summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-07-16nl80211: allow 5 and 10 MHz channels for IBSSSimon Wunderlich
Whether the wiphy supports it or not is already checked, so what is left is to enable these channel types. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: return if IBSS chandef can not be usedSimon Wunderlich
This was originally designed to fail when a 40+/40- mode can not be used, but basic modes (such as 5/10/20 MHz) must be handled with an error. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: allow scanning for 5/10 MHz channels in IBSSSimon Wunderlich
Use a chandef instead of just the channel for scanning, and enable 5/10 Mhz scanning for IBSS mode. Also reporting is changed to the new inform_bss functions. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/mac80211: use reduced txpower for 5 and 10 MHzSimon Wunderlich
Some regulations (like germany, but also FCC) express their transmission power limit in dBm/MHz or mW/MHz. To cope with that and be on the safe side, reduce the maximum power to half (10 MHz) or quarter (5 MHz) when operating on these reduced bandwidth channels. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/mac80211: get mandatory rates based on scan widthSimon Wunderlich
Mandatory rates for 5 and 10 MHz are different from the rates used for 20 MHz in 2.4 GHz mode, as they use OFDM only. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: select and adjust bitrates according to channel modeSimon Wunderlich
The various components accessing the bitrates table must use consider the used channel bandwidth to select only available rates or calculate the bitrate correctly. There are some rates in reduced bandwidth modes which can't be represented as multiples of 500kbps, like 2.25 MBit/s in 5 MHz mode. The standard suggests to round up to the next multiple of 500kbps, just do that in mac80211 as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [make rate unsigned in ieee80211_add_tx_radiotap_header(), squash fix] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: add radiotap flag and handling for 5/10 MHzSimon Wunderlich
Wireshark already defines radiotap channel flags for 5 and 10 MHz, so just use them in Linux radiotap too. Furthermore, add rx status flags to allow drivers to report when they received data on 5 or 10 MHz channels. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix timing for 5 MHz and 10 MHz channelsSimon Wunderlich
according to IEEE 802.11-2012 section 18, various timings change when using 5 MHz and 10 MHz. Reflect this by using a "shift" when calculating durations. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211/rc80211: add chandef to rate initializationSimon Wunderlich
5 and 10 MHz support needs to know the current operating channel width, add the chandef to the rate control API. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: add scan width to bss and scan request structsSimon Wunderlich
To allow scanning and working with 5 MHz and 10 MHz BSS, extend the inform bss commands and add wrappers to take 5 and 10 MHz bss into account. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/nl80211: Add packet coalesce supportAmitkumar Karwar
In most cases, host that receives IPv4 and IPv6 multicast/broadcast packets does not do anything with these packets. Therefore the reception of these unwanted packets causes unnecessary processing and power consumption. Packet coalesce feature helps to reduce number of received interrupts to host by buffering these packets in firmware/hardware for some predefined time. Received interrupt will be generated when one of the following events occur. a) Expiration of hardware timer whose expiration time is set to maximum coalescing delay of matching coalesce rule. b) Coalescing buffer in hardware reaches it's limit. c) Packet doesn't match any of the configured coalesce rules. This patch adds set/get configuration support for packet coalesce. User needs to configure following parameters for creating a coalesce rule. a) Maximum coalescing delay b) List of packet patterns which needs to be matched c) Condition for coalescence. pattern 'match' or 'no match' Multiple such rules can be created. This feature needs to be advertised during driver initialization. Drivers are supposed to do required firmware/hardware settings based on user configuration. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> [fix kernel-doc, change free function, fix copy/paste error] Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: add per-chain signal information to radiotapJohannes Berg
When per-chain signal information is available, don't add the antenna field once but instead add a radiotap namespace for each chain containing the chain/antenna number and the signal strength on that chain. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: enable HT overrides for ibssSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: enable HT overrides for ibssSimon Wunderlich
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16cfg80211/nl80211: rename packet pattern related structures and enumsAmitkumar Karwar
Currently packet patterns and it's enum/structures are used only for WoWLAN feature. As we intend to reuse them for new feature packet coalesce, they are renamed in this patch. Older names are kept for backward compatibility purpose. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix duplicate retransmission detectionJohannes Berg
The duplicate retransmission detection code in mac80211 erroneously attempts to do the check for every frame, even frames that don't have a sequence control field or that don't use it (QoS-Null frames.) This is problematic because it causes the code to access data beyond the end of the SKB and depending on the data there will drop packets erroneously. Correct the code to not do duplicate detection for such frames. I found this error while testing AP powersave, it lead to retransmitted PS-Poll frames being dropped entirely as the data beyond the end of the SKB was always zero. Cc: stable@vger.kernel.org [all versions] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16nl80211: fix the setting of RSSI threshold value for meshChun-Yeow Yeoh
RSSI threshold value used for mesh peering should be in negative value. After range checks to mesh parameters is introduced, this is not allowed. Fix this. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211: fix ethtool stats for non-station interfacesJohannes Berg
As reported in https://bugzilla.kernel.org/show_bug.cgi?id=60514, the station loop never initialises 'sinfo' and therefore adds up a stack values, leaking stack information (the number of times it adds values is easily obtained another way.) Fix this by initialising the sinfo for each station to add. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16mac80211/minstrel_ht: fix cck rate samplingFelix Fietkau
The CCK group needs special treatment to set the right flags and rate index. Add this missing check to prevent setting broken rates for tx packets. Cc: stable@vger.kernel.org # 3.10 Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16regulatory: add missing rtnl lockingJohannes Berg
restore_regulatory_settings() requires the RTNL to be held, add the missing locking in reg_timeout_work(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16cfg80211: fix bugs in new SME implementationJohannes Berg
When splitting the SME implementation from the MLME code, I introduced a few bugs: * association failures no longer sent a connect-failure event * getting disassociated from the AP caused deauth to be sent but state wasn't cleaned up, leading to warnings * authentication failures weren't cleaned up properly, causing new connection attempts to warn and fail Fix these bugs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16nl80211: fix mgmt tx status and testmode reporting for netnsMichal Kazior
These two events were sent to the default network namespace. This caused AP mode in a non-default netns to not work correctly. Mgmt tx status was multicasted to a different (default) netns instead of the one the AP was in. Cc: stable@vger.kernel.org Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-15svcrdma: underflow issue in decode_write_list()Dan Carpenter
My static checker marks everything from ntohl() as untrusted and it complains we could have an underflow problem doing: return (u32 *)&ary->wc_array[nchunks]; Also on 32 bit systems the upper bound check could overflow. Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2013-07-15SUNRPC: Fix another issue with rpc_client_register()Trond Myklebust
Fix the error pathway if rpcauth_create() fails. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-07-15netfilter: xt_socket: fix broken v0 supportEric Dumazet
commit 681f130f39e10 ("netfilter: xt_socket: add XT_SOCKET_NOWILDCARD flag") added a potential NULL dereference if an old iptables package uses v0 of the match. Fix this by removing the test on @info in fast path. IPv6 can remove the test as well, as it uses v1 or v2. Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-07-15netfilter: ctnetlink: fix incorrect NAT expectation dumpingPablo Neira Ayuso
nf_ct_expect_alloc leaves unset the expectation NAT fields. However, ctnetlink_exp_dump_expect expects them to be zeroed in case they are not used, which may not be the case. This results in dumping the NAT tuple of the expectation when it should not. Fix it by zeroing the NAT fields of the expectation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-14net: delete __cpuinit usage from all net filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the net/* uses of the __cpuinit macros from all C files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs stuff from Al Viro: "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including making simple_lookup() usable for filesystems with non-NULL s_d_op, which allows us to get rid of quite a bit of ugliness" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sunrpc: now we can just set ->s_d_op cgroup: we can use simple_lookup() now efivarfs: we can use simple_lookup() now make simple_lookup() usable for filesystems that set ->s_d_op configfs: don't open-code d_alloc_name() __rpc_lookup_create_exclusive: pass string instead of qstr rpc_create_*_dir: don't bother with qstr llist: llist_add() can use llist_add_batch() llist: fix/simplify llist_add() and llist_add_batch() fput: turn "list_head delayed_fput_list" into llist_head fs/file_table.c:fput(): add comment Safer ABI for O_TMPFILE
2013-07-14sunrpc: now we can just set ->s_d_opAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14__rpc_lookup_create_exclusive: pass string instead of qstrAl Viro
... and use d_hash_and_lookup() instead of open-coding it, for fsck sake... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-14rpc_create_*_dir: don't bother with qstrAl Viro
just pass the name Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Just a bunch of small fixes and tidy ups: 1) Finish the "busy_poll" renames, from Eliezer Tamir. 2) Fix RCU stalls in IFB driver, from Ding Tianhong. 3) Linearize buffers properly in tun/macvtap zerocopy code. 4) Don't crash on rmmod in vxlan, from Pravin B Shelar. 5) Spinlock used before init in alx driver, from Maarten Lankhorst. 6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry Kravkov. 7) Dummy and ifb driver load failure paths can oops, fixes from Tan Xiaojun and Ding Tianhong. 8) Correct MTU calculations in IP tunnels, from Alexander Duyck. 9) Account all TCP retransmits in SNMP stats properly, from Yuchung Cheng. 10) atl1e and via-rhine do not handle DMA mapping failures properly, from Neil Horman. 11) Various equal-cost multipath route fixes in ipv6 from Hannes Frederic Sowa" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ipv6: only static routes qualify for equal cost multipathing via-rhine: fix dma mapping errors atl1e: fix dma mapping warnings tcp: account all retransmit failures usb/net/r815x: fix cast to restricted __le32 usb/net/r8152: fix integer overflow in expression net: access page->private by using page_private net: strict_strtoul is obsolete, use kstrtoul instead drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe net/usb: add relative mii functions for r815x net/tipc: use %*phC to dump small buffers in hex form qlcnic: Adding Maintainers. gre: Fix MTU sizing check for gretap tunnels pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts pkt_sched: sch_qfq: improve efficiency of make_eligible gso: Update tunnel segmentation to support Tx checksum offload inet: fix spacing in assignment ifb: fix oops when loading the ifb failed ...
2013-07-12ipv6: only static routes qualify for equal cost multipathingHannes Frederic Sowa
Static routes in this case are non-expiring routes which did not get configured by autoconf or by icmpv6 redirects. To make sure we actually get an ecmp route while searching for the first one in this fib6_node's leafs, also make sure it matches the ecmp route assumptions. v2: a) Removed RTF_EXPIRE check in dst.from chain. The check of RTF_ADDRCONF already ensures that this route, even if added again without RTF_EXPIRES (in case of a RA announcement with infinite timeout), does not cause the rt6i_nsiblings logic to go wrong if a later RA updates the expiration time later. v3: a) Allow RTF_EXPIRES routes to enter the ecmp route set. We have to do so, because an pmtu event could update the RTF_EXPIRES flag and we would not count this route, if another route joins this set. We now filter only for RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC, which are flags that don't get changed after rt6_info construction. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12tcp: account all retransmit failuresYuchung Cheng
Change snmp RETRANSFAILS stat to include timeout retransmit failures in addition to other loss recoveries. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12net: access page->private by using page_privateSunghan Suh
Signed-off-by: Sunghan Suh <sunghan.suh@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12net: strict_strtoul is obsolete, use kstrtoul instead“Cosmin
patch found using checkpatch.pl Signed-off-by: Cosmin Stanescu <cosmin90stanescu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11net/tipc: use %*phC to dump small buffers in hex formAndy Shevchenko
Instead of passing each byte by stack let's use nice specifier for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11gre: Fix MTU sizing check for gretap tunnelsAlexander Duyck
This change fixes an MTU sizing issue seen with gretap tunnels when non-gso packets are sent from the interface. In my case I was able to reproduce the issue by simply sending a ping of 1421 bytes with the gretap interface created on a device with a standard 1500 mtu. This fix is based on the fact that the tunnel mtu is already adjusted by dev->hard_header_len so it would make sense that any packets being compared against that mtu should also be adjusted by hard_header_len and the tunnel header instead of just the tunnel header. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: Cong Wang <amwang@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_tsPaolo Valente
This patch removes the forward declaration of qfq_update_agg_ts, by moving the definition of the function above its first call. This patch also removes a useless forward declaration of qfq_schedule_agg. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11pkt_sched: sch_qfq: improve efficiency of make_eligiblePaolo Valente
In make_eligible, a mask is used to decide which groups must become eligible: the i-th group becomes eligible only if the i-th bit of the mask (from the right) is set. The mask is computed by left-shifting a 1 by a given number of places, and decrementing the result. The shift is performed on a ULL to avoid problems in case the number of places to shift is higher than 31. On a 32-bit machine, this is more costly than working on an UL. This patch replaces such a costly operation with two cheaper branches. The trick is based on the following fact: in case of a shift of at least 32 places, the resulting mask has at least the 32 less significant bits set, whereas the total number of groups is lower than 32. As a consequence, in this case it is enough to just set the 32 less significant bits of the mask with a cheaper ~0UL. In the other case, the shift can be safely performed on a UL. Reported-by: David S. Miller <davem@davemloft.net> Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11gso: Update tunnel segmentation to support Tx checksum offloadAlexander Duyck
This change makes it so that the GRE and VXLAN tunnels can make use of Tx checksum offload support provided by some drivers via the hw_enc_features. Without this fix enabling GSO means sacrificing Tx checksum offload and this actually leads to a performance regression as shown below: Utilization Send Throughput local GSO 10^6bits/s % S state 6276.51 8.39 enabled 7123.52 8.42 disabled To resolve this it was necessary to address two items. First netif_skb_features needed to be updated so that it would correctly handle the Trans Ether Bridging protocol without impacting the need to check for Q-in-Q tagging. To do this it was necessary to update harmonize_features so that it used skb_network_protocol instead of just using the outer protocol. Second it was necessary to update the GRE and UDP tunnel segmentation offloads so that they would reset the encapsulation bit and inner header offsets after the offload was complete. As a result of this change I have seen the following results on a interface with Tx checksum enabled for encapsulated frames: Utilization Send Throughput local GSO 10^6bits/s % S state 7123.52 8.42 disabled 8321.75 5.43 enabled v2: Instead of replacing refrence to skb->protocol with skb_network_protocol just replace the protocol reference in harmonize_features to allow for double VLAN tag checks. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11Merge tag 'nfs-for-3.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull second set of NFS client updates from Trond Myklebust: "This mainly contains some small readdir optimisations that had dependencies on Al Viro's readdir rewrite. There is also a fix for a nasty deadlock which surfaced earlier in this merge window. Highlights include: - Fix an_rpc pipefs regression that causes a deadlock on mount - Readdir optimisations by Scott Mayhew and Jeff Layton - clean up the rpc_pipefs dentry operation setup" * tag 'nfs-for-3.11-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix a deadlock in rpc_client_register() rpc_pipe: rpc_dir_inode_operations can be static NFS: Allow nfs_updatepage to extend a write under additional circumstances NFS: Make nfs_readdir revalidate less often NFS: Make nfs_attribute_cache_expired() non-static rpc_pipe: set dentry operations at d_alloc time nfs: set verifier on existing dentries in nfs_prime_dcache
2013-07-11inet: fix spacing in assignmentCamelia Groza
Found using checkpatch.pl Signed-off-by: Camelia Groza <camelia.groza@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11ipv6: fix route selection if kernel is not compiled with CONFIG_IPV6_ROUTER_PREFHannes Frederic Sowa
This is a follow-up patch to 3630d40067a21d4dfbadc6002bb469ce26ac5d52 ("ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available"). Since the removal of rt->n in rt6_info we can end up with a dst == NULL in rt6_check_neigh. In case the kernel is not compiled with CONFIG_IPV6_ROUTER_PREF we should also select a route with unkown NUD state but we must not avoid doing round robin selection on routes with the same target. So introduce and pass down a boolean ``do_rr'' to indicate when we should update rt->rr_ptr. As soon as no route is valid we do backtracking and do a lookup on a higher level in the fib trie. v2: a) Improved rt6_check_neigh logic (no need to create neighbour there) and documented return values. v3: a) Introduce enum rt6_nud_state to get rid of the magic numbers (thanks to David Miller). b) Update and shorten commit message a bit to actualy reflect the source. Reported-by: Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-119p: fix off by one causing access violations and memory corruptionSasha Levin
p9_release_pages() would attempt to dereference one value past the end of pages[]. This would cause the following crashes: [ 6293.171817] BUG: unable to handle kernel paging request at ffff8807c96f3000 [ 6293.174146] IP: [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.176447] PGD 79c5067 PUD 82c1e3067 PMD 82c197067 PTE 80000007c96f3060 [ 6293.180060] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 6293.180060] Modules linked in: [ 6293.180060] CPU: 62 PID: 174043 Comm: modprobe Tainted: G W 3.10.0-next-20130710-sasha #3954 [ 6293.180060] task: ffff8807b803b000 ti: ffff880787dde000 task.ti: ffff880787dde000 [ 6293.180060] RIP: 0010:[<ffffffff8412793b>] [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.214316] RSP: 0000:ffff880787ddfc28 EFLAGS: 00010202 [ 6293.214316] RAX: 0000000000000001 RBX: ffff8807c96f2ff8 RCX: 0000000000000000 [ 6293.222017] RDX: ffff8807b803b000 RSI: 0000000000000001 RDI: ffffea001c7e3d40 [ 6293.222017] RBP: ffff880787ddfc48 R08: 0000000000000000 R09: 0000000000000000 [ 6293.222017] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001 [ 6293.222017] R13: 0000000000000001 R14: ffff8807cc50c070 R15: ffff8807cc50c070 [ 6293.222017] FS: 00007f572641d700(0000) GS:ffff8807f3600000(0000) knlGS:0000000000000000 [ 6293.256784] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6293.256784] CR2: ffff8807c96f3000 CR3: 00000007c8e81000 CR4: 00000000000006e0 [ 6293.256784] Stack: [ 6293.256784] ffff880787ddfcc8 ffff880787ddfcc8 0000000000000000 ffff880787ddfcc8 [ 6293.256784] ffff880787ddfd48 ffffffff84128be8 ffff880700000002 0000000000000001 [ 6293.256784] ffff8807b803b000 ffff880787ddfce0 0000100000000000 0000000000000000 [ 6293.256784] Call Trace: [ 6293.256784] [<ffffffff84128be8>] p9_virtio_zc_request+0x598/0x630 [ 6293.256784] [<ffffffff8115c610>] ? wake_up_bit+0x40/0x40 [ 6293.256784] [<ffffffff841209b1>] p9_client_zc_rpc+0x111/0x3a0 [ 6293.256784] [<ffffffff81174b78>] ? sched_clock_cpu+0x108/0x120 [ 6293.256784] [<ffffffff84122a21>] p9_client_read+0xe1/0x2c0 [ 6293.256784] [<ffffffff81708a90>] v9fs_file_read+0x90/0xc0 [ 6293.256784] [<ffffffff812bd073>] vfs_read+0xc3/0x130 [ 6293.256784] [<ffffffff811a78bd>] ? trace_hardirqs_on+0xd/0x10 [ 6293.256784] [<ffffffff812bd5a2>] SyS_read+0x62/0xa0 [ 6293.256784] [<ffffffff841a1a00>] tracesys+0xdd/0xe2 [ 6293.256784] Code: 66 90 48 89 fb 41 89 f5 48 8b 3f 48 85 ff 74 29 85 f6 74 25 45 31 e4 66 0f 1f 84 00 00 00 00 00 e8 eb 14 12 fd 41 ff c4 49 63 c4 <48> 8b 3c c3 48 85 ff 74 05 45 39 e5 75 e7 48 83 c4 08 5b 41 5c [ 6293.256784] RIP [<ffffffff8412793b>] p9_release_pages+0x3b/0x60 [ 6293.256784] RSP <ffff880787ddfc28> [ 6293.256784] CR2: ffff8807c96f3000 [ 6293.256784] ---[ end trace 50822ee72cd360fc ]--- Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-11Merge tag 'for-linus-3.11-merge-window-part-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull second round of 9p patches from Eric Van Hensbergen: "Several of these patches were rebased in order to correct style issues. Only stylistic changes were made versus the patches which were in linux-next for two weeks. The rebases have been in linux-next for 3 days and have passed my regressions. The bulk of these are RDMA fixes and improvements. There's also some additions on the extended attributes front to support some additional namespaces and a new option for TCP to force allocation of mount requests from a priviledged port" * tag 'for-linus-3.11-merge-window-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Remove the unused variable "err" in v9fs_vfs_getattr() 9P: Add cancelled() to the transport functions. 9P/RDMA: count posted buffers without a pending request 9P/RDMA: Improve error handling in rdma_request 9P/RDMA: Do not free req->rc in error handling in rdma_request() 9P/RDMA: Use a semaphore to protect the RQ 9P/RDMA: Protect against duplicate replies 9P/RDMA: increase P9_RDMA_MAXSIZE to 1MB 9pnet: refactor struct p9_fcall alloc code 9P/RDMA: rdma_request() needs not allocate req->rc 9P: Fix fcall allocation for rdma fs/9p: xattr: add trusted and security namespaces net/9p: add privport option to 9p tcp transport
2013-07-11Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd changes from Bruce Fields: "Changes this time include: - 4.1 enabled on the server by default: the last 4.1-specific issues I know of are fixed, so we're not going to find the rest of the bugs without more exposure. - Experimental support for NFSv4.2 MAC Labeling (to allow running selinux over NFS), from Dave Quigley. - Fixes for some delicate cache/upcall races that could cause rare server hangs; thanks to Neil Brown and Bodo Stroesser for extreme debugging persistence. - Fixes for some bugs found at the recent NFS bakeathon, mostly v4 and v4.1-specific, but also a generic bug handling fragmented rpc calls" * 'for-3.11' of git://linux-nfs.org/~bfields/linux: (31 commits) nfsd4: support minorversion 1 by default nfsd4: allow destroy_session over destroyed session svcrpc: fix failures to handle -1 uid's sunrpc: Don't schedule an upcall on a replaced cache entry. net/sunrpc: xpt_auth_cache should be ignored when expired. sunrpc/cache: ensure items removed from cache do not have pending upcalls. sunrpc/cache: use cache_fresh_unlocked consistently and correctly. sunrpc/cache: remove races with queuing an upcall. nfsd4: return delegation immediately if lease fails nfsd4: do not throw away 4.1 lock state on last unlock nfsd4: delegation-based open reclaims should bypass permissions svcrpc: don't error out on small tcp fragment svcrpc: fix handling of too-short rpc's nfsd4: minor read_buf cleanup nfsd4: fix decoding of compounds across page boundaries nfsd4: clean up nfs4_open_delegation NFSD: Don't give out read delegations on creates nfsd4: allow client to send no cb_sec flavors nfsd4: fail attempts to request gss on the backchannel nfsd4: implement minimal SP4_MACH_CRED ...
2013-07-10ipv6: in case of link failure remove route directly instead of letting it expireHannes Frederic Sowa
We could end up expiring a route which is part of an ecmp route set. Doing so would invalidate the rt->rt6i_nsiblings calculations and could provoke the following panic: [ 80.144667] ------------[ cut here ]------------ [ 80.145172] kernel BUG at net/ipv6/ip6_fib.c:733! [ 80.145172] invalid opcode: 0000 [#1] SMP [ 80.145172] Modules linked in: 8021q nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables +snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer virtio_balloon snd soundcore i2c_piix4 i2c_core virtio_net virtio_blk [ 80.145172] CPU: 1 PID: 786 Comm: ping6 Not tainted 3.10.0+ #118 [ 80.145172] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 80.145172] task: ffff880117fa0000 ti: ffff880118770000 task.ti: ffff880118770000 [ 80.145172] RIP: 0010:[<ffffffff815f3b5d>] [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP: 0018:ffff880118771798 EFLAGS: 00010202 [ 80.145172] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011350e480 [ 80.145172] RDX: ffff88011350e238 RSI: 0000000000000004 RDI: ffff88011350f738 [ 80.145172] RBP: ffff880118771848 R08: ffff880117903280 R09: 0000000000000001 [ 80.145172] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011350f680 [ 80.145172] R13: ffff880117903280 R14: ffff880118771890 R15: ffff88011350ef90 [ 80.145172] FS: 00007f02b5127740(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 [ 80.145172] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 80.145172] CR2: 00007f981322a000 CR3: 00000001181b1000 CR4: 00000000000006e0 [ 80.145172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 80.145172] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 80.145172] Stack: [ 80.145172] 0000000000000001 ffff880100000000 ffff880100000000 ffff880117903280 [ 80.145172] 0000000000000000 ffff880119a4cf00 0000000000000400 00000000000007fa [ 80.145172] 0000000000000000 0000000000000000 0000000000000000 ffff88011350f680 [ 80.145172] Call Trace: [ 80.145172] [<ffffffff815eeceb>] ? rt6_bind_peer+0x4b/0x90 [ 80.145172] [<ffffffff815ed985>] __ip6_ins_rt+0x45/0x70 [ 80.145172] [<ffffffff815eee35>] ip6_ins_rt+0x35/0x40 [ 80.145172] [<ffffffff815ef1e4>] ip6_pol_route.isra.44+0x3a4/0x4b0 [ 80.145172] [<ffffffff815ef34a>] ip6_pol_route_output+0x2a/0x30 [ 80.145172] [<ffffffff81616077>] fib6_rule_action+0xd7/0x210 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff81553026>] fib_rules_lookup+0xc6/0x140 [ 80.145172] [<ffffffff81616374>] fib6_rule_lookup+0x44/0x80 [ 80.145172] [<ffffffff815ef320>] ? ip6_pol_route_input+0x30/0x30 [ 80.145172] [<ffffffff815edea3>] ip6_route_output+0x73/0xb0 [ 80.145172] [<ffffffff815dfdf3>] ip6_dst_lookup_tail+0x2c3/0x2e0 [ 80.145172] [<ffffffff813007b1>] ? list_del+0x11/0x40 [ 80.145172] [<ffffffff81082a4c>] ? remove_wait_queue+0x3c/0x50 [ 80.145172] [<ffffffff815dfe4d>] ip6_dst_lookup_flow+0x3d/0xa0 [ 80.145172] [<ffffffff815fda77>] rawv6_sendmsg+0x267/0xc20 [ 80.145172] [<ffffffff815a8a83>] inet_sendmsg+0x63/0xb0 [ 80.145172] [<ffffffff8128eb93>] ? selinux_socket_sendmsg+0x23/0x30 [ 80.145172] [<ffffffff815218d6>] sock_sendmsg+0xa6/0xd0 [ 80.145172] [<ffffffff81524a68>] SYSC_sendto+0x128/0x180 [ 80.145172] [<ffffffff8109825c>] ? update_curr+0xec/0x170 [ 80.145172] [<ffffffff81041d09>] ? kvm_clock_get_cycles+0x9/0x10 [ 80.145172] [<ffffffff810afd1e>] ? __getnstimeofday+0x3e/0xd0 [ 80.145172] [<ffffffff8152509e>] SyS_sendto+0xe/0x10 [ 80.145172] [<ffffffff8164efd9>] system_call_fastpath+0x16/0x1b [ 80.145172] Code: fe ff ff 41 f6 45 2a 06 0f 85 ca fe ff ff 49 8b 7e 08 4c 89 ee e8 94 ef ff ff e9 b9 fe ff ff 48 8b 82 28 05 00 00 e9 01 ff ff ff <0f> 0b 49 8b 54 24 30 0d 00 00 40 00 89 83 14 01 00 00 48 89 53 [ 80.145172] RIP [<ffffffff815f3b5d>] fib6_add+0x75d/0x830 [ 80.145172] RSP <ffff880118771798> [ 80.387413] ---[ end trace 02f20b7a8b81ed95 ]--- [ 80.390154] Kernel panic - not syncing: Fatal exception in interrupt Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10net: rename busy poll socket op and globalsEliezer Tamir
Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. a patch for the socket.7 man page will follow separately, because of limitations of my mail setup. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 21:34:33 +0000