summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-08-20gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPYMark Tomlinson
When receiving an IPv4 packet inside an IPv6 GRE packet, and the IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would get corrupted. This is due to the common ip6_tnl_rcv() function assuming that the inner header is always IPv6. This patch checks the tunnel protocol for IPv4 inner packets, but still defaults to IPv6. Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20ethtool: allow flow-type ether without IP protocol fieldVishal Kulkarni
Set IP protocol mask only when IP protocol field is set. This will allow flow-type ether with vlan rule which don't have protocol field to apply. ethtool -N ens5f4 flow-type ether proto 0x8100 vlan 0x600\ m 0x1FFF action 3 loc 16 Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20net: zerocopy: combine pages in zerocopy_sg_from_iter()Eric Dumazet
Currently, tcp sendmsg(MSG_ZEROCOPY) is building skbs with order-0 fragments. Compared to standard sendmsg(), these skbs usually contain up to 16 fragments on arches with 4KB page sizes, instead of two. This adds considerable costs on various ndo_start_xmit() handlers, especially when IOMMU is in the picture. As high performance applications are often using huge pages, we can try to combine adjacent pages belonging to same compound page. Tested on AMD Rome platform, with IOMMU, nominal single TCP flow speed is roughly doubled (~55Gbit -> ~100Gbit), when user application is using hugepages. For reference, nominal single TCP flow speed on this platform without MSG_ZEROCOPY is ~65Gbit. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20bpf: xdp: Fix XDP mode when no mode flags specifiedAndrii Nakryiko
7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") inadvertently changed which XDP mode is assumed when no mode flags are specified explicitly. Previously, driver mode was preferred, if driver supported it. If not, generic SKB mode was chosen. That commit changed default to SKB mode always. This patch fixes the issue and restores the original logic. Fixes: 7f0a838254bd ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device") Reported-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/bpf/20200820052841.1559757-1-andriin@fb.com
2020-08-20csum_partial_copy_nocheck(): drop the last argumentAl Viro
It's always 0. Note that we theoretically could use ~0U as well - result will be the same modulo 0xffff, _if_ the damn thing did the right thing for any value of initial sum; later we'll make use of that when convenient. However, unlike csum_and_copy_..._user(), there are instances that did not work for arbitrary initial sums; c6x is one such. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20icmp_push_reply(): reorder adding the checksum upAl Viro
do csum_partial_copy_nocheck() on the first fragment, then add the rest to it. Equivalent transformation. That was the only caller of csum_partial_copy_nocheck() that might pass it non-zero as the last argument. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20skb_copy_and_csum_bits(): don't bother with the last argumentAl Viro
it's always 0 Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-20net/smc: Prevent kernel-infoleak in __smc_diag_dump()Peilin Ye
__smc_diag_dump() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 4-byte hole near the beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo` with memset(). Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-20rxrpc: Make rxrpc_kernel_get_srtt() indicate validityDavid Howells
Fix rxrpc_kernel_get_srtt() to indicate the validity of the returned smoothed RTT. If we haven't had any valid samples yet, the SRTT isn't useful. Fixes: c410bf01933e ("rxrpc: Fix the excessive initial retransmission timeout") Signed-off-by: David Howells <dhowells@redhat.com>
2020-08-20rxrpc: Fix loss of RTT samples due to interposed ACKDavid Howells
The Rx protocol has a mechanism to help generate RTT samples that works by a client transmitting a REQUESTED-type ACK when it receives a DATA packet that has the REQUEST_ACK flag set. The peer, however, may interpose other ACKs before transmitting the REQUESTED-ACK, as can be seen in the following trace excerpt: rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0 ... DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the sequence number of the DATA packet), causing it to be discarded from the Tx ring. The ACK that was requested (labelled REQ, r=xx references the serial of the DATA packet) comes after the ping, but the sk_buff holding the timestamp has gone and the RTT sample is lost. This is particularly noticeable on RPC calls used to probe the service offered by the peer. A lot of peers end up with an unknown RTT because we only ever sent a single RPC. This confuses the server rotation algorithm. Fix this by caching the information about the outgoing packet in RTT calculations in the rxrpc_call struct rather than looking in the Tx ring. A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and PING-ACK transmissions are recorded in there. When the appropriate response ACK is received, the buffer is checked for a match and, if found, an RTT sample is recorded. If a received ACK refers to a packet with a later serial number than an entry in the cache, that entry is presumed lost and the entry is made available to record a new transmission. ACKs types other than REQUESTED-type and PING-type cause any matching sample to be cancelled as they don't necessarily represent a useful measurement. If there's no space in the buffer on ping/data transmission, the sample base is discarded. Fixes: 50235c4b5a2f ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets") Signed-off-by: David Howells <dhowells@redhat.com>
2020-08-20rxrpc: Keep the ACK serial in a var in rxrpc_input_ack()David Howells
Keep the ACK serial number in a variable in rxrpc_input_ack() as it's used frequently. Signed-off-by: David Howells <dhowells@redhat.com>
2020-08-20nl80211: fix NL80211_ATTR_HE_6GHZ_CAPABILITY usageJohannes Berg
In nl80211_set_station(), we check NL80211_ATTR_HE_6GHZ_CAPABILITY and then use NL80211_ATTR_HE_CAPABILITY, which is clearly wrong. Fix this to use NL80211_ATTR_HE_6GHZ_CAPABILITY as well. Cc: stable@vger.kernel.org Fixes: 43e64bf301fd ("cfg80211: handle 6 GHz capability of new station") Link: https://lore.kernel.org/r/20200805153516.310cef625955.I0abc04dc8abb2c7c005c88ef8fa2d0e3c9fb95c4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-20bpf: Add kernel module with user mode driver that populates bpffs.Alexei Starovoitov
Add kernel module with user mode driver that populates bpffs with BPF iterators. $ mount bpffs /my/bpffs/ -t bpf $ ls -la /my/bpffs/ total 4 drwxrwxrwt 2 root root 0 Jul 2 00:27 . drwxr-xr-x 19 root root 4096 Jul 2 00:09 .. -rw------- 1 root root 0 Jul 2 00:27 maps.debug -rw------- 1 root root 0 Jul 2 00:27 progs.debug The user mode driver will load BPF Type Formats, create BPF maps, populate BPF maps, load two BPF programs, attach them to BPF iterators, and finally send two bpf_link IDs back to the kernel. The kernel will pin two bpf_links into newly mounted bpffs instance under names "progs.debug" and "maps.debug". These two files become human readable. $ cat /my/bpffs/progs.debug id name attached 11 dump_bpf_map bpf_iter_bpf_map 12 dump_bpf_prog bpf_iter_bpf_prog 27 test_pkt_access 32 test_main test_pkt_access test_pkt_access 33 test_subprog1 test_pkt_access_subprog1 test_pkt_access 34 test_subprog2 test_pkt_access_subprog2 test_pkt_access 35 test_subprog3 test_pkt_access_subprog3 test_pkt_access 36 new_get_skb_len get_skb_len test_pkt_access 37 new_get_skb_ifindex get_skb_ifindex test_pkt_access 38 new_get_constant get_constant test_pkt_access The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about all BPF programs currently loaded in the system. This information is unstable and will change from kernel to kernel as ".debug" suffix conveys. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
2020-08-20netfilter: conntrack: allow sctp hearbeat after connection re-useFlorian Westphal
If an sctp connection gets re-used, heartbeats are flagged as invalid because their vtag doesn't match. Handle this in a similar way as TCP conntrack when it suspects that the endpoints and conntrack are out-of-sync. When a HEARTBEAT request fails its vtag validation, flag this in the conntrack state and accept the packet. When a HEARTBEAT_ACK is received with an invalid vtag in the reverse direction after we allowed such a HEARTBEAT through, assume we are out-of-sync and re-set the vtag info. v2: remove left-over snippet from an older incarnation that moved new_state/old_state assignments, thats not needed so keep that as-is. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-08-19ptp: Add generic ptp v2 header parsing functionKurt Kanzenbach
Reason: A lot of the ptp drivers - which implement hardware time stamping - need specific fields such as the sequence id from the ptp v2 header. Currently all drivers implement that themselves. Introduce a generic function to retrieve a pointer to the start of the ptp v2 header. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19netlink: fix state reallocation in policy exportJohannes Berg
Evidently, when I did this previously, we didn't have more than 10 policies and didn't run into the reallocation path, because it's missing a memset() for the unused policies. Fix that. Fixes: d07dcf9aadd6 ("netlink: add infrastructure to expose policies to userspace") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19net: Stop warning about SO_BSDCOMPAT usageMiaohe Lin
We've been warning about SO_BSDCOMPAT usage for many years. We may remove this code completely now. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19SUNRPC: remove duplicate includeWang Hai
Remove linux/sunrpc/auth_gss.h which is included more than once Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-08-18net: ipv4: remove duplicate "the the" phrase in Kconfig textColin Ian King
The Kconfig help text contains the phrase "the the" in the help text. Fix this and reformat the block of help text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ethtool: Don't omit the netlink reply if no features were changedMaxim Mikityanskiy
The legacy ethtool userspace tool shows an error when no features could be changed. It's useful to have a netlink reply to be able to show this error when __netdev_update_features wasn't called, for example: 1. ethtool -k eth0 large-receive-offload: off 2. ethtool -K eth0 rx-fcs on 3. ethtool -K eth0 lro on Could not change any device features rx-lro: off [requested on] 4. ethtool -K eth0 lro on # The output should be the same, but without this patch the kernel # doesn't send the reply, and ethtool is unable to detect the error. This commit makes ethtool-netlink always return a reply when requested, and it still avoids unnecessary calls to __netdev_update_features if the wanted features haven't changed. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ethtool: Account for hw_features in netlink interfaceMaxim Mikityanskiy
ethtool-netlink ignores dev->hw_features and may confuse the drivers by asking them to enable features not in the hw_features bitmask. For example: 1. ethtool -k eth0 tls-hw-tx-offload: off [fixed] 2. ethtool -K eth0 tls-hw-tx-offload on tls-hw-tx-offload: on 3. ethtool -k eth0 tls-hw-tx-offload: on [fixed] Fitler out dev->hw_features from req_wanted to fix it and to resemble the legacy ethtool behavior. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ethtool: Fix preserving of wanted feature bits in netlink interfaceMaxim Mikityanskiy
Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18ipv6: some fixes for ipv6_dev_find()Xin Long
This patch is to do 3 things for ipv6_dev_find(): As David A. noticed, - rt6_lookup() is not really needed. Different from __ip_dev_find(), ipv6_dev_find() doesn't have a compatibility problem, so remove it. As Hideaki suggested, - "valid" (non-tentative) check for the address is also needed. ipv6_chk_addr() calls ipv6_chk_addr_and_flags(), which will traverse the address hash list, but it's heavy to be called inside ipv6_dev_find(). This patch is to reuse the code of ipv6_chk_addr_and_flags() for ipv6_dev_find(). - dev parameter is passed into ipv6_dev_find(), as link-local addresses from user space has sin6_scope_id set and the dev lookup needs it. Fixes: 81f6cb31222d ("ipv6: add ipv6_dev_find()") Suggested-by: YOSHIFUJI Hideaki <hideaki.yoshifuji@miraclelinux.com> Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18net: handle the return value of pskb_carve_frag_list() correctlyMiaohe Lin
pskb_carve_frag_list() may return -ENOMEM in pskb_carve_inside_nonlinear(). we should handle this correctly or we would get wrong sk_buff. Fixes: 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18net: eliminate meaningless memcpy to data in pskb_carve_inside_nonlinear()Miaohe Lin
The frags of skb_shared_info of the data is assigned in following loop. It is meaningless to do a memcpy of frags here. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18net: tipc: Convert to use the preferred fallthrough macroMiaohe Lin
Convert the uses of fallthrough comments to fallthrough macro. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18netlink: make NLA_BINARY validation more flexibleJohannes Berg
Add range validation for NLA_BINARY, allowing validation of any combination of combination minimum or maximum lengths, using the existing NLA_POLICY_RANGE()/NLA_POLICY_FULL_RANGE() macros, just like for integers where the value is checked. Also make NLA_POLICY_EXACT_LEN(), NLA_POLICY_EXACT_LEN_WARN() and NLA_POLICY_MIN_LEN() special cases of this, removing the old types NLA_EXACT_LEN and NLA_MIN_LEN. This allows us to save some code where both minimum and maximum lengths are requires, currently the policy only allows maximum (NLA_BINARY), minimum (NLA_MIN_LEN) or exact (NLA_EXACT_LEN), so a range of lengths cannot be accepted and must be checked by the code that consumes the attributes later. Also, this allows advertising the correct ranges in the policy export to userspace. Here, NLA_MIN_LEN and NLA_EXACT_LEN already were special cases of NLA_BINARY with min and min/max length respectively. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18netlink: consistently use NLA_POLICY_MIN_LEN()Johannes Berg
Change places that open-code NLA_POLICY_MIN_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18netlink: consistently use NLA_POLICY_EXACT_LEN()Johannes Berg
Change places that open-code NLA_POLICY_EXACT_LEN() to use the macro instead, giving us flexibility in how we handle the details of the macro. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-18batman-adv: bla: use netif_rx_ni when not in interrupt contextJussi Kivilinna
batadv_bla_send_claim() gets called from worker thread context through batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that case. This fixes "NOHZ: local_softirq_pending 08" log messages seen when batman-adv is enabled. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-18batman-adv: Fix own OGM check in aggregated OGMsLinus Lüssing
The own OGM check is currently misplaced and can lead to the following issues: For one thing we might receive an aggregated OGM from a neighbor node which has our own OGM in the first place. We would then not only skip our own OGM but erroneously also any other, following OGM in the aggregate. For another, we might receive an OGM aggregate which has our own OGM in a place other then the first one. Then we would wrongly not skip this OGM, leading to populating the orginator and gateway table with ourself. Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-18batman-adv: Avoid uninitialized chaddr when handling DHCPSven Eckelmann
The gateway client code can try to optimize the delivery of DHCP packets to avoid broadcasting them through the whole mesh. But also transmissions to the client can be optimized by looking up the destination via the chaddr of the DHCP packet. But the chaddr is currently only done when chaddr is fully inside the non-paged area of the skbuff. Otherwise it will not be initialized and the unoptimized path should have been taken. But the implementation didn't handle this correctly. It didn't retrieve the correct chaddr but still tried to perform the TT lookup with this uninitialized memory. Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-18batman-adv: Migrate to linux/prandom.hSven Eckelmann
The commit c0842fbc1b18 ("random32: move the pseudo-random 32-bit definitions to prandom.h") introduced a new header for the pseudo random functions from (previously) linux/random.h. One future goal of the prandom.h change is to make code to switch just the new header file and to avoid the implicit include. This would allow the removal of the implicit include from random.h Signed-off-by: Sven Eckelmann <sven@narfation.org>
2020-08-18batman-adv: Drop repeated words in commentsSven Eckelmann
checkpatch found various instances of "Possible repeated word" in various comments. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-18batman-adv: types.h: delete duplicated wordsRandy Dunlap
Delete the doubled word "time" in a comment. Delete the doubled word "address" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-18batman-adv: Drop unused function batadv_hardif_remove_interfaces()Sven Eckelmann
The function batadv_hardif_remove_interfaces was meant to remove all interfaces which are currently in the list of known (compatible) hardifs during module unload. But the function unregister_netdevice_notifier is called in batadv_exit before batadv_hardif_remove_interfaces. This will trigger NETDEV_UNREGISTER events for all available interfaces and in this process remove all interfaces from batadv_hardif_list. And batadv_hardif_remove_interfaces only operated on this (empty) list. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-18batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2020-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ...
2020-08-17net: qrtr: fix usage of idr in port assignment to socketNecip Fazil Yildiran
Passing large uint32 sockaddr_qrtr.port numbers for port allocation triggers a warning within idr_alloc() since the port number is cast to int, and thus interpreted as a negative number. This leads to the rejection of such valid port numbers in qrtr_port_assign() as idr_alloc() fails. To avoid the problem, switch to idr_alloc_u32() instead. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com Signed-off-by: Necip Fazil Yildiran <necip@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"David S. Miller
This reverts commit f8414a8d886b613b90d9fdf7cda6feea313b1069. eth_type_trans() does the necessary pull on the skb. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17espintcp: restore IP CB before handing the packet to xfrmSabrina Dubroca
Xiumei reported a bug with espintcp over IPv6 in transport mode, because xfrm6_transport_finish expects to find IP6CB data (struct inet6_skb_cb). Currently, espintcp zeroes the CB, but the relevant part is actually preserved by previous layers (first set up by tcp, then strparser only zeroes a small part of tcp_skb_tb), so we can just relocate it to the start of skb->cb. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2020-08-16mptcp: sendmsg: reset iter on error reduxFlorian Westphal
This fix wasn't correct: When this function is invoked from the retransmission worker, the iterator contains garbage and resetting it causes a crash. As the work queue should not be performance critical also zero the msghdr struct. Fixes: 35759383133f64d "(mptcp: sendmsg: reset iter on error)" Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16net: devlink: Remove overzealous WARN_ON with snapshotsAndrew Lunn
It is possible to trigger this WARN_ON from user space by triggering a devlink snapshot with an ID which already exists. We don't need both -EEXISTS being reported and spamming the kernel log. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16tipc: not enable tipc when ipv6 works as a moduleXin Long
When using ipv6_dev_find() in one module, it requires ipv6 not to work as a module. Otherwise, this error occurs in build: undefined reference to `ipv6_dev_find'. So fix it by adding "depends on IPV6 || IPV6=n" to tipc/Kconfig, as it does in sctp/Kconfig. Fixes: 5a6f6f579178 ("tipc: set ub->ifindex for local ipv6 address") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16tipc: fix uninit skb->data in tipc_nl_compat_dumpit()Cong Wang
__tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea67769ff33 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Richard Alpe <richard.alpe@ericsson.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Endianness issue in IPv4 option support in nft_exthdr, from Stephen Suryaputra. 2) Removes the waitcount optimization in nft_compat, from Florian Westphal. 3) Remove ipv6 -> nf_defrag_ipv6 module dependency, from Florian Westphal. 4) Memleak in chain binding support, also from Florian. 5) Simplify nft_flowtable.sh selftest, from Fabian Frederick. 6) Optional MTU arguments for selftest nft_flowtable.sh, also from Fabian. 7) Remove noise error report when killing process in selftest nft_flowtable.sh, from Fabian Frederick. 8) Reject bogus getsockopt option length in ebtables, from Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16Merge tag 'linux-can-fixes-for-5.9-20200815' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-08-15 this is a pull request of 4 patches for net/master. All patches are by Zhang Changzhong and fix broadcast related problems in the j1939 CAN networking stack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16net: Fix potential wrong skb->protocol in skb_vlan_untag()Miaohe Lin
We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or we may access the wrong data. Fixes: 0d5501c1c828 ("net: Always untag vlan-tagged traffic on input.") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16net: xdp: pull ethernet header off packet after computing skb->protocolJason A. Donenfeld
When an XDP program changes the ethernet header protocol field, eth_type_trans is used to recalculate skb->protocol. In order for eth_type_trans to work correctly, the ethernet header must actually be part of the skb data segment, so the code first pushes that onto the head of the skb. However, it subsequently forgets to pull it back off, making the behavior of the passed-on packet inconsistent between the protocol modifying case and the static protocol case. This patch fixes the issue by simply pulling the ethernet header back off of the skb head. Fixes: 297249569932 ("net: fix generic XDP to handle if eth header was mangled") Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-15Merge tag '9p-for-5.9-rc1' of git://github.com/martinetd/linuxLinus Torvalds
Pull 9p updates from Dominique Martinet: - some code cleanup - a couple of static analysis fixes - setattr: try to pick a fid associated with the file rather than the dentry, which might sometimes matter * tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux: 9p: Remove unneeded cast from memory allocation 9p: remove unused code in 9p net/9p: Fix sparse endian warning in trans_fd.c 9p: Fix memory leak in v9fs_mount 9p: retrieve fid from file when file instance exist.
generated by cgit (git 2.34.1) at 2025-09-15 18:09:33 +0000