summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2014-11-10ASoC: max98095: Move mutex to the driver levelLars-Peter Clausen
The max98095 uses the snd_soc_codec mutex to protect against concurrent access in some of its control put handlers. Move this mutex to the driver level so we can eventually remove the snd_soc_codec mutex. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10ASoC: ab8500-codec: Move control lock to the driver levelLars-Peter Clausen
The ab8500 driver uses a driver specific lock to protect concurrent access to some of the control put/get handlers and uses the snd_soc_codec mutex for some others. This patch updates the driver to consistently use the driver specific lock for all controls. This will allow us to eventually remove the snd_soc_codec mutex. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-10ASoC: tlv320aic3x: Add TDM supportPeter Ujfalusi
TDM support is achieved using DSP transfer mode and setting a programmable offset which specifies where data begins with respect to the frame sync. It requires 256-clock mode if CODEC is master (not currently supported in the driver). No additional dependency if CODEC is slave. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-09ASoC: tfa9879: New driver for NXP Semiconductors TFA9879 amplifier.Peter Rosin
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-08ASoC: wm9712/wm9713: Replace virtual registers with custom put/get callbacksLars-Peter Clausen
The wm9712/wm9713 has separate mixers for the left and the right channel, but the inputs to the mixers are enabled/disabled by the same control. Currently this is implemented by the driver by registering two virtual controls for each physical control, one for the left mixer and one for the right mixer. Using virtual registers will no longer work when the driver has been converted to regmap. This patch converts the driver to use controls with custom put/get callbacks instead which implement the logic making sure that the physical control is unmuted when either the left or the right control is unmuted. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-08Merge branches 'topic/wm9712' and 'topic/wm9713' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-wm971x
2014-11-07ASoC: rt5645: Add ASRC supportBard Liao
This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-07ASoC: rt5677: Use specific r/w function for DSP modeOder Chiou
In DSP mode, the register r/w should use the specific function to access that is invoked by address mapping of the DSP. The MX-65[1] is for switching DSP or codec mode. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: ssm4567: Add support for disabling the boost stageLars-Peter Clausen
This patch adds a switch to enable/disable boost stage of the output amplifier. Applications that know that they do not need the output amplifier boost stage can disable it to conserve a bit of power. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: ssm4567: Add support for setting the DAI format and TDM configurationLars-Peter Clausen
The SSM4567 has support for a couple of different DAI formats. In TDM mode it is also possible to select the TDM slot. This patch adds support for this by implementing the set_fmt and set_tdm_slot callbacks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: ssm4567: Add DAC high-pass-filter controlLars-Peter Clausen
Add a switch which can be used to enable/disable the DAC high-pass-filter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: rt5645: Add JD function supportBard Liao
rt5645 codec support jack detection function. The patch will set related registers if JD function is used. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: rt5670: change dapm routes of PLL connectionBard Liao
PLL should be powered up once filter power is on. So, "PLL1" should be connected to filters instead of DACs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: rt5670: correct the incorrect default valuesBard Liao
The patch corrects the incorrect default register values. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-11-06ASoC: rt286: fix comment styleBard Liao
Adds spaces around the /* */. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-06ASoC: rt286: set combo jack by dmiBard Liao
This patch enables combo jack configuration according to dmi. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: ad193x: Keep DAC output stage active in idleLars-Peter Clausen
Setting the DAC power-down bit for the ad193x will also disable the DAC output amplifier. This will cause audible clicks and pops when starting or stopping playback. To prevent this a new widget is introduced that controls the DAC power-down bit. This widget is connected to both the DAC and a newly introduced VMID widget. This makes sure that the DAC power-down bit is not set as long as a audio sink is connected to the DAC output. At the same time the PLL and SYSCLK will still be disabled when no playback or capture stream is active. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: rt5677: Minor coding style and typo fixOder Chiou
Minor coding style and typo fix Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: wm8995: Use table based DAPM and control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: wm8961: Use table based DAPM and control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: wm8737: Use table based DAPM and control setupLars-Peter Clausen
Makes the code a bit cleaner and shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: wl1273: Use table based control setupLars-Peter Clausen
Makes the code a bit shorter and cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: tas2552: Use table based DAPM setupLars-Peter Clausen
Makes the code a bit cleaner and shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05ASoC: sn95031: Use table based control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04ASoC: max98090: Different comp tables for different pclksDylan Reid
In addtion expand the table to handle other values of sysclk. Instead of making the table 3D, expand it to a more descriptive struct. The divisors are specified in Table 19 of the 98090 data sheet version 0p94. The dmic frequency was previously assumed. Instead make it explicit and configurable through device tree. This now handles independently set pclk and dmic frequency. Based on downstream work by Ralph Birt. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04Merge branch 'fix/max98090' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-max98090
2014-11-04ASoC: max98090: Correct pclk divisor settingsDylan Reid
The Baytrail-based chromebooks have a 20MHz mclk, the code was setting the divisor incorrectly in this case. According to the 98090 datasheet, the divisor should be set to DIV1 for 10 <= mclk <= 20. Correct this and the surrounding clock ranges as well to match the datasheet. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04ASoC: rt5645: make bias level more reasonaleBard Liao
This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-03Merge tag 'v3.18-rc3' into asoc-sgtl5000Mark Brown
Linux 3.18-rc3
2014-11-03ASoC: tlv320aic23: add dependencies on I2C/SPI_MASTERMax Filippov
This fixes build errors in configurations with I2C/SPI master disabled. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: cs42l51: depends on I2CRandy Dunlap
Fix build errors when CONFIG_I2C is not enabled by making the driver depend on I2C. ../sound/soc/codecs/cs42l51-i2c.c:55:1: warning: data definition has no type or storage class [enabled by default] module_i2c_driver(cs42l51_i2c_driver); ^ ../sound/soc/codecs/cs42l51-i2c.c:55:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] ../sound/soc/codecs/cs42l51-i2c.c:55:1: warning: parameter names (without types) in function declaration [enabled by default] ../sound/soc/codecs/cs42l51-i2c.c:45:26: warning: 'cs42l51_i2c_driver' defined but not used [-Wunused-variable] static struct i2c_driver cs42l51_i2c_driver = { ^ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9713: Use virtual control instead of virtual registerLars-Peter Clausen
The wm9713 currently implements the virtual control for the Mic B Source MUX using a virtual register. Replace this by using SOC_ENUM_SINGLE_VIRT(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9713: Move driver state struct allocation to driver probeLars-Peter Clausen
Resources for the device should be allocated in the device driver probe callback, rather than in the ASoC CODEC probe callback. E.g. one advantage is that we can use device managed allocations. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9713: Use table based control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9713: Cleanup printk usageLars-Peter Clausen
Use dev_err()/dev_warn() instead of printk(KERN_ERR/KERN_WARNING. This is common practice and makes it easy to find out which device generated the message. While we are at it also align the error messages with the other AC'97 drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9712: Use table based control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9712: Cleanup printk usageLars-Peter Clausen
Use dev_err() instead of printk(KERN_ERR. This is common practice and makes it easy to find out which device generated the message. While we are at it also align the error messages with the other AC'97 drivers. Also avoid printing two error messages when the reset fails. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9705: Use table based control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: wm9705: Cleanup printk usageLars-Peter Clausen
Use dev_err() instead of printk(KERN_ERR. This is common practice and makes it easy to find out which device generated the message. While we are at it also align the error messages with the other AC'97 drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: stac9766: Use table based control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: stac9766: Cleanup printk usageLars-Peter Clausen
Use dev_err() instead of printk(KERN_ERR. This is common practice and makes it easy to find out which device generated the message. While we are at it also align the error messages with the other AC'97 drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: ad1980: Use table based control setupLars-Peter Clausen
Makes the code a bit cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: ad1980: Cleanup printk usageLars-Peter Clausen
Use dev_err()/dev_warn() instead of printk(KERN_ERR/KERN_WARNING. This is common practice and makes it easy to find out which device generated the message. While we are at it also align the error messages with the other AC'97 drivers. Also remove the info message that is printed when the driver is probed, this is just noise in bootlog. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: ad1980: Remove unused headerLars-Peter Clausen
The constants defined in the ad1980 header are not used. So remove the file. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: tlv320aic23: make codecs selectable in KconfigMax Filippov
Now that manual selection of drivers for audio subsystem components is preferred AIC23 codec must be selectable in Kconfig to make it possible. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31ASoC: rt286: reduce power consumptionBard Liao
This patch will optimize the power consumption of rt286. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29ASoC: rt5645: Mark RT5645_TDM_CTRL_3 as readableFang, Yang A
amixer query fails due to it is not readable reigster Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28ASoC: rt5677: Add TDM channel mapping functionOder Chiou
It is for channel to slot mapping, and it is not only for 8 channels mapping, but also in 2, 4 and 6 channels mapping. If we want to use the 2 channels in the stereo2 adc path, we need to set the item "2/1/3/4" or "2/3/1/4". It also adds for stereo channel swap. It can map the sterero channels "L/R" to "R/L", "L/L" or R/R. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-28ASoC: cs42l51: make driver user-selectableThomas Petazzoni
Since we are removing the Armada 370 DB audio machine driver to use the 'simple-card' Device Tree binding, we can no longer select the CS42L51 codec driver using a Kconfig 'select', and we instead need it to be user-selectable. Therefore, this commit adds a prompt to make the CS42L51 I2C codec driver user-selectable. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 20:02:11 +0000