| Age | Commit message (Collapse) | Author |
|---|
|
fib_trie implementation calls synchronize_rcu when a certain amount of
pages are dirty from freed entries. The number of pages was determined
experimentally in 2009 (commit c3059477fce2d).
At the current setting, synchronize_rcu is called often -- 51 times in a
second in one test with an average of an 8 msec delay adding a fib entry.
The total impact is a lot of slow down modifying the fib. This is seen
in the output of 'time' - the difference between real time and sys+user.
For example, using 720,022 single path routes and 'ip -batch'[1]:
$ time ./ip -batch ipv4/routes-1-hops
real 0m14.214s
user 0m2.513s
sys 0m6.783s
So roughly 35% of the actual time to install the routes is from the ip
command getting scheduled out, most notably due to synchronize_rcu (this
is observed using 'perf sched timehist').
This patch makes the amount of dirty memory configurable between 64k where
the synchronize_rcu is called often (small, low end systems that are memory
sensitive) to 64M where synchronize_rcu is called rarely during a large
FIB change (for high end systems with lots of memory). The default is 512kB
which corresponds to the current setting of 128 pages with a 4kB page size.
As an example, at 16MB the worst interval shows 4 calls to synchronize_rcu
in a second blocking for up to 30 msec in a single instance, and a total
of almost 100 msec across the 4 calls in the second. The trade off is
allowing FIB entries to consume more memory in a given time window but
but with much better fib insertion rates (~30% increase in prefixes/sec).
With this patch and net.ipv4.fib_sync_mem set to 16MB, the same batch
file runs in:
$ time ./ip -batch ipv4/routes-1-hops
real 0m9.692s
user 0m2.491s
sys 0m6.769s
So the dead time is reduced to about 1/2 second or <5% of the real time.
[1] 'ip' modified to not request ACK messages which improves route
insertion times by about 20%
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
use RCU when accessing the action chain, to avoid use after free in the
traffic path when 'goto chain' is replaced on existing TC actions (see
script below). Since the control action is read in the traffic path
without holding the action spinlock, we need to explicitly ensure that
a->goto_chain is not NULL before dereferencing (i.e it's not sufficient
to rely on the value of TC_ACT_GOTO_CHAIN bits). Not doing so caused NULL
dereferences in tcf_action_goto_chain_exec() when the following script:
# tc chain add dev dd0 chain 42 ingress protocol ip flower \
> ip_proto udp action pass index 4
# tc filter add dev dd0 ingress protocol ip flower \
> ip_proto udp action csum udp goto chain 42 index 66
# tc chain del dev dd0 chain 42 ingress
(start UDP traffic towards dd0)
# tc action replace action csum udp pass index 66
was run repeatedly for several hours.
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Suggested-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action vlan pop pass index 90
# tc actions replace action vlan \
> pop goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action vlan
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: vlan pop goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007974f067 P4D 800000007974f067 PUD 79638067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff982dfdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff982dfc55db00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff982df97099c0 RDI: ffff982dfc55db00
RBP: ffff982dfdb83c80 R08: ffff982df983fec8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff982df5aacd00
R13: ffff982df5aacd08 R14: 0000000000000001 R15: ffff982df97099c0
FS: 0000000000000000(0000) GS:ffff982dfdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000796d0005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? enqueue_hrtimer+0x39/0x90
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 7b ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa4714038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff840184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000001e57d3f387
RBP: 0000000000000003 R08: 001125d9ca39e1eb R09: 0000000000000000
R10: 000000000000027d R11: 000000000009f400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_vlan veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 snd_hda_intel crc32_pclmul snd_hda_codec ghash_clmulni_intel snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer virtio_balloon snd pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops virtio_blk ttm net_failover virtio_console failover ata_piix drm libata crc32c_intel virtio_pci serio_raw virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_vlan_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 \
> nocsum id 1 pass index 90
# tc actions replace action tunnel_key \
> set src_ip 10.10.10.1 dst_ip 20.20.2 dst_port 3128 nocsum id 1 \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action tunnel_key
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: tunnel_key set
src_ip 10.10.10.1
dst_ip 20.20.2.0
key_id 1
dst_port 3128
nocsum goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002aba4067 P4D 800000002aba4067 PUD 795f9067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9346bdb83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9346bb795c00 RCX: 0000000000000002
RDX: 0000000000000000 RSI: ffff93466c881700 RDI: 0000000000000246
RBP: ffff9346bdb83c80 R08: ffff9346b3e1e0c8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9346b978f000
R13: ffff9346b978f008 R14: 0000000000000001 R15: ffff93466dceeb40
FS: 0000000000000000(0000) GS:ffff9346bdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007a6c2002 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 55 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa48a8038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffaa8184f0 RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0011251c6fcfac49 R09: ffff9346b995be00
R10: ffffa48a805e7ce8 R11: 00000000024c38dd R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_tunnel_key veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel mbcache snd_hda_intel jbd2 snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev snd_timer snd pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops ttm net_failover virtio_console virtio_blk failover drm serio_raw crc32c_intel ata_piix virtio_pci floppy virtio_ring libata virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_tunnel_key_init() proved to fix
the above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbmod set smac 00:c1:a0:c1:a0:00 pass index 90
# tc actions replace action skbmod \
> set smac 00:c1:a0:c1:a0:00 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbmod
had the following output:
src MAC address <00:c1:a0:c1:a0:00>
src MAC address <00:c1:a0:c1:a0:00>
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: skbmod goto chain 42 set smac 00:c1:a0:c1:a0:00
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d5c7067 P4D 800000002d5c7067 PUD 77e16067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8987ffd83be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8987aeb68800 RCX: ffff8987fa263640
RDX: 0000000000000000 RSI: ffff8987f51c8802 RDI: 00000000000000a0
RBP: ffff8987ffd83c80 R08: ffff8987f939bac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8987f5c77d00
R13: ffff8987f5c77d08 R14: 0000000000000001 R15: ffff8987f0c29f00
FS: 0000000000000000(0000) GS:ffff8987ffd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007832c004 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 56 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffa2a1c038feb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffa94184f0 RBX: 0000000000000003 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000003
RBP: 0000000000000003 R08: 001123cfc2ba71ac R09: 0000000000000000
R10: 0000000000000000 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_skbmod veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd cryptd glue_helper snd_pcm joydev pcspkr virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover virtio_console ttm virtio_blk failover drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_skbmod_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbedit ptype host pass index 90
# tc actions replace action skbedit \
> ptype host goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbedit
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: skbedit ptype host goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00
RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00
R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0
FS: 0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_skbedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action simple sdata hello pass index 90
# tc actions replace action simple \
> sdata world goto chain 42 index 90 cookie c1a0c1a0
# tc action show action simple
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: Simple <world>
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140
RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa
R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100
R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0
FS: 0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_simple_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action sample rate 1024 group 4 pass index 90
# tc actions replace action sample \
> rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action sample
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: sample rate 1/1024 group 4 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b
RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0
RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400
R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00
R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600
FS: 0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_sample_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action police rate 3mbit burst 250k pass index 90
# tc actions replace action police \
> rate 3mbit burst 250k goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action police rate 3mbit burst
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: police 0x5a rate 3Mbit burst 250Kb mtu 2Kb action goto chain 42 overhead 0b
ref 2 bind 1
cookie c1a0c1a0
Then, when crash0 starts transmitting more than 3Mbit/s, the following
kernel crash is observed:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007a779067 P4D 800000007a779067 PUD 2ad96067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 5032 Comm: netperf Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb0e04064fa60 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff93bb3322cce0 RCX: 0000000000000005
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff93bb3322cce0
RBP: ffffb0e04064fb00 R08: 0000000000000022 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff93bb3beed300
R13: ffff93bb3beed308 R14: 0000000000000001 R15: ffff93bb3b64d000
FS: 00007f0bc6be5740(0000) GS:ffff93bb3db80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000746a8001 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ipt_do_table+0x31c/0x420 [ip_tables]
? ip_finish_output2+0x16f/0x430
ip_finish_output2+0x16f/0x430
? ip_output+0x69/0xe0
ip_output+0x69/0xe0
? ip_forward_options+0x1a0/0x1a0
__tcp_transmit_skb+0x563/0xa40
tcp_write_xmit+0x243/0xfa0
__tcp_push_pending_frames+0x32/0xf0
tcp_sendmsg_locked+0x404/0xd30
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
? __sys_connect+0x87/0xf0
? syscall_trace_enter+0x1df/0x2e0
? __audit_syscall_exit+0x216/0x260
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f0bc5ffbafd
Code: 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 8b 05 ae c4 2c 00 85 c0 75 2d 45 31 c9 45 31 c0 4c 63 d1 48 63 ff b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 63 63 2c 00 f7 d8 64 89 02 48
RSP: 002b:00007fffef94b7f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000004000 RCX: 00007f0bc5ffbafd
RDX: 0000000000004000 RSI: 00000000017e5420 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000017e51d0 R14: 0000000000000010 R15: 0000000000000006
Modules linked in: act_police veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_blk virtio_net virtio_console net_failover failover crc32c_intel ata_piix libata serio_raw virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_police_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc filter add dev crash0 egress matchall \
> action pedit ex munge ip ttl set 10 pass index 90
# tc actions replace action pedit \
> ex munge ip ttl set 10 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action pedit
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: pedit action goto chain 42 keys 1
index 90 ref 2 bind 1
key #0 at ipv4+8: val 0a000000 mask 00ffffff
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff94a73db03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff94a6ee4c0700 RCX: 000000000000000a
RDX: 0000000000000000 RSI: ffff94a6ed22c800 RDI: 0000000000000000
RBP: ffff94a73db03c80 R08: ffff94a7386fa4c8 R09: ffff94a73229ea20
R10: 0000000000000000 R11: 0000000000000000 R12: ffff94a6ed22cb00
R13: ffff94a6ed22cb08 R14: 0000000000000001 R15: ffff94a6ed22c800
FS: 0000000000000000(0000) GS:ffff94a73db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007120e002 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 4e ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffab1740387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffb18184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000f168fa695f9a9 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_pedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep aesni_intel snd_hda_core crypto_simd snd_seq cryptd glue_helper snd_seq_device snd_pcm joydev snd_timer pcspkr virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper virtio_net net_failover syscopyarea sysfillrect sysimgblt failover virtio_blk fb_sys_fops virtio_console ttm drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_pedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action nat ingress 1.18.1.1 1.18.2.2 pass index 90
# tc actions replace action nat \
> ingress 1.18.1.1 1.18.2.2 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action nat
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: nat ingress 1.18.1.1/32 1.18.2.2 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d180067 P4D 800000002d180067 PUD 7cb8b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 164 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffae4500e2fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9fa52e28c800 RCX: 0000000001011201
RDX: 0000000000000000 RSI: 0000000000000056 RDI: ffff9fa52ca12800
RBP: ffffae4500e2fb70 R08: 0000000000000022 R09: 000000000000000e
R10: 00000000ffffffff R11: 0000000001011201 R12: ffff9fa52cbc9c00
R13: ffff9fa52cbc9c08 R14: 0000000000000001 R15: ffff9fa52ca12780
FS: 0000000000000000(0000) GS:ffff9fa57db80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073f8c004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_nat veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk net_failover failover virtio_console drm crc32c_intel floppy ata_piix libata virtio_pci virtio_ring virtio serio_raw dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_nat_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action connmark pass index 90
# tc actions replace action connmark \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action connmark
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: connmark zone 0 goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0
RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c
R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00
R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40
FS: 0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_connmark_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action mirred ingress mirror dev lo pass
# tc actions replace action mirred \
> ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action mirred
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: mirred (Ingress Mirror to device lo) goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
Mirror/redirect action on
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380
RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029
R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000
R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00
FS: 0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_mirred_init() proved to fix the
above issue. For the same reason, postpone the assignment of tcfa_action
and tcfm_eaction to avoid partial reconfiguration of a mirred rule when
it's replaced by another one that mirrors to a device that does not
exist. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action ife encode allow mark pass index 90
# tc actions replace action ife \
> encode allow mark goto chain 42 index 90 cookie c1a0c1a0
# tc action show action ife
had the following output:
IFE type 0xED3E
IFE type 0xED3E
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: ife encode action goto chain 42 type 0XED3E
allow mark
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700
R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800
FS: 0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ndisc_next_option+0x50/0x50
? ___neigh_create+0x4d5/0x680
? ip6_finish_output2+0x1b5/0x590
ip6_finish_output2+0x1b5/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.28+0x79/0xc0
ndisc_send_skb+0x248/0x2e0
ndisc_send_ns+0xf8/0x200
? addrconf_dad_work+0x389/0x4b0
addrconf_dad_work+0x389/0x4b0
? __switch_to_asm+0x34/0x70
? process_one_work+0x195/0x380
? addrconf_dad_completed+0x370/0x370
process_one_work+0x195/0x380
worker_thread+0x30/0x390
? process_one_work+0x380/0x380
kthread+0x113/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x35/0x40
Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife]
CR2: 0000000000000000
Validating the control action within tcf_ife_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action gact pass index 90
# tc actions replace action gact \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action gact
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: gact action goto chain 42
random type none pass val 0
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00
RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00
R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480
FS: 0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_secondary+0x1a7/0x200
secondary_startup_64+0xa4/0xb0
Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
CR2: 0000000000000000
Validating the control action within tcf_gact_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall action csum icmp pass index 90
# tc actions replace action csum icmp goto chain 42 index 90 \
> cookie c1a0c1a0
# tc actions show action csum
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: csum (icmp) action goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff93153da03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00
RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818
RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003
R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400
R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600
FS: 0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0
Call Trace:
<IRQ>
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip6_finish_output2+0x369/0x590
ip6_finish_output2+0x369/0x590
? ip6_output+0x68/0x110
ip6_output+0x68/0x110
? nf_hook.constprop.35+0x79/0xc0
mld_sendpack+0x16f/0x220
mld_ifc_timer_expire+0x195/0x2c0
? igmp6_timer_handler+0x70/0x70
call_timer_fn+0x2b/0x130
run_timer_softirq+0x3e8/0x440
? tick_sched_timer+0x37/0x70
__do_softirq+0xe3/0x2f5
irq_exit+0xf0/0x100
smp_apic_timer_interrupt+0x6c/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000
RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000
R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
? __sched_text_end+0x1/0x1
default_idle+0x1c/0x140
do_idle+0x1c4/0x280
cpu_startup_entry+0x19/0x20
start_kernel+0x49e/0x4be
secondary_startup_64+0xa4/0xb0
Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_csum_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the following script:
# tc filter add dev crash0 egress matchall \
> action bpf bytecode '1,6 0 0 4294967295' pass index 90
# tc actions replace action bpf \
> bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0
# tc action show action bpf
had the following output:
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1
action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42
index 90 ref 2 bind 1
cookie c1a0c1a0
Then, the first packet transmitted by crash0 made the kernel crash:
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00
RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00
R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00
FS: 00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0
Call Trace:
tcf_classify+0x58/0x120
__dev_queue_xmit+0x40a/0x890
? ip_finish_output2+0x16f/0x430
ip_finish_output2+0x16f/0x430
? ip_output+0x69/0xe0
ip_output+0x69/0xe0
? ip_forward_options+0x1a0/0x1a0
ip_send_skb+0x15/0x40
raw_sendmsg+0x8e1/0xbd0
? sched_clock+0x5/0x10
? sched_clock_cpu+0xc/0xa0
? try_to_wake_up+0x54/0x480
? ldsem_down_read+0x3f/0x280
? _cond_resched+0x15/0x40
? down_read+0xe/0x30
? copy_termios+0x1e/0x70
? tty_mode_ioctl+0x1b6/0x4c0
? sock_sendmsg+0x36/0x40
sock_sendmsg+0x36/0x40
__sys_sendto+0x10e/0x140
? do_vfs_ioctl+0xa4/0x640
? handle_mm_fault+0xdc/0x210
? syscall_trace_enter+0x1df/0x2e0
? __audit_syscall_exit+0x216/0x260
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f615f7e3c03
Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03
RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003
RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080
Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
Validating the control action within tcf_bpf_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- pass a pointer to struct tcf_proto in each actions's init() handler,
to allow validating the control action, checking whether the chain
exists and (eventually) refcounting it.
- remove code that validates the control action after a successful call
to the action's init() handler, and replace it with a test that forbids
addition of actions having 'goto_chain' and NULL goto_chain pointer at
the same time.
- add tcf_action_check_ctrlact(), that will validate the control action
and eventually allocate the action 'goto_chain' within the init()
handler.
- add tcf_action_set_ctrlact(), that will assign the control action and
swap the current 'goto_chain' pointer with the new given one.
This disallows 'goto_chain' on actions that don't initialize it properly
in their init() handler, i.e. calling tcf_action_check_ctrlact() after
successful IDR reservation and then calling tcf_action_set_ctrlact()
to assign 'goto_chain' and 'tcf_action' consistently.
By doing this, the kernel does not leak anymore refcounts when a valid
'goto chain' handle is replaced in TC actions, causing kmemleak splats
like the following one:
# tc chain add dev dd0 chain 42 ingress protocol ip flower \
> ip_proto tcp action drop
# tc chain add dev dd0 chain 43 ingress protocol ip flower \
> ip_proto udp action drop
# tc filter add dev dd0 ingress matchall \
> action gact goto chain 42 index 66
# tc filter replace dev dd0 ingress matchall \
> action gact goto chain 43 index 66
# echo scan >/sys/kernel/debug/kmemleak
<...>
unreferenced object 0xffff93c0ee09f000 (size 1024):
comm "tc", pid 2565, jiffies 4295339808 (age 65.426s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0
[<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0
[<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110
[<000000006126a348>] netlink_unicast+0x1a0/0x250
[<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0
[<00000000a25a2171>] sock_sendmsg+0x36/0x40
[<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0
[<00000000d0422042>] __sys_sendmsg+0x5e/0xa0
[<000000007a6c61f9>] do_syscall_64+0x5b/0x180
[<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<0000000013eaa334>] 0xffffffffffffffff
Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change addrconf_f6i_alloc to generate a fib6_config and call
ip6_route_info_create. addrconf_f6i_alloc is the last caller to
fib6_info_alloc besides ip6_route_info_create, and there is no
reason for it to do its own initialization on a fib6_info.
Host routes need to be created even if the device is down, so add a
new flag, fc_ignore_dev_down, to fib6_config and update fib6_nh_init
to not error out if device is not up.
Notes on the conversion:
- ip_fib_metrics_init is the same as fib6_config has fc_mx set to NULL
and fc_mx_len set to 0
- dst_nocount is handled by the RTF_ADDRCONF flag
- dst_host is handled by fc_dst_len = 128
nh_gw does not get set after the conversion to ip6_route_info_create
but it should not be set in addrconf_f6i_alloc since this is a host
route not a gateway route.
Everything else is a straight forward map between fib6_info and
fib6_config.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip6_route_info_create is a low level function for ensuring fc_metric is
set. Move the check and default setting to the 2 locations that do not
already set fc_metric before calling ip6_route_info_create. This is
required for the next patch which moves addrconf allocations to
ip6_route_info_create and want the metric for host routes to be 0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To free the skb in normal course of processing, consume_skb() should be
used. Only for failure paths, skb_free() is intended to be used.
https://www.kernel.org/doc/htmldocs/networking/API-consume-skb.html
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree:
1) Remove a direct dependency with IPv6 introduced by the
sip_external_media feature, from Alin Nastac.
2) Fix bogus ENOENT when removing interval elements from set.
3) Set transport_header from br_netfilter to mimic the stack
behaviour, this partially fixes a checksum validation bug
from the SCTP connection tracking, from Xin Long.
4) Fix undefined reference to symbol in xt_TEE, due to missing
Kconfig dependencies, from Arnd Bergmann.
5) Check for NULL in skb_header_pointer() calls in ip6t_shr,
from Kangjie Lu.
6) Fix bogus EBUSY when removing an existing conntrack helper from
a transaction.
7) Fix module autoload of the redirect extension.
8) Remove duplicated transition in flowtable diagram in the existing
documentation.
9) Missing .release_ops call from error path in newrule() which
results module refcount leak, from Taehee Yoo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit c55c8edafa91 ("tipc: smooth change between replicast and
broadcast") we introduced new method to eliminate the risk of message
reordering that happen in between different nodes.
Unfortunately, we forgot checking at receiving side to ignore intra node.
We fix this by checking and returning if arrived message from intra node.
syzbot report:
==================================================================
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 7820 Comm: syz-executor418 Not tainted 5.0.0+ #61
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
RIP: 0010:tipc_mcast_filter_msg+0x21b/0x13d0 net/tipc/bcast.c:782
Code: 45 c0 0f 84 39 06 00 00 48 89 5d 98 e8 ce ab a5 fa 49 8d bc
24 c8 00 00 00 48 b9 00 00 00 00 00 fc ff df 48 89 f8 48 c1 e8 03
<80> 3c 08 00 0f 85 9a 0e 00 00 49 8b 9c 24 c8 00 00 00 48 be 00 00
RSP: 0018:ffff8880959defc8 EFLAGS: 00010202
RAX: 0000000000000019 RBX: ffff888081258a48 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: ffffffff86cab862 RDI: 00000000000000c8
RBP: ffff8880959df030 R08: ffff8880813d0200 R09: ffffed1015d05bc8
R10: ffffed1015d05bc7 R11: ffff8880ae82de3b R12: 0000000000000000
R13: 000000000000002c R14: 0000000000000000 R15: ffff888081258a48
FS: 000000000106a880(0000) GS:ffff8880ae800000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020001cc0 CR3: 0000000094a20000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
tipc_sk_filter_rcv+0x182d/0x34f0 net/tipc/socket.c:2168
tipc_sk_enqueue net/tipc/socket.c:2254 [inline]
tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305
tipc_sk_mcast_rcv+0x724/0x1020 net/tipc/socket.c:1209
tipc_mcast_xmit+0x7fe/0x1200 net/tipc/bcast.c:410
tipc_sendmcast+0xb36/0xfc0 net/tipc/socket.c:820
__tipc_sendmsg+0x10df/0x18d0 net/tipc/socket.c:1358
tipc_sendmsg+0x53/0x80 net/tipc/socket.c:1291
sock_sendmsg_nosec net/socket.c:651 [inline]
sock_sendmsg+0xdd/0x130 net/socket.c:661
___sys_sendmsg+0x806/0x930 net/socket.c:2260
__sys_sendmsg+0x105/0x1d0 net/socket.c:2298
__do_sys_sendmsg net/socket.c:2307 [inline]
__se_sys_sendmsg net/socket.c:2305 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2305
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4401c9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8
48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05
<48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd887fa9d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9
RDX: 0000000000000000 RSI: 0000000020002140 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a50
R13: 0000000000401ae0 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace ba79875754e1708f ]---
Reported-by: syzbot+be4bdf2cc3e85e952c50@syzkaller.appspotmail.com
Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb free-ed in:
1/ condition 1: tipc_sk_filter_rcv -> tipc_sk_proto_rcv
2/ condition 2: tipc_sk_filter_rcv -> tipc_group_filter_msg
This leads to a "use-after-free" access in the next condition.
We fix this by intializing the variable at declaration, then it is safe
to check this variable to continue processing if condition matches.
syzbot report:
==================================================================
BUG: KASAN: use-after-free in tipc_sk_filter_rcv+0x2166/0x34f0
net/tipc/socket.c:2167
Read of size 4 at addr ffff88808ea58534 by task kworker/u4:0/7
CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.0.0+ #61
Hardware name: Google Google Compute Engine/Google Compute Engine,
BIOS Google 01/01/2011
Workqueue: tipc_send tipc_conn_send_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:131
tipc_sk_filter_rcv+0x2166/0x34f0 net/tipc/socket.c:2167
tipc_sk_enqueue net/tipc/socket.c:2254 [inline]
tipc_sk_rcv+0xc45/0x25a0 net/tipc/socket.c:2305
tipc_topsrv_kern_evt+0x3b7/0x580 net/tipc/topsrv.c:610
tipc_conn_send_to_sock+0x43e/0x5f0 net/tipc/topsrv.c:283
tipc_conn_send_work+0x65/0x80 net/tipc/topsrv.c:303
process_one_work+0x98e/0x1790 kernel/workqueue.c:2269
worker_thread+0x98/0xe40 kernel/workqueue.c:2415
kthread+0x357/0x430 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352
Reported-by: syzbot+e863893591cc7a622e40@syzkaller.appspotmail.com
Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In genl_register_family(), when idr_alloc() fails,
we forget to free the memory we possibly allocate for
family->attrbuf.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2ae0f17df1cd ("genetlink: use idr to track families")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When cancelling a subscription, we have to clear the cancel bit in the
request before iterating over any established subscriptions with memcmp.
Otherwise no subscription will ever be found, and it will not be
possible to explicitly unsubscribe individual subscriptions.
Fixes: 8985ecc7c1e0 ("tipc: simplify endianness handling in topology subscriber")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In addition to icmp_echo_ignore_multicast, there is a need to also
prevent responding to pings to anycast addresses for security.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the previous patch, all the callers of ndo_select_queue()
provide as a 'fallback' argument netdev_pick_tx.
The only exceptions are nested calls to ndo_select_queue(),
which pass down the 'fallback' available in the current scope
- still netdev_pick_tx.
We can drop such argument and replace fallback() invocation with
netdev_pick_tx(). This avoids an indirect call per xmit packet
in some scenarios (TCP syn, UDP unconnected, XDP generic, pktgen)
with device drivers implementing such ndo. It also clean the code
a bit.
Tested with ixgbe and CONFIG_FCOE=m
With pktgen using queue xmit:
threads vanilla patched
(kpps) (kpps)
1 2334 2428
2 4166 4278
4 7895 8100
v1 -> v2:
- rebased after helper's name change
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently packet_pick_tx_queue() is the only caller of
ndo_select_queue() using a fallback argument other than
netdev_pick_tx.
Leveraging rx queue, we can obtain a similar queue selection
behavior using core helpers. After this change, ndo_select_queue()
is always invoked with netdev_pick_tx() as fallback.
We can change ndo_select_queue() signature in a followup patch,
dropping an indirect call per transmitted packet in some scenarios
(e.g. TCP syn and XDP generic xmit)
This changes slightly how af packet queue selection happens when
PACKET_QDISC_BYPASS is set. It's now more similar to plan dev_queue_xmit()
tacking in account both XPS and TC mapping.
v1 -> v2:
- rebased after helper name change
RFC -> v1:
- initialize sender_cpu to the expected value
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the following patches, we are going to use __netdev_pick_tx() in
many modules. Rename it to netdev_pick_tx(), to make it clear is
a public API.
Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(),
to avoid name clashes.
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates
memory with addrs_size which is passed from userspace. We used flag
GFP_USER to put some more restrictions on it in Commit cacc06215271
("sctp: use GFP_USER for user-controlled kmalloc").
However, since Commit c981f254cc82 ("sctp: use vmemdup_user() rather
than badly open-coding memdup_user()"), vmemdup_user() has been used,
which doesn't check GFP_USER flag when goes to vmalloc_*(). So when
addrs_size is a huge value, it could exhaust memory and even trigger
oom killer.
This patch is to use memdup_user() instead, in which GFP_USER would
work to limit the memory allocation with a huge addrs_size.
Note we can't fix it by limiting 'addrs_size', as there's no demand
for it from RFC.
Reported-by: syzbot+ec1b7575afef85a0e5ca@syzkaller.appspotmail.com
Fixes: c981f254cc82 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jianlin reported a crash:
[ 381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
[ 381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160
[ 382.009615] Call Trace:
[ 382.020762] <IRQ>
[ 382.030174] ip6_route_redirect.isra.52+0xc9/0xf0
[ 382.050984] ip6_redirect+0xb6/0xf0
[ 382.066731] icmpv6_notify+0xca/0x190
[ 382.083185] ndisc_redirect_rcv+0x10f/0x160
[ 382.102569] ndisc_rcv+0xfb/0x100
[ 382.117725] icmpv6_rcv+0x3f2/0x520
[ 382.133637] ip6_input_finish+0xbf/0x460
[ 382.151634] ip6_input+0x3b/0xb0
[ 382.166097] ipv6_rcv+0x378/0x4e0
It was caused by the lookup function __ip6_route_redirect() returns NULL in
fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL.
So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry
instead of NULL.
v1->v2:
- move down 'fallback:' to make it more readable.
Fixes: e873e4b9cc7e ("ipv6: use fib6_info_hold_safe() when necessary")
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to use eth_broadcast_addr() to assign broadcast address
insetad of memset().
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added support for AES128-CCM based record encryption. AES128-CCM is
similar to AES128-GCM. Both of them have same salt/iv/mac size. The
notable difference between the two is that while invoking AES128-CCM
operation, the salt||nonce (which is passed as IV) has to be prefixed
with a hardcoded value '2'. Further, CCM implementation in kernel
requires IV passed in crypto_aead_request() to be full '16' bytes.
Therefore, the record structure 'struct tls_rec' has been modified to
reserve '16' bytes for IV. This works for both GCM and CCM based cipher.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check")
one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller
found that that triggers a warning:
[ 21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0
[ 21.101490] Modules linked in:
[ 21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146
[ 21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[ 21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630
[ 21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3
[ 21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246
[ 21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000
[ 21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000
[ 21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67
[ 21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d
[ 21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d
[ 21.112552] FS: 00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000
[ 21.113612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0
[ 21.115367] Call Trace:
[ 21.115705] ? __alloc_pages_slowpath+0x21c0/0x21c0
[ 21.116362] alloc_pages_current+0xac/0x1e0
[ 21.116923] kmalloc_order+0x18/0x70
[ 21.117393] kmalloc_order_trace+0x18/0x110
[ 21.117949] packet_set_ring+0x9d5/0x1770
[ 21.118524] ? packet_rcv_spkt+0x440/0x440
[ 21.119094] ? lock_downgrade+0x620/0x620
[ 21.119646] ? __might_fault+0x177/0x1b0
[ 21.120177] packet_setsockopt+0x981/0x2940
[ 21.120753] ? __fget+0x2fb/0x4b0
[ 21.121209] ? packet_release+0xab0/0xab0
[ 21.121740] ? sock_has_perm+0x1cd/0x260
[ 21.122297] ? selinux_secmark_relabel_packet+0xd0/0xd0
[ 21.123013] ? __fget+0x324/0x4b0
[ 21.123451] ? selinux_netlbl_socket_setsockopt+0x101/0x320
[ 21.124186] ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0
[ 21.124908] ? __lock_acquire+0x529/0x3200
[ 21.125453] ? selinux_socket_setsockopt+0x5d/0x70
[ 21.126075] ? __sys_setsockopt+0x131/0x210
[ 21.126533] ? packet_release+0xab0/0xab0
[ 21.127004] __sys_setsockopt+0x131/0x210
[ 21.127449] ? kernel_accept+0x2f0/0x2f0
[ 21.127911] ? ret_from_fork+0x8/0x50
[ 21.128313] ? do_raw_spin_lock+0x11b/0x280
[ 21.128800] __x64_sys_setsockopt+0xba/0x150
[ 21.129271] ? lockdep_hardirqs_on+0x37f/0x560
[ 21.129769] do_syscall_64+0x9f/0x450
[ 21.130182] entry_SYSCALL_64_after_hwframe+0x49/0xbe
We should allocate with __GFP_NOWARN to handle this.
Cc: Kal Conley <kal.conley@dectris.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes: fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed. This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.
Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.
Cc: stable@vger.kernel.org
Fixes: 6305a3b41515 ("libceph: support for blacklisting clients")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
|
|
->release_ops() callback releases resources and this is used in error path.
If nf_tables_newrule() fails after ->select_ops(), it should release
resources. but it can not call ->destroy() because that should be called
after ->init().
At this point, ->release_ops() should be used for releasing resources.
Test commands:
modprobe -rv xt_tcpudp
iptables-nft -I INPUT -m tcp <-- error command
lsmod
Result:
Module Size Used by
xt_tcpudp 20480 2 <-- it should be 0
Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6
nexthop to connect IPv6 islands over IPv4 only MPLS network core.
Prior to this fix, to find the link-layer destination mac address, 6PE
enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6
nexthop address over the interface facing the IPv4 only core which
wouldn't success as the core is IPv6 free.
This fix changes that behavior on 6PE host to treat the nexthop as IPv4
address and send ARP requests whenever the next-hop address is an
IPv4-mapped IPv6 address.
Below topology illustrates the issue and how the patch addresses it.
abcd::1.1.1.1 (lo) abcd::2.2.2.2 (lo)
R0 (PE/host)------------------------R1--------------------------------R2 (PE/host)
<--- IPv4 MPLS core ---> <------ IPv4 MPLS core -------->
eth1 eth2 eth3 eth4
172.18.0.10 172.18.0.11 172.19.0.11 172.19.0.12
ffff::172.18.0.10 ffff::172.19.0.12
<------------------IPv6 MPLS tunnel ---------------------->
R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels
between R0,R1 and R1,R2.
docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1
docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4
docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3
docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2
With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2,
using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for
172.18.18.0.11.
Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net>
Tested-by: Avinash Lingala <ar977m@att.com>
Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPv4 has icmp_echo_ignore_broadcast to prevent responding to broadcast pings.
IPv6 needs a similar mechanism.
v1->v2:
- Remove NET_IPV6_ICMP_ECHO_IGNORE_MULTICAST.
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the request socket is created locally, it'd make more sense to
use reqsk_free() instead of reqsk_put() in TFO and syncookies' error
path.
However, tcp_get_cookie_sock() may set ->rsk_refcnt before freeing the
socket; tcp_conn_request() may also have non-null ->rsk_refcnt because
of tcp_try_fastopen(). In both cases 'req' hasn't been exposed
to the outside world and is safe to free immediately, but that'd
trigger the WARN_ON_ONCE in reqsk_free().
Define __reqsk_free() for these situations where we know nobody's
referencing the socket, even though ->rsk_refcnt might be non-null.
Now we can consolidate the error path of tcp_get_cookie_sock() and
tcp_conn_request().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix sparse warning:
net/core/datagram.c:411:5: warning:
symbol '__skb_datagram_iter' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP ipv6 fast path dereferences a pointer to get to the inet6
part of a tcp socket, but given the fixed memory placement,
we can do better and avoid a possible cache line miss.
This also reduces register pressure, since we let the compiler
know about this memory placement.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a dual stack dccp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or
inet6_iif() helper.
Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a dual stack tcp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or tcp_v6_iif() helper.
Fixes: 1397ed35f22d ("ipv6: add flowinfo for tcp6 pkt_options for all cases")
Fixes: df3687ffc665 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, a multicast stream may start out using replicast, because
there are few destinations, and then it should ideally switch to
L2/broadcast IGMP/multicast when the number of destinations grows beyond
a certain limit. The opposite should happen when the number decreases
below the limit.
To eliminate the risk of message reordering caused by method change,
a sending socket must stick to a previously selected method until it
enters an idle period of 5 seconds. Means there is a 5 seconds pause
in the traffic from the sender socket.
If the sender never makes such a pause, the method will never change,
and transmission may become very inefficient as the cluster grows.
With this commit, we allow such a switch between replicast and
broadcast without any need for a traffic pause.
Solution is to send a dummy message with only the header, also with
the SYN bit set, via broadcast or replicast. For the data message,
the SYN bit is set and sending via replicast or broadcast (inverse
method with dummy).
Then, at receiving side any messages follow first SYN bit message
(data or dummy message), they will be held in deferred queue until
another pair (dummy or data message) arrived in other link.
v2: reverse christmas tree declaration
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As a preparation for introducing a smooth switching between replicast
and broadcast method for multicast message, We have to introduce a new
capability flag TIPC_MCAST_RBCTL to handle this new feature.
During a cluster upgrade a node can come back with this new capabilities
which also must be reflected in the cluster capabilities field.
The new feature is only applicable if all node in the cluster supports
this new capability.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, a multicast stream uses either broadcast or replicast as
transmission method, based on the ratio between number of actual
destinations nodes and cluster size.
However, when an L2 interface (e.g., VXLAN) provides pseudo
broadcast support, this becomes very inefficient, as it blindly
replicates multicast packets to all cluster/subnet nodes,
irrespective of whether they host actual target sockets or not.
The TIPC multicast algorithm is able to distinguish real destination
nodes from other nodes, and hence provides a smarter and more
efficient method for transferring multicast messages than
pseudo broadcast can do.
Because of this, we now make it possible for users to force
the broadcast link to permanently switch to using replicast,
irrespective of which capabilities the bearer provides,
or pretend to provide.
Conversely, we also make it possible to force the broadcast link
to always use true broadcast. While maybe less useful in
deployed systems, this may at least be useful for testing the
broadcast algorithm in small clusters.
We retain the current AUTOSELECT ability, i.e., to let the broadcast link
automatically select which algorithm to use, and to switch back and forth
between broadcast and replicast as the ratio between destination
node number and cluster size changes. This remains the default method.
Furthermore, we make it possible to configure the threshold ratio for
such switches. The default ratio is now set to 10%, down from 25% in the
earlier implementation.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of kmemdup failure while setting the service name the patch
returns -ENOMEM upstream for processing.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In netdev_queue_add_kobject and rx_queue_add_kobject,
if sysfs_create_group failed, kobject_put will call
netdev_queue_release to decrease dev refcont, however
dev_hold has not be called. So we will see this while
unregistering dev:
unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d0d668371679 ("net: don't decrement kobj reference count on init failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sockopt
A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt.
Fixes: 7efba10d6bd2 ("sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
