| Age | Commit message (Collapse) | Author |
|---|
|
Mostly simple overlapping changes.
For example, David Ahern's adjacency list revamp in 'net-next'
conflicted with an adjacency list traversal bug fix in 'net'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sending functions in Linux consume the supplied skbuff. Doing the same in
batadv_send_skb_to_orig avoids the hack of returning -1 (-EPERM) to signal
the caller that he is responsible for cleaning up the skb.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Sending functions in Linux consume the supplied skbuff. Doing the same in
batadv_frag_send_packet avoids the hack of returning -1 (-EPERM) to signal
the caller that he is responsible for cleaning up the skb.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
A failure during the submission also causes dropped packets.
batadv_interface_tx should therefore also increase the DROPPED counter for
these returns.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
kfree_skb assumes that an skb is dropped after an failure and notes that.
consume_skb should be used in non-failure situations. Such information is
important for dropmonitor netlink which tells how many packets were dropped
and where this drop happened.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
With this patch, (re)broadcasting on a specific interfaces is avoided:
* No neighbor: There is no need to broadcast on an interface if there
is no node behind it.
* Single neighbor is source: If there is just one neighbor on an
interface and if this neighbor is the one we actually got this
broadcast packet from, then we do not need to echo it back.
* Single neighbor is originator: If there is just one neighbor on
an interface and if this neighbor is the originator of this
broadcast packet, then we do not need to echo it back.
Goodies for BATMAN V:
("Upgrade your BATMAN IV network to V now to get these for free!")
Thanks to the split of OGMv1 into two packet types, OGMv2 and ELP
that is, we can now apply the same optimizations stated above to OGMv2
packets, too.
Furthermore, with BATMAN V, rebroadcasts can be reduced in certain
multi interface cases, too, where BATMAN IV cannot. This is thanks to
the removal of the "secondary interface originator" concept in BATMAN V.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Instead of latching onto the OGM period, this patch introduces a worker
dedicated to multicast TT and TVLV updates.
The reasoning is, that upon roaming especially the translation table
should be updated timely to minimize connectivity issues.
With BATMAN V, the idea is to greatly increase the OGM interval to
reduce overhead. Unfortunately, right now this could lead to
a bad user experience if multicast traffic is involved.
Therefore this patch introduces a fixed 500ms update interval for
multicast TT entries and the multicast TVLV.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
During broadcast queueing, the skb_reset_mac_header() sets the skb
to a place invalid for a MAC header, pointing right into the
batman-adv broadcast packet. Luckily, no one seems to actually use
eth_hdr(skb) afterwards until batadv_send_skb_packet() resets the
header to a valid position again.
Therefore removing this unnecessary, weird skb_reset_mac_header()
call.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
batadv_mcast_mla_list_free() just frees some leftovers of a local feast
in batadv_mcast_mla_update(). No lockdep needed as it has nothing to do
with bat_priv->mcast.mla_list.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Removing duplicate code.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
The genl_ops don't need to be written by anyone and thus can be moved in a
ro memory range.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Fixes: 56989f6d8568 ("genetlink: mark families as __ro_after_init")
Fixes: 2ae0f17df1cd ("genetlink: use idr to track families")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Pull networking fixes from David Miller:
"Lots of fixes, mostly drivers as is usually the case.
1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey
Khoroshilov.
2) Fix element timeouts in netfilter's nft_dynset, from Anders K.
Pedersen.
3) Don't put aead_req crypto struct on the stack in mac80211, from
Ard Biesheuvel.
4) Several uninitialized variable warning fixes from Arnd Bergmann.
5) Fix memory leak in cxgb4, from Colin Ian King.
6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann.
7) Several VRF semantic fixes from David Ahern.
8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper.
9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet.
10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev.
11) Fix stale link state during failover in NCSCI driver, from Gavin
Shan.
12) Fix netdev lower adjacency list traversal, from Ido Schimmel.
13) Propvide proper handle when emitting notifications of filter
deletes, from Jamal Hadi Salim.
14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen.
15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac.
16) Several routing offload fixes in mlxsw driver, from Jiri Pirko.
17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy.
18) Validate chunk len before using it in SCTP, from Marcelo Ricardo
Leitner.
19) Revert a netns locking change that causes regressions, from Paul
Moore.
20) Add recursion limit to GRO handling, from Sabrina Dubroca.
21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon.
22) Avoid accessing stale vxlan/geneve socket in data path, from
Pravin Shelar"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits)
geneve: avoid using stale geneve socket.
vxlan: avoid using stale vxlan socket.
qede: Fix out-of-bound fastpath memory access
net: phy: dp83848: add dp83822 PHY support
enic: fix rq disable
tipc: fix broadcast link synchronization problem
ibmvnic: Fix missing brackets in init_sub_crq_irqs
ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context
Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context"
arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold
net/mlx4_en: Save slave ethtool stats command
net/mlx4_en: Fix potential deadlock in port statistics flow
net/mlx4: Fix firmware command timeout during interrupt test
net/mlx4_core: Do not access comm channel if it has not yet been initialized
net/mlx4_en: Fix panic during reboot
net/mlx4_en: Process all completions in RX rings after port goes up
net/mlx4_en: Resolve dividing by zero in 32-bit system
net/mlx4_core: Change the default value of enable_qos
net/mlx4_core: Avoid setting ports to auto when only one port type is supported
net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec
...
|
|
This patch fixes a typo in unregister operation.
Following crash is fixed by this patch. It can be easily reproduced
by repeating modprobe and rmmod module that uses genetlink.
[ 261.446686] BUG: unable to handle kernel paging request at ffffffffa0264088
[ 261.448921] IP: [<ffffffff813cb70e>] strcmp+0xe/0x30
[ 261.450494] PGD 1c09067
[ 261.451266] PUD 1c0a063
[ 261.452091] PMD 8068d5067
[ 261.452525] PTE 0
[ 261.453164]
[ 261.453618] Oops: 0000 [#1] SMP
[ 261.454577] Modules linked in: openvswitch(+) ...
[ 261.480753] RIP: 0010:[<ffffffff813cb70e>] [<ffffffff813cb70e>] strcmp+0xe/0x30
[ 261.483069] RSP: 0018:ffffc90003c0bc28 EFLAGS: 00010282
[ 261.510145] Call Trace:
[ 261.510896] [<ffffffff816f10ca>] genl_family_find_byname+0x5a/0x70
[ 261.512819] [<ffffffff816f2319>] genl_register_family+0xb9/0x630
[ 261.514805] [<ffffffffa02840bc>] dp_init+0xbc/0x120 [openvswitch]
[ 261.518268] [<ffffffff8100217d>] do_one_initcall+0x3d/0x160
[ 261.525041] [<ffffffff811808a9>] do_init_module+0x60/0x1f1
[ 261.526754] [<ffffffff8110687f>] load_module+0x22af/0x2860
[ 261.530144] [<ffffffff81107026>] SYSC_finit_module+0x96/0xd0
[ 261.531901] [<ffffffff8110707e>] SyS_finit_module+0xe/0x10
[ 261.533605] [<ffffffff8100391e>] do_syscall_64+0x6e/0x180
[ 261.535284] [<ffffffff817c2faf>] entry_SYSCALL64_slow_path+0x25/0x25
[ 261.546512] RIP [<ffffffff813cb70e>] strcmp+0xe/0x30
[ 261.550198] ---[ end trace 76505a814dd68770 ]---
Fixes: 2ae0f17df1c ("genetlink: use idr to track families").
Reported-by: Jarno Rajahalme <jarno@ovn.org>
CC: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Among various cleanups and improvements, we have the following:
* client FILS authentication support in mac80211 (Jouni)
* AP/VLAN multicast improvements (Michael Braun)
* config/advertising support for differing beacon intervals on
multiple virtual interfaces (Purushottam Kushwaha, myself)
* deprecate the old WDS mode for cfg80211-based drivers, the
mode is hardly usable since it doesn't support any "modern"
features like WPA encryption (2003), HT (2009) or VHT (2014),
I'm not even sure WEP (introduced in 1997) could be done.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit 2d18ac4ba745 ("tipc: extend broadcast link initialization
criteria") we tried to fix a problem with the initial synchronization
of broadcast link acknowledge values. Unfortunately that solution is
not sufficient to solve the issue.
We have seen it happen that LINK_PROTOCOL/STATE packets with a valid
non-zero unicast acknowledge number may bypass BCAST_PROTOCOL
initialization, NAME_DISTRIBUTOR and other STATE packets with invalid
broadcast acknowledge numbers, leading to premature opening of the
broadcast link. When the bypassed packets finally arrive, they are
inadvertently accepted, and the already correctly initialized
acknowledge number in the broadcast receive link is overwritten by
the invalid (zero) value of the said packets. After this the broadcast
link goes stale.
We now fix this by marking the packets where we know the acknowledge
value is or may be invalid, and then ignoring the acks from those.
To this purpose, we claim an unused bit in the header to indicate that
the value is invalid. We set the bit to 1 in the initial BCAST_PROTOCOL
synchronization packet and all initial ("bulk") NAME_DISTRIBUTOR
packets, plus those LINK_PROTOCOL packets sent out before the broadcast
links are fully synchronized.
This minor protocol update is fully backwards compatible.
Reported-by: John Thompson <thompa.atl@gmail.com>
Tested-by: John Thompson <thompa.atl@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document the possible state transitions for a BBR flow, and also add a
prose summary of the state machine, covering the life of a typical BBR
flow.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This code cleanup patchset includes the following changes (chronological
order):
- bump version strings, by Simon Wunderlich
- README updates/clean up, by Sven Eckelmann (4 patches)
- Code clean up and restructuring by Sven Eckelmann (2 patches)
- Kerneldoc fix in forw_packet structure, by Linus Luessing
- Remove unused argument in dbg_arp, by Antonio Quartulli
- Add support to build batman-adv without wireless, by Linus Luessing
- Restructure error handling for is_ap_isolated, by Markus Elfring
- Remove unused initialization in various functions, by Sven Eckelmann
- Use better names for fragment and gateway list heads, by Sven
Eckelmann (2 patches)
- Convert to octal permissions for files, by Sven Eckelmann
- Avoid precedence issues for some macros, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rds use Kconfig option called "RDS_DEBUG" to enable rds debug messages.
This option cause the rds Makefile to add -DDEBUG to the rds gcc command
line.
When CONFIG_DYNAMIC_DEBUG is enabled, the "DEBUG" macro is used by
include/linux/dynamic_debug.h to decide if dynamic debug prints should
be sent by default to the kernel log.
rds should not enable this macro for production builds. rds dynamic
debug work as expected follow this fix.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just two fixes:
* a fix to process all events while suspending, so any
potential calls into the driver are done before it is
suspended
* small markup fixes for the sphinx documentation conversion
that's coming into the tree via the doc tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev_walk_all_lower_dev is not properly walking the lower device
list. Commit 1a3f060c1a47 made netdev_walk_all_lower_dev similar
to netdev_walk_all_upper_dev_rcu and netdev_walk_all_lower_dev_rcu
but failed to update its netdev_next_lower_dev iterator. This patch
fixes that.
Fixes: 1a3f060c1a47 ("net: Introduce new api for walking upper and
lower devices")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Per listen(fd, backlog) rules, there is really no point accepting a SYN,
sending a SYNACK, and dropping the following ACK packet if accept queue
is full, because application is not draining accept queue fast enough.
This behavior is fooling TCP clients that believe they established a
flow, while there is nothing at server side. They might then send about
10 MSS (if using IW10) that will be dropped anyway while server is under
stress.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simon Wunderlich says:
====================
Here are three batman-adv bugfix patches:
- Fix RCU usage for neighbor list, by Sven Eckelmann
- Fix BATADV_DBG_ALL loglevel to include TP Meter messages, by Sven Eckelmann
- Fix possible splat when disabling an interface, by Linus Luessing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When transmitting on a packet socket with PACKET_VNET_HDR and
PACKET_QDISC_BYPASS, validate device support for features requested
in vnet_hdr.
Drop TSO packets sent to devices that do not support TSO or have the
feature disabled. Note that the latter currently do process those
packets correctly, regardless of not advertising the feature.
Because of SKB_GSO_DODGY, it is not sufficient to test device features
with netif_needs_gso. Full validate_xmit_skb is needed.
Switch to software checksum for non-TSO packets that request checksum
offload if that device feature is unsupported or disabled. Note that
similar to the TSO case, device drivers may perform checksum offload
correctly even when not advertising it.
When switching to software checksum, packets hit skb_checksum_help,
which has two BUG_ON checksum not in linear segment. Packet sockets
always allocate at least up to csum_start + csum_off + 2 as linear.
Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c
ethtool -K eth0 tso off tx on
psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v
psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N
ethtool -K eth0 tx off
psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G
psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N
v2:
- add EXPORT_SYMBOL_GPL(validate_xmit_skb_list)
Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use nla_parse_nested instead of open-coding the call to
nla_parse() with the attribute data/len.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of storing return value in 'err' and returning, just return
directly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wrap several common instances of:
kmemdup(nla_data(attr), nla_len(attr), GFP_KERNEL);
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The newly added raw_diag.c fails to build in some configurations
unless we include this header:
In file included from net/ipv4/raw_diag.c:6:0:
include/net/raw.h:71:21: error: field 'inet' has incomplete type
net/ipv4/raw_diag.c: In function 'raw_diag_dump':
net/ipv4/raw_diag.c:166:29: error: implicit declaration of function 'inet_sk'
Fixes: 432490f9d455 ("net: ip, diag -- Add diag interface for raw sockets")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch updates skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit() when an
IPv6 header is installed to a socket buffer.
This is not a cosmetic change. Without updating this value, GSO packets
transmitted through an ipip6 tunnel have the protocol of ETH_P_IP and
skb_mac_gso_segment() will attempt to call gso_segment() for IPv4,
which results in the packets being dropped.
Fixes: b8921ca83eed ("ip4ip6: Support for GSO/GRO")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As part of a series to implement faster SO_REUSEPORT lookups,
commit 086c653f5862 ("sock: struct proto hash function may error")
added return values to protocol hash functions and
commit 496611d7b5ea ("inet: create IPv6-equivalent inet_hash function")
implemented a new hash function for IPv6. However, the latter does
not respect the former's convention.
This properly propagates the hash errors in the IPv6 case.
Fixes: 496611d7b5ea ("inet: create IPv6-equivalent inet_hash function")
Reported-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrey Konovalov reported that KASAN detected that SCTP was using a slab
beyond the boundaries. It was caused because when handling out of the
blue packets in function sctp_sf_ootb() it was checking the chunk len
only after already processing the first chunk, validating only for the
2nd and subsequent ones.
The fix is to just move the check upwards so it's also validated for the
1st chunk.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We've been seeing some crashes in testing that look like this:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8135ce99>] memcpy_orig+0x29/0x110
PGD 212ca2067 PUD 212ca3067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ppdev parport_pc i2c_piix4 sg parport i2c_core virtio_balloon pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod ata_generic pata_acpi virtio_scsi 8139too ata_piix libata 8139cp mii virtio_pci floppy virtio_ring serio_raw virtio
CPU: 1 PID: 1540 Comm: nfsd Not tainted 4.9.0-rc1 #39
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007
task: ffff88020d7ed200 task.stack: ffff880211838000
RIP: 0010:[<ffffffff8135ce99>] [<ffffffff8135ce99>] memcpy_orig+0x29/0x110
RSP: 0018:ffff88021183bdd0 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff88020d7fa000 RCX: 000000f400000000
RDX: 0000000000000014 RSI: ffff880212927020 RDI: 0000000000000000
RBP: ffff88021183be30 R08: 01000000ef896996 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880211704ca8
R13: ffff88021473f000 R14: 00000000ef896996 R15: ffff880211704800
FS: 0000000000000000(0000) GS:ffff88021fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000212ca1000 CR4: 00000000000006e0
Stack:
ffffffffa01ea087 ffffffff63400001 ffff880215145e00 ffff880211bacd00
ffff88021473f2b8 0000000000000004 00000000d0679d67 ffff880211bacd00
ffff88020d7fa000 ffff88021473f000 0000000000000000 ffff88020d7faa30
Call Trace:
[<ffffffffa01ea087>] ? svc_tcp_recvfrom+0x5a7/0x790 [sunrpc]
[<ffffffffa01f84d8>] svc_recv+0xad8/0xbd0 [sunrpc]
[<ffffffffa0262d5e>] nfsd+0xde/0x160 [nfsd]
[<ffffffffa0262c80>] ? nfsd_destroy+0x60/0x60 [nfsd]
[<ffffffff810a9418>] kthread+0xd8/0xf0
[<ffffffff816dbdbf>] ret_from_fork+0x1f/0x40
[<ffffffff810a9340>] ? kthread_park+0x60/0x60
Code: 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe 7c 35 48 83 ea 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c 8b 5e 18 48 8d 76 20 <4c> 89 07 4c 89 4f 08 4c 89 57 10 4c 89 5f 18 48 8d 7f 20 73 d4
RIP [<ffffffff8135ce99>] memcpy_orig+0x29/0x110
RSP <ffff88021183bdd0>
CR2: 0000000000000000
Both Bruce and Eryu ran a bisect here and found that the problematic
patch was 68778945e46 (SUNRPC: Separate buffer pointers for RPC Call and
Reply messages).
That patch changed rpc_xdr_encode to use a new rq_rbuffer pointer to
set up the receive buffer, but didn't change all of the necessary
codepaths to set it properly. In particular the backchannel setup was
missing.
We need to set rq_rbuffer whenever rq_buffer is set. Ensure that it is.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Fixes: 68778945e46 "SUNRPC: Separate buffer pointers..."
Reported-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Some of the pr_* messages are missing spaces, so insert these and also
unbreak multi-line literal strings in pr_* messages
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2016-10-25
Just a leftover from the last development cycle.
1) Remove some unused code, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Building the ip_vs_sync code with CONFIG_OPTIMIZE_INLINING on x86
confuses the compiler to the point where it produces a rather
dubious warning message:
net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.init_seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
struct ip_vs_sync_conn_options opt;
^~~
net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.previous_delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).init_seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).previous_delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
The problem appears to be a combination of a number of factors, including
the __builtin_bswap32 compiler builtin being slightly odd, having a large
amount of code inlined into a single function, and the way that some
functions only get partially inlined here.
I've spent way too much time trying to work out a way to improve the
code, but the best I've come up with is to add an explicit memset
right before the ip_vs_seq structure is first initialized here. When
the compiler works correctly, this has absolutely no effect, but in the
case that produces the warning, the warning disappears.
In the process of analysing this warning, I also noticed that
we use memcpy to copy the larger ip_vs_sync_conn_options structure
over two members of the ip_vs_conn structure. This works because
the layout is identical, but seems error-prone, so I'm changing
this in the process to directly copy the two members. This change
seemed to have no effect on the object code or the warning, but
it deals with the same data, so I kept the two changes together.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
gcc -Wmaybe-uninitialized reports a bug in aes_siv_encryp:
net/mac80211/fils_aead.c: In function ‘aes_siv_encrypt.constprop’:
net/mac80211/fils_aead.c:84:26: error: ‘tfm2’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
At the time that the memory allocation fails, 'tfm2' has not been
allocated, so we should not attempt to free it later, and we can
simply return an error.
Fixes: 39404feee691 ("mac80211: FILS AEAD protection for station mode association frames")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
No one can see these events, because a network namespace can not be
destroyed, if it has sockets.
Unlike other devices, uevent-s for network devices are generated
only inside their network namespaces. They are filtered in
kobj_bcast_filter()
My experiments shows that net namespaces are destroyed more 30% faster
with this optimization.
Here is a perf output for destroying network namespaces without this
patch.
- 94.76% 0.02% kworker/u48:1 [kernel.kallsyms] [k] cleanup_net
- 94.74% cleanup_net
- 94.64% ops_exit_list.isra.4
- 41.61% default_device_exit_batch
- 41.47% unregister_netdevice_many
- rollback_registered_many
- 40.36% netdev_unregister_kobject
- 14.55% device_del
+ 13.71% kobject_uevent
- 13.04% netdev_queue_update_kobjects
+ 12.96% kobject_put
- 12.72% net_rx_queue_update_kobjects
kobject_put
- kobject_release
+ 12.69% kobject_uevent
+ 0.80% call_netdevice_notifiers_info
+ 19.57% nfsd_exit_net
+ 11.15% tcp_net_metrics_exit
+ 8.25% rpcsec_gss_exit_net
It's very critical to optimize the exit path for network namespaces,
because they are destroyed under net_mutex and many namespaces can be
destroyed for one iteration.
v2: use dev_set_uevent_suppress()
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel says:
While trying out [1][2], I noticed that tc monitor doesn't show the
correct handle on delete:
$ tc monitor
qdisc clsact ffff: dev eno1 parent ffff:fff1
filter dev eno1 ingress protocol all pref 49152 bpf handle 0x2a [...]
deleted filter dev eno1 ingress protocol all pref 49152 bpf handle 0xf3be0c80
some context to explain the above:
The user identity of any tc filter is represented by a 32-bit
identifier encoded in tcm->tcm_handle. Example 0x2a in the bpf filter
above. A user wishing to delete, get or even modify a specific filter
uses this handle to reference it.
Every classifier is free to provide its own semantics for the 32 bit handle.
Example: classifiers like u32 use schemes like 800:1:801 to describe
the semantics of their filters represented as hash table, bucket and
node ids etc.
Classifiers also have internal per-filter representation which is different
from this externally visible identity. Most classifiers set this
internal representation to be a pointer address (which allows fast retrieval
of said filters in their implementations). This internal representation
is referenced with the "fh" variable in the kernel control code.
When a user successfuly deletes a specific filter, by specifying the correct
tcm->tcm_handle, an event is generated to user space which indicates
which specific filter was deleted.
Before this patch, the "fh" value was sent to user space as the identity.
As an example what is shown in the sample bpf filter delete event above
is 0xf3be0c80. This is infact a 32-bit truncation of 0xffff8807f3be0c80
which happens to be a 64-bit memory address of the internal filter
representation (address of the corresponding filter's struct cls_bpf_prog);
After this patch the appropriate user identifiable handle as encoded
in the originating request tcm->tcm_handle is generated in the event.
One of the cardinal rules of netlink rules is to be able to take an
event (such as a delete in this case) and reflect it back to the
kernel and successfully delete the filter. This patch achieves that.
Note, this issue has existed since the original TC action
infrastructure code patch back in 2004 as found in:
https://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/
[1] http://patchwork.ozlabs.org/patch/682828/
[2] http://patchwork.ozlabs.org/patch/682829/
Fixes: 4e54c4816bfe ("[NET]: Add tc extensions infrastructure.")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gcc warns about an uninitialized pointer dereference in the vlan
priority handling:
net/core/flow_dissector.c: In function '__skb_flow_dissect':
net/core/flow_dissector.c:281:61: error: 'vlan' may be used uninitialized in this function [-Werror=maybe-uninitialized]
As pointed out by Jiri Pirko, the variable is never actually used
without being initialized first as the only way it end up uninitialized
is with skb_vlan_tag_present(skb)==true, and that means it does not
get accessed.
However, the warning hints at some related issues that I'm addressing
here:
- the second check for the vlan tag is different from the first one
that tests the skb for being NULL first, causing both the warning
and a possible NULL pointer dereference that was not entirely fixed.
- The same patch that introduced the NULL pointer check dropped an
earlier optimization that skipped the repeated check of the
protocol type
- The local '_vlan' variable is referenced through the 'vlan' pointer
but the variable has gone out of scope by the time that it is
accessed, causing undefined behavior
Caching the result of the 'skb && skb_vlan_tag_present(skb)' check
in a local variable allows the compiler to further optimize the
later check. With those changes, the warning also disappears.
Fixes: 3805a938a6c2 ("flow_dissector: Check skb for VLAN only if skb specified.")
Fixes: d5709f7ab776 ("flow_dissector: For stripped vlan, get vlan info from skb->vlan_tci")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Eric Garver <e@erig.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to IPv4, do not consider link state when validating next hops.
Currently, if the link is down default routes can fail to insert:
$ ip -6 ro add vrf blue default via 2100:2::64 dev eth2
RTNETLINK answers: No route to host
With this patch the command succeeds.
Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rt6_add_route_info and rt6_add_dflt_router were updated to pull the FIB
table from the device index, but the corresponding rt6_get_route_info
and rt6_get_dflt_router functions were not leading to the failure to
process RA's:
ICMPv6: RA: ndisc_router_discovery failed to add default route
Fix the 'get' functions by using the table id associated with the
device when applicable.
Also, now that default routes can be added to tables other than the
default table, rt6_purge_dflt_routers needs to be updated as well to
look at all tables. To handle that efficiently, add a flag to the table
denoting if it is has a default route via RA.
Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now genl_register_family() is the only thing (other than the
users themselves, perhaps, but I didn't find any doing that)
writing to the family struct.
In all families that I found, genl_register_family() is only
called from __init functions (some indirectly, in which case
I've add __init annotations to clarifly things), so all can
actually be marked __ro_after_init.
This protects the data structure from accidental corruption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since generic netlink family IDs are small integers, allocated
densely, IDR is an ideal match for lookups. Replace the existing
hand-written hash-table with IDR for allocation and lookup.
This lets the families only be written to once, during register,
since the list_head can be removed and removal of a family won't
cause any writes.
It also slightly reduces the code size (by about 1.3k on x86-64).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of providing macros/inline functions to initialize
the families, make all users initialize them statically and
get rid of the macros.
This reduces the kernel code size by about 1.6k on x86-64
(with allyesconfig).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Static family IDs have never really been used, the only
use case was the workaround I introduced for those users
that assumed their family ID was also their multicast
group ID.
Additionally, because static family IDs would never be
reserved by the generic netlink code, using a relatively
low ID would only work for built-in families that can be
registered immediately after generic netlink is started,
which is basically only the control family (apart from
the workaround code, which I also had to add code for so
it would reserve those IDs)
Thus, anything other than GENL_ID_GENERATE is flawed and
luckily not used except in the cases I mentioned. Move
those workarounds into a few lines of code, and then get
rid of GENL_ID_GENERATE entirely, making it more robust.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This helper function allows family implementations to access
their family's attrbuf. This gets rid of the attrbuf usage
in families, and also adds locking validation, since it's not
valid to use the attrbuf with parallel_ops or outside of the
dumpit callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The user may want to use only some bits of the skb mark in
his skbedit rules because the remaining part might be used by
something else.
Introduce the "mask" parameter to the skbedit actor in order
to implement such functionality.
When the mask is specified, only those bits selected by the
latter are altered really changed by the actor, while the
rest is left untouched.
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nft_parse_u32_check
Commit 36b701fae12ac ("netfilter: nf_tables: validate maximum value of
u32 netlink attributes") introduced nft_parse_u32_check with a return
value of "unsigned int", yet on error it returns "-ERANGE".
This patch corrects the mismatch by changing the return value to "int",
which happens to match the actual users of nft_parse_u32_check already.
Found by Coverity, CID 1373930.
Note that commit 21a9e0f1568ea ("netfilter: nft_exthdr: fix error
handling in nft_exthdr_init()) attempted to address the issue, but
did not address the return type of nft_parse_u32_check.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Laura Garcia Liebana <nevola@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 36b701fae12ac ("netfilter: nf_tables: validate maximum value...")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
