summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2024-07-31net/smc: remove redundant code in smc_connect_check_aclcZhengchao Shao
When the SMC client perform CLC handshake, it will check whether the clc header type is correct in receiving SMC_CLC_ACCEPT packet. The specific invoking path is as follows: __smc_connect smc_connect_clc smc_clc_wait_msg smc_clc_msg_hdr_valid smc_clc_msg_acc_conf_valid Therefore, the smc_connect_check_aclc interface invoked by __smc_connect does not need to check type again. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31net/smc: remove the fallback in __smc_connectZhengchao Shao
When the SMC client begins to connect to server, smcd_version is set to SMC_V1 + SMC_V2. If fail to get VLAN ID, only SMC_V2 information is left in smcd_version. And smcd_version will not be changed to 0. Therefore, remove the fallback caused by the failure to get VLAN ID. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31net/smc: remove unreferenced header in smc_loopback.h fileZhengchao Shao
Because linux/err.h is unreferenced in smc_loopback.h file, so remove it. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: use pre_exit pernet hook to avoid rcu_barrierJames Chapman
Move the work of closing all tunnels from the pernet exit hook to pre_exit since the core does rcu synchronisation between these steps and we can therefore remove rcu_barrier from l2tp code. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: cleanup eth/ppp pseudowire setup codeJames Chapman
l2tp eth/ppp pseudowire setup/cleanup uses kfree() in some error paths. Drop the refcount instead such that the session object is always freed when the refcount reaches 0. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: add idr consistency check in session_registerJames Chapman
l2tp_session_register uses an idr_alloc then idr_replace pattern to insert sessions into the session IDR. To catch invalid locking, add a WARN_ON_ONCE if the IDR entry is modified by another thread between alloc and replace steps. Also add comments to make expectations clear. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: use rcu list add/del when updating listsJames Chapman
l2tp_v3_session_htable and tunnel->session_list are read by lockless getters using RCU. Use rcu list variants when adding or removing list items. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: prevent possible tunnel refcount underflowJames Chapman
When a session is created, it sets a backpointer to its tunnel. When the session refcount drops to 0, l2tp_session_free drops the tunnel refcount if session->tunnel is non-NULL. However, session->tunnel is set in l2tp_session_create, before the tunnel refcount is incremented by l2tp_session_register, which leaves a small window where session->tunnel is non-NULL when the tunnel refcount hasn't been bumped. Moving the assignment to l2tp_session_register is trivial but l2tp_session_create calls l2tp_session_set_header_len which uses session->tunnel to get the tunnel's encap. Add an encap arg to l2tp_session_set_header_len to avoid using session->tunnel. If l2tpv3 sessions have colliding IDs, it is possible for l2tp_v3_session_get to race with l2tp_session_register and fetch a session which doesn't yet have session->tunnel set. Add a check for this case. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: refactor ppp socket/session relationshipJames Chapman
Each l2tp ppp session has an associated pppox socket. l2tp_ppp uses the session's pppox socket refcount to manage session lifetimes; the pppox socket holds a ref on the session which is dropped by the socket destructor. This complicates session cleanup. Given l2tp sessions are refcounted, it makes more sense to reverse this relationship such that the session keeps the socket alive, not the other way around. So refactor l2tp_ppp to have the session hold a ref on its socket while it references it. When the session is closed, it drops its socket ref when it detaches from its socket. If the socket is closed first, it initiates the closing of its session, if one is attached. The socket/session can then be freed asynchronously when their refcounts drop to 0. Use the session's session_close callback to detach the pppox socket since this will be done on the work queue together with the rest of the session cleanup via l2tp_session_delete. Also, since l2tp_ppp uses the pppox socket's sk_user_data, use the rcu sk_user_data access helpers when accessing it and set the socket's SOCK_RCU_FREE flag to have pppox sockets freed by rcu. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: free sessions using rcuJames Chapman
l2tp sessions may be accessed under an rcu read lock. Have them freed via rcu and remove the now unneeded synchronize_rcu when a session is removed. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: delete sessions using work queueJames Chapman
When a tunnel is closed, l2tp_tunnel_closeall closes all sessions in the tunnel. Move the work of deleting each session to the work queue so that sessions are deleted using the same codepath whether they are closed by user API request or their parent tunnel is closing. This also avoids the locking dance in l2tp_tunnel_closeall where the tunnel's session list lock was unlocked and relocked in the loop. In l2tp_exit_net, use drain_workqueue instead of flush_workqueue because the processing of tunnel_delete work may queue session_delete work items which must also be processed. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: simplify tunnel and socket cleanupJames Chapman
When the l2tp tunnel socket used sk_user_data to point to its associated l2tp tunnel, socket and tunnel cleanup had to make use of the socket's destructor to free the tunnel only when the socket could no longer be accessed. Now that sk_user_data is no longer used, we can simplify socket and tunnel cleanup: * If the tunnel closes first, it cleans up and drops its socket ref when the tunnel refcount drops to zero. If its socket was provided by userspace, the socket is closed and freed asynchronously, when userspace closes it. If its socket is a kernel socket, the tunnel closes the socket itself during cleanup and drops its socket ref when the tunnel's refcount drops to zero. * If the socket closes first, we initiate the closing of its associated tunnel. For UDP sockets, this is via the socket's encap_destroy hook. For L2TPIP sockets, this is via the socket's destroy callback. The tunnel holds a socket ref while it references the sock. When the tunnel is freed, it drops its socket ref and the socket will be cleaned up when its own refcount drops to zero, asynchronous to the tunnel free. * The tunnel socket destructor is no longer needed since the tunnel is no longer freed through the socket destructor. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: remove unused tunnel magic fieldJames Chapman
Since l2tp no longer derives tunnel pointers directly via sk_user_data, it is no longer useful for l2tp to check tunnel pointers using a magic feather. Drop the tunnel's magic field. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: don't set sk_user_data in tunnel socketJames Chapman
l2tp no longer uses the tunnel socket's sk_user_data so drop the code which sets it. In l2tp_validate_socket use l2tp_sk_to_tunnel to check whether a given socket is already attached to an l2tp tunnel since we can no longer use non-null sk_user_data to indicate this. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: don't use tunnel socket sk_user_data in ppp procfs outputJames Chapman
l2tp's ppp procfs output can be used to show internal state of pppol2tp. It includes a 'user-data-ok' field, which is derived from the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock being non-NULL to indicate this instead. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: have l2tp_ip_destroy_sock use ip_flush_pending_framesJames Chapman
Use the recently exported ip_flush_pending_frames instead of a free-coded version and lock the socket while we call it. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31ipv4: export ip_flush_pending_framesJames Chapman
To avoid protocol modules implementing their own, export ip_flush_pending_frames. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-31l2tp: lookup tunnel from socket without using sk_user_dataJames Chapman
l2tp_sk_to_tunnel derives the tunnel from sk_user_data. Instead, lookup the tunnel by walking the tunnel IDR for a tunnel using the indicated sock. This is slow but l2tp_sk_to_tunnel is not used in the datapath so performance isn't critical. l2tp_tunnel_destruct needs a variant of l2tp_sk_to_tunnel which does not bump the tunnel refcount since the tunnel refcount is already 0. Change l2tp_sk_to_tunnel sk arg to const since it does not modify sk. Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-30net/tcp: Expand goo.gl linkDr. David Alan Gilbert
The goo.gl URL shortener is deprecated and is due to stop expanding existing links in 2025. Expand the link in Kconfig. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240729205337.48058-1-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net: drop bad gso csum_start and offset in virtio_net_hdrWillem de Bruijn
Tighten csum_start and csum_offset checks in virtio_net_hdr_to_skb for GSO packets. The function already checks that a checksum requested with VIRTIO_NET_HDR_F_NEEDS_CSUM is in skb linear. But for GSO packets this might not hold for segs after segmentation. Syzkaller demonstrated to reach this warning in skb_checksum_help offset = skb_checksum_start_offset(skb); ret = -EINVAL; if (WARN_ON_ONCE(offset >= skb_headlen(skb))) By injecting a TSO packet: WARNING: CPU: 1 PID: 3539 at net/core/dev.c:3284 skb_checksum_help+0x3d0/0x5b0 ip_do_fragment+0x209/0x1b20 net/ipv4/ip_output.c:774 ip_finish_output_gso net/ipv4/ip_output.c:279 [inline] __ip_finish_output+0x2bd/0x4b0 net/ipv4/ip_output.c:301 iptunnel_xmit+0x50c/0x930 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x2296/0x2c70 net/ipv4/ip_tunnel.c:813 __gre_xmit net/ipv4/ip_gre.c:469 [inline] ipgre_xmit+0x759/0xa60 net/ipv4/ip_gre.c:661 __netdev_start_xmit include/linux/netdevice.h:4850 [inline] netdev_start_xmit include/linux/netdevice.h:4864 [inline] xmit_one net/core/dev.c:3595 [inline] dev_hard_start_xmit+0x261/0x8c0 net/core/dev.c:3611 __dev_queue_xmit+0x1b97/0x3c90 net/core/dev.c:4261 packet_snd net/packet/af_packet.c:3073 [inline] The geometry of the bad input packet at tcp_gso_segment: [ 52.003050][ T8403] skb len=12202 headroom=244 headlen=12093 tailroom=0 [ 52.003050][ T8403] mac=(168,24) mac_len=24 net=(192,52) trans=244 [ 52.003050][ T8403] shinfo(txflags=0 nr_frags=1 gso(size=1552 type=3 segs=0)) [ 52.003050][ T8403] csum(0x60000c7 start=199 offset=1536 ip_summed=3 complete_sw=0 valid=0 level=0) Mitigate with stricter input validation. csum_offset: for GSO packets, deduce the correct value from gso_type. This is already done for USO. Extend it to TSO. Let UFO be: udp[46]_ufo_fragment ignores these fields and always computes the checksum in software. csum_start: finding the real offset requires parsing to the transport header. Do not add a parser, use existing segmentation parsing. Thanks to SKB_GSO_DODGY, that also catches bad packets that are hw offloaded. Again test both TSO and USO. Do not test UFO for the above reason, and do not test UDP tunnel offload. GSO packet are almost always CHECKSUM_PARTIAL. USO packets may be CHECKSUM_NONE since commit 10154dbded6d6 ("udp: Allow GSO transmit from devices with no checksum offload"), but then still these fields are initialized correctly in udp4_hwcsum/udp6_hwcsum_outgoing. So no need to test for ip_summed == CHECKSUM_PARTIAL first. This revises an existing fix mentioned in the Fixes tag, which broke small packets with GSO offload, as detected by kselftests. Link: https://syzkaller.appspot.com/bug?extid=e1db31216c789f552871 Link: https://lore.kernel.org/netdev/20240723223109.2196886-1-kuba@kernel.org Fixes: e269d79c7d35 ("net: missing check virtio") Cc: stable@vger.kernel.org Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240729201108.1615114-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-30net/iucv: fix use after free in iucv_sock_close()Alexandra Winter
iucv_sever_path() is called from process context and from bh context. iucv->path is used as indicator whether somebody else is taking care of severing the path (or it is already removed / never existed). This needs to be done with atomic compare and swap, otherwise there is a small window where iucv_sock_close() will try to work with a path that has already been severed and freed by iucv_callback_connrej() called by iucv_tasklet_fn(). Example: [452744.123844] Call Trace: [452744.123845] ([<0000001e87f03880>] 0x1e87f03880) [452744.123966] [<00000000d593001e>] iucv_path_sever+0x96/0x138 [452744.124330] [<000003ff801ddbca>] iucv_sever_path+0xc2/0xd0 [af_iucv] [452744.124336] [<000003ff801e01b6>] iucv_sock_close+0xa6/0x310 [af_iucv] [452744.124341] [<000003ff801e08cc>] iucv_sock_release+0x3c/0xd0 [af_iucv] [452744.124345] [<00000000d574794e>] __sock_release+0x5e/0xe8 [452744.124815] [<00000000d5747a0c>] sock_close+0x34/0x48 [452744.124820] [<00000000d5421642>] __fput+0xba/0x268 [452744.124826] [<00000000d51b382c>] task_work_run+0xbc/0xf0 [452744.124832] [<00000000d5145710>] do_notify_resume+0x88/0x90 [452744.124841] [<00000000d5978096>] system_call+0xe2/0x2c8 [452744.125319] Last Breaking-Event-Address: [452744.125321] [<00000000d5930018>] iucv_path_sever+0x90/0x138 [452744.125324] [452744.125325] Kernel panic - not syncing: Fatal exception in interrupt Note that bh_lock_sock() is not serializing the tasklet context against process context, because the check for sock_owned_by_user() and corresponding handling is missing. Ideas for a future clean-up patch: A) Correct usage of bh_lock_sock() in tasklet context, as described in Link: https://lore.kernel.org/netdev/1280155406.2899.407.camel@edumazet-laptop/ Re-enqueue, if needed. This may require adding return values to the tasklet functions and thus changes to all users of iucv. B) Change iucv tasklet into worker and use only lock_sock() in af_iucv. Fixes: 7d316b945352 ("af_iucv: remove IUCV-pathes completely") Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20240729122818.947756-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30net/smc: prevent UAF in inet_create()D. Wythe
Following syzbot repro crashes the kernel: socketpair(0x2, 0x1, 0x100, &(0x7f0000000140)) (fail_nth: 13) Fix this by not calling sk_common_release() from smc_create_clcsk(). Stack trace: socket: no more sockets ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 5092 at lib/refcount.c:28 refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 5092 Comm: syz-executor424 Not tainted 6.10.0-syzkaller-04483-g0be9ae5486cd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 RIP: 0010:refcount_warn_saturate+0x15a/0x1d0 lib/refcount.c:28 Code: 80 f3 1f 8c e8 e7 69 a8 fc 90 0f 0b 90 90 eb 99 e8 cb 4f e6 fc c6 05 8a 8d e8 0a 01 90 48 c7 c7 e0 f3 1f 8c e8 c7 69 a8 fc 90 <0f> 0b 90 90 e9 76 ff ff ff e8 a8 4f e6 fc c6 05 64 8d e8 0a 01 90 RSP: 0018:ffffc900034cfcf0 EFLAGS: 00010246 RAX: 3b9fcde1c862f700 RBX: ffff888022918b80 RCX: ffff88807b39bc00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000003 R08: ffffffff815878a2 R09: fffffbfff1c39d94 R10: dffffc0000000000 R11: fffffbfff1c39d94 R12: 00000000ffffffe9 R13: 1ffff11004523165 R14: ffff888022918b28 R15: ffff888022918b00 FS: 00005555870e7380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 000000007582e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> inet_create+0xbaf/0xe70 __sock_create+0x490/0x920 net/socket.c:1571 sock_create net/socket.c:1622 [inline] __sys_socketpair+0x2ca/0x720 net/socket.c:1769 __do_sys_socketpair net/socket.c:1822 [inline] __se_sys_socketpair net/socket.c:1819 [inline] __x64_sys_socketpair+0x9b/0xb0 net/socket.c:1819 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbcb9259669 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 a1 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffe931c6d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 00007fffe931c6f0 RCX: 00007fbcb9259669 RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000002 RBP: 0000000000000002 R08: 00007fffe931c476 R09: 00000000000000a0 R10: 0000000020000140 R11: 0000000000000246 R12: 00007fffe931c6ec R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001 </TASK> Link: https://lore.kernel.org/r/20240723175809.537291-1-edumazet@google.com/ Fixes: d25a92ccae6b ("net/smc: Introduce IPPROTO_SMC") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://patch.msgid.link/1722224415-30999-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: pm: fix backup support in signal endpointsMatthieu Baerts (NGI0)
There was a support for signal endpoints, but only when the endpoint's flag was changed during a connection. If an endpoint with the signal and backup was already present, the MP_JOIN reply was not containing the backup flag as expected. That's confusing to have this inconsistent behaviour. On the other hand, the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was already there, it was just never set before. Now when requesting the local ID from the path-manager, the backup status is also requested. Note that when the userspace PM is used, the backup flag can be set if the local address was already used before with a backup flag, e.g. if the address was announced with the 'backup' flag, or a subflow was created with the 'backup' flag. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: mib: count MPJ with backup flagMatthieu Baerts (NGI0)
Without such counters, it is difficult to easily debug issues with MPJ not having the backup flags on production servers. This is not strictly a fix, but it eases to validate the following patches without requiring to take packet traces, to query ongoing connections with Netlink with admin permissions, or to guess by looking at the behaviour of the packet scheduler. Also, the modification is self contained, isolated, well controlled, and the increments are done just after others, there from the beginning. It looks then safe, and helpful to backport this. Fixes: 4596a2c1b7f5 ("mptcp: allow creating non-backup subflows") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: pm: only set request_bkup flag when sending MP_PRIOMatthieu Baerts (NGI0)
The 'backup' flag from mptcp_subflow_context structure is supposed to be set only when the other peer flagged a subflow as backup, not the opposite. Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: distinguish rcv vs sent backup flag in requestsMatthieu Baerts (NGI0)
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow as 'backup' by setting the flag with the same name. Before this patch, the backup was set if the other peer set it in its MP_JOIN + SYN request. It is not correct: the backup flag should be set in the MPJ+SYN+ACK only if the host asks for it, and not mirroring what was done by the other peer. It is then required to have a dedicated bit for each direction, similar to what is done in the subflow context. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-30mptcp: sched: check both directions for backupMatthieu Baerts (NGI0)
The 'mptcp_subflow_context' structure has two items related to the backup flags: - 'backup': the subflow has been marked as backup by the other peer - 'request_bkup': the backup flag has been set by the host Before this patch, the scheduler was only looking at the 'backup' flag. That can make sense in some cases, but it looks like that's not what we wanted for the general use, because either the path-manager was setting both of them when sending an MP_PRIO, or the receiver was duplicating the 'backup' flag in the subflow request. Note that the use of these two flags in the path-manager are going to be fixed in the next commits, but this change here is needed not to modify the behaviour. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-29mptcp: fix NL PM announced address accountingPaolo Abeni
Currently the per connection announced address counter is never decreased. As a consequence, after connection establishment, if the NL PM deletes an endpoint and adds a new/different one, no additional subflow is created for the new endpoint even if the current limits allow that. Address the issue properly updating the signaled address counter every time the NL PM removes such addresses. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29mptcp: fix user-space PM announced address accountingPaolo Abeni
Currently the per-connection announced address counter is never decreased. When the user-space PM is in use, this just affect the information exposed via diag/sockopt, but it could still foul the PM to wrong decision. Add the missing accounting for the user-space PM's sake. Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29rtnetlink: Don't ignore IFLA_TARGET_NETNSID when ifname is specified in ↵Kuniyuki Iwashima
rtnl_dellink(). The cited commit accidentally replaced tgt_net with net in rtnl_dellink(). As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified with IFLA_IFNAME or IFLA_ALT_IFNAME. Let's pass tgt_net to rtnl_dev_get(). Fixes: cc6090e985d7 ("net: rtnetlink: introduce helper to get net_device instance by ifname") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29tcp: Adjust clamping window for applications specifying SO_RCVBUFSubash Abhinov Kasiviswanathan
tp->scaling_ratio is not updated based on skb->len/skb->truesize once SO_RCVBUF is set leading to the maximum window scaling to be 25% of rcvbuf after commit dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") and 50% of rcvbuf after commit 697a6c8cec03 ("tcp: increase the default TCP scaling ratio"). 50% tries to emulate the behavior of older kernels using sysctl_tcp_adv_win_scale with default value. Systems which were using a different values of sysctl_tcp_adv_win_scale in older kernels ended up seeing reduced download speeds in certain cases as covered in https://lists.openwall.net/netdev/2024/05/15/13 While the sysctl scheme is no longer acceptable, the value of 50% is a bit conservative when the skb->len/skb->truesize ratio is later determined to be ~0.66. Applications not specifying SO_RCVBUF update the window scaling and the receiver buffer every time data is copied to userspace. This computation is now used for applications setting SO_RCVBUF to update the maximum window scaling while ensuring that the receive buffer is within the application specified limit. Fixes: dfa2f0483360 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29ethtool: fix the state of additional contexts with old APIJakub Kicinski
We expect drivers implementing the new create/modify/destroy API to populate the defaults in struct ethtool_rxfh_context. In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key are NULL so drivers can't give us defaults even if they want to. Call get_rxfh() to fetch the values. We can reuse rxfh_dev for the get_rxfh(), rxfh stores the input from the user. This fixes IOCTL reporting 0s instead of the default key / indir table for drivers using legacy API. Add a check to try to catch drivers using the new API but not populating the key. Fixes: 7964e7884643 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29ethtool: fix setting key and resetting indir at onceJakub Kicinski
The indirection table and the key follow struct ethtool_rxfh in user memory. To reset the indirection table user space calls SET_RXFH with table of size 0 (OTOH to say "no change" it should use -1 / ~0). The logic for calculating the offset where they key sits is incorrect in this case, as kernel would still offset by the full table length, while for the reset there is no indir table and key is immediately after the struct. $ ethtool -X eth0 default hkey 01:02:03... $ ethtool -x eth0 [...] RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 [...] Fixes: 3de0b592394d ("ethtool: Support for configurable RSS hash key") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-29tun: Add missing bpf_net_ctx_clear() in do_xdp_generic()Jeongjun Park
There are cases where do_xdp_generic returns bpf_net_context without clearing it. This causes various memory corruptions, so the missing bpf_net_ctx_clear must be added. Reported-by: syzbot+44623300f057a28baf1e@syzkaller.appspotmail.com Fixes: fecef4cd42c6 ("tun: Assign missing bpf_net_context.") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reported-by: syzbot+3c2b6d5d4bec3b904933@syzkaller.appspotmail.com Reported-by: syzbot+707d98c8649695eaf329@syzkaller.appspotmail.com Reported-by: syzbot+c226757eb784a9da3e8b@syzkaller.appspotmail.com Reported-by: syzbot+61a1cfc2b6632363d319@syzkaller.appspotmail.com Reported-by: syzbot+709e4c85c904bcd62735@syzkaller.appspotmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-28minmax: add a few more MIN_T/MAX_T usersLinus Torvalds
Commit 3a7e02c040b1 ("minmax: avoid overly complicated constant expressions in VM code") added the simpler MIN_T/MAX_T macros in order to avoid some excessive expansion from the rather complicated regular min/max macros. The complexity of those macros stems from two issues: (a) trying to use them in situations that require a C constant expression (in static initializers and for array sizes) (b) the type sanity checking and MIN_T/MAX_T avoids both of these issues. Now, in the whole (long) discussion about all this, it was pointed out that the whole type sanity checking is entirely unnecessary for min_t/max_t which get a fixed type that the comparison is done in. But that still leaves min_t/max_t unnecessarily complicated due to worries about the C constant expression case. However, it turns out that there really aren't very many cases that use min_t/max_t for this, and we can just force-convert those. This does exactly that. Which in turn will then allow for much simpler implementations of min_t()/max_t(). All the usual "macros in all upper case will evaluate the arguments multiple times" rules apply. We should do all the same things for the regular min/max() vs MIN/MAX() cases, but that has the added complexity of various drivers defining their own local versions of MIN/MAX, so that needs another level of fixes first. Link: https://lore.kernel.org/all/b47fad1d0cf8449886ad148f8c013dae@AcuMS.aculab.com/ Cc: David Laight <David.Laight@aculab.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-07-26Merge tag 'for-net-2024-07-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix kernel crash when entering btmtk_usb_suspend - btmtk: Fix btmtk.c undefined reference build error - btintel: Fail setup on error - hci_sync: Fix suspending with wrong filter policy - hci_event: Fix setting DISCOVERY_FINDING for passive scanning * tag 'for-net-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanning Bluetooth: btmtk: remove #ifdef around declarations Bluetooth: btmtk: Fix btmtk.c undefined reference build error harder Bluetooth: btmtk: Fix btmtk.c undefined reference build error Bluetooth: hci_sync: Fix suspending with wrong filter policy Bluetooth: btmtk: Fix kernel crash when entering btmtk_usb_suspend Bluetooth: btintel: Fail setup on error ==================== Link: https://patch.msgid.link/20240726150502.3300832-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26Merge tag 'wireless-2024-07-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Couple of more urgent fixes: * ath12k: wowlan loop iteration issue * ath12k: fix soft lockup on suspend in certain scenarios * mt76: fix crash when removing an interface * mac80211: fix injection crash with some drivers that don't want monitor vif * cfg80211: fix S1G beacon parsing in scan * cfg80211: fix MLO link status reporting on connect * tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath12k: fix soft lockup on suspend wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups() wifi: cfg80211: correct S1G beacon length calculation wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done wifi: mac80211: use monitor sdata with driver only if desired ==================== Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-26Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanningLuiz Augusto von Dentz
DISCOVERY_FINDING shall only be set for active scanning as passive scanning is not meant to generate MGMT Device Found events causing discovering state to go out of sync since userspace would believe it is discovering when in fact it is just passive scanning. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088 Fixes: 2e2515c1ba38 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26Bluetooth: hci_sync: Fix suspending with wrong filter policyLuiz Augusto von Dentz
When suspending the scan filter policy cannot be 0x00 (no acceptlist) since that means the host has to process every advertisement report waking up the system, so this attempts to check if hdev is marked as suspended and if the resulting filter policy would be 0x00 (no acceptlist) then skip passive scanning if thre no devices in the acceptlist otherwise reset the filter policy to 0x01 so the acceptlist is used since the devices programmed there can still wakeup be system. Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-26wifi: cfg80211: correct S1G beacon length calculationJohannes Berg
The minimum header length calculation (equivalent to the start of the elements) for the S1G long beacon erroneously required only up to the start of u.s1g_beacon rather than the start of u.s1g_beacon.variable. Fix that, and also shuffle the branches around a bit to not assign useless values that are overwritten later. Reported-by: syzbot+0f3afa93b91202f21939@syzkaller.appspotmail.com Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Link: https://patch.msgid.link/20240724132912.9662972db7c1.I8779675b5bbda4994cc66f876b6b87a2361c3c0b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_doneVeerendranath Jakkam
Individual MLO links connection status is not copied to EVENT_CONNECT_RESULT data while processing the connect response information in cfg80211_connect_done(). Due to this failed links are wrongly indicated with success status in EVENT_CONNECT_RESULT. To fix this, copy the individual MLO links status to the EVENT_CONNECT_RESULT data. Fixes: 53ad07e9823b ("wifi: cfg80211: support reporting failed links") Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com [commit message editorial changes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26wifi: mac80211: use monitor sdata with driver only if desiredJohannes Berg
In commit 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") I changed mac80211 to always have an internal monitor_sdata to have something to have the chanctx bound to. However, if the driver didn't also have the WANT_MONITOR flag this would cause mac80211 to allocate it without telling the driver (which was intentional) but also use it for later APIs to the driver without it ever having known about it which was _not_ intentional. Check through the code and only use the monitor_sdata in the relevant places (TX, MU-MIMO follow settings, TX power, and interface iteration) when the WANT_MONITOR flag is set. Cc: stable@vger.kernel.org Fixes: 0d9c2beed116 ("wifi: mac80211: fix monitor channel with chanctx emulation") Reported-by: ZeroBeat <ZeroBeat@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086 Tested-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-07-26sched: act_ct: take care of padding in struct zones_ht_keyEric Dumazet
Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 Fixes: 88c67aeb1407 ("sched: act_ct: add netns into the key of tcf_ct_flow_table") Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-07-25ethtool: rss: echo the context number backJakub Kicinski
The response to a GET request in Netlink should fully identify the queried object. RSS_GET accepts context id as an input, so it must echo that attribute back to the response. After (assuming context 1 has been created): $ ./cli.py --spec netlink/specs/ethtool.yaml \ --do rss-get \ --json '{"header": {"dev-index": 2}, "context": 1}' {'context': 1, 'header': {'dev-index': 2, 'dev-name': 'eth0'}, [...] Fixes: 7112a04664bf ("ethtool: add netlink based get rss support") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240724234249.2621109-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25Merge tag 'net-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. A lot of networking people were at a conference last week, busy catching COVID, so relatively short PR. Current release - regressions: - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP Current release - new code bugs: - l2tp: protect session IDR and tunnel session list with one lock, make sure the state is coherent to avoid a warning - eth: bnxt_en: update xdp_rxq_info in queue restart logic - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field Previous releases - regressions: - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len, the field reuses previously un-validated pad Previous releases - always broken: - tap/tun: drop short frames to prevent crashes later in the stack - eth: ice: add a per-VF limit on number of FDIR filters - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash" * tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) tun: add missing verification for short frame tap: add missing verification for short frame mISDN: Fix a use after free in hfcmulti_tx() gve: Fix an edge case for TSO skb validity check bnxt_en: update xdp_rxq_info in queue restart logic tcp: process the 3rd ACK with sk_socket for TFO/MPTCP selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling MAINTAINERS: make Breno the netconsole maintainer MAINTAINERS: Update bonding entry net: nexthop: Initialize all fields in dumped nexthops net: stmmac: Correct byte order of perfect_match selftests: forwarding: skip if kernel not support setting bridge fdb learning limit tipc: Return non-zero value from tipc_udp_addr2str() on error netfilter: nft_set_pipapo_avx2: disable softinterrupts ice: Fix recipe read procedure ice: Add a per-VF limit on number of FDIR filters net: bonding: correctly annotate RCU in bond_should_notify_peers() ...
2024-07-25Merge tag 'constfy-sysctl-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl constification from Joel Granados: "Treewide constification of the ctl_table argument of proc_handlers using a coccinelle script and some manual code formatting fixups. This is a prerequisite to moving the static ctl_table structs into read-only data section which will ensure that proc_handler function pointers cannot be modified" * tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: treewide: constify the ctl_table argument of proc_handlers
2024-07-25Merge tag 'driver-core-6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core changes for 6.11-rc1. Lots of stuff in here, with not a huge diffstat, but apis are evolving which required lots of files to be touched. Highlights of the changes in here are: - platform remove callback api final fixups (Uwe took many releases to get here, finally!) - Rust bindings for basic firmware apis and initial driver-core interactions. It's not all that useful for a "write a whole driver in rust" type of thing, but the firmware bindings do help out the phy rust drivers, and the driver core bindings give a solid base on which others can start their work. There is still a long way to go here before we have a multitude of rust drivers being added, but it's a great first step. - driver core const api changes. This reached across all bus types, and there are some fix-ups for some not-common bus types that linux-next and 0-day testing shook out. This work is being done to help make the rust bindings more safe, as well as the C code, moving toward the end-goal of allowing us to put driver structures into read-only memory. We aren't there yet, but are getting closer. - minor devres cleanups and fixes found by code inspection - arch_topology minor changes - other minor driver core cleanups All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits) ARM: sa1100: make match function take a const pointer sysfs/cpu: Make crash_hotplug attribute world-readable dio: Have dio_bus_match() callback take a const * zorro: make match function take a const pointer driver core: module: make module_[add|remove]_driver take a const * driver core: make driver_find_device() take a const * driver core: make driver_[create|remove]_file take a const * firmware_loader: fix soundness issue in `request_internal` firmware_loader: annotate doctests as `no_run` devres: Correct code style for functions that return a pointer type devres: Initialize an uninitialized struct member devres: Fix memory leakage caused by driver API devm_free_percpu() devres: Fix devm_krealloc() wasting memory driver core: platform: Switch to use kmemdup_array() driver core: have match() callback in struct bus_type take a const * MAINTAINERS: add Rust device abstractions to DRIVER CORE device: rust: improve safety comments MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER firmware: rust: improve safety comments ...
2024-07-25Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-07-25 We've added 14 non-merge commits during the last 8 day(s) which contain a total of 19 files changed, 177 insertions(+), 70 deletions(-). The main changes are: 1) Fix af_unix to disable MSG_OOB handling for sockets in BPF sockmap and BPF sockhash. Also add test coverage for this case, from Michal Luczaj. 2) Fix a segmentation issue when downgrading gso_size in the BPF helper bpf_skb_adjust_room(), from Fred Li. 3) Fix a compiler warning in resolve_btfids due to a missing type cast, from Liwei Song. 4) Fix stack allocation for arm64 to align the stack pointer at a 16 byte boundary in the fexit_sleep BPF selftest, from Puranjay Mohan. 5) Fix a xsk regression to require a flag when actuating tx_metadata_len, from Stanislav Fomichev. 6) Fix function prototype BTF dumping in libbpf for prototypes that have no input arguments, from Andrii Nakryiko. 7) Fix stacktrace symbol resolution in perf script for BPF programs containing subprograms, from Hou Tao. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size tools/resolve_btfids: Fix comparison of distinct pointer types warning in resolve_btfids bpf, events: Use prog to emit ksymbol event for main program selftests/bpf: Test sockmap redirect for AF_UNIX MSG_OOB selftests/bpf: Parametrize AF_UNIX redir functions to accept send() flags selftests/bpf: Support SOCK_STREAM in unix_inet_redir_to_connected() af_unix: Disable MSG_OOB handling for sockets in sockmap/sockhash bpftool: Fix typo in usage help libbpf: Fix no-args func prototype BTF dumping syntax MAINTAINERS: Update powerpc BPF JIT maintainers MAINTAINERS: Update email address of Naveen selftests/bpf: fexit_sleep: Fix stack allocation for arm64 ==================== Link: https://patch.msgid.link/20240725114312.32197-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-25tcp: process the 3rd ACK with sk_socket for TFO/MPTCPMatthieu Baerts (NGI0)
The 'Fixes' commit recently changed the behaviour of TCP by skipping the processing of the 3rd ACK when a sk->sk_socket is set. The goal was to skip tcp_ack_snd_check() in tcp_rcv_state_process() not to send an unnecessary ACK in case of simultaneous connect(). Unfortunately, that had an impact on TFO and MPTCP. I started to look at the impact on MPTCP, because the MPTCP CI found some issues with the MPTCP Packetdrill tests [1]. Then Paolo Abeni suggested me to look at the impact on TFO with "plain" TCP. For MPTCP, when receiving the 3rd ACK of a request adding a new path (MP_JOIN), sk->sk_socket will be set, and point to the MPTCP sock that has been created when the MPTCP connection got established before with the first path. The newly added 'goto' will then skip the processing of the segment text (step 7) and not go through tcp_data_queue() where the MPTCP options are validated, and some actions are triggered, e.g. sending the MPJ 4th ACK [2] as demonstrated by the new errors when running a packetdrill test [3] establishing a second subflow. This doesn't fully break MPTCP, mainly the 4th MPJ ACK that will be delayed. Still, we don't want to have this behaviour as it delays the switch to the fully established mode, and invalid MPTCP options in this 3rd ACK will not be caught any more. This modification also affects the MPTCP + TFO feature as well, and being the reason why the selftests started to be unstable the last few days [4]. For TFO, the existing 'basic-cookie-not-reqd' test [5] was no longer passing: if the 3rd ACK contains data, and the connection is accept()ed before receiving them, these data would no longer be processed, and thus not ACKed. One last thing about MPTCP, in case of simultaneous connect(), a fallback to TCP will be done, which seems fine: `../common/defaults.sh` 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_MPTCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460, sackOK, TS val 100 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 < S 0:0(0) win 1000 <mss 1460, sackOK, TS val 407 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 330 ecr 0, nop, wscale 8, mpcapable v1 flags[flag_h] nokey> +0 < S. 0:0(0) ack 1 win 65535 <mss 1460, sackOK, TS val 700 ecr 100, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey=2]> +0 > . 1:1(0) ack 1 <nop, nop, TS val 845707014 ecr 700, nop, nop, sack 0:1> Simultaneous SYN-data crossing is also not supported by TFO, see [6]. Kuniyuki Iwashima suggested to restrict the processing to SYN+ACK only: that's a more generic solution than the one initially proposed, and also enough to fix the issues described above. Later on, Eric Dumazet mentioned that an ACK should still be sent in reaction to the second SYN+ACK that is received: not sending a DUPACK here seems wrong and could hurt: 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460, sackOK, TS val 1000 ecr 0,nop,wscale 8> +0 < S 0:0(0) win 1000 <mss 1000, sackOK, nop, nop> +0 > S. 0:0(0) ack 1 <mss 1460, sackOK, TS val 3308134035 ecr 0,nop,wscale 8> +0 < S. 0:0(0) ack 1 win 1000 <mss 1000, sackOK, nop, nop> +0 > . 1:1(0) ack 1 <nop, nop, sack 0:1> // <== Here So in this version, the 'goto consume' is dropped, to always send an ACK when switching from TCP_SYN_RECV to TCP_ESTABLISHED. This ACK will be seen as a DUPACK -- with DSACK if SACK has been negotiated -- in case of simultaneous SYN crossing: that's what is expected here. Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/9936227696 [1] Link: https://datatracker.ietf.org/doc/html/rfc8684#fig_tokens [2] Link: https://github.com/multipath-tcp/packetdrill/blob/mptcp-net-next/gtests/net/mptcp/syscalls/accept.pkt#L28 [3] Link: https://netdev.bots.linux.dev/contest.html?executor=vmksft-mptcp-dbg&test=mptcp-connect-sh [4] Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/server/basic-cookie-not-reqd.pkt#L21 [5] Link: https://github.com/google/packetdrill/blob/master/gtests/net/tcp/fastopen/client/simultaneous-fast-open.pkt [6] Fixes: 23e89e8ee7be ("tcp: Don't drop SYN+ACK for simultaneous connect().") Suggested-by: Paolo Abeni <pabeni@redhat.com> Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240724-upstream-net-next-20240716-tcp-3rd-ack-consume-sk_socket-v3-1-d48339764ce9@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-25xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_lenStanislav Fomichev
Julian reports that commit 341ac980eab9 ("xsk: Support tx_metadata_len") can break existing use cases which don't zero-initialize xdp_umem_reg padding. Introduce new XDP_UMEM_TX_METADATA_LEN to make sure we interpret the padding as tx_metadata_len only when being explicitly asked. Fixes: 341ac980eab9 ("xsk: Support tx_metadata_len") Reported-by: Julian Schindel <mail@arctic-alpaca.de> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/20240713015253.121248-2-sdf@fomichev.me
generated by cgit (git 2.34.1) at 2025-09-12 11:03:20 +0000