summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2010-04-13ipv6: additional ref count for hash list unnecessarystephen hemminger
Since an address in hash list has to already have a ref count, no additional ref count is needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13IPv6: keep tentative addresses in hash tablestephen hemminger
When link goes down, want address to be preserved but in a tentative state, therefore it has to stay in hash list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13IPv6: keep route for tentative addressstephen hemminger
Recent changes preserve IPv6 address when link goes down (good). But would cause address to point to dead dst entry (bad). The simplest fix is to just not delete route if address is being held for later use. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13netfilter: fix some coding styles and remove moduleparam.hZhitong Wang
Fix some coding styles and remove moduleparam.h Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-13net: sk_dst_cache RCUificationEric Dumazet
With latest CONFIG_PROVE_RCU stuff, I felt more comfortable to make this work. sk->sk_dst_cache is currently protected by a rwlock (sk_dst_lock) This rwlock is readlocked for a very small amount of time, and dst entries are already freed after RCU grace period. This calls for RCU again :) This patch converts sk_dst_lock to a spinlock, and use RCU for readers. __sk_dst_get() is supposed to be called with rcu_read_lock() or if socket locked by user, so use appropriate rcu_dereference_check() condition (rcu_read_lock_held() || sock_owned_by_user(sk)) This patch avoids two atomic ops per tx packet on UDP connected sockets, for example, and permits sk_dst_lock to be much less dirtied. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13net: Dont use netdev_warn()Eric Dumazet
Dont use netdev_warn() in dev_cap_txqueue() and get_rps_cpu() so that we can catch following warnings without crash. bond0.2240 received packet on queue 6, but number of RX queues is 1 bond0.2240 received packet on queue 11, but number of RX queues is 1 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13packet: support for TX time stamps on RAW socketsRichard Cochran
Enable the SO_TIMESTAMPING socket infrastructure for raw packet sockets. We introduce PACKET_TX_TIMESTAMP for the control message cmsg_type. Similar support for UDP and CAN sockets was added in commit 51f31cabe3ce5345b51e4a4f82138b38c4d5dc91 Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: svcrdma: RDMA support not yet compatible with RPC6
2010-04-11tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skbDavid S. Miller
Back in commit 04a0551c87363f100b04d28d7a15a632b70e18e7 ("loopback: Drop obsolete ip_summed setting") we stopped setting CHECKSUM_UNNECESSARY in the loopback xmit. This is because such a setting was a lie since it implies that the checksum field of the packet is properly filled in. Instead what happens normally is that CHECKSUM_PARTIAL is set and skb->csum is calculated as needed. But this was only happening for TCP data packets (via the skb->ip_summed assignment done in tcp_sendmsg()). It doesn't happen for non-data packets like ACKs etc. Fix this by setting skb->ip_summed in the common non-data packet constructor. It already is setting skb->csum to zero. But this reminds us that we still have things like ip_output.c's ip_dev_loopback_xmit() which sets skb->ip_summed to the value CHECKSUM_UNNECESSARY, which Herbert's patch teaches us is not valid. So we'll have to address that at some point too. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11inet: Remove unused send_check length argumentHerbert Xu
inet: Remove unused send_check length argument This patch removes the unused length argument from the send_check function in struct inet_connection_sock_af_ops. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Yinghai <yinghai.lu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv6Herbert Xu
tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv6 This patch moves the common code between tcp_v6_send_check and tcp_v6_gso_send_check into a new function __tcp_v6_send_check. It then uses the new function in tcp_v6_send_synack as well as tcp_v6_send_response so that they handle CHECKSUM_PARTIAL properly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Yinghai <yinghai.lu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv4Herbert Xu
tcp: Handle CHECKSUM_PARTIAL for SYNACK packets for IPv4 This patch moves the common code between tcp_v4_send_check and tcp_v4_gso_send_check into a new function __tcp_v4_send_check. It then uses the new function in tcp_v4_send_synack so that it handles CHECKSUM_PARTIAL properly. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Yinghai <yinghai.lu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-11Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2010-04-11Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"David S. Miller
This reverts commit 2626419ad5be1a054d350786b684b41d23de1538. It causes regressions for people with IGB cards. Connection requests don't complete etc. The true cause of the issue is still not known, but we should sort this out in net-next-2.6 not net-2.6 Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-09mac80211: check whether scan is in progress before queueing scan_workTeemu Paasikivi
As scan_work is queued from work_work it needs to be checked if scan has been started during execution of work_work. Otherwise, when hw scan is used, the stack gets error about hw being busy with ongoing scan. This causes the stack to abort scan without notifying the driver about it. This leads to a situation where the hw is scanning and the stack thinks it's not. Then when the scan finishes, the stack will complain by warnings. Signed-off-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09mac80211: fix typo for LDPC capabilityLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09mac80211: delay skb linearising in rx decryptionZhu Yi
We delay the skb linearising in ieee80211_rx_h_decrypt so that frames do not require software decryption are not linearized. We are safe to do this because ieee80211_get_mmie_keyidx() only requires to touch nonlinear data for management frames, which are already linearized before getting here. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-09netfilter: xt_LED: add refcounts to LED targetAdam Nielsen
Add reference counting to the netfilter LED target, to fix errors when multiple rules point to the same target ("LED trigger already exists"). Signed-off-by: Adam Nielsen <a.nielsen@shikadi.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-09netfilter: remove invalid rcu_dereference() callsPatrick McHardy
The CONFIG_PROVE_RCU option discovered a few invalid uses of rcu_dereference() in netfilter. In all these cases, the code code intends to check whether a pointer is already assigned when performing registration or whether the assigned pointer matches when performing unregistration. The entire registration/ unregistration is protected by a mutex, so we don't need the rcu_dereference() calls. Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-08mac80211: enhance tracingJohannes Berg
Enhance tracing by adding tracing for a variety of callbacks that the drivers call, and also for internal calls (currently limited to queue status). This can aid debugging what is going on in mac80211 in interaction with drivers, since we can now see what drivers call and not just what mac80211 calls in the driver. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08mac80211: Moved mesh action codes to a more visible locationJavier Cardona
Grouped mesh action codes together with the other action codes in ieee80211.h. Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skbDavid S. Miller
Back in commit 04a0551c87363f100b04d28d7a15a632b70e18e7 ("loopback: Drop obsolete ip_summed setting") we stopped setting CHECKSUM_UNNECESSARY in the loopback xmit. This is because such a setting was a lie since it implies that the checksum field of the packet is properly filled in. Instead what happens normally is that CHECKSUM_PARTIAL is set and skb->csum is calculated as needed. But this was only happening for TCP data packets (via the skb->ip_summed assignment done in tcp_sendmsg()). It doesn't happen for non-data packets like ACKs etc. Fix this by setting skb->ip_summed in the common non-data packet constructor. It already is setting skb->csum to zero. But this reminds us that we still have things like ip_output.c's ip_dev_loopback_xmit() which sets skb->ip_summed to the value CHECKSUM_UNNECESSARY, which Herbert's patch teaches us is not valid. So we'll have to address that at some point too. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08udp: fix for unicast RX path optimizationJorge Boncompte [DTI2]
Commits 5051ebd275de672b807c28d93002c2fb0514a3c9 and 5051ebd275de672b807c28d93002c2fb0514a3c9 ("ipv[46]: udp: optimize unicast RX path") broke some programs. After upgrading a L2TP server to 2.6.33 it started to fail, tunnels going up an down, after the 10th tunnel came up. My modified rp-l2tp uses a global unconnected socket bound to (INADDR_ANY, 1701) and one connected socket per tunnel after parameter negotiation. After ten sockets were open and due to mixed parameters to udp[46]_lib_lookup2() kernel started to drop packets. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into merge Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/iwlwifi/iwl-4965.c drivers/net/wireless/iwlwifi/iwl-agn.c drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/iwlwifi/iwl-tx.c
2010-04-08netfilter: only do skb_checksum_help on CHECKSUM_PARTIAL in nfnetlink_queueHerbert Xu
As we will set ip_summed to CHECKSUM_NONE when necessary in nfqnl_mangle, there is no need to zap CHECKSUM_COMPLETE in nfqnl_build_packet_message. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-08netfilter: only do skb_checksum_help on CHECKSUM_PARTIAL in ip6_queueHerbert Xu
As we will set ip_summed to CHECKSUM_NONE when necessary in ipq_mangle_ipv6, there is no need to zap CHECKSUM_COMPLETE in ipq_build_packet_message. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-08netfilter: only do skb_checksum_help on CHECKSUM_PARTIAL in ip_queueHerbert Xu
While doing yet another audit on ip_summed I noticed ip_queue calling skb_checksum_help unnecessarily. As we will set ip_summed to CHECKSUM_NONE when necessary in ipq_mangle_ipv4, there is no need to zap CHECKSUM_COMPLETE in ipq_build_packet_message. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-08IPVS: fix potential stack overflow with overly long protocol namesPatrick McHardy
When protocols use very long names, the sprintf calls might overflow the on-stack buffer. No protocol in the kernel does this however. Print the protocol name in the pr_debug statement directly to avoid this. Based on patch by Zhitong Wang <zhitong.wangzt@alibaba-inc.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-07net: fix ethtool coding style errors and warningschavey
Fix coding style errors and warnings output while running checkpatch.pl on the files net/core/ethtool.c and include/linux/ethtool.h Signed-off-by: chavey <chavey@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07x.25 attempts to negotiate invalid throughputJohn Hughes
The current X.25 code has some bugs in throughput negotiation: 1. It does negotiation in all cases, usually there is no need 2. It incorrectly attempts to negotiate the throughput class in one direction only. There are separate throughput classes for input and output and if either is negotiated both mist be negotiates. This is bug https://bugzilla.kernel.org/show_bug.cgi?id=15681 This bug was first reported by Daniel Ferenci to the linux-x25 mailing list on 6/8/2004, but is still present. The current (2.6.34) x.25 code doesn't seem to know that the X.25 throughput facility includes two values, one for the required throughput outbound, one for inbound. This causes it to attempt to negotiate throughput 0x0A, which is throughput 9600 inbound and the illegal value "0" for inbound throughput. Because of this some X.25 devices (e.g. Cisco 1600) refuse to connect to Linux X.25. The following patch fixes this behaviour. Unless the user specifies a required throughput it does not attempt to negotiate. If the user does not specify a throughput it accepts the suggestion of the remote X.25 system. If the user requests a throughput then it validates both the input and output throughputs and correctly negotiates them with the remote end. Signed-off-by: John Hughes <john@calva.com> Tested-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.John Hughes
Here is a patch to stop X.25 examining fields beyond the end of the packet. For example, when a simple CALL ACCEPTED was received: 10 10 0f x25_parse_facilities was attempting to decode the FACILITIES field, but this packet contains no facilities field. Signed-off-by: John Hughes <john@calva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07bridge: Fix IGMP3 report parsingHerbert Xu
The IGMP3 report parsing is looking at the wrong address for group records. This patch fixes it. Reported-by: Banyeer <banyeer@yahoo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07net: include linux/proc_fs.h in dev_addr_lists.cEric Dumazet
As pointed by Randy Dunlap, we must include linux/proc_fs.h in net/core/dev_addr_lists.c, regardless of CONFIG_PROC_FS Reported-by: Randy Dunlap <randy.dunlap@oracle.com>, Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-07mac80211: fix paged RX cryptoJohannes Berg
WEP crypto was broken, but upon finding the problem it is evident that other things were broken by the paged RX patch as well. To fix it, for now move the linearising in front. This means that we linearise all frames, which is not at all what we want, but at least it fixes the problem for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: fix some RX aggregation lockingJohannes Berg
A few places in mac80211 do not currently acquire the sta lock for RX aggregation, but they should. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: clean up/fix aggregation codeJohannes Berg
The aggregation code has a number of quirks, like inventing an unneeded WLAN_BACK_TIMER value and leaking memory under certain circumstances during station destruction. Fix these issues by using the regular aggregation session teardown code and blocking new aggregation sessions, all before the station is really destructed. As a side effect, this gets rid of the long code block to destroy aggregation safely. Additionally, rename tid_state_rx which can only have the values IDLE and OPERATIONAL to tid_active_rx to make it easier to understand that there is no bitwise stuff going on on the RX side -- the TX side remains because it needs to keep track of the driver and peer states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: rename WLAN_STA_SUSPEND to WLAN_STA_BLOCK_BAJohannes Berg
I want to use it during station destruction as well so rename it to WLAN_STA_BLOCK_BA which is also the only use of it now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: remove ieee80211_sta_stop_rx_ba_sessionJohannes Berg
All callers of ieee80211_sta_stop_rx_ba_session can just call __ieee80211_stop_rx_ba_session instead because they already have the station struct, so do that and remove ieee80211_sta_stop_rx_ba_session. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: remove irq disabling for sta lockJohannes Berg
All other places except one in the TX path, which has BHs disabled, and it also cannot be locked from interrupts so disabling IRQs is not necessary. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07mac80211: fix station destruction problemJohannes Berg
When a station w/o a key is destroyed, or when a driver submits work for a station and thereby references it again, it seems like potentially we could reference the station structure while it is being destroyed. Wait for an RCU grace period to elapse before finishing destroying the station after we have removed the station from the driver and from the hash table etc., even in the case where no key is associated with the station. Also, there's no point in deleting the plink timer here since it'll be properly deleted just a bit later. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07cfg80211: Add local-state-change-only auth/deauth/disassocJouni Malinen
cfg80211 is quite strict on allowing authentication and association commands only in certain states. In order to meet these requirements, user space applications may need to clear authentication or association state in some cases. Currently, this can be done with deauth/disassoc command, but that ends up sending out Deauthentication or Disassociation frame unnecessarily. Add a new nl80211 attribute to allow this sending of the frame be skipped, but with all other deauth/disassoc operations being completed. Similar state change is also needed for IEEE 802.11r FT protocol in the FT-over-DS case which does not use Authentication frame exchange in a transition to another BSS. For this to work with cfg80211, an authentication entry needs to be created for the target BSS without sending out an Authentication frame. The nl80211 authentication command can be used for this purpose, too, with the new attribute to indicate that the command is only for changing local state. This enables wpa_supplicant to complete FT-over-DS transition successfully. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-07flow: delayed deletion of flow cache entriesTimo Teräs
Speed up lookups by freeing flow cache entries later. After virtualizing flow cache entry operations, the flow cache may now end up calling policy or bundle destructor which can be slowish. As gc_list is more effective with double linked list, the flow cache is converted to use common hlist and list macroes where appropriate. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07xfrm: remove policy garbage collectionTimo Teräs
Policies are now properly reference counted and destroyed from all code paths. The delayed gc is just an overhead now and can be removed. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07xfrm: cache bundles instead of policies for outgoing flowsTimo Teräs
__xfrm_lookup() is called for each packet transmitted out of system. The xfrm_find_bundle() does a linear search which can kill system performance depending on how many bundles are required per policy. This modifies __xfrm_lookup() to store bundles directly in the flow cache. If we did not get a hit, we just create a new bundle instead of doing slow search. This means that we can now get multiple xfrm_dst's for same flow (on per-cpu basis). Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07flow: virtualize flow cache entry methodsTimo Teräs
This allows to validate the cached object before returning it. It also allows to destruct object properly, if the last reference was held in flow cache. This is also a prepartion for caching bundles in the flow cache. In return for virtualizing the methods, we save on: - not having to regenerate the whole flow cache on policy removal: each flow matching a killed policy gets refreshed as the getter function notices it smartly. - we do not have to call flow_cache_flush from policy gc, since the flow cache now properly deletes the object if it had any references Signed-off-by: Timo Teras <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-06socket: remove duplicate declaration of struct timespecHagen Paul Pfeifer
struct timespec ts was alreay defined. Reuse the previously defined one and reduce the memory footprint on the stack by 16 bytes. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06TIPC: Updated topology subscription protocol according to latest specJon Paul Maloy
This patch makes it explicit in the API that all fields in subscriptions and events exchanged with the Topology Server must be in network byte order. It also ensures that all fields of a subscription are compared when cancelling a subscription, in order to avoid inadvertent cancelling of the wrong subscription. Finally, the tipc module version is updated to 2.0.0, to reflect the API change. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 15:08:30 +0000