| Age | Commit message (Collapse) | Author |
|---|
|
Now that each ->accept method has been converted to use xdr_stream,
the svcxdr_init_decode() calls can be hoisted back up into the
generic RPC server code.
The dprintk in svc_authenticate() is removed, since
trace_svc_authenticate() reports the same information.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Micro-optimizations:
1. The value of rqstp->rq_auth_stat is replaced no matter which
arm of the switch is taken, so the initial assignment can be
safely removed.
2. Avoid checking the value of gc->gc_proc twice in the I/O
(RPC_GSS_PROC_DATA) path.
The cost is a little extra code redundancy.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: To help orient readers, name the stack variables to match
the XDR field names.
For readability, I'm also going to rename the unwrap and wrap
functions in a consistent manner, starting with unwrap_integ_data().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up / code de-duplication - this functionality is already
available in the generic XDR layer.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The entire RPC_GSS_PROC_INIT path is converted over to xdr_stream
for decoding the Call credential and verifier.
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_verf() is already short. Fold it into its only caller.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
gss_read_common_verf() is now just a wrapper for dup_netobj(), thus
it can be replaced with direct calls to dup_netobj().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pre-requisite to replacing gss_read_common_verf().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since upcalls are infrequent, ensure the compiler places the upcall
mechanism out-of-line from the I/O path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Since the server-side of the Linux kernel SunRPC implementation
ignores the contents of the Call's machinename field, there's no
need for its RPC_AUTH_UNIX authenticator to reject names that are
larger than UNX_MAXNODENAME.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Done as part of hardening the server-side RPC header decoding path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
RFC 5531 defines the body of an RPC Call message like this:
struct call_body {
unsigned int rpcvers;
unsigned int prog;
unsigned int vers;
unsigned int proc;
opaque_auth cred;
opaque_auth verf;
/* procedure-specific parameters start here */
};
In the current server code, decoding a struct opaque_auth type is
open-coded in several places, and is thus difficult to harden
everywhere.
Introduce a helper for decoding an opaque_auth within the context
of a xdr_stream. This helper can be shared with all authentication
flavor implemenations, even on the client-side.
Done as part of hardening the server-side RPC header decoding paths.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: So that the overhaul of each ->accept method can be done
in separate smaller patches, temporarily move the
svcxdr_init_decode() call into those methods.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that all vs_dispatch functions invoke svcxdr_init_decode(), it
is common code and can be pushed down into the generic RPC server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This is a followup of commit 2558b8039d05 ("net: use a bounce
buffer for copying skb->mark")
x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]
Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.
[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The recent merge from net left-over some unused code in
leftover.c - nomen omen.
Just drop the unused bits.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
That really was meant to be a per netns attribute from the beginning.
The idea is that once proper isolation is in place in the main
namespace, additional demux in the child namespaces will be redundant.
Let's make child netns default rps mask empty by default.
To avoid bloating the netns with a possibly large cpumask, allocate
it on-demand during the first write operation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add safeguard to check for NULL tupe in objects updates via
NFT_MSG_NEWOBJ, this should not ever happen. From Alok Tiwari.
2) Incorrect pointer check in the new destroy rule command,
from Yang Yingliang.
3) Incorrect status bitcheck in nf_conntrack_udp_packet(),
from Florian Westphal.
4) Simplify seq_print_acct(), from Ilia Gavrilov.
5) Use 2-arg optimal variant of kfree_rcu() in IPVS,
from Julian Anastasov.
6) TCP connection enters CLOSE state in conntrack for locally
originated TCP reset packet from the reject target,
from Florian Westphal.
The fixes #2 and #3 in this series address issues from the previous pull
nf-next request in this net-next cycle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a file descriptor of pppol2tp socket is passed as file descriptor
of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register().
This situation is reproduced by the following program:
int main(void)
{
int sock;
struct sockaddr_pppol2tp addr;
sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
if (sock < 0) {
perror("socket");
return 1;
}
addr.sa_family = AF_PPPOX;
addr.sa_protocol = PX_PROTO_OL2TP;
addr.pppol2tp.pid = 0;
addr.pppol2tp.fd = sock;
addr.pppol2tp.addr.sin_family = PF_INET;
addr.pppol2tp.addr.sin_port = htons(0);
addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1");
addr.pppol2tp.s_tunnel = 1;
addr.pppol2tp.s_session = 0;
addr.pppol2tp.d_tunnel = 0;
addr.pppol2tp.d_session = 0;
if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("connect");
return 1;
}
return 0;
}
This program causes the following lockdep warning:
============================================
WARNING: possible recursive locking detected
6.2.0-rc5-00205-gc96618275234 #56 Not tainted
--------------------------------------------
repro/8607 is trying to acquire lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0
but task is already holding lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sk_lock-AF_PPPOX);
lock(sk_lock-AF_PPPOX);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by repro/8607:
#0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
stack backtrace:
CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x178
__lock_acquire.cold+0x119/0x3b9
? lockdep_hardirqs_on_prepare+0x410/0x410
lock_acquire+0x1e0/0x610
? l2tp_tunnel_register+0x2b7/0x11c0
? lock_downgrade+0x710/0x710
? __fget_files+0x283/0x3e0
lock_sock_nested+0x3a/0xf0
? l2tp_tunnel_register+0x2b7/0x11c0
l2tp_tunnel_register+0x2b7/0x11c0
? sprintf+0xc4/0x100
? l2tp_tunnel_del_work+0x6b0/0x6b0
? debug_object_deactivate+0x320/0x320
? lockdep_init_map_type+0x16d/0x7a0
? lockdep_init_map_type+0x16d/0x7a0
? l2tp_tunnel_create+0x2bf/0x4b0
? l2tp_tunnel_create+0x3c6/0x4b0
pppol2tp_connect+0x14e1/0x1a30
? pppol2tp_put_sk+0xd0/0xd0
? aa_sk_perm+0x2b7/0xa80
? aa_af_perm+0x260/0x260
? bpf_lsm_socket_connect+0x9/0x10
? pppol2tp_put_sk+0xd0/0xd0
__sys_connect_file+0x14f/0x190
__sys_connect+0x133/0x160
? __sys_connect_file+0x190/0x190
? lockdep_hardirqs_on+0x7d/0x100
? ktime_get_coarse_real_ts64+0x1b7/0x200
? ktime_get_coarse_real_ts64+0x147/0x200
? __audit_syscall_entry+0x396/0x500
__x64_sys_connect+0x72/0xb0
do_syscall_64+0x38/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes the issue by getting/creating the tunnel before
locking the pppol2tp socket.
Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()")
Cc: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change icmpv6_echo_reply() to return a drop reason.
For the moment, return NOT_SPECIFIED or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hosts can often receive neighbour discovery messages
that are not for them.
Use a dedicated drop reason to make clear the packet is dropped
for this normal case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a generic drop reason for any error detected
in ndisc_parse_options().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ndisc_redirect_rcv() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and values from icmpv6_notify().
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ndisc_router_discovery() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and SKB_CONSUMED.
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ndisc_recv_rs() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ndisc_recv_na() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change ndisc_recv_ns() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
kfree_skb() includes the location, it makes sense
to add it to consume_skb() as well.
After patch:
taskd_EventMana 8602 [004] 420.406239: skb:consume_skb: skbaddr=0xffff893a4a6d0500 location=unix_stream_read_generic
swapper 0 [011] 422.732607: skb:consume_skb: skbaddr=0xffff89597f68cee0 location=mlx4_en_free_tx_desc
discipline 9141 [043] 423.065653: skb:consume_skb: skbaddr=0xffff893a487e9c00 location=skb_consume_udp
swapper 0 [010] 423.073166: skb:consume_skb: skbaddr=0xffff8949ce9cdb00 location=icmpv6_rcv
borglet 8672 [014] 425.628256: skb:consume_skb: skbaddr=0xffff8949c42e9400 location=netlink_dump
swapper 0 [028] 426.263317: skb:consume_skb: skbaddr=0xffff893b1589dce0 location=net_rx_action
wget 14339 [009] 426.686380: skb:consume_skb: skbaddr=0xffff893a51b552e0 location=tcp_rcv_state_process
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we try to start AF_XDP on some machines with long running time, due
to the machine's memory fragmentation problem, there is no sufficient
contiguous physical memory that will cause the start failure.
If the size of the queue is 8 * 1024, then the size of the desc[] is
8 * 1024 * 8 = 16 * PAGE, but we also add struct xdp_ring size, so it is
16page+. This is necessary to apply for a 4-order memory. If there are a
lot of queues, it is difficult to these machine with long running time.
Here, that we actually waste 15 pages. 4-Order memory is 32 pages, but
we only use 17 pages.
This patch replaces __get_free_pages() by vmalloc() to allocate memory
to solve these problems.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a certain probability that following
exceptions will occur in the wrk benchmark test:
Running 10s test @ http://11.213.45.6:80
8 threads and 64 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 3.72ms 13.94ms 245.33ms 94.17%
Req/Sec 1.96k 713.67 5.41k 75.16%
155262 requests in 10.10s, 23.10MB read
Non-2xx or 3xx responses: 3
We will find that the error is HTTP 400 error, which is a serious
exception in our test, which means the application data was
corrupted.
Consider the following scenarios:
CPU0 CPU1
buf_desc->used = 0;
cmpxchg(buf_desc->used, 0, 1)
deal_with(buf_desc)
memset(buf_desc->cpu_addr,0);
This will cause the data received by a victim connection to be cleared,
thus triggering an HTTP 400 error in the server.
This patch exchange the order between clear used and memset, add
barrier to ensure memory consistency.
Fixes: 1c5526968e27 ("net/smc: Clear memory when release and reuse buffer")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a certain chance to trigger the following panic:
PID: 5900 TASK: ffff88c1c8af4100 CPU: 1 COMMAND: "kworker/1:48"
#0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7
#1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a
#2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60
#3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7
#4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715
#5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654
#6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62
[exception RIP: ib_alloc_mr+19]
RIP: ffffffffc0c9cce3 RSP: ffff9456c1cc7c38 RFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000004
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88c1ea281d00 R8: 000000020a34ffff R9: ffff88c1350bbb20
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000010 R14: ffff88c1ab040a50 R15: ffff88c1ea281d00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc]
#8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc]
#9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc]
The reason here is that when the server tries to create a second link,
smc_llc_srv_add_link() has no protection and may add a new link to
link group. This breaks the security environment protected by
llc_conf_mutex.
Fixes: 2d2209f20189 ("net/smc: first part of add link processing as SMC server")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It makes no sense to keep randomly large max_sdu values, especially if
larger than the device's max_mtu. These are visible in "tc qdisc show".
Such a max_sdu is practically unlimited and will cause no packets for
that traffic class to be dropped on enqueue.
Just set max_sdu_dynamic to U32_MAX, which in the logic below causes
taprio to save a max_frm_len of U32_MAX and a max_sdu presented to user
space of 0 (unlimited).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
adjustment
The overhead specified in the size table comes from the user. With small
time intervals (or gates always closed), the overhead can be larger than
the max interval for that traffic class, and their difference is
negative.
What we want to happen is for max_sdu_dynamic to have the smallest
non-zero value possible (1) which means that all packets on that traffic
class are dropped on enqueue. However, since max_sdu_dynamic is u32, a
negative is represented as a large value and oversized dropping never
happens.
Use max_t with int to force a truncation of max_frm_len to no smaller
than dev->hard_header_len + 1, which in turn makes max_sdu_dynamic no
smaller than 1.
Fixes: fed87cc6718a ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
taprio_calculate_gate_durations() depends on netdev_get_num_tc() and
this returns 0. So it calculates the maximum gate durations for no
traffic class.
I had tested the blamed commit only with another patch in my tree, one
which in the end I decided isn't valuable enough to submit ("net/sched:
taprio: mask off bits in gate mask that exceed number of TCs").
The problem is that having this patch threw off my testing. By moving
the netdev_set_num_tc() call earlier, we implicitly gave to
taprio_calculate_gate_durations() the information it needed.
Extract only the portion from the unsubmitted change which applies the
mqprio configuration to the netdev earlier.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-15-vladimir.oltean@nxp.com/
Fixes: a306a90c8ffe ("net/sched: taprio: calculate tc gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix three cases of overproduction of wakeups:
(1) rxrpc_input_split_jumbo() conditionally notifies the app that there's
data for recvmsg() to collect if it queues some data - and then its
only caller, rxrpc_input_data(), goes and wakes up recvmsg() anyway.
Fix the rxrpc_input_data() to only do the wakeup in failure cases.
(2) If a DATA packet is received for a call by the I/O thread whilst
recvmsg() is busy draining the call's rx queue in the app thread, the
call will left on the recvmsg() queue for recvmsg() to pick up, even
though there isn't any data on it.
This can cause an unexpected recvmsg() with a 0 return and no MSG_EOR
set after the reply has been posted to a service call.
Fix this by discarding pending calls from the recvmsg() queue that
don't need servicing yet.
(3) Not-yet-completed calls get requeued after having data read from them,
even if they have no data to read.
Fix this by only requeuing them if they have data waiting on them; if
they don't, the I/O thread will requeue them when data arrives or they
fail.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/3386149.1676497685@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to prevent a device from disappearing when a background job was
started, dev_hold() and dev_put() calls were made. During the
stabilization phase of the scan/beacon features, it was later decided
that removing the device while a background job was ongoing was a valid use
case, and we should instead stop the background job and then remove the
device, rather than prevent the device from being removed. This is what
is currently done, which means manually reference counting the device
during background jobs is no longer needed.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Fixes: 9bc114504b07 ("ieee802154: Add support for user beaconing requests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
At this stage we simply do not care about the delayed work value,
because active scan is not yet supported, so we can blindly queue
another work once a beacon has been sent.
It fixes a smatch warning:
mac802154_beacon_worker() warn: always true condition
'(local->beacon_interval >= 0) => (0-u32max >= 0)'
Fixes: 3accf4762734 ("mac802154: Handle basic beaconing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Using ieee802154_subif_start_xmit() to bypass the net queue when
sending beacons is broken because it does not acquire the
HARD_TX_LOCK(), hence not preventing datagram buffers to be smashed by
beacons upon contention situation. Using the mlme_tx helper is not the
best fit either but at least it is not buggy and has little-to-no
performance hit. More details are given in the comment explaining this
choice in the code.
Fixes: 3accf4762734 ("mac802154: Handle basic beaconing")
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Returning EPERM gives the impression that "right now" it is not
possible, but "later" it could be, while what we want to express is the
fact that this is not currently supported at all (might change in the
future). So let's return EOPNOTSUPP instead.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Suggested-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Instead of printing error messages in the kernel log, let's use extack.
When there is a netlink error returned that could be further specified
with a string, use extack as well.
Apply this logic to the very recent scan/beacon infrastructure.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Fixes: 9bc114504b07 ("ieee802154: Add support for user beaconing requests")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Instead of open-coding scan parameters (page, channels, duration, etc),
let's use the existing NLA_POLICY* macros. This help greatly reducing
the error handling and clarifying the overall logic.
Fixes: ed3557c947e1 ("ieee802154: Add support for user scanning requests")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
|
|
This reverts commit 6c20822fada1b8adb77fa450d03a0d449686a4a9.
build bot failed on arch with different cache line size:
https://lore.kernel.org/bpf/50c35055-afa9-d01e-9a05-ea5351280e4f@intel.com/
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The bpf_fib_lookup() helper does not only look up the fib (ie. route)
but it also looks up the neigh. Before returning the neigh, the helper
does not check for NUD_VALID. When a neigh state (neigh->nud_state)
is in NUD_FAILED, its dmac (neigh->ha) could be all zeros. The helper
still returns SUCCESS instead of NO_NEIGH in this case. Because of the
SUCCESS return value, the bpf prog directly uses the returned dmac
and ends up filling all zero in the eth header.
This patch checks for NUD_VALID and returns NO_NEIGH if the neigh is
not valid.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217004150.2980689-3-martin.lau@linux.dev
|
