| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an NFS/RDMA performance regression in v6.9-rc
* tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
|
|
When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.
When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().
To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 1eeb50435739 ("tcp/dccp: do not care about
families in inet_twsk_purge()") tcp_twsk_purge() is
no longer potentially called from a module.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
First problem is a double call to __in_dev_get_rcu(), because
the second one could return NULL.
if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
Second problem is a read from dev->ip6_ptr with no NULL check:
if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))
Use the correct RCU API to fix these.
v2: add missing include <net/addrconf.h>
Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Performance regression reported with NFS/RDMA using Omnipath,
bisected to commit e084ee673c77 ("svcrdma: Add Write chunk WRs to
the RPC's Send WR chain").
Tracing on the server reports:
nfsd-7771 [060] 1758.891809: svcrdma_sq_post_err:
cq.id=205 cid=226 sc_sq_avail=13643/851 status=-12
sq_post_err reports ENOMEM, and the rdma->sc_sq_avail (13643) is
larger than rdma->sc_sq_depth (851). The number of available Send
Queue entries is always supposed to be smaller than the Send Queue
depth. That seems like a Send Queue accounting bug in svcrdma.
As it's getting to be late in the 6.9-rc cycle, revert this commit.
It can be revisited in a subsequent kernel release.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218743
Fixes: e084ee673c77 ("svcrdma: Add Write chunk WRs to the RPC's Send WR chain")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.
Fixes: 2e8de8576343 ("udp: add gso segment cmsg")
Signed-off-by: Yick Xie <yick.xie@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240418170610.867084-1-yick.xie@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
neigh_dump_table() is already relying on RCU protection.
pneigh_dump_table() is using its own protection (tbl->lock)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change neigh_dump_table() and pneigh_dump_table()
to either return 0 or -EMSGSIZE if not enough
space was available in the skb.
Then neigh_dump_info() can do the same.
This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to remove RTNL protection from neightbl_dump_info()
and neigh_dump_info() later, we need to add
RCU protection to neigh_tables[].
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the last member in struct rps_dev_flow which should be
protected locklessly. So finish it.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we can see, rflow->filter can be written/read concurrently, so
lockless access is needed.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removing one unnecessary reader protection and add another writer
protection to finish the locklessly proctection job.
Note: the removed READ_ONCE() is not needed because we only have to protect
the locklessly reader in the different context (rps_may_expire_flow()).
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, skbprio_dump() can use READ_ONCE()
annotation, paired with WRITE_ONCE() one in skbprio_change().
Also add a READ_ONCE(sch->limit) in skbprio_enqueue().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, pie_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in pie_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, hhf_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in hhf_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, hfsc_dump_qdisc() can use READ_ONCE()
annotation, paired with WRITE_ONCE() one in hfsc_change_qdisc().
Use READ_ONCE(q->defcls) in hfsc_classify() to
no longer acquire qdisc lock from hfsc_change_qdisc().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, fq_pie_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in fq_pie_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, fq_codel_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in fq_codel_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, __fifo_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in __fifo_init().
Also add missing READ_ONCE(sh->limit) in bfifo_enqueue(),
pfifo_enqueue() and pfifo_tail_enqueue().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, ets_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in ets_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, codel_dump() can use READ_ONCE()
annotations.
There is no etf_change() yet, this patch imply aligns
this qdisc with others.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, codel_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in codel_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, choke_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in choke_change().
v2: added a WRITE_ONCE(p->Scell_log, Scell_log)
per Simon feedback in V1
Removed the READ_ONCE(q->limit) in choke_enqueue()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, cbs_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in cbs_change().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, cake_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() ones in cake_change().
v2: addressed Simon feedback in V1: https://lore.kernel.org/netdev/20240417083549.GA3846178@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of relying on RTNL, fq_dump() can use READ_ONCE()
annotations, paired with WRITE_ONCE() in fq_change()
v2: Addressed Simon feedback in V1: https://lore.kernel.org/netdev/20240416181915.GT2320920@kernel.org/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During non-STA management Tx, when source address is same as one of the
link addresses and even when userspace requested Tx on a specific link,
the link ID is not set in the TX control information. Now if the MLD
address is also the same as that of the link address, then mac80211
fills link as "unspecified", since it looks like MLD TX.
This is unexpected, however, since non-STA TX must specify which link
to use. In hwsim, this will (after warnings) result in dropping such
frames as well.
Use and set the link id if the link bss is matching the address and
requested channel.
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240410052705.169865-1-quic_adisi@quicinc.com
Link: https://lore.kernel.org/r/0496fb7e-53cc-476f-8052-985d82fd8d01@quicinc.com
[reword commit message, should spell out hwsim etc.]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently whenever link AP beacon is assigned, sdata->u.ap.active flag is
set and whenever it is brought down, the flag is reset. However, with MLO,
all the links of the same MLD would use the same sdata. Hence there is no
need to set/reset for each link up/down. Also, resetting it when only one
of the links went down is not desirable.
Add changes to set the active flag only when first link is assigned
beacon. Similarly, add changes to reset that flag only when last link is
brought down.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240409094017.3165560-1-quic_adisi@quicinc.com
[remove unnecessary check before constant true assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add return value documentation for regulatory functions
that are missing it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The return value of regulatory_hint_indoor() is always 0 for
success, and the return value of regulatory_hint_found_beacon()
is always ignored. Make them both have void return.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use the Return: annotation instead of spelling out "Returns" in
the documentation, for both sta_info_flush()/__sta_info_flush().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the unlikely event that link_use_channel fails while activating a
link, mac80211 would go into a bad state. Unfortunately, we cannot
completely avoid failures from drivers in this case.
However, what we can do is to just continue internally anyway and assume
the driver is going to trigger a recovery flow from its side. Doing that
means that we at least have a consistent state in mac80211 allowing such
a recovery flow to succeed.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.1129e89f4b55.I6299678353e50e88b55c99b0bce15c64b52c2804@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's no need for a label/goto here, the only thing is
that drv_assign_vif_chanctx() must succeed to set 'conf'
and add the new context to the list, the remaining code
is (and must be) the same regardless.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.a94852030d33.I9d647178ab25636372ed79e5312c68a06e0bf60c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When searching for a chanctx for re-use, it's later adjusted and
assigned. It may also be that another one is already assigned to
the link in question, so unassign can also happen. In short, the
driver is called multiple times. During these callbacks, it may
thus change active links (on another interface), which then can
in turn cause the found chanctx (that's going to be reused) to
get removed and freed.
To avoid this, temporarily assign it to the reserved chanctx and
track the link that wants to use it in the reserved_links list.
This causes the ieee80211_chanctx_refcount() to be increased by
one during these operations, thus avoiding the free.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240418115219.94ea84c8ee1e.I0b247dbc0cd937ae6367bc0fc7e8d156b5d5f9b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a link switch work was queued, and then a restart happened, the
worker might be executed before the reconfig, and obviously it will fail
(the HW might not respond to updates etc.)
So, don't perform the switch if we are in reconfig, instead - do it
at the end of the reconfig.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.1ef1008e3a0a.I19add3f2152dcfd55a759de97b1d09265c1cde98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's an issue in that when we disconnect from an AP
due to the AP switching to an unsupported channel, we
might not tell the driver about this before we try to
send the deauth. If the underlying implementation has
detected the quiet CSA, this may cause issues if this
is the only active link. Avoid this by transmitting
(and flushing) the deauth only when there's an active
link available that's not affected by quiet CSA.
Since this introduces link->u.mgd.csa_blocked_tx and we
no longer check sdata->csa_blocked_tx for the TX itself
also rename the latter to csa_blocked_queues.
Fixes: 6f0107d195a8 ("wifi: mac80211: introduce a feature flag for quiet in CSA")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415112355.1d91db5e95aa.Iad3a5df3367f305dff48cd61776abfd6cf0fd4ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The AP removal timer field need not be aligned, so the
code shouldn't access it directly, but use unaligned
loads. Use get_unaligned_le16(), which even is shorter
than the current code since it doesn't need a cast.
Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.356788ba0045.I2b3cdb3644e205d5bb10322c345c0499171cf5d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the AP removal timer is long, we don't really want to
remove the link immediately. However, we really should do
it _before_ the AP removes it (which happens at or after
count reaches 0), so subtract 1 from the countdown when
scheduling the timer. This causes the link removal work
to run just after the beacon with value 1 is received. If
the counter is already zero, do it immediately.
This fixes an issue where we do the removal too late and
receive a beacon from the AP that's no longer associated
with the MLD, but thus removed EHT and ML elements, and
then we disconnect instead from the whole MLD, since one
of the associated APs changed mode from EHT to HE.
Fixes: 8eb8dd2ffbbb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.03ac4a09fa74.Ifb8c8d38e3402721a81ce5981568f47b5c5889cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the parsing fails, we can dereference a NULL pointer here.
Cc: stable@vger.kernel.org
Fixes: be29b99a9b51 ("cfg80211/nl80211: Add packet coalesce support")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.b328f80406e7.Id75d961050deb05b3e4e354e024866f350c68103@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the AP mode ends up being determined less than the client mode,
there may be different reasons for this, e.g. AP misconfiguration.
If this happens in a way that causes e.g. EHT to be rejected, the
elements need to be re-parsed since we'll connect as HE, but not
reparsing means that we'll still think it's OK to use multi-link,
so we can connect in a non-sensical configuration of advertising
only HE on a secondary link. This normally won't happen for the
assoc link because that reuses the mode from authentication, and
if that's not EHT, multi-link association is rejected.
Fix this inconsistency by parsing the elements again if the mode
was different from the first parsing attempt. Print the message a
bit later to avoid printing "determined AP ... to be HE" twice in
cases where ieee80211_determine_ap_chan() returned a lesser mode,
rather than the regulatory downgrades below changing it.
Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.d1f25d92cfe7.Ia21eff6cdcae2f5aca13cf8e742a986af5e70f89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When re-parsing the elements here (with changed mode), free
the original ones first to avoid leaking memory.
Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.458421e3bbff.Icb5b84cba3ea420794cf009cf18ec3d76e434736@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When doing re-parsing in ieee80211_determine_chan_mode(),
the conn->mode is changed, and the whole point of doing
the parsing again was to parse as the downgraded mode.
However, that didn't actually work, because the setting
was copied before and never changed again. Fix that.
Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.5e0d1fcb5622.Ib0673e0bc90033fd6d387b6a5f107c040eb907cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The vif's idle state doesn't automatically go to true when
any link removes the channel context, it's only idle when
_all_ links no longer have a channel context. Fix that.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240418105220.90df97557702.I05d2228ce85c203b9f2d6da8538cc16dce46752a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add PSE PoE interface support in the ethtool pse command.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-3-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 amends a missing spot where the set iterator type is unset.
This is fixing a issue in the previous pull request.
Patch #2 fixes the delete set command abort path by restoring state
of the elements. Reverse logic for the activate (abort) case
otherwise element state is not restored, this requires to move
the check for active/inactive elements to the set iterator
callback. From the deactivate path, toggle the next generation
bit and from the activate (abort) path, clear the next generation
bitmask.
Patch #3 skips elements already restored by delete set command from the
abort path in case there is a previous delete element command in
the batch. Check for the next generation bit just like it is done
via set iteration to restore maps.
netfilter pull request 24-04-18
* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
====================
Link: https://lore.kernel.org/r/20240418010948.3332346-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
even the ARP table is full
Inter-process communication on localhost should be established successfully
even the ARP table is full, many processes on server machine use the
localhost to communicate such as command-line interface (CLI),
servers hope all CLI commands can be executed successfully even the arp
table is full. Right now CLI commands got timeout when the arp table is
full. Set the parameter of exempt_from_gc to be true for LOOPBACK net
device to keep localhost neigh in arp table, not removed by gc.
the steps of reproduced:
server with "gc_thresh3 = 1024" setting, ping server from more than 1024
same netmask Lan IPv4 addresses, run "ssh localhost" on console interface,
then the command will get timeout.
Signed-off-by: Zheng Li <James.Z.Li@Dell.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416095343.540-1-lizheng043@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The UDP_ENCAP_ESPINUDP_NON_IKE mode, introduced into the Linux kernel
in 2004 [2], has remained inactive and obsolete for an extended period.
This mode was originally defined in an early version of an IETF draft
[1] from 2001. By the time it was integrated into the kernel in 2004 [2],
it had already been replaced by UDP_ENCAP_ESPINUDP [3] in later
versions of draft-ietf-ipsec-udp-encaps, particularly in version 06.
Over time, UDP_ENCAP_ESPINUDP_NON_IKE has lost its relevance, with no
known use cases.
With this commit, we remove support for UDP_ENCAP_ESPINUDP_NON_IKE,
simplifying the codebase and eliminating unnecessary complexity.
Kernel will return an error -ENOPROTOOPT if the userspace tries to set
this option.
References:
[1] https://datatracker.ietf.org/doc/html/draft-ietf-ipsec-udp-encaps-00.txt
[2] Commit that added UDP_ENCAP_ESPINUDP_NON_IKE to the Linux historic
repository.
Author: Andreas Gruenbacher <agruen@suse.de>
Date: Fri Apr 9 01:47:47 2004 -0700
[IPSEC]: Support draft-ietf-ipsec-udp-encaps-00/01, some ipec impls need it.
[3] Commit that added UDP_ENCAP_ESPINUDP to the Linux historic
repository.
Author: Derek Atkins <derek@ihtfp.com>
Date: Wed Apr 2 13:21:02 2003 -0800
[IPSEC]: Implement UDP Encapsulation framework.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
