| Age | Commit message (Collapse) | Author |
|---|
|
Previously the SNMP counter LINUX_MIB_TCPRETRANSFAIL is not counting
the TSO/GSO properly on failed retransmission. This patch fixes that.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously there is an off-by-one bug on determining when to abort
a stalled window-probing socket. This patch fixes that so it is
consistent with tcp_write_timeout().
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While introducing the DSA tagging protocol attribute, it was added to the DSA
slave network devices, but those actually see untagged traffic (that is their
whole purpose). Correct this mistake by putting the tagging sysfs attribute
under the DSA master network device where this is the information that we need.
While at it, also correct the sysfs documentation mistake that missed the
"dsa/" directory component of the attribute.
Fixes: 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when users set an invalid control action, kmemleak complains as follows:
# echo clear >/sys/kernel/debug/kmemleak
# ./tdc.py -e b48b
Test b48b: Add police action with exceed goto chain control action
All test results:
1..1
ok 1 - b48b # Add police action with exceed goto chain control action
about to flush the tap output if tests need to be skipped
done flushing skipped test tap output
# echo scan >/sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffa0fafbc3dde0 (size 96):
comm "tc", pid 2358, jiffies 4294922738 (age 17.022s)
hex dump (first 32 bytes):
2a 00 00 20 00 00 00 00 00 00 7d 00 00 00 00 00 *.. ......}.....
f8 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000648803d2>] tcf_action_init_1+0x384/0x4c0
[<00000000cb69382e>] tcf_action_init+0x12b/0x1a0
[<00000000847ef0d4>] tcf_action_add+0x73/0x170
[<0000000093656e14>] tc_ctl_action+0x122/0x160
[<0000000023c98e32>] rtnetlink_rcv_msg+0x263/0x2d0
[<000000003493ae9c>] netlink_rcv_skb+0x4d/0x130
[<00000000de63f8ba>] netlink_unicast+0x209/0x2d0
[<00000000c3da0ebe>] netlink_sendmsg+0x2c1/0x3c0
[<000000007a9e0753>] sock_sendmsg+0x33/0x40
[<00000000457c6d2e>] ___sys_sendmsg+0x2a0/0x2f0
[<00000000c5c6a086>] __sys_sendmsg+0x5e/0xa0
[<00000000446eafce>] do_syscall_64+0x5b/0x180
[<000000004aa871f2>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<00000000450c38ef>] 0xffffffffffffffff
change tcf_police_init() to avoid leaking 'new' in case TCA_POLICE_RESULT
contains TC_ACT_GOTO_CHAIN extended action.
Fixes: c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling mistake in a net_warn_ratelimited message, fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.
As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.
This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.
Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().
v1->v2:
- call sctp_assoc_update_frag_point() separately in sctp_process_init
and sctp_association_init, per Marcelo's suggestion.
Fixes: 2f5e3c9df693 ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: Jakub Audykowicz <jakub.audykowicz@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__qdisc_drop_all() accesses skb->prev to get to the tail of the
segment-list.
With commit 68d2f84a1368 ("net: gro: properly remove skb from list")
the skb-list handling has been changed to set skb->next to NULL and set
the list-poison on skb->prev.
With that change, __qdisc_drop_all() will panic when it tries to
dereference skb->prev.
Since commit 992cba7e276d ("net: Add and use skb_list_del_init().")
__list_del_entry is used, leaving skb->prev unchanged (thus,
pointing to the list-head if it's the first skb of the list).
This will make __qdisc_drop_all modify the next-pointer of the list-head
and result in a panic later on:
[ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI
[ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp #108
[ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90
[ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04
[ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202
[ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6
[ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038
[ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062
[ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000
[ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008
[ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000
[ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0
[ 34.514593] Call Trace:
[ 34.514893] <IRQ>
[ 34.515157] napi_gro_receive+0x93/0x150
[ 34.515632] receive_buf+0x893/0x3700
[ 34.516094] ? __netif_receive_skb+0x1f/0x1a0
[ 34.516629] ? virtnet_probe+0x1b40/0x1b40
[ 34.517153] ? __stable_node_chain+0x4d0/0x850
[ 34.517684] ? kfree+0x9a/0x180
[ 34.518067] ? __kasan_slab_free+0x171/0x190
[ 34.518582] ? detach_buf+0x1df/0x650
[ 34.519061] ? lapic_next_event+0x5a/0x90
[ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0
[ 34.520093] virtnet_poll+0x2df/0xd60
[ 34.520533] ? receive_buf+0x3700/0x3700
[ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140
[ 34.521631] ? htb_dequeue+0x1817/0x25f0
[ 34.522107] ? sch_direct_xmit+0x142/0xf30
[ 34.522595] ? virtqueue_napi_schedule+0x26/0x30
[ 34.523155] net_rx_action+0x2f6/0xc50
[ 34.523601] ? napi_complete_done+0x2f0/0x2f0
[ 34.524126] ? kasan_check_read+0x11/0x20
[ 34.524608] ? _raw_spin_lock+0x7d/0xd0
[ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0
[ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80
[ 34.526130] ? apic_ack_irq+0x9e/0xe0
[ 34.526567] __do_softirq+0x188/0x4b5
[ 34.527015] irq_exit+0x151/0x180
[ 34.527417] do_IRQ+0xdb/0x150
[ 34.527783] common_interrupt+0xf/0xf
[ 34.528223] </IRQ>
This patch makes sure that skb->prev is set to NULL when entering
netem_enqueue.
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 68d2f84a1368 ("net: gro: properly remove skb from list")
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a session in X25_STATE_1 (Awaiting Call Accept) receives a call
request, the session will be closed (x25_disconnect), cause=0x01
(Number Busy) and diag=0x48 (Call Collision) will be set and a clear
request will be send.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
o x25_find_listener(): the compare for the null_x25_address was wrong.
We have to check the x25_addr of the listener socket instead of the
x25_addr of the incomming call.
o x25_bind(): it was not possible to bind a socket to null_x25_address
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The length of the called and calling address was not calculated
correctly (BCD encoding).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 04157469b7b8 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.
First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.
Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.
This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().
This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
- both xps_needed and xps_rxqs_needed, in case of rxqs maps,
- only xps_needed, in case of CPU maps.
Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.
Fixes: 04157469b7b8 ("net: Use static_key for XPS maps")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before commit 80d19669ecd3 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.
Fixes: 80d19669ecd3 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no expression deactivation call from the rule replacement path,
hence, chain counter is not decremented. A few steps to reproduce the
problem:
%nft add table ip filter
%nft add chain ip filter c1
%nft add chain ip filter c1
%nft add rule ip filter c1 jump c2
%nft replace rule ip filter c1 handle 3 accept
%nft flush ruleset
<jump c2> expression means immediate NFT_JUMP to chain c2.
Reference count of chain c2 is increased when the rule is added.
When rule is deleted or replaced, the reference counter of c2 should be
decreased via nft_rule_expr_deactivate() which calls
nft_immediate_deactivate().
Splat looks like:
[ 214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[ 214.398983] Modules linked in: nf_tables nfnetlink
[ 214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44
[ 214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables]
[ 214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8
[ 214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202
[ 214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0
[ 214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78
[ 214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000
[ 214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba
[ 214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6
[ 214.398983] FS: 0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000
[ 214.398983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0
[ 214.398983] Call Trace:
[ 214.398983] ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables]
[ 214.398983] ? __kasan_slab_free+0x145/0x180
[ 214.398983] ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables]
[ 214.398983] ? kfree+0xdb/0x280
[ 214.398983] nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables]
[ ... ]
Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions")
Reported by: Christoph Anton Mitterer <calestyo@scientia.net>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We see the following lockdep warning:
[ 2284.078521] ======================================================
[ 2284.078604] WARNING: possible circular locking dependency detected
[ 2284.078604] 4.19.0+ #42 Tainted: G E
[ 2284.078604] ------------------------------------------------------
[ 2284.078604] rmmod/254 is trying to acquire lock:
[ 2284.078604] 00000000acd94e28 ((&n->timer)#2){+.-.}, at: del_timer_sync+0x5/0xa0
[ 2284.078604]
[ 2284.078604] but task is already holding lock:
[ 2284.078604] 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x190 [tipc]
[ 2284.078604]
[ 2284.078604] which lock already depends on the new lock.
[ 2284.078604]
[ 2284.078604]
[ 2284.078604] the existing dependency chain (in reverse order) is:
[ 2284.078604]
[ 2284.078604] -> #1 (&(&tn->node_list_lock)->rlock){+.-.}:
[ 2284.078604] tipc_node_timeout+0x20a/0x330 [tipc]
[ 2284.078604] call_timer_fn+0xa1/0x280
[ 2284.078604] run_timer_softirq+0x1f2/0x4d0
[ 2284.078604] __do_softirq+0xfc/0x413
[ 2284.078604] irq_exit+0xb5/0xc0
[ 2284.078604] smp_apic_timer_interrupt+0xac/0x210
[ 2284.078604] apic_timer_interrupt+0xf/0x20
[ 2284.078604] default_idle+0x1c/0x140
[ 2284.078604] do_idle+0x1bc/0x280
[ 2284.078604] cpu_startup_entry+0x19/0x20
[ 2284.078604] start_secondary+0x187/0x1c0
[ 2284.078604] secondary_startup_64+0xa4/0xb0
[ 2284.078604]
[ 2284.078604] -> #0 ((&n->timer)#2){+.-.}:
[ 2284.078604] del_timer_sync+0x34/0xa0
[ 2284.078604] tipc_node_delete+0x1a/0x40 [tipc]
[ 2284.078604] tipc_node_stop+0xcb/0x190 [tipc]
[ 2284.078604] tipc_net_stop+0x154/0x170 [tipc]
[ 2284.078604] tipc_exit_net+0x16/0x30 [tipc]
[ 2284.078604] ops_exit_list.isra.8+0x36/0x70
[ 2284.078604] unregister_pernet_operations+0x87/0xd0
[ 2284.078604] unregister_pernet_subsys+0x1d/0x30
[ 2284.078604] tipc_exit+0x11/0x6f2 [tipc]
[ 2284.078604] __x64_sys_delete_module+0x1df/0x240
[ 2284.078604] do_syscall_64+0x66/0x460
[ 2284.078604] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 2284.078604]
[ 2284.078604] other info that might help us debug this:
[ 2284.078604]
[ 2284.078604] Possible unsafe locking scenario:
[ 2284.078604]
[ 2284.078604] CPU0 CPU1
[ 2284.078604] ---- ----
[ 2284.078604] lock(&(&tn->node_list_lock)->rlock);
[ 2284.078604] lock((&n->timer)#2);
[ 2284.078604] lock(&(&tn->node_list_lock)->rlock);
[ 2284.078604] lock((&n->timer)#2);
[ 2284.078604]
[ 2284.078604] *** DEADLOCK ***
[ 2284.078604]
[ 2284.078604] 3 locks held by rmmod/254:
[ 2284.078604] #0: 000000003368be9b (pernet_ops_rwsem){+.+.}, at: unregister_pernet_subsys+0x15/0x30
[ 2284.078604] #1: 0000000046ed9c86 (rtnl_mutex){+.+.}, at: tipc_net_stop+0x144/0x170 [tipc]
[ 2284.078604] #2: 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x19
[...}
The reason is that the node timer handler sometimes needs to delete a
node which has been disconnected for too long. To do this, it grabs
the lock 'node_list_lock', which may at the same time be held by the
generic node cleanup function, tipc_node_stop(), during module removal.
Since the latter is calling del_timer_sync() inside the same lock, we
have a potential deadlock.
We fix this letting the timer cleanup function use spin_trylock()
instead of just spin_lock(), and when it fails to grab the lock it
just returns so that the timer handler can terminate its execution.
This is safe to do, since tipc_node_stop() anyway is about to
delete both the timer and the node instance.
Fixes: 6a939f365bdb ("tipc: Auto removal of peer down node instance")
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I changed to count sk_wmem_alloc by skb truesize instead of 1 to
fix the sk_wmem_alloc leak caused by later truesize's change in
xfrm in Commit 02968ccf0125 ("sctp: count sk_wmem_alloc by skb
truesize in sctp_packet_transmit").
But I should have also increased sk_wmem_alloc when head->truesize
is increased in sctp_packet_gso_append() as xfrm does. Otherwise,
sctp gso packet will cause sk_wmem_alloc underflow.
Fixes: 02968ccf0125 ("sctp: count sk_wmem_alloc by skb truesize in sctp_packet_transmit")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All lists that reach the tree_nodes_free() function have both zero
counter and true dead flag. The reason for this is that lists to be
release are selected by nf_conncount_gc_list() which already decrements
the list counter and sets on the dead flag. Therefore, this if statement
in tree_nodes_free() is unnecessary and wrong.
Fixes: 31568ec09ea0 ("netfilter: nf_conncount: fix list_del corruption in conn_free")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
There is a reference counter to ensure that masquerade modules register
notifiers only once. However, the existing reference counter approach is
not safe, test commands are:
while :
do
modprobe ip6t_MASQUERADE &
modprobe nft_masq_ipv6 &
modprobe -rv ip6t_MASQUERADE &
modprobe -rv nft_masq_ipv6 &
done
numbers below represent the reference counter.
--------------------------------------------------------
CPU0 CPU1 CPU2 CPU3 CPU4
[insmod] [insmod] [rmmod] [rmmod] [insmod]
--------------------------------------------------------
0->1
register 1->2
returns 2->1
returns 1->0
0->1
register <--
unregister
--------------------------------------------------------
The unregistation of CPU3 should be processed before the
registration of CPU4.
In order to fix this, use a mutex instead of reference counter.
splat looks like:
[ 323.869557] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [modprobe:1381]
[ 323.869574] Modules linked in: nf_tables(+) nf_nat_ipv6(-) nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 n]
[ 323.869574] irq event stamp: 194074
[ 323.898930] hardirqs last enabled at (194073): [<ffffffff90004a0d>] trace_hardirqs_on_thunk+0x1a/0x1c
[ 323.898930] hardirqs last disabled at (194074): [<ffffffff90004a29>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 323.898930] softirqs last enabled at (182132): [<ffffffff922006ec>] __do_softirq+0x6ec/0xa3b
[ 323.898930] softirqs last disabled at (182109): [<ffffffff90193426>] irq_exit+0x1a6/0x1e0
[ 323.898930] CPU: 0 PID: 1381 Comm: modprobe Not tainted 4.20.0-rc2+ #27
[ 323.898930] RIP: 0010:raw_notifier_chain_register+0xea/0x240
[ 323.898930] Code: 3c 03 0f 8e f2 00 00 00 44 3b 6b 10 7f 4d 49 bc 00 00 00 00 00 fc ff df eb 22 48 8d 7b 10 488
[ 323.898930] RSP: 0018:ffff888101597218 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
[ 323.898930] RAX: 0000000000000000 RBX: ffffffffc04361c0 RCX: 0000000000000000
[ 323.898930] RDX: 1ffffffff26132ae RSI: ffffffffc04aa3c0 RDI: ffffffffc04361d0
[ 323.898930] RBP: ffffffffc04361c8 R08: 0000000000000000 R09: 0000000000000001
[ 323.898930] R10: ffff8881015972b0 R11: fffffbfff26132c4 R12: dffffc0000000000
[ 323.898930] R13: 0000000000000000 R14: 1ffff110202b2e44 R15: ffffffffc04aa3c0
[ 323.898930] FS: 00007f813ed41540(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
[ 323.898930] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 323.898930] CR2: 0000559bf2c9f120 CR3: 000000010bc80000 CR4: 00000000001006f0
[ 323.898930] Call Trace:
[ 323.898930] ? atomic_notifier_chain_register+0x2d0/0x2d0
[ 323.898930] ? down_read+0x150/0x150
[ 323.898930] ? sched_clock_cpu+0x126/0x170
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] register_netdevice_notifier+0xbb/0x790
[ 323.898930] ? __dev_close_many+0x2d0/0x2d0
[ 323.898930] ? __mutex_unlock_slowpath+0x17f/0x740
[ 323.898930] ? wait_for_completion+0x710/0x710
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 323.898930] ? up_write+0x6c/0x210
[ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 324.127073] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables]
[ 324.127073] nft_chain_filter_init+0x1e/0xe8a [nf_tables]
[ 324.127073] nf_tables_module_init+0x37/0x92 [nf_tables]
[ ... ]
Fixes: 8dd33cc93ec9 ("netfilter: nf_nat: generalize IPv4 masquerading support for nf_tables")
Fixes: be6b635cd674 ("netfilter: nf_nat: generalize IPv6 masquerading support for nf_tables")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
register_{netdevice/inetaddr/inet6addr}_notifier may return an error
value, this patch adds the code to handle these error paths.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When ip6_route_me_harder is invoked, it resets outgoing interface of:
- link-local scoped packets sent by neighbor discovery
- multicast packets sent by MLD host
- multicast packets send by MLD proxy daemon that sets outgoing
interface through IPV6_PKTINFO ipi6_ifindex
Link-local and multicast packets must keep their original oif after
ip6_route_me_harder is called.
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot was able to trigger the WARN in cttimeout_default_get() by
passing UDPLITE as l4protocol. Alias UDPLITE to UDP, both use
same timeout values.
Furthermore, also fetch GRE timeouts. GRE is a bit more complicated,
as it still can be a module and its netns_proto_gre struct layout isn't
visible outside of the gre module. Can't move timeouts around, it
appears conntrack sysctl unregister assumes net_generic() returns
nf_proto_net, so we get crash. Expose layout of netns_proto_gre instead.
A followup nf-next patch could make gre tracker be built-in as well
if needed, its not that large.
Last, make the WARN() mention the missing protocol value in case
anything else is missing.
Reported-by: syzbot+2fae8fa157dd92618cae@syzkaller.appspotmail.com
Fixes: 8866df9264a3 ("netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ip_vs_dst_event is supposed to clean up all dst used in ipvs'
destinations when a net dev is going down. But it works only
when the dst's dev is the same as the dev from the event.
Now with the same priority but late registration,
ip_vs_dst_notifier is always called later than ipv6_dev_notf
where the dst's dev is set to lo for NETDEV_DOWN event.
As the dst's dev lo is not the same as the dev from the event
in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work.
Also as these dst have to wait for dest_trash_timer to clean
them up. It would cause some non-permanent kernel warnings:
unregister_netdevice: waiting for br0 to become free. Usage count = 3
To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf
by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.
Note that for ipv4 route fib_netdev_notifier doesn't set dst's
dev to lo in NETDEV_DOWN event, so this fix is only needed when
IP_VS_IPV6 is defined.
Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2018-11-25
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix an off-by-one bug when adjusting subprog start offsets after
patching, from Edward.
2) Fix several bugs such as overflow in size allocation in queue /
stack map creation, from Alexei.
3) Fix wrong IPv6 destination port byte order in bpf_sk_lookup_udp
helper, from Andrey.
4) Fix several bugs in bpftool such as preventing an infinite loop
in get_fdinfo, error handling and man page references, from Quentin.
5) Fix a warning in bpf_trace_printk() that wasn't catching an
invalid format string, from Martynas.
6) Fix a bug in BPF cgroup local storage where non-atomic allocation
was used in atomic context, from Roman.
7) Fix a NULL pointer dereference bug in bpftool from reallocarray()
error handling, from Jakub and Wen.
8) Add a copy of pkt_cls.h and tc_bpf.h uapi headers to the tools
include infrastructure so that bpftool compiles on older RHEL7-like
user space which does not ship these headers, from Yonghong.
9) Fix BPF kselftests for user space where to get ping test working
with ping6 and ping -6, from Li.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ip packet generation, pagedlen is initialized for each skb at the
start of the loop in __ip(6)_append_data, before label alloc_new_skb.
Depending on compiler options, code can be generated that jumps to
this label, triggering use of an an uninitialized variable.
In practice, at -O2, the generated code moves the initialization below
the label. But the code should not rely on that for correctness.
Fixes: 15e36f5b8e98 ("udp: paged allocation with gso")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a qdisc setup including pacing FQ is dismantled and recreated,
some TCP packets are sent earlier than instructed by TCP stack.
TCP can be fooled when ACK comes back, because the following
operation can return a negative value.
tcp_time_stamp(tp) - tp->rx_opt.rcv_tsecr;
Some paths in TCP stack were not dealing properly with this,
this patch addresses four of them.
Fixes: ab408b6dc744 ("tcp: switch tcp and sch_fq to new earliest departure time model")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter.
2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann.
3) Fix socket wmem accounting in SCTP, from Xin Long.
4) Fix failed resume crash in ena driver, from Arthur Kiyanovski.
5) qed driver passes bytes instead of bits into second arg of
bitmap_weight(). From Denis Bolotin.
6) Fix reset deadlock in ibmvnic, from Juliet Kim.
7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr
Machata.
8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK
compression during this period, from Eric Dumazet.
9) Add atomicity to SMC protocol cursor handling, from Ursula Braun.
10) Don't leave dangling error pointer if bpf_prog_add() fails in
thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO
headers, set sq->tso_hdrs to NULL.
11) Fix race condition over state variables in act_police, from Davide
Caratti.
12) Disable guest csum in the presence of XDP in virtio_net, from Jason
Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: gemini: Fix copy/paste error
net: phy: mscc: fix deadlock in vsc85xx_default_config
dt-bindings: dsa: Fix typo in "probed"
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
net: amd: add missing of_node_put()
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
virtio-net: fail XDP set if guest csum is negotiated
virtio-net: disable guest csum during XDP set
net/sched: act_police: add missing spinlock initialization
net: don't keep lonely packets forever in the gro hash
net/ipv6: re-do dad when interface has IFF_NOARP flag change
packet: copy user buffers before orphan or clone
ibmvnic: Update driver queues after change in ring size support
ibmvnic: Fix RX queue buffer cleanup
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
net/dim: Update DIM start sample after each DIM iteration
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
net/smc: use after free fix in smc_wr_tx_put_slot()
net/smc: atomic SMCD cursor handling
net/smc: add SMC-D shutdown signal
...
|
|
Pullk ceph fix from Ilya Dryomov:
"A messenger fix, marked for stable"
* tag 'ceph-for-4.20-rc4' of https://github.com/ceph/ceph-client:
libceph: fall back to sendmsg for slab pages
|
|
commit f2cbd4852820 ("net/sched: act_police: fix race condition on state
variables") introduces a new spinlock, but forgets its initialization.
Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police'
action is newly created, to avoid the following lockdep splat:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
<...>
Call Trace:
dump_stack+0x85/0xcb
register_lock_class+0x581/0x590
__lock_acquire+0xd4/0x1330
? tcf_police_init+0x2fa/0x650 [act_police]
? lock_acquire+0x9e/0x1a0
lock_acquire+0x9e/0x1a0
? tcf_police_init+0x2fa/0x650 [act_police]
? tcf_police_init+0x55a/0x650 [act_police]
_raw_spin_lock_bh+0x34/0x40
? tcf_police_init+0x2fa/0x650 [act_police]
tcf_police_init+0x2fa/0x650 [act_police]
tcf_action_init_1+0x384/0x4c0
tcf_action_init+0xf6/0x160
tcf_action_add+0x73/0x170
tc_ctl_action+0x122/0x160
rtnetlink_rcv_msg+0x2a4/0x490
? netlink_deliver_tap+0x99/0x400
? validate_linkmsg+0x370/0x370
netlink_rcv_skb+0x4d/0x130
netlink_unicast+0x196/0x230
netlink_sendmsg+0x2e5/0x3e0
sock_sendmsg+0x36/0x40
___sys_sendmsg+0x280/0x2f0
? _raw_spin_unlock+0x24/0x30
? handle_pte_fault+0xafe/0xf30
? find_held_lock+0x2d/0x90
? syscall_trace_enter+0x1df/0x360
? __sys_sendmsg+0x5e/0xa0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x60/0x210
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f1841c7cf10
Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24
RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10
RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003
RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc
R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0
R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000
Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric noted that with UDP GRO and NAPI timeout, we could keep a single
UDP packet inside the GRO hash forever, if the related NAPI instance
calls napi_gro_complete() at an higher frequency than the NAPI timeout.
Willem noted that even TCP packets could be trapped there, till the
next retransmission.
This patch tries to address the issue, flushing the old packets -
those with a NAPI_GRO_CB age before the current jiffy - before scheduling
the NAPI timeout. The rationale is that such a timeout should be
well below a jiffy and we are not flushing packets eligible for sane GRO.
v1 -> v2:
- clarified the commit message and comment
RFC -> v1:
- added 'Fixes tags', cleaned-up the wording.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we add a new IPv6 address, we should also join corresponding solicited-node
multicast address, unless the interface has IFF_NOARP flag, as function
addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do
not do dad and add the mcast address. So we will drop corresponding neighbour
discovery message that came from other nodes.
A typical example is after creating a ipvlan with mode l3, setting up an ipv6
address and changing the mode to l2. Then we will not be able to ping this
address as the interface doesn't join related solicited-node mcast address.
Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add
corresponding mcast group and check if there is a duplicate address on the
network.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tpacket_snd sends packets with user pages linked into skb frags. It
notifies that pages can be reused when the skb is released by setting
skb->destructor to tpacket_destruct_skb.
This can cause data corruption if the skb is orphaned (e.g., on
transmit through veth) or cloned (e.g., on mirror to another psock).
Create a kernel-private copy of data in these cases, same as tun/tap
zerocopy transmission. Reuse that infrastructure: mark the skb as
SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx).
Unlike other zerocopy packets, do not set shinfo destructor_arg to
struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify
when the original skb is released and a timestamp is recorded. Do not
change this timestamp behavior. The ubuf_info->callback is not needed
anyway, as no zerocopy notification is expected.
Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The
resulting value is not a valid ubuf_info pointer, nor a valid
tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this.
The fix relies on features introduced in commit 52267790ef52 ("sock:
add MSG_ZEROCOPY"), so can be backported as is only to 4.14.
Tested with from `./in_netns.sh ./txring_overwrite` from
http://github.com/wdebruij/kerneltools/tests
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In smc_wr_tx_put_slot() field pend->idx is used after being
cleared. That means always idx 0 is cleared in the wr_tx_mask.
This results in a broken administration of available WR send
payload buffers.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Running uperf tests with SMCD on LPARs results in corrupted cursors.
SMCD cursors should be treated atomically to fix cursor corruption.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a SMC-D link group is freed, a shutdown signal should be sent to
the peer to indicate that the link group is invalid. This patch adds the
shutdown signal to the SMC code.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When searching for an existing link group the queue pair number is also
to be taken into consideration. When the SMC server sends a new number
in a CLC packet (keeping all other values equal) then a new link group
is to be created on the SMC client side.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of a non-blocking SMC socket, the initial CLC handshake is
performed over a blocking TCP connection in a worker. If the SMC socket
is released, smc_release has to wait for the blocking CLC socket
operations (e.g., kernel_connect) inside the worker.
This patch aborts a CLC connection when the respective non-blocking SMC
socket is released to avoid waiting on socket operations or timeouts.
Signed-off-by: Hans Wippel <hwippel@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jean-Louis reported a TCP regression and bisected to recent SACK
compression.
After a loss episode (receiver not able to keep up and dropping
packets because its backlog is full), linux TCP stack is sending
a single SACK (DUPACK).
Sender waits a full RTO timer before recovering losses.
While RFC 6675 says in section 5, "Algorithm Details",
(2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true --
indicating at least three segments have arrived above the current
cumulative acknowledgment point, which is taken to indicate loss
-- go to step (4).
...
(4) Invoke fast retransmit and enter loss recovery as follows:
there are old TCP stacks not implementing this strategy, and
still counting the dupacks before starting fast retransmit.
While these stacks probably perform poorly when receivers implement
LRO/GRO, we should be a little more gentle to them.
This patch makes sure we do not enable SACK compression unless
3 dupacks have been sent since last rcv_nxt update.
Ideally we should even rearm the timer to send one or two
more DUPACK if no more packets are coming, but that will
be work aiming for linux-4.21.
Many thanks to Jean-Louis for bisecting the issue, providing
packet captures and testing this patch.
Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a packet is trapped and the corresponding SKB marked as
already-forwarded, it retains this marking even after it is forwarded
across veth links into another bridge. There, since it ingresses the
bridge over veth, which doesn't have offload_fwd_mark, it triggers a
warning in nbp_switchdev_frame_mark().
Then nbp_switchdev_allowed_egress() decides not to allow egress from
this bridge through another veth, because the SKB is already marked, and
the mark (of 0) of course matches. Thus the packet is incorrectly
blocked.
Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That
function is called from tunnels and also from veth, and thus catches the
cases where traffic is forwarded between bridges and transformed in a
way that invalidates the marking.
Fixes: 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices")
Fixes: abf4bb6b63d0 ("skbuff: Add the offload_mr_fwd_mark field")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
after 'police' configuration parameters were converted to use RCU instead
of spinlock, the state variables used to compute the traffic rate (namely
'tcfp_toks', 'tcfp_ptoks' and 'tcfp_t_c') are erroneously read/updated in
the traffic path without any protection.
Use a dedicated spinlock to avoid race conditions on these variables, and
ensure proper cache-line alignment. In this way, 'police' is still faster
than what we observed when 'tcf_lock' was used in the traffic path _ i.e.
reverting commit 2d550dbad83c ("net/sched: act_police: don't use spinlock
in the data path"). Moreover, we preserve the throughput improvement that
was obtained after 'police' started using per-cpu counters, when 'avrate'
is used instead of 'rate'.
Changes since v1 (thanks to Eric Dumazet):
- call ktime_get_ns() before acquiring the lock in the traffic path
- use a dedicated spinlock instead of tcf_lock
- improve cache-line usage
Fixes: 2d550dbad83c ("net/sched: act_police: don't use spinlock in the data path")
Reported-and-suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
coalescing
During tcp coalescing ensure that the skb hardware timestamp refers to the
highest sequence number data.
Previously only the software timestamp was updated during coalescing.
Signed-off-by: Stephen Mallon <stephen.mallon@sydney.edu.au>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different from processing the addstrm_out request, The receiver handles
an addstrm_in request by sending back an addstrm_out request to the
sender who will increase its stream's in and incnt later.
Now stream->incnt has been increased since it sent out the addstrm_in
request in sctp_send_add_streams(), with the wrong stream->incnt will
even cause crash when copying stream info from the old stream's in to
the new one's in sctp_process_strreset_addstrm_out().
This patch is to fix it by simply removing the stream->incnt change
from sctp_send_add_streams().
Fixes: 242bd2d519d7 ("sctp: implement sender-side procedures for Add Incoming/Outgoing Streams Request Parameter")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 22d7be267eaa8114dcc28d66c1c347f667d7878a.
The dst's mtu in transport can be updated by a non sctp place like
in xfrm where the MTU information didn't get synced between asoc,
transport and dst, so it is still needed to do the pmtu check
in sctp_packet_config.
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As rfc7496#section4.5 says about SCTP_PR_SUPPORTED:
This socket option allows the enabling or disabling of the
negotiation of PR-SCTP support for future associations. For existing
associations, it allows one to query whether or not PR-SCTP support
was negotiated on a particular association.
It means only sctp sock's prsctp_enable can be set.
Note that for the limitation of SCTP_{CURRENT|ALL}_ASSOC, we will
add it when introducing SCTP_{FUTURE|CURRENT|ALL}_ASSOC for linux
sctp in another patchset.
v1->v2:
- drop the params.assoc_id check as Neil suggested.
Fixes: 28aa4c26fce2 ("sctp: add SCTP_PR_SUPPORTED on sctp sockopt")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now sctp increases sk_wmem_alloc by 1 when doing set_owner_w for the
skb allocked in sctp_packet_transmit and decreases by 1 when freeing
this skb.
But when this skb goes through networking stack, some subcomponents
might change skb->truesize and add the same amount on sk_wmem_alloc.
However sctp doesn't know the amount to decrease by, it would cause
a leak on sk->sk_wmem_alloc and the sock can never be freed.
Xiumei found this issue when it hit esp_output_head() by using sctp
over ipsec, where skb->truesize is added and so is sk->sk_wmem_alloc.
Since sctp has used sk_wmem_queued to count for writable space since
Commit cd305c74b0f8 ("sctp: use sk_wmem_queued to check for writable
space"), it's ok to fix it by counting sk_wmem_alloc by skb truesize
in sctp_packet_transmit.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix some potentially uninitialized variables and use-after-free in
kvaser_usb can drier, from Jimmy Assarsson.
2) Fix leaks in qed driver, from Denis Bolotin.
3) Socket leak in l2tp, from Xin Long.
4) RSS context allocation fix in bnxt_en from Michael Chan.
5) Fix cxgb4 build errors, from Ganesh Goudar.
6) Route leaks in ipv6 when removing exceptions, from Xin Long.
7) Memory leak in IDR allocation handling of act_pedit, from Davide
Caratti.
8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov.
9) When MTU is locked, do not force DF bit on ipv4 tunnels. From
Sabrina Dubroca.
10) When NAPI cached skb is reused, we must set it to the proper initial
state which includes skb->pkt_type. From Eric Dumazet.
11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy.
12) Set RX queue properly in various tuntap receive paths, from Matthew
Cover.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
tuntap: fix multiqueue rx
ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF
tipc: don't assume linear buffer when reading ancillary data
tipc: fix lockdep warning when reinitilaizing sockets
net-gro: reset skb->pkt_type in napi_reuse_skb()
tc-testing: tdc.py: Guard against lack of returncode in executed command
tc-testing: tdc.py: ignore errors when decoding stdout/stderr
ip_tunnel: don't force DF when MTU is locked
MAINTAINERS: Add entry for CAKE qdisc
net: bridge: fix vlan stats use-after-free on destruction
socket: do a generic_file_splice_read when proto_ops has no splice_read
net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs"
net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
net/sched: act_pedit: fix memory leak when IDR allocation fails
net: lantiq: Fix returned value in case of error in 'xrx200_probe()'
ipv6: fix a dst leak when removing its exception
net: mvneta: Don't advertise 2.5G modes
drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo
net/mlx4: Fix UBSAN warning of signed integer overflow
...
|
|
skb_can_coalesce() allows coalescing neighboring slab objects into
a single frag:
return page == skb_frag_page(frag) &&
off == frag->page_offset + skb_frag_size(frag);
ceph_tcp_sendpage() can be handed slab pages. One example of this is
XFS: it passes down sector sized slab objects for its metadata I/O. If
the kernel client is co-located on the OSD node, the skb may go through
loopback and pop on the receive side with the exact same set of frags.
When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy
complains because the size exceeds the object's allocated size:
usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes)
Although skb_can_coalesce() could be taught to return false if the
resulting frag would cross a slab object boundary, we already have
a fallback for non-refcounted pages. Utilize it for slab pages too.
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Preethi reported that PMTU discovery for UDP/raw applications is not
working in the presence of VRF when the socket is not bound to a device.
The problem is that ip6_sk_update_pmtu does not consider the L3 domain
of the skb device if the socket is not bound. Update the function to
set oif to the L3 master device if relevant.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Preethi Ramachandra <preethir@juniper.net>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The code for reading ancillary data from a received buffer is assuming
the buffer is linear. To make this assumption true we have to linearize
the buffer before message data is read.
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We get the following warning:
[ 47.926140] 32-bit node address hash set to 2010a0a
[ 47.927202]
[ 47.927433] ================================
[ 47.928050] WARNING: inconsistent lock state
[ 47.928661] 4.19.0+ #37 Tainted: G E
[ 47.929346] --------------------------------
[ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes:
[ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0
[ 47.930116] {SOFTIRQ-ON-W} state was registered at:
[ 47.930116] _raw_spin_lock+0x29/0x60
[ 47.930116] rht_deferred_worker+0x556/0x810
[ 47.930116] process_one_work+0x1f5/0x540
[ 47.930116] worker_thread+0x64/0x3e0
[ 47.930116] kthread+0x112/0x150
[ 47.930116] ret_from_fork+0x3a/0x50
[ 47.930116] irq event stamp: 14044
[ 47.930116] hardirqs last enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0
[ 47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0
[ 47.938117] softirqs last enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60
[ 47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0
[ 47.938117]
[ 47.938117] other info that might help us debug this:
[ 47.938117] Possible unsafe locking scenario:
[ 47.938117]
[ 47.938117] CPU0
[ 47.938117] ----
[ 47.938117] lock(&(&ht->lock)->rlock);
[ 47.938117] <Interrupt>
[ 47.938117] lock(&(&ht->lock)->rlock);
[ 47.938117]
[ 47.938117] *** DEADLOCK ***
[ 47.938117]
[ 47.938117] 2 locks held by swapper/3/0:
[ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280
[ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc]
[ 47.938117]
[ 47.938117] stack backtrace:
[ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37
[ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 47.938117] Call Trace:
[ 47.938117] <IRQ>
[ 47.938117] dump_stack+0x5e/0x8b
[ 47.938117] print_usage_bug+0x1ed/0x1ff
[ 47.938117] mark_lock+0x5b5/0x630
[ 47.938117] __lock_acquire+0x4c0/0x18f0
[ 47.938117] ? lock_acquire+0xa6/0x180
[ 47.938117] lock_acquire+0xa6/0x180
[ 47.938117] ? rhashtable_walk_enter+0x36/0xb0
[ 47.938117] _raw_spin_lock+0x29/0x60
[ 47.938117] ? rhashtable_walk_enter+0x36/0xb0
[ 47.938117] rhashtable_walk_enter+0x36/0xb0
[ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc]
[ 47.938117] ? mark_held_locks+0x6f/0x90
[ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0
[ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0
[ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc]
[ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc]
[ 47.938117] ? call_timer_fn+0x5/0x280
[ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[ 47.938117] call_timer_fn+0xa1/0x280
[ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc]
[ 47.938117] run_timer_softirq+0x1f2/0x4d0
[ 47.938117] __do_softirq+0xfc/0x413
[ 47.938117] irq_exit+0xb5/0xc0
[ 47.938117] smp_apic_timer_interrupt+0xac/0x210
[ 47.938117] apic_timer_interrupt+0xf/0x20
[ 47.938117] </IRQ>
[ 47.938117] RIP: 0010:default_idle+0x1c/0x140
[ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b
[ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13
[ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001
[ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200
[ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
[ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200
[ 47.938117] ? default_idle+0x1a/0x140
[ 47.938117] do_idle+0x1bc/0x280
[ 47.938117] cpu_startup_entry+0x19/0x20
[ 47.938117] start_secondary+0x187/0x1c0
[ 47.938117] secondary_startup_64+0xa4/0xb0
The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is
calling the function rhashtable_walk_enter() within a timer interrupt.
We fix this by executing tipc_net_finalize() in work queue context.
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.
This is indeed the value right after a fresh skb allocation.
However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.
Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.
napi_reuse_skb() was added in commit 96e93eab2033 ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.
Fixes: 96e93eab2033 ("gro: Add internal interfaces for VLAN")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
