| Age | Commit message (Collapse) | Author |
|---|
|
On some platforms there is a padding hole in the nft_verdict
structure, between the verdict code and the chain pointer.
On element insertion, if the new element clashes with an existing one and
NLM_F_EXCL flag isn't set, we want to ignore the -EEXIST error as long as
the data associated with duplicated element is the same as the existing
one. The data equality check uses memcmp.
For normal data (NFT_DATA_VALUE) this works fine, but for NFT_DATA_VERDICT
padding area leads to spurious failure even if the verdict data is the
same.
This then makes the insertion fail with 'already exists' error, even
though the new "key : data" matches an existing entry and userspace
told the kernel that it doesn't want to receive an error indication.
Fixes: c016c7e45ddf ("netfilter: nf_tables: honor NLM_F_EXCL flag in set element insertion")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This reverts commit 56a16035bb6effb37177867cea94c13a8382f745.
Since the previous commit, STP works on bridge in netns.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
[ 50.558135] br0: port 1(veth0) entered blocking state
[ 50.558366] br0: port 1(veth0) entered disabled state
[ 50.558798] veth0: entered allmulticast mode
[ 50.564401] veth0: entered promiscuous mode
# ip link set veth1 master br0 up
[ 54.215487] br0: port 2(veth1) entered blocking state
[ 54.215657] br0: port 2(veth1) entered disabled state
[ 54.215848] veth1: entered allmulticast mode
[ 54.219577] veth1: entered promiscuous mode
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
[ 61.960726] br0: port 2(veth1) entered blocking state
[ 61.961097] br0: port 2(veth1) entered listening state
[ 61.961495] br0: port 1(veth0) entered blocking state
[ 61.961653] br0: port 1(veth0) entered listening state
[ 63.998835] br0: port 2(veth1) entered blocking state
[ 77.437113] br0: port 1(veth0) entered learning state
[ 86.653501] br0: received packet on veth0 with own address as source address (addr:6e:0f:e7:6f:5f:5f, vlan:0)
[ 92.797095] br0: port 1(veth0) entered forwarding state
[ 92.797398] br0: topology change detected, propagating
Let's remove the warning.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now these upper layer protocol handlers can be called from llc_rcv()
as sap->rcv_func(), which is registered by llc_sap_open().
* function which is passed to register_8022_client()
-> no in-kernel user calls register_8022_client().
* snap_rcv()
`- proto->rcvfunc() : registered by register_snap_client()
-> aarp_rcv() and atalk_rcv() drop packets from non-root netns
* stp_pdu_rcv()
`- garp_protos[]->rcv() : registered by stp_proto_register()
-> garp_pdu_rcv() and br_stp_rcv() are netns-aware
So, we can safely remove the netns restriction in llc_rcv().
Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will remove this restriction in llc_rcv() in the following patch,
which means that the protocol handler must be aware of netns.
if (!net_eq(dev_net(dev), &init_net))
goto drop;
llc_rcv() fetches llc_type_handlers[llc_pdu_type(skb) - 1] and calls it
if not NULL.
If the PDU type is LLC_DEST_CONN, llc_conn_handler() is called to pass
skb to corresponding sockets. Then, we must look up a proper socket in
the same netns with skb->dev.
llc_conn_handler() calls __llc_lookup() to look up a established or
litening socket by __llc_lookup_established() and llc_lookup_listener().
Both functions iterate on a list and call llc_estab_match() or
llc_listener_match() to check if the socket is the correct destination.
However, these functions do not check netns.
Also, bind() and connect() call llc_establish_connection(), which
finally calls __llc_lookup_established(), to check if there is a
conflicting socket.
Let's test netns in llc_estab_match() and llc_listener_match().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will remove this restriction in llc_rcv() soon, which means that the
protocol handler must be aware of netns.
if (!net_eq(dev_net(dev), &init_net))
goto drop;
llc_rcv() fetches llc_type_handlers[llc_pdu_type(skb) - 1] and calls it
if not NULL.
If the PDU type is LLC_DEST_SAP, llc_sap_handler() is called to pass skb
to corresponding sockets. Then, we must look up a proper socket in the
same netns with skb->dev.
If the destination is a multicast address, llc_sap_handler() calls
llc_sap_mcast(). It calculates a hash based on DSAP and skb->dev->ifindex,
iterates on a socket list, and calls llc_mcast_match() to check if the
socket is the correct destination. Then, llc_mcast_match() checks if
skb->dev matches with llc_sk(sk)->dev. So, we need not check netns here.
OTOH, if the destination is a unicast address, llc_sap_handler() calls
llc_lookup_dgram() to look up a socket, but it does not check the netns.
Therefore, we need to add netns check in llc_lookup_dgram().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
conntrack
By not setting IPS_CONFIRMED in tmpl that allows the exp not to be removed
from the hashtable when lookup, we can simplify the exp processing code a
lot in openvswitch conntrack.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the following flows, the packets will be dropped if OVS TC offload is
enabled.
'ip,ct_state=-trk,in_port=1 actions=ct(zone=1)'
'ip,ct_state=+trk+new+rel,in_port=1 actions=ct(commit,zone=1)'
'ip,ct_state=+trk+new+rel,in_port=1 actions=ct(commit,zone=2),normal'
In the 1st flow, it finds the exp from the hashtable and removes it then
creates the ct with this exp in act_ct. However, in the 2nd flow it goes
to the OVS upcall at the 1st time. When the skb comes back from userspace,
it has to create the ct again without exp(the exp was removed last time).
With no 'rel' set in the ct, the 3rd flow can never get matched.
In OVS conntrack, it works around it by adding its own exp lookup function
ovs_ct_expect_find() where it doesn't remove the exp. Instead of creating
a real ct, it only updates its keys with the exp and its master info. So
when the skb comes back, the exp is still in the hashtable.
However, we can't do this trick in act_ct, as tc flower match is using a
real ct, and passing the exp and its master info to flower parsing via
tc_skb_cb is also not possible (tc_skb_cb size is not big enough).
The simple and clear fix is to not remove the exp at the 1st flow, namely,
not set IPS_CONFIRMED in tmpl when commit is not set in act_ct.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently nf_conntrack_in() calling nf_ct_find_expectation() will
remove the exp from the hash table. However, in some scenario, we
expect the exp not to be removed when the created ct will not be
confirmed, like in OVS and TC conntrack in the following patches.
This patch allows exp not to be removed by setting IPS_CONFIRMED
in the status of the tmpl.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the user set an MTU value, it usually means that there are special
requirements for the MTU. But if an interface gots activated, the MTU was
always recalculated and then the user set value was overwritten.
The only reason why this user set value has to be overwritten, is when the
MTU has to be decreased because batman-adv is not able to transfer packets
with the user specified size.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
After commit d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP"),
tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c.
Fixes: d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20230718162049.1444938-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In most cases UDP sockets use the default data ready callback.
Leverage the indirect call wrapper for such callback to avoid an
indirect call in fastpath.
The above gives small but measurable performance gain under UDP flood.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/d47d53e6f8ee7a11228ca2f025d6243cc04b77f3.1689691004.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 3f4ca5fafc08881d7a57daa20449d171f2887043.
Commit 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in
ehash table") reversed the order in how a socket is inserted into ehash
to fix an issue that ehash-lookup could fail when reqsk/full sk/twsk are
swapped. However, it introduced another lookup failure.
The full socket in ehash is allocated from a slab with SLAB_TYPESAFE_BY_RCU
and does not have SOCK_RCU_FREE, so the socket could be reused even while
it is being referenced on another CPU doing RCU lookup.
Let's say a socket is reused and inserted into the same hash bucket during
lookup. After the blamed commit, a new socket is inserted at the end of
the list. If that happens, we will skip sockets placed after the previous
position of the reused socket, resulting in ehash lookup failure.
As described in Documentation/RCU/rculist_nulls.rst, we should insert a
new socket at the head of the list to avoid such an issue.
This issue, the swap-lookup-failure, and another variant reported in [0]
can all be handled properly by adding a locked ehash lookup suggested by
Eric Dumazet [1].
However, this issue could occur for every packet, thus more likely than
the other two races, so let's revert the change for now.
Link: https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/ [0]
Link: https://lore.kernel.org/netdev/CANn89iK8snOz8TYOhhwfimC7ykYA78GA3Nyv8x06SZYa1nKdyA@mail.gmail.com/ [1]
Fixes: 3f4ca5fafc08 ("tcp: avoid the lookup process failing to get sk in ehash table")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717215918.15723-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2023-07-19
Just a leftover from the last development cycle:
1) delete a clear to zero of encap_oa, it is not needed anymore.
From Leon Romanovsky.
* tag 'ipsec-next-2023-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: delete not-needed clear to zero of encap_oa
====================
Link: https://lore.kernel.org/r/20230719100228.373055-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-19
We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).
The main changes are:
1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.
2) BPF link support for tc BPF programs, from Daniel Borkmann.
3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.
4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.
5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================
Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This work refactors and adds a lightweight extension ("tcx") to the tc BPF
ingress and egress data path side for allowing BPF program management based
on fds via bpf() syscall through the newly added generic multi-prog API.
The main goal behind this work which we also presented at LPC [0] last year
and a recent update at LSF/MM/BPF this year [3] is to support long-awaited
BPF link functionality for tc BPF programs, which allows for a model of safe
ownership and program detachment.
Given the rise in tc BPF users in cloud native environments, this becomes
necessary to avoid hard to debug incidents either through stale leftover
programs or 3rd party applications accidentally stepping on each others toes.
As a recap, a BPF link represents the attachment of a BPF program to a BPF
hook point. The BPF link holds a single reference to keep BPF program alive.
Moreover, hook points do not reference a BPF link, only the application's
fd or pinning does. A BPF link holds meta-data specific to attachment and
implements operations for link creation, (atomic) BPF program update,
detachment and introspection. The motivation for BPF links for tc BPF programs
is multi-fold, for example:
- From Meta: "It's especially important for applications that are deployed
fleet-wide and that don't "control" hosts they are deployed to. If such
application crashes and no one notices and does anything about that, BPF
program will keep running draining resources or even just, say, dropping
packets. We at FB had outages due to such permanent BPF attachment
semantics. With fd-based BPF link we are getting a framework, which allows
safe, auto-detachable behavior by default, unless application explicitly
opts in by pinning the BPF link." [1]
- From Cilium-side the tc BPF programs we attach to host-facing veth devices
and phys devices build the core datapath for Kubernetes Pods, and they
implement forwarding, load-balancing, policy, EDT-management, etc, within
BPF. Currently there is no concept of 'safe' ownership, e.g. we've recently
experienced hard-to-debug issues in a user's staging environment where
another Kubernetes application using tc BPF attached to the same prio/handle
of cls_bpf, accidentally wiping all Cilium-based BPF programs from underneath
it. The goal is to establish a clear/safe ownership model via links which
cannot accidentally be overridden. [0,2]
BPF links for tc can co-exist with non-link attachments, and the semantics are
in line also with XDP links: BPF links cannot replace other BPF links, BPF
links cannot replace non-BPF links, non-BPF links cannot replace BPF links and
lastly only non-BPF links can replace non-BPF links. In case of Cilium, this
would solve mentioned issue of safe ownership model as 3rd party applications
would not be able to accidentally wipe Cilium programs, even if they are not
BPF link aware.
Earlier attempts [4] have tried to integrate BPF links into core tc machinery
to solve cls_bpf, which has been intrusive to the generic tc kernel API with
extensions only specific to cls_bpf and suboptimal/complex since cls_bpf could
be wiped from the qdisc also. Locking a tc BPF program in place this way, is
getting into layering hacks given the two object models are vastly different.
We instead implemented the tcx (tc 'express') layer which is an fd-based tc BPF
attach API, so that the BPF link implementation blends in naturally similar to
other link types which are fd-based and without the need for changing core tc
internal APIs. BPF programs for tc can then be successively migrated from classic
cls_bpf to the new tc BPF link without needing to change the program's source
code, just the BPF loader mechanics for attaching is sufficient.
For the current tc framework, there is no change in behavior with this change
and neither does this change touch on tc core kernel APIs. The gist of this
patch is that the ingress and egress hook have a lightweight, qdisc-less
extension for BPF to attach its tc BPF programs, in other words, a minimal
entry point for tc BPF. The name tcx has been suggested from discussion of
earlier revisions of this work as a good fit, and to more easily differ between
the classic cls_bpf attachment and the fd-based one.
For the ingress and egress tcx points, the device holds a cache-friendly array
with program pointers which is separated from control plane (slow-path) data.
Earlier versions of this work used priority to determine ordering and expression
of dependencies similar as with classic tc, but it was challenged that for
something more future-proof a better user experience is required. Hence this
resulted in the design and development of the generic attach/detach/query API
for multi-progs. See prior patch with its discussion on the API design. tcx is
the first user and later we plan to integrate also others, for example, one
candidate is multi-prog support for XDP which would benefit and have the same
'look and feel' from API perspective.
The goal with tcx is to have maximum compatibility to existing tc BPF programs,
so they don't need to be rewritten specifically. Compatibility to call into
classic tcf_classify() is also provided in order to allow successive migration
or both to cleanly co-exist where needed given its all one logical tc layer and
the tcx plus classic tc cls/act build one logical overall processing pipeline.
tcx supports the simplified return codes TCX_NEXT which is non-terminating (go
to next program) and terminating ones with TCX_PASS, TCX_DROP, TCX_REDIRECT.
The fd-based API is behind a static key, so that when unused the code is also
not entered. The struct tcx_entry's program array is currently static, but
could be made dynamic if necessary at a point in future. The a/b pair swap
design has been chosen so that for detachment there are no allocations which
otherwise could fail.
The work has been tested with tc-testing selftest suite which all passes, as
well as the tc BPF tests from the BPF CI, and also with Cilium's L4LB.
Thanks also to Nikolay Aleksandrov and Martin Lau for in-depth early reviews
of this work.
[0] https://lpc.events/event/16/contributions/1353/
[1] https://lore.kernel.org/bpf/CAEf4BzbokCJN33Nw_kg82sO=xppXnKWEncGTWCTB9vGCmLB6pw@mail.gmail.com
[2] https://colocatedeventseu2023.sched.com/event/1Jo6O/tales-from-an-ebpf-programs-murder-mystery-hemanth-malla-guillaume-fournier-datadog
[3] http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf
[4] https://lore.kernel.org/bpf/20210604063116.234316-1-memxor@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230719140858.13224-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Modify xskq_cons_read_desc_batch() in a way that each processed
descriptor will be checked if it is an EOP one or not and act
accordingly to that.
Change the behavior of mentioned function to break the processing when
stumbling upon invalid descriptor instead of skipping it. Furthermore,
let us give only full packets down to ZC driver.
With these two assumptions ZC drivers will not have to take care of an
intermediate state of incomplete frames, which will simplify its
implementations a lot.
Last but not least, stop processing when count of frags would exceed
max supported segments on underlying device.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-15-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Given that skb_shared_info relies on skb_frag_t, in order to support
xskb chaining, introduce xdp_buff_xsk::xskb_list_node and
xsk_buff_pool::xskb_list.
This is needed so ZC drivers can add frags as xskb nodes which will make
it possible to handle it both when producing AF_XDP Rx descriptors as
well as freeing/recycling all the frags that a single frame carries.
Speaking of latter, update xsk_buff_free() to take care of list nodes.
For the former (adding as frags), introduce xsk_buff_add_frag() for ZC
drivers usage that is going to be used to add a frag to xskb list from
pool.
xsk_buff_get_frag() will be utilized by XDP_TX and, on contrary, will
return xdp_buff.
One of the previous patches added a wrapper for ZC Rx so implement xskb
list walk and production of Rx descriptors there.
On bind() path, bail out if socket wants to use ZC multi-buffer but
underlying netdev does not support it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-12-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce new netlink attribute NETDEV_A_DEV_XDP_ZC_MAX_SEGS that will
carry maximum fragments that underlying ZC driver is able to handle on
TX side. It is going to be included in netlink response only when driver
supports ZC. Any value higher than 1 implies multi-buffer ZC support on
underlying device.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-11-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Descriptors with zero length are not supported by many NICs. To preserve
uniform behavior discard any zero length desc as invvalid desc.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-10-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For transmitting an AF_XDP packet, allocate skb while processing the
first desc and copy data to it. The 'XDP_PKT_CONTD' flag in 'options'
field of the desc indicates the EOP status of the packet. If the current
desc is not EOP, store the skb, release the current desc and go
on to read the next descs.
Allocate a page for each subsequent desc, copy data to it and add it as
a frag in the skb stored in xsk. On processing EOP, transmit the skb
with frags. Addresses contained in descs have been already queued in
consumer queue and skb destructor updated the completion count.
On transmit failure cancel the releases, clear the descs from the
completion queue and consume the skb for retrying packet transmission.
For any invalid descriptor (invalid length/address/options) in the middle
of a packet, all pending descriptors will be dropped by xsk core along
with the invalid one and the next descriptor is treated as the start of
a new packet.
Maximum supported frames for a packet is MAX_SKB_FRAGS + 1. If it is
exceeded, all descriptors accumulated so far are dropped.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-9-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In Tx path, xsk core reserves space for each desc to be transmitted in
the completion queue and it's address contained in it is stored in the
skb destructor arg. After successful transmission the skb destructor
submits the addr marking completion.
To handle multiple descriptors per packet, now along with reserving
space for each descriptor, the corresponding address is also stored in
completion queue. The number of pending descriptors are stored in skb
destructor arg and is used by the skb destructor to update completions.
Introduce 'skb' in xdp_sock to store a partially built packet when
__xsk_generic_xmit() must return before it sees the EOP descriptor for
the current packet so that packet building can resume in next call of
__xsk_generic_xmit().
Helper functions are introduced to set and get the pending descriptors
in the skb destructor arg. Also, wrappers are introduced for storing
descriptor addresses, submitting and cancelling (for unsuccessful
transmissions) the number of completions.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-7-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add multi-buffer support for AF_XDP by extending the XDP multi-buffer
support to be reflected in user-space when a packet is redirected to
an AF_XDP socket.
In the XDP implementation, the NIC driver builds the xdp_buff from the
first frag of the packet and adds any subsequent frags in the skb_shinfo
area of the xdp_buff. In AF_XDP core, XDP buffers are allocated from
xdp_sock's pool and data is copied from the driver's xdp_buff and frags.
Once an allocated XDP buffer is full and there is still data to be
copied, the 'XDP_PKT_CONTD' flag in'options' field of the corresponding
xdp ring descriptor is set and passed to the application. When application
sees the aforementioned flag set it knows there is pending data for this
packet that will be carried in the following descriptors. If there is no
more data to be copied, the flag in 'options' field is cleared for that
descriptor signalling EOP to the application.
If application reads a batch of descriptors using for example the libxdp
interfaces, it is not guaranteed that the batch will end with a full
packet. It might end in the middle of a packet and the rest of the frames
of that packet will arrive at the beginning of the next batch.
AF_XDP ensures that only a complete packet (along with all its frags) is
sent to application.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-6-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
If the data in xdp_buff exceeds the xsk frame length, the packet needs
to be dropped. This check is currently being done in __xsk_rcv(). Move
the described logic to xsk_rcv_check() so that such a xdp_buff will
only be dropped if the application does not support multi-buffer
(absence of XDP_USE_SG bind flag). This is applicable for all cases:
copy mode, zero copy mode as well as skb mode.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-5-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, __xsk_rcv_zc() is a function that is responsible for
producing AF_XDP Rx descriptors. It is used by both copy and zero-copy
mode. Both of these modes are going to differ when multi-buffer support
is going to be added. ZC will work on a chain of xdp_buff_xsk structs
whereas copy-mode is going to utilize skb_shared_info contents. This
means that ZC-specific changes would affect the copy mode.
Let's modify __xsk_rcv_zc() to work directly on xdp_buff_xsk so the
callsites have to retrieve this from xdp_buff. Also, introduce
xsk_rcv_zc() which will carry all the needed later changes for
supporting multi-buffer on ZC side that do not apply to copy mode.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-4-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As of now xsk core drops any xdp_buff with data size greater than the
xsk frame_size as set by the af_xdp application. With multi-buffer
support introduced in the next patch xsk core can now split those
buffers into multiple descriptors provided the af_xdp application can
handle them. Such capability of the application needs to be independent
of the xdp_prog's frag support capability since there are cases where
even a single xdp_buffer may need to be split into multiple descriptors
owing to a smaller xsk frame size.
For e.g., with NIC rx_buffer size set to 4kB, a 3kB packet will
constitute of a single buffer and so will be sent as such to AF_XDP layer
irrespective of 'xdp.frags' capability of the XDP program. Now if the xsk
frame size is set to 2kB by the AF_XDP application, then the packet will
need to be split into 2 descriptors if AF_XDP application can handle
multi-buffer, else it needs to be dropped.
Applications can now advertise their frag handling capability to xsk core
so that xsk core can decide if it should drop or split xdp_buffs that
exceed xsk frame size. This is done using a new 'XSK_USE_SG' bind flag
for the xdp socket.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-3-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the 'options' field in xdp_desc as a packet continuity marker. Since
'options' field was unused till now and was expected to be set to 0, the
'eop' descriptor will have it set to 0, while the non-eop descriptors
will have to set it to 1. This ensures legacy applications continue to
work without needing any change for single-buffer packets.
Add helper functions and extend xskq_prod_reserve_desc() to use the
'options' field.
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-2-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There's no reason for setting the RTO_ONLINK flag in ->flowi4_tos as
RT_CONN_FLAGS() does. We can easily set ->flowi4_scope properly
instead. This makes the code more explicit and will allow to convert
->flowi4_tos to dscp_t in the future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no reason for setting the RTO_ONLINK flag in ->flowi4_tos as
RT_CONN_FLAGS() does. We can easily set ->flowi4_scope properly
instead. This makes the code more explicit and will allow to convert
->flowi4_tos to dscp_t in the future.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
goto free_skb if an unexpected result is returned by pskb_tirm()
in erspan_xmit().
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
goto err_free_skb if an unexpected result is returned by pskb_tirm()
in erspan_fb_xmit().
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
goto tx_err if an unexpected result is returned by pskb_tirm()
in ip6erspan_tunnel_xmit().
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
key might contain private part of the key, so better use
kfree_sensitive to free it.
Fixes: 38320c70d282 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new bridge port attribute that allows attaching a nexthop object
ID to an skb that is redirected to a backup bridge port with VLAN
tunneling enabled.
Specifically, when redirecting a known unicast packet, read the backup
nexthop ID from the bridge port that lost its carrier and set it in the
bridge control block of the skb before forwarding it via the backup
port. Note that reading the ID from the bridge port should not result in
a cache miss as the ID is added next to the 'backup_port' field that was
already accessed. After this change, the 'state' field still stays on
the first cache line, together with other data path related fields such
as 'flags and 'vlgrp':
struct net_bridge_port {
struct net_bridge * br; /* 0 8 */
struct net_device * dev; /* 8 8 */
netdevice_tracker dev_tracker; /* 16 0 */
struct list_head list; /* 16 16 */
long unsigned int flags; /* 32 8 */
struct net_bridge_vlan_group * vlgrp; /* 40 8 */
struct net_bridge_port * backup_port; /* 48 8 */
u32 backup_nhid; /* 56 4 */
u8 priority; /* 60 1 */
u8 state; /* 61 1 */
u16 port_no; /* 62 2 */
/* --- cacheline 1 boundary (64 bytes) --- */
[...]
} __attribute__((__aligned__(8)));
When forwarding an skb via a bridge port that has VLAN tunneling
enabled, check if the backup nexthop ID stored in the bridge control
block is valid (i.e., not zero). If so, instead of attaching the
pre-allocated metadata (that only has the tunnel key set), allocate a
new metadata, set both the tunnel key and the nexthop object ID and
attach it to the skb.
By default, do not dump the new attribute to user space as a value of
zero is an invalid nexthop object ID.
The above is useful for EVPN multihoming. When one of the links
composing an Ethernet Segment (ES) fails, traffic needs to be redirected
towards the host via one of the other ES peers. For example, if a host
is multihomed to three different VTEPs, the backup port of each ES link
needs to be set to the VXLAN device and the backup nexthop ID needs to
point to an FDB nexthop group that includes the IP addresses of the
other two VTEPs. The VXLAN driver will extract the ID from the metadata
of the redirected skb, calculate its flow hash and forward it towards
one of the other VTEPs. If the ID does not exist, or represents an
invalid nexthop object, the VXLAN driver will drop the skb. This
relieves the bridge driver from the need to validate the ID.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TCP request sockets are lockless, tcp_rsk(req)->ts_recent
can change while being read by another cpu as syzbot noticed.
This is harmless, but we should annotate the known races.
Note that tcp_check_req() changes req->ts_recent a bit early,
we might change this in the future.
BUG: KCSAN: data-race in tcp_check_req / tcp_check_req
write to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 1:
tcp_check_req+0x694/0xc70 net/ipv4/tcp_minisocks.c:762
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
do_softirq+0x7e/0xb0 kernel/softirq.c:472
__local_bh_enable_ip+0x64/0x70 kernel/softirq.c:396
local_bh_enable+0x1f/0x20 include/linux/bottom_half.h:33
rcu_read_unlock_bh include/linux/rcupdate.h:843 [inline]
__dev_queue_xmit+0xabb/0x1d10 net/core/dev.c:4271
dev_queue_xmit include/linux/netdevice.h:3088 [inline]
neigh_hh_output include/net/neighbour.h:528 [inline]
neigh_output include/net/neighbour.h:542 [inline]
ip_finish_output2+0x700/0x840 net/ipv4/ip_output.c:229
ip_finish_output+0xf4/0x240 net/ipv4/ip_output.c:317
NF_HOOK_COND include/linux/netfilter.h:292 [inline]
ip_output+0xe5/0x1b0 net/ipv4/ip_output.c:431
dst_output include/net/dst.h:458 [inline]
ip_local_out net/ipv4/ip_output.c:126 [inline]
__ip_queue_xmit+0xa4d/0xa70 net/ipv4/ip_output.c:533
ip_queue_xmit+0x38/0x40 net/ipv4/ip_output.c:547
__tcp_transmit_skb+0x1194/0x16e0 net/ipv4/tcp_output.c:1399
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_write_xmit+0x13ff/0x2fd0 net/ipv4/tcp_output.c:2693
__tcp_push_pending_frames+0x6a/0x1a0 net/ipv4/tcp_output.c:2877
tcp_push_pending_frames include/net/tcp.h:1952 [inline]
__tcp_sock_set_cork net/ipv4/tcp.c:3336 [inline]
tcp_sock_set_cork+0xe8/0x100 net/ipv4/tcp.c:3343
rds_tcp_xmit_path_complete+0x3b/0x40 net/rds/tcp_send.c:52
rds_send_xmit+0xf8d/0x1420 net/rds/send.c:422
rds_send_worker+0x42/0x1d0 net/rds/threads.c:200
process_one_work+0x3e6/0x750 kernel/workqueue.c:2408
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2555
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
read to 0xffff88813c8afb84 of 4 bytes by interrupt on cpu 0:
tcp_check_req+0x32a/0xc70 net/ipv4/tcp_minisocks.c:622
tcp_v4_rcv+0x12db/0x1b70 net/ipv4/tcp_ipv4.c:2071
ip_protocol_deliver_rcu+0x356/0x6d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x13c/0x1a0 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_local_deliver+0xec/0x1c0 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:468 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip_rcv+0x197/0x270 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5493 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5607
process_backlog+0x21f/0x380 net/core/dev.c:5935
__napi_poll+0x60/0x3b0 net/core/dev.c:6498
napi_poll net/core/dev.c:6565 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6698
__do_softirq+0xc1/0x265 kernel/softirq.c:571
run_ksoftirqd+0x17/0x20 kernel/softirq.c:939
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:379
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
value changed: 0x1cd237f1 -> 0x1cd237f2
Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP request sockets are lockless, some of their fields
can change while being read by another cpu as syzbot noticed.
This is usually harmless, but we should annotate the known
races.
This patch takes care of tcp_rsk(req)->txhash,
a separate one is needed for tcp_rsk(req)->ts_recent.
BUG: KCSAN: data-race in tcp_make_synack / tcp_rtx_synack
write to 0xffff8881362304bc of 4 bytes by task 32083 on cpu 1:
tcp_rtx_synack+0x9d/0x2a0 net/ipv4/tcp_output.c:4213
inet_rtx_syn_ack+0x38/0x80 net/ipv4/inet_connection_sock.c:880
tcp_check_req+0x379/0xc70 net/ipv4/tcp_minisocks.c:665
tcp_v6_rcv+0x125b/0x1b20 net/ipv6/tcp_ipv6.c:1673
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff8881362304bc of 4 bytes by task 32078 on cpu 0:
tcp_make_synack+0x367/0xb40 net/ipv4/tcp_output.c:3663
tcp_v6_send_synack+0x72/0x420 net/ipv6/tcp_ipv6.c:544
tcp_conn_request+0x11a8/0x1560 net/ipv4/tcp_input.c:7059
tcp_v6_conn_request+0x13f/0x180 net/ipv6/tcp_ipv6.c:1175
tcp_rcv_state_process+0x156/0x1de0 net/ipv4/tcp_input.c:6494
tcp_v6_do_rcv+0x98a/0xb70 net/ipv6/tcp_ipv6.c:1509
tcp_v6_rcv+0x17b8/0x1b20 net/ipv6/tcp_ipv6.c:1735
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
netif_receive_skb_internal net/core/dev.c:5652 [inline]
netif_receive_skb+0x4a/0x310 net/core/dev.c:5711
tun_rx_batched+0x3bf/0x400
tun_get_user+0x1d24/0x22b0 drivers/net/tun.c:1997
tun_chr_write_iter+0x18e/0x240 drivers/net/tun.c:2043
call_write_iter include/linux/fs.h:1871 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x4ab/0x7d0 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x91d25731 -> 0xe79325cd
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32078 Comm: syz-executor.4 Not tainted 6.5.0-rc1-syzkaller-00033-geb26cbb1a754 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
Fixes: 58d607d3e52f ("tcp: provide skb->hash to synack packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230717144445.653164-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With modern NIC drivers shifting to full page allocations per
received frame, we face the following issue:
TCP has one per-netns sysctl used to tweak how to translate
a memory use into an expected payload (RWIN), in RX path.
tcp_win_from_space() implementation is limited to few cases.
For hosts dealing with various MSS, we either under estimate
or over estimate the RWIN we send to the remote peers.
For instance with the default sysctl_tcp_adv_win_scale value,
we expect to store 50% of payload per allocated chunk of memory.
For the typical use of MTU=1500 traffic, and order-0 pages allocations
by NIC drivers, we are sending too big RWIN, leading to potential
tcp collapse operations, which are extremely expensive and source
of latency spikes.
This patch makes sysctl_tcp_adv_win_scale obsolete, and instead
uses a per socket scaling factor, so that we can precisely
adjust the RWIN based on effective skb->len/skb->truesize ratio.
This patch alone can double TCP receive performance when receivers
are too slow to drain their receive queue, or by allowing
a bigger RWIN when MSS is close to PAGE_SIZE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20230717152917.751987-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-07-17
The 1st patch is by Ziyang Xuan and fixes a possible memory leak in
the receiver handling in the CAN RAW protocol.
YueHaibing contributes a use after free in bcm_proc_show() of the
Broad Cast Manager (BCM) CAN protocol.
The next 2 patches are by me and fix a possible null pointer
dereference in the RX path of the gs_usb driver with activated
hardware timestamps and the candlelight firmware.
The last patch is by Fedor Ross, Marek Vasut and me and targets the
mcp251xfd driver. The polling timeout of __mcp251xfd_chip_set_mode()
is increased to fix bus joining on busy CAN buses and very low bit
rate.
* tag 'linux-can-fixes-for-6.5-20230717' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: __mcp251xfd_chip_set_mode(): increase poll timeout
can: gs_usb: fix time stamp counter initialization
can: gs_usb: gs_can_open(): improve error handling
can: bcm: Fix UAF in bcm_proc_show()
can: raw: fix receiver memory leak
====================
Link: https://lore.kernel.org/r/20230717180938.230816-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code using btf_vmlinux in bpf_tcp_ca is removed by the
commit 9f0265e921de ("bpf: Require only one of cong_avoid() and cong_control() from a TCP CC")
so drop this useless btf_vmlinux declaration.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/4d38da4eadaba476bd92ffcd7a5a03a5e28745c0.1689582557.git.geliang.tang@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make rtnl_fill_vf() cancel the vfinfo attribute on error instead of the
inner rtnl_fill_vfinfo(), as it is the function that starts it.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/r/20230716072440.2372567-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All drivers are now updated for the March 2020 changes, and no longer
make use of the mac_pcs_get_state() or mac_an_restart() operations,
which are now NULL across all DSA drivers. All DSA drivers don't look
at speed, duplex, pause or advertisement in their phylink_mac_config()
method either.
Remove support for these operations from DSA, and stop marking DSA as
a legacy driver by default.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The destination port value in the IPCR control buffer on older
targets is 0xFFFF. Handle the same by updating the dst_port to
QRTR_PORT_CTRL.
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a use after free scenario while iterating through the nodes
radix tree despite the ns being a single threaded process. This can
happen when the radix tree APIs are not synchronized with the
rcu_read_lock() APIs.
Convert the radix tree for nodes to xarray to take advantage of the
built in rcu lock usage provided by xarray.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a use after free scenario while iterating through the servers
radix tree despite the ns being a single threaded process. This can
happen when the radix tree APIs are not synchronized with the
rcu_read_lock() APIs.
Convert the radix tree for servers to xarray to take advantage of the
built in rcu lock usage provided by xarray.
Signed-off-by: Chris Lew <quic_clew@quicinc.com>
Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BUG: KASAN: slab-use-after-free in bcm_proc_show+0x969/0xa80
Read of size 8 at addr ffff888155846230 by task cat/7862
CPU: 1 PID: 7862 Comm: cat Not tainted 6.5.0-rc1-00153-gc8746099c197 #230
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xd5/0x150
print_report+0xc1/0x5e0
kasan_report+0xba/0xf0
bcm_proc_show+0x969/0xa80
seq_read_iter+0x4f6/0x1260
seq_read+0x165/0x210
proc_reg_read+0x227/0x300
vfs_read+0x1d5/0x8d0
ksys_read+0x11e/0x240
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 7846:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x9e/0xa0
bcm_sendmsg+0x264b/0x44e0
sock_sendmsg+0xda/0x180
____sys_sendmsg+0x735/0x920
___sys_sendmsg+0x11d/0x1b0
__sys_sendmsg+0xfa/0x1d0
do_syscall_64+0x35/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 7846:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x27/0x40
____kasan_slab_free+0x161/0x1c0
slab_free_freelist_hook+0x119/0x220
__kmem_cache_free+0xb4/0x2e0
rcu_core+0x809/0x1bd0
bcm_op is freed before procfs entry be removed in bcm_release(),
this lead to bcm_proc_show() may read the freed bcm_op.
Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230715092543.15548-1-yuehaibing@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Got kmemleak errors with the following ltp can_filter testcase:
for ((i=1; i<=100; i++))
do
./can_filter &
sleep 0.1
done
==============================================================
[<00000000db4a4943>] can_rx_register+0x147/0x360 [can]
[<00000000a289549d>] raw_setsockopt+0x5ef/0x853 [can_raw]
[<000000006d3d9ebd>] __sys_setsockopt+0x173/0x2c0
[<00000000407dbfec>] __x64_sys_setsockopt+0x61/0x70
[<00000000fd468496>] do_syscall_64+0x33/0x40
[<00000000b7e47d51>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It's a bug in the concurrent scenario of unregister_netdevice_many()
and raw_release() as following:
cpu0 cpu1
unregister_netdevice_many(can_dev)
unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this
net_set_todo(can_dev)
raw_release(can_socket)
dev = dev_get_by_index(, ro->ifindex); // dev == NULL
if (dev) { // receivers in dev_rcv_lists not free because dev is NULL
raw_disable_allfilters(, dev, );
dev_put(dev);
}
...
ro->bound = 0;
...
call_netdevice_notifiers(NETDEV_UNREGISTER, )
raw_notify(, NETDEV_UNREGISTER, )
if (ro->bound) // invalid because ro->bound has been set 0
raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed
Add a net_device pointer member in struct raw_sock to record bound
can_dev, and use rtnl_lock to serialize raw_socket members between
raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use
ro->dev to decide whether to free receivers in dev_rcv_lists.
Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier")
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If TCA_FLOWER_CLASSID is specified in the netlink message, the code will
call tcf_bind_filter. However, if any error occurs after that, the code
should undo this by calling tcf_unbind_filter.
Fixes: 77b9900ef53a ("tc: introduce Flower classifier")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489fd2 ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.
Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.
Fixes: d34e3e181395 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
