summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2015-02-01bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellinkRoopa Prabhu
bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01ipv4: tcp: get rid of ugly unicast_sockEric Dumazet
In commit be9f4a44e7d41 ("ipv4: tcp: remove per net tcp_sock") I tried to address contention on a socket lock, but the solution I chose was horrible : commit 3a7c384ffd57e ("ipv4: tcp: unicast_sock should not land outside of TCP stack") addressed a selinux regression. commit 0980e56e506b ("ipv4: tcp: set unicast_sock uc_ttl to -1") took care of another regression. commit b5ec8eeac46 ("ipv4: fix ip_send_skb()") fixed another regression. commit 811230cd85 ("tcp: ipv4: initialize unicast_sock sk_pacing_rate") was another shot in the dark. Really, just use a proper socket per cpu, and remove the skb_orphan() call, to re-enable flow control. This solves a serious problem with FQ packet scheduler when used in hostile environments, as we do not want to allocate a flow structure for every RST packet sent in response to a spoofed packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-01Bluetooth: Fix OOB data present for BR/EDR Secure Connections Only modeMarcel Holtmann
When using Secure Connections Only mode, then only P-256 OOB data is valid and should be provided. In case userspace provides P-192 and P-256 OOB data, then the P-192 values will be set to zero. However the present value of the IO capability exchange still mentioned that both values would be available. Fix this by telling the controller clearly that only the P-256 OOB data is present. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-01Bluetooth: Expose remote OOB information as debugfs entryMarcel Holtmann
For debugging purposes it is good to know which OOB data is actually currently loaded for each controller. So expose that list via debugfs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-01Bluetooth: Expose hardware error code as debugfs entryMarcel Holtmann
When the Hardware Error event is send by the controller, the Bluetooth core stores the error code. Expose it via debugfs so it can be retrieved later on. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-01Bluetooth: Expose debug keys usage setting via debugfsMarcel Holtmann
To allow easier debugging when debug keys are generated, provide debugfs entry for checking the setting of debug keys usage. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-01Bluetooth: Track changes from HCI Write Simple Pairing Debug Mode commandMarcel Holtmann
When the HCI Write Simple Pairing Debug Mode command has been issued, the result needs to be tracked and stored. The hdev->ssp_debug_mode variable is already present, but was never updated when the mode in the controller was actually changed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-01Bluetooth: Expose Secure Simple Pairing debug mode setting in debugfsMarcel Holtmann
The value of the ssp_debug_mode should be accessible via debugfs to be able to determine if a BR/EDR controller generates debugs keys or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-31ipv4: icmp: use percpu allocationEric Dumazet
Get rid of nr_cpu_ids and use modern percpu allocation. Note that the sockets themselves are not yet allocated using NUMA affinity. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31tcp: use SACK RTTs for CCKenneth Klette Jonassen
Current behavior only passes RTTs from sequentially acked data to CC. If sender gets a combined ACK for segment 1 and SACK for segment 3, then the computed RTT for CC is the time between sending segment 1 and receiving SACK for segment 3. Pass the minimum computed RTT from any acked data to CC, i.e. time between sending segment 3 and receiving SACK for segment 3. Signed-off-by: Kenneth Klette Jonassen <kennetkl@ifi.uio.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31Bluetooth: Allow remote OOB data to only provide P-192 or P-256 valuesMarcel Holtmann
In case the remote only provided P-192 or P-256 data for OOB pairing, then make sure that the data value pointers are correctly set. That way the core can provide correct information when remote OOB data present information have to be communicated. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-31Bluetooth: Fix OOB data present value for SMP pairingMarcel Holtmann
Before setting the OOB data present flag with SMP pairing, check the newly introduced present tracking that actual OOB data values have been provided. The existence of remote OOB data structure does not actually mean that the correct data values are available. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-31Bluetooth: Fix OOB data present value for BR/EDR Secure ConnectionsMarcel Holtmann
When BR/EDR Secure Connections has been enabled, the OOB data present value can take 2 additional values. The host has to clearly provide details about if P-192 OOB data, P-256 OOB data or a combination of P-192 and P-256 OOB data is present. In case BR/EDR Secure Connections is not enabled or not supported, then check that P-192 OOB data is actually present and return the correct value based on that. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-31Bluetooth: Store OOB data present value for each set of remote OOB dataMarcel Holtmann
Instead of doing complex calculation every time the OOB data is used, just calculate the OOB data present value and store it with the OOB data raw values. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-30irda: use msecs_to_jiffies for conversionsNicholas Mc Guire
This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 constructs by msecs_to_jiffies(var). Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30net: Fix vlan_get_protocol for stacked vlanToshiaki Makita
vlan_get_protocol() could not get network protocol if a skb has a 802.1ad vlan tag or multiple vlans, which caused incorrect checksum calculation in several drivers. Fix vlan_get_protocol() to retrieve network protocol instead of incorrect vlan protocol. As the logic is the same as skb_network_protocol(), create a common helper function __vlan_get_protocol() and call it from existing functions. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30net: mark some potential candidates __read_mostlyDaniel Borkmann
They are all either written once or extremly rarely (e.g. from init code), so we can move them to the .data..read_mostly section. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30net: sctp: fix passing wrong parameter header to param_type2af in ↵Saran Maruti Ramanara
sctp_process_param When making use of RFC5061, section 4.2.4. for setting the primary IP address, we're passing a wrong parameter header to param_type2af(), resulting always in NULL being returned. At this point, param.p points to a sctp_addip_param struct, containing a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation id. Followed by that, as also presented in RFC5061 section 4.2.4., comes the actual sctp_addr_param, which also contains a sctp_paramhdr, but this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that param_type2af() can make use of. Since we already hold a pointer to addr_param from previous line, just reuse it for param_type2af(). Fixes: d6de3097592b ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by: Saran Maruti Ramanara <saran.neti@telus.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30netlink: fix wrong subscription bitmask to group mapping inPablo Neira
The subscription bitmask passed via struct sockaddr_nl is converted to the group number when calling the netlink_bind() and netlink_unbind() callbacks. The conversion is however incorrect since bitmask (1 << 0) needs to be mapped to group number 1. Note that you cannot specify the group number 0 (usually known as _NONE) from setsockopt() using NETLINK_ADD_MEMBERSHIP since this is rejected through -EINVAL. This problem became noticeable since 97840cb ("netfilter: nfnetlink: fix insufficient validation in nfnetlink_bind") when binding to bitmask (1 << 0) in ctnetlink. Reported-by: Andre Tomt <andre@tomt.net> Reported-by: Ivan Delalande <colona@arista.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30netfilter: nft_lookup: add missing attribute validation for NFTA_LOOKUP_SET_IDPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-01-30netfilter: nft_compat: add ebtables supportArturo Borrero
This patch extends nft_compat to support ebtables extensions. ebtables verdict codes are translated to the ones used by the nf_tables engine, so we can properly use ebtables target extensions from nft_compat. This patch extends previous work by Giuseppe Longo <giuseppelng@gmail.com>. Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-01-30netfilter: nf_tables: fix leaks in error path of nf_tables_newchain()Pablo Neira Ayuso
Release statistics and module refcount on memory allocation problems. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-01-30xprtrdma: Update the GFP flags used in xprt_rdma_allocate()Chuck Lever
Reflect the more conservative approach used in the socket transport's version of this transport method. An RPC buffer allocation should avoid forcing not just FS activity, but any I/O. In particular, two recent changes missed updating xprtrdma: - Commit c6c8fe79a83e ("net, sunrpc: suppress allocation warning ...") - Commit a564b8f03986 ("nfs: enable swap on NFS") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Clean up after adding regbuf managementChuck Lever
rpcrdma_{de}register_internal() are used only in verbs.c now. MAX_RPCRDMAHDR is no longer used and can be removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Allocate zero pad separately from rpcrdma_bufferChuck Lever
Use the new rpcrdma_alloc_regbuf() API to shrink the amount of contiguous memory needed for a buffer pool by moving the zero pad buffer into a regbuf. This is for consistency with the other uses of internally registered memory. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Allocate RPC/RDMA receive buffer separately from struct rpcrdma_repChuck Lever
The rr_base field is currently the buffer where RPC replies land. An RPC/RDMA reply header lands in this buffer. In some cases an RPC reply header also lands in this buffer, just after the RPC/RDMA header. The inline threshold is an agreed-on size limit for RDMA SEND operations that pass from server and client. The sum of the RPC/RDMA reply header size and the RPC reply header size must be less than this threshold. The largest RDMA RECV that the client should have to handle is the size of the inline threshold. The receive buffer should thus be the size of the inline threshold, and not related to RPCRDMA_MAX_SEGS. RPC replies received via RDMA WRITE (long replies) are caught in rq_rcv_buf, which is the second half of the RPC send buffer. Ie, such replies are not involved in any way with rr_base. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Allocate RPC/RDMA send buffer separately from struct rpcrdma_reqChuck Lever
The rl_base field is currently the buffer where each RPC/RDMA call header is built. The inline threshold is an agreed-on size limit to for RDMA SEND operations that pass between client and server. The sum of the RPC/RDMA header size and the RPC header size must be less than or equal to this threshold. Increasing the r/wsize maximum will require MAX_SEGS to grow significantly, but the inline threshold size won't change (both sides agree on it). The server's inline threshold doesn't change. Since an RPC/RDMA header can never be larger than the inline threshold, make all RPC/RDMA header buffers the size of the inline threshold. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Allocate RPC send buffer separately from struct rpcrdma_reqChuck Lever
Because internal memory registration is an expensive and synchronous operation, xprtrdma pre-registers send and receive buffers at mount time, and then re-uses them for each RPC. A "hardway" allocation is a memory allocation and registration that replaces a send buffer during the processing of an RPC. Hardway must be done if the RPC send buffer is too small to accommodate an RPC's call and reply headers. For xprtrdma, each RPC send buffer is currently part of struct rpcrdma_req so that xprt_rdma_free(), which is passed nothing but the address of an RPC send buffer, can find its matching struct rpcrdma_req and rpcrdma_rep quickly via container_of / offsetof. That means that hardway currently has to replace a whole rpcrmda_req when it replaces an RPC send buffer. This is often a fairly hefty chunk of contiguous memory due to the size of the rl_segments array and the fact that both the send and receive buffers are part of struct rpcrdma_req. Some obscure re-use of fields in rpcrdma_req is done so that xprt_rdma_free() can detect replaced rpcrdma_req structs, and restore the original. This commit breaks apart the RPC send buffer and struct rpcrdma_req so that increasing the size of the rl_segments array does not change the alignment of each RPC send buffer. (Increasing rl_segments is needed to bump up the maximum r/wsize for NFS/RDMA). This change opens up some interesting possibilities for improving the design of xprt_rdma_allocate(). xprt_rdma_allocate() is now the one place where RPC send buffers are allocated or re-allocated, and they are now always left in place by xprt_rdma_free(). A large re-allocation that includes both the rl_segments array and the RPC send buffer is no longer needed. Send buffer re-allocation becomes quite rare. Good send buffer alignment is guaranteed no matter what the size of the rl_segments array is. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Add struct rpcrdma_regbuf and helpersChuck Lever
There are several spots that allocate a buffer via kmalloc (usually contiguously with another data structure) and then register that buffer internally. I'd like to split the buffers out of these data structures to allow the data structures to scale. Start by adding functions that can kmalloc and register a buffer, and can manage/preserve the buffer's associated ib_sge and ib_mr fields. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Refactor rpcrdma_buffer_create() and rpcrdma_buffer_destroy()Chuck Lever
Move the details of how to create and destroy rpcrdma_req and rpcrdma_rep structures into helper functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Simplify synopsis of rpcrdma_buffer_create()Chuck Lever
Clean up: There is one call site for rpcrdma_buffer_create(). All of the arguments there are fields of an rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Take struct ib_qp_attr and ib_qp_init_attr off the stackChuck Lever
Reduce stack footprint of the connection upcall handler function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Take struct ib_device_attr off the stackChuck Lever
Device attributes are large, and are used in more than one place. Stash a copy in dynamically allocated memory. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Free the pd if ib_query_qp() failsChuck Lever
If ib_query_qp() fails or the memory registration mode isn't supported, don't leak the PD. An orphaned IB/core resource will cause IB module removal to hang. Fixes: bd7ed1d13304 ("RPC/RDMA: check selected memory registration ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rpcrdma_ep::rep_func and ::rep_xprtChuck Lever
Clean up: The rep_func field always refers to rpcrdma_conn_func(). rep_func should have been removed by commit b45ccfd25d50 ("xprtrdma: Remove MEMWINDOWS registration modes"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Move credit update to RPC reply handlerChuck Lever
Reduce work in the receive CQ handler, which can be run at hardware interrupt level, by moving the RPC/RDMA credit update logic to the RPC reply handler. This has some additional benefits: More header sanity checking is done before trusting the incoming credit value, and the receive CQ handler no longer touches the RPC/RDMA header (the CPU stalls while waiting for the header contents to be brought into the cache). This further extends work begun by commit e7ce710a8802 ("xprtrdma: Avoid deadlock when credit window is reset"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rl_mr field, and the mr_chunk unionChuck Lever
Clean up: Since commit 0ac531c18323 ("xprtrdma: Remove REGISTER memory registration mode"), the rl_mr pointer is no longer used anywhere. After removal, there's only a single member of the mr_chunk union, so mr_chunk can be removed as well, in favor of a single pointer field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rpcrdma_ep::rep_iaChuck Lever
Clean up: This field is not used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Rename "xprt" and "rdma_connect" fields in struct rpcrdma_xprtChuck Lever
Clean up: Use consistent field names in struct rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Clean up hdrlenChuck Lever
Clean up: Replace naked integers with a documenting macro. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Display XIDs in host byte orderChuck Lever
xprtsock.c and the backchannel code display XIDs in host byte order. Follow suit in xprtrdma. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Modernize htonl and ntohlChuck Lever
Clean up: Replace htonl and ntohl with the be32 equivalents. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: human-readable completion statusChuck Lever
Make it easier to grep the system log for specific error conditions. The wc.opcode field is not included because opcode numbers are sparse, and because wc.opcode is not necessarily valid when completion reports an error. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30ipvs: rerouting to local clients is not needed anymoreJulian Anastasov
commit f5a41847acc5 ("ipvs: move ip_route_me_harder for ICMP") from 2.6.37 introduced ip_route_me_harder() call for responses to local clients, so that we can provide valid rt_src after SNAT. It was used by TCP to provide valid daddr for ip_send_reply(). After commit 0a5ebb8000c5 ("ipv4: Pass explicit daddr arg to ip_send_reply()." from 3.0 this rerouting is not needed anymore and should be avoided, especially in LOCAL_IN. Fixes 3.12.33 crash in xfrm reported by Florian Wiessner: "3.12.33 - BUG xfrm_selector_match+0x25/0x2f6" Reported-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Tested-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2015-01-29ipv4: Don't increase PMTU with Datagram Too Big message.Li Wei
RFC 1191 said, "a host MUST not increase its estimate of the Path MTU in response to the contents of a Datagram Too Big message." Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29dev: add per net_device packet type chainsSalam Noureddine
When many pf_packet listeners are created on a lot of interfaces the current implementation using global packet type lists scales poorly. This patch adds per net_device packet type lists to fix this problem. The patch was originally written by Eric Biederman for linux-2.6.29. Tested on linux-3.16. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29rtnetlink: pass link_net to the newlink handlerNicolas Dichtel
When IFLA_LINK_NETNSID is used, the netdevice should be built in this link netns and moved at the end to another netns (pointed by the socket netns or IFLA_NET_NS_[PID|FD]). Existing user of the newlink handler will use the netns argument (src_net) to find a link netdevice or to check some other information into the link netns. For example, to find a netdevice, two information are required: an ifindex (usually from IFLA_LINK) and a netns (this link netns). Note: when using IFLA_LINK_NETNSID and IFLA_NET_NS_[PID|FD], a user may create a netdevice that stands in netnsX and with its link part in netnsY, by sending a rtnl message from netnsZ. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29caif: remove wrong dev_net_set() callNicolas Dichtel
src_net points to the netns where the netlink message has been received. This netns may be different from the netns where the interface is created (because the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns. It seems wrong to override the netns in the newlink() handler because if it was not already src_net, it means that the user explicitly asks to create the netdevice in another netns. CC: Sjur Brændeland <sjur.brandeland@stericsson.com> CC: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Fixes: c41254006377 ("caif-hsi: Add rtnl support") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Bluetooth: Fix sending Read Remote Extended Features commandSzymon Janc
This command should only be used if remote device reports that it supports extended features. Otherwise command will fail and connection will be dropped. Some devices support SSP but don't support extended features so current check for SSP support is not enought. Instead of checking for SSP support just check if both ends support Extended Feature. < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Packet type: 0xcc18 DM1 may be used DH1 may be used DM3 may be used DH3 may be used DM5 may be used DH5 may be used Page scan repetition mode: R1 (0x01) Page scan mode: Mandatory (0x00) Clock offset: 0x94c8 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 5 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) ncmd 1 Status: Success (0x00) > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Page scan repetition mode: R1 (0x01) > HCI Event: Read Remote Supported Features (0x0b) plen 11 Status: Success (0x00) Handle: 5 Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x07 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 Handle: 5 Page: 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: Read Clock Offset (0x01|0x001f) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Clock Offset (0x01|0x001f) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 5 Reason: Remote User Terminated Connection (0x13) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28tcp: ipv4: initialize unicast_sock sk_pacing_rateEric Dumazet
When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing") Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 00:02:31 +0000