| Age | Commit message (Collapse) | Author |
|---|
|
Backlog NAPI is a per-CPU NAPI struct only (with no device behind it)
used by drivers which don't do NAPI them self, RPS and parts of the
stack which need to avoid recursive deadlocks while processing a packet.
The non-NAPI driver use the CPU local backlog NAPI. If RPS is enabled
then a flow for the skb is computed and based on the flow the skb can be
enqueued on a remote CPU. Scheduling/ raising the softirq (for backlog's
NAPI) on the remote CPU isn't trivial because the softirq is only
scheduled on the local CPU and performed after the hardirq is done.
In order to schedule a softirq on the remote CPU, an IPI is sent to the
remote CPU which schedules the backlog-NAPI on the then local CPU.
On PREEMPT_RT interrupts are force-threaded. The soft interrupts are
raised within the interrupt thread and processed after the interrupt
handler completed still within the context of the interrupt thread. The
softirq is handled in the context where it originated.
With force-threaded interrupts enabled, ksoftirqd is woken up if a
softirq is raised from hardirq context. This is the case if it is raised
from an IPI. Additionally there is a warning on PREEMPT_RT if the
softirq is raised from the idle thread.
This was done for two reasons:
- With threaded interrupts the processing should happen in thread
context (where it originated) and ksoftirqd is the only thread for
this context if raised from hardirq. Using the currently running task
instead would "punish" a random task.
- Once ksoftirqd is active it consumes all further softirqs until it
stops running. This changed recently and is no longer the case.
Instead of keeping the backlog NAPI in ksoftirqd (in force-threaded/
PREEMPT_RT setups) I am proposing NAPI-threads for backlog.
The "proper" setup with threaded-NAPI is not doable because the threads
are not pinned to an individual CPU and can be modified by the user.
Additionally a dummy network device would have to be assigned. Also
CPU-hotplug has to be considered if additional CPUs show up.
All this can be probably done/ solved but the smpboot-threads already
provide this infrastructure.
Sending UDP packets over loopback expects that the packet is processed
within the call. Delaying it by handing it over to the thread hurts
performance. It is not beneficial to the outcome if the context switch
happens immediately after enqueue or after a while to process a few
packets in a batch.
There is no need to always use the thread if the backlog NAPI is
requested on the local CPU. This restores the loopback throuput. The
performance drops mostly to the same value after enabling RPS on the
loopback comparing the IPI and the tread result.
Create NAPI-threads for backlog if request during boot. The thread runs
the inner loop from napi_threaded_poll(), the wait part is different. It
checks for NAPI_STATE_SCHED (the backlog NAPI can not be disabled).
The NAPI threads for backlog are optional, it has to be enabled via the boot
argument "thread_backlog_napi". It is mandatory for PREEMPT_RT to avoid the
wakeup of ksoftirqd from the IPI.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A NAPI thread is scheduled by first setting NAPI_STATE_SCHED bit. If
successful (the bit was not yet set) then the NAPI_STATE_SCHED_THREADED
is set but only if thread's state is not TASK_INTERRUPTIBLE (is
TASK_RUNNING) followed by task wakeup.
If the task is idle (TASK_INTERRUPTIBLE) then the
NAPI_STATE_SCHED_THREADED bit is not set. The thread is no relying on
the bit but always leaving the wait-loop after returning from schedule()
because there must have been a wakeup.
The smpboot-threads implementation for per-CPU threads requires an
explicit condition and does not support "if we get out of schedule()
then there must be something to do".
Removing this optimisation simplifies the following integration.
Set NAPI_STATE_SCHED_THREADED unconditionally on wakeup and rely on it
in the wait path by removing the `woken' condition.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We had various syzbot reports about tcp timers firing after
the corresponding netns has been dismantled.
Fortunately Josef Bacik could trigger the issue more often,
and could test a patch I wrote two years ago.
When TCP sockets are closed, we call inet_csk_clear_xmit_timers()
to 'stop' the timers.
inet_csk_clear_xmit_timers() can be called from any context,
including when socket lock is held.
This is the reason it uses sk_stop_timer(), aka del_timer().
This means that ongoing timers might finish much later.
For user sockets, this is fine because each running timer
holds a reference on the socket, and the user socket holds
a reference on the netns.
For kernel sockets, we risk that the netns is freed before
timer can complete, because kernel sockets do not hold
reference on the netns.
This patch adds inet_csk_clear_xmit_timers_sync() function
that using sk_stop_timer_sync() to make sure all timers
are terminated before the kernel socket is released.
Modules using kernel sockets close them in their netns exit()
handler.
Also add sock_not_owned_by_me() helper to get LOCKDEP
support : inet_csk_clear_xmit_timers_sync() must not be called
while socket lock is held.
It is very possible we can revert in the future commit
3a58f13a881e ("net: rds: acquire refcount on TCP sockets")
which attempted to solve the issue in rds only.
(net/smc/af_smc.c and net/mptcp/subflow.c have similar code)
We probably can remove the check_net() tests from
tcp_out_of_resources() and __tcp_close() in the future.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Closes: https://lore.kernel.org/netdev/20240314210740.GA2823176@perftesting/
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a68173691f0 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Link: https://lore.kernel.org/bpf/CANn89i+484ffqb93aQm1N-tjxxvb3WDKX0EbD7318RwRgsatjw@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Josef Bacik <josef@toxicpanda.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20240322135732.1535772-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit e748d0fd66ab ("net: hsr: Disable promiscuous mode in
offload mode") disables promiscuous mode of slave devices
while creating an HSR interface. But while deleting the
HSR interface, it does not take care of it. It decreases the
promiscuous mode count, which eventually enables promiscuous
mode on the slave devices when creating HSR interface again.
Fix this by not decrementing the promiscuous mode count while
deleting the HSR interface when offload is enabled.
Fixes: e748d0fd66ab ("net: hsr: Disable promiscuous mode in offload mode")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk->sk_rcvbuf in __sock_queue_rcv_skb() and __sk_receive_skb() can be
changed by other threads. Mark this as benign using READ_ONCE().
This patch is aimed at reducing the number of benign races reported by
KCSAN in order to focus future debugging effort on harmful races.
Signed-off-by: linke li <lilinke99@qq.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240306183538.88777-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is a big array, but it's only used by software and
need not be contiguous in memory. Use kvcalloc() since
it's so big (order 5 allocation).
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240325150509.9195643699e4.I1b94b17abc809491080d6312f31ce6b5decdd446@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case of restart, we currently reactivate multi-link on
interfaces before reconfiguring keys etc. which means the
drivers need to handle this case differently. Enable more
links later to allow them to handle it the same way.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.d0f18a56335d.Ib3338d93872a4a568f38db0d02546534d3eff810@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If we use a drop we not only save the extra call to
dev_kfree_skb(), but also have a better reason in
tracing, so do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.34daf0a89eb4.I60e0639511f9de64e40e6105b640adf90f8f57f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the links won't actually change, nothing will happen.
This was previously done in the inner function (twice in
some cases), but we shouldn't bother the driver with it.
Clean that up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.a8190a312a27.If4e6f5ce8228eda7afac0fc8c17dd731c5da9ed9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If scan request doesn't include a link ID to be used for TSF
reporting, don't select it as it might become inactive before
scan is actually started by the driver.
Instead, let the driver select one of the active links.
Fixes: cbde0b49f276 ("wifi: mac80211: Extend support for scanning while MLO connected")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.a6b643a15755.Ic28ed9a611432387b7f85e9ca9a97a4ce34a6e0f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have 13 bits for the status_data, so restricting
type to 4 and subdata to 8 bits is confusing, even if
we don't need more bits now. Change subdata mask to
be 9 bits instead, just to make things match up.
If we actually need more types or more subdata bits
we can later also reshuffle the bits between these,
but we should probably keep them at 13 bits together.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.28ac7b665039.I1abbb13e90f016cab552492e05f5cb5b52de6463@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When doing link switch with a disjoint set of links before
and after the switch, we end up removing all channel contexts,
adding new ones later. This looks like 'idle' to the code now,
and we enter idle which also includes flushing queues. But we
can't actually flush since we don't have a link active (bound
to a channel context), and entering idle just to leave it again
is also wrong.
Fix this by passing through an indication that we shouldn't do
any idle checks in this case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320091155.170328bac555.If4a522a9dd3133b91983854b909a4de13aa635da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to activate a link that is currently inactive due to
a negotiated TTLM request, need to first tear down the negotiated
TTLM request.
Add support for sending TTLM teardown request and update the links
state accordingly.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.d480cbf46fcf.Idedad472469d2c27dd2a088cf80a13a1e1cf9b78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a non-TX BSS is included in a per-STA profile, then we cannot set
transmitted_bss for it. Even worse, if we do things properly we should
be configuring both bssid_index and max_bssid_indicator correctly. We do
not actually have both pieces of information (and, some APs currently
do not include either).
So, ignore any per-STA profile where the RNR says that the BSS is not
transmitted. Also fix transmitted_bss to never be set for per-STA
profiles.
This fixes issues where mac80211 was setting the reference BSSID to an
incorrect value.
Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.6a0babed655a.Iad447fea417c63f683da793556b97c31d07a4aab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a verification that the BSSID Index does not exceed the maximum
number of BSSIDs in the Multiple-BSSID set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.a7574d415adc.I02f40c2920a9f602898190679cc27d0c8ee2c67d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is no reason to check the request flags for each of the links, so
pull that out of the loop. Also, within the loop we can set the per-link
error everywhere.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.695faa9be279.I71b11a8d66a9cae4c27e242a47d1d92922609b03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some devices may not be capable of handling puncturing in 5 GHz
only (vs. the current flag that just removes puncturing support
completely). Add a flag to support such devices: check and then
downgrade the channel width if needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.49759510da7d.I12c5a61f0be512e0c4e574c2f794ef4b37ecaf6b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Mark Indoor LPI and Indoor AFC power types as valid based on channel flags.
While on it, added default case.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.091cfaaa5f45.I23cfa1104a16fd4eb9751b3d0d7b158db4ff3ecd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update power_type in bss_conf based on Indoor AFC and LPI power types
received in HE 6 GHz operation element on assoc success.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.89c25dae34ff.Ifd8b2983f400623ac03dc032fc9a20025c9ca365@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Clean up the code here a bit to have only a single call
to ieee80211_chandef_he_6ghz_oper() by using a local
pointer variable for the difference.
Link: https://msgid.link/20240312112048.94c421d767f9.Ia7ca2f315b392c74d39b44fa9eb872a2e62e75c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Current mac80211 won't parsing puncturing bitmap when process EHT
Operation element in 6 GHz band or Bandwidth Indication element. This
leads to puncturing bitmap cannot be updated in related situations, such
as connecting to an EHT AP in 6 GHz band.
So supplement parsing of puncturing bitmap for these elements.
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Link: https://msgid.link/20240312045947.576231-2-quic_kangyang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix ieee80211_ttlm_set_links() to not set all active links,
but instead let the driver know that valid links status changed
and select the active links properly.
Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.acddbbf39584.Ide858f95248fcb3e483c97fcaa14b0cd4e964b10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If prep_channel fails in prep_connection, the code releases
the deflink's chanctx, which is wrong since we may be using
a different link. It's already wrong to even do that always
though, since we might still have the station. Remove it
only if prep_channel succeeded and later updates fail.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.2780c1f08c3d.I033c9b15483933088f32a2c0789612a33dd33d82@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix the order of arguments in the TP_ARGS macro
for the rdev_dump_mpp tracepoint event.
Found by Linux Verification Center (linuxtesting.org).
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://msgid.link/20240311164519.118398-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Wireless extensions are already disabled if MLO is enabled,
given that we cannot support MLO there with all the hard-
coded assumptions about BSSID etc.
However, the WiFi7 ecosystem is still stabilizing, and some
devices may need MLO disabled while that happens. In that
case, we might end up with a device that supports wext (but
not MLO) in one kernel, and then breaks wext in the future
(by enabling MLO), which is not desirable.
Add a flag to let such drivers/devices disable wext even if
MLO isn't yet enabled.
Cc: stable@vger.kernel.org
Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Running kernel-doc on ieee80211_i.h flagged the following:
net/mac80211/ieee80211_i.h:145: warning: expecting prototype for enum ieee80211_corrupt_data_flags. Prototype was for enum ieee80211_bss_corrupt_data_flags instead
net/mac80211/ieee80211_i.h:162: warning: expecting prototype for enum ieee80211_valid_data_flags. Prototype was for enum ieee80211_bss_valid_data_flags instead
Fix these warnings.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240314-kdoc-ieee80211_i-v1-1-72b91b55b257@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When moving a station out of a VLAN and deleting the VLAN afterwards, the
fast_rx entry still holds a pointer to the VLAN's netdev, which can cause
use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx
after the VLAN change.
Cc: stable@vger.kernel.org
Reported-by: ranygh@riseup.net
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240316074336.40442-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make sure that the new mlme_link_id_dbg() macro honours
CONFIG_MAC80211_MLME_DEBUG as intended to avoid spamming the log with
messages like:
wlan0: no EHT support, limiting to HE
wlan0: determined local STA to be HE, BW limited to 160 MHz
wlan0: determined AP xx:xx:xx:xx:xx:xx to be VHT
wlan0: connecting with VHT mode, max bandwidth 160 MHz
Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/20240325085948.26203-1-johan+linaro@kernel.org
Tested-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cited commit started returning an error when user space requests to dump
the interface's IPv6 addresses and IPv6 is disabled on the interface.
Restore the previous behavior and do not return an error.
Before cited commit:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff
inet6 fe80::1852:2ff:fe5a:c26e/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1a:52:02:5a:c2:6e brd ff:ff:ff:ff:ff:ff
After cited commit:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 1e:9b:94:00:ac:e8 brd ff:ff:ff:ff:ff:ff
inet6 fe80::1c9b:94ff:fe00:ace8/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
RTNETLINK answers: No such device
Dump terminated
With this patch:
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff
inet6 fe80::4035:fcff:fe53:66cf/64 scope link proto kernel_ll
valid_lft forever preferred_lft forever
# ip link set dev dummy1 mtu 1000
# ip address show dev dummy1
2: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1000 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 42:35:fc:53:66:cf brd ff:ff:ff:ff:ff:ff
Fixes: 9cc4cc329d30 ("ipv6: use xa_array iterator to implement inet6_dump_addr()")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/netdev/7e261328-42eb-411d-b1b4-ad884eeaae4d@linux.dev/
Tested-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240321173042.2151756-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "*hw_stats_used" value needs to be set on the success paths to prevent
an uninitialized variable bug in the caller, nla_put_nh_group_stats().
Fixes: 5072ae00aea4 ("net: nexthop: Expose nexthop group HW stats to user space")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/f08ac289-d57f-4a1a-830f-cf9a0563cb9c@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Scott reports an occasional scatterlist BUG that is triggered by the
RFC 8009 Kunit test, then says:
> Looking through the git history of the auth_gss code, there are various
> places where static buffers were replaced by dynamically allocated ones
> because they're being used with scatterlists.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 561141dd4943 ("SUNRPC: Use a static buffer for the checksum initialization vector")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
syzbot reported the following uninit-value access issue [1][2]:
nci_rx_work() parses and processes received packet. When the payload
length is zero, each message type handler reads uninitialized payload
and KMSAN detects this issue. The receipt of a packet with a zero-size
payload is considered unexpected, and therefore, such packets should be
silently discarded.
This patch resolved this issue by checking payload size before calling
each message type handler codes.
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reported-and-tested-by: syzbot+7ea9413ea6749baf5574@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+29b5ca705d2e0f4a44d2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7ea9413ea6749baf5574 [1]
Closes: https://syzkaller.appspot.com/bug?extid=29b5ca705d2e0f4a44d2 [2]
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Jeremy Cline <jeremy@jcline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. There is a
larger batch of fixes still pending that will follow up asap, this is
what I deemed to be more urgent at this time:
1) Use clone view in pipapo set backend to release elements from destroy
path, otherwise it is possible to destroy elements twice.
2) Incorrect check for internal table flags lead to bogus transaction
objects.
3) Fix counters memleak in netdev basechain update error path,
from Quan Tian.
netfilter pull request 24-03-21
* tag 'nf-24-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
====================
Link: https://lore.kernel.org/r/20240321112117.36737-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If nft_netdev_register_hooks() fails, the memory associated with
nft_stats is not freed, causing a memory leak.
This patch fixes it by moving nft_stats_alloc() down after
nft_netdev_register_hooks() succeeds.
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Quan Tian <tianquan23@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
NAPI threads can keep polling packets under load. Currently it is only
calling cond_resched() before repolling, but it is not sufficient to
clear out the holdout of RCU tasks, which prevent BPF tracing programs
from detaching for long period. This can be reproduced easily with
following set up:
ip netns add test1
ip netns add test2
ip -n test1 link add veth1 type veth peer name veth2 netns test2
ip -n test1 link set veth1 up
ip -n test1 link set lo up
ip -n test2 link set veth2 up
ip -n test2 link set lo up
ip -n test1 addr add 192.168.1.2/31 dev veth1
ip -n test1 addr add 1.1.1.1/32 dev lo
ip -n test2 addr add 192.168.1.3/31 dev veth2
ip -n test2 addr add 2.2.2.2/31 dev lo
ip -n test1 route add default via 192.168.1.3
ip -n test2 route add default via 192.168.1.2
for i in `seq 10 210`; do
for j in `seq 10 210`; do
ip netns exec test2 iptables -I INPUT -s 3.3.$i.$j -p udp --dport 5201
done
done
ip netns exec test2 ethtool -K veth2 gro on
ip netns exec test2 bash -c 'echo 1 > /sys/class/net/veth2/threaded'
ip netns exec test1 ethtool -K veth1 tso off
Then run an iperf3 client/server and a bpftrace script can trigger it:
ip netns exec test2 iperf3 -s -B 2.2.2.2 >/dev/null&
ip netns exec test1 iperf3 -c 2.2.2.2 -B 1.1.1.1 -u -l 1500 -b 3g -t 100 >/dev/null&
bpftrace -e 'kfunc:__napi_poll{@=count();} interval:s:1{exit();}'
Report RCU quiescent states periodically will resolve the issue.
Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/4c3b0d3f32d3b18949d75b18e5e1d9f13a24f025.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Restore skipping transaction if table update does not modify flags.
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Clone already always provides a current view of the lookup table, use it
to destroy the set, otherwise it is possible to destroy elements twice.
This fix requires:
212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol")
which came after:
9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path").
Fixes: 9827a0e6e23b ("netfilter: nft_set_pipapo: release elements in clone from abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-19
1) Fix possible page_pool leak triggered by esp_output.
From Dragos Tatulea.
2) Fix UDP encapsulation in software GSO path.
From Leon Romanovsky.
* tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Allow UDP encapsulation only in offload modes
net: esp: fix bad handling of pages from page_pool
====================
Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d96 ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller reported a read of uninit req->syncookie. [0]
Originally, req->syncookie was used only in tcp_conn_request()
to indicate if we need to encode SYN cookie in SYN+ACK, so the
field remains uninitialised in other places.
The commit 695751e31a63 ("bpf: tcp: Handle BPF SYN Cookie in
cookie_v[46]_check().") added another meaning in ACK path;
req->syncookie is set true if SYN cookie is validated by BPF
kfunc.
After the change, cookie_v[46]_check() always read req->syncookie,
but it is not initialised in the normal SYN cookie case as reported
by KMSAN.
Let's make sure we always initialise req->syncookie in reqsk_alloc().
[0]:
BUG: KMSAN: uninit-value in cookie_v4_check+0x22b7/0x29e0
net/ipv4/syncookies.c:477
cookie_v4_check+0x22b7/0x29e0 net/ipv4/syncookies.c:477
tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5538 [inline]
__netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
process_backlog+0x480/0x8b0 net/core/dev.c:5981
__napi_poll+0xe7/0x980 net/core/dev.c:6632
napi_poll net/core/dev.c:6701 [inline]
net_rx_action+0x89d/0x1820 net/core/dev.c:6813
__do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
do_softirq+0x9a/0x100 kernel/softirq.c:455
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
__dev_queue_xmit+0x2776/0x52c0 net/core/dev.c:4362
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0x187a/0x1b70 net/ipv4/ip_output.c:235
__ip_finish_output+0x287/0x810
ip_finish_output+0x4b/0x550 net/ipv4/ip_output.c:323
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:450 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1e93/0x2030 net/ipv4/ip_output.c:535
ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:549
__tcp_transmit_skb+0x3c70/0x4890 net/ipv4/tcp_output.c:1462
tcp_transmit_skb net/ipv4/tcp_output.c:1480 [inline]
tcp_write_xmit+0x3ee1/0x8900 net/ipv4/tcp_output.c:2792
__tcp_push_pending_frames net/ipv4/tcp_output.c:2977 [inline]
tcp_send_fin+0xa90/0x12e0 net/ipv4/tcp_output.c:3578
tcp_shutdown+0x198/0x1f0 net/ipv4/tcp.c:2716
inet_shutdown+0x33f/0x5b0 net/ipv4/af_inet.c:923
__sys_shutdown_sock net/socket.c:2425 [inline]
__sys_shutdown net/socket.c:2437 [inline]
__do_sys_shutdown net/socket.c:2445 [inline]
__se_sys_shutdown+0x2a4/0x440 net/socket.c:2443
__x64_sys_shutdown+0x6c/0xa0 net/socket.c:2443
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was stored to memory at:
reqsk_alloc include/net/request_sock.h:148 [inline]
inet_reqsk_alloc+0x651/0x7a0 net/ipv4/tcp_input.c:6978
cookie_tcp_reqsk_alloc+0xd4/0x900 net/ipv4/syncookies.c:328
cookie_tcp_check net/ipv4/syncookies.c:388 [inline]
cookie_v4_check+0x289f/0x29e0 net/ipv4/syncookies.c:420
tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5538 [inline]
__netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
process_backlog+0x480/0x8b0 net/core/dev.c:5981
__napi_poll+0xe7/0x980 net/core/dev.c:6632
napi_poll net/core/dev.c:6701 [inline]
net_rx_action+0x89d/0x1820 net/core/dev.c:6813
__do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
Uninit was created at:
__alloc_pages+0x9a7/0xe00 mm/page_alloc.c:4592
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
alloc_slab_page mm/slub.c:2175 [inline]
allocate_slab mm/slub.c:2338 [inline]
new_slab+0x2de/0x1400 mm/slub.c:2391
___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
__slab_alloc mm/slub.c:3610 [inline]
__slab_alloc_node mm/slub.c:3663 [inline]
slab_alloc_node mm/slub.c:3835 [inline]
kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
reqsk_alloc include/net/request_sock.h:131 [inline]
inet_reqsk_alloc+0x66/0x7a0 net/ipv4/tcp_input.c:6978
tcp_conn_request+0x484/0x44e0 net/ipv4/tcp_input.c:7135
tcp_v4_conn_request+0x16f/0x1d0 net/ipv4/tcp_ipv4.c:1716
tcp_rcv_state_process+0x2e5/0x4bb0 net/ipv4/tcp_input.c:6655
tcp_v4_do_rcv+0xbfd/0x10b0 net/ipv4/tcp_ipv4.c:1929
tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:460 [inline]
ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:639
ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:674
__netif_receive_skb_list_ptype net/core/dev.c:5581 [inline]
__netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5629
__netif_receive_skb_list net/core/dev.c:5681 [inline]
netif_receive_skb_list_internal+0x106c/0x16f0 net/core/dev.c:5773
gro_normal_list include/net/gro.h:438 [inline]
napi_complete_done+0x425/0x880 net/core/dev.c:6113
virtqueue_napi_complete drivers/net/virtio_net.c:465 [inline]
virtnet_poll+0x149d/0x2240 drivers/net/virtio_net.c:2211
__napi_poll+0xe7/0x980 net/core/dev.c:6632
napi_poll net/core/dev.c:6701 [inline]
net_rx_action+0x89d/0x1820 net/core/dev.c:6813
__do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
CPU: 0 PID: 16792 Comm: syz-executor.2 Not tainted 6.8.0-syzkaller-05562-g61387b8dcf1d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: 695751e31a63 ("bpf: tcp: Handle BPF SYN Cookie in cookie_v[46]_check().")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/bpf/CANn89iKdN9c+C_2JAUbc+VY3DDQjAQukMtiBbormAmAk9CdvQA@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240315224710.55209-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently bpf_get_current_pid_tgid() is allowed in tracing, cgroup
and sk_msg progs while bpf_get_ns_current_pid_tgid() is only allowed
in tracing progs.
We have an internal use case where for an application running
in a container (with pid namespace), user wants to get
the pid associated with the pid namespace in a cgroup bpf
program. Currently, cgroup bpf progs already allow
bpf_get_current_pid_tgid(). Let us allow bpf_get_ns_current_pid_tgid()
as well.
With auditing the code, bpf_get_current_pid_tgid() is also used
by sk_msg prog. But there are no side effect to expose these two
helpers to all prog types since they do not reveal any kernel specific
data. The detailed discussion is in [1].
So with this patch, both bpf_get_current_pid_tgid() and bpf_get_ns_current_pid_tgid()
are put in bpf_base_func_proto(), making them available to all
program types.
[1] https://lore.kernel.org/bpf/20240307232659.1115872-1-yonghong.song@linux.dev/
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184854.2975190-1-yonghong.song@linux.dev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Add new bitwise types and helper functions and use them in s390
specific drivers and code to make it easier to find virtual vs
physical address usage bugs.
Right now virtual and physical addresses are identical for s390,
except for module, vmalloc, and similar areas. This will be changed,
hopefully with the next merge window, so that e.g. the kernel image
and modules will be located close to each other, allowing for direct
branches and also for some other simplifications.
As a prerequisite this requires to fix all misuses of virtual and
physical addresses. As it turned out people are so used to the
concept that virtual and physical addresses are the same, that new
bugs got added to code which was already fixed. In order to avoid
that even more code gets merged which adds such bugs add and use new
bitwise types, so that sparse can be used to find such usage bugs.
Most likely the new types can go away again after some time
- Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
- Fix kprobe branch handling: if an out-of-line single stepped relative
branch instruction has a target address within a certain address area
in the entry code, the program check handler may incorrectly execute
cleanup code as if KVM code was executed, leading to crashes
- Fix reference counting of zcrypt card objects
- Various other small fixes and cleanups
* tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/entry: compare gmap asce to determine guest/host fault
s390/entry: remove OUTSIDE macro
s390/entry: add CIF_SIE flag and remove sie64a() address check
s390/cio: use while (i--) pattern to clean up
s390/raw3270: make class3270 constant
s390/raw3270: improve raw3270_init() readability
s390/tape: make tape_class constant
s390/vmlogrdr: make vmlogrdr_class constant
s390/vmur: make vmur_class constant
s390/zcrypt: make zcrypt_class constant
s390/mm: provide simple ARCH_HAS_DEBUG_VIRTUAL support
s390/vfio_ccw_cp: use new address translation helpers
s390/iucv: use new address translation helpers
s390/ctcm: use new address translation helpers
s390/lcs: use new address translation helpers
s390/qeth: use new address translation helpers
s390/zfcp: use new address translation helpers
s390/tape: fix virtual vs physical address confusion
s390/3270: use new address translation helpers
s390/3215: use new address translation helpers
...
|
|
The commit 2c15a5aee2f3 ("net/sched: Load modules via their alias")
starts loading modules via aliases and not canonical names. The new
aliases were added in commit 241a94abcf46 ("net/sched: Add module
aliases for cls_,sch_,act_ modules") via a Coccinele script.
sch_fq_pie.c is missing module.h header and thus Coccinele did not patch
it. Add the include and module alias manually, so that autoloading works
for sch_fq_pie too.
(Note: commit message in commit 241a94abcf46 ("net/sched: Add module
aliases for cls_,sch_,act_ modules") was mangled due to '#'
misinterpretation. The predicate haskernel is:
| @ haskernel @
| @@
|
| #include <linux/module.h>
|
.)
Fixes: 241a94abcf46 ("net/sched: Add module aliases for cls_,sch_,act_ modules")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20240315160210.8379-1-mkoutny@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since the referenced commit, the xfrm_inner_extract_output() function
uses the protocol field to determine the address family. So not setting
it for IPv4 raw sockets meant that such packets couldn't be tunneled via
IPsec anymore.
IPv6 raw sockets are not affected as they already set the protocol since
9c9c9ad5fae7 ("ipv6: set skb->protocol on tcp, raw and ip6_append_data
genereated skbs").
Fixes: f4796398f21b ("xfrm: Remove inner/outer modes from output path")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/c5d9a947-eb19-4164-ac99-468ea814ce20@strongswan.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A failure during registration of the netdev notifier was not handled at
all. A failure during netlink initialization did not unregister the netdev
notifier.
Handle failures of netdev notifier registration and netlink initialization.
Both functions should only return negative values on failure and thereby
lead to the hsr module not being loaded.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/3ce097c15e3f7ace98fc7fd9bcbf299f092e63d1.1710504184.git.fmaurer@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
acquire/release_in_xmit() work as bit lock in rds_send_xmit(), so they
are expected to ensure acquire/release memory ordering semantics.
However, test_and_set_bit/clear_bit() don't imply such semantics, on
top of this, following smp_mb__after_atomic() does not guarantee release
ordering (memory barrier actually should be placed before clear_bit()).
Instead, we use clear_bit_unlock/test_and_set_bit_lock() here.
Fixes: 0f4b1c7e89e6 ("rds: fix rds_send_xmit() serialization")
Fixes: 1f9ecd7eacfd ("RDS: Pass rds_conn_path to rds_send_xmit()")
Signed-off-by: Yewon Choi <woni9911@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/ZfQUxnNTO9AJmzwc@libra05
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
dev->state can be read in rx and tx fast paths.
netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit() [TX path]
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
