summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2014-11-07udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicastsRick Jones
As NIC multicast filtering isn't perfect, and some platforms are quite content to spew broadcasts, we should not trigger an event for skb:kfree_skb when we do not have a match for such an incoming datagram. We do though want to avoid sweeping the matter under the rug entirely, so increment a suitable statistic. This incorporates feedback from David L. Stevens, Karl Neiss and Eric Dumazet. V3 - use bool per David Miller Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07net: Kill skb_copy_datagram_const_iovecHerbert Xu
Now that both macvtap and tun are using skb_copy_datagram_iter, we can kill the abomination that is skb_copy_datagram_const_iovec. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07inet: Add skb_copy_datagram_iterHerbert Xu
This patch adds skb_copy_datagram_iter, which is identical to skb_copy_datagram_iovec except that it operates on iov_iter instead of iovec. Eventually all users of skb_copy_datagram_iovec should switch over to iov_iter and then we can remove skb_copy_datagram_iovec. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-07Bluetooth: Send mgmt_connected only if state is BT_CONFIGJaganath Kanakkassery
If a remote name request is initiated while acl connection is going on, and if it fails then mgmt_connected will be sent. Evetually after acl connection, authentication will not be initiated and userspace will never get pairing reply. < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr AA:BB:CC:DD:EE:FF ptype 0xcc18 rswitch 0x01 clkoffset 0x2306 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Inquiry Complete (0x01) plen 1 status 0x00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr AA:BB:CC:DD:EE:FF mode 1 clkoffset 0x2306 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x0c ncmd 1 Error: Command Disallowed > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 50 bdaddr 00:0D:FD:47:53:B2 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 50 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 50 slots 5 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 50 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 50 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 50 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 This patch sends mgmt_connected in remote name command status only if conn->state is BT_CONFIG Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-11-06Merge tag 'master-2014-11-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-06 Please pull this batch of fixes intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This contains another small set of fixes for 3.18, these are all over the place and most of the bugs are old, one even dates back to the original mac80211 we merged into the kernel." For the iwlwifi bits, Emmanuel says: "I fix here two issues that are related to the firmware loading flow. A user reported that he couldn't load the driver because the rfkill line was pulled up while we were running the calibrations. This was happening while booting the system: systemd was restoring the "disable wifi settings" and that raised an RFKILL interrupt during the calibration. Our driver didn't handle that properly and this is now fixed." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-11-06Merge branch 'net_next_ovs' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/pshelar/openvswitch Pravin B Shelar says: ==================== Open vSwitch First two patches are related to OVS MPLS support. Rest of patches are mostly refactoring and minor improvements to openvswitch. v1-v2: - Fix conflicts due to "gue: Remote checksum offload" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-066lowpan: move skb_free from error paths in decompressionMartin Townsend
Currently we ensure that the skb is freed on every error path in IPHC decompression which makes it easy to introduce skb leaks. By centralising the skb_free into the receive function it makes future decompression routines easier to maintain. It does come at the expense of ensuring that the skb passed into the decompression routine must not be copied. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-06net: esp: Convert NETDEBUG to pr_infoJoe Perches
Commit 64ce207306de ("[NET]: Make NETDEBUG pure printk wrappers") originally had these NETDEBUG printks as always emitting. Commit a2a316fd068c ("[NET]: Replace CONFIG_NET_DEBUG with sysctl") added a net_msg_warn sysctl to these NETDEBUG uses. Convert these NETDEBUG uses to normal pr_info calls. This changes the output prefix from "ESP: " to include "IPSec: " for the ipv4 case and "IPv6: " for the ipv6 case. These output lines are now like the other messages in the files. Other miscellanea: Neaten the arithmetic spacing to be consistent with other arithmetic spacing in the files. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net; ipv[46] - Remove 2 unnecessary NETDEBUG OOM messagesJoe Perches
These messages aren't useful as there's a generic dump_stack() on OOM. Neaten the comment and if test above the OOM by separating the assign in if into an allocation then if test. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06net: dsa: slave: Fix autoneg for phys on switch MDIO busAndrew Lunn
When the ports phys are connected to the switches internal MDIO bus, we need to connect the phy to the slave netdev, otherwise auto-negotiation etc, does not work. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06sched: fix act file names in header commentJiri Pirko
Fixes: 4bba3925 ("[PKT_SCHED]: Prefix tc actions with act_") Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06ip6_tunnel: Add support for wildcard tunnel endpoints.Steffen Klassert
This patch adds support for tunnels with local or remote wildcard endpoints. With this we get a NBMA tunnel mode like we have it for ipv4 and sit tunnels. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06ipv6: Allow sending packets through tunnels with wildcard endpointsSteffen Klassert
Currently we need the IP6_TNL_F_CAP_XMIT capabiltiy to transmit packets through an ipv6 tunnel. This capability is set when the tunnel gets configured, based on the tunnel endpoint addresses. On tunnels with wildcard tunnel endpoints, we need to do the capabiltiy checking on a per packet basis like it is done in the receive path. This patch extends ip6_tnl_xmit_ctl() to take local and remote addresses as parameters to allow for per packet capabiltiy checking. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06Bluetooth: Sort switch cases by opcode's numeric valueKuba Pawlak
Opcodes in switch/case in hci_cmd_status_evt are not sorted by value. This patch restores proper ordering. Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-06Bluetooth: Clear role switch pending flagKuba Pawlak
If role switch was rejected by the controller and HCI Event: Command Status returned with status "Command Disallowed" (0x0C) the flag HCI_CONN_RSWITCH_PEND remains set. No further role switches are possible as this flag prevents us from sending any new HCI Switch Role requests and the only way to clear it is to receive a valid HCI Event Switch Role. This patch clears the flag if command was rejected. 2013-01-01 00:03:44.209913 < HCI Command: Switch Role (0x02|0x000b) plen 7 bdaddr BC:C6:DB:C4:6F:79 role 0x00 Role: Master 2013-01-01 00:03:44.210867 > HCI Event: Command Status (0x0f) plen 4 Switch Role (0x02|0x000b) status 0x0c ncmd 1 Error: Command Disallowed Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-06mac80211: Fix regression that triggers a kernel BUG with CCMPRonald Wahl
Commit 7ec7c4a9a686c608315739ab6a2b0527a240883c (mac80211: port CCMP to cryptoapi's CCM driver) introduced a regression when decrypting empty packets (data_len == 0). This will lead to backtraces like: (scatterwalk_start) from [<c01312f4>] (scatterwalk_map_and_copy+0x2c/0xa8) (scatterwalk_map_and_copy) from [<c013a5a0>] (crypto_ccm_decrypt+0x7c/0x25c) (crypto_ccm_decrypt) from [<c032886c>] (ieee80211_aes_ccm_decrypt+0x160/0x170) (ieee80211_aes_ccm_decrypt) from [<c031c628>] (ieee80211_crypto_ccmp_decrypt+0x1ac/0x238) (ieee80211_crypto_ccmp_decrypt) from [<c032ef28>] (ieee80211_rx_handlers+0x870/0x1d24) (ieee80211_rx_handlers) from [<c0330c7c>] (ieee80211_prepare_and_rx_handle+0x8a0/0x91c) (ieee80211_prepare_and_rx_handle) from [<c0331260>] (ieee80211_rx+0x568/0x730) (ieee80211_rx) from [<c01d3054>] (__carl9170_rx+0x94c/0xa20) (__carl9170_rx) from [<c01d3324>] (carl9170_rx_stream+0x1fc/0x320) (carl9170_rx_stream) from [<c01cbccc>] (carl9170_usb_tasklet+0x80/0xc8) (carl9170_usb_tasklet) from [<c00199dc>] (tasklet_hi_action+0x88/0xcc) (tasklet_hi_action) from [<c00193c8>] (__do_softirq+0xcc/0x200) (__do_softirq) from [<c0019734>] (irq_exit+0x80/0xe0) (irq_exit) from [<c0009c10>] (handle_IRQ+0x64/0x80) (handle_IRQ) from [<c000c3a0>] (__irq_svc+0x40/0x4c) (__irq_svc) from [<c0009d44>] (arch_cpu_idle+0x2c/0x34) Such packets can appear for example when using the carl9170 wireless driver because hardware sometimes generates garbage when the internal FIFO overruns. This patch adds an additional length check. Cc: stable@vger.kernel.org Fixes: 7ec7c4a9a686 ("mac80211: port CCMP to cryptoapi's CCM driver") Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-05openvswitch: Avoid NULL mask check while building maskPravin B Shelar
OVS does mask validation even if it does not need to convert netlink mask attributes to mask structure. ovs_nla_get_match() caller can pass NULL mask structure pointer if the caller does not need mask. Therefore NULL check is required in SW_FLOW_KEY* macros. Following patch does not convert mask netlink attributes if mask pointer is NULL, so we do not need these checks in SW_FLOW_KEY* macro. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Daniele Di Proietto <ddiproietto@vmware.com> Acked-by: Andy Zhou <azhou@nicira.com>
2014-11-05openvswitch: Refactor action alloc and copy api.Pravin B Shelar
There are two separate API to allocate and copy actions list. Anytime OVS needs to copy action list, it needs to call both functions. Following patch moves action allocation to copy function to avoid code duplication. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com>
2014-11-05openvswitch: Move key_attr_size() to flow_netlink.h.Joe Stringer
flow-netlink has netlink related code. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Remove flow member from struct ovs_skb_cbLorand Jakab
The 'flow' memeber was chosen for removal because it's only used in ovs_execute_actions() we can pass it as argument to this function. Signed-off-by: Lorand Jakab <lojakab@cisco.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Drop packets when interdev is not upChunhe Li
If the internal device is not up, it should drop received packets. Sometimes it receive the broadcast or multicast packets, and the ip protocol stack will casue more cpu usage wasted. Signed-off-by: Chunhe Li <lichunhe@huawei.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Refactor get_dp() function into multiple access APIs.Andy Zhou
Avoid recursive read_rcu_lock() by using the lighter weight get_dp_rcu() API. Add proper locking assertions to get_dp(). Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Refactor ovs_flow_cmd_fill_info().Joe Stringer
Split up ovs_flow_cmd_fill_info() to make it easier to cache parts of a dump reply. This will be used to streamline flow_dump in a future patch. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: refactor do_output() to move NULL check out of fast pathAndy Zhou
skb_clone() NULL check is implemented in do_output(), as past of the common (fast) path. Refactoring so that NULL check is done in the slow path, immediately after skb_clone() is called. Besides optimization, this change also improves code readability by making the skb_clone() NULL check consistent within OVS datapath module. Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Additional logging for -EINVAL on flow setups.Jesse Gross
There are many possible ways that a flow can be invalid so we've added logging for most of them. This adds logs for the remaining possible cases so there isn't any ambiguity while debugging. CC: Federico Iezzi <fiezzi@enter.it> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@noironetworks.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Remove redundant tcp_flags code.Joe Stringer
These two cases used to be treated differently for IPv4/IPv6, but they are now identical. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05openvswitch: Move table destroy to dp-rcu callback.Pravin B Shelar
Ths simplifies flow-table-destroy API. No need to pass explicit parameter about context. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@redhat.com>
2014-11-05openvswitch: Add basic MPLS support to kernelSimon Horman
Allow datapath to recognize and extract MPLS labels into flow keys and execute actions which push, pop, and set labels on packets. Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer. Cc: Ravi K <rkerur@gmail.com> Cc: Leo Alterman <lalterman@nicira.com> Cc: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Joe Stringer <joe@wand.net.nz> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05net: Remove MPLS GSO feature.Pravin B Shelar
Device can export MPLS GSO support in dev->mpls_features same way it export vlan features in dev->vlan_features. So it is safe to remove NETIF_F_GSO_MPLS redundant flag. Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
2014-11-05fou: Fix typo in returning flags in netlinkTom Herbert
When filling netlink info, dport is being returned as flags. Fix instances to return correct value. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUsDaniel Borkmann
It has been reported that generating an MLD listener report on devices with large MTUs (e.g. 9000) and a high number of IPv6 addresses can trigger a skb_over_panic(): skbuff: skb_over_panic: text:ffffffff80612a5d len:3776 put:20 head:ffff88046d751000 data:ffff88046d751010 tail:0xed0 end:0xec0 dev:port1 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:100! invalid opcode: 0000 [#1] SMP Modules linked in: ixgbe(O) CPU: 3 PID: 0 Comm: swapper/3 Tainted: G O 3.14.23+ #4 [...] Call Trace: <IRQ> [<ffffffff80578226>] ? skb_put+0x3a/0x3b [<ffffffff80612a5d>] ? add_grhead+0x45/0x8e [<ffffffff80612e3a>] ? add_grec+0x394/0x3d4 [<ffffffff80613222>] ? mld_ifc_timer_expire+0x195/0x20d [<ffffffff8061308d>] ? mld_dad_timer_expire+0x45/0x45 [<ffffffff80255b5d>] ? call_timer_fn.isra.29+0x12/0x68 [<ffffffff80255d16>] ? run_timer_softirq+0x163/0x182 [<ffffffff80250e6f>] ? __do_softirq+0xe0/0x21d [<ffffffff8025112b>] ? irq_exit+0x4e/0xd3 [<ffffffff802214bb>] ? smp_apic_timer_interrupt+0x3b/0x46 [<ffffffff8063f10a>] ? apic_timer_interrupt+0x6a/0x70 mld_newpack() skb allocations are usually requested with dev->mtu in size, since commit 72e09ad107e7 ("ipv6: avoid high order allocations") we have changed the limit in order to be less likely to fail. However, in MLD/IGMP code, we have some rather ugly AVAILABLE(skb) macros, which determine if we may end up doing an skb_put() for adding another record. To avoid possible fragmentation, we check the skb's tailroom as skb->dev->mtu - skb->len, which is a wrong assumption as the actual max allocation size can be much smaller. The IGMP case doesn't have this issue as commit 57e1ab6eaddc ("igmp: refine skb allocations") stores the allocation size in the cb[]. Set a reserved_tailroom to make it fit into the MTU and use skb_availroom() helper instead. This also allows to get rid of igmp_skb_size(). Reported-by: Wei Liu <lw1a2.jing@gmail.com> Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: David L Stevens <david.stevens@oracle.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Convert SEQ_START_TOKEN/seq_printf to seq_putsJoe Perches
Using a single fixed string is smaller code size than using a format and many string arguments. Reduces overall code size a little. $ size net/ipv4/igmp.o* net/ipv6/mcast.o* net/ipv6/ip6_flowlabel.o* text data bss dec hex filename 34269 7012 14824 56105 db29 net/ipv4/igmp.o.new 34315 7012 14824 56151 db57 net/ipv4/igmp.o.old 30078 7869 13200 51147 c7cb net/ipv6/mcast.o.new 30105 7869 13200 51174 c7e6 net/ipv6/mcast.o.old 11434 3748 8580 23762 5cd2 net/ipv6/ip6_flowlabel.o.new 11491 3748 8580 23819 5d0b net/ipv6/ip6_flowlabel.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05tcp: zero retrans_stamp if all retrans were ackedMarcelo Leitner
Ueki Kohei reported that when we are using NewReno with connections that have a very low traffic, we may timeout the connection too early if a second loss occurs after the first one was successfully acked but no data was transfered later. Below is his description of it: When SACK is disabled, and a socket suffers multiple separate TCP retransmissions, that socket's ETIMEDOUT value is calculated from the time of the *first* retransmission instead of the *latest* retransmission. This happens because the tcp_sock's retrans_stamp is set once then never cleared. Take the following connection: Linux remote-machine | | send#1---->(*1)|--------> data#1 --------->| | | | RTO : : | | | ---(*2)|----> data#1(retrans) ---->| | (*3)|<---------- ACK <----------| | | | | : : | : : | : : 16 minutes (or more) : | : : | : : | : : | | | send#2---->(*4)|--------> data#2 --------->| | | | RTO : : | | | ---(*5)|----> data#2(retrans) ---->| | | | | | | RTO*2 : : | | | | | | ETIMEDOUT<----(*6)| | (*1) One data packet sent. (*2) Because no ACK packet is received, the packet is retransmitted. (*3) The ACK packet is received. The transmitted packet is acknowledged. At this point the first "retransmission event" has passed and been recovered from. Any future retransmission is a completely new "event". (*4) After 16 minutes (to correspond with retries2=15), a new data packet is sent. Note: No data is transmitted between (*3) and (*4). The socket's timeout SHOULD be calculated from this point in time, but instead it's calculated from the prior "event" 16 minutes ago. (*5) Because no ACK packet is received, the packet is retransmitted. (*6) At the time of the 2nd retransmission, the socket returns ETIMEDOUT. Therefore, now we clear retrans_stamp as soon as all data during the loss window is fully acked. Reported-by: Ueki Kohei Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Add and use skb_copy_datagram_msg() helper.David S. Miller
This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05gue: Receive side of remote checksum offloadTom Herbert
Add processing of the remote checksum offload option in both the normal path as well as the GRO path. The implements patching the affected checksum to derive the offloaded checksum. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05gue: TX support for using remote checksum offload optionTom Herbert
Add if_tunnel flag TUNNEL_ENCAP_FLAG_REMCSUM to configure remote checksum offload on an IP tunnel. Add logic in gue_build_header to insert remote checksum offload option. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05udp: Changes to udp_offload to support remote checksum offloadTom Herbert
Add a new GSO type, SKB_GSO_TUNNEL_REMCSUM, which indicates remote checksum offload being done (in this case inner checksum must not be offloaded to the NIC). Added logic in __skb_udp_tunnel_segment to handle remote checksum offload case. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05gue: Add infrastructure for flags and optionsTom Herbert
Add functions and basic definitions for processing standard flags, private flags, and control messages. This includes definitions to compute length of optional fields corresponding to a set of flags. Flag validation is in validate_gue_flags function. This checks for unknown flags, and that length of optional fields is <= length in guehdr hlen. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05udp: Offload outer UDP tunnel csum if availableTom Herbert
In __skb_udp_tunnel_segment if outer UDP checksums are enabled and ip_summed is not already CHECKSUM_PARTIAL, set up checksum offload if device features allow it. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05net: Move fou_build_header into fou.c and refactorTom Herbert
Move fou_build_header out of ip_tunnel.c and into fou.c splitting it up into fou_build_header, gue_build_header, and fou_build_udp. This allows for other users for TX of FOU or GUE. Change ip_tunnel_encap to call fou_build_header or gue_build_header based on the tunnel encapsulation type. Similarly, added fou_encap_hlen and gue_encap_hlen functions which are called by ip_encap_hlen. New net/fou.h has prototypes and defines for this. Added NET_FOU_IP_TUNNELS configuration. When this is set, IP tunnels can use FOU/GUE and fou module is also selected. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05mac802154: fix typo promisuous to promiscuousAlexander Aring
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: use IEEE802154_EXTENDED_ADDR_LENAlexander Aring
This patch removes the af_ieee802154 defines and use the IEEE802154_EXTENDED_ADDR_LEN. We should do this everywhere in the 802.15.4 subsystem because af_ieee802154 should be normally an uapi header. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: add support for perm_extended_addrAlexander Aring
This patch adding support for a perm extended address. This is useful when a device supports an eeprom with a programmed static extended address. If a device doesn't support such eeprom or serial registers then the driver should generate a random extended address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: cleanup ieee802154_netdev_to_extended_addrAlexander Aring
This patch cleanups the ieee802154_be64_to_le64 to have a similar function like ieee802154_le64_to_be64 only with switched source and destionation types. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: add ieee802154_vif structAlexander Aring
This patch adds an ieee802154_vif similar like the ieee80211_vif which holds the interface type and maybe further more attributes like the ieee80211_vif structure. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: add default interface registrationAlexander Aring
This patch adds a default interface registration for a wpan interface type. Currently the 802.15.4 subsystem need to call userspace tools to add an interface. This patch is like mac80211 handling for registration a station interface type by default. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: remove mlme get_phy callbackAlexander Aring
This patch removes the get_phy callback from mlme ops structure. Instead we doing a dereference via ieee802154_ptr dev pointer. For backwards compatibility we need to run get_device after dereference wpan_phy via ieee802154_ptr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: rework interface registrationAlexander Aring
This patch meld mac802154_netdev_register into ieee802154_if_add function. Also we have now only one alloc_netdev call with one interface setup routine "ieee802154_if_setup" instead two different one for each interface type. This patch checks via runtime the interface type and do different handling now. Additional we add the wpan_dev struct in ieee802154_sub_if_data and set the new ieee802154_ptr while netdev registration. This behaviour is very similar the mac80211 netdev registration functionality. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05mac802154: move dev_hold out of ieee802154_if_addAlexander Aring
This patch moves the dev_hold call inside of nl-phy ieee802154_add_iface function. The ieee802154_add_iface is the only one function which use the ieee802154_if_add function and contains the corresponding dev_put call. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-14 20:12:49 +0000