting the conflict is much harder and involves querying sock_diag and toggling the REUSEADDR flag [1]. b) For TCP, bind()-ing to a port within the ephemeral port range means that no connecting sockets, that is those which leave it to the network stack to find a free local port at connect() time, can use the this port. IOW, the bind hash bucket tb->fastreuse will be 0 or 1, and the port will be skipped during the free port search at connect() time. 2. Isolate the app in a dedicated netns and use the use the per-netns ip_local_port_range sysctl to adjust the ephemeral port range bounds. The per-netns setting affects all sockets, so this approach can be used only if: - there is just one egress IP address, or - the desired egress port range is the same for all egress IP addresses used by the application. For TCP, this approach avoids the downsides of (1). Free port search and 4-tuple conflict detection is done by the network stack: system("sysctl -w net.ipv4.ip_local_port_range='60000 60511'") s = socket(AF_INET, SOCK_STREAM) s.setsockopt(SOL_IP, IP_BIND_ADDRESS_NO_PORT, 1) s.bind(("192.0.2.1", 0)) s.connect(("1.1.1.1", 53)) # Fails if all 4-tuples 192.0.2.1:60000-60511 -> 1.1.1.1:53 are busy For UDP this approach has limited applicability. Setting the IP_BIND_ADDRESS_NO_PORT socket option does not result in local source port being shared with other connected UDP sockets. Hence relying on the network stack to find a free source port, limits the number of outgoing UDP flows from a single IP address down to the number of available ephemeral ports. To put it another way, partitioning the ephemeral port range between hosts using the existing Linux networking API is cumbersome. To address this use case, add a new socket option at the SOL_IP level, named IP_LOCAL_PORT_RANGE. The new option can be used to clamp down the ephemeral port range for each socket individually. The option can be used only to narrow down the per-netns local port range. If the per-socket range lies outside of the per-netns range, the latter takes precedence. UAPI-wise, the low and high range bounds are passed to the kernel as a pair of u16 values in host byte order packed into a u32. This avoids pointer passing. PORT_LO = 40_000 PORT_HI = 40_511 s = socket(AF_INET, SOCK_STREAM) v = struct.pack("I", PORT_HI << 16 | PORT_LO) s.setsockopt(SOL_IP, IP_LOCAL_PORT_RANGE, v) s.bind(("127.0.0.1", 0)) s.getsockname() # Local address between ("127.0.0.1", 40_000) and ("127.0.0.1", 40_511), # if there is a free port. EADDRINUSE otherwise. [1] https://github.com/cloudflare/cloudflare-blog/blob/232b432c1d57/2022-02-connectx/connectx.py#L116 Reviewed-by: Marek Majkowski <marek@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-25net: Kconfig: fix spellosRandy Dunlap
Fix spelling in net/ Kconfig files. (reported by codespell) Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@netfilter.org> Cc: Florian Westphal <fw@strlen.de> Cc: coreteam@netfilter.org Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jiri Pirko <jiri@resnulli.us> Link: https://lore.kernel.org/r/20230124181724.18166-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-25bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().Kui-Feng Lee
Resolve an issue when calling sol_tcp_sockopt() on a socket with ktls enabled. Prior to this patch, sol_tcp_sockopt() would only allow calls if the function pointer of setsockopt of the socket was set to tcp_setsockopt(). However, any socket with ktls enabled would have its function pointer set to tls_setsockopt(). To resolve this issue, the patch adds a check of the protocol of the linux socket and allows bpf_setsockopt() to be called if ktls is initialized on the linux socket. This ensures that calls to sol_tcp_sockopt() will succeed on sockets with ktls enabled. Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Link: https://lore.kernel.org/r/20230125201608.908230-2-kuifeng@meta.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-01-25bpf/selftests: Verify struct_ops prog sleepable behaviorDavid Vernet
In a set of prior changes, we added the ability for struct_ops programs to be sleepable. This patch enhances the dummy_st_ops selftest suite to validate this behavior by adding a new sleepable struct_ops entry to dummy_st_ops. Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230125164735.785732-5-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-25bpf: Pass const struct bpf_prog * to .check_memberDavid Vernet
The .check_member field of struct bpf_struct_ops is currently passed the member's btf_type via const struct btf_type *t, and a const struct btf_member *member. This allows the struct_ops implementation to check whether e.g. an ops is supported, but it would be useful to also enforce that the struct_ops prog being loaded for that member has other qualities, like being sleepable (or not). This patch therefore updates the .check_member() callback to also take a const struct bpf_prog *prog argument. Signed-off-by: David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20230125164735.785732-4-void@manifault.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-01-25net: mctp: mark socks as dead on unhash, prevent re-addJeremy Kerr
Once a socket has been unhashed, we want to prevent it from being re-used in a sk_key entry as part of a routing operation. This change marks the sk as SOCK_DEAD on unhash, which prevents addition into the net's key list. We need to do this during the key add path, rather than key lookup, as we release the net keys_lock between those operations. Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: hold key reference when looking up a general keyPaolo Abeni
Currently, we have a race where we look up a sock through a "general" (ie, not directly associated with the (src,dest,tag) tuple) key, then drop the key reference while still holding the key's sock. This change expands the key reference until we've finished using the sock, and hence the sock reference too. Commit message changes from Jeremy Kerr <jk@codeconstruct.com.au>. Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Fixes: 73c618456dc5 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: move expiry timer delete to unhashJeremy Kerr
Currently, we delete the key expiry timer (in sk->close) before unhashing the sk. This means that another thread may find the sk through its presence on the key list, and re-queue the timer. This change moves the timer deletion to the unhash, after we have made the key no longer observable, so the timer cannot be re-queued. Fixes: 7b14e15ae6f4 ("mctp: Implement a timeout for tags") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: mctp: add an explicit reference from a mctp_sk_key to sockJeremy Kerr
Currently, we correlate the mctp_sk_key lifetime to the sock lifetime through the sock hash/unhash operations, but this is pretty tenuous, and there are cases where we may have a temporary reference to an unhashed sk. This change makes the reference more explicit, by adding a hold on the sock when it's associated with a mctp_sk_key, released on final key unref. Fixes: 73c618456dc5 ("mctp: locking, lifetime and validity changes for sk_keys") Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ethtool: fix NULL pointer dereference in pause_prepare_data()Vladimir Oltean
In the following call path: ethnl_default_dumpit -> ethnl_default_dump_one -> ctx->ops->prepare_data -> pause_prepare_data struct genl_info *info will be passed as NULL, and pause_prepare_data() dereferences it while getting the extended ack pointer. To avoid that, just set the extack to NULL if "info" is NULL, since the netlink extack handling messages know how to deal with that. The pattern "info ? info->extack : NULL" is present in quite a few other "prepare_data" implementations, so it's clear that it's a more general problem to be dealt with at a higher level, but the code should have at least adhered to the current conventions to avoid the NULL dereference. Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reported-by: syzbot+9d44aae2720fc40b8474@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net: ethtool: fix NULL pointer dereference in stats_prepare_data()Vladimir Oltean
In the following call path: ethnl_default_dumpit -> ethnl_default_dump_one -> ctx->ops->prepare_data -> stats_prepare_data struct genl_info *info will be passed as NULL, and stats_prepare_data() dereferences it while getting the extended ack pointer. To avoid that, just set the extack to NULL if "info" is NULL, since the netlink extack handling messages know how to deal with that. The pattern "info ? info->extack : NULL" is present in quite a few other "prepare_data" implementations, so it's clear that it's a more general problem to be dealt with at a higher level, but the code should have at least adhered to the current conventions to avoid the NULL dereference. Fixes: 04692c9020b7 ("net: ethtool: netlink: retrieve stats from multiple sources (eMAC, pMAC)") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net/x25: Fix to not accept on connected socketHyunwoo Kim
When listen() and accept() are called on an x25 socket that connect() succeeds, accept() succeeds immediately. This is because x25_connect() queues the skb to sk->sk_receive_queue, and x25_accept() dequeues it. This creates a child socket with the sk of the parent x25 socket, which can cause confusion. Fix x25_listen() to return -EINVAL if the socket has already been successfully connect()ed to avoid this issue. Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net/smc: De-tangle ism and smc device initializationStefan Raspl
The struct device for ISM devices was part of struct smcd_dev. Move to struct ism_dev, provide a new API call in struct smcd_ops, and convert existing SMCD code accordingly. Furthermore, remove struct smcd_dev from struct ism_dev. This is the final part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25s390/ism: Consolidate SMC-D-related codeStefan Raspl
The ism module had SMC-D-specific code sprinkled across the entire module. We are now consolidating the SMC-D-specific parts into the latter parts of the module, so it becomes more clear what code is intended for use with ISM, and which parts are glue code for usage in the context of SMC-D. This is the fourth part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net/smc: Separate SMC-D and ISM APIsStefan Raspl
We separate the code implementing the struct smcd_ops API in the ISM device driver from the functions that may be used by other exploiters of ISM devices. Note: We start out small, and don't offer the whole breadth of the ISM device for public use, as many functions are specific to or likely only ever used in the context of SMC-D. This is the third part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net/smc: Register SMC-D as ISM clientStefan Raspl
Register the smc module with the new ism device driver API. This is the second part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net/ism: Add new API for client registrationStefan Raspl
Add a new API that allows other drivers to concurrently access ISM devices. To do so, we introduce a new API that allows other modules to register for ISM device usage. Furthermore, we move the GID to struct ism, where it belongs conceptually, and rename and relocate struct smcd_event to struct ism_event. This is the first part of a bigger overhaul of the interfaces between SMC and ISM. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-25net/smc: Terminate connections prior to device removalStefan Raspl
Removing an ISM device prior to terminating its associated connections doesn't end well. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-24devlink: remove a dubious assumption in fmsg dumpingJakub Kicinski
Build bot detects that err may be returned uninitialized in devlink_fmsg_prepare_skb(). This is not really true because all fmsgs users should create at least one outer nest, and therefore fmsg can't be completely empty. That said the assumption is not trivial to confirm, so let's follow the bots advice, anyway. This code does not seem to have changed since its inception in commit 1db64e8733f6 ("devlink: Add devlink formatted message (fmsg) API") Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230124035231.787381-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Perform SCTP vtag verification for ABORT/SHUTDOWN_COMPLETE according to RFC 9260, Sect 8.5.1. 2) Fix infinite loop if SCTP chunk size is zero in for_each_sctp_chunk(). And remove useless check in this macro too. 3) Revert DATA_SENT state in the SCTP tracker, this was applied in the previous merge window. Next patch in this series provides a more simple approach to multihoming support. 4) Unify HEARTBEAT_ACKED and ESTABLISHED states for SCTP multihoming support, use default ESTABLISHED of 210 seconds based on heartbeat timeout * maximum number of retransmission + round-trip timeout. Otherwise, SCTP conntrack entry that represents secondary paths remain stale in the table for up to 5 days. This is a slightly large batch with fixes for the SCTP connection tracking helper, all patches from Sriram Yagnaraman. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: conntrack: unify established states for SCTP paths Revert "netfilter: conntrack: add sctp DATA_SENT state" netfilter: conntrack: fix bug in for_each_sctp_chunk netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE ==================== Link: https://lore.kernel.org/r/20230124183933.4752-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24sctp: fail if no bound addresses can be used for a given scopeMarcelo Ricardo Leitner
Currently, if you bind the socket to something like: servaddr.sin6_family = AF_INET6; servaddr.sin6_port = htons(0); servaddr.sin6_scope_id = 0; inet_pton(AF_INET6, "::1", &servaddr.sin6_addr); And then request a connect to: connaddr.sin6_family = AF_INET6; connaddr.sin6_port = htons(20000); connaddr.sin6_scope_id = if_nametoindex("lo"); inet_pton(AF_INET6, "fe88::1", &connaddr.sin6_addr); What the stack does is: - bind the socket - create a new asoc - to handle the connect - copy the addresses that can be used for the given scope - try to connect But the copy returns 0 addresses, and the effect is that it ends up trying to connect as if the socket wasn't bound, which is not the desired behavior. This unexpected behavior also allows KASLR leaks through SCTP diag interface. The fix here then is, if when trying to copy the addresses that can be used for the scope used in connect() it returns 0 addresses, bail out. This is what TCP does with a similar reproducer. Reported-by: Pietro Borrello <borrello@diag.uniroma1.it> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/9fcd182f1099f86c6661f3717f63712ddd1c676c.1674496737.git.marcelo.leitner@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24net/sched: sch_taprio: do not schedule in taprio_reset()Eric Dumazet
As reported by syzbot and hinted by Vinicius, I should not have added a qdisc_synchronize() call in taprio_reset() taprio_reset() can be called with qdisc spinlock held (and BH disabled) as shown in included syzbot report [1]. Only taprio_destroy() needed this synchronization, as explained in the blamed commit changelog. [1] BUG: scheduling while atomic: syz-executor150/5091/0x00000202 2 locks held by syz-executor150/5091: Modules linked in: Preemption disabled at: [<0000000000000000>] 0x0 Kernel panic - not syncing: scheduling while atomic: panic_on_warn set ... CPU: 1 PID: 5091 Comm: syz-executor150 Not tainted 6.2.0-rc3-syzkaller-00219-g010a74f52203 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 panic+0x2cc/0x626 kernel/panic.c:318 check_panic_on_warn.cold+0x19/0x35 kernel/panic.c:238 __schedule_bug.cold+0xd5/0xfe kernel/sched/core.c:5836 schedule_debug kernel/sched/core.c:5865 [inline] __schedule+0x34e4/0x5450 kernel/sched/core.c:6500 schedule+0xde/0x1b0 kernel/sched/core.c:6682 schedule_timeout+0x14e/0x2a0 kernel/time/timer.c:2167 schedule_timeout_uninterruptible kernel/time/timer.c:2201 [inline] msleep+0xb6/0x100 kernel/time/timer.c:2322 qdisc_synchronize include/net/sch_generic.h:1295 [inline] taprio_reset+0x93/0x270 net/sched/sch_taprio.c:1703 qdisc_reset+0x10c/0x770 net/sched/sch_generic.c:1022 dev_reset_queue+0x92/0x130 net/sched/sch_generic.c:1285 netdev_for_each_tx_queue include/linux/netdevice.h:2464 [inline] dev_deactivate_many+0x36d/0x9f0 net/sched/sch_generic.c:1351 dev_deactivate+0xed/0x1b0 net/sched/sch_generic.c:1374 qdisc_graft+0xe4a/0x1380 net/sched/sch_api.c:1080 tc_modify_qdisc+0xb6b/0x19a0 net/sched/sch_api.c:1689 rtnetlink_rcv_msg+0x43e/0xca0 net/core/rtnetlink.c:6141 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2564 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x712/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2559 do_syscall_x64 arch/x86/entry/common.c:50 [inline] Fixes: 3a415d59c1db ("net/sched: sch_taprio: fix possible use-after-free") Link: https://lore.kernel.org/netdev/167387581653.2747.13878941339893288655.git-patchwork-notify@kernel.org/T/ Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20230123084552.574396-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24ipv6: Make ip6_route_output_flags_noref() static.Guillaume Nault
This function is only used in net/ipv6/route.c and has no reason to be visible outside of it. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/50706db7f675e40b3594d62011d9363dce32b92e.1674495822.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24netlink: fix spelling mistake in dump size assertJakub Kicinski
Commit 2c7bc10d0f7b ("netlink: add macro for checking dump ctx size") misspelled the name of the assert as asset, missing an R. Reported-by: Ido Schimmel <idosch@idosch.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230123222224.732338-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24Revert "Merge branch 'ethtool-mac-merge'"Paolo Abeni
This reverts commit 0ad999c1eec879f06cc52ef7df4d0dbee4a2d7eb, reversing changes made to e38553bdc377e3e7a6caa9dd9770d8b644d8dac3. It was not intended for net. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-24netrom: Fix use-after-free of a listening socket.Kuniyuki Iwashima
syzbot reported a use-after-free in do_accept(), precisely nr_accept() as sk_prot_alloc() allocated the memory and sock_put() frees it. [0] The issue could happen if the heartbeat timer is fired and nr_heartbeat_expiry() calls nr_destroy_socket(), where a socket has SOCK_DESTROY or a listening socket has SOCK_DEAD. In this case, the first condition cannot be true. SOCK_DESTROY is flagged in nr_release() only when the file descriptor is close()d, but accept() is being called for the listening socket, so the second condition must be true. Usually, the AF_NETROM listener neither starts timers nor sets SOCK_DEAD. However, the condition is met if connect() fails before listen(). connect() starts the t1 timer and heartbeat timer, and t1timer calls nr_disconnect() when timeout happens. Then, SOCK_DEAD is set, and if we call listen(), the heartbeat timer calls nr_destroy_socket(). nr_connect nr_establish_data_link(sk) nr_start_t1timer(sk) nr_start_heartbeat(sk) nr_t1timer_expiry nr_disconnect(sk, ETIMEDOUT) nr_sk(sk)->state = NR_STATE_0 sk->sk_state = TCP_CLOSE sock_set_flag(sk, SOCK_DEAD) nr_listen if (sk->sk_state != TCP_LISTEN) sk->sk_state = TCP_LISTEN nr_heartbeat_expiry switch (nr->state) case NR_STATE_0 if (sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD)) nr_destroy_socket(sk) This path seems expected, and nr_destroy_socket() is called to clean up resources. Initially, there was sock_hold() before nr_destroy_socket() so that the socket would not be freed, but the commit 517a16b1a88b ("netrom: Decrease sock refcount when sock timers expire") accidentally removed it. To fix use-after-free, let's add sock_hold(). [0]: BUG: KASAN: use-after-free in do_accept+0x483/0x510 net/socket.c:1848 Read of size 8 at addr ffff88807978d398 by task syz-executor.3/5315 CPU: 0 PID: 5315 Comm: syz-executor.3 Not tainted 6.2.0-rc3-syzkaller-00165-gd9fc1511728c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:306 [inline] print_report+0x15e/0x461 mm/kasan/report.c:417 kasan_report+0xbf/0x1f0 mm/kasan/report.c:517 do_accept+0x483/0x510 net/socket.c:1848 __sys_accept4_file net/socket.c:1897 [inline] __sys_accept4+0x9a/0x120 net/socket.c:1927 __do_sys_accept net/socket.c:1944 [inline] __se_sys_accept net/socket.c:1941 [inline] __x64_sys_accept+0x75/0xb0 net/socket.c:1941 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa436a8c0c9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fa437784168 EFLAGS: 00000246 ORIG_RAX: 000000000000002b RAX: ffffffffffffffda RBX: 00007fa436bac050 RCX: 00007fa436a8c0c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005 RBP: 00007fa436ae7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffebc6700df R14: 00007fa437784300 R15: 0000000000022000 </TASK> Allocated by task 5294: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] ____kasan_kmalloc mm/kasan/common.c:330 [inline] __kasan_kmalloc+0xa3/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slab_common.c:968 [inline] __kmalloc+0x5a/0xd0 mm/slab_common.c:981 kmalloc include/linux/slab.h:584 [inline] sk_prot_alloc+0x140/0x290 net/core/sock.c:2038 sk_alloc+0x3a/0x7a0 net/core/sock.c:2091 nr_create+0xb6/0x5f0 net/netrom/af_netrom.c:433 __sock_create+0x359/0x790 net/socket.c:1515 sock_create net/socket.c:1566 [inline] __sys_socket_create net/socket.c:1603 [inline] __sys_socket_create net/socket.c:1588 [inline] __sys_socket+0x133/0x250 net/socket.c:1636 __do_sys_socket net/socket.c:1649 [inline] __se_sys_socket net/socket.c:1647 [inline] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 14: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:518 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x13b/0x1a0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] __cache_free mm/slab.c:3394 [inline] __do_kmem_cache_free mm/slab.c:3580 [inline] __kmem_cache_free+0xcd/0x3b0 mm/slab.c:3587 sk_prot_free net/core/sock.c:2074 [inline] __sk_destruct+0x5df/0x750 net/core/sock.c:2166 sk_destruct net/core/sock.c:2181 [inline] __sk_free+0x175/0x460 net/core/sock.c:2192 sk_free+0x7c/0xa0 net/core/sock.c:2203 sock_put include/net/sock.h:1991 [inline] nr_heartbeat_expiry+0x1d7/0x460 net/netrom/nr_timer.c:148 call_timer_fn+0x1da/0x7c0 kernel/time/timer.c:1700 expire_timers+0x2c6/0x5c0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xadc kernel/softirq.c:571 Fixes: 517a16b1a88b ("netrom: Decrease sock refcount when sock timers expire") Reported-by: syzbot+5fafd5cfe1fc91f6b352@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230120231927.51711-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-24net: fou: use policy and operation tables generated from the specJakub Kicinski
Generate and plug in the spec-based tables. A little bit of renaming is needed in the FOU code. Acked-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-08 22:11:56 +0000