summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2010-03-15net-2.6 [Bug-Fix][dccp]: fix oops caused after failed initialisationGerrit Renker
dccp: fix panic caused by failed initialisation This fixes a kernel panic reported thanks to Andre Noll: if DCCP is compiled into the kernel and any out of the initialisation steps in net/dccp/proto.c:dccp_init() fail, a subsequent attempt to create a SOCK_DCCP socket will panic, since inet{,6}_create() are not prevented from creating DCCP sockets. This patch fixes the problem by propagating a failure in dccp_init() to dccp_v{4,6}_init_net(), and from there to dccp_v{4,6}_init(), so that the DCCP protocol is not made available if its initialisation fails. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15phonet: use for_each_set_bit()Akinobu Mita
Replace open-coded loop with for_each_set_bit(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-15mac80211: optimize tx status processingFelix Fietkau
When a cooked monitor interface is active, ieee80211_tx_status() generates a radiotap header for every single frame, even if it wasn't injected and thus won't be sent to a monitor interface. This patch reduces cpu utilization by moving the cooked monitor check a bit earlier, before it generates the rtap header. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-15netfilter: net/netfilter/ipvs/ip_vs_ftp.c: Remove use of NIPQUADJoe Perches
NIPQUAD has very few uses left. Remove this use and make the code have the identical form of the only other use of "%u,%u,%u,%u,%u,%u" in net/ipv4/netfilter/nf_nat_ftp.c Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-14sunrpc: never return expired entries in sunrpc_cache_lookupNeilBrown
If sunrpc_cache_lookup finds an expired entry, remove it from the cache and return a freshly created non-VALID entry instead. This ensures that we only ever get a usable entry, or an entry that will become usable once an update arrives. i.e. we will never need to repeat the lookup. This allows us to remove the 'is_expired' test from cache_check (i.e. from cache_is_valid). cache_check should never get an expired entry as 'lookup' will never return one. If it does happen - due to inconvenient timing - then just accept it as still valid, it won't be very much past it's use-by date. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-03-14sunrpc/cache: factor out cache_is_expiredNeilBrown
This removes a tiny bit of code duplication, but more important prepares for following patch which will perform the expiry check in cache_lookup and the rest of the validity check in cache_check. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-03-14sunrpc: don't keep expired entries in the auth caches.NeilBrown
currently expired entries remain in the auth caches as long as there is a reference. This was needed long ago when the auth_domain cache used the same cache infrastructure. But since that (being a very different sort of cache) was separated, this test is no longer needed. So remove the test on refcnt and tidy up the surrounding code. This allows the cache_dequeue call (which needed to be there to drop a potentially awkward reference) can be moved outside of the spinlock which is a better place for it. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-03-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: Skip check for mandatory locks when unlocking 9p: Fixes a simple bug enabling writes beyond 2GB. 9p: Change the name of new protocol from 9p2010.L to 9p2000.L fs/9p: re-init the wstat in readdir loop net/9p: Add sysfs mount_tag file for virtio 9P device net/9p: Use the tag name in the config space for identifying mount point
2010-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits) bridge: ensure to unlock in error path in br_multicast_query(). drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages sky2: Avoid rtnl_unlock without rtnl_lock ipv6: Send netlink notification when DAD fails drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant ipconfig: Handle devices which take some time to come up. mac80211: Fix memory leak in ieee80211_if_write() mac80211: Fix (dynamic) power save entry ipw2200: use kmalloc for large local variables ath5k: read eeprom IQ calibration values correctly for G mode ath5k: fix I/Q calibration (for real) ath5k: fix TSF reset ath5k: use fixed antenna for tx descriptors libipw: split ieee->networks into small pieces mac80211: Fix sta_mtx unlocking on insert STA failure path rt2x00: remove KSEG1ADDR define from rt2x00soc.h net: add ColdFire support to the smc91x driver asix: fix setting mac address for AX88772 ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}. net: Fix dev_mc_add() ...
2010-03-13bridge: ensure to unlock in error path in br_multicast_query().YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13ipv6: Send netlink notification when DAD failsHerbert Xu
If we are managing IPv6 addresses using DHCP, it would be nice for user-space to be notified if an address configured through DHCP fails DAD. Otherwise user-space would have to poll to see whether DAD succeeds. This patch uses the existing notification mechanism and simply hooks it into the DAD failure code path. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-13Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-139p: Change the name of new protocol from 9p2010.L to 9p2000.LSripathi Kodi
This patch changes the name of the new 9P protocol from 9p2010.L to 9p2000.u. This is because we learnt that the name 9p2010 is already being used by others. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13net/9p: Add sysfs mount_tag file for virtio 9P deviceAneesh Kumar K.V
This adds a new file for virtio 9P device. The file contain details of the mount device name that should be used to mount the 9P file system. Ex: /sys/devices/virtio-pci/virtio1/mount_tag file now contian the tag name to be used to mount the 9P file system. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-13net/9p: Use the tag name in the config space for identifying mount pointAneesh Kumar K.V
This patch use the tag name in the config space to identify the mount device. The the virtio device name depend on the enumeration order of the device and may not remain the same across multiple boots So we use the tag name which is set via qemu option to uniquely identify the mount device Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12ipconfig: Handle devices which take some time to come up.David S. Miller
Some network devices, particularly USB ones, take several seconds to fully init and appear in the device list. If the user turned ipconfig on, they are using it for NFS root or some other early booting purpose. So it makes no sense to just flat out fail immediately if the device isn't found. It also doesn't make sense to just jack up the initial wait to something crazy like 10 seconds. Instead, poll immediately, and then periodically once a second, waiting for a usable device to appear. Fail after 12 seconds. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Christian Pellegrin <chripell@fsfe.org>
2010-03-10minstrel: make the rate control ops reusable from another rc implementationFelix Fietkau
This patch makes it possible to reuse the minstrel rate control ops from another rate control module. This is useful in preparing for the new 802.11n implementation of minstrel, which will reuse the old code for legacy stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10minstrel: simplify and fix debugfs codeFelix Fietkau
This patch cleans up the debugfs read function for the statistics by using simple_read_from_buffer instead of its own semi-broken hack. Also removes a useless member of the minstrel debugfs info struct. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: give warning if building w/out rate ctrl algorithmAndres Salomon
I discovered that if EMBEDDED=y, one can accidentally build a mac80211 stack and drivers w/ no rate control algorithm. For drivers like RTL8187 that don't supply their own RC algorithms, this will cause ieee80211_register_hw to fail (making the driver unusable). This will tell kconfig to provide a warning if no rate control algorithms have been selected. That'll at least warn the user; users that know that their drivers supply a rate control algorithm can safely ignore the warning, and those who don't know (or who expect to be using multiple drivers) can select a default RC algorithm. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10enhance sysfs rfkill interfaceflorian@mickler.org
This commit introduces two new sysfs knobs. /sys/class/rfkill/rfkill[0-9]+/blocked_hw: (ro) hardblock kill state /sys/class/rfkill/rfkill[0-9]+/blocked_sw: (rw) softblock kill state Signed-off-by: Florian Mickler <florian@mickler.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix memory leak in ieee80211_if_write()Eric Dumazet
Fix memory leak and use kmalloc() instead of kzalloc() as we are going to overwrite the allocated buffer. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix (dynamic) power save entryJuuso Oikarinen
Currently hardware with !IEEE80211_HW_PS_NULLFUNC_STACK and IEEE80211_HW_REPORTS_TX_ACK_STATUS will never enter PSM due to the conditions in the power save entry functions. Fix those conditions. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10mac80211: Fix sta_mtx unlocking on insert STA failure pathJouni Malinen
Commit 34e895075e21be3e21e71d6317440d1ee7969ad0 introduced sta_mtx locking into sta_info_insert() (now sta_info_insert_rcu), but forgot to unlock this mutex on one of the error paths. Fix this by adding the missing mutex_unlock() call for the case where STA insert fails due to an entry existing already. This may happen at least in AP mode when a STA roams between two BSSes (vifs). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-10net: Fix dev_mc_add()Eric Dumazet
Commit 6e17d45a (net: add addr len check to dev_mc_add) added a bug in dev_mc_add(), since it can now exit with a lock imbalance. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10net: Annotates neigh_invalidate()Eric Dumazet
Annotates neigh_invalidate() with __releases() and __acquires() for sparse sake. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-10tcp: Fix tcp_v4_rcv()Eric Dumazet
Commit d218d111 (tcp: Generalized TTL Security Mechanism) added a bug for TIMEWAIT sockets. We should not test min_ttl for TW sockets. Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-09mac80211: use different MAC addresses for virtual interfacesJohannes Berg
Drivers can now advertise to cfg80211 that they have multiple MAC addresses reserved for a device, but we don't currently make use of that in mac80211. Change that and assign different addresses to new virtual interfaces (if addresses are available) in order to make it easier for users to use multiple virtual interfaces; they no longer need to always assign a new MAC address manually. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09mac80211: Improve software scan timingHelmut Schaa
The current software scan implemenation in mac80211 returns to the operating channel after each scanned channel. However, in some situations (e.g. no traffic) it would be nicer to scan a few channels in a row to speed up the scan itself. Hence, after scanning a channel, check if we have queued up any tx frames and return to the operating channel in that case. Unfortunately we don't know if the AP has buffered any frames for us. Hence, scan only as many channels in a row as the pm_qos latency and the negotiated listen interval allows us to. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09mac80211: fix rates setup on IBSS mergeBruno Randolf
when an IBSS merge happened, the supported rates for the newly added station were left empty, causing the rate control module to be initialized with only the basic rates. also the section of the ibss code which deals with updating supported rates for an already existing station fails to inform the rate control module about the new rates. as i don't know how to fix this (minstrel does not have an update function), i have just added a comment for now. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-09mac80211: deprecate RX status noiseJohannes Berg
The noise value as is won't be used, isn't filled by most drivers and doesn't really make a whole lot of sense on a per packet basis -- proper cfg80211 survey support in mac80211 will need to be different. Mark the struct member as deprecated so it will be removed from drivers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-08tipc: filter out messages not intended for this hostNeil Horman
Port commit 20deb48d16fdd07ce2fdc8d03ea317362217e085 from git://tipc.cslab.ericsson.net/pub/git/people/allan/tipc.git Part of the large effort I'm trying to help with getting all the downstreamed code from windriver forward ported to the upstream tree Origional commit message Restore check to filter out inadverdently received messages This patch reimplements a check that allows TIPC to discard messages that are not intended for it. This check was present in TIPC 1.5/1.6, but was removed by accident during the development of TIPC 1.7; it has now been updated to account for new features present in TIPC 1.7 and reinserted into TIPC. The main benefit of this check is to filter out messages arriving from orphaned link endpoints, which can arise when a node exits the network and then re-enters it with a different TIPC network address (i.e. <Z.C.N> value). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Origionally-authored-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tipc: fix endianness on tipc subscriber messagesNeil Horman
Remove htohl implementation from tipc I was working on forward porting the downstream commits for TIPC and ran accross this one: http://tipc.cslab.ericsson.net/cgi-bin/gitweb.cgi?p=people/allan/tipc.git;a=commitdiff;h=894279b9437b63cbb02405ad5b8e033b51e4e31e I was going to just take it, when I looked closer and noted what it was doing. This is basically a routine to byte swap fields of data in sent/received packets for tipc, dependent upon the receivers guessed endianness of the peer when a connection is established. Asside from just seeming silly to me, it appears to violate the latest RFC draft for tipc: http://tipc.sourceforge.net/doc/draft-spec-tipc-02.txt Which, according to section 4.2 and 4.3.3, requires that all fields of all commands be sent in network byte order. So instead of just taking this patch, instead I'm removing the htohl function and replacing the calls with calls to ntohl in the rx path and htonl in the send path. As part of this fix, I'm also changing the subscr_cancel function, which searches the list of subscribers, using a memcmp of the entire subscriber list, for the entry to tear down. unfortunately it memcmps the entire tipc_subscr structure which has several bits that are private to the local side, so nothing will ever match. section 5.2 of the draft spec indicates the <type,upper,lower> tuple should uniquely identify a subscriber, so convert subscr_cancel to just match on those fields (properly endian swapped). I've tested this using the tipc test suite, and its passed without issue. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08ethtool: Use noinline_for_stackEric Dumazet
Use self documenting noinline_for_stack instead of duplicated comments. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net/sunrpc: Convert (void)snprintf to snprintfJoe Perches
(Applies on top of "Remove uses of NIPQUAD, use %pI4") Casts to void of snprintf are most uncommon in kernel source. 9 use casts, 1301 do not. Remove the remaining uses in net/sunrpc/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08net/sunrpc: Remove uses of NIPQUAD, use %pI4Joe Perches
Originally submitted Jan 1, 2010 http://patchwork.kernel.org/patch/71221/ Convert NIPQUAD to the %pI4 format extension where possible Convert %02x%02x%02x%02x/NIPQUAD to %08x/ntohl Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tcp: Fix tcp_make_synack()Eric Dumazet
Commit 4957faad (TCPCT part 1g: Responder Cookie => Initiator), part of TCP_COOKIE_TRANSACTION implementation, forgot to correctly size synack skb in case user data must be included. Many thanks to Mika Pentillä for spotting this error. Reported-by: Penttillä Mika <mika.penttila@ixonos.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08rpc client can not deal with ENOSOCK, so translate it into ENOCONNBian Naimeng
If NFSv4 client send a request before connect, or the old connection was broken because a ETIMEOUT error catched by call_status, ->send_request will return ENOSOCK, but rpc layer can not deal with it, so make sure ->send_request can translate ENOSOCK into ENOCONN. Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-08net: fix route cache rebuildsEric Dumazet
We added an automatic route cache rebuilding in commit 1080d709fb9d8cd43 but had to correct few bugs. One of the assumption of original patch, was that entries where kept sorted in a given way. This assumption is known to be wrong (commit 1ddbcb005c395518 gave an explanation of this and corrected a leak) and expensive to respect. Paweł Staszewski reported to me one of his machine got its routing cache disabled after few messages like : [ 2677.850065] Route hash chain too long! [ 2677.850080] Adjust your secret_interval! [82839.662993] Route hash chain too long! [82839.662996] Adjust your secret_interval! [155843.731650] Route hash chain too long! [155843.731664] Adjust your secret_interval! [155843.811881] Route hash chain too long! [155843.811891] Adjust your secret_interval! [155843.858209] vlan0811: 5 rebuilds is over limit, route caching disabled [155843.858212] Route hash chain too long! [155843.858213] Adjust your secret_interval! This is because rt_intern_hash() might be fooled when computing a chain length, because multiple entries with same keys can differ because of TOS (or mark/oif) bits. In the rare case the fast algorithm see a too long chain, and before taking expensive path, we call a helper function in order to not count duplicates of same routes, that only differ with tos/mark/oif bits. This helper works with data already in cpu cache and is not be very expensive, despite its O(N^2) implementation. Paweł Staszewski sucessfully tested this patch on his loaded router. Reported-and-tested-by: Paweł Staszewski <pstaszewski@itcare.pl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08tcp: Add SNMP counters for backlog and min_ttl dropsEric Dumazet
Commit 6b03a53a (tcp: use limited socket backlog) added the possibility of dropping frames when backlog queue is full. Commit d218d111 (tcp: Generalized TTL Security Mechanism) added the possibility of dropping frames when TTL is under a given limit. This patch adds new SNMP MIB entries, named TCPBacklogDrop and TCPMinTTLDrop, published in /proc/net/netstat in TcpExt: line netstat -s | egrep "TCPBacklogDrop|TCPMinTTLDrop" TCPBacklogDrop: 0 TCPMinTTLDrop: 0 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-03-08netfilter: ebt_ip6: Use ipv6_masked_addr_cmp()YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Bart De Schuymer <bdschuym@pandora.be> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-03-07Driver core: Constify struct sysfs_ops in struct kobj_typeEmese Revfy
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07driver-core: Add attribute argument to class_attribute show/storeAndi Kleen
Passing the attribute to the low level IO functions allows all kinds of cleanups, by sharing low level IO code without requiring an own function for every piece of data. Also drivers can extend the attributes with own data fields and use that in the low level function. This makes the class attributes the same as sysdev_class attributes and plain attributes. This will allow further cleanups in drivers. Full tree sweep converting all users. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07bridge: Fix RCU race in br_multicast_stopHerbert Xu
Thanks to Paul McKenny for pointing out that it is incorrect to use synchronize_rcu_bh to ensure that pending callbacks have completed. Instead we should use rcu_barrier_bh. Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07bridge: Use RCU list primitive in __br_mdb_ip_getHerbert Xu
As Paul McKenney correctly pointed out, __br_mdb_ip_get needs to use the RCU list walking primitive in order to work correctly on platforms where data-dependency ordering is not guaranteed. Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07ipv6: Optmize translation between IPV6_PREFER_SRC_xxx and RT6_LOOKUP_F_xxx.YOSHIFUJI Hideaki / 吉藤英明
IPV6_PREFER_SRC_xxx definitions: | #define IPV6_PREFER_SRC_TMP 0x0001 | #define IPV6_PREFER_SRC_PUBLIC 0x0002 | #define IPV6_PREFER_SRC_COA 0x0004 RT6_LOOKUP_F_xxx definitions: | #define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008 | #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 | #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 So, we can translate between these two groups by shift operation instead of multiple 'if's. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07sock.c: potential null dereferenceDan Carpenter
We test that "prot->rsk_prot" is non-null right before we dereference it on this line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07bridge: cleanup: remove unneed checkDan Carpenter
We dereference "port" on the lines immediately before and immediately after the test so port should hopefully never be null here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-06Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits) nfsd4: fix minor memory leak svcrpc: treat uid's as unsigned nfsd: ensure sockets are closed on error Revert "sunrpc: move the close processing after do recvfrom method" Revert "sunrpc: fix peername failed on closed listener" sunrpc: remove unnecessary svc_xprt_put NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN xfs_export_operations.commit_metadata commit_metadata export operation replacing nfsd_sync_dir lockd: don't clear sm_monitored on nsm_reboot_lookup lockd: release reference to nsm_handle in nlm_host_rebooted nfsd: Use vfs_fsync_range() in nfsd_commit NFSD: Create PF_INET6 listener in write_ports SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found" SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt() NFSD: Support AF_INET6 in svc_addsock() function SUNRPC: Use rpc_pton() in ip_map_parse() nfsd: 4.1 has an rfc number nfsd41: Create the recovery entry for the NFSv4.1 client nfsd: use vfs_fsync for non-directories ...
generated by cgit (git 2.34.1) at 2025-09-14 20:13:56 +0000