summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-02-07mac80211: parse also the RSNXE IEShaul Triebitz
Parse also the RSN Extension IE when parsing the rest of the IEs. It will be used in a later patch. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-21-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211/mac80211: Allow user space to register for station Rx authenticationIlan Peer
To support Pre Association Security Negotiation (PASN) while already associated to one AP, allow user space to register to Rx authentication frames, so that the user space logic would be able to receive/handle authentication frames from a different AP as part of PASN. Note that it is expected that user space would intelligently register for Rx authentication frames, i.e., only when PASN is used and configure a match filter only for PASN authentication algorithm, as otherwise the MLME functionality of mac80211 would be broken. Additionally, since some versions of the user space daemons wrongly register to all types of authentication frames (which might result in unexpected behavior) allow such registration if the request is for a specific authentication algorithm number. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131114529.894206-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211: check wiphy driver existence for drvinfo reportSergey Matyukevich
When preparing ethtool drvinfo, check if wiphy driver is defined before dereferencing it. Driver may not exist, e.g. if wiphy is attached to a virtual platform device. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200203105644.28875-1-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: Remove support for changing AP SMPS modeIlan Peer
The SMPS feature is defined in the specification only to be used by non-AP stations and not by APs, so remove the support for changing the AP's SMPS mode dynamically. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-20-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: Handle SMPS mode changes only in AP modeIlan Peer
According to IEEE802.11 specifications the SM power save field in the HT capability IE and the HE extended capability IE is valid only in (re)association frames and should be ignored otherwise. Remove code paths that handled this also for non AP modes. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-17-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: Accept broadcast probe responses on 6GHz bandAndrei Otcheretianski
An AP that operates on 6GHz may respond with a broadcast probe response. Don't ignore such frames. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-14-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: HE: set RX NSSTova Mussai
In case of HE, the RX NSS is taken from the HE capabilities. If the supported NSS capabilities that are reported by AP for HE mode in the HE Capabilities element are different from the NSS capabilities that are reported by AP for the VHT mode in the VHT Capabilities element, use the lowest supported NSS to not get all the values confused. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-9-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: set station bandwidth from HE capabilityJohannes Berg
Set the station bandwidth in HE capability parsing and from HE capability as the HT/VHT information will not be present on the 6 GHz band. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-5-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: remove supported channels element in 6 GHz if ECSA supportJohannes Berg
We should not include the supported channels element if we have (advertise) support for extended channel switching. To avoid any interop issues because we always added it in the past, obey this restriction only in the (new) 6 GHz band. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131113111.893106-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: update condition for HE disablementDaniel Gabay
Disable HE if the beacon does not contain an HE operation IE. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-16-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: make ieee80211_wep_init() return voidLuca Coelho
This function always returns 0, so there's no point in returning int. Make it void and remove the impossible error-path when calling it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-11-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: allow changing TX-related netdev featuresJohannes Berg
Set ndev->hw_features as well as ndev->features to allow changing the TX-related features with ethtool. We cannot (yet) change RX-related features since that requires telling the driver about it and we have no API for that yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-10-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: check whether HE connection is allowed by the reg domainHaim Dreyfuss
The wireless device might be capable to connect HE as well as the AP. However, the regulatory domain might forbid it. Check whether the regulatory domain allows HE connection when considering if HE IE should be added. Also, add it when setting our peer capability. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-8-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: refactor extended element parsingJohannes Berg
This code was really ugly, refactor it a bit to make it more readable. While at it, use sizeof() and fix the UORA element length check bug. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-4-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: simplify and improve HT/VHT/HE disable codeJohannes Berg
Check early on that a device has support for QoS (at least 4 queues) when it supports HT/VHT/HE, so we don't have to check this while connecting. This lets us clean up the code there: move some of it into channel preparation to clean up a bit more, and then change the logic to only check the "wmm_used" flag. Additionally, disable HE consistently when VHT is disabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-3-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211: Enhance the AKM advertizement to support per interface.Veerendranath Jakkam
Commit ab4dfa20534e ("cfg80211: Allow drivers to advertise supported AKM suites") introduces the support to advertize supported AKMs to userspace. This needs an enhancement to advertize the AKM support per interface type, specifically for the cfg80211-based drivers that implement SME and use different mechanisms to support the AKM's for each interface type (e.g., the support for SAE, OWE AKM's take different paths for such drivers on STA/AP mode). This commit aims the same and enhances the earlier mechanism of advertizing the AKMs per wiphy. Add new nl80211 attributes and data structure to provide supported AKMs per interface type to userspace. the AKMs advertized in akm_suites are default capabilities if not advertized for a specific interface type in iftype_akm_suites. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> Link: https://lore.kernel.org/r/20200126203032.21934-1-vjakkam@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07cfg80211: add no HE indication to the channel flagHaim Dreyfuss
The regulatory domain might forbid HE operation. Certain regulatory domains may restrict it for specific channels whereas others may do it for the whole regulatory domain. Add an option to indicate it in the channel flag. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200121081213.733757-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: consider more elements in parsing CRCJohannes Berg
We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC: - WLAN_EID_VHT_OPERATION - WLAN_EID_OPMODE_NOTIF I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi [restrict to VHT for the mac80211 branch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: fix quiet mode activation in action framesSara Sharon
Previously I intended to ignore quiet mode in probe response, however I ended up ignoring it instead for action frames. As a matter of fact, this path isn't invoked for probe responses to start with. Just revert this patch. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Fixes: 7976b1e9e3bf ("mac80211: ignore quiet mode in probe") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-15-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: use more bits for ack_frame_idJohannes Berg
It turns out that this wasn't a good idea, I hit a test failure in hwsim due to this. That particular failure was easily worked around, but it raised questions: if an AP needs to, for example, send action frames to each connected station, the current limit is nowhere near enough (especially if those stations are sleeping and the frames are queued for a while.) Shuffle around some bits to make more room for ack_frame_id to allow up to 8192 queued up frames, that's enough for queueing 4 frames to each connected station, even at the maximum of 2007 stations on a single AP. We take the bits from band (which currently only 2 but I leave 3 in case we add another band) and from the hw_queue, which can only need 4 since it has a limit of 16 queues. Fixes: 6912daed05e1 ("mac80211: Shrink the size of ack_frame_id to make room for tx_time_est") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200115122549.b9a4ef9f4980.Ied52ed90150220b83a280009c590b65d125d087c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07mac80211: fix 11w when using encapsulation offloadingJohn Crispin
The 802.11 encapsulation returned early when setting up the keys in case offloading was enabled. This causes ieee802.11w to not work anymore. Fix this by moving the check for offloading into the switch/case construct and allowing CCMP/GCMP keys. With this patch applied ieee80211w works again when enabling offloading. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Reported-by: Maharaja Kennadyrajan <mkenna@qti.qualcomm.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200203122812.18993-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-07taprio: Fix dropping packets when using taprio + ETF offloadingVinicius Costa Gomes
When using taprio offloading together with ETF offloading, configured like this, for example: $ tc qdisc replace dev $IFACE parent root handle 100 taprio \ num_tc 4 \ map 2 2 1 0 3 2 2 2 2 2 2 2 2 2 2 2 \ queues 1@0 1@1 1@2 1@3 \ base-time $BASE_TIME \ sched-entry S 01 1000000 \ sched-entry S 0e 1000000 \ flags 0x2 $ tc qdisc replace dev $IFACE parent 100:1 etf \ offload delta 300000 clockid CLOCK_TAI During enqueue, it works out that the verification added for the "txtime" assisted mode is run when using taprio + ETF offloading, the only thing missing is initializing the 'next_txtime' of all the cycle entries. (if we don't set 'next_txtime' all packets from SO_TXTIME sockets are dropped) Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07taprio: Use taprio_reset_tc() to reset Traffic Classes configurationVinicius Costa Gomes
When destroying the current taprio instance, which can happen when the creation of one fails, we should reset the traffic class configuration back to the default state. netdev_reset_tc() is a better way because in addition to setting the number of traffic classes to zero, it also resets the priority to traffic classes mapping to the default value. Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07taprio: Add missing policy validation for flagsVinicius Costa Gomes
netlink policy validation for the 'flags' argument was missing. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07taprio: Fix still allowing changing the flags during runtimeVinicius Costa Gomes
Because 'q->flags' starts as zero, and zero is a valid value, we aren't able to detect the transition from zero to something else during "runtime". The solution is to initialize 'q->flags' with an invalid value, so we can detect if 'q->flags' was set by the user or not. To better solidify the behavior, 'flags' handling is moved to a separate function. The behavior is: - 'flags' if unspecified by the user, is assumed to be zero; - 'flags' cannot change during "runtime" (i.e. a change() request cannot modify it); With this new function we can remove taprio_flags, which should reduce the risk of future accidents. Allowing flags to be changed was causing the following RCU stall: [ 1730.558249] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 1730.558258] rcu: 6-...0: (190 ticks this GP) idle=922/0/0x1 softirq=25580/25582 fqs=16250 [ 1730.558264] (detected by 2, t=65002 jiffies, g=33017, q=81) [ 1730.558269] Sending NMI from CPU 2 to CPUs 6: [ 1730.559277] NMI backtrace for cpu 6 [ 1730.559277] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G E 5.5.0-rc6+ #35 [ 1730.559278] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 1730.559278] RIP: 0010:__hrtimer_run_queues+0xe2/0x440 [ 1730.559278] Code: 48 8b 43 28 4c 89 ff 48 8b 75 c0 48 89 45 c8 e8 f4 bb 7c 00 0f 1f 44 00 00 65 8b 05 40 31 f0 68 89 c0 48 0f a3 05 3e 5c 25 01 <0f> 82 fc 01 00 00 48 8b 45 c8 48 89 df ff d0 89 45 c8 0f 1f 44 00 [ 1730.559279] RSP: 0018:ffff9970802d8f10 EFLAGS: 00000083 [ 1730.559279] RAX: 0000000000000006 RBX: ffff8b31645bff38 RCX: 0000000000000000 [ 1730.559280] RDX: 0000000000000000 RSI: ffffffff9710f2ec RDI: ffffffff978daf0e [ 1730.559280] RBP: ffff9970802d8f68 R08: 0000000000000000 R09: 0000000000000000 [ 1730.559280] R10: 0000018336d7944e R11: 0000000000000001 R12: ffff8b316e39f9c0 [ 1730.559281] R13: ffff8b316e39f940 R14: ffff8b316e39f998 R15: ffff8b316e39f7c0 [ 1730.559281] FS: 0000000000000000(0000) GS:ffff8b316e380000(0000) knlGS:0000000000000000 [ 1730.559281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1730.559281] CR2: 00007f1105303760 CR3: 0000000227210005 CR4: 00000000003606e0 [ 1730.559282] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1730.559282] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1730.559282] Call Trace: [ 1730.559282] <IRQ> [ 1730.559283] ? taprio_dequeue_soft+0x2d0/0x2d0 [sch_taprio] [ 1730.559283] hrtimer_interrupt+0x104/0x220 [ 1730.559283] ? irqtime_account_irq+0x34/0xa0 [ 1730.559283] smp_apic_timer_interrupt+0x6d/0x230 [ 1730.559284] apic_timer_interrupt+0xf/0x20 [ 1730.559284] </IRQ> [ 1730.559284] RIP: 0010:cpu_idle_poll+0x35/0x1a0 [ 1730.559285] Code: 88 82 ff 65 44 8b 25 12 7d 73 68 0f 1f 44 00 00 e8 90 c3 89 ff fb 65 48 8b 1c 25 c0 7e 01 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 be a8 a8 00 85 c0 75 ed e8 75 48 84 ff [ 1730.559285] RSP: 0018:ffff997080137ea8 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13 [ 1730.559285] RAX: 0000000000000001 RBX: ffff8b316bc3c580 RCX: 0000000000000000 [ 1730.559286] RDX: 0000000000000001 RSI: 000000002819aad9 RDI: ffffffff978da730 [ 1730.559286] RBP: ffff997080137ec0 R08: 0000018324a6d387 R09: 0000000000000000 [ 1730.559286] R10: 0000000000000400 R11: 0000000000000001 R12: 0000000000000006 [ 1730.559286] R13: ffff8b316bc3c580 R14: 0000000000000000 R15: 0000000000000000 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] ? cpu_idle_poll+0x20/0x1a0 [ 1730.559287] do_idle+0x4d/0x1f0 [ 1730.559287] ? complete+0x44/0x50 [ 1730.559288] cpu_startup_entry+0x1b/0x20 [ 1730.559288] start_secondary+0x142/0x180 [ 1730.559288] secondary_startup_64+0xb6/0xc0 [ 1776.686313] nvme nvme0: I/O 96 QID 1 timeout, completion polled Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07taprio: Fix enabling offload with wrong number of traffic classesVinicius Costa Gomes
If the driver implementing taprio offloading depends on the value of the network device number of traffic classes (dev->num_tc) for whatever reason, it was going to receive the value zero. The value was only set after the offloading function is called. So, moving setting the number of traffic classes to before the offloading function is called fixes this issue. This is safe because this only happens when taprio is instantiated (we don't allow this configuration to be changed without first removing taprio). Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Reported-by: Po Liu <po.liu@nxp.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07rxrpc: Fix call RCU cleanup using non-bh-safe locksDavid Howells
rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a put call, calls rxrpc_put_connection() which, deep in its bowels, takes a number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and local->client_conns_lock. RCU callbacks, however, are normally called from softirq context, which can cause lockdep to notice the locking inconsistency. To get lockdep to detect this, it's necessary to have the connection cleaned up on the put at the end of the last of its calls, though normally the clean up is deferred. This can be induced, however, by starting a call on an AF_RXRPC socket and then closing the socket without reading the reply. Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a workqueue if in softirq-mode and defer the destruction to process context. Note that another way to fix this could be to add a bunch of bh-disable annotations to the spinlocks concerned - and there might be more than just those two - but that means spending more time with BHs disabled. Note also that some of these places were covered by bh-disable spinlocks belonging to the rxrpc_transport object, but these got removed without the _bh annotation being retained on the next lock in. Fixes: 999b69f89241 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07rxrpc: Fix service call disconnectionDavid Howells
The recent patch that substituted a flag on an rxrpc_call for the connection pointer being NULL as an indication that a call was disconnected puts the set_bit in the wrong place for service calls. This is only a problem if a call is implicitly terminated by a new call coming in on the same connection channel instead of a terminating ACK packet. In such a case, rxrpc_input_implicit_end_call() calls __rxrpc_disconnect_call(), which is now (incorrectly) setting the disconnection bit, meaning that when rxrpc_release_call() is later called, it doesn't call rxrpc_disconnect_call() and so the call isn't removed from the peer's error distribution list and the list gets corrupted. KASAN finds the issue as an access after release on a call, but the position at which it occurs is confusing as it appears to be related to a different call (the call site is where the latter call is being removed from the error distribution list and either the next or pprev pointer points to a previously released call). Fix this by moving the setting of the flag from __rxrpc_disconnect_call() to rxrpc_disconnect_call() in the same place that the connection pointer was being cleared. Fixes: 5273a191dca6 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-07fs_parse: get rid of ->enumsAl Viro
Don't do a single array; attach them to fsparam_enum() entry instead. And don't bother trying to embed the names into those - it actually loses memory, with no real speedup worth mentioning. Simplifies validation as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-06net: sched: prevent a use after freeDan Carpenter
The bug is that we call kfree_skb(skb) and then pass "skb" to qdisc_pkt_len(skb) on the next line, which is a use after free. Also Cong Wang points out that it's better to delay the actual frees until we drop the rtnl lock so we should use rtnl_kfree_skbs() instead of kfree_skb(). Cc: Cong Wang <xiyou.wangcong@gmail.com> Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06skbuff: fix a data race in skb_queue_len()Qian Cai
sk_buff.qlen can be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_dgram_sendmsg read to 0xffff8a1b1d8a81c0 of 4 bytes by task 5371 on cpu 96: unix_dgram_sendmsg+0x9a9/0xb70 include/linux/skbuff.h:1821 net/unix/af_unix.c:1761 ____sys_sendmsg+0x33e/0x370 ___sys_sendmsg+0xa6/0xf0 __sys_sendmsg+0x69/0xf0 __x64_sys_sendmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe write to 0xffff8a1b1d8a81c0 of 4 bytes by task 1 on cpu 99: __skb_try_recv_from_queue+0x327/0x410 include/linux/skbuff.h:2029 __skb_try_recv_datagram+0xbe/0x220 unix_dgram_recvmsg+0xee/0x850 ____sys_recvmsg+0x1fb/0x210 ___sys_recvmsg+0xa2/0xf0 __sys_recvmsg+0x66/0xf0 __x64_sys_recvmsg+0x51/0x70 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe Since only the read is operating as lockless, it could introduce a logic bug in unix_recvq_full() due to the load tearing. Fix it by adding a lockless variant of skb_queue_len() and unix_recvq_full() where READ_ONCE() is on the read while WRITE_ONCE() is on the write similar to the commit d7d16a89350a ("net: add skb_queue_empty_lockless()"). Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06vti[6]: fix packet tx through bpf_redirect() in XinY casesNicolas Dichtel
I forgot the 4in6/6in4 cases in my previous patch. Let's fix them. Fixes: 95224166a903 ("vti[6]: fix packet tx through bpf_redirect()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-06Merge tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: - a set of patches that fixes various corner cases in mount and umount code (Xiubo Li). This has to do with choosing an MDS, distinguishing between laggy and down MDSes and parsing the server path. - inode initialization fixes (Jeff Layton). The one included here mostly concerns things like open_by_handle() and there is another one that will come through Al. - copy_file_range() now uses the new copy-from2 op (Luis Henriques). The existing copy-from op turned out to be infeasible for generic filesystem use; we disable the copy offload if OSDs don't support copy-from2. - a patch to link "rbd" and "block" devices together in sysfs (Hannes Reinecke) ... and a smattering of cleanups from Xiubo, Jeff and Chengguang. * tag 'ceph-for-5.6-rc1' of https://github.com/ceph/ceph-client: (25 commits) rbd: set the 'device' link in sysfs ceph: move net/ceph/ceph_fs.c to fs/ceph/util.c ceph: print name of xattr in __ceph_{get,set}xattr() douts ceph: print r_direct_hash in hex in __choose_mds() dout ceph: use copy-from2 op in copy_file_range ceph: close holes in structs ceph_mds_session and ceph_mds_request rbd: work around -Wuninitialized warning ceph: allocate the correct amount of extra bytes for the session features ceph: rename get_session and switch to use ceph_get_mds_session ceph: remove the extra slashes in the server path ceph: add possible_max_rank and make the code more readable ceph: print dentry offset in hex and fix xattr_version type ceph: only touch the caps which have the subset mask requested ceph: don't clear I_NEW until inode metadata is fully populated ceph: retry the same mds later after the new session is opened ceph: check availability of mds cluster on mount after wait timeout ceph: keep the session state until it is released ceph: add __send_request helper ceph: ensure we have a new cap before continuing in fill_inode ceph: drop unused ttl_from parameter from fill_inode ...
2020-02-06mptcp: fix use-after-free for ipv6Florian Westphal
Turns out that when we accept a new subflow, the newly created inet_sk(tcp_sk)->pinet6 points at the ipv6_pinfo structure of the listener socket. This wasn't caught by the selftest because it closes the accepted fd before the listening one. adding a close(listenfd) after accept returns is enough: BUG: KASAN: use-after-free in inet6_getname+0x6ba/0x790 Read of size 1 at addr ffff88810e310866 by task mptcp_connect/2518 Call Trace: inet6_getname+0x6ba/0x790 __sys_getpeername+0x10b/0x250 __x64_sys_getpeername+0x6f/0xb0 also alter test program to exercise this. Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05devlink: report 0 after hitting end in region readJacob Keller
commit fdd41ec21e15 ("devlink: Return right error code in case of errors for region read") modified the region read code to report errors properly in unexpected cases. In the case where the start_offset and ret_offset match, it unilaterally converted this into an error. This causes an issue for the "dump" version of the command. In this case, the devlink region dump will always report an invalid argument: 000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff devlink answers: Invalid argument 000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff This occurs because the expected flow for the dump is to return 0 after there is no further data. The simplest fix would be to stop converting the error code to -EINVAL if start_offset == ret_offset. However, avoid unnecessary work by checking for when start_offset is larger than the region size and returning 0 upfront. Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05net_sched: fix a resource leak in tcindex_set_parms()Cong Wang
Jakub noticed there is a potential resource leak in tcindex_set_parms(): when tcindex_filter_result_init() fails and it jumps to 'errout1' which doesn't release the memory and resources allocated by tcindex_alloc_perfect_hash(). We should just jump to 'errout_alloc' which calls tcindex_free_perfect_hash(). Fixes: b9a24bb76bf6 ("net_sched: properly handle failure case of tcf_exts_init()") Reported-by: Jakub Kicinski <kuba@kernel.org> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05mptcp: fix use-after-free on tcp fallbackFlorian Westphal
When an mptcp socket connects to a tcp peer or when a middlebox interferes with tcp options, mptcp needs to fall back to plain tcp. Problem is that mptcp is trying to be too clever in this case: It attempts to close the mptcp meta sk and transparently replace it with the (only) subflow tcp sk. Unfortunately, this is racy -- the socket is already exposed to userspace. Any parallel calls to send/recv/setsockopt etc. can cause use-after-free: BUG: KASAN: use-after-free in atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline] CPU: 1 PID: 2083 Comm: syz-executor.1 Not tainted 5.5.0 #2 atomic_try_cmpxchg include/asm-generic/atomic-instrumented.h:693 [inline] queued_spin_lock include/asm-generic/qspinlock.h:78 [inline] do_raw_spin_lock include/linux/spinlock.h:181 [inline] __raw_spin_lock_bh include/linux/spinlock_api_smp.h:136 [inline] _raw_spin_lock_bh+0x71/0xd0 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:343 [inline] __lock_sock+0x105/0x190 net/core/sock.c:2414 lock_sock_nested+0x10f/0x140 net/core/sock.c:2938 lock_sock include/net/sock.h:1516 [inline] mptcp_setsockopt+0x2f/0x1f0 net/mptcp/protocol.c:800 __sys_setsockopt+0x152/0x240 net/socket.c:2130 __do_sys_setsockopt net/socket.c:2146 [inline] __se_sys_setsockopt net/socket.c:2143 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2143 do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 While the use-after-free can be resolved, there is another problem: sock->ops and sock->sk assignments are not atomic, i.e. we may get calls into mptcp functions with sock->sk already pointing at the subflow socket, or calls into tcp functions with a mptcp meta sk. Remove the fallback code and call the relevant functions for the (only) subflow in case the mptcp socket is connected to tcp peer. Reported-by: Christoph Paasch <cpaasch@apple.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-05Bluetooth: remove __get_channel/dir and __dirAlex Shi
These 3 macros are never used from first git commit Linux-2.6.12-rc2. let's remove them. Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-05Bluetooth: prefetch channel before killing sockHillf Danton
Prefetch channel before killing sock in order to fix UAF like BUG: KASAN: use-after-free in l2cap_sock_release+0x24c/0x290 net/bluetooth/l2cap_sock.c:1212 Read of size 8 at addr ffff8880944904a0 by task syz-fuzzer/9751 Reported-by: syzbot+c3c5bdea7863886115dc@syzkaller.appspotmail.com Fixes: 6c08fc896b60 ("Bluetooth: Fix refcount use-after-free issue") Cc: Manish Mandlik <mmandlik@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ...
2020-02-04xfrm: handle NETDEV_UNREGISTER for xfrm deviceRaed Salem
This patch to handle the asynchronous unregister device event so the device IPsec offload resources could be cleanly released. Fixes: e4db5b61c572 ("xfrm: policy: remove pcpu policy cache") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-02-04l2tp: Allow duplicate session creation with UDPRidge Kennedy
In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04net_sched: fix an OOB access in cls_tcindexCong Wang
As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash to compute the size of memory allocation, but cp->hash is set again after the allocation, this caused an out-of-bound access. So we have to move all cp->hash initialization and computation before the memory allocation. Move cp->mask and cp->shift together as cp->hash may need them for computation too. Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04net: hsr: fix possible NULL deref in hsr_handle_frame()Eric Dumazet
hsr_port_get_rcu() can return NULL, so we need to be careful. general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44 Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33 RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000 RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8 FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312 process_backlog+0x206/0x750 net/core/dev.c:6144 napi_poll net/core/dev.c:6582 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6650 __do_softirq+0x262/0x98c kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-03SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id()Trond Myklebust
Using kmemdup_nul() is more efficient when the length is known. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-02-03Merge tag 'rxrpc-fixes-20200203' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== RxRPC fixes Here are a number of fixes for AF_RXRPC: (1) Fix a potential use after free in rxrpc_put_local() where it was accessing the object just put to get tracing information. (2) Fix insufficient notifications being generated by the function that queues data packets on a call. This occasionally causes recvmsg() to stall indefinitely. (3) Fix a number of packet-transmitting work functions to hold an active count on the local endpoint so that the UDP socket doesn't get destroyed whilst they're calling kernel_sendmsg() on it. (4) Fix a NULL pointer deref that stemmed from a call's connection pointer being cleared when the call was disconnected. Changes: v2: Removed a couple of BUG() statements that got added. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-04kbuild: rename hostprogs-y/always to hostprogs/always-yMasahiro Yamada
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-03rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnectDavid Howells
When a call is disconnected, the connection pointer from the call is cleared to make sure it isn't used again and to prevent further attempted transmission for the call. Unfortunately, there might be a daemon trying to use it at the same time to transmit a packet. Fix this by keeping call->conn set, but setting a flag on the call to indicate disconnection instead. Remove also the bits in the transmission functions where the conn pointer is checked and a ref taken under spinlock as this is now redundant. Fixes: 8d94aa381dab ("rxrpc: Calls shouldn't hold socket refs") Signed-off-by: David Howells <dhowells@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-13 22:27:09 +0000