summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-09-21SUNRPC: Remove dprintk call sites in RPC queuing functionsChuck Lever
Remove redundant call sites or call sites that are already covered by tracepoints. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Clean up RPC scheduler tracepointsChuck Lever
Remove several redundant dprintk call sites, and replace a couple of potentially useful ones with tracepoints. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Replace rpcbind dprintk call sites with tracepointsChuck Lever
In many cases, tracepoints already report these errors. In others, the dprintks were mainly useful when this code was less mature. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove more dprintks in rpcb_clnt.cChuck Lever
Clean up: These are superfluous now that rpc_create() and friends have tracepoints to report errors. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove dprintk call sites in rpcbind XDR functionsChuck Lever
Clean up: Other XDR functions no longer have dprintk call sites. These were added during development and can be removed now that the code is mature. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Hoist trace_xprtrdma_op_setport into generic codeChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove rpcb_getport_async dprintk call sitesChuck Lever
In many cases, tracepoints already report these errors. In others, the dprintks were mainly useful when this code was less mature. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Clean up call_bind_status() observabilityChuck Lever
Time to remove dprintk call sites in here. Regarding the rpc_bind_status tracepoint: It's friendlier to administrators if they don't have to look up the error code to figure out what went wrong. Replace trace_rpc_bind_status with a set of tracepoints that report more specifically what the problem was, and what RPC program/version was being queried. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove dprintk call site in call_decodeChuck Lever
Clean up. When enabled, this dprintk adds a line in /var/log/messages after every RPC that reports the task ID (no connection to on the wire XID values) and the RPC's result (no connection to the program, operation, or the arguments and results). Thus it's value is pretty low. Let's remove it. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Trace call_refresh eventsChuck Lever
Clean up: Replace dprintk call sites. Note that rpc_call_rpcerror() already has a trace point, so perhaps adding trace_rpc_refresh_status() isn't necessary. However, it does report a particular category of error. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Add trace_rpc_timeout_status()Chuck Lever
For a long while we've wanted a tracepoint that fires when a major timeout is reported in the system log. Such a tracepoint can be attached to other actions that can take place when a timeout is detected (eg, server or connection health assessment). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Mitigate cond_resched() in xprt_transmit()Chuck Lever
The original purpose of this expensive call is to prevent a long queue of requests from blocking other work. The cond_resched() call is unnecessary after just a single send operation. For longer queues, instead of invoking the kernel scheduler, simply release the transport send lock and return to the RPC scheduler. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Replace connect dprintk call sites with a tracepointChuck Lever
This trace event can be used to audit transport connections from the client. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove dprintk call site in call_start()Chuck Lever
Clean up: The rpc_rpc_request tracepoint serves the same purpose. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove the dprint_status() macroChuck Lever
Clean up: The rpc_task_run_action tracepoint serves the same purpose. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Replace dprintk() call site in xs_nospace()Chuck Lever
"no socket space" is an exceptional and infrequent condition that troubleshooters want to know about. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Replace dprintk() call site in xprt_prepare_transmitChuck Lever
Generate a trace event when an RPC request is queued without being sent immediately. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Update debugging instrumentation in xprt_do_reserve()Chuck Lever
Replace a dprintk() with a tracepoint. The tracepoint marks the point where an RPC request is assigned an XID. Additional clean up: Remove trace_xprt_enq_xmit, which reports much the same thing. That tracepoint was added for debugging commit 918f3c1fe83c ("SUNRPC: Improve latency for interactive tasks"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove debugging instrumentation from xprt_releaseChuck Lever
These instruments don't appear to add any substantial value. We already have this at the termination of each RPC: iozone-2617 [002] 975.713126: rpc_stats_latency: task:418@5 xid=0x260eab5d nfsv3 LOOKUP backlog=15 rtt=32 execute=58 iozone-2617 [002] 975.713127: xprt_release_cong: task:418@5 snd_task:4294967295 cong=256 cwnd=16384 iozone-2617 [002] 975.713127: xprt_put_cong: task:418@5 snd_task:4294967295 cong=0 cwnd=16384 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Hoist trace_xprtrdma_op_allocate into generic codeChuck Lever
Introduce a tracepoint in call_allocate that reports the exact sizes in the RPC buffer allocation request and the status of the result. This helps catch problems with XDR buffer provisioning, and replaces transport-specific debugging instrumentation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Remove trace_xprt_complete_rqst()Chuck Lever
Request completion is already recorded by an "rpc_task_wakeup queue=xprt_pending" trace record. A subsequent rpc_xdr_recvfrom trace record shows the number of bytes received. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC dont update timeout value on connection resetOlga Kornievskaia
Current behaviour: every time a v3 operation is re-sent to the server we update (double) the timeout. There is no distinction between whether or not the previous timer had expired before the re-sent happened. Here's the scenario: 1. Client sends a v3 operation 2. Server RST-s the connection (prior to the timeout) (eg., connection is immediately reset) 3. Client re-sends a v3 operation but the timeout is now 120sec. As a result, an application sees 2mins pause before a retry in case server again does not reply. Where as if a connection reset didn't change the timeout value, the client would have re-tried (the 3rd time) after 60secs. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-09-21SUNRPC: Fix svc_flush_dcache()Chuck Lever
On platforms that implement flush_dcache_page(), a large NFS WRITE triggers the WARN_ONCE in bvec_iter_advance(): Sep 20 14:01:05 klimt.1015granger.net kernel: Attempted to advance past end of bvec iter Sep 20 14:01:05 klimt.1015granger.net kernel: WARNING: CPU: 0 PID: 1032 at include/linux/bvec.h:101 bvec_iter_advance.isra.0+0xa7/0x158 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: Call Trace: Sep 20 14:01:05 klimt.1015granger.net kernel: svc_tcp_recvfrom+0x60c/0x12c7 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? bvec_iter_advance.isra.0+0x158/0x158 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? del_timer_sync+0x4b/0x55 Sep 20 14:01:05 klimt.1015granger.net kernel: ? test_bit+0x1d/0x27 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: svc_recv+0x1193/0x15e4 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? try_to_freeze.isra.0+0x6f/0x6f [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? refcount_sub_and_test.constprop.0+0x13/0x40 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? svc_xprt_put+0x1e/0x29f [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? svc_send+0x39f/0x3c1 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: nfsd+0x282/0x345 [nfsd] Sep 20 14:01:05 klimt.1015granger.net kernel: ? __kthread_parkme+0x74/0xba Sep 20 14:01:05 klimt.1015granger.net kernel: kthread+0x2ad/0x2bc Sep 20 14:01:05 klimt.1015granger.net kernel: ? nfsd_destroy+0x124/0x124 [nfsd] Sep 20 14:01:05 klimt.1015granger.net kernel: ? test_bit+0x1d/0x27 Sep 20 14:01:05 klimt.1015granger.net kernel: ? kthread_mod_delayed_work+0x115/0x115 Sep 20 14:01:05 klimt.1015granger.net kernel: ret_from_fork+0x22/0x30 Reported-by: He Zhe <zhe.he@windriver.com> Fixes: ca07eda33e01 ("SUNRPC: Refactor svc_recvfrom()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-09-21can: remove "WITH Linux-syscall-note" from SPDX tag of C filesMasahiro Yamada
The "WITH Linux-syscall-note" exception is intended for UAPI headers. See LICENSES/exceptions/Linux-syscall-note Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20200403073741.18352-1-masahiroy@kernel.org Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: raw: fix indentionMarc Kleine-Budde
This patch fixes the indention to follow kernel coding style. Link: https://lore.kernel.org/r/20200915223527.1417033-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-21can: net: fix spelling mistakesMarc Kleine-Budde
This patch fixes spelling erros found by "codespell" in the net/can subtree. Link: https://lore.kernel.org/r/20200915223527.1417033-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-09-20RDS: drop double zeroingJulia Lawall
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,n,flags; @@ x = - kcalloc + kmalloc_array (n,sizeof(*x),flags) ... sg_init_table(x,n) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: tag_sja1105: add compatibility with hwaccel VLAN tagsVladimir Oltean
Check whether there is any hwaccel VLAN tag on RX, and if there is, treat it as the tag_8021q header. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: tag_8021q: add VLANs to the master interface tooVladimir Oltean
The whole purpose of tag_8021q is to send VLAN-tagged traffic to the CPU, from which the driver can decode the source port and switch id. Currently this only works if the VLAN filtering on the master is disabled. Change that by explicitly adding code to tag_8021q.c to add the VLANs corresponding to the tags to the filter of the master interface. Because we now need to call vlan_vid_add, then we also need to hold the RTNL mutex. Propagate that requirement to the callers of dsa_8021q_setup and modify the existing call sites as appropriate. Note that one call path, sja1105_best_effort_vlan_filtering_set -> sja1105_vlan_filtering -> sja1105_setup_8021q_tagging, was already holding this lock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: install VLANs into the master's RX filter tooVladimir Oltean
Most DSA switch tags shift the EtherType to the right, causing the master to not parse the VLAN as VLAN. However, not all switches do that (example: tail tags, tag_8021q etc), and if the DSA master has "rx-vlan-filter: on" in ethtool -k, then we have a problem. Therefore, we could populate the VLAN table of the master, just in case (for some switches it will not make a difference), so that network I/O can work even with a VLAN filtering master. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: allow 8021q uppers while the bridge has vlan_filtering=0Vladimir Oltean
When the bridge has VLAN awareness disabled there isn't any duplication of functionality, since the bridge does not process VLAN. Don't deny adding 8021q uppers to DSA switch ports in that case. The switch is supposed to simply pass traffic leaving the VLAN tag as-is, and the stack will happily strip the VLAN tag for all 8021q uppers that exist. We need to ensure that there are no 8021q uppers when the user attempts to enable bridge vlan_filtering. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: refuse configuration in prepare phase of dsa_port_vlan_filtering()Vladimir Oltean
The current logic beats me a little bit. The comment that "bridge skips -EOPNOTSUPP, so skip the prepare phase" was introduced in commit fb2dabad69f0 ("net: dsa: support VLAN filtering switchdev attr"). I'm not sure: (a) ok, the bridge skips -EOPNOTSUPP, but, so what, where are we returning -EOPNOTSUPP? (b) even if we are, and I'm just not seeing it, what is the causality relationship between the bridge skipping -EOPNOTSUPP and DSA skipping the prepare phase, and just returning zero? One thing is certain beyond doubt though, and that is that DSA currently refuses VLAN filtering from the "commit" phase instead of "prepare", and that this is not a good thing: ip link add br0 type bridge ip link add br1 type bridge vlan_filtering 1 ip link set swp2 master br0 ip link set swp3 master br1 [ 3790.379389] 001: sja1105 spi0.1: VLAN filtering is a global setting [ 3790.379399] 001: ------------[ cut here ]------------ [ 3790.379403] 001: WARNING: CPU: 1 PID: 515 at net/switchdev/switchdev.c:157 switchdev_port_attr_set_now+0x9c/0xa4 [ 3790.379420] 001: swp3: Commit of attribute (id=6) failed. [ 3790.379533] 001: [<c11ff588>] (switchdev_port_attr_set_now) from [<c11b62e4>] (nbp_vlan_init+0x84/0x148) [ 3790.379544] 001: [<c11b62e4>] (nbp_vlan_init) from [<c11a2ff0>] (br_add_if+0x514/0x670) [ 3790.379554] 001: [<c11a2ff0>] (br_add_if) from [<c1031b5c>] (do_setlink+0x38c/0xab0) [ 3790.379565] 001: [<c1031b5c>] (do_setlink) from [<c1036fe8>] (__rtnl_newlink+0x44c/0x748) [ 3790.379573] 001: [<c1036fe8>] (__rtnl_newlink) from [<c1037328>] (rtnl_newlink+0x44/0x60) [ 3790.379580] 001: [<c1037328>] (rtnl_newlink) from [<c10315fc>] (rtnetlink_rcv_msg+0x124/0x2f8) [ 3790.379590] 001: [<c10315fc>] (rtnetlink_rcv_msg) from [<c10926b8>] (netlink_rcv_skb+0xb8/0x110) [ 3790.379806] 001: ---[ end trace 0000000000000002 ]--- [ 3790.379819] 001: sja1105 spi0.1 swp3: failed to initialize vlan filtering on this port So move the current logic that may fail (except ds->ops->port_vlan_filtering, that is way harder) into the prepare stage of the switchdev transaction. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: convert denying bridge VLAN with existing 8021q upper to ↵Vladimir Oltean
PRECHANGEUPPER This is checking for the following order of operations, and makes sure to deny that configuration: ip link add link swp2 name swp2.100 type vlan id 100 ip link add br0 type bridge vlan_filtering 1 ip link set swp2 master br0 bridge vlan add dev swp2 vid 100 Instead of using vlan_for_each(), which looks at the VLAN filters installed with vlan_vid_add(), just track the 8021q uppers. This has the advantage of freeing up the vlan_vid_add() call for actual VLAN filtering. There is another change in this patch. The check is moved in slave.c, from switch.c. I don't think it makes sense to have this 8021q upper check for each switch port that gets notified of that VLAN addition (these include DSA links and CPU ports, we know those can't have 8021q uppers because they don't have a net_device registered for them), so just do it in slave.c, for that one slave interface. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: convert check for 802.1Q upper when bridged into PRECHANGEUPPERVladimir Oltean
DSA tries to prevent having a VLAN added by a bridge and by an 802.1Q upper at the same time. It does that by checking the VID in .ndo_vlan_rx_add_vid(), since that's something that the 8021q module calls, via vlan_vid_add(). When a VLAN matches in both subsystems, this check returns -EBUSY. However the vlan_vid_add() function isn't specific to the 8021q module in any way at all. It is simply the kernel's way to tell an interface to add a VLAN to its RX filter and not drop that VLAN. So there's no reason to return -EBUSY when somebody tries to call vlan_vid_add() for a VLAN that was installed by the bridge. The proper behavior is to accept that configuration. So what's wrong is how DSA checks that it has an 8021q upper. It should look at the actual uppers for that, not just assume that the 8021q module was somewhere in the call stack of .ndo_vlan_rx_add_vid(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: rename dsa_slave_upper_vlan_check to something more suggestiveVladimir Oltean
We'll be adding a new check in the PRECHANGEUPPER notifier, where we'll need to check some VLAN uppers. It is hard to do that when there is already a function named dsa_slave_upper_vlan_check. So rename this one. Not to mention that this function probably shouldn't have started with "dsa_slave_" in the first place, since the struct net_device argument isn't a DSA slave, but an 8021q upper of one. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: dsa: deny enslaving 802.1Q upper to VLAN-aware bridge from PRECHANGEUPPERVladimir Oltean
There doesn't seem to be any strong technical reason for doing it this way, but we'll be adding more checks for invalid upper device configurations, and it will be easier to have them all grouped under PRECHANGEUPPER. Tested that it still works: ip link set br0 type bridge vlan_filtering 1 ip link add link swp2 name swp2.100 type vlan id 100 ip link set swp2.100 master br0 [ 20.321312] br0: port 5(swp2.100) entered blocking state [ 20.326711] br0: port 5(swp2.100) entered disabled state Error: dsa_core: Cannot enslave VLAN device into VLAN aware bridge. [ 20.346549] br0: port 5(swp2.100) entered blocking state [ 20.351957] br0: port 5(swp2.100) entered disabled state Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: remove unnecessary NULL checking in napi_consume_skb()Yunsheng Lin
When budget is non-zero, skb_unref() has already handled the NULL checking. When budget is zero, the dev_consume_skb_any() has handled NULL checking in __dev_kfree_skb_irq(), or dev_kfree_skb() which also ultimately call skb_unref(). So remove the unnecessary checking in napi_consume_skb(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendantHenry Ptasinski
When calculating ancestor_size with IPv6 enabled, simply using sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for alignment in the struct sctp6_sock. On x86, there aren't any extra bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte boundary so there were 4 pad bytes that were omitted from the ancestor_size calculation. This would lead to corruption of the pd_lobby pointers, causing an oops when trying to free the sctp structure on socket close. Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant") Signed-off-by: Henry Ptasinski <hptasinski@google.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20Bluetooth: Fix auto-creation of hci_conn at Conn Complete eventSonny Sasaka
Currently the code auto-creates hci_conn only if the remote address has been discovered before. This may not be the case. For example, the remote device may trigger connection after reboot at already-paired state so there is no inquiry result found, but it is still correct to create the hci_conn when Connection Complete event is received. A better guard is to check against bredr allowlist. Devices in the allowlist have been given permission to auto-connect. Fixes: 4f40afc6c764 ("Bluetooth: Handle BR/EDR devices during suspend") Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-20Bluetooth: Set scan parameters for ADV MonitorHoward Chung
Set scan parameters when there is at least one Advertisement monitor. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-20Bluetooth: Update Adv monitor count upon removalMiao-chen Chou
This fixes the count of Adv monitor upon monitor removal. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-remove command on one console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-19ethtool: Add 100base-FX link mode entriesDan Murphy
Add entries for the 100base-FX full and half duplex supported modes. $ ethtool eth0 Supported ports: [ FIBRE ] Supported link modes: 100baseFX/Half 100baseFX/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 100baseFX/Half 100baseFX/Full Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 100Mb/s Duplex: Full Auto-negotiation: off Port: MII PHYAD: 1 Transceiver: external Supports Wake-on: gs Wake-on: d SecureOn password: 00:00:00:00:00:00 Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-19net/packet: Fix a comment about network_headerXie He
skb->nh.raw has been renamed as skb->network_header in 2007, in commit b0e380b1d8a8 ("[SK_BUFF]: unions of just one member don't get anything done, kill them") So here we change it to the new name. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: wire up devlink info getAndrew Lunn
Allow the DSA drivers to implement the devlink call to get info info, e.g. driver name, firmware version, ASIC ID, etc. v2: Combine declaration and the assignment on a single line. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: Add devlink regions support to DSAAndrew Lunn
Allow DSA drivers to make use of devlink regions, via simple wrappers. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: dsa: Add helper to convert from devlink to dsAndrew Lunn
Given a devlink instance, return the dsa switch it is associated to. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: devlink: region: Pass the region ops to the snapshot functionAndrew Lunn
Pass the region to be snapshotted to the function performing the snapshot. This allows one function to operate on numerous regions. v4: Add missing kerneldoc for ICE Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMACNecip Fazil Yildiran
When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for CRYPTO_HMAC Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA1 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] WARNING: unmet direct dependencies detected for CRYPTO_SHA256 Depends on [n]: CRYPTO [=n] Selected by [y]: - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y] The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs are subordinate to CRYPTO. Honor the kconfig menu hierarchy to remove kconfig dependency warnings. Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18Merge tag 'batadv-net-for-davem-20200918' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix wrong type use in backbone_gw hash, by Linus Luessing - disable TT re-routing for multicast packets, by Linus Luessing - Add missing include for in_interrupt(), by Sven Eckelmann - fix BLA/multicast issues for packets sent via unicast, by Linus Luessing (3 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: tipc: Supply missing udp_media.h include fileWang Hai
If the header file containing a function's prototype isn't included by the sourcefile containing the associated function, the build system complains of missing prototypes. Fixes the following W=1 kernel build warning(s): net/tipc/udp_media.c:446:5: warning: no previous prototype for ‘tipc_udp_nl_dump_remoteip’ [-Wmissing-prototypes] net/tipc/udp_media.c:532:5: warning: no previous prototype for ‘tipc_udp_nl_add_bearer_data’ [-Wmissing-prototypes] net/tipc/udp_media.c:614:5: warning: no previous prototype for ‘tipc_udp_nl_bearer_add’ [-Wmissing-prototypes] Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:52:24 +0000